Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Bindings/display/tegra/nvidia,tegra20-dsi.yaml
new file mode 100644
index 0000000..59e1dc0
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-dsi.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Serial Interface
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - nvidia,tegra20-dsi
+ - nvidia,tegra30-dsi
+ - nvidia,tegra114-dsi
+ - nvidia,tegra124-dsi
+ - nvidia,tegra210-dsi
+ - nvidia,tegra186-dsi
+
+ - items:
+ - const: nvidia,tegra132-dsi
+ - const: nvidia,tegra124-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ minItems: 2
+ maxItems: 3
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: dsi
+
+ operating-points-v2: true
+
+ power-domains:
+ maxItems: 1
+
+ avdd-dsi-csi-supply:
+ description: phandle of a supply that powers the DSI controller
+
+ nvidia,mipi-calibrate:
+ description: Should contain a phandle and a specifier specifying
+ which pads are used by this DSI output and need to be
+ calibrated. See nvidia,tegra114-mipi.yaml for details.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+ nvidia,ddc-i2c-bus:
+ description: phandle of an I2C controller used for DDC EDID
+ probing
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ nvidia,hpd-gpio:
+ description: specifies a GPIO used for hotplug detection
+ maxItems: 1
+
+ nvidia,edid:
+ description: supplies a binary EDID blob
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+
+ nvidia,panel:
+ description: phandle of a display panel
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ nvidia,ganged-mode:
+ description: contains a phandle to a second DSI controller to
+ gang up with in order to support up to 8 data lanes
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+ - $ref: ../dsi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-dsi
+ - nvidia,tegra30-dsi
+ then:
+ properties:
+ clocks:
+ items:
+ - description: DSI module clock
+ - description: input for the pixel clock
+
+ clock-names:
+ items:
+ - const: dsi
+ - const: parent
+ else:
+ properties:
+ clocks:
+ items:
+ - description: DSI module clock
+ - description: low-power module clock
+ - description: input for the pixel clock
+
+ clock-names:
+ items:
+ - const: dsi
+ - const: lp
+ - const: parent
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra186-dsi
+ then:
+ required:
+ - interrupts
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra186-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/tegra186-powergate.h>
+ #include <dt-bindings/reset/tegra186-reset.h>
+
+ dsi@15300000 {
+ compatible = "nvidia,tegra186-dsi";
+ reg = <0x15300000 0x10000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_DSI>,
+ <&bpmp TEGRA186_CLK_DSIA_LP>,
+ <&bpmp TEGRA186_CLK_PLLD>;
+ clock-names = "dsi", "lp", "parent";
+ resets = <&bpmp TEGRA186_RESET_DSI>;
+ reset-names = "dsi";
+
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+ };