Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Bindings/display/allwinner,sun4i-a10-display-backend.yaml
new file mode 100644
index 0000000..ba06d18
--- /dev/null
+++ b/Bindings/display/allwinner,sun4i-a10-display-backend.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Backend
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+description: |
+ The display engine backend exposes layers and sprites to the system.
+
+properties:
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-display-backend
+ - allwinner,sun5i-a13-display-backend
+ - allwinner,sun6i-a31-display-backend
+ - allwinner,sun7i-a20-display-backend
+ - allwinner,sun8i-a23-display-backend
+ - allwinner,sun8i-a33-display-backend
+ - allwinner,sun9i-a80-display-backend
+
+ reg:
+ minItems: 1
+ items:
+ - description: Display Backend registers
+ - description: SAT registers
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: be
+ - const: sat
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+ items:
+ - description: The backend interface clock
+ - description: The backend module clock
+ - description: The backend DRAM clock
+ - description: The SAT clock
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: ahb
+ - const: mod
+ - const: ram
+ - const: sat
+
+ resets:
+ minItems: 1
+ items:
+ - description: The Backend reset line
+ - description: The SAT reset line
+
+ reset-names:
+ minItems: 1
+ items:
+ - const: be
+ - const: sat
+
+ # FIXME: This should be made required eventually once every SoC will
+ # have the MBUS declared.
+ interconnects:
+ maxItems: 1
+
+ # FIXME: This should be made required eventually once every SoC will
+ # have the MBUS declared.
+ interconnect-names:
+ const: dma-mem
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Input endpoints of the controller.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output endpoints of the controller.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - ports
+
+additionalProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun8i-a33-display-backend
+
+then:
+ properties:
+ reg:
+ minItems: 2
+
+ reg-names:
+ minItems: 2
+
+ clocks:
+ minItems: 4
+
+ clock-names:
+ minItems: 4
+
+ resets:
+ minItems: 2
+
+ reset-names:
+ minItems: 2
+
+ required:
+ - reg-names
+ - reset-names
+
+else:
+ properties:
+ reg:
+ maxItems: 1
+
+ reg-names:
+ maxItems: 1
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ maxItems: 3
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ maxItems: 1
+
+examples:
+ - |
+ /*
+ * This comes from the clock/sun4i-a10-ccu.h and
+ * reset/sun4i-a10-ccu.h headers, but we can't include them since
+ * it would trigger a bunch of warnings for redefinitions of
+ * symbols with the other example.
+ */
+
+ #define CLK_AHB_DE_BE0 42
+ #define CLK_DRAM_DE_BE0 140
+ #define CLK_DE_BE0 144
+ #define RST_DE_BE0 5
+
+ display-backend@1e60000 {
+ compatible = "allwinner,sun4i-a10-display-backend";
+ reg = <0x01e60000 0x10000>;
+ interrupts = <47>;
+ clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+ <&ccu CLK_DRAM_DE_BE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_BE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_be0>;
+ };
+
+ endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&fe1_out_be0>;
+ };
+ };
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_be0>;
+ };
+
+ endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_be0>;
+ };
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ /*
+ * This comes from the clock/sun8i-a23-a33-ccu.h and
+ * reset/sun8i-a23-a33-ccu.h headers, but we can't include them
+ * since it would trigger a bunch of warnings for redefinitions of
+ * symbols with the other example.
+ */
+
+ #define CLK_BUS_DE_BE 40
+ #define CLK_BUS_SAT 46
+ #define CLK_DRAM_DE_BE 84
+ #define CLK_DE_BE 85
+ #define RST_BUS_DE_BE 21
+ #define RST_BUS_SAT 27
+
+ display-backend@1e60000 {
+ compatible = "allwinner,sun8i-a33-display-backend";
+ reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
+ reg-names = "be", "sat";
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
+ <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
+ clock-names = "ahb", "mod",
+ "ram", "sat";
+ resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
+ reset-names = "be", "sat";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&fe0_out_be0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ endpoint {
+ remote-endpoint = <&drc0_in_be0>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Bindings/display/allwinner,sun4i-a10-display-engine.yaml
new file mode 100644
index 0000000..e6088f3
--- /dev/null
+++ b/Bindings/display/allwinner,sun4i-a10-display-engine.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Pipeline
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+description: |
+ The display engine pipeline (and its entry point, since it can be
+ either directly the backend or the frontend) is represented as an
+ extra node.
+
+ The Allwinner A10 Display pipeline is composed of several components
+ that are going to be documented below:
+
+ For all connections between components up to the TCONs in the
+ display pipeline, when there are multiple components of the same
+ type at the same depth, the local endpoint ID must be the same as
+ the remote component's index. For example, if the remote endpoint is
+ Frontend 1, then the local endpoint ID must be 1.
+
+ Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0
+ [1] -- -- [1] [1] -- -- [1]
+ \ / \ /
+ X X
+ / \ / \
+ [0] -- -- [0] [0] -- -- [0]
+ Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1
+
+ For a two pipeline system such as the one depicted above, the lines
+ represent the connections between the components, while the numbers
+ within the square brackets corresponds to the ID of the local endpoint.
+
+ The same rule also applies to DE 2.0 mixer-TCON connections:
+
+ Mixer 0 [0] ----------- [0] TCON 0
+ [1] ---- ---- [1]
+ \ /
+ X
+ / \
+ [0] ---- ---- [0]
+ Mixer 1 [1] ----------- [1] TCON 1
+
+properties:
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-display-engine
+ - allwinner,sun5i-a10s-display-engine
+ - allwinner,sun5i-a13-display-engine
+ - allwinner,sun6i-a31-display-engine
+ - allwinner,sun6i-a31s-display-engine
+ - allwinner,sun7i-a20-display-engine
+ - allwinner,sun8i-a23-display-engine
+ - allwinner,sun8i-a33-display-engine
+ - allwinner,sun8i-a83t-display-engine
+ - allwinner,sun8i-h3-display-engine
+ - allwinner,sun8i-r40-display-engine
+ - allwinner,sun8i-v3s-display-engine
+ - allwinner,sun9i-a80-display-engine
+ - allwinner,sun20i-d1-display-engine
+ - allwinner,sun50i-a64-display-engine
+ - allwinner,sun50i-h6-display-engine
+
+ allwinner,pipelines:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ maxItems: 2
+ items:
+ maxItems: 1
+ description: |
+ Available display engine frontends (DE 1.0) or mixers (DE
+ 2.0/3.0) available.
+
+required:
+ - compatible
+ - allwinner,pipelines
+
+additionalProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun4i-a10-display-engine
+ - allwinner,sun6i-a31-display-engine
+ - allwinner,sun6i-a31s-display-engine
+ - allwinner,sun7i-a20-display-engine
+ - allwinner,sun8i-a83t-display-engine
+ - allwinner,sun8i-r40-display-engine
+ - allwinner,sun9i-a80-display-engine
+ - allwinner,sun20i-d1-display-engine
+ - allwinner,sun50i-a64-display-engine
+
+then:
+ properties:
+ allwinner,pipelines:
+ minItems: 2
+
+else:
+ properties:
+ allwinner,pipelines:
+ maxItems: 1
+
+examples:
+ - |
+ de: display-engine {
+ compatible = "allwinner,sun4i-a10-display-engine";
+ allwinner,pipelines = <&fe0>, <&fe1>;
+ };
+
+...
diff --git a/Bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Bindings/display/allwinner,sun4i-a10-display-frontend.yaml
new file mode 100644
index 0000000..98e8240
--- /dev/null
+++ b/Bindings/display/allwinner,sun4i-a10-display-frontend.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Display Engine Frontend
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+description: |
+ The display engine frontend does formats conversion, scaling,
+ deinterlacing and color space conversion.
+
+properties:
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-display-frontend
+ - allwinner,sun5i-a13-display-frontend
+ - allwinner,sun6i-a31-display-frontend
+ - allwinner,sun7i-a20-display-frontend
+ - allwinner,sun8i-a23-display-frontend
+ - allwinner,sun8i-a33-display-frontend
+ - allwinner,sun9i-a80-display-frontend
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: The frontend interface clock
+ - description: The frontend module clock
+ - description: The frontend DRAM clock
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: mod
+ - const: ram
+
+ # FIXME: This should be made required eventually once every SoC will
+ # have the MBUS declared.
+ interconnects:
+ maxItems: 1
+
+ # FIXME: This should be made required eventually once every SoC will
+ # have the MBUS declared.
+ interconnect-names:
+ const: dma-mem
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Input endpoints of the controller.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Output endpoints of the controller.
+
+ required:
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun4i-a10-ccu.h>
+ #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+ fe0: display-frontend@1e00000 {
+ compatible = "allwinner,sun4i-a10-display-frontend";
+ reg = <0x01e00000 0x20000>;
+ interrupts = <47>;
+ clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+ <&ccu CLK_DRAM_DE_FE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_DE_FE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe0_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_fe0>;
+ };
+
+ fe0_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_fe0>;
+ };
+ };
+ };
+ };
+
+
+...
diff --git a/Bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Bindings/display/allwinner,sun4i-a10-hdmi.yaml
new file mode 100644
index 0000000..55703ca
--- /dev/null
+++ b/Bindings/display/allwinner,sun4i-a10-hdmi.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 HDMI Controller
+
+description: |
+ The HDMI Encoder supports the HDMI video and audio outputs, and does
+ CEC. It is one end of the pipeline.
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: allwinner,sun4i-a10-hdmi
+ - const: allwinner,sun5i-a10s-hdmi
+ - const: allwinner,sun6i-a31-hdmi
+ - items:
+ - const: allwinner,sun7i-a20-hdmi
+ - const: allwinner,sun5i-a10s-hdmi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ oneOf:
+ - items:
+ - description: The HDMI interface clock
+ - description: The HDMI module clock
+ - description: The first video PLL
+ - description: The second video PLL
+
+ - items:
+ - description: The HDMI interface clock
+ - description: The HDMI module clock
+ - description: The HDMI DDC clock
+ - description: The first video PLL
+ - description: The second video PLL
+
+ clock-names:
+ oneOf:
+ - items:
+ - const: ahb
+ - const: mod
+ - const: pll-0
+ - const: pll-1
+
+ - items:
+ - const: ahb
+ - const: mod
+ - const: ddc
+ - const: pll-0
+ - const: pll-1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: DDC Transmission DMA Channel
+ - description: DDC Reception DMA Channel
+ - description: Audio Transmission DMA Channel
+
+ dma-names:
+ items:
+ - const: ddc-tx
+ - const: ddc-rx
+ - const: audio-tx
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Input endpoints of the controller.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Output endpoints of the controller. Usually an HDMI
+ connector.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun6i-a31-hdmi
+
+then:
+ properties:
+ clocks:
+ minItems: 5
+
+ clock-names:
+ minItems: 5
+
+ required:
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun4i-a10-ccu.h>
+ #include <dt-bindings/dma/sun4i-a10.h>
+ #include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+ hdmi: hdmi@1c16000 {
+ compatible = "allwinner,sun4i-a10-hdmi";
+ reg = <0x01c16000 0x1000>;
+ interrupts = <58>;
+ clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+ <&ccu CLK_PLL_VIDEO0_2X>,
+ <&ccu CLK_PLL_VIDEO1_2X>;
+ clock-names = "ahb", "mod", "pll-0", "pll-1";
+ dmas = <&dma SUN4I_DMA_NORMAL 16>,
+ <&dma SUN4I_DMA_NORMAL 16>,
+ <&dma SUN4I_DMA_DEDICATED 24>;
+ dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hdmi_in_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_out_hdmi>;
+ };
+
+ hdmi_in_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/allwinner,sun4i-a10-tcon.yaml b/Bindings/display/allwinner,sun4i-a10-tcon.yaml
new file mode 100644
index 0000000..724d93b
--- /dev/null
+++ b/Bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -0,0 +1,677 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Timings Controller (TCON)
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+description: |
+ The TCON acts as a timing controller for RGB, LVDS and TV
+ interfaces.
+
+properties:
+ "#clock-cells":
+ const: 0
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun4i-a10-tcon
+ - const: allwinner,sun5i-a13-tcon
+ - const: allwinner,sun6i-a31-tcon
+ - const: allwinner,sun6i-a31s-tcon
+ - const: allwinner,sun7i-a20-tcon
+ - const: allwinner,sun8i-a23-tcon
+ - const: allwinner,sun8i-a33-tcon
+ - const: allwinner,sun8i-a83t-tcon-lcd
+ - const: allwinner,sun8i-a83t-tcon-tv
+ - const: allwinner,sun8i-r40-tcon-tv
+ - const: allwinner,sun8i-v3s-tcon
+ - const: allwinner,sun9i-a80-tcon-lcd
+ - const: allwinner,sun9i-a80-tcon-tv
+ - const: allwinner,sun20i-d1-tcon-lcd
+ - const: allwinner,sun20i-d1-tcon-tv
+
+ - items:
+ - enum:
+ - allwinner,sun7i-a20-tcon0
+ - allwinner,sun7i-a20-tcon1
+ - const: allwinner,sun7i-a20-tcon
+
+ - items:
+ - enum:
+ - allwinner,sun50i-a64-tcon-lcd
+ - const: allwinner,sun8i-a83t-tcon-lcd
+
+ - items:
+ - enum:
+ - allwinner,sun8i-h3-tcon-tv
+ - allwinner,sun50i-a64-tcon-tv
+ - const: allwinner,sun8i-a83t-tcon-tv
+
+ - items:
+ - enum:
+ - allwinner,sun50i-h6-tcon-tv
+ - const: allwinner,sun8i-r40-tcon-tv
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ minItems: 1
+ maxItems: 4
+
+ clock-output-names:
+ description:
+ Name of the LCD pixel clock created.
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+
+ resets:
+ anyOf:
+ - items:
+ - description: TCON Reset Line
+
+ - items:
+ - description: TCON Reset Line
+ - description: TCON LVDS Reset Line
+
+ - items:
+ - description: TCON Reset Line
+ - description: TCON eDP Reset Line
+
+ - items:
+ - description: TCON Reset Line
+ - description: TCON eDP Reset Line
+ - description: TCON LVDS Reset Line
+
+ reset-names:
+ oneOf:
+ - const: lcd
+
+ - items:
+ - const: lcd
+ - const: lvds
+
+ - items:
+ - const: lcd
+ - const: edp
+
+ - items:
+ - const: lcd
+ - const: edp
+ - const: lvds
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Input endpoints of the controller.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: |
+ Output endpoints of the controller.
+
+ patternProperties:
+ "^endpoint(@[0-9])$":
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ allwinner,tcon-channel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ TCON can have 1 or 2 channels, usually with the
+ first channel being used for the panels interfaces
+ (RGB, LVDS, etc.), and the second being used for the
+ outputs that require another controller (TV Encoder,
+ HDMI, etc.).
+
+ If that property is present, specifies the TCON
+ channel the endpoint is associated to. If that
+ property is not present, the endpoint number will be
+ used as the channel number.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - ports
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun4i-a10-tcon
+ - allwinner,sun5i-a13-tcon
+ - allwinner,sun7i-a20-tcon
+
+ then:
+ properties:
+ clocks:
+ minItems: 3
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: tcon-ch0
+ - const: tcon-ch1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun6i-a31-tcon
+ - allwinner,sun6i-a31s-tcon
+
+ then:
+ properties:
+ clocks:
+ minItems: 4
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: tcon-ch0
+ - const: tcon-ch1
+ - const: lvds-alt
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-a23-tcon
+ - allwinner,sun8i-a33-tcon
+
+ then:
+ properties:
+ clocks:
+ minItems: 3
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: tcon-ch0
+ - const: lvds-alt
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-a83t-tcon-lcd
+ - allwinner,sun8i-v3s-tcon
+ - allwinner,sun9i-a80-tcon-lcd
+ - allwinner,sun20i-d1-tcon-lcd
+
+ then:
+ properties:
+ clocks:
+ minItems: 2
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: tcon-ch0
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-a83t-tcon-tv
+ - allwinner,sun8i-r40-tcon-tv
+ - allwinner,sun9i-a80-tcon-tv
+ - allwinner,sun20i-d1-tcon-tv
+
+ then:
+ properties:
+ clocks:
+ minItems: 2
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: tcon-ch1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun5i-a13-tcon
+ - allwinner,sun6i-a31-tcon
+ - allwinner,sun6i-a31s-tcon
+ - allwinner,sun7i-a20-tcon
+ - allwinner,sun8i-a23-tcon
+ - allwinner,sun8i-a33-tcon
+ - allwinner,sun8i-v3s-tcon
+ - allwinner,sun9i-a80-tcon-lcd
+ - allwinner,sun4i-a10-tcon
+ - allwinner,sun8i-a83t-tcon-lcd
+ - allwinner,sun20i-d1-tcon-lcd
+
+ then:
+ required:
+ - "#clock-cells"
+ - clock-output-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun6i-a31-tcon
+ - allwinner,sun6i-a31s-tcon
+ - allwinner,sun8i-a23-tcon
+ - allwinner,sun8i-a33-tcon
+ - allwinner,sun8i-a83t-tcon-lcd
+ - allwinner,sun20i-d1-tcon-lcd
+
+ then:
+ properties:
+ resets:
+ minItems: 2
+
+ reset-names:
+ items:
+ - const: lcd
+ - const: lvds
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun9i-a80-tcon-lcd
+
+ then:
+ properties:
+ resets:
+ minItems: 3
+
+ reset-names:
+ items:
+ - const: lcd
+ - const: edp
+ - const: lvds
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun9i-a80-tcon-tv
+
+ then:
+ properties:
+ resets:
+ minItems: 2
+
+ reset-names:
+ items:
+ - const: lcd
+ - const: edp
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun4i-a10-tcon
+ - allwinner,sun5i-a13-tcon
+ - allwinner,sun6i-a31-tcon
+ - allwinner,sun6i-a31s-tcon
+ - allwinner,sun7i-a20-tcon
+ - allwinner,sun8i-a23-tcon
+ - allwinner,sun8i-a33-tcon
+
+ then:
+ required:
+ - dmas
+
+examples:
+ - |
+ #include <dt-bindings/dma/sun4i-a10.h>
+
+ /*
+ * This comes from the clock/sun4i-a10-ccu.h and
+ * reset/sun4i-a10-ccu.h headers, but we can't include them since
+ * it would trigger a bunch of warnings for redefinitions of
+ * symbols with the other example.
+ */
+
+ #define CLK_AHB_LCD0 56
+ #define CLK_TCON0_CH0 149
+ #define CLK_TCON0_CH1 155
+ #define RST_TCON0 11
+
+ lcd-controller@1c0c000 {
+ compatible = "allwinner,sun4i-a10-tcon";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <44>;
+ resets = <&ccu RST_TCON0>;
+ reset-names = "lcd";
+ clocks = <&ccu CLK_AHB_LCD0>,
+ <&ccu CLK_TCON0_CH0>,
+ <&ccu CLK_TCON0_CH1>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1";
+ clock-output-names = "tcon0-pixel-clock";
+ #clock-cells = <0>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_tcon0>;
+ };
+
+ endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_out_tcon0>;
+ };
+ };
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
+ };
+ };
+ };
+
+ #undef CLK_AHB_LCD0
+ #undef CLK_TCON0_CH0
+ #undef CLK_TCON0_CH1
+ #undef RST_TCON0
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ /*
+ * This comes from the clock/sun6i-a31-ccu.h and
+ * reset/sun6i-a31-ccu.h headers, but we can't include them since
+ * it would trigger a bunch of warnings for redefinitions of
+ * symbols with the other example.
+ */
+
+ #define CLK_PLL_MIPI 15
+ #define CLK_AHB1_LCD0 47
+ #define CLK_LCD0_CH0 127
+ #define CLK_LCD0_CH1 129
+ #define RST_AHB1_LCD0 27
+ #define RST_AHB1_LVDS 41
+
+ lcd-controller@1c0c000 {
+ compatible = "allwinner,sun6i-a31-tcon";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma 11>;
+ resets = <&ccu RST_AHB1_LCD0>, <&ccu RST_AHB1_LVDS>;
+ reset-names = "lcd", "lvds";
+ clocks = <&ccu CLK_AHB1_LCD0>,
+ <&ccu CLK_LCD0_CH0>,
+ <&ccu CLK_LCD0_CH1>,
+ <&ccu CLK_PLL_MIPI>;
+ clock-names = "ahb",
+ "tcon-ch0",
+ "tcon-ch1",
+ "lvds-alt";
+ clock-output-names = "tcon0-pixel-clock";
+ #clock-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc0_out_tcon0>;
+ };
+
+ endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&drc1_out_tcon0>;
+ };
+ };
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon0>;
+ allwinner,tcon-channel = <1>;
+ };
+ };
+ };
+ };
+
+ #undef CLK_PLL_MIPI
+ #undef CLK_AHB1_LCD0
+ #undef CLK_LCD0_CH0
+ #undef CLK_LCD0_CH1
+ #undef RST_AHB1_LCD0
+ #undef RST_AHB1_LVDS
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ /*
+ * This comes from the clock/sun9i-a80-ccu.h and
+ * reset/sun9i-a80-ccu.h headers, but we can't include them since
+ * it would trigger a bunch of warnings for redefinitions of
+ * symbols with the other example.
+ */
+
+ #define CLK_BUS_LCD0 102
+ #define CLK_LCD0 58
+ #define RST_BUS_LCD0 22
+ #define RST_BUS_EDP 24
+ #define RST_BUS_LVDS 25
+
+ lcd-controller@3c00000 {
+ compatible = "allwinner,sun9i-a80-tcon-lcd";
+ reg = <0x03c00000 0x10000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
+ clock-names = "ahb", "tcon-ch0";
+ resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>, <&ccu RST_BUS_LVDS>;
+ reset-names = "lcd", "edp", "lvds";
+ clock-output-names = "tcon0-pixel-clock";
+ #clock-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&drc0_out_tcon0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ #undef CLK_BUS_TCON0
+ #undef CLK_TCON0
+ #undef RST_BUS_TCON0
+ #undef RST_BUS_EDP
+ #undef RST_BUS_LVDS
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ /*
+ * This comes from the clock/sun8i-a83t-ccu.h and
+ * reset/sun8i-a83t-ccu.h headers, but we can't include them since
+ * it would trigger a bunch of warnings for redefinitions of
+ * symbols with the other example.
+ */
+
+ #define CLK_BUS_TCON0 36
+ #define CLK_TCON0 85
+ #define RST_BUS_TCON0 22
+ #define RST_BUS_LVDS 31
+
+ lcd-controller@1c0c000 {
+ compatible = "allwinner,sun8i-a83t-tcon-lcd";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+ clock-names = "ahb", "tcon-ch0";
+ clock-output-names = "tcon-pixel-clock";
+ #clock-cells = <0>;
+ resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+ reset-names = "lcd", "lvds";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mixer0_out_tcon0>;
+ };
+
+ endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mixer1_out_tcon0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ #undef CLK_BUS_TCON0
+ #undef CLK_TCON0
+ #undef RST_BUS_TCON0
+ #undef RST_BUS_LVDS
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ /*
+ * This comes from the clock/sun8i-r40-ccu.h and
+ * reset/sun8i-r40-ccu.h headers, but we can't include them since
+ * it would trigger a bunch of warnings for redefinitions of
+ * symbols with the other example.
+ */
+
+ #define CLK_BUS_TCON_TV0 73
+ #define RST_BUS_TCON_TV0 49
+
+ tcon_tv0: lcd-controller@1c73000 {
+ compatible = "allwinner,sun8i-r40-tcon-tv";
+ reg = <0x01c73000 0x1000>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
+ clock-names = "ahb", "tcon-ch1";
+ resets = <&ccu RST_BUS_TCON_TV0>;
+ reset-names = "lcd";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+ };
+
+ endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+ };
+ };
+
+ tcon_tv0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+ };
+ };
+ };
+ };
+
+ #undef CLK_BUS_TCON_TV0
+ #undef RST_BUS_TCON_TV0
+
+...
diff --git a/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
new file mode 100644
index 0000000..c39e90a
--- /dev/null
+++ b/Bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 TV Encoder
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ compatible:
+ const: allwinner,sun4i-a10-tv-encoder
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The first port should be the input endpoint, usually coming from the
+ associated TCON.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ tve0: tv-encoder@1c0a000 {
+ compatible = "allwinner,sun4i-a10-tv-encoder";
+ reg = <0x01c0a000 0x1000>;
+ clocks = <&ahb_gates 34>;
+ resets = <&tcon_ch0_clk 0>;
+
+ port {
+ tve0_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_tve0>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/allwinner,sun6i-a31-drc.yaml b/Bindings/display/allwinner,sun6i-a31-drc.yaml
new file mode 100644
index 0000000..895506d
--- /dev/null
+++ b/Bindings/display/allwinner,sun6i-a31-drc.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Dynamic Range Controller
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+description: |
+ The DRC (Dynamic Range Controller) allows to dynamically adjust
+ pixel brightness/contrast based on histogram measurements for LCD
+ content adaptive backlight control.
+
+properties:
+ compatible:
+ enum:
+ - allwinner,sun6i-a31-drc
+ - allwinner,sun6i-a31s-drc
+ - allwinner,sun8i-a23-drc
+ - allwinner,sun8i-a33-drc
+ - allwinner,sun9i-a80-drc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: The DRC interface clock
+ - description: The DRC module clock
+ - description: The DRC DRAM clock
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: mod
+ - const: ram
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Input endpoints of the controller.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Output endpoints of the controller.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ #include <dt-bindings/clock/sun6i-a31-ccu.h>
+ #include <dt-bindings/reset/sun6i-a31-ccu.h>
+
+ drc0: drc@1e70000 {
+ compatible = "allwinner,sun6i-a31-drc";
+ reg = <0x01e70000 0x10000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
+ <&ccu CLK_DRAM_DRC0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&ccu RST_AHB1_DRC0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ drc0_in: port@0 {
+ reg = <0>;
+
+ drc0_in_be0: endpoint {
+ remote-endpoint = <&be0_out_drc0>;
+ };
+ };
+
+ drc0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ drc0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_drc0>;
+ };
+
+ drc0_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_drc0>;
+ };
+ };
+ };
+ };
+
+
+...
diff --git a/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
new file mode 100644
index 0000000..c731fbd
--- /dev/null
+++ b/Bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI-DSI Controller
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - allwinner,sun6i-a31-mipi-dsi
+ - allwinner,sun50i-a64-mipi-dsi
+ - allwinner,sun50i-a100-mipi-dsi
+ - items:
+ - const: allwinner,sun20i-d1-mipi-dsi
+ - const: allwinner,sun50i-a100-mipi-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: mod
+
+ resets:
+ maxItems: 1
+
+ vcc-dsi-supply:
+ description: VCC-DSI power supply of the DSI encoder
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: dphy
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The port should be the input endpoint, usually coming from the
+ associated TCON.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - phys
+ - phy-names
+ - resets
+ - port
+
+allOf:
+ - $ref: dsi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun6i-a31-mipi-dsi
+ - allwinner,sun50i-a100-mipi-dsi
+
+ then:
+ properties:
+ clocks:
+ minItems: 2
+
+ required:
+ - clock-names
+
+ else:
+ properties:
+ clocks:
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun6i-a31-mipi-dsi
+ - allwinner,sun50i-a64-mipi-dsi
+
+ then:
+ required:
+ - vcc-dsi-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ dsi0: dsi@1ca0000 {
+ compatible = "allwinner,sun6i-a31-mipi-dsi";
+ reg = <0x01ca0000 0x1000>;
+ interrupts = <0 89 4>;
+ clocks = <&ccu 23>, <&ccu 96>;
+ clock-names = "bus", "mod";
+ resets = <&ccu 4>;
+ phys = <&dphy0>;
+ phy-names = "dphy";
+ vcc-dsi-supply = <®_dcdc1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+ reg = <0>;
+ power-supply = <®_display>;
+ reset-gpios = <&r_pio 0 5 1>; /* PL05 */
+ backlight = <&pwm_bl>;
+ };
+
+ port {
+ dsi0_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_dsi0>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
new file mode 100644
index 0000000..b75c1ec
--- /dev/null
+++ b/Bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner Display Engine 2.0 Mixer
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - allwinner,sun8i-a83t-de2-mixer-0
+ - allwinner,sun8i-a83t-de2-mixer-1
+ - allwinner,sun8i-h3-de2-mixer-0
+ - allwinner,sun8i-r40-de2-mixer-0
+ - allwinner,sun8i-r40-de2-mixer-1
+ - allwinner,sun8i-v3s-de2-mixer
+ - allwinner,sun20i-d1-de2-mixer-0
+ - allwinner,sun20i-d1-de2-mixer-1
+ - allwinner,sun50i-a64-de2-mixer-0
+ - allwinner,sun50i-a64-de2-mixer-1
+ - allwinner,sun50i-h6-de3-mixer-0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: The mixer interface clock
+ - description: The mixer module clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: mod
+
+ iommus:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Input endpoints of the controller.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Output endpoints of the controller.
+
+ required:
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun8i-de2.h>
+ #include <dt-bindings/reset/sun8i-de2.h>
+
+ mixer0: mixer@1100000 {
+ compatible = "allwinner,sun8i-a83t-de2-mixer-0";
+ reg = <0x01100000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER0>,
+ <&display_clocks CLK_MIXER0>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_MIXER0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mixer0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_mixer0>;
+ };
+
+ mixer0_out_tcon1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon1_in_mixer0>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
new file mode 100644
index 0000000..60fd927
--- /dev/null
+++ b/Bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -0,0 +1,254 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t DWC HDMI TX Encoder
+
+description: |
+ The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller
+ IP with Allwinner\'s own PHY IP. It supports audio and video outputs
+ and CEC.
+
+ These DT bindings follow the Synopsys DWC HDMI TX bindings defined
+ in bridge/synopsys,dw-hdmi.yaml with the following device-specific
+ properties.
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 0
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun8i-a83t-dw-hdmi
+ - const: allwinner,sun50i-h6-dw-hdmi
+
+ - items:
+ - enum:
+ - allwinner,sun8i-h3-dw-hdmi
+ - allwinner,sun8i-r40-dw-hdmi
+ - allwinner,sun50i-a64-dw-hdmi
+ - const: allwinner,sun8i-a83t-dw-hdmi
+
+ reg:
+ maxItems: 1
+
+ reg-io-width:
+ const: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+ items:
+ - description: Bus Clock
+ - description: Register Clock
+ - description: TMDS Clock
+ - description: HDMI CEC Clock
+ - description: HDCP Clock
+ - description: HDCP Bus Clock
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: iahb
+ - const: isfr
+ - const: tmds
+ - const: cec
+ - const: hdcp
+ - const: hdcp-bus
+
+ resets:
+ minItems: 1
+ items:
+ - description: HDMI Controller Reset
+ - description: HDCP Reset
+
+ reset-names:
+ minItems: 1
+ items:
+ - const: ctrl
+ - const: hdcp
+
+ phys:
+ maxItems: 1
+ description:
+ Phandle to the DWC HDMI PHY.
+
+ phy-names:
+ const: phy
+
+ hvcc-supply:
+ description:
+ The VCC power supply of the controller
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Input endpoints of the controller. Usually the associated
+ TCON.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Output endpoints of the controller. Usually an HDMI
+ connector.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - reg-io-width
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - phys
+ - phy-names
+ - ports
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun50i-h6-dw-hdmi
+
+then:
+ properties:
+ clocks:
+ minItems: 6
+
+ clock-names:
+ minItems: 6
+
+ resets:
+ minItems: 2
+
+ reset-names:
+ minItems: 2
+
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ /*
+ * This comes from the clock/sun8i-a83t-ccu.h and
+ * reset/sun8i-a83t-ccu.h headers, but we can't include them since
+ * it would trigger a bunch of warnings for redefinitions of
+ * symbols with the other example.
+ */
+ #define CLK_BUS_HDMI 39
+ #define CLK_HDMI 93
+ #define CLK_HDMI_SLOW 94
+ #define RST_BUS_HDMI1 26
+
+ hdmi@1ee0000 {
+ compatible = "allwinner,sun8i-a83t-dw-hdmi";
+ reg = <0x01ee0000 0x10000>;
+ reg-io-width = <1>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+ <&ccu CLK_HDMI>;
+ clock-names = "iahb", "isfr", "tmds";
+ resets = <&ccu RST_BUS_HDMI1>;
+ reset-names = "ctrl";
+ phys = <&hdmi_phy>;
+ phy-names = "phy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ /* Cleanup after ourselves */
+ #undef CLK_BUS_HDMI
+ #undef CLK_HDMI
+ #undef CLK_HDMI_SLOW
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ /*
+ * This comes from the clock/sun50i-h6-ccu.h and
+ * reset/sun50i-h6-ccu.h headers, but we can't include them since
+ * it would trigger a bunch of warnings for redefinitions of
+ * symbols with the other example.
+ */
+ #define CLK_BUS_HDMI 126
+ #define CLK_BUS_HDCP 137
+ #define CLK_HDMI 123
+ #define CLK_HDMI_SLOW 124
+ #define CLK_HDMI_CEC 125
+ #define CLK_HDCP 136
+ #define RST_BUS_HDMI_SUB 57
+ #define RST_BUS_HDCP 62
+
+ hdmi@6000000 {
+ compatible = "allwinner,sun50i-h6-dw-hdmi";
+ reg = <0x06000000 0x10000>;
+ reg-io-width = <1>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
+ <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
+ <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
+ clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
+ "hdcp-bus";
+ resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
+ reset-names = "ctrl", "hdcp";
+ phys = <&hdmi_phy>;
+ phy-names = "phy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/Bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
new file mode 100644
index 0000000..1b47f3d
--- /dev/null
+++ b/Bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83t HDMI PHY
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#phy-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - allwinner,sun8i-a83t-hdmi-phy
+ - allwinner,sun8i-h3-hdmi-phy
+ - allwinner,sun8i-r40-hdmi-phy
+ - allwinner,sun50i-a64-hdmi-phy
+ - allwinner,sun50i-h6-hdmi-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+ - description: Parent of the PHY clock
+ - description: Second possible parent of the PHY clock
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: bus
+ - const: mod
+ - const: pll-0
+ - const: pll-1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: phy
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-r40-hdmi-phy
+
+then:
+ properties:
+ clocks:
+ minItems: 4
+
+ clock-names:
+ minItems: 4
+
+else:
+ if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-h3-hdmi-phy
+ - allwinner,sun50i-a64-hdmi-phy
+
+ then:
+ properties:
+ clocks:
+ minItems: 3
+
+ clock-names:
+ minItems: 3
+
+ else:
+ properties:
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ maxItems: 2
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+ #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+ hdmi_phy: hdmi-phy@1ef0000 {
+ compatible = "allwinner,sun8i-a83t-hdmi-phy";
+ reg = <0x01ef0000 0x10000>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
+ clock-names = "bus", "mod";
+ resets = <&ccu RST_BUS_HDMI0>;
+ reset-names = "phy";
+ #phy-cells = <0>;
+ };
+
+...
diff --git a/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml
new file mode 100644
index 0000000..7d849c4
--- /dev/null
+++ b/Bindings/display/allwinner,sun8i-r40-tcon-top.yaml
@@ -0,0 +1,329 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner R40 TCON TOP
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+description: |
+ TCON TOPs main purpose is to configure whole display pipeline. It
+ determines relationships between mixers and TCONs, selects source
+ TCON for HDMI, muxes LCD and TV encoder GPIO output, selects TV
+ encoder clock source and contains additional TV TCON and DSI gates.
+
+ It allows display pipeline to be configured in very different ways:
+
+ / LCD0/LVDS0
+ / [0] TCON-LCD0
+ | \ MIPI DSI
+ mixer0 |
+ \ / [1] TCON-LCD1 - LCD1/LVDS1
+ TCON-TOP
+ / \ [2] TCON-TV0 [0] - TVE0/RGB
+ mixer1 | \
+ | TCON-TOP - HDMI
+ | /
+ \ [3] TCON-TV1 [1] - TVE1/RGB
+
+ Note that both TCON TOP references same physical unit. Both mixers
+ can be connected to any TCON. Not all TCON TOP variants support all
+ features.
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ compatible:
+ enum:
+ - allwinner,sun8i-r40-tcon-top
+ - allwinner,sun20i-d1-tcon-top
+ - allwinner,sun50i-h6-tcon-top
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 6
+
+ clock-names:
+ minItems: 2
+ maxItems: 6
+
+ clock-output-names:
+ minItems: 1
+ maxItems: 3
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Input endpoint for Mixer 0 mux.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Output endpoint for Mixer 0 mux
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Input endpoint for Mixer 1 mux.
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Output endpoint for Mixer 1 mux
+
+ port@4:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Input endpoint for HDMI mux.
+
+ port@5:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Output endpoint for HDMI mux
+
+ required:
+ - port@0
+ - port@1
+ - port@4
+ - port@5
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - clock-output-names
+ - resets
+ - ports
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun8i-r40-tcon-top
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: The TCON TOP interface clock
+ - description: The TCON TOP TV0 clock
+ - description: The TCON TOP TVE0 clock
+ - description: The TCON TOP TV1 clock
+ - description: The TCON TOP TVE1 clock
+ - description: The TCON TOP MIPI DSI clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: tcon-tv0
+ - const: tve0
+ - const: tcon-tv1
+ - const: tve1
+ - const: dsi
+
+ clock-output-names:
+ items:
+ - description: TCON TV0 output clock name
+ - description: TCON TV1 output clock name
+ - description: DSI output clock name
+
+ ports:
+ required:
+ - port@2
+ - port@3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun20i-d1-tcon-top
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: The TCON TOP interface clock
+ - description: The TCON TOP TV0 clock
+ - description: The TCON TOP TVE0 clock
+ - description: The TCON TOP MIPI DSI clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: tcon-tv0
+ - const: tve0
+ - const: dsi
+
+ clock-output-names:
+ items:
+ - description: TCON TV0 output clock name
+ - description: DSI output clock name
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun50i-h6-tcon-top
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: The TCON TOP interface clock
+ - description: The TCON TOP TV0 clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: tcon-tv0
+
+ clock-output-names:
+ items:
+ - description: TCON TV0 output clock name
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ #include <dt-bindings/clock/sun8i-r40-ccu.h>
+ #include <dt-bindings/reset/sun8i-r40-ccu.h>
+
+ tcon_top: tcon-top@1c70000 {
+ compatible = "allwinner,sun8i-r40-tcon-top";
+ reg = <0x01c70000 0x1000>;
+ clocks = <&ccu CLK_BUS_TCON_TOP>,
+ <&ccu CLK_TCON_TV0>,
+ <&ccu CLK_TVE0>,
+ <&ccu CLK_TCON_TV1>,
+ <&ccu CLK_TVE1>,
+ <&ccu CLK_DSI_DPHY>;
+ clock-names = "bus",
+ "tcon-tv0",
+ "tve0",
+ "tcon-tv1",
+ "tve1",
+ "dsi";
+ clock-output-names = "tcon-top-tv0",
+ "tcon-top-tv1",
+ "tcon-top-dsi";
+ resets = <&ccu RST_BUS_TCON_TOP>;
+ #clock-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon_top_mixer0_in: port@0 {
+ reg = <0>;
+
+ tcon_top_mixer0_in_mixer0: endpoint {
+ remote-endpoint = <&mixer0_out_tcon_top>;
+ };
+ };
+
+ tcon_top_mixer0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+ reg = <0>;
+ };
+
+ tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+ reg = <1>;
+ };
+
+ tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+ };
+
+ tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
+ };
+ };
+
+ tcon_top_mixer1_in: port@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ tcon_top_mixer1_in_mixer1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mixer1_out_tcon_top>;
+ };
+ };
+
+ tcon_top_mixer1_out: port@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+ reg = <0>;
+ };
+
+ tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+ reg = <1>;
+ };
+
+ tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+ };
+
+ tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
+ };
+ };
+
+ tcon_top_hdmi_in: port@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon_tv0_out_tcon_top>;
+ };
+
+ tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&tcon_tv1_out_tcon_top>;
+ };
+ };
+
+ tcon_top_hdmi_out: port@5 {
+ reg = <5>;
+
+ tcon_top_hdmi_out_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_tcon_top>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/allwinner,sun9i-a80-deu.yaml b/Bindings/display/allwinner,sun9i-a80-deu.yaml
new file mode 100644
index 0000000..193afee
--- /dev/null
+++ b/Bindings/display/allwinner,sun9i-a80-deu.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 Detail Enhancement Unit
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+description: |
+ The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC,
+ can sharpen the display content in both luma and chroma channels.
+
+properties:
+ compatible:
+ const: allwinner,sun9i-a80-deu
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: The DEU interface clock
+ - description: The DEU module clock
+ - description: The DEU DRAM clock
+
+ clock-names:
+ items:
+ - const: ahb
+ - const: mod
+ - const: ram
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Input endpoints of the controller.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Output endpoints of the controller.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ #include <dt-bindings/clock/sun9i-a80-de.h>
+ #include <dt-bindings/reset/sun9i-a80-de.h>
+
+ deu0: deu@3300000 {
+ compatible = "allwinner,sun9i-a80-deu";
+ reg = <0x03300000 0x40000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&de_clocks CLK_BUS_DEU0>,
+ <&de_clocks CLK_IEP_DEU0>,
+ <&de_clocks CLK_DRAM_DEU0>;
+ clock-names = "ahb",
+ "mod",
+ "ram";
+ resets = <&de_clocks RST_DEU0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ deu0_in: port@0 {
+ reg = <0>;
+
+ deu0_in_fe0: endpoint {
+ remote-endpoint = <&fe0_out_deu0>;
+ };
+ };
+
+ deu0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ deu0_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_deu0>;
+ };
+
+ deu0_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_deu0>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/amlogic,meson-dw-hdmi.yaml b/Bindings/display/amlogic,meson-dw-hdmi.yaml
new file mode 100644
index 0000000..0c85894
--- /dev/null
+++ b/Bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: /schemas/sound/dai-common.yaml#
+
+description: |
+ The Amlogic Meson Synopsys Designware Integration is composed of
+ - A Synopsys DesignWare HDMI Controller IP
+ - A TOP control block controlling the Clocks and PHY
+ - A custom HDMI PHY in order to convert video to TMDS signal
+ ___________________________________
+ | HDMI TOP |<= HPD
+ |___________________________________|
+ | | |
+ | Synopsys HDMI | HDMI PHY |=> TMDS
+ | Controller |________________|
+ |___________________________________|<=> DDC
+
+ The HDMI TOP block only supports HPD sensing.
+ The Synopsys HDMI Controller interrupt is routed through the
+ TOP Block interrupt.
+ Communication to the TOP Block and the Synopsys HDMI Controller is done
+ via a pair of dedicated addr+read/write registers.
+ The HDMI PHY is configured by registers in the HHI register block.
+
+ Pixel data arrives in "4:4:4" format from the VENC block and the VPU HDMI mux
+ selects either the ENCI encoder for the 576i or 480i formats or the ENCP
+ encoder for all the other formats including interlaced HD formats.
+
+ The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate
+ DVI timings for the HDMI controller.
+
+ Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare
+ HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF
+ audio source interfaces.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,meson-gxbb-dw-hdmi # GXBB (S905)
+ - amlogic,meson-gxl-dw-hdmi # GXL (S905X, S905D)
+ - amlogic,meson-gxm-dw-hdmi # GXM (S912)
+ - const: amlogic,meson-gx-dw-hdmi
+ - enum:
+ - amlogic,meson-g12a-dw-hdmi # G12A (S905X2, S905Y2, S905D2)
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+
+ clock-names:
+ items:
+ - const: isfr
+ - const: iahb
+ - const: venci
+
+ resets:
+ minItems: 3
+
+ reset-names:
+ items:
+ - const: hdmitx_apb
+ - const: hdmitx
+ - const: hdmitx_phy
+
+ hdmi-supply:
+ description: phandle to an external 5V regulator to power the HDMI logic
+
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node pointing to the VENC Input port node.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node pointing to the TMDS Output port node.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ "#sound-dai-cells":
+ const: 0
+
+ sound-name-prefix: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - port@0
+ - port@1
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ hdmi_tx: hdmi-tx@c883a000 {
+ compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ reg = <0xc883a000 0x1c>;
+ interrupts = <57>;
+ resets = <&reset_apb>, <&reset_hdmitx>, <&reset_hdmitx_phy>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clk_isfr>, <&clk_iahb>, <&clk_venci>;
+ clock-names = "isfr", "iahb", "venci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VPU VENC Input */
+ hdmi_tx_venc_port: port@0 {
+ reg = <0>;
+
+ hdmi_tx_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+
+ /* TMDS Output */
+ hdmi_tx_tmds_port: port@1 {
+ reg = <1>;
+
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
diff --git a/Bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml b/Bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
new file mode 100644
index 0000000..a3428f0
--- /dev/null
+++ b/Bindings/display/amlogic,meson-g12a-dw-mipi-dsi.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/amlogic,meson-g12a-dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic specific extensions to the Synopsys Designware MIPI DSI Host Controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+ The Amlogic Meson Synopsys Designware Integration is composed of
+ - A Synopsys DesignWare MIPI DSI Host Controller IP
+ - A TOP control block controlling the Clocks & Resets of the IP
+
+allOf:
+ - $ref: dsi-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-g12a-dw-mipi-dsi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 3
+ maxItems: 4
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: pclk
+ - const: bit
+ - const: px
+ - const: meas
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: top
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: dphy
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input node to receive pixel data.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI output node to panel.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - phys
+ - phy-names
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ dsi@6000 {
+ compatible = "amlogic,meson-g12a-dw-mipi-dsi";
+ reg = <0x6000 0x400>;
+ resets = <&reset_top>;
+ reset-names = "top";
+ clocks = <&clk_pclk>, <&bit_clk>, <&clk_px>;
+ clock-names = "pclk", "bit", "px";
+ phys = <&mipi_dphy>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VPU VENC Input */
+ mipi_dsi_venc_port: port@0 {
+ reg = <0>;
+
+ mipi_dsi_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ /* DSI Output */
+ mipi_dsi_panel_port: port@1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/amlogic,meson-vpu.yaml b/Bindings/display/amlogic,meson-vpu.yaml
new file mode 100644
index 0000000..cb0a90f
--- /dev/null
+++ b/Bindings/display/amlogic,meson-vpu.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson Display Controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+ The Amlogic Meson Display controller is composed of several components
+ that are going to be documented below
+
+ DMC|---------------VPU (Video Processing Unit)----------------|------HHI------|
+ | vd1 _______ _____________ _________________ | |
+ D |-------| |----| | | | | HDMI PLL |
+ D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK |
+ R |-------| |----| Processing | | | | |
+ | osd2 | | | |---| Enci ----------|----|-----VDAC------|
+ R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----|
+ A | osd1 | | | Blenders | | Encl ----------|----|---------------|
+ M |-------|______|----|____________| |________________| | |
+ ___|__________________________________________________________|_______________|
+
+
+ VIU: Video Input Unit
+ ---------------------
+
+ The Video Input Unit is in charge of the pixel scanout from the DDR memory.
+ It fetches the frames addresses, stride and parameters from the "Canvas" memory.
+ This part is also in charge of the CSC (Colorspace Conversion).
+ It can handle 2 OSD Planes and 2 Video Planes.
+
+ VPP: Video Post Processing
+ --------------------------
+
+ The Video Post Processing is in charge of the scaling and blending of the
+ various planes into a single pixel stream.
+ There is a special "pre-blending" used by the video planes with a dedicated
+ scaler and a "post-blending" to merge with the OSD Planes.
+ The OSD planes also have a dedicated scaler for one of the OSD.
+
+ VENC: Video Encoders
+ --------------------
+
+ The VENC is composed of the multiple pixel encoders
+ - ENCI : Interlace Video encoder for CVBS and Interlace HDMI
+ - ENCP : Progressive Video Encoder for HDMI
+ - ENCL : LCD LVDS Encoder
+ The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock
+ tree and provides the scanout clock to the VPP and VIU.
+ The ENCI is connected to a single VDAC for Composite Output.
+ The ENCI and ENCP are connected to an on-chip HDMI Transceiver.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - amlogic,meson-gxbb-vpu # GXBB (S905)
+ - amlogic,meson-gxl-vpu # GXL (S905X, S905D)
+ - amlogic,meson-gxm-vpu # GXM (S912)
+ - const: amlogic,meson-gx-vpu
+ - enum:
+ - amlogic,meson-g12a-vpu # G12A (S905X2, S905Y2, S905D2)
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: vpu
+ - const: hhi
+
+ interrupts:
+ maxItems: 1
+
+ amlogic,canvas:
+ description: should point to a canvas provider node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ power-domains:
+ maxItems: 1
+ description: phandle to the associated power domain
+
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node pointing to the CVBS VDAC port node.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node pointing to the HDMI-TX port node.
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node pointing to the DPI port node (e.g. DSI or LVDS transceiver).
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - port@0
+ - port@1
+ - "#address-cells"
+ - "#size-cells"
+ - amlogic,canvas
+
+additionalProperties: false
+
+examples:
+ - |
+ vpu: vpu@d0100000 {
+ compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+ reg = <0xd0100000 0x100000>, <0xc883c000 0x1000>;
+ reg-names = "vpu", "hhi";
+ interrupts = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ amlogic,canvas = <&canvas>;
+
+ /* CVBS VDAC output port */
+ port@0 {
+ reg = <0>;
+
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ };
+ };
+
+ /* HDMI TX output port */
+ port@1 {
+ reg = <1>;
+
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_tx_in>;
+ };
+ };
+ };
diff --git a/Bindings/display/arm,hdlcd.yaml b/Bindings/display/arm,hdlcd.yaml
new file mode 100644
index 0000000..9a30e90
--- /dev/null
+++ b/Bindings/display/arm,hdlcd.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm HDLCD display controller
+
+maintainers:
+ - Liviu Dudau <Liviu.Dudau@arm.com>
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ The Arm HDLCD is a display controller found on several development platforms
+ produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an
+ RGB streamer that reads the data from a framebuffer and sends it to a single
+ digital encoder (DVI or HDMI).
+
+properties:
+ compatible:
+ const: arm,hdlcd
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ const: pxlclk
+
+ clocks:
+ maxItems: 1
+ description: The input reference for the pixel clock.
+
+ memory-region:
+ maxItems: 1
+ description:
+ Phandle to a node describing memory to be used for the framebuffer.
+ If not present, the framebuffer may be located anywhere in memory.
+
+ iommus:
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ unevaluatedProperties: false
+ description:
+ Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - port
+
+examples:
+ - |
+ hdlcd@2b000000 {
+ compatible = "arm,hdlcd";
+ reg = <0x2b000000 0x1000>;
+ interrupts = <0 85 4>;
+ clocks = <&oscclk5>;
+ clock-names = "pxlclk";
+ port {
+ hdlcd_output: endpoint {
+ remote-endpoint = <&hdmi_enc_input>;
+ };
+ };
+ };
+
+ /* HDMI encoder on I2C bus */
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ port {
+ hdmi_enc_input: endpoint {
+ remote-endpoint = <&hdlcd_output>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/arm,komeda.yaml b/Bindings/display/arm,komeda.yaml
new file mode 100644
index 0000000..3ad3eef
--- /dev/null
+++ b/Bindings/display/arm,komeda.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,komeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Komeda display processor
+
+maintainers:
+ - Liviu Dudau <Liviu.Dudau@arm.com>
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ The Arm Mali D71 display processor supports up to two displays with up
+ to a 4K resolution each. Each pipeline can be composed of up to four
+ layers. It is typically connected to a digital display connector like HDMI.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: arm,mali-d32
+ - const: arm,mali-d71
+ - const: arm,mali-d71
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ const: aclk
+
+ clocks:
+ maxItems: 1
+ description: The main DPU processor clock
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ memory-region:
+ maxItems: 1
+ description:
+ Phandle to a node describing memory to be used for the framebuffer.
+ If not present, the framebuffer may be located anywhere in memory.
+
+ iommus:
+ description:
+ The stream IDs for each of the used pipelines, each four IDs for the
+ four layers, plus one for the write-back stream.
+ minItems: 5
+ maxItems: 10
+
+patternProperties:
+ '^pipeline@[01]$':
+ type: object
+ additionalProperties: false
+ description:
+ clocks
+
+ properties:
+ reg:
+ enum: [ 0, 1 ]
+
+ clock-names:
+ const: pxclk
+
+ clocks:
+ maxItems: 1
+ description: The input reference for the pixel clock.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+ - pipeline@0
+
+examples:
+ - |
+ display@c00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,mali-d71";
+ reg = <0xc00000 0x20000>;
+ interrupts = <168>;
+ clocks = <&dpu_aclk>;
+ clock-names = "aclk";
+ iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
+ <&smmu 8>,
+ <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
+ <&smmu 9>;
+
+ dp0_pipe0: pipeline@0 {
+ clocks = <&fpgaosc2>;
+ clock-names = "pxclk";
+ reg = <0>;
+
+ port {
+ dp0_pipe0_out: endpoint {
+ remote-endpoint = <&db_dvi0_in>;
+ };
+ };
+ };
+
+ dp0_pipe1: pipeline@1 {
+ clocks = <&fpgaosc2>;
+ clock-names = "pxclk";
+ reg = <1>;
+
+ port {
+ dp0_pipe1_out: endpoint {
+ remote-endpoint = <&db_dvi1_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/arm,malidp.yaml b/Bindings/display/arm,malidp.yaml
new file mode 100644
index 0000000..9181257
--- /dev/null
+++ b/Bindings/display/arm,malidp.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,malidp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Mali Display Processor (Mali-DP)
+
+maintainers:
+ - Liviu Dudau <Liviu.Dudau@arm.com>
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ The following bindings apply to a family of Display Processors sold as
+ licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+ DP650 processors that offer multiple composition layers, support for
+ rotation and scaling output.
+
+properties:
+ compatible:
+ enum:
+ - arm,mali-dp500
+ - arm,mali-dp550
+ - arm,mali-dp650
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description:
+ The interrupt used by the Display Engine (DE). Can be shared with
+ the interrupt for the Scaling Engine (SE), but it will have to be
+ listed individually.
+ - description:
+ The interrupt used by the Scaling Engine (SE). Can be shared with
+ the interrupt for the Display Engine (DE), but it will have to be
+ listed individually.
+
+ interrupt-names:
+ items:
+ - const: DE
+ - const: SE
+
+ clock-names:
+ items:
+ - const: pxlclk
+ - const: mclk
+ - const: aclk
+ - const: pclk
+
+ clocks:
+ items:
+ - description: the pixel clock feeding the output PLL of the processor
+ - description: the main processor clock
+ - description: the AXI interface clock
+ - description: the APB interface clock
+
+ memory-region:
+ maxItems: 1
+ description:
+ Phandle to a node describing memory to be used for the framebuffer.
+ If not present, the framebuffer may be located anywhere in memory.
+
+ arm,malidp-output-port-lines:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description:
+ Number of output lines/bits for each colour channel.
+ items:
+ - description: number of output lines for the red channel (R)
+ - description: number of output lines for the green channel (G)
+ - description: number of output lines for the blue channel (B)
+
+ arm,malidp-arqos-value:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Quality-of-Service value for the display engine FIFOs, to write
+ into the RQOS register of the DP500.
+ See the ARM Mali-DP500 TRM for details on the encoding.
+ If omitted, the RQOS register will not be changed.
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ unevaluatedProperties: false
+ description:
+ Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - port
+ - arm,malidp-output-port-lines
+
+examples:
+ - |
+ dp0: malidp@6f200000 {
+ compatible = "arm,mali-dp650";
+ reg = <0x6f200000 0x20000>;
+ memory-region = <&display_reserved>;
+ interrupts = <168>, <168>;
+ interrupt-names = "DE", "SE";
+ clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+ clock-names = "pxlclk", "mclk", "aclk", "pclk";
+ arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+ arm,malidp-arqos-value = <0xd000d000>;
+
+ port {
+ dp0_output: endpoint {
+ remote-endpoint = <&tda998x_2_input>;
+ };
+ };
+ };
+...
diff --git a/Bindings/display/arm,pl11x.yaml b/Bindings/display/arm,pl11x.yaml
new file mode 100644
index 0000000..6cc9045
--- /dev/null
+++ b/Bindings/display/arm,pl11x.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,pl11x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm PrimeCell Color LCD Controller PL110/PL111
+
+maintainers:
+ - Liviu Dudau <Liviu.Dudau@arm.com>
+ - Andre Przywara <andre.przywara@arm.com>
+
+description:
+ The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out
+ a framebuffer region in system memory, and creates timed signals for
+ a variety of LCD panels.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - arm,pl110
+ - arm,pl111
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - arm,pl110
+ - arm,pl111
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupt-names:
+ oneOf:
+ - const: combined
+ description:
+ The IP provides four individual interrupt lines, but also one
+ combined line. If the integration only connects this line to the
+ interrupt controller, this single interrupt is noted here.
+ - items:
+ - const: mbe # CLCDMBEINTR
+ - const: vcomp # CLCDVCOMPINTR
+ - const: lnbu # CLCDLNBUINTR
+ - const: fuf # CLCDFUFINTR
+
+ interrupts:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: clcdclk
+ - const: apb_pclk
+
+ clocks:
+ items:
+ - description: The CLCDCLK reference clock for the controller.
+ - description: The HCLK AHB slave clock for the register access.
+
+ memory-region:
+ maxItems: 1
+ description:
+ Phandle to a node describing memory to be used for the framebuffer.
+ If not present, the framebuffer may be located anywhere in memory.
+
+ max-memory-bandwidth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Maximum bandwidth in bytes per second that the cell's memory interface
+ can handle.
+ If not present, the memory interface is fast enough to handle all
+ possible video modes.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ description:
+ Output endpoint of the controller, connecting the LCD panel signals.
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ arm,pl11x,tft-r0g0b0-pads:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: index of CLD pad used for first red bit (R0)
+ - description: index of CLD pad used for first green bit (G0)
+ - description: index of CLD pad used for first blue bit (G0)
+ deprecated: true
+ description: |
+ DEPRECATED. An array of three 32-bit values, defining the way
+ CLD[23:0] pads are wired up.
+ The first value contains the index of the "CLD" external pin (pad)
+ used as R0 (first bit of the red component), the second value for
+ green, the third value for blue.
+ See also "LCD panel signal multiplexing details" paragraphs in the
+ PL110/PL111 Technical Reference Manuals.
+ This implicitly defines available color modes, for example:
+ - PL111 TFT 4:4:4 panel:
+ arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+ - PL110 TFT (1:)5:5:5 panel:
+ arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+ - PL111 TFT (1:)5:5:5 panel:
+ arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+ - PL111 TFT 5:6:5 panel:
+ arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+ - PL110 and PL111 TFT 8:8:8 panel:
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+ arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clock-names
+ - clocks
+ - port
+
+allOf:
+ - if:
+ properties:
+ interrupts:
+ minItems: 2
+ required:
+ - interrupts
+ then:
+ required:
+ - interrupt-names
+
+examples:
+ - |
+ clcd@10020000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x10020000 0x1000>;
+ interrupt-names = "combined";
+ interrupts = <44>;
+ clocks = <&oscclk1>, <&oscclk2>;
+ clock-names = "clcdclk", "apb_pclk";
+ max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+
+ port {
+ clcd_pads: endpoint {
+ remote-endpoint = <&clcd_panel>;
+ };
+ };
+ };
+
+ panel {
+ compatible = "arm,rtsm-display";
+
+ port {
+ clcd_panel: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+ };
+...
diff --git a/Bindings/display/armada/marvell,dove-lcd.txt b/Bindings/display/armada/marvell,dove-lcd.txt
new file mode 100644
index 0000000..46525ea
--- /dev/null
+++ b/Bindings/display/armada/marvell,dove-lcd.txt
@@ -0,0 +1,30 @@
+Device Tree bindings for Armada DRM CRTC driver
+
+Required properties:
+ - compatible: value should be "marvell,dove-lcd".
+ - reg: base address and size of the LCD controller
+ - interrupts: single interrupt number for the LCD controller
+ - port: video output port with endpoints, as described by graph.txt
+
+Optional properties:
+
+ - clocks: as described by clock-bindings.txt
+ - clock-names: as described by clock-bindings.txt
+ "axiclk" - axi bus clock for pixel clock
+ "plldivider" - pll divider clock for pixel clock
+ "ext_ref_clk0" - external clock 0 for pixel clock
+ "ext_ref_clk1" - external clock 1 for pixel clock
+
+Note: all clocks are optional but at least one must be specified.
+Further clocks may be added in the future according to requirements of
+different SoCs.
+
+Example:
+
+ lcd0: lcd-controller@820000 {
+ compatible = "marvell,dove-lcd";
+ reg = <0x820000 0x1000>;
+ interrupts = <47>;
+ clocks = <&si5351 0>;
+ clock-names = "ext_ref_clk_1";
+ };
diff --git a/Bindings/display/atmel,lcdc.txt b/Bindings/display/atmel,lcdc.txt
new file mode 100644
index 0000000..b5e355a
--- /dev/null
+++ b/Bindings/display/atmel,lcdc.txt
@@ -0,0 +1,87 @@
+Atmel LCDC Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible :
+ "atmel,at91sam9261-lcdc" ,
+ "atmel,at91sam9263-lcdc" ,
+ "atmel,at91sam9g10-lcdc" ,
+ "atmel,at91sam9g45-lcdc" ,
+ "atmel,at91sam9g45es-lcdc" ,
+ "atmel,at91sam9rl-lcdc" ,
+- reg : Should contain 1 register ranges(address and length).
+ Can contain an additional register range(address and length)
+ for fixed framebuffer memory. Useful for dedicated memories.
+- interrupts : framebuffer controller interrupt
+- display: a phandle pointing to the display node
+
+Required nodes:
+- display: a display node is required to initialize the lcd panel
+ This should be in the board dts.
+- default-mode: a videomode within the display with timing parameters
+ as specified below.
+
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+
+Example:
+
+ fb0: fb@00500000 {
+ compatible = "atmel,at91sam9g45-lcdc";
+ reg = <0x00500000 0x1000>;
+ interrupts = <23 3 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fb>;
+ display = <&display0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ };
+
+Example for fixed framebuffer memory:
+
+ fb0: fb@00500000 {
+ compatible = "atmel,at91sam9263-lcdc";
+ reg = <0x00700000 0x1000 0x70000000 0x200000>;
+ [...]
+ };
+
+Atmel LCDC Display
+-----------------------------------------------------
+Required properties (as per of_videomode_helper):
+
+ - atmel,dmacon: dma controller configuration
+ - atmel,lcdcon2: lcd controller configuration
+ - atmel,guard-time: lcd guard time (Delay in frame periods)
+ - bits-per-pixel: lcd panel bit-depth.
+
+Optional properties (as per of_videomode_helper):
+ - atmel,lcdcon-backlight: enable backlight
+ - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
+ - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
+ - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
+
+Example:
+ display0: display {
+ bits-per-pixel = <32>;
+ atmel,lcdcon-backlight;
+ atmel,dmacon = <0x1>;
+ atmel,lcdcon2 = <0x80008002>;
+ atmel,guard-time = <9>;
+ atmel,lcd-wiring-mode = <1>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <1>;
+ hfront-porch = <1>;
+ vback-porch = <40>;
+ vfront-porch = <1>;
+ hsync-len = <45>;
+ vsync-len = <1>;
+ };
+ };
+ };
diff --git a/Bindings/display/atmel/hlcdc-dc.txt b/Bindings/display/atmel/hlcdc-dc.txt
new file mode 100644
index 0000000..923aea2
--- /dev/null
+++ b/Bindings/display/atmel/hlcdc-dc.txt
@@ -0,0 +1,75 @@
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
+
+The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
+See ../../mfd/atmel-hlcdc.txt for more details.
+
+Required properties:
+ - compatible: value should be "atmel,hlcdc-display-controller"
+ - pinctrl-names: the pin control state names. Should contain "default".
+ - pinctrl-0: should contain the default pinctrl states.
+ - #address-cells: should be set to 1.
+ - #size-cells: should be set to 0.
+
+Required children nodes:
+ Children nodes are encoding available output ports and their connections
+ to external devices using the OF graph representation (see ../graph.txt).
+ At least one port node is required.
+
+Optional properties in grandchild nodes:
+ Any endpoint grandchild node may specify a desired video interface
+ according to ../../media/video-interfaces.txt, specifically
+ - bus-width: recognized values are <12>, <16>, <18> and <24>, and
+ override any output mode selection heuristic, forcing "rgb444",
+ "rgb565", "rgb666" and "rgb888" respectively.
+
+Example:
+
+ hlcdc: hlcdc@f0030000 {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
+
+Example 2: With a video interface override to force rgb565; as above
+but with these changes/additions:
+
+ &hlcdc {
+ hlcdc-display-controller {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
+
+ port@0 {
+ hlcdc_panel_output: endpoint@0 {
+ bus-width = <16>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/brcm,bcm2711-hdmi.yaml b/Bindings/display/brcm,bcm2711-hdmi.yaml
new file mode 100644
index 0000000..5b35adf
--- /dev/null
+++ b/Bindings/display/brcm,bcm2711-hdmi.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711 HDMI Controller
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2711-hdmi0
+ - brcm,bcm2711-hdmi1
+
+ reg:
+ items:
+ - description: HDMI controller register range
+ - description: DVP register range
+ - description: HDMI PHY register range
+ - description: Rate Manager register range
+ - description: Packet RAM register range
+ - description: Metadata RAM register range
+ - description: CSC register range
+ - description: CEC register range
+ - description: HD register range
+
+ reg-names:
+ items:
+ - const: hdmi
+ - const: dvp
+ - const: phy
+ - const: rm
+ - const: packet
+ - const: metadata
+ - const: csc
+ - const: cec
+ - const: hd
+
+ clocks:
+ items:
+ - description: The HDMI state machine clock
+ - description: The Pixel BVB clock
+ - description: The HDMI Audio parent clock
+ - description: The HDMI CEC parent clock
+
+ clock-names:
+ items:
+ - const: hdmi
+ - const: bvb
+ - const: audio
+ - const: cec
+
+ interrupts:
+ items:
+ - description: CEC TX interrupt
+ - description: CEC RX interrupt
+ - description: CEC stuck at low interrupt
+ - description: Wake-up interrupt
+ - description: Hotplug connected interrupt
+ - description: Hotplug removed interrupt
+
+ interrupt-names:
+ items:
+ - const: cec-tx
+ - const: cec-rx
+ - const: cec-low
+ - const: wakeup
+ - const: hpd-connected
+ - const: hpd-removed
+
+ ddc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: >
+ Phandle of the I2C controller used for DDC EDID probing
+
+ hpd-gpios:
+ maxItems: 1
+ description: >
+ The GPIO pin for the HDMI hotplug detect (if it doesn't appear
+ as an interrupt/status bit in the HDMI controller itself)
+
+ dmas:
+ maxItems: 1
+ description: >
+ Should contain one entry pointing to the DMA channel used to
+ transfer audio data.
+
+ dma-names:
+ const: audio-rx
+
+ resets:
+ maxItems: 1
+
+ wifi-2.4ghz-coexistence:
+ type: boolean
+ description: >
+ Should the pixel frequencies in the WiFi frequencies range be
+ avoided?
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - resets
+ - ddc
+
+additionalProperties: false
+
+examples:
+ - |
+ hdmi0: hdmi@7ef00700 {
+ compatible = "brcm,bcm2711-hdmi0";
+ reg = <0x7ef00700 0x300>,
+ <0x7ef00300 0x200>,
+ <0x7ef00f00 0x80>,
+ <0x7ef00f80 0x80>,
+ <0x7ef01b00 0x200>,
+ <0x7ef01f00 0x400>,
+ <0x7ef00200 0x80>,
+ <0x7ef04300 0x100>,
+ <0x7ef20000 0x100>;
+ reg-names = "hdmi",
+ "dvp",
+ "phy",
+ "rm",
+ "packet",
+ "metadata",
+ "csc",
+ "cec",
+ "hd";
+ clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+ clock-names = "hdmi", "bvb", "audio", "cec";
+ resets = <&dvp 0>;
+ ddc = <&ddc0>;
+ };
+
+...
diff --git a/Bindings/display/brcm,bcm2835-dpi.yaml b/Bindings/display/brcm,bcm2835-dpi.yaml
new file mode 100644
index 0000000..c9ad0ec
--- /dev/null
+++ b/Bindings/display/brcm,bcm2835-dpi.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) DPI Controller
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+
+properties:
+ compatible:
+ const: brcm,bcm2835-dpi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: The core clock the unit runs on
+ - description: The pixel clock that feeds the pixelvalve
+
+ clock-names:
+ items:
+ - const: core
+ - const: pixel
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port node with a single endpoint connecting to the panel.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm2835.h>
+
+ dpi: dpi@7e208000 {
+ compatible = "brcm,bcm2835-dpi";
+ reg = <0x7e208000 0x8c>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>,
+ <&clocks BCM2835_CLOCK_DPI>;
+ clock-names = "core", "pixel";
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/brcm,bcm2835-dsi0.yaml b/Bindings/display/brcm,bcm2835-dsi0.yaml
new file mode 100644
index 0000000..c8b2459
--- /dev/null
+++ b/Bindings/display/brcm,bcm2835-dsi0.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-dsi0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) DSI Controller
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+
+allOf:
+ - $ref: dsi-controller.yaml#
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ compatible:
+ enum:
+ - brcm,bcm2711-dsi1
+ - brcm,bcm2835-dsi0
+ - brcm,bcm2835-dsi1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: The DSI PLL clock feeding the DSI analog PHY
+ - description: The DSI ESC clock
+ - description: The DSI pixel clock
+
+ clock-names:
+ items:
+ - const: phy
+ - const: escape
+ - const: pixel
+
+ clock-output-names: true
+ # FIXME: The meta-schemas don't seem to allow it for now
+ # items:
+ # - description: The DSI byte clock for the PHY
+ # - description: The DSI DDR2 clock
+ # - description: The DSI DDR clock
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - clock-output-names
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm2835.h>
+
+ dsi1: dsi@7e700000 {
+ compatible = "brcm,bcm2835-dsi1";
+ reg = <0x7e700000 0x8c>;
+ interrupts = <2 12>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+
+ clocks = <&clocks BCM2835_PLLD_DSI1>,
+ <&clocks BCM2835_CLOCK_DSI1E>,
+ <&clocks BCM2835_CLOCK_DSI1P>;
+ clock-names = "phy", "escape", "pixel";
+
+ clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";
+
+ };
+
+...
diff --git a/Bindings/display/brcm,bcm2835-hdmi.yaml b/Bindings/display/brcm,bcm2835-hdmi.yaml
new file mode 100644
index 0000000..48c8cad
--- /dev/null
+++ b/Bindings/display/brcm,bcm2835-hdmi.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) HDMI Controller
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+
+properties:
+ compatible:
+ const: brcm,bcm2835-hdmi
+
+ reg:
+ items:
+ - description: HDMI register range
+ - description: HD register range
+
+ interrupts:
+ minItems: 2
+
+ clocks:
+ items:
+ - description: The pixel clock
+ - description: The HDMI state machine clock
+
+ clock-names:
+ items:
+ - const: pixel
+ - const: hdmi
+
+ ddc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: >
+ Phandle of the I2C controller used for DDC EDID probing
+
+ hpd-gpios:
+ maxItems: 1
+ description: >
+ The GPIO pin for the HDMI hotplug detect (if it doesn't appear
+ as an interrupt/status bit in the HDMI controller itself)
+
+ dmas:
+ maxItems: 1
+ description: >
+ Should contain one entry pointing to the DMA channel used to
+ transfer audio data.
+
+ dma-names:
+ const: audio-rx
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - ddc
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm2835.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ hdmi: hdmi@7e902000 {
+ compatible = "brcm,bcm2835-hdmi";
+ reg = <0x7e902000 0x600>,
+ <0x7e808000 0x100>;
+ interrupts = <2 8>, <2 9>;
+ ddc = <&i2c2>;
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+ clocks = <&clocks BCM2835_PLLH_PIX>,
+ <&clocks BCM2835_CLOCK_HSM>;
+ clock-names = "pixel", "hdmi";
+ };
+
+...
diff --git a/Bindings/display/brcm,bcm2835-hvs.yaml b/Bindings/display/brcm,bcm2835-hvs.yaml
new file mode 100644
index 0000000..2e8566f
--- /dev/null
+++ b/Bindings/display/brcm,bcm2835-hvs.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-hvs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) Hardware Video Scaler
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2711-hvs
+ - brcm,bcm2835-hvs
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: Core Clock
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm2711-hvs
+
+then:
+ required:
+ - clocks
+
+examples:
+ - |
+ hvs@7e400000 {
+ compatible = "brcm,bcm2835-hvs";
+ reg = <0x7e400000 0x6000>;
+ interrupts = <2 1>;
+ };
+
+...
diff --git a/Bindings/display/brcm,bcm2835-pixelvalve0.yaml b/Bindings/display/brcm,bcm2835-pixelvalve0.yaml
new file mode 100644
index 0000000..4e1ba03
--- /dev/null
+++ b/Bindings/display/brcm,bcm2835-pixelvalve0.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-pixelvalve0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) PixelValve
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2835-pixelvalve0
+ - brcm,bcm2835-pixelvalve1
+ - brcm,bcm2835-pixelvalve2
+ - brcm,bcm2711-pixelvalve0
+ - brcm,bcm2711-pixelvalve1
+ - brcm,bcm2711-pixelvalve2
+ - brcm,bcm2711-pixelvalve3
+ - brcm,bcm2711-pixelvalve4
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ pixelvalve@7e807000 {
+ compatible = "brcm,bcm2835-pixelvalve2";
+ reg = <0x7e807000 0x100>;
+ interrupts = <2 10>; /* pixelvalve */
+ };
+
+...
diff --git a/Bindings/display/brcm,bcm2835-txp.yaml b/Bindings/display/brcm,bcm2835-txp.yaml
new file mode 100644
index 0000000..bb18619
--- /dev/null
+++ b/Bindings/display/brcm,bcm2835-txp.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-txp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) TXP (writeback) Controller
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+
+properties:
+ compatible:
+ const: brcm,bcm2835-txp
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ txp: txp@7e004000 {
+ compatible = "brcm,bcm2835-txp";
+ reg = <0x7e004000 0x20>;
+ interrupts = <1 11>;
+ };
+
+...
diff --git a/Bindings/display/brcm,bcm2835-v3d.yaml b/Bindings/display/brcm,bcm2835-v3d.yaml
new file mode 100644
index 0000000..c55a821
--- /dev/null
+++ b/Bindings/display/brcm,bcm2835-v3d.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-v3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) V3D GPU
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2835-v3d
+ - brcm,cygnus-v3d
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ v3d: v3d@7ec00000 {
+ compatible = "brcm,bcm2835-v3d";
+ reg = <0x7ec00000 0x1000>;
+ interrupts = <1 10>;
+ };
+
+...
diff --git a/Bindings/display/brcm,bcm2835-vc4.yaml b/Bindings/display/brcm,bcm2835-vc4.yaml
new file mode 100644
index 0000000..49a5e04
--- /dev/null
+++ b/Bindings/display/brcm,bcm2835-vc4.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-vc4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) GPU
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+
+description: >
+ The VC4 device present on the Raspberry Pi includes a display system
+ with HDMI output and the HVS (Hardware Video Scaler) for compositing
+ display planes.
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2711-vc5
+ - brcm,bcm2835-vc4
+ - brcm,cygnus-vc4
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ vc4: gpu {
+ compatible = "brcm,bcm2835-vc4";
+ };
+
+...
diff --git a/Bindings/display/brcm,bcm2835-vec.yaml b/Bindings/display/brcm,bcm2835-vec.yaml
new file mode 100644
index 0000000..5d921e3
--- /dev/null
+++ b/Bindings/display/brcm,bcm2835-vec.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/brcm,bcm2835-vec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom VC4 (VideoCore4) VEC
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm2711-vec
+ - brcm,bcm2835-vec
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm2835.h>
+
+ vec: vec@7e806000 {
+ compatible = "brcm,bcm2835-vec";
+ reg = <0x7e806000 0x1000>;
+ clocks = <&clocks BCM2835_CLOCK_VEC>;
+ interrupts = <2 27>;
+ };
+
+...
diff --git a/Bindings/display/bridge/adi,adv7511.yaml b/Bindings/display/bridge/adi,adv7511.yaml
new file mode 100644
index 0000000..5bbe818
--- /dev/null
+++ b/Bindings/display/bridge/adi,adv7511.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7511/11W/13 HDMI Encoders
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+ The ADV7511, ADV7511W and ADV7513 are HDMI audio and video
+ transmitters compatible with HDMI 1.4 and DVI 1.0. They support color
+ space conversion, S/PDIF, CEC and HDCP. The transmitter input is
+ parallel RGB or YUV data.
+
+properties:
+ compatible:
+ enum:
+ - adi,adv7511
+ - adi,adv7511w
+ - adi,adv7513
+
+ reg:
+ description: |
+ I2C slave addresses.
+
+ The ADV7511/11W/13 internal registers are split into four pages
+ exposed through different I2C addresses, creating four register
+ maps. Each map has it own I2C address and acts as a standard slave
+ device on the I2C bus. The main address is mandatory, others are
+ optional and revert to defaults if not specified.
+ minItems: 1
+ maxItems: 4
+
+ reg-names:
+ description:
+ Names of maps with programmable addresses. It can contain any map
+ needing a non-default address.
+ minItems: 1
+ items:
+ - const: main
+ - const: edid
+ - const: cec
+ - const: packet
+
+ clocks:
+ description: Reference to the CEC clock.
+ maxItems: 1
+
+ clock-names:
+ const: cec
+
+ interrupts:
+ maxItems: 1
+
+ pd-gpios:
+ description: GPIO connected to the power down signal.
+ maxItems: 1
+
+ avdd-supply:
+ description: A 1.8V supply that powers up the AVDD pin.
+
+ dvdd-supply:
+ description: A 1.8V supply that powers up the DVDD pin.
+
+ pvdd-supply:
+ description: A 1.8V supply that powers up the PVDD pin.
+
+ dvdd-3v-supply:
+ description: A 3.3V supply that powers up the DVDD_3V pin.
+
+ bgvdd-supply:
+ description: A 1.8V supply that powers up the BGVDD pin.
+
+ adi,input-depth:
+ description: Number of bits per color component at the input.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 8, 10, 12 ]
+
+ adi,input-colorspace:
+ description: Input color space.
+ enum: [ rgb, yuv422, yuv444 ]
+
+ adi,input-clock:
+ description: |
+ Input clock type.
+ "1x": one clock cycle per pixel
+ "2x": two clock cycles per pixel
+ "dd": one clock cycle per pixel, data driven on both edges
+ enum: [ 1x, 2x, dd ]
+
+ adi,clock-delay:
+ description:
+ Video data clock delay relative to the pixel clock, in ps
+ (-1200ps .. 1600 ps).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ adi,embedded-sync:
+ description:
+ If defined, the input uses synchronization signals embedded in the
+ data stream (similar to BT.656).
+ type: boolean
+
+ adi,input-style:
+ description:
+ Input components arrangement variant as listed in the input
+ format tables in the datasheet.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1, 2, 3 ]
+
+ adi,input-justification:
+ description: Input bit justification.
+ enum: [ left, evenly, right ]
+
+ ports:
+ description:
+ The ADV7511(W)/13 has two video ports and one audio port.
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ description: Video port for the RGB or YUV input.
+ $ref: /schemas/graph.yaml#/properties/port
+
+ port@1:
+ description: Video port for the HDMI output.
+ $ref: /schemas/graph.yaml#/properties/port
+
+ port@2:
+ description: Audio port for the HDMI output.
+ $ref: /schemas/graph.yaml#/properties/port
+
+# adi,input-colorspace and adi,input-clock are required except in
+# "rgb 1x" and "yuv444 1x" modes, in which case they must not be
+# specified.
+if:
+ not:
+ properties:
+ adi,input-colorspace:
+ contains:
+ enum: [ rgb, yuv444 ]
+ adi,input-clock:
+ contains:
+ const: 1x
+
+then:
+ required:
+ - adi,input-style
+ - adi,input-justification
+
+else:
+ properties:
+ adi,input-style: false
+ adi,input-justification: false
+
+
+required:
+ - compatible
+ - reg
+ - ports
+ - adi,input-depth
+ - adi,input-colorspace
+ - adi,input-clock
+ - avdd-supply
+ - dvdd-supply
+ - pvdd-supply
+ - dvdd-3v-supply
+ - bgvdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0xe6500000>;
+
+ adv7511w: hdmi@39 {
+ compatible = "adi,adv7511w";
+ /*
+ * The EDID page will be accessible on address 0x66 on the I2C
+ * bus. All other maps continue to use their default addresses.
+ */
+ reg = <0x39>, <0x66>;
+ reg-names = "main", "edid";
+ interrupt-parent = <&gpio3>;
+ interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&cec_clock>;
+ clock-names = "cec";
+ avdd-supply = <&v1v8>;
+ dvdd-supply = <&v1v8>;
+ pvdd-supply = <&v1v8>;
+ dvdd-3v-supply = <&v3v3>;
+ bgvdd-supply = <&v1v8>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "yuv422";
+ adi,input-clock = "1x";
+
+ adi,input-style = <3>;
+ adi,input-justification = "right";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511w_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ codec_endpoint: endpoint {
+ remote-endpoint = <&i2s0_cpu_endpoint>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/adi,adv7533.yaml b/Bindings/display/bridge/adi,adv7533.yaml
new file mode 100644
index 0000000..df20a3c
--- /dev/null
+++ b/Bindings/display/bridge/adi,adv7533.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/adi,adv7533.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7533/35 HDMI Encoders
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+allOf:
+ - $ref: /schemas/sound/dai-common.yaml#
+
+description: |
+ The ADV7533 and ADV7535 are HDMI audio and video transmitters
+ compatible with HDMI 1.4 and DVI 1.0. They support color space
+ conversion, S/PDIF, CEC and HDCP. The transmitter input is MIPI DSI.
+
+properties:
+ compatible:
+ enum:
+ - adi,adv7533
+ - adi,adv7535
+
+ reg:
+ description: |
+ I2C slave addresses.
+
+ The ADV7533/35 internal registers are split into four pages
+ exposed through different I2C addresses, creating four register
+ maps. Each map has it own I2C address and acts as a standard slave
+ device on the I2C bus. The main address is mandatory, others are
+ optional and revert to defaults if not specified.
+ minItems: 1
+ maxItems: 4
+
+ reg-names:
+ description:
+ Names of maps with programmable addresses. It can contain any map
+ needing a non-default address.
+ minItems: 1
+ items:
+ - const: main
+ - const: edid
+ - const: cec
+ - const: packet
+
+ clocks:
+ description: Reference to the CEC clock.
+ maxItems: 1
+
+ clock-names:
+ const: cec
+
+ interrupts:
+ maxItems: 1
+
+ pd-gpios:
+ description: GPIO connected to the power down signal.
+ maxItems: 1
+
+ avdd-supply:
+ description: A 1.8V supply that powers up the AVDD pin.
+
+ dvdd-supply:
+ description: A 1.8V supply that powers up the DVDD pin.
+
+ pvdd-supply:
+ description: A 1.8V supply that powers up the PVDD pin.
+
+ a2vdd-supply:
+ description: A 1.8V supply that powers up the A2VDD pin.
+
+ v3p3-supply:
+ description: A 3.3V supply that powers up the V3P3 pin.
+
+ v1p2-supply:
+ description:
+ A supply that powers up the V1P2 pin. It can be either 1.2V
+ or 1.8V for ADV7533 but only 1.8V for ADV7535.
+
+ adi,disable-timing-generator:
+ description:
+ Disables the internal timing generator. The chip will rely on the
+ sync signals in the DSI data lanes, rather than generating its own
+ timings for HDMI output.
+ type: boolean
+
+ adi,dsi-lanes:
+ description: Number of DSI data lanes connected to the DSI host.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1, 2, 3, 4 ]
+
+ "#sound-dai-cells":
+ const: 0
+
+ ports:
+ description:
+ The ADV7533/35 has two video ports and one audio port.
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ description:
+ Video port for the DSI input. The remote endpoint phandle
+ should be a reference to a valid mipi_dsi_host_device.
+ $ref: /schemas/graph.yaml#/properties/port
+
+ port@1:
+ description: Video port for the HDMI output.
+ $ref: /schemas/graph.yaml#/properties/port
+
+ port@2:
+ description: Audio port for the HDMI output.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - ports
+ - adi,dsi-lanes
+ - avdd-supply
+ - dvdd-supply
+ - pvdd-supply
+ - a2vdd-supply
+ - v3p3-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0xe6500000>;
+
+ adv7533: hdmi@39 {
+ compatible = "adi,adv7533";
+ /*
+ * The EDID page will be accessible on address 0x66 on the I2C
+ * bus. All other maps continue to use their default addresses.
+ */
+ reg = <0x39>, <0x66>;
+ reg-names = "main", "edid";
+ interrupt-parent = <&gpio3>;
+ interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&cec_clock>;
+ clock-names = "cec";
+ adi,dsi-lanes = <4>;
+ avdd-supply = <&v1v8>;
+ dvdd-supply = <&v1v8>;
+ pvdd-supply = <&v1v8>;
+ a2vdd-supply = <&v1v8>;
+ v3p3-supply = <&v3v3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7533_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7533_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ codec_endpoint: endpoint {
+ remote-endpoint = <&i2s0_cpu_endpoint>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/analogix,anx7625.yaml b/Bindings/display/bridge/analogix,anx7625.yaml
new file mode 100644
index 0000000..a1ed100
--- /dev/null
+++ b/Bindings/display/bridge/analogix,anx7625.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analogix Semiconductor, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
+
+maintainers:
+ - Xin Ji <xji@analogixsemi.com>
+
+description: |
+ The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
+ designed for portable devices.
+
+properties:
+ compatible:
+ const: analogix,anx7625
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: used for interrupt pin B8.
+ maxItems: 1
+
+ enable-gpios:
+ description: used for power on chip control, POWER_EN pin D2.
+ maxItems: 1
+
+ reset-gpios:
+ description: used for reset chip control, RESET_N pin B7.
+ maxItems: 1
+
+ vdd10-supply:
+ description: Regulator that provides the supply 1.0V power.
+
+ vdd18-supply:
+ description: Regulator that provides the supply 1.8V power.
+
+ vdd33-supply:
+ description: Regulator that provides the supply 3.3V power.
+
+ analogix,lane0-swing:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 1
+ maxItems: 20
+ description:
+ an array of swing register setting for DP tx lane0 PHY.
+ Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+ Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+ Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
+ [Swing control] setting.
+ Registers 0~9, bit 3:0 is [Boost control], these bits control
+ post cursor manual, increase the [Boost control] to increase
+ Pre-emphasis value.
+ Registers 0~9, bit 6:4 is [Swing control], these bits control
+ swing manual, increase [Swing control] setting to add Vp-p value
+ for each Swing, Pre.
+ Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+ Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+ Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
+ [R Termination control] setting.
+ Registers 10~19, bit 4:0 is [R select control], these bits are
+ compensation manual, increase it can enhance IO driven strength
+ and Vp-p.
+ Registers 10~19, bit 5:6 is [R termination control], these bits
+ adjust 50ohm impedance of DP tx termination. 00:55 ohm,
+ 01:50 ohm(default), 10:45 ohm, 11:40 ohm.
+
+ analogix,lane1-swing:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 1
+ maxItems: 20
+ description:
+ an array of swing register setting for DP tx lane1 PHY.
+ DP TX lane1 swing register setting same with lane0
+ swing, please refer lane0-swing property description.
+
+ analogix,audio-enable:
+ type: boolean
+ description: let the driver enable audio HDMI codec function or not.
+
+ aux-bus:
+ $ref: /schemas/display/dp-aux-bus.yaml#
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ MIPI DSI/DPI input.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ type: object
+ additionalProperties: false
+
+ properties:
+ remote-endpoint: true
+
+ bus-type:
+ enum: [7]
+ default: 1
+
+ data-lanes: true
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for panel or connector.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vdd10-supply
+ - vdd18-supply
+ - vdd33-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ encoder@58 {
+ compatible = "analogix,anx7625";
+ reg = <0x58>;
+ enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+ vdd10-supply = <&pp1000_mipibrdg>;
+ vdd18-supply = <&pp1800_mipibrdg>;
+ vdd33-supply = <&pp3300_mipibrdg>;
+ analogix,audio-enable;
+ analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+ analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi2dp_bridge_in: port@0 {
+ reg = <0>;
+ anx7625_in: endpoint {
+ remote-endpoint = <&mipi_dsi>;
+ bus-type = <7>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+
+ mipi2dp_bridge_out: port@1 {
+ reg = <1>;
+ anx7625_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel {
+ compatible = "innolux,n125hce-gn1";
+ power-supply = <&pp3300_disp_x>;
+ backlight = <&backlight_lcd0>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&anx7625_out>;
+ };
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/analogix,anx7814.yaml b/Bindings/display/bridge/analogix,anx7814.yaml
new file mode 100644
index 0000000..4509c49
--- /dev/null
+++ b/Bindings/display/bridge/analogix,anx7814.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
+
+maintainers:
+ - Andrzej Hajda <andrzej.hajda@intel.com>
+ - Neil Armstrong <neil.armstrong@linaro.org>
+ - Robert Foss <robert.foss@linaro.org>
+
+properties:
+ compatible:
+ enum:
+ - analogix,anx7808
+ - analogix,anx7812
+ - analogix,anx7814
+ - analogix,anx7816
+ - analogix,anx7818
+
+ reg:
+ maxItems: 1
+ description: I2C address of the device.
+
+ interrupts:
+ maxItems: 1
+ description: Should contain the INTP interrupt.
+
+ hpd-gpios:
+ deprecated: true
+ maxItems: 1
+ description: Which GPIO to use for hpd.
+
+ pd-gpios:
+ maxItems: 1
+ description: Which GPIO to use for power down.
+
+ reset-gpios:
+ maxItems: 1
+ description: Which GPIO to use for reset.
+
+ dvdd10-supply:
+ description: Regulator for 1.0V digital core power.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for HDMI input.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for SlimPort, DisplayPort, eDP or MyDP output.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx7814: bridge@38 {
+ compatible = "analogix,anx7814";
+ reg = <0x38>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
+ pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ anx7814_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ anx7814_out: endpoint {
+ remote-endpoint = <&edp_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/analogix,dp.yaml b/Bindings/display/bridge/analogix,dp.yaml
new file mode 100644
index 0000000..62f0521
--- /dev/null
+++ b/Bindings/display/bridge/analogix,dp.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix Display Port bridge
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+properties:
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks: true
+
+ clock-names: true
+
+ phys: true
+
+ phy-names:
+ const: dp
+
+ force-hpd:
+ type: boolean
+ description:
+ Indicate driver need force hpd when hpd detect failed, this
+ is used for some eDP screen which don not have a hpd signal.
+
+ hpd-gpios:
+ description:
+ Hotplug detect GPIO.
+ Indicates which GPIO should be used for hotplug detection
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Input node to receive pixel data.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port node with one endpoint connected to a dp-connector node.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+ - ports
+
+additionalProperties: true
diff --git a/Bindings/display/bridge/anx6345.yaml b/Bindings/display/bridge/anx6345.yaml
new file mode 100644
index 0000000..514f588
--- /dev/null
+++ b/Bindings/display/bridge/anx6345.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/anx6345.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX6345 eDP Transmitter
+
+maintainers:
+ - Torsten Duwe <duwe@lst.de>
+
+description: |
+ The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
+ portable devices.
+
+properties:
+ compatible:
+ const: analogix,anx6345
+
+ reg:
+ maxItems: 1
+ description: base I2C address of the device
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active low reset
+
+ dvdd12-supply:
+ description: Regulator for 1.2V digital core power.
+
+ dvdd25-supply:
+ description: Regulator for 2.5V digital core power.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for LVTTL input
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for eDP output (panel or connector).
+ May be omitted if EDID works reliably.
+
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - dvdd12-supply
+ - dvdd25-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx6345: anx6345@38 {
+ compatible = "analogix,anx6345";
+ reg = <0x38>;
+ reset-gpios = <&pio42 1 /* GPIO_ACTIVE_LOW */>;
+ dvdd25-supply = <®_dldo2>;
+ dvdd12-supply = <®_fldo1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx6345_in: port@0 {
+ reg = <0>;
+ anx6345_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_anx6345>;
+ };
+ };
+
+ anx6345_out: port@1 {
+ reg = <1>;
+ anx6345_out_panel: endpoint {
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/cdns,dsi.yaml b/Bindings/display/bridge/cdns,dsi.yaml
new file mode 100644
index 0000000..2306032
--- /dev/null
+++ b/Bindings/display/bridge/cdns,dsi.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DSI bridge
+
+maintainers:
+ - Boris Brezillon <boris.brezillon@bootlin.com>
+
+description: |
+ CDNS DSI is a bridge device which converts DPI to DSI
+
+properties:
+ compatible:
+ enum:
+ - cdns,dsi
+ - ti,j721e-dsi
+
+ reg:
+ minItems: 1
+ items:
+ - description:
+ Register block for controller's registers.
+ - description:
+ Register block for wrapper settings registers in case of TI J7 SoCs.
+
+ clocks:
+ items:
+ - description: PSM clock, used by the IP
+ - description: sys clock, used by the IP
+
+ clock-names:
+ items:
+ - const: dsi_p_clk
+ - const: dsi_sys_clk
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: dphy
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: dsi_p_rst
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port representing the DSI output. It can have
+ at most 4 endpoints. The endpoint number is directly encoding
+ the DSI virtual channel used by this device.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Input port representing the DPI input.
+
+ required:
+ - port@1
+
+allOf:
+ - $ref: ../dsi-controller.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,j721e-dsi
+ then:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 2
+ power-domains:
+ maxItems: 1
+ else:
+ properties:
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ dsi@fd0c0000 {
+ compatible = "cdns,dsi";
+ reg = <0x0 0xfd0c0000 0x0 0x1000>;
+ clocks = <&pclk>, <&sysclk>;
+ clock-names = "dsi_p_clk", "dsi_sys_clk";
+ interrupts = <1>;
+ phys = <&dphy0>;
+ phy-names = "dphy";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&xxx_dpi_output>;
+ };
+ };
+ };
+
+ panel@0 {
+ compatible = "panasonic,vvx10f034n00";
+ reg = <0>;
+ power-supply = <&vcc_lcd_reg>;
+ };
+ };
+ };
+
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ dsi@fd0c0000 {
+ compatible = "cdns,dsi";
+ reg = <0x0 0xfd0c0000 0x0 0x1000>;
+ clocks = <&pclk>, <&sysclk>;
+ clock-names = "dsi_p_clk", "dsi_sys_clk";
+ interrupts = <1>;
+ phys = <&dphy1>;
+ phy-names = "dphy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dsi_panel_input>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&xxx_dpi_output>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/cdns,mhdp8546.yaml b/Bindings/display/bridge/cdns,mhdp8546.yaml
new file mode 100644
index 0000000..c2b3694
--- /dev/null
+++ b/Bindings/display/bridge/cdns,mhdp8546.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MHDP8546 bridge
+
+maintainers:
+ - Swapnil Jakhade <sjakhade@cadence.com>
+ - Yuti Amonkar <yamonkar@cadence.com>
+
+properties:
+ compatible:
+ enum:
+ - cdns,mhdp8546
+ - ti,j721e-mhdp8546
+
+ reg:
+ minItems: 1
+ items:
+ - description:
+ Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
+ The AUX and PMA registers are not part of this range, they are instead
+ included in the associated PHY.
+ - description:
+ Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
+ - description:
+ Register block of mhdptx sapb registers.
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: mhdptx
+ - const: j721e-intg
+ - const: mhdptx-sapb
+
+ clocks:
+ maxItems: 1
+ description:
+ DP bridge clock, used by the IP to know how to translate a number of
+ clock cycles into a time (which is used to comply with DP standard timings
+ and delays).
+
+ phys:
+ maxItems: 1
+ description:
+ phandle to the DisplayPort PHY.
+
+ phy-names:
+ items:
+ - const: dpphy
+
+ power-domains:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ First input port representing the DP bridge input.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Second input port representing the DP bridge input.
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Third input port representing the DP bridge input.
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Fourth input port representing the DP bridge input.
+
+ port@4:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port representing the DP bridge output.
+
+ required:
+ - port@0
+ - port@4
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,j721e-mhdp8546
+ then:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 3
+ reg-names:
+ minItems: 2
+ maxItems: 3
+ else:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 2
+ reg-names:
+ minItems: 1
+ maxItems: 2
+
+required:
+ - compatible
+ - clocks
+ - reg
+ - reg-names
+ - phys
+ - phy-names
+ - interrupts
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ mhdp: dp-bridge@f0fb000000 {
+ compatible = "cdns,mhdp8546";
+ reg = <0xf0 0xfb000000 0x0 0x1000000>;
+ reg-names = "mhdptx";
+ clocks = <&mhdp_clock>;
+ phys = <&dp_phy>;
+ phy-names = "dpphy";
+ interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dp_bridge_input: endpoint {
+ remote-endpoint = <&xxx_dpi_output>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ dp_bridge_output: endpoint {
+ remote-endpoint = <&xxx_dp_connector_input>;
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/bridge/chipone,icn6211.yaml b/Bindings/display/bridge/chipone,icn6211.yaml
new file mode 100644
index 0000000..5fb5437
--- /dev/null
+++ b/Bindings/display/bridge/chipone,icn6211.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
+
+maintainers:
+ - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+ ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.
+
+ It has a flexible configuration of MIPI DSI signal input and
+ produce RGB565, RGB666, RGB888 output format.
+
+properties:
+ compatible:
+ enum:
+ - chipone,icn6211
+
+ reg:
+ maxItems: 1
+ description: virtual channel number of a DSI peripheral
+
+ clock-names:
+ const: refclk
+
+ clocks:
+ maxItems: 1
+ description: |
+ Optional external clock connected to REF_CLK input.
+ The clock rate must be in 10..154 MHz range.
+
+ enable-gpios:
+ description: Bridge EN pin, chip is reset when EN is low.
+
+ vdd1-supply:
+ description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
+
+ vdd2-supply:
+ description: A 1.8V/2.5V/3.3V supply that power the PLL.
+
+ vdd3-supply:
+ description: A 1.8V/2.5V/3.3V supply that power the RGB output.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Video port for MIPI DSI input
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description: array of physical DSI data lane indexes.
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for MIPI DPI output (panel or connector).
+
+ required:
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@0 {
+ compatible = "chipone,icn6211";
+ reg = <0>;
+ enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ bridge_in_dsi: endpoint {
+ remote-endpoint = <&dsi_out_bridge>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ bridge_out_panel: endpoint {
+ remote-endpoint = <&panel_out_bridge>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/chrontel,ch7033.yaml b/Bindings/display/bridge/chrontel,ch7033.yaml
new file mode 100644
index 0000000..b0589fa
--- /dev/null
+++ b/Bindings/display/bridge/chrontel,ch7033.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chrontel CH7033 Video Encoder
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+ compatible:
+ const: chrontel,ch7033
+
+ reg:
+ maxItems: 1
+ description: I2C address of the device
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Video port for RGB input.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ DVI port, should be connected to a node compatible with the
+ dvi-connector binding.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vga-dvi-encoder@76 {
+ compatible = "chrontel,ch7033";
+ reg = <0x76>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&lcd0_rgb_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&dvi_in>;
+ };
+ };
+
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Bindings/display/bridge/fsl,imx8qxp-ldb.yaml
new file mode 100644
index 0000000..9454300
--- /dev/null
+++ b/Bindings/display/bridge/fsl,imx8qxp-ldb.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp LVDS Display Bridge
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+description: |
+ The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels.
+
+ The i.MX8qm/qxp LDB is controlled by Control and Status Registers(CSR) module.
+ The CSR module, as a system controller, contains the LDB's configuration
+ registers.
+
+ For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color
+ format and can map the input to VESA or JEIDA standards. The two channels
+ cannot be used simultaneously, that is to say, the user should pick one of
+ them to use. Two LDB channels from two LDB instances can work together in
+ LDB split mode to support a dual link LVDS display. The channel indexes
+ have to be different. Channel0 outputs odd pixels and channel1 outputs
+ even pixels.
+
+ For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel
+ input color format. The two channels can be used simultaneously, either
+ in dual mode or split mode. In dual mode, the two channels output identical
+ data. In split mode, channel0 outputs odd pixels and channel1 outputs even
+ pixels.
+
+ A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in
+ the SoC reference manuals. The pixel mapper uses logic of LDBs embedded in
+ i.MX6qdl/sx SoCs, i.e., it is essentially based on them. To keep the naming
+ consistency, this binding calls it LDB.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qm-ldb
+ - fsl,imx8qxp-ldb
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: pixel clock
+ - description: bypass clock
+
+ clock-names:
+ items:
+ - const: pixel
+ - const: bypass
+
+ power-domains:
+ maxItems: 1
+
+ fsl,companion-ldb:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ A phandle which points to companion LDB which is used in LDB split mode.
+
+patternProperties:
+ "^channel@[0-1]$":
+ type: object
+ description: Represents a channel of LDB.
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ description: The channel index.
+ enum: [ 0, 1 ]
+
+ phys:
+ description: A phandle to the phy module representing the LVDS PHY.
+ maxItems: 1
+
+ phy-names:
+ const: lvds_phy
+
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input port of the channel.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Output port of the channel.
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - reg
+ - phys
+ - phy-names
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - clocks
+ - clock-names
+ - power-domains
+ - channel@0
+ - channel@1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8qm-ldb
+ then:
+ properties:
+ fsl,companion-ldb: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ ldb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8qxp-ldb";
+ clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+ <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+ clock-names = "pixel", "bypass";
+ power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+ channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ phys = <&mipi_lvds_0_phy>;
+ phy-names = "lvds_phy";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+ remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+ };
+ };
+ };
+
+ channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ phys = <&mipi_lvds_0_phy>;
+ phy-names = "lvds_phy";
+
+ port@0 {
+ reg = <0>;
+
+ mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+ remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml b/Bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
new file mode 100644
index 0000000..50bae21
--- /dev/null
+++ b/Bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Pixel Combiner
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+description: |
+ The Freescale i.MX8qm/qxp Pixel Combiner takes two output streams from a
+ single display controller and manipulates the two streams to support a number
+ of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as
+ either one screen, two screens, or virtual screens. The pixel combiner is
+ also responsible for generating some of the control signals for the pixel link
+ output channel.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qm-pixel-combiner
+ - fsl,imx8qxp-pixel-combiner
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: apb
+
+ power-domains:
+ maxItems: 1
+
+patternProperties:
+ "^channel@[0-1]$":
+ type: object
+ description: Represents a display stream of pixel combiner.
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ description: The display stream index.
+ enum: [ 0, 1 ]
+
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input endpoint of the display stream.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Output endpoint of the display stream.
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - reg
+ - port@0
+ - port@1
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+ - reg
+ - clocks
+ - clock-names
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ pixel-combiner@56020000 {
+ compatible = "fsl,imx8qxp-pixel-combiner";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x56020000 0x10000>;
+ clocks = <&dc0_pixel_combiner_lpcg IMX_LPCG_CLK_4>;
+ clock-names = "apb";
+ power-domains = <&pd IMX_SC_R_DC_0>;
+
+ channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dc0_pixel_combiner_ch0_dc0_dpu_disp0: endpoint {
+ remote-endpoint = <&dc0_dpu_disp0_dc0_pixel_combiner_ch0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dc0_pixel_combiner_ch0_dc0_pixel_link0: endpoint {
+ remote-endpoint = <&dc0_pixel_link0_dc0_pixel_combiner_ch0>;
+ };
+ };
+ };
+
+ channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ port@0 {
+ reg = <0>;
+
+ dc0_pixel_combiner_ch1_dc0_dpu_disp1: endpoint {
+ remote-endpoint = <&dc0_dpu_disp1_dc0_pixel_combiner_ch1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dc0_pixel_combiner_ch1_dc0_pixel_link1: endpoint {
+ remote-endpoint = <&dc0_pixel_link1_dc0_pixel_combiner_ch1>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
new file mode 100644
index 0000000..38ecc79
--- /dev/null
+++ b/Bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Display Pixel Link
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+description: |
+ The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard
+ asynchronous linkage between pixel sources(display controller or
+ camera module) and pixel consumers(imaging or displays).
+ It consists of two distinct functions, a pixel transfer function and a
+ control interface. Multiple pixel channels can exist per one control channel.
+ This binding documentation is only for pixel links whose pixel sources are
+ display controllers.
+
+ The i.MX8qm/qxp Display Pixel Link is accessed via System Controller Unit(SCU)
+ firmware.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qm-dc-pixel-link
+ - fsl,imx8qxp-dc-pixel-link
+
+ fsl,dc-id:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: |
+ u8 value representing the display controller index that the pixel link
+ connects to.
+
+ fsl,dc-stream-id:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description: |
+ u8 value representing the display controller stream index that the pixel
+ link connects to.
+ enum: [0, 1]
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The pixel link input port node from upstream video source.
+
+ patternProperties:
+ "^port@[1-4]$":
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The pixel link output port node to downstream bridge.
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+ - port@3
+ - port@4
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8qxp-dc-pixel-link
+ then:
+ properties:
+ fsl,dc-id:
+ const: 0
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8qm-dc-pixel-link
+ then:
+ properties:
+ fsl,dc-id:
+ enum: [0, 1]
+
+required:
+ - compatible
+ - fsl,dc-id
+ - fsl,dc-stream-id
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ dc0-pixel-link0 {
+ compatible = "fsl,imx8qxp-dc-pixel-link";
+ fsl,dc-id = /bits/ 8 <0>;
+ fsl,dc-stream-id = /bits/ 8 <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* from dc0 pixel combiner channel0 */
+ port@0 {
+ reg = <0>;
+
+ dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint {
+ remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>;
+ };
+ };
+
+ /* to PXL2DPIs in MIPI/LVDS combo subsystems */
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>;
+ };
+
+ dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>;
+ };
+ };
+
+ /* unused */
+ port@2 {
+ reg = <2>;
+ };
+
+ /* unused */
+ port@3 {
+ reg = <3>;
+ };
+
+ /* to imaging subsystem */
+ port@4 {
+ reg = <4>;
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
new file mode 100644
index 0000000..e4e77fad
--- /dev/null
+++ b/Bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+description: |
+ The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI)
+ interfaces the pixel link 36-bit data output and the DSI controller’s
+ MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module
+ used in LVDS mode, to remap the pixel color codings between those modules.
+ This module is purely combinatorial.
+
+ The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module.
+ The CSR module, as a system controller, contains the PXL2DPI's configuration
+ register.
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-pxl2dpi
+
+ fsl,sc-resource:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The SCU resource ID associated with this PXL2DPI instance.
+
+ power-domains:
+ maxItems: 1
+
+ fsl,companion-pxl2dpi:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ A phandle which points to companion PXL2DPI which is used by downstream
+ LVDS Display Bridge(LDB) in split mode.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The PXL2DPI input port node from pixel link.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The PXL2DPI output port node to downstream bridge.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - fsl,sc-resource
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ pxl2dpi {
+ compatible = "fsl,imx8qxp-pxl2dpi";
+ fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+ power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>;
+ };
+
+ mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>;
+ };
+ };
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+ };
+
+ mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/fsl,imx93-mipi-dsi.yaml b/Bindings/display/bridge/fsl,imx93-mipi-dsi.yaml
new file mode 100644
index 0000000..d6e51d0
--- /dev/null
+++ b/Bindings/display/bridge/fsl,imx93-mipi-dsi.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx93-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX93 specific extensions to Synopsys Designware MIPI DSI
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+
+description: |
+ There is a Synopsys Designware MIPI DSI Host Controller and a Synopsys
+ Designware MIPI DPHY embedded in Freescale i.MX93 SoC. Some configurations
+ and extensions to them are controlled by i.MX93 media blk-ctrl.
+
+allOf:
+ - $ref: snps,dw-mipi-dsi.yaml#
+
+properties:
+ compatible:
+ const: fsl,imx93-mipi-dsi
+
+ clocks:
+ items:
+ - description: apb clock
+ - description: pixel clock
+ - description: PHY configuration clock
+ - description: PHY reference clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: pix
+ - const: phy_cfg
+ - const: phy_ref
+
+ interrupts:
+ maxItems: 1
+
+ fsl,media-blk-ctrl:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ i.MX93 media blk-ctrl, as a syscon, controls pixel component bit map
+ configurations from LCDIF display controller to the MIPI DSI host
+ controller and MIPI DPHY PLL related configurations through PLL SoC
+ interface.
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - interrupts
+ - fsl,media-blk-ctrl
+ - power-domains
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx93-clock.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/fsl,imx93-power.h>
+
+ dsi@4ae10000 {
+ compatible = "fsl,imx93-mipi-dsi";
+ reg = <0x4ae10000 0x10000>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX93_CLK_MIPI_DSI_GATE>,
+ <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+ <&clk IMX93_CLK_MIPI_PHY_CFG>,
+ <&clk IMX93_CLK_24M>;
+ clock-names = "pclk", "pix", "phy_cfg", "phy_ref";
+ fsl,media-blk-ctrl = <&media_blk_ctrl>;
+ power-domains = <&media_blk_ctrl IMX93_MEDIABLK_PD_MIPI_DSI>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "raydium,rm67191";
+ reg = <0>;
+ reset-gpios = <&adp5585gpio 6 GPIO_ACTIVE_LOW>;
+ dsi-lanes = <4>;
+ video-mode = <2>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dsi_to_lcdif: endpoint {
+ remote-endpoint = <&lcdif_to_dsi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/fsl,ldb.yaml b/Bindings/display/bridge/fsl,ldb.yaml
new file mode 100644
index 0000000..07388bf
--- /dev/null
+++ b/Bindings/display/bridge/fsl,ldb.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DPI to LVDS bridge chip
+
+maintainers:
+ - Marek Vasut <marex@denx.de>
+
+description: |
+ The i.MX8MP mediamix contains two registers which are responsible
+ for configuring the on-SoC DPI-to-LVDS serializer. This describes
+ those registers as bridge within the DT.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6sx-ldb
+ - fsl,imx8mp-ldb
+ - fsl,imx93-ldb
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ldb
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: ldb
+ - const: lvds
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for DPI input.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for LVDS Channel-A output (panel or bridge).
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for LVDS Channel-B output (panel or bridge).
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - clocks
+ - ports
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6sx-ldb
+ - fsl,imx93-ldb
+ then:
+ properties:
+ ports:
+ properties:
+ port@2: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mp-clock.h>
+
+ blk-ctrl {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bridge@5c {
+ compatible = "fsl,imx8mp-ldb";
+ clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+ clock-names = "ldb";
+ reg = <0x5c 0x4>, <0x128 0x4>;
+ reg-names = "ldb", "lvds";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ ldb_from_lcdif2: endpoint {
+ remote-endpoint = <&lcdif2_to_ldb>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ldb_lvds_ch0: endpoint {
+ remote-endpoint = <&ldb_to_lvdsx4panel>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ldb_lvds_ch1: endpoint {
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/google,cros-ec-anx7688.yaml b/Bindings/display/bridge/google,cros-ec-anx7688.yaml
new file mode 100644
index 0000000..a44d025
--- /dev/null
+++ b/Bindings/display/bridge/google,cros-ec-anx7688.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/google,cros-ec-anx7688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port
+
+maintainers:
+ - Nicolas Boichat <drinkcat@chromium.org>
+
+description: |
+ ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to
+ DisplayPort 1.3 Ultra-HDi (4096x2160p60). It is an Analogix ANX7688 chip
+ which is connected to and operated by the ChromeOS Embedded Controller
+ (See google,cros-ec.yaml). It is accessed using I2C tunneling through
+ the EC and therefore its node should be a child of an EC I2C tunnel node
+ (See google,cros-ec-i2c-tunnel.yaml).
+
+properties:
+ compatible:
+ const: google,cros-ec-anx7688
+
+ reg:
+ maxItems: 1
+ description: I2C address of the device.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for HDMI input.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: USB Type-c connector.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c_tunnel_b: i2c-tunnel1 {
+ compatible = "google,cros-ec-i2c-tunnel";
+ google,remote-bus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ anx7688: anx7688@2c {
+ compatible = "google,cros-ec-anx7688";
+ reg = <0x2c>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ anx7688_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ anx7688_out: endpoint {
+ remote-endpoint = <&typec_connector>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Bindings/display/bridge/ingenic,jz4780-hdmi.yaml
new file mode 100644
index 0000000..0b27df4
--- /dev/null
+++ b/Bindings/display/bridge/ingenic,jz4780-hdmi.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ4780 HDMI Transmitter
+
+maintainers:
+ - H. Nikolaus Schaller <hns@goldelico.com>
+
+description: |
+ The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4
+ TX controller IP with accompanying PHY IP.
+
+allOf:
+ - $ref: synopsys,dw-hdmi.yaml#
+
+properties:
+ compatible:
+ const: ingenic,jz4780-dw-hdmi
+
+ reg-io-width:
+ const: 4
+
+ clocks:
+ maxItems: 2
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input from LCD controller output.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Link to the HDMI connector.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - ports
+ - reg-io-width
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+ hdmi: hdmi@10180000 {
+ compatible = "ingenic,jz4780-dw-hdmi";
+ reg = <0x10180000 0x8000>;
+ reg-io-width = <4>;
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+ clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in: port@0 {
+ reg = <0>;
+ dw_hdmi_in: endpoint {
+ remote-endpoint = <&jz4780_lcd_out>;
+ };
+ };
+ hdmi_out: port@1 {
+ reg = <1>;
+ dw_hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/intel,keembay-dsi.yaml b/Bindings/display/bridge/intel,keembay-dsi.yaml
new file mode 100644
index 0000000..958a073
--- /dev/null
+++ b/Bindings/display/bridge/intel,keembay-dsi.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay mipi dsi controller
+
+maintainers:
+ - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
+ - Edmond J Dea <edmund.j.dea@intel.com>
+
+properties:
+ compatible:
+ const: intel,keembay-dsi
+
+ reg:
+ items:
+ - description: MIPI registers range
+
+ reg-names:
+ items:
+ - const: mipi
+
+ clocks:
+ items:
+ - description: MIPI DSI clock
+ - description: MIPI DSI econfig clock
+ - description: MIPI DSI config clock
+
+ clock-names:
+ items:
+ - const: clk_mipi
+ - const: clk_mipi_ecfg
+ - const: clk_mipi_cfg
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: MIPI DSI input port.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI output port.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ mipi-dsi@20900000 {
+ compatible = "intel,keembay-dsi";
+ reg = <0x20900000 0x4000>;
+ reg-names = "mipi";
+ clocks = <&scmi_clk 0x86>,
+ <&scmi_clk 0x88>,
+ <&scmi_clk 0x89>;
+ clock-names = "clk_mipi", "clk_mipi_ecfg",
+ "clk_mipi_cfg";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&disp_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&adv7535_input>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/ite,it6505.yaml b/Bindings/display/bridge/ite,it6505.yaml
new file mode 100644
index 0000000..c9a882e
--- /dev/null
+++ b/Bindings/display/bridge/ite,it6505.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it6505.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE it6505
+
+maintainers:
+ - Allen Chen <allen.chen@ite.com.tw>
+
+description: |
+ The IT6505 is a high-performance DisplayPort 1.1a transmitter,
+ fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications.
+ The IT6505 supports color depth of up to 36 bits (12 bits/color)
+ and ensures robust transmission of high-quality uncompressed video
+ content, along with uncompressed and compressed digital audio content.
+
+ Aside from the various video output formats supported, the IT6505
+ also encodes and transmits up to 8 channels of I2S digital audio,
+ with sampling rate up to 192kHz and sample size up to 24 bits.
+ In addition, an S/PDIF input port takes in compressed audio of up to
+ 192kHz frame rate.
+
+ Each IT6505 chip comes preprogrammed with an unique HDCP key,
+ in compliance with the HDCP 1.3 standard so as to provide secure
+ transmission of high-definition content. Users of the IT6505 need not
+ purchase any HDCP keys or ROMs.
+
+properties:
+ compatible:
+ const: ite,it6505
+
+ reg:
+ maxItems: 1
+
+ ovdd-supply:
+ description: I/O voltage
+
+ pwr18-supply:
+ description: core voltage
+
+ interrupts:
+ maxItems: 1
+ description: interrupt specifier of INT pin
+
+ reset-gpios:
+ maxItems: 1
+ description: gpio specifier of RESET pin
+
+ extcon:
+ maxItems: 1
+ description: extcon specifier for the Power Delivery
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: A port node pointing to DPI host port node
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ link-frequencies:
+ minItems: 1
+ maxItems: 1
+ description: Allowed max link frequencies in Hz
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Video port for DP output
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ uniqueItems: true
+ items:
+ - enum: [ 0, 1 ]
+ - const: 1
+ - const: 2
+ - const: 3
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - ovdd-supply
+ - pwr18-supply
+ - interrupts
+ - reset-gpios
+ - extcon
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp-bridge@5c {
+ compatible = "ite,it6505";
+ interrupts = <152 IRQ_TYPE_EDGE_FALLING 152 0>;
+ reg = <0x5c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&it6505_pins>;
+ ovdd-supply = <&mt6358_vsim1_reg>;
+ pwr18-supply = <&it6505_pp18_reg>;
+ reset-gpios = <&pio 179 1>;
+ extcon = <&usbc_extcon>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ it6505_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ link-frequencies = /bits/ 64 <150000000>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ it6505_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ data-lanes = <0 1>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/ite,it66121.yaml b/Bindings/display/bridge/ite,it66121.yaml
new file mode 100644
index 0000000..a7eb260
--- /dev/null
+++ b/Bindings/display/bridge/ite,it66121.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE it66121 HDMI bridge
+
+maintainers:
+ - Phong LE <ple@baylibre.com>
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+ The IT66121 is a high-performance and low-power single channel HDMI
+ transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible
+ to DVI 1.0 specifications.
+
+properties:
+ compatible:
+ enum:
+ - ite,it66121
+ - ite,it6610
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active low reset
+
+ vrf12-supply:
+ description: Regulator for 1.2V analog core power.
+
+ vcn33-supply:
+ description: Regulator for 3.3V digital core power.
+
+ vcn18-supply:
+ description: Regulator for 1.8V IO core power.
+
+ interrupts:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: DPI input port.
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ bus-width:
+ description:
+ Endpoint bus width.
+ enum:
+ - 12 # 12 data lines connected and dual-edge mode
+ - 24 # 24 data lines connected and single-edge mode
+ default: 24
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: HDMI Connector port.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - vrf12-supply
+ - vcn33-supply
+ - vcn18-supply
+ - interrupts
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ it66121hdmitx: hdmitx@4c {
+ compatible = "ite,it66121";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ite_pins_default>;
+ vcn33-supply = <&mt6358_vcn33_wifi_reg>;
+ vcn18-supply = <&mt6358_vcn18_reg>;
+ vrf12-supply = <&mt6358_vrf12_reg>;
+ reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&pio>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x4c>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ it66121_in: endpoint {
+ bus-width = <12>;
+ remote-endpoint = <&display_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi_conn_out: endpoint {
+ remote-endpoint = <&hdmi_conn_in>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/lontium,lt8912b.yaml b/Bindings/display/bridge/lontium,lt8912b.yaml
new file mode 100644
index 0000000..f201ae4
--- /dev/null
+++ b/Bindings/display/bridge/lontium,lt8912b.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT8912B MIPI to HDMI Bridge
+
+maintainers:
+ - Adrien Grassein <adrien.grassein@gmail.com>
+
+description: |
+ The LT8912B is a bridge device which convert DSI to HDMI
+
+properties:
+ compatible:
+ enum:
+ - lontium,lt8912b
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active high RESET pin.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Primary MIPI port for MIPI input
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes: true
+
+ required:
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ HDMI port, should be connected to a node compatible with the
+ hdmi-connector binding.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi-bridge@48 {
+ compatible = "lontium,lt8912b";
+ reg = <0x48>;
+ reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_out_in: endpoint {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/lontium,lt9211.yaml b/Bindings/display/bridge/lontium,lt9211.yaml
new file mode 100644
index 0000000..9a6e9b2
--- /dev/null
+++ b/Bindings/display/bridge/lontium,lt9211.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge.
+
+maintainers:
+ - Marek Vasut <marex@denx.de>
+
+description: |
+ The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS
+ or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI.
+
+properties:
+ compatible:
+ enum:
+ - lontium,lt9211
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active high RESET pin.
+
+ vccio-supply:
+ description: Regulator for 1.8V IO power.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Primary MIPI DSI port-1 for MIPI input or
+ LVDS port-1 for LVDS input or DPI input.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Additional MIPI port-2 for MIPI input or LVDS port-2
+ for LVDS input. Used in combination with primary
+ port-1 to drive higher resolution displays
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Primary MIPI DSI port-1 for MIPI output or
+ LVDS port-1 for LVDS output or DPI output.
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Additional MIPI port-2 for MIPI output or LVDS port-2
+ for LVDS output. Used in combination with primary
+ port-1 to drive higher resolution displays.
+
+ required:
+ - port@0
+ - port@2
+
+required:
+ - compatible
+ - reg
+ - vccio-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi-bridge@3b {
+ compatible = "lontium,lt9211";
+ reg = <0x3b>;
+
+ reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+ interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+ vccio-supply = <<9211_1v8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/lontium,lt9611.yaml b/Bindings/display/bridge/lontium,lt9611.yaml
new file mode 100644
index 0000000..5b9d36f
--- /dev/null
+++ b/Bindings/display/bridge/lontium,lt9611.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+description: |
+ The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI
+
+properties:
+ compatible:
+ enum:
+ - lontium,lt9611
+ - lontium,lt9611uxc
+
+ reg:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active high RESET pin.
+
+ vdd-supply:
+ description: Regulator for 1.8V MIPI phy power.
+
+ vcc-supply:
+ description: Regulator for 3.3V IO power.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Primary MIPI port-1 for MIPI input
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Additional MIPI port-2 for MIPI input, used in combination
+ with primary MIPI port-1 to drive higher resolution displays
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ HDMI port for HDMI output
+
+ required:
+ - port@0
+ - port@2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - vdd-supply
+ - vcc-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c10 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi-bridge@3b {
+ compatible = "lontium,lt9611";
+ reg = <0x3b>;
+
+ reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+ interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <<9611_1v8>;
+ vcc-supply = <<9611_3v3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lt9611_a: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lt9611_b: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ lt9611_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/lvds-codec.yaml b/Bindings/display/bridge/lvds-codec.yaml
new file mode 100644
index 0000000..84aafcb
--- /dev/null
+++ b/Bindings/display/bridge/lvds-codec.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lvds-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Transparent LVDS encoders and decoders
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+ This binding supports transparent LVDS encoders and decoders that don't
+ require any configuration.
+
+ LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
+ incompatible data link layers have been used over time to transmit image data
+ to LVDS panels. This binding targets devices compatible with the following
+ specifications only.
+
+ [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
+ 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
+ [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
+ Semiconductor
+ [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
+ Electronics Standards Association (VESA)
+
+ Those devices have been marketed under the FPD-Link and FlatLink brand names
+ among others.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ti,ds90c185 # For the TI DS90C185 FPD-Link Serializer
+ - ti,ds90c187 # For the TI DS90C187 FPD-Link Serializer
+ - ti,sn75lvds83 # For the TI SN75LVDS83 FlatLink transmitter
+ - const: lvds-encoder # Generic LVDS encoder compatible fallback
+ - items:
+ - enum:
+ - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver
+ - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+ - const: lvds-decoder # Generic LVDS decoders compatible fallback
+ - enum:
+ - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: |
+ For LVDS encoders, port 0 is the parallel input
+ For LVDS decoders, port 0 is the LVDS input
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-mapping:
+ enum:
+ - jeida-18
+ - jeida-24
+ - vesa-24
+ description: |
+ The color signals mapping order. See details in
+ Documentation/devicetree/bindings/display/lvds.yaml
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ For LVDS encoders, port 1 is the LVDS output
+ For LVDS decoders, port 1 is the parallel output
+
+ required:
+ - port@0
+ - port@1
+
+ pclk-sample:
+ description:
+ Data sampling on rising or falling edge.
+ enum:
+ - 0 # Falling edge
+ - 1 # Rising edge
+ default: 0
+
+ powerdown-gpios:
+ description:
+ The GPIO used to control the power down line of this device.
+ maxItems: 1
+
+ power-supply: true
+
+allOf:
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: lvds-decoder
+ then:
+ properties:
+ ports:
+ properties:
+ port@0:
+ properties:
+ endpoint:
+ properties:
+ data-mapping: false
+
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: lvds-encoder
+ then:
+ properties:
+ pclk-sample: false
+
+required:
+ - compatible
+ - ports
+
+additionalProperties: false
+
+
+examples:
+ - |
+ lvds-encoder {
+ compatible = "ti,ds90c185", "lvds-encoder";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_enc_in: endpoint {
+ remote-endpoint = <&display_out_rgb>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds_enc_out: endpoint {
+ remote-endpoint = <&lvds_panel_in>;
+ };
+ };
+ };
+ };
+
+ - |
+ lvds-decoder {
+ compatible = "ti,ds90cf384a", "lvds-decoder";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_dec_in: endpoint {
+ remote-endpoint = <&display_out_lvds>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds_dec_out: endpoint {
+ remote-endpoint = <&rgb_panel_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
new file mode 100644
index 0000000..09e0a21
--- /dev/null
+++ b/Bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
@@ -0,0 +1,91 @@
+Drivers for the second video output of the GE B850v3:
+ STDP4028-ge-b850v3-fw bridges (LVDS-DP)
+ STDP2690-ge-b850v3-fw bridges (DP-DP++)
+
+The video processing pipeline on the second output on the GE B850v3:
+
+ Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
+
+Each bridge has a dedicated flash containing firmware for supporting the custom
+design. The result is that, in this design, neither the STDP4028 nor the
+STDP2690 behave as the stock bridges would. The compatible strings include the
+suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
+the firmware specific for the GE B850v3.
+
+The hardware do not provide control over the video processing pipeline, as the
+two bridges behaves as a single one. The only interfaces exposed by the
+hardware are EDID, HPD, and interrupts.
+
+stdp4028-ge-b850v3-fw required properties:
+ - compatible : "megachips,stdp4028-ge-b850v3-fw"
+ - reg : I2C bus address
+ - interrupts : one interrupt should be described here, as in
+ <0 IRQ_TYPE_LEVEL_HIGH>
+ - ports : One input port(reg = <0>) and one output port(reg = <1>)
+
+stdp2690-ge-b850v3-fw required properties:
+ compatible : "megachips,stdp2690-ge-b850v3-fw"
+ - reg : I2C bus address
+ - ports : One input port(reg = <0>) and one output port(reg = <1>)
+
+Example:
+
+&mux2_i2c2 {
+ clock-frequency = <100000>;
+
+ stdp4028@73 {
+ compatible = "megachips,stdp4028-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x73>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ stdp4028_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ stdp4028_out: endpoint {
+ remote-endpoint = <&stdp2690_in>;
+ };
+ };
+ };
+ };
+
+ stdp2690@72 {
+ compatible = "megachips,stdp2690-ge-b850v3-fw";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x72>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ stdp2690_in: endpoint {
+ remote-endpoint = <&stdp4028_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ stdp2690_out: endpoint {
+ /* Connector for external display */
+ };
+ };
+ };
+ };
+};
diff --git a/Bindings/display/bridge/nwl-dsi.yaml b/Bindings/display/bridge/nwl-dsi.yaml
new file mode 100644
index 0000000..350fb8f
--- /dev/null
+++ b/Bindings/display/bridge/nwl-dsi.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Northwest Logic MIPI-DSI controller on i.MX SoCs
+
+maintainers:
+ - Guido Gúnther <agx@sigxcpu.org>
+ - Robert Chiras <robert.chiras@nxp.com>
+
+description: |
+ NWL MIPI-DSI host controller found on i.MX8 platforms. This is a dsi bridge for
+ the SOCs NWL MIPI-DSI host controller.
+
+allOf:
+ - $ref: ../dsi-controller.yaml#
+
+properties:
+ compatible:
+ const: fsl,imx8mq-nwl-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ assigned-clock-parents: true
+ assigned-clock-rates: true
+ assigned-clocks: true
+
+ clocks:
+ items:
+ - description: DSI core clock
+ - description: RX_ESC clock (used in escape mode)
+ - description: TX_ESC clock (used in escape mode)
+ - description: PHY_REF clock
+ - description: LCDIF clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: rx_esc
+ - const: tx_esc
+ - const: phy_ref
+ - const: lcdif
+
+ mux-controls:
+ description:
+ mux controller node to use for operating the input mux
+
+ phys:
+ maxItems: 1
+ description:
+ A phandle to the phy module representing the DPHY
+
+ phy-names:
+ items:
+ - const: dphy
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: dsi byte reset line
+ - description: dsi dpi reset line
+ - description: dsi esc reset line
+ - description: dsi pclk reset line
+
+ reset-names:
+ items:
+ - const: byte
+ - const: dpi
+ - const: esc
+ - const: pclk
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description:
+ Input port node to receive pixel data from the
+ display controller. Exactly one endpoint must be
+ specified.
+ properties:
+ endpoint@0:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: sub-node describing the input from LCDIF
+
+ endpoint@1:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ description: sub-node describing the input from DCSS
+
+ oneOf:
+ - required:
+ - endpoint@0
+ - required:
+ - endpoint@1
+
+ unevaluatedProperties: false
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ DSI output port node to the panel or the next bridge
+ in the chain
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - '#address-cells'
+ - '#size-cells'
+ - clock-names
+ - clocks
+ - compatible
+ - interrupts
+ - mux-controls
+ - phy-names
+ - phys
+ - ports
+ - reg
+ - reset-names
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mq-clock.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/imx8mq-reset.h>
+
+ dsi@30a00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8mq-nwl-dsi";
+ reg = <0x30A00000 0x300>;
+ clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
+ <&clk IMX8MQ_CLK_DSI_AHB>,
+ <&clk IMX8MQ_CLK_DSI_IPG_DIV>,
+ <&clk IMX8MQ_CLK_DSI_PHY_REF>,
+ <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+ clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ mux-controls = <&mux 0>;
+ power-domains = <&pgc_mipi>;
+ resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
+ <&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
+ <&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
+ <&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
+ reset-names = "byte", "dpi", "esc", "pclk";
+ phys = <&dphy>;
+ phy-names = "dphy";
+
+ panel@0 {
+ compatible = "rocktech,jh057n00900";
+ reg = <0>;
+ vcc-supply = <®_2v8_p>;
+ iovcc-supply = <®_1v8_p>;
+ reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mipi_dsi_out>;
+ };
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0>;
+ mipi_dsi_in: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&lcdif_mipi_dsi>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ mipi_dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/nxp,ptn3460.yaml b/Bindings/display/bridge/nxp,ptn3460.yaml
new file mode 100644
index 0000000..70ec709
--- /dev/null
+++ b/Bindings/display/bridge/nxp,ptn3460.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3460 eDP to LVDS bridge
+
+maintainers:
+ - Sean Paul <seanpaul@chromium.org>
+
+properties:
+ compatible:
+ const: nxp,ptn3460
+
+ reg:
+ description: I2C address of the bridge
+ maxItems: 1
+
+ edid-emulation:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The EDID emulation entry to use
+ Value Resolution Description
+ 0 1024x768 NXP Generic
+ 1 1920x1080 NXP Generic
+ 2 1920x1080 NXP Generic
+ 3 1600x900 Samsung LTM200KT
+ 4 1920x1080 Samsung LTM230HT
+ 5 1366x768 NXP Generic
+ 6 1600x900 ChiMei M215HGE
+ enum: [0, 1, 2, 3, 4, 5, 6]
+
+ powerdown-gpios:
+ description: GPIO connected to the PD_N signal.
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO connected to the RST_N signal.
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for LVDS output
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for eDP input
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - edid-emulation
+ - powerdown-gpios
+ - reset-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@20 {
+ compatible = "nxp,ptn3460";
+ reg = <0x20>;
+ edid-emulation = <5>;
+ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ bridge_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/nxp,tda998x.yaml b/Bindings/display/bridge/nxp,tda998x.yaml
new file mode 100644
index 0000000..21d995f2
--- /dev/null
+++ b/Bindings/display/bridge/nxp,tda998x.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,tda998x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TDA998x HDMI transmitter
+
+maintainers:
+ - Russell King <linux@armlinux.org.uk>
+
+properties:
+ compatible:
+ const: nxp,tda998x
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ video-ports:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0x230145
+ maximum: 0xffffff
+ description:
+ 24 bits value which defines how the video controller output is wired to
+ the TDA998x input.
+
+ audio-ports:
+ description:
+ Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst).
+ The implementation allows one or two DAIs.
+ If two DAIs are defined, they must be of different type.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ minItems: 1
+ items:
+ - description: |
+ The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S
+ (see include/dt-bindings/display/tda998x.h).
+ - description:
+ The second value defines the tda998x AP_ENA reg content when the
+ DAI in question is used.
+
+ '#sound-dai-cells':
+ enum: [ 0, 1 ]
+
+ nxp,calib-gpios:
+ maxItems: 1
+ description:
+ Calibration GPIO, which must correspond with the gpio used for the
+ TDA998x interrupt pin.
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Parallel input port
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ type: object
+ description: Parallel input port
+
+ port@1:
+ type: object
+ description: HDMI output port
+
+required:
+ - compatible
+ - reg
+
+oneOf:
+ - required:
+ - port
+ - required:
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/display/tda998x.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tda998x: hdmi-encoder@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ video-ports = <0x230145>;
+
+ #sound-dai-cells = <1>;
+ /* DAI-format / AP_ENA reg value */
+ audio-ports = <TDA998x_SPDIF 0x04>,
+ <TDA998x_I2S 0x03>;
+
+ port {
+ tda998x_in: endpoint {
+ remote-endpoint = <&lcdc_0>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/parade,ps8622.yaml b/Bindings/display/bridge/parade,ps8622.yaml
new file mode 100644
index 0000000..e6397ac
--- /dev/null
+++ b/Bindings/display/bridge/parade,ps8622.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/parade,ps8622.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parade PS8622/PS8625 DisplayPort to LVDS Converter
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+ compatible:
+ enum:
+ - parade,ps8622
+ - parade,ps8625
+
+ reg:
+ maxItems: 1
+
+ lane-count:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2]
+ description: Number of DP lanes to use.
+
+ use-external-pwm:
+ type: boolean
+ description: Backlight will be controlled by an external PWM.
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to RST_ pin.
+
+ sleep-gpios:
+ maxItems: 1
+ description: GPIO connected to PD_ pin.
+
+ vdd12-supply: true
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for LVDS output.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for DisplayPort input.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - sleep-gpios
+ - ports
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ const: parade,ps8622
+ then:
+ properties:
+ lane-count:
+ const: 1
+ else:
+ properties:
+ lane-count:
+ const: 2
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lvds-bridge@48 {
+ compatible = "parade,ps8625";
+ reg = <0x48>;
+ sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
+ lane-count = <2>;
+ use-external-pwm;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ bridge_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/ps8640.yaml b/Bindings/display/bridge/ps8640.yaml
new file mode 100644
index 0000000..5856450
--- /dev/null
+++ b/Bindings/display/bridge/ps8640.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ps8640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DSI to eDP Video Format Converter
+
+maintainers:
+ - Nicolas Boichat <drinkcat@chromium.org>
+
+description: |
+ The PS8640 is a low power MIPI-to-eDP video format converter supporting
+ mobile devices with embedded panel resolutions up to 2048 x 1536. The
+ device accepts a single channel of MIPI DSI v1.1, with up to four lanes
+ plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The
+ device outputs eDP v1.4, one or two lanes, at a link rate of up to
+ 3.24Gbit/sec per lane.
+
+properties:
+ compatible:
+ const: parade,ps8640
+
+ reg:
+ maxItems: 1
+ description: Base I2C address of the device.
+
+ powerdown-gpios:
+ maxItems: 1
+ description: GPIO connected to active low powerdown.
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active low reset.
+
+ vdd12-supply:
+ description: Regulator for 1.2V digital core power.
+
+ vdd33-supply:
+ description: Regulator for 3.3V digital core power.
+
+ aux-bus:
+ $ref: /schemas/display/dp-aux-bus.yaml#
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for DSI input
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for eDP output (panel or connector).
+
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - powerdown-gpios
+ - reset-gpios
+ - vdd12-supply
+ - vdd33-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ps8640: edp-bridge@18 {
+ compatible = "parade,ps8640";
+ reg = <0x18>;
+ powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
+ vdd12-supply = <&ps8640_fixed_1v2>;
+ vdd33-supply = <&mt6397_vgp2_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ps8640_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ ps8640_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel {
+ compatible = "boe,nv133fhm-n62";
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&ps8640_out>;
+ };
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Bindings/display/bridge/renesas,dsi-csi2-tx.yaml
new file mode 100644
index 0000000..d33026f
--- /dev/null
+++ b/Bindings/display/bridge/renesas,dsi-csi2-tx.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car MIPI DSI/CSI-2 Encoder
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+ This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
+ R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up
+ to four data lanes.
+
+properties:
+ compatible:
+ enum:
+ - renesas,r8a779a0-dsi-csi2-tx # for V3U
+ - renesas,r8a779g0-dsi-csi2-tx # for V4H
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Functional clock
+ - description: DSI (and CSI-2) functional clock
+ - description: PLL reference clock
+
+ clock-names:
+ items:
+ - const: fck
+ - const: dsi
+ - const: pll
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Parallel input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: DSI/CSI-2 output port
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - data-lanes
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+ - resets
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+ #include <dt-bindings/power/r8a779a0-sysc.h>
+
+ dsi0: dsi-encoder@fed80000 {
+ compatible = "renesas,r8a779a0-dsi-csi2-tx";
+ reg = <0xfed80000 0x10000>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ clocks = <&cpg CPG_MOD 415>,
+ <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+ <&cpg CPG_CORE R8A779A0_CLK_CP>;
+ clock-names = "fck", "dsi", "pll";
+ resets = <&cpg 415>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&du_out_dsi0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ data-lanes = <1 2>;
+ remote-endpoint = <&sn65dsi86_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/bridge/renesas,dsi.yaml b/Bindings/display/bridge/renesas,dsi.yaml
new file mode 100644
index 0000000..e08c246
--- /dev/null
+++ b/Bindings/display/bridge/renesas,dsi.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L MIPI DSI Encoder
+
+maintainers:
+ - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+ This binding describes the MIPI DSI encoder embedded in the Renesas
+ RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with
+ up to four data lanes.
+
+allOf:
+ - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC}
+ - renesas,r9a07g054-mipi-dsi # RZ/V2L
+ - const: renesas,rzg2l-mipi-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: Sequence operation channel 0 interrupt
+ - description: Sequence operation channel 1 interrupt
+ - description: Video-Input operation channel 1 interrupt
+ - description: DSI Packet Receive interrupt
+ - description: DSI Fatal Error interrupt
+ - description: DSI D-PHY PPI interrupt
+ - description: Debug interrupt
+
+ interrupt-names:
+ items:
+ - const: seq0
+ - const: seq1
+ - const: vin1
+ - const: rcv
+ - const: ferr
+ - const: ppi
+ - const: debug
+
+ clocks:
+ items:
+ - description: DSI D-PHY PLL multiplied clock
+ - description: DSI D-PHY system clock
+ - description: DSI AXI bus clock
+ - description: DSI Register access clock
+ - description: DSI Video clock
+ - description: DSI D-PHY Escape mode transmit clock
+
+ clock-names:
+ items:
+ - const: pllclk
+ - const: sysclk
+ - const: aclk
+ - const: pclk
+ - const: vclk
+ - const: lpclk
+
+ resets:
+ items:
+ - description: MIPI_DSI_CMN_RSTB
+ - description: MIPI_DSI_ARESET_N
+ - description: MIPI_DSI_PRESET_N
+
+ reset-names:
+ items:
+ - const: rst
+ - const: arst
+ - const: prst
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Parallel input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: DSI output port
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description: array of physical DSI data lane indexes.
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ required:
+ - data-lanes
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ dsi0: dsi@10850000 {
+ compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+ reg = <0x10850000 0x20000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "seq0", "seq1", "vin1", "rcv",
+ "ferr", "ppi", "debug";
+ clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+ <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+ clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+ resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+ <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+ <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+ reset-names = "rst", "arst", "prst";
+ power-domains = <&cpg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&du_out_dsi0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&adv7535_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/bridge/renesas,dw-hdmi.yaml b/Bindings/display/bridge/renesas,dw-hdmi.yaml
new file mode 100644
index 0000000..e3ec697
--- /dev/null
+++ b/Bindings/display/bridge/renesas,dw-hdmi.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car DWC HDMI TX Encoder
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+ The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+ with a companion PHY IP.
+
+allOf:
+ - $ref: synopsys,dw-hdmi.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a774a1-hdmi # for RZ/G2M compatible HDMI TX
+ - renesas,r8a774b1-hdmi # for RZ/G2N compatible HDMI TX
+ - renesas,r8a774e1-hdmi # for RZ/G2H compatible HDMI TX
+ - renesas,r8a7795-hdmi # for R-Car H3 compatible HDMI TX
+ - renesas,r8a7796-hdmi # for R-Car M3-W compatible HDMI TX
+ - renesas,r8a77961-hdmi # for R-Car M3-W+ compatible HDMI TX
+ - renesas,r8a77965-hdmi # for R-Car M3-N compatible HDMI TX
+ - const: renesas,rcar-gen3-hdmi
+
+ reg-io-width:
+ const: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ maxItems: 2
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Parallel RGB input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: HDMI output port
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Sound input port
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - interrupts
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+
+ hdmi@fead0000 {
+ compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
+ reg = <0xfead0000 0x10000>;
+ interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 729>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint = <&du_out_hdmi0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ rcar_dw_hdmi0_sound_in: endpoint {
+ remote-endpoint = <&hdmi_sound_out>;
+ };
+ };
+ };
+ };
+
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ label = "HDMI0 OUT";
+ type = "a";
+
+ port {
+ hdmi0_con: endpoint {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/renesas,lvds.yaml b/Bindings/display/bridge/renesas,lvds.yaml
new file mode 100644
index 0000000..bb9dbfb
--- /dev/null
+++ b/Bindings/display/bridge/renesas,lvds.yaml
@@ -0,0 +1,235 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car LVDS Encoder
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+ These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
+ Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs.
+
+properties:
+ compatible:
+ enum:
+ - renesas,r8a7742-lvds # for RZ/G1H compatible LVDS encoders
+ - renesas,r8a7743-lvds # for RZ/G1M compatible LVDS encoders
+ - renesas,r8a7744-lvds # for RZ/G1N compatible LVDS encoders
+ - renesas,r8a774a1-lvds # for RZ/G2M compatible LVDS encoders
+ - renesas,r8a774b1-lvds # for RZ/G2N compatible LVDS encoders
+ - renesas,r8a774c0-lvds # for RZ/G2E compatible LVDS encoders
+ - renesas,r8a774e1-lvds # for RZ/G2H compatible LVDS encoders
+ - renesas,r8a7790-lvds # for R-Car H2 compatible LVDS encoders
+ - renesas,r8a7791-lvds # for R-Car M2-W compatible LVDS encoders
+ - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders
+ - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders
+ - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders
+ - renesas,r8a77961-lvds # for R-Car M3-W+ compatible LVDS encoders
+ - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders
+ - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders
+ - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders
+ - renesas,r8a77990-lvds # for R-Car E3 compatible LVDS encoders
+ - renesas,r8a77995-lvds # for R-Car D3 compatible LVDS encoders
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ minItems: 1
+ maxItems: 4
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Parallel RGB input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: LVDS output port
+
+ required:
+ - port@0
+ - port@1
+
+ power-domains:
+ maxItems: 1
+
+ renesas,companion:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the companion LVDS encoder. This property is mandatory
+ for the first LVDS encoder on R-Car D3 and E3, and RZ/G2E SoCs, and shall
+ point to the second encoder to be used as a companion in dual-link mode.
+ It shall not be set for any other LVDS encoder.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - power-domains
+ - resets
+ - ports
+
+if:
+ properties:
+ compatible:
+ enum:
+ - renesas,r8a774c0-lvds
+ - renesas,r8a77990-lvds
+ - renesas,r8a77995-lvds
+then:
+ properties:
+ clocks:
+ minItems: 1
+ items:
+ - description: Functional clock
+ - description: EXTAL input clock
+ - description: DU_DOTCLKIN0 input clock
+ - description: DU_DOTCLKIN1 input clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: fck
+ # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
+ # These clocks are optional.
+ - enum:
+ - extal
+ - dclkin.0
+ - dclkin.1
+ - enum:
+ - extal
+ - dclkin.0
+ - dclkin.1
+ - enum:
+ - extal
+ - dclkin.0
+ - dclkin.1
+
+ required:
+ - clock-names
+
+else:
+ properties:
+ clocks:
+ items:
+ - description: Functional clock
+
+ clock-names:
+ items:
+ - const: fck
+
+ renesas,companion: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/renesas-cpg-mssr.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+
+ lvds@feb90000 {
+ compatible = "renesas,r8a7795-lvds";
+ reg = <0xfeb90000 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/clock/renesas-cpg-mssr.h>
+ #include <dt-bindings/power/r8a77990-sysc.h>
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a77990-lvds";
+ reg = <0xfeb90000 0x20>;
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+
+ renesas,companion = <&lvds1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in1>;
+ };
+ };
+ };
+ };
+
+ lvds1: lvds@feb90100 {
+ compatible = "renesas,r8a77990-lvds";
+ reg = <0xfeb90100 0x20>;
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds1_in: endpoint {
+ remote-endpoint = <&du_out_lvds1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in2>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/samsung,mipi-dsim.yaml b/Bindings/display/bridge/samsung,mipi-dsim.yaml
new file mode 100644
index 0000000..4ed7a79
--- /dev/null
+++ b/Bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/samsung,mipi-dsim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung MIPI DSIM bridge controller
+
+maintainers:
+ - Inki Dae <inki.dae@samsung.com>
+ - Jagan Teki <jagan@amarulasolutions.com>
+ - Marek Szyprowski <m.szyprowski@samsung.com>
+
+description: |
+ Samsung MIPI DSIM bridge controller can be found it on Exynos
+ and i.MX8M Mini/Nano/Plus SoC's.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - samsung,exynos3250-mipi-dsi
+ - samsung,exynos4210-mipi-dsi
+ - samsung,exynos5410-mipi-dsi
+ - samsung,exynos5422-mipi-dsi
+ - samsung,exynos5433-mipi-dsi
+ - fsl,imx8mm-mipi-dsim
+ - fsl,imx8mp-mipi-dsim
+ - items:
+ - const: fsl,imx8mn-mipi-dsim
+ - const: fsl,imx8mm-mipi-dsim
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ clocks:
+ minItems: 2
+ maxItems: 5
+
+ clock-names:
+ minItems: 2
+ maxItems: 5
+
+ samsung,phy-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: phandle to the samsung phy-type
+
+ power-domains:
+ maxItems: 1
+
+ samsung,power-domain:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the associated samsung power domain
+
+ vddcore-supply:
+ description: MIPI DSIM Core voltage supply (e.g. 1.1V)
+
+ vddio-supply:
+ description: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
+
+ samsung,burst-clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ DSIM high speed burst mode frequency. If absent,
+ the pixel clock from the attached device or bridge
+ will be used instead.
+
+ samsung,esc-clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ DSIM escape mode frequency.
+
+ samsung,pll-clock-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ DSIM oscillator clock frequency. If absent, the clock frequency
+ of sclk_mipi will be used instead.
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: dsim
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Input port node to receive pixel data from the
+ display controller. Exactly one endpoint must be
+ specified.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ DSI output port node to the panel or the next bridge
+ in the chain.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+ uniqueItems: true
+ items:
+ enum: [ 1, 2, 3, 4 ]
+
+ lane-polarities:
+ minItems: 1
+ maxItems: 5
+ description:
+ The Samsung MIPI DSI IP requires that all the data lanes have
+ the same polarity.
+
+ dependencies:
+ lane-polarities: [data-lanes]
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interrupts
+ - reg
+ - samsung,esc-clock-frequency
+
+allOf:
+ - $ref: ../dsi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos5433-mipi-dsi
+
+ then:
+ properties:
+ clocks:
+ minItems: 5
+
+ clock-names:
+ items:
+ - const: bus_clk
+ - const: phyclk_mipidphy0_bitclkdiv8
+ - const: phyclk_mipidphy0_rxclkesc0
+ - const: sclk_rgb_vclk_to_dsim0
+ - const: sclk_mipi
+
+ ports:
+ required:
+ - port@0
+
+ required:
+ - ports
+ - vddcore-supply
+ - vddio-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos5410-mipi-dsi
+
+ then:
+ properties:
+ clocks:
+ minItems: 2
+
+ clock-names:
+ items:
+ - const: bus_clk
+ - const: pll_clk
+
+ required:
+ - vddcore-supply
+ - vddio-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos4210-mipi-dsi
+
+ then:
+ properties:
+ clocks:
+ minItems: 2
+
+ clock-names:
+ items:
+ - const: bus_clk
+ - const: sclk_mipi
+
+ required:
+ - vddcore-supply
+ - vddio-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos3250-mipi-dsi
+
+ then:
+ properties:
+ clocks:
+ minItems: 2
+
+ clock-names:
+ items:
+ - const: bus_clk
+ - const: pll_clk
+
+ required:
+ - vddcore-supply
+ - vddio-supply
+ - samsung,phy-type
+
+additionalProperties:
+ type: object
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos5433.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ dsi@13900000 {
+ compatible = "samsung,exynos5433-mipi-dsi";
+ reg = <0x13900000 0xC0>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&mipi_phy 1>;
+ phy-names = "dsim";
+ clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+ <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+ <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+ <&cmu_disp CLK_SCLK_DSIM0>;
+ clock-names = "bus_clk",
+ "phyclk_mipidphy0_bitclkdiv8",
+ "phyclk_mipidphy0_rxclkesc0",
+ "sclk_rgb_vclk_to_dsim0",
+ "sclk_mipi";
+ power-domains = <&pd_disp>;
+ vddcore-supply = <&ldo6_reg>;
+ vddio-supply = <&ldo7_reg>;
+ samsung,burst-clock-frequency = <512000000>;
+ samsung,esc-clock-frequency = <16000000>;
+ samsung,pll-clock-frequency = <24000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&te_irq>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dsi_to_mic: endpoint {
+ remote-endpoint = <&mic_to_dsi>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/sil,sii8620.yaml b/Bindings/display/bridge/sil,sii8620.yaml
new file mode 100644
index 0000000..6d1a36b
--- /dev/null
+++ b/Bindings/display/bridge/sil,sii8620.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii8620.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI8620 HDMI/MHL bridge
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+ compatible:
+ const: sil,sii8620
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: xtal
+
+ cvcc10-supply:
+ description: Digital Core Supply Voltage (1.0V)
+
+ interrupts:
+ maxItems: 1
+
+ iovcc18-supply:
+ description: I/O Supply Voltage (1.8V)
+
+ reset-gpios:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ unevaluatedProperties: false
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for HDMI (encoder) input
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ MHL to connector port
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - cvcc10-supply
+ - interrupts
+ - iovcc18-supply
+ - reset-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@39 {
+ reg = <0x39>;
+ compatible = "sil,sii8620";
+ cvcc10-supply = <&ldo36_reg>;
+ iovcc18-supply = <&ldo34_reg>;
+ interrupt-parent = <&gpf0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "xtal";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mhl_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_mhl>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mhl_to_musb_con: endpoint {
+ remote-endpoint = <&musb_con_to_mhl>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/sil,sii9022.yaml b/Bindings/display/bridge/sil,sii9022.yaml
new file mode 100644
index 0000000..5a69547
--- /dev/null
+++ b/Bindings/display/bridge/sil,sii9022.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image sii902x HDMI bridge
+
+maintainers:
+ - Boris Brezillon <bbrezillon@kernel.org>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - sil,sii9022-cpi # CEC Programming Interface
+ - sil,sii9022-tpi # Transmitter Programming Interface
+ - const: sil,sii9022
+ - const: sil,sii9022
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description: Interrupt line used to inform the host about hotplug events.
+
+ reset-gpios:
+ maxItems: 1
+
+ iovcc-supply:
+ description: I/O Supply Voltage (1.8V or 3.3V)
+
+ cvcc12-supply:
+ description: Digital Core Supply Voltage (1.2V)
+
+ '#sound-dai-cells':
+ enum: [ 0, 1 ]
+ description: |
+ <0> if only I2S or S/PDIF pin is wired,
+ <1> if both are wired.
+ HDMI audio is configured only if this property is found.
+ If HDMI audio is configured, the sii902x device becomes an I2S and/or
+ S/PDIF audio codec component (e.g. a digital audio sink), that can be
+ used in configuring full audio devices with simple-card or
+ audio-graph-card bindings. See their binding documents on how to describe
+ the way the
+ sii902x device is connected to the rest of the audio system:
+ Documentation/devicetree/bindings/sound/simple-card.yaml
+ Documentation/devicetree/bindings/sound/audio-graph-card.yaml
+ Note: In case of the audio-graph-card binding the used port index should
+ be 3.
+
+ sil,i2s-data-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+ uniqueItems: true
+ items:
+ enum: [ 0, 1, 2, 3 ]
+ description:
+ Each integer indicates which I2S pin is connected to which audio FIFO.
+ The first integer selects the I2S audio pin for the first audio FIFO#0
+ (HDMI channels 1&2), the second for FIFO#1 (HDMI channels 3&4), and so
+ on. There are 4 FIFOs and 4 I2S pins (SD0 - SD3). Any I2S pin can be
+ connected to any FIFO, but there can be no gaps. E.g. an I2S pin must be
+ mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2. The
+ default value is <0>, describing SD0 pin being routed to HDMI audio
+ FIFO#0.
+
+ clocks:
+ maxItems: 1
+ description: MCLK input. MCLK can be used to produce HDMI audio CTS values.
+
+ clock-names:
+ const: mclk
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Parallel RGB input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: HDMI output port
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Sound input port
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi-bridge@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+ reset-gpios = <&pioA 1 0>;
+ iovcc-supply = <&v3v3_hdmi>;
+ cvcc12-supply = <&v1v2_hdmi>;
+
+ #sound-dai-cells = <0>;
+ sil,i2s-data-lanes = < 0 1 2 >;
+ clocks = <&mclk>;
+ clock-names = "mclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ bridge_in: endpoint {
+ remote-endpoint = <&dc_out>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/sil,sii9234.yaml b/Bindings/display/bridge/sil,sii9234.yaml
new file mode 100644
index 0000000..176181d
--- /dev/null
+++ b/Bindings/display/bridge/sil,sii9234.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI9234 HDMI/MHL bridge
+
+maintainers:
+ - Maciej Purski <m.purski@samsung.com>
+
+properties:
+ compatible:
+ const: sil,sii9234
+
+ reg:
+ description: I2C address for TPI interface
+ maxItems: 1
+
+ avcc12-supply:
+ description: TMDS Analog Supply Voltage, 1.2V
+
+ avcc33-supply:
+ description: MHL/USB Switch Supply Voltage, 3.3V
+
+ cvcc12-supply:
+ description: Digital Core Supply Voltage, 1.2V
+
+ iovcc18-supply:
+ description: I/O voltage supply, 1.8V
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO connected to the reset pin.
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for HDMI (encoder) input
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ MHL to connector port
+
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - avcc12-supply
+ - avcc33-supply
+ - cvcc12-supply
+ - iovcc18-supply
+ - interrupts
+ - reset-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@39 {
+ compatible = "sil,sii9234";
+ reg = <0x39>;
+ avcc12-supply = <&vsil12>;
+ avcc33-supply = <&vcc33mhl>;
+ cvcc12-supply = <&vsil12>;
+ iovcc18-supply = <&vcc18mhl>;
+ interrupt-parent = <&gpf3>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mhl_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_mhl>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mhl_to_connector: endpoint {
+ remote-endpoint = <&connector_to_mhl>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/simple-bridge.yaml b/Bindings/display/bridge/simple-bridge.yaml
new file mode 100644
index 0000000..43cf4df
--- /dev/null
+++ b/Bindings/display/bridge/simple-bridge.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/simple-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Transparent non-programmable DRM bridges
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+ - Maxime Ripard <mripard@kernel.org>
+
+description: |
+ This binding supports transparent non-programmable bridges that don't require
+ any configuration, with a single input and a single output.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ti,ths8134a
+ - ti,ths8134b
+ - const: ti,ths8134
+ - items:
+ - const: corpro,gm7123
+ - const: adi,adv7123
+ - enum:
+ - adi,adv7123
+ - dumb-vga-dac
+ - ti,opa362
+ - ti,ths8134
+ - ti,ths8135
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The bridge input
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The bridge output
+
+ required:
+ - port@0
+ - port@1
+
+ enable-gpios:
+ maxItems: 1
+ description: GPIO controlling bridge enable
+
+ vdd-supply:
+ description: Power supply for the bridge
+
+required:
+ - compatible
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ bridge {
+ compatible = "ti,ths8134a", "ti,ths8134";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ vga_bridge_in: endpoint {
+ remote-endpoint = <&tcon0_out_vga>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ vga_bridge_out: endpoint {
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Bindings/display/bridge/snps,dw-mipi-dsi.yaml
new file mode 100644
index 0000000..8747b95
--- /dev/null
+++ b/Bindings/display/bridge/snps,dw-mipi-dsi.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare MIPI DSI host controller
+
+maintainers:
+ - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+ This document defines device tree properties for the Synopsys DesignWare MIPI
+ DSI host controller. It doesn't constitute a device tree binding specification
+ by itself but is meant to be referenced by platform-specific device tree
+ bindings.
+
+ When referenced from platform device tree bindings the properties defined in
+ this document are defined as follows. The platform device tree bindings are
+ responsible for defining whether each property is required or optional.
+
+allOf:
+ - $ref: ../dsi-controller.yaml#
+
+properties:
+ reg:
+ maxItems: 1
+
+ clocks: true
+
+ clock-names: true
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: apb
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input node to receive pixel data.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI output node to panel.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - clock-names
+ - clocks
+ - ports
+ - reg
+
+additionalProperties: true
diff --git a/Bindings/display/bridge/synopsys,dw-hdmi.yaml b/Bindings/display/bridge/synopsys,dw-hdmi.yaml
new file mode 100644
index 0000000..4b7e54a
--- /dev/null
+++ b/Bindings/display/bridge/synopsys,dw-hdmi.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/synopsys,dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Synopsys DesignWare HDMI TX Controller
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+ This document defines device tree properties for the Synopsys DesignWare HDMI
+ TX controller (DWC HDMI TX) IP core. It doesn't constitute a full device tree
+ binding specification by itself but is meant to be referenced by device tree
+ bindings for the platform-specific integrations of the DWC HDMI TX.
+
+ When referenced from platform device tree bindings the properties defined in
+ this document are defined as follows. The platform device tree bindings are
+ responsible for defining whether each property is required or optional.
+
+properties:
+ reg:
+ maxItems: 1
+
+ reg-io-width:
+ description:
+ Width (in bytes) of the registers specified by the reg property.
+ enum: [1, 4]
+ default: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 5
+ items:
+ - description: The bus clock for either AHB and APB
+ - description: The internal register configuration clock
+ additionalItems: true
+
+ clock-names:
+ minItems: 2
+ maxItems: 5
+ items:
+ - const: iahb
+ - const: isfr
+ additionalItems: true
+
+ interrupts:
+ maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Bindings/display/bridge/thine,thc63lvd1024.yaml b/Bindings/display/bridge/thine,thc63lvd1024.yaml
new file mode 100644
index 0000000..8ae3824
--- /dev/null
+++ b/Bindings/display/bridge/thine,thc63lvd1024.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thine Electronics THC63LVD1024 LVDS Decoder
+
+maintainers:
+ - Jacopo Mondi <jacopo+renesas@jmondi.org>
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+ The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS
+ streams to parallel data outputs. The chip supports single/dual input/output
+ modes, handling up to two LVDS input streams and up to two digital CMOS/TTL
+ outputs.
+
+ Single or dual operation mode, output data mapping and DDR output modes are
+ configured through input signals and the chip does not expose any control
+ bus.
+
+properties:
+ compatible:
+ const: thine,thc63lvd1024
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ The device can operate in single or dual input and output modes.
+
+ When operating in single input mode, all pixels are received on port@0,
+ and port@1 shall not contain any endpoint. In dual input mode,
+ even-numbered pixels are received on port@0 and odd-numbered pixels on
+ port@1, and both port@0 and port@1 shall contain endpoints.
+
+ When operating in single output mode all pixels are output from the first
+ CMOS/TTL port and port@3 shall not contain any endpoint. In dual output
+ mode pixels are output from both CMOS/TTL ports and both port@2 and
+ port@3 shall contain endpoints.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: First LVDS input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Second LVDS input port
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: First digital CMOS/TTL parallel output
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Second digital CMOS/TTL parallel output
+
+ required:
+ - port@0
+ - port@2
+
+ oe-gpios:
+ maxItems: 1
+ description: Output enable GPIO signal, pin name "OE", active high.
+
+ powerdown-gpios:
+ maxItems: 1
+ description: Power down GPIO signal, pin name "/PDWN", active low.
+
+ vcc-supply:
+ description:
+ Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and
+ digital circuitry.
+
+required:
+ - compatible
+ - ports
+ - vcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+
+ vcc-supply = <®_lvds_vcc>;
+ powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_dec_in_0: endpoint {
+ remote-endpoint = <&lvds_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ lvds_dec_out_2: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/ti,dlpc3433.yaml b/Bindings/display/bridge/ti,dlpc3433.yaml
new file mode 100644
index 0000000..d3f84d2
--- /dev/null
+++ b/Bindings/display/bridge/ti,dlpc3433.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DLPC3433 MIPI DSI to DMD bridge
+
+maintainers:
+ - Jagan Teki <jagan@amarulasolutions.com>
+ - Christopher Vollo <chris@renewoutreach.org>
+
+description: |
+ TI DLPC3433 is a MIPI DSI based display controller bridge
+ for processing high resolution DMD based projectors.
+
+ It has a flexible configuration of MIPI DSI and DPI signal
+ input that produces a DMD output in RGB565, RGB666, RGB888
+ formats.
+
+ It supports upto 720p resolution with 60 and 120 Hz refresh
+ rates.
+
+properties:
+ compatible:
+ const: ti,dlpc3433
+
+ reg:
+ enum:
+ - 0x1b
+ - 0x1d
+
+ enable-gpios:
+ description: PROJ_ON pin, chip powers up PROJ_ON is high.
+
+ vcc_intf-supply:
+ description: A 1.8V/3.3V supply that power the Host I/O.
+
+ vcc_flsh-supply:
+ description: A 1.8V/3.3V supply that power the Flash I/O.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Video port for MIPI DSI input.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description: array of physical DSI data lane indexes.
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for DMD output.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@1b {
+ compatible = "ti,dlpc3433";
+ reg = <0x1b>;
+ enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ bridge_in_dsi: endpoint {
+ remote-endpoint = <&dsi_out_bridge>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ bridge_out_panel: endpoint {
+ remote-endpoint = <&panel_out_bridge>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/ti,sn65dsi83.yaml b/Bindings/display/bridge/ti,sn65dsi83.yaml
new file mode 100644
index 0000000..48a97bb
--- /dev/null
+++ b/Bindings/display/bridge/ti,sn65dsi83.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SN65DSI83 and SN65DSI84 DSI to LVDS bridge chip
+
+maintainers:
+ - Marek Vasut <marex@denx.de>
+
+description: |
+ Texas Instruments SN65DSI83 1x Single-link MIPI DSI
+ to 1x Single-link LVDS
+ https://www.ti.com/lit/gpn/sn65dsi83
+ Texas Instruments SN65DSI84 1x Single-link MIPI DSI
+ to 1x Dual-link or 2x Single-link LVDS
+ https://www.ti.com/lit/gpn/sn65dsi84
+
+properties:
+ compatible:
+ enum:
+ - ti,sn65dsi83
+ - ti,sn65dsi84
+
+ reg:
+ enum:
+ - 0x2c
+ - 0x2d
+
+ enable-gpios:
+ maxItems: 1
+ description: GPIO specifier for bridge_en pin (active high).
+
+ vcc-supply:
+ description: A 1.8V power supply (see regulator/regulator.yaml).
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Video port for MIPI DSI Channel-A input
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description: array of physical DSI data lane indexes.
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Video port for MIPI DSI Channel-B input
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description: array of physical DSI data lane indexes.
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for LVDS Channel-A output (panel or bridge).
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for LVDS Channel-B output (panel or bridge).
+
+ required:
+ - port@0
+ - port@2
+
+required:
+ - compatible
+ - reg
+ - ports
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,sn65dsi83
+ then:
+ properties:
+ ports:
+ properties:
+ port@1: false
+ port@3: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,sn65dsi84
+ then:
+ properties:
+ ports:
+ properties:
+ port@1: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@2d {
+ compatible = "ti,sn65dsi83";
+ reg = <0x2d>;
+
+ enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <®_sn65dsi83_1v8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&dsi0_out>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/ti,sn65dsi86.yaml b/Bindings/display/bridge/ti,sn65dsi86.yaml
new file mode 100644
index 0000000..6ec6d28
--- /dev/null
+++ b/Bindings/display/bridge/ti,sn65dsi86.yaml
@@ -0,0 +1,273 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi86.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SN65DSI86 DSI to eDP bridge chip
+
+maintainers:
+ - Sandeep Panda <spanda@codeaurora.org>
+
+description: |
+ The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
+ https://www.ti.com/general/docs/lit/getliterature.tsp?genericPartNumber=sn65dsi86&fileType=pdf
+
+properties:
+ compatible:
+ const: ti,sn65dsi86
+
+ reg:
+ enum: [ 0x2c, 0x2d ]
+
+ enable-gpios:
+ maxItems: 1
+ description: GPIO specifier for bridge_en pin (active high).
+
+ suspend-gpios:
+ maxItems: 1
+ description: GPIO specifier for GPIO1 pin on bridge (active low).
+
+ no-hpd:
+ type: boolean
+ description:
+ Set if the HPD line on the bridge isn't hooked up to anything or is
+ otherwise unusable.
+
+ vccio-supply:
+ description: A 1.8V supply that powers the digital IOs.
+
+ vpll-supply:
+ description: A 1.8V supply that powers the DisplayPort PLL.
+
+ vcca-supply:
+ description: A 1.2V supply that powers the analog circuits.
+
+ vcc-supply:
+ description: A 1.2V supply that powers the digital core.
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description:
+ Clock specifier for input reference clock. The reference clock rate must
+ be 12 MHz, 19.2 MHz, 26 MHz, 27 MHz or 38.4 MHz.
+
+ clock-names:
+ const: refclk
+
+ gpio-controller: true
+ '#gpio-cells':
+ const: 2
+ description:
+ First cell is pin number, second cell is flags. GPIO pin numbers are
+ 1-based to match the datasheet. See ../../gpio/gpio.txt for more
+ information.
+
+ '#pwm-cells':
+ const: 1
+ description: See ../../pwm/pwm.yaml for description of the cell formats.
+
+ aux-bus:
+ $ref: /schemas/display/dp-aux-bus.yaml#
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for MIPI DSI input
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Video port for eDP output (panel or connector).
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ oneOf:
+ - minItems: 1
+ maxItems: 1
+ uniqueItems: true
+ items:
+ enum:
+ - 0
+ - 1
+ description:
+ If you have 1 logical lane the bridge supports routing
+ to either port 0 or port 1. Port 0 is suggested.
+
+ - minItems: 2
+ maxItems: 2
+ uniqueItems: true
+ items:
+ enum:
+ - 0
+ - 1
+ description:
+ If you have 2 logical lanes the bridge supports
+ reordering but only on physical ports 0 and 1.
+
+ - minItems: 4
+ maxItems: 4
+ uniqueItems: true
+ items:
+ enum:
+ - 0
+ - 1
+ - 2
+ - 3
+ description:
+ If you have 4 logical lanes the bridge supports
+ reordering in any way.
+
+ lane-polarities:
+ minItems: 1
+ maxItems: 4
+ items:
+ enum:
+ - 0
+ - 1
+
+ dependencies:
+ lane-polarities: [data-lanes]
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vccio-supply
+ - vpll-supply
+ - vcca-supply
+ - vcc-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@2d {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2d>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+ vpll-supply = <&src_pp1800_s4a>;
+ vccio-supply = <&src_pp1800_s4a>;
+ vcca-supply = <&src_pp1200_l2a>;
+ vcc-supply = <&src_pp1200_l2a>;
+
+ clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+ clock-names = "refclk";
+
+ no-hpd;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ sn65dsi86_out: endpoint {
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel {
+ compatible = "boe,nv133fhm-n62";
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+ };
+ };
+ };
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@2d {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2d>;
+
+ enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
+ suspend-gpios = <&msmgpio 34 GPIO_ACTIVE_LOW>;
+
+ interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>;
+
+ vccio-supply = <&pm8916_l17>;
+ vcca-supply = <&pm8916_l6>;
+ vpll-supply = <&pm8916_l17>;
+ vcc-supply = <&pm8916_l6>;
+
+ clock-names = "refclk";
+ clocks = <&input_refclk>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ edp_bridge_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ edp_bridge_out: endpoint {
+ data-lanes = <2 1 3 0>;
+ lane-polarities = <0 1 0 1>;
+ remote-endpoint = <&edp_panel_in>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/ti,tfp410.yaml b/Bindings/display/bridge/ti,tfp410.yaml
new file mode 100644
index 0000000..4c5dd8e
--- /dev/null
+++ b/Bindings/display/bridge/ti,tfp410.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TFP410 DPI to DVI encoder
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+ - Jyri Sarha <jsarha@ti.com>
+
+properties:
+ compatible:
+ const: ti,tfp410
+
+ reg:
+ description: I2C address of the device.
+ maxItems: 1
+
+ powerdown-gpios:
+ maxItems: 1
+
+ ti,deskew:
+ description:
+ Data de-skew value in 350ps increments, from 0 to 7, as configured
+ through the DK[3:1] pins. The de-skew multiplier is computed as
+ (DK[3:1] - 4), so it ranges from -4 to 3.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: DPI input port.
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ pclk-sample:
+ description:
+ Endpoint sampling edge.
+ enum:
+ - 0 # Falling edge
+ - 1 # Rising edge
+ default: 0
+
+ bus-width:
+ description:
+ Endpoint bus width.
+ enum:
+ - 12 # 12 data lines connected and dual-edge mode
+ - 24 # 24 data lines connected and single-edge mode
+ default: 24
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DVI output port.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - ports
+
+if:
+ required:
+ - reg
+then:
+ properties:
+ ti,deskew: false
+else:
+ required:
+ - ti,deskew
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ tfp410: encoder {
+ compatible = "ti,tfp410";
+ powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+ ti,deskew = <3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ tfp410_in: endpoint {
+ pclk-sample = <1>;
+ bus-width = <24>;
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ tfp410_out: endpoint {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/toshiba,tc358762.yaml b/Bindings/display/bridge/toshiba,tc358762.yaml
new file mode 100644
index 0000000..6c1de0b
--- /dev/null
+++ b/Bindings/display/bridge/toshiba,tc358762.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge
+
+maintainers:
+ - Marek Vasut <marex@denx.de>
+
+description: |
+ The TC358762 is bridge device which converts MIPI DSI to MIPI DPI.
+
+properties:
+ compatible:
+ enum:
+ - toshiba,tc358762
+
+ reg:
+ maxItems: 1
+ description: virtual channel number of a DSI peripheral
+
+ reset-gpios:
+ maxItems: 1
+
+ vddc-supply:
+ description: Regulator for 1.2V internal core power.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for MIPI DSI input
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for MIPI DPI output (panel or connector).
+
+ required:
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vddc-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@0 {
+ reg = <0>;
+ compatible = "toshiba,tc358762";
+ vddc-supply = <&vcc_1v2_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ bridge_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/bridge/toshiba,tc358764.yaml b/Bindings/display/bridge/toshiba,tc358764.yaml
new file mode 100644
index 0000000..8666074
--- /dev/null
+++ b/Bindings/display/bridge/toshiba,tc358764.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358764.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358764 MIPI-DSI to LVDS bridge
+
+maintainers:
+ - Andrzej Hajda <andrzej.hajda@intel.com>
+
+properties:
+ compatible:
+ const: toshiba,tc358764
+
+ reg:
+ description: Virtual channel number of a DSI peripheral
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ vddc-supply:
+ description: Core voltage supply, 1.2V
+
+ vddio-supply:
+ description: I/O voltage supply, 1.8V or 3.3V
+
+ vddlvds-supply:
+ description: LVDS1/2 voltage supply, 3.3V
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for MIPI DSI input, if the bridge DSI controlled
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for LVDS output (panel or connector).
+
+ required:
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - vddc-supply
+ - vddio-supply
+ - vddlvds-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@0 {
+ compatible = "toshiba,tc358764";
+ reg = <0>;
+
+ reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+ vddc-supply = <&vcc_1v2_reg>;
+ vddio-supply = <&vcc_1v8_reg>;
+ vddlvds-supply = <&vcc_3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ lvds_ep: endpoint {
+ remote-endpoint = <&panel_ep>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/toshiba,tc358767.yaml b/Bindings/display/bridge/toshiba,tc358767.yaml
new file mode 100644
index 0000000..ae894d9
--- /dev/null
+++ b/Bindings/display/bridge/toshiba,tc358767.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358767/TC358867/TC9595 DSI/DPI/eDP bridge
+
+maintainers:
+ - Andrey Gusakov <andrey.gusakov@cogentembedded.com>
+
+description: |
+ The TC358767/TC358867/TC9595 is bridge device which
+ converts DSI/DPI to eDP/DP .
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - toshiba,tc358867
+ - toshiba,tc9595
+ - const: toshiba,tc358767
+ - const: toshiba,tc358767
+
+ reg:
+ enum:
+ - 0x68
+ - 0x0f
+ description: |
+ i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
+
+ clock-names:
+ const: ref
+
+ clocks:
+ maxItems: 1
+ description: |
+ OF device-tree clock specification for refclk input. The reference.
+ clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
+
+ shutdown-gpios:
+ maxItems: 1
+ description: |
+ OF device-tree gpio specification for SD pin(active high shutdown input)
+
+ reset-gpios:
+ maxItems: 1
+ description: |
+ OF device-tree gpio specification for RSTX pin(active low system reset)
+
+ interrupts:
+ maxItems: 1
+
+ toshiba,hpd-pin:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0
+ - 1
+ description: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: |
+ DSI input port. The remote endpoint phandle should be a
+ reference to a valid DSI output endpoint node
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description: array of physical DSI data lane indexes.
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ DPI input/output port. The remote endpoint phandle should be a
+ reference to a valid DPI output or input endpoint node.
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ eDP/DP output port. The remote endpoint phandle should be a
+ reference to a valid eDP panel input endpoint node. This port is
+ optional, treated as DP panel if not defined
+
+ oneOf:
+ - required:
+ - port@0
+ - required:
+ - port@1
+
+
+required:
+ - compatible
+ - reg
+ - clock-names
+ - clocks
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ /* DPI input and eDP output */
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp-bridge@68 {
+ compatible = "toshiba,tc358767";
+ reg = <0x68>;
+ shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ clock-names = "ref";
+ clocks = <&edp_refclk>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ bridge_in_0: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+ };
+ - |
+ /* DPI input and DP output */
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp-bridge@68 {
+ compatible = "toshiba,tc358767";
+ reg = <0x68>;
+ shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ clock-names = "ref";
+ clocks = <&edp_refclk>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ bridge_in_1: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/toshiba,tc358768.yaml b/Bindings/display/bridge/toshiba,tc358768.yaml
new file mode 100644
index 0000000..779d8c5
--- /dev/null
+++ b/Bindings/display/bridge/toshiba,tc358768.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358768.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toschiba TC358768/TC358778 Parallel RGB to MIPI DSI bridge
+
+maintainers:
+ - Peter Ujfalusi <peter.ujfalusi@ti.com>
+
+description: |
+ The TC358768/TC358778 is bridge device which converts RGB to DSI.
+
+properties:
+ compatible:
+ enum:
+ - toshiba,tc358768
+ - toshiba,tc358778
+
+ reg:
+ maxItems: 1
+ description: base I2C address of the device
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active low RESX pin
+
+ vddc-supply:
+ description: Regulator for 1.2V internal core power.
+
+ vddmipi-supply:
+ description: Regulator for 1.2V for the MIPI.
+
+ vddio-supply:
+ description: Regulator for 1.8V - 3.3V IO power.
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: refclk
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: |
+ Video port for RGB input
+
+ properties:
+ endpoint:
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
+
+ properties:
+ data-lines:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 16, 18, 24 ]
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Video port for DSI output (panel or connector).
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vddc-supply
+ - vddmipi-supply
+ - vddio-supply
+ - ports
+
+allOf:
+ - $ref: ../dsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsi_bridge: dsi@e {
+ compatible = "toshiba,tc358768";
+ reg = <0xe>;
+
+ clocks = <&tc358768_refclk>;
+ clock-names = "refclk";
+
+ reset-gpios = <&pcf_display_board 0 GPIO_ACTIVE_LOW>;
+
+ vddc-supply = <&v1_2d>;
+ vddmipi-supply = <&v1_2d>;
+ vddio-supply = <&v3_3d>;
+
+ dsi_bridge_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ rgb_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ data-lines = <24>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/bridge/toshiba,tc358775.yaml b/Bindings/display/bridge/toshiba,tc358775.yaml
new file mode 100644
index 0000000..d879c70
--- /dev/null
+++ b/Bindings/display/bridge/toshiba,tc358775.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358775 DSI to LVDS bridge
+
+maintainers:
+ - Vinay Simha BN <simhavcs@gmail.com>
+
+description: |
+ This binding supports DSI to LVDS bridge TC358775
+
+ MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
+ Video frame size:
+ Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display panel
+ limited by 135 MHz LVDS speed
+ Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS display
+ panel, limited by 270 MHz LVDS speed.
+
+properties:
+ compatible:
+ const: toshiba,tc358775
+
+ reg:
+ maxItems: 1
+ description: i2c address of the bridge, 0x0f
+
+ vdd-supply:
+ description: 1.2V LVDS Power Supply
+
+ vddio-supply:
+ description: 1.8V IO Power Supply
+
+ stby-gpios:
+ maxItems: 1
+ description: Standby pin, Low active
+
+ reset-gpios:
+ maxItems: 1
+ description: Hardware reset, Low active
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ DSI Input. The remote endpoint phandle should be a
+ reference to a valid mipi_dsi_host device node.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Video port for LVDS output (panel or connector).
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Video port for Dual link LVDS output (panel or connector).
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vddio-supply
+ - stby-gpios
+ - reset-gpios
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ /* For single-link LVDS display panel */
+
+ i2c@78b8000 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ reg = <0x078b8000 0x500>;
+ clock-frequency = <400000>; /* fastmode operation */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tc_bridge: bridge@f {
+ compatible = "toshiba,tc358775";
+ reg = <0x0f>;
+
+ vdd-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+
+ stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ d2l_in_test: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+ };
+
+ dsi@1a98000 {
+ reg = <0x1a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ remote-endpoint = <&d2l_in_test>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
+
+ - |
+ /* For dual-link LVDS display panel */
+
+ i2c@78b8000 {
+ /* On High speed expansion */
+ label = "HS-I2C2";
+ reg = <0x078b8000 0x500>;
+ clock-frequency = <400000>; /* fastmode operation */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tc_bridge_dual: bridge@f {
+ compatible = "toshiba,tc358775";
+ reg = <0x0f>;
+
+ vdd-supply = <&pm8916_l2>;
+ vddio-supply = <&pm8916_l6>;
+
+ stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ d2l_in_dual: endpoint {
+ remote-endpoint = <&dsi0_out_dual>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ lvds1_out: endpoint {
+ remote-endpoint = <&panel_in1>;
+ };
+ };
+ };
+ };
+ };
+
+ dsi@1a98000 {
+ reg = <0x1a98000 0x25c>;
+ reg-names = "dsi_ctrl";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ dsi0_out_dual: endpoint {
+ remote-endpoint = <&d2l_in_dual>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/cirrus,clps711x-fb.txt b/Bindings/display/cirrus,clps711x-fb.txt
new file mode 100644
index 0000000..84c75f8
--- /dev/null
+++ b/Bindings/display/cirrus,clps711x-fb.txt
@@ -0,0 +1,47 @@
+* Cirrus Logic CLPS711X Framebuffer
+
+Required properties:
+- compatible: Shall contain "cirrus,ep7209-fb".
+- reg : Physical base address and length of the controller's registers +
+ location and size of the framebuffer memory.
+- clocks : phandle + clock specifier pair of the FB reference clock.
+- display : phandle to a display node as described in
+ Documentation/devicetree/bindings/display/panel/display-timing.txt.
+ Additionally, the display node has to define properties:
+ - bits-per-pixel: Bits per pixel.
+ - ac-prescale : LCD AC bias frequency. This frequency is the required
+ AC bias frequency for a given manufacturer's LCD plate.
+ - cmap-invert : Invert the color levels (Optional).
+
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+
+Example:
+ fb: fb@800002c0 {
+ compatible = "cirrus,ep7312-fb", "cirrus,ep7209-fb";
+ reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
+ clocks = <&clks 2>;
+ lcd-supply = <®5v0>;
+ display = <&display>;
+ };
+
+ display: display {
+ model = "320x240x4";
+ bits-per-pixel = <4>;
+ ac-prescale = <17>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 320x240 {
+ hactive = <320>;
+ hback-porch = <0>;
+ hfront-porch = <0>;
+ hsync-len = <0>;
+ vactive = <240>;
+ vback-porch = <0>;
+ vfront-porch = <0>;
+ vsync-len = <0>;
+ clock-frequency = <6500000>;
+ };
+ };
+ };
diff --git a/Bindings/display/connector/analog-tv-connector.yaml b/Bindings/display/connector/analog-tv-connector.yaml
new file mode 100644
index 0000000..a31ca2d
--- /dev/null
+++ b/Bindings/display/connector/analog-tv-connector.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/analog-tv-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog TV Connector
+
+maintainers:
+ - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+ compatible:
+ enum:
+ - composite-video-connector
+ - svideo-connector
+
+ label: true
+
+ sdtv-standards:
+ description:
+ Limit the supported TV standards on a connector to the given ones. If
+ not specified all TV standards are allowed. Possible TV standards are
+ defined in include/dt-bindings/display/sdtv-standards.h.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Connection to controller providing analog TV signals
+
+required:
+ - compatible
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/display/sdtv-standards.h>
+
+ connector {
+ compatible = "composite-video-connector";
+ label = "tv";
+ sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>;
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/connector/dp-connector.yaml b/Bindings/display/connector/dp-connector.yaml
new file mode 100644
index 0000000..22792a7
--- /dev/null
+++ b/Bindings/display/connector/dp-connector.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/dp-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DisplayPort Connector
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+properties:
+ compatible:
+ const: dp-connector
+
+ label: true
+
+ type:
+ enum:
+ - full-size
+ - mini
+
+ hpd-gpios:
+ description: A GPIO line connected to HPD
+ maxItems: 1
+
+ dp-pwr-supply:
+ description: Power supply for the DP_PWR pin
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Connection to controller providing DP signals
+
+required:
+ - compatible
+ - type
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ connector {
+ compatible = "dp-connector";
+ label = "dp0";
+ type = "full-size";
+
+ port {
+ dp_connector_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/connector/dvi-connector.yaml b/Bindings/display/connector/dvi-connector.yaml
new file mode 100644
index 0000000..93eb142
--- /dev/null
+++ b/Bindings/display/connector/dvi-connector.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/dvi-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DVI Connector
+
+maintainers:
+ - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+ compatible:
+ const: dvi-connector
+
+ label: true
+
+ hpd-gpios:
+ description: A GPIO line connected to HPD
+ maxItems: 1
+
+ ddc-i2c-bus:
+ description: phandle link to the I2C controller used for DDC EDID probing
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ analog:
+ type: boolean
+ description: the connector has DVI analog pins
+
+ digital:
+ type: boolean
+ description: the connector has DVI digital pins
+
+ dual-link:
+ type: boolean
+ description: the connector has pins for DVI dual-link
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Connection to controller providing DVI signals
+
+required:
+ - compatible
+ - port
+
+anyOf:
+ - required:
+ - analog
+ - required:
+ - digital
+
+additionalProperties: false
+
+examples:
+ - |
+ connector {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/connector/hdmi-connector.yaml b/Bindings/display/connector/hdmi-connector.yaml
new file mode 100644
index 0000000..3ee8f92
--- /dev/null
+++ b/Bindings/display/connector/hdmi-connector.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/hdmi-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI Connector
+
+maintainers:
+ - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+ compatible:
+ const: hdmi-connector
+
+ type:
+ description: The HDMI connector type
+ enum:
+ - a # Standard full size
+ - b # Never deployed?
+ - c # Mini
+ - d # Micro
+ - e # automotive
+
+ label: true
+
+ hpd-gpios:
+ description: A GPIO line connected to HPD
+ maxItems: 1
+
+ ddc-i2c-bus:
+ description: phandle link to the I2C controller used for DDC EDID probing
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ ddc-en-gpios:
+ description: GPIO signal to enable DDC bus
+ maxItems: 1
+
+ hdmi-pwr-supply:
+ description: Power supply for the HDMI +5V Power pin
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Connection to controller providing HDMI signals
+
+required:
+ - compatible
+ - port
+ - type
+
+additionalProperties: false
+
+examples:
+ - |
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/connector/vga-connector.yaml b/Bindings/display/connector/vga-connector.yaml
new file mode 100644
index 0000000..25f8680
--- /dev/null
+++ b/Bindings/display/connector/vga-connector.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/connector/vga-connector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VGA Connector
+
+maintainers:
+ - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
+
+properties:
+ compatible:
+ const: vga-connector
+
+ label: true
+
+ ddc-i2c-bus:
+ description: phandle link to the I2C controller used for DDC EDID probing
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Connection to controller providing VGA signals
+
+required:
+ - compatible
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ connector {
+ compatible = "vga-connector";
+ label = "vga";
+
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ vga_connector_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/dp-aux-bus.yaml b/Bindings/display/dp-aux-bus.yaml
new file mode 100644
index 0000000..0ece7b0
--- /dev/null
+++ b/Bindings/display/dp-aux-bus.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/dp-aux-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DisplayPort AUX bus
+
+maintainers:
+ - Douglas Anderson <dianders@chromium.org>
+
+description:
+ DisplayPort controllers provide a control channel to the sinks that
+ are hooked up to them. This is the DP AUX bus. Over the DP AUX bus
+ we can query properties about a sink and also configure it. In
+ particular, DP sinks support DDC over DP AUX which allows tunneling
+ a standard I2C DDC connection over the AUX channel.
+
+ To model this relationship, DP sinks should be placed as children
+ of the DP controller under the "aux-bus" node.
+
+ At the moment, this binding only handles the eDP case. It is
+ possible it will be extended in the future to handle the DP case.
+ For DP, presumably a connector would be listed under the DP AUX
+ bus instead of a panel.
+
+properties:
+ $nodename:
+ const: aux-bus
+
+ panel:
+ $ref: panel/panel-common.yaml#
+
+additionalProperties: false
+
+required:
+ - panel
diff --git a/Bindings/display/dsi-controller.yaml b/Bindings/display/dsi-controller.yaml
new file mode 100644
index 0000000..67ce103
--- /dev/null
+++ b/Bindings/display/dsi-controller.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/dsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for DSI Display Panels
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ This document defines device tree properties common to DSI, Display
+ Serial Interface controllers and attached panels. It doesn't constitute
+ a device tree binding specification by itself but is meant to be referenced
+ by device tree bindings.
+
+ When referenced from panel device tree bindings the properties defined in
+ this document are defined as follows. The panel device tree bindings are
+ responsible for defining whether each property is required or optional.
+
+ Notice: this binding concerns DSI panels connected directly to a master
+ without any intermediate port graph to the panel. Each DSI master
+ can control one to four virtual channels to one panel. Each virtual
+ channel should have a node "panel" for their virtual channel with their
+ reg-property set to the virtual channel number, usually there is just
+ one virtual channel, number 0.
+
+properties:
+ $nodename:
+ pattern: "^dsi(@.*)?$"
+
+ clock-master:
+ type: boolean
+ description:
+ Should be enabled if the host is being used in conjunction with
+ another DSI host to drive the same peripheral. Hardware supporting
+ such a configuration generally requires the data on both the busses
+ to be driven by the same clock. Only the DSI host instance
+ controlling this clock should contain this property.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^panel@[0-3]$":
+ description: Panels connected to the DSI link
+ type: object
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 3
+ description:
+ The virtual channel number of a DSI peripheral. Must be in the range
+ from 0 to 3, as DSI uses a 2-bit addressing scheme. Some DSI
+ peripherals respond to more than a single virtual channel. In that
+ case the reg property can take multiple entries, one for each virtual
+ channel that the peripheral responds to.
+
+ enforce-video-mode:
+ type: boolean
+ description:
+ The best option is usually to run a panel in command mode, as this
+ gives better control over the panel hardware. However for different
+ reasons like broken hardware, missing features or testing, it may be
+ useful to be able to force a command mode-capable panel into video
+ mode.
+
+ required:
+ - reg
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ dsi@a0351000 {
+ reg = <0xa0351000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "sony,acx424akp";
+ reg = <0>;
+ vddi-supply = <&ab8500_ldo_aux1_reg>;
+ reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+...
diff --git a/Bindings/display/exynos/exynos_dp.txt b/Bindings/display/exynos/exynos_dp.txt
new file mode 100644
index 0000000..3a40159
--- /dev/null
+++ b/Bindings/display/exynos/exynos_dp.txt
@@ -0,0 +1,112 @@
+The Exynos display port interface should be configured based on
+the type of panel connected to it.
+
+We use two nodes:
+ -dp-controller node
+ -dptx-phy node(defined inside dp-controller node)
+
+For the DP-PHY initialization, we use the dptx-phy node.
+Required properties for dptx-phy: deprecated, use phys and phy-names
+ -reg: deprecated
+ Base address of DP PHY register.
+ -samsung,enable-mask: deprecated
+ The bit-mask used to enable/disable DP PHY.
+
+For the Panel initialization, we read data from dp-controller node.
+Required properties for dp-controller:
+ -compatible:
+ should be "samsung,exynos5-dp".
+ -reg:
+ physical base address of the controller and length
+ of memory mapped region.
+ -interrupts:
+ interrupt combiner values.
+ -clocks:
+ from common clock binding: handle to dp clock.
+ -clock-names:
+ from common clock binding: Shall be "dp".
+ -phys:
+ from general PHY binding: the phandle for the PHY device.
+ -phy-names:
+ from general PHY binding: Should be "dp".
+
+Optional properties for dp-controller:
+ -interlaced:
+ interlace scan mode.
+ Progressive if defined, Interlaced if not defined
+ -vsync-active-high:
+ VSYNC polarity configuration.
+ High if defined, Low if not defined
+ -hsync-active-high:
+ HSYNC polarity configuration.
+ High if defined, Low if not defined
+ -samsung,hpd-gpio:
+ Hotplug detect GPIO.
+ Indicates which GPIO should be used for hotplug
+ detection
+ -video interfaces: Device node can contain video interface port
+ nodes according to [1].
+ - display-timings: timings for the connected panel as described by
+ Documentation/devicetree/bindings/display/panel/display-timing.txt
+
+For the below properties, please refer to Analogix DP binding document:
+ * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
+ -phys (required)
+ -phy-names (required)
+ -hpd-gpios (optional)
+ force-hpd (optional)
+
+Deprecated properties for DisplayPort:
+-interlaced: deprecated prop that can parsed from drm_display_mode.
+-vsync-active-high: deprecated prop that can parsed from drm_display_mode.
+-hsync-active-high: deprecated prop that can parsed from drm_display_mode.
+-samsung,ycbcr-coeff: deprecated prop that can parsed from drm_display_mode.
+-samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode.
+-samsung,color-space: deprecated prop that can parsed from drm_display_info.
+-samsung,color-depth: deprecated prop that can parsed from drm_display_info.
+-samsung,link-rate: deprecated prop that can reading from monitor by dpcd method.
+-samsung,lane-count: deprecated prop that can reading from monitor by dpcd method.
+-samsung,hpd-gpio: deprecated name for hpd-gpios.
+
+-------------------------------------------------------------------------------
+
+Example:
+
+SOC specific portion:
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b0000 0x10000>;
+ interrupts = <10 3>;
+ interrupt-parent = <&combiner>;
+ clocks = <&clock 342>;
+ clock-names = "dp";
+
+ phys = <&dp_phy>;
+ phy-names = "dp";
+ };
+
+Board Specific portion:
+ dp-controller {
+ display-timings {
+ native-mode = <&lcd_timing>;
+ lcd_timing: 1366x768 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
+ };
+ };
+
+ ports {
+ port@0 {
+ dp_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/faraday,tve200.yaml b/Bindings/display/faraday,tve200.yaml
new file mode 100644
index 0000000..e2ee777
--- /dev/null
+++ b/Bindings/display/faraday,tve200.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/faraday,tve200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday TV Encoder TVE200
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: faraday,tve200
+ - items:
+ - const: cortina,gemini-tvc
+ - const: faraday,tve200
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: PCLK
+ - const: TVE
+
+ clocks:
+ minItems: 2
+
+ resets:
+ minItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/cortina,gemini-clock.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/reset/cortina,gemini-reset.h>
+ display-controller@6a000000 {
+ compatible = "faraday,tve200";
+ reg = <0x6a000000 0x1000>;
+ interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+ resets = <&syscon GEMINI_RESET_TVC>;
+ clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+ <&syscon GEMINI_CLK_TVC>;
+ clock-names = "PCLK", "TVE";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
diff --git a/Bindings/display/fsl,dcu.txt b/Bindings/display/fsl,dcu.txt
new file mode 100644
index 0000000..63ec2a6
--- /dev/null
+++ b/Bindings/display/fsl,dcu.txt
@@ -0,0 +1,34 @@
+Device Tree bindings for Freescale DCU DRM Driver
+
+Required properties:
+- compatible: Should be one of
+ * "fsl,ls1021a-dcu".
+ * "fsl,vf610-dcu".
+
+- reg: Address and length of the register set for dcu.
+- clocks: Handle to "dcu" and "pix" clock (in the order below)
+ This can be the same clock (e.g. LS1021a)
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Should be "dcu" and "pix"
+ See ../clocks/clock-bindings.txt for details.
+- big-endian Boolean property, LS1021A DCU registers are big-endian.
+- port Video port for the panel output
+
+Optional properties:
+- fsl,tcon: The phandle to the timing controller node.
+
+Examples:
+dcu: dcu@2ce0000 {
+ compatible = "fsl,ls1021a-dcu";
+ reg = <0x0 0x2ce0000 0x0 0x10000>;
+ clocks = <&platform_clk 0>, <&platform_clk 0>;
+ clock-names = "dcu", "pix";
+ big-endian;
+ fsl,tcon = <&tcon>;
+
+ port {
+ dcu_out: endpoint {
+ remote-endpoint = <&panel_out>;
+ };
+ };
+};
diff --git a/Bindings/display/fsl,lcdif.yaml b/Bindings/display/fsl,lcdif.yaml
new file mode 100644
index 0000000..1c2be8d
--- /dev/null
+++ b/Bindings/display/fsl,lcdif.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX LCD Interface (LCDIF)
+
+maintainers:
+ - Marek Vasut <marex@denx.de>
+ - Stefan Agner <stefan@agner.ch>
+
+description: |
+ (e)LCDIF display controller found in the Freescale/NXP i.MX SoCs.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx23-lcdif
+ - fsl,imx28-lcdif
+ - fsl,imx6sx-lcdif
+ - fsl,imx8mp-lcdif
+ - fsl,imx93-lcdif
+ - items:
+ - enum:
+ - fsl,imx6sl-lcdif
+ - fsl,imx6sll-lcdif
+ - fsl,imx6ul-lcdif
+ - fsl,imx7d-lcdif
+ - fsl,imx8mm-lcdif
+ - fsl,imx8mn-lcdif
+ - fsl,imx8mq-lcdif
+ - const: fsl,imx6sx-lcdif
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Pixel clock
+ - description: Bus clock
+ - description: Display AXI clock
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: pix
+ - const: axi
+ - const: disp_axi
+ minItems: 1
+
+ interrupts:
+ items:
+ - description: LCDIF DMA interrupt
+ - description: LCDIF Error interrupt
+ minItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The LCDIF output port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+ - port
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx6sx-lcdif
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 3
+ clock-names:
+ minItems: 2
+ maxItems: 3
+ required:
+ - clock-names
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8mp-lcdif
+ - fsl,imx93-lcdif
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ clock-names:
+ minItems: 3
+ maxItems: 3
+ required:
+ - clock-names
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6sx-lcdif
+ - fsl,imx8mp-lcdif
+ - fsl,imx93-lcdif
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ maxItems: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6sl-lcdif
+ - fsl,imx6sx-lcdif
+ - fsl,imx8mm-lcdif
+ - fsl,imx8mn-lcdif
+ - fsl,imx8mp-lcdif
+ - fsl,imx93-lcdif
+ then:
+ required:
+ - power-domains
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx23-lcdif
+ then:
+ properties:
+ interrupts:
+ minItems: 2
+ maxItems: 2
+ else:
+ properties:
+ interrupts:
+ maxItems: 1
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6sx-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ display-controller@2220000 {
+ compatible = "fsl,imx6sx-lcdif";
+ reg = <0x02220000 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+ <&clks IMX6SX_CLK_LCDIF_APB>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>;
+ clock-names = "pix", "axi", "disp_axi";
+ power-domains = <&pd_disp>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/fsl,tcon.txt b/Bindings/display/fsl,tcon.txt
new file mode 100644
index 0000000..4750087
--- /dev/null
+++ b/Bindings/display/fsl,tcon.txt
@@ -0,0 +1,17 @@
+Device Tree bindings for Freescale TCON Driver
+
+Required properties:
+- compatible: Should be one of
+ * "fsl,vf610-tcon".
+
+- reg: Address and length of the register set for tcon.
+- clocks: From common clock binding: handle to tcon ipg clock.
+- clock-names: From common clock binding: Shall be "ipg".
+
+Examples:
+timing-controller@4003d000 {
+ compatible = "fsl,vf610-tcon";
+ reg = <0x4003d000 0x1000>;
+ clocks = <&clks VF610_CLK_TCON0>;
+ clock-names = "ipg";
+};
diff --git a/Bindings/display/google,goldfish-fb.txt b/Bindings/display/google,goldfish-fb.txt
new file mode 100644
index 0000000..751fa9f
--- /dev/null
+++ b/Bindings/display/google,goldfish-fb.txt
@@ -0,0 +1,17 @@
+Android Goldfish framebuffer
+
+Android Goldfish framebuffer device used by Android emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-fb"
+- reg : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+ display-controller@1f008000 {
+ compatible = "google,goldfish-fb";
+ interrupts = <0x10>;
+ reg = <0x1f008000 0x100>;
+ };
diff --git a/Bindings/display/himax,hx8357d.txt b/Bindings/display/himax,hx8357d.txt
new file mode 100644
index 0000000..e641f66
--- /dev/null
+++ b/Bindings/display/himax,hx8357d.txt
@@ -0,0 +1,26 @@
+Himax HX8357D display panels
+
+This binding is for display panels using a Himax HX8357D controller in SPI
+mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
+
+Required properties:
+- compatible: "adafruit,yx350hv15", "himax,hx8357d"
+- dc-gpios: D/C pin
+- reg: address of the panel on the SPI bus
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+ display@0{
+ compatible = "adafruit,yx350hv15", "himax,hx8357d";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ rotation = <90>;
+ backlight = <&backlight>;
+ };
diff --git a/Bindings/display/hisilicon/dw-dsi.txt b/Bindings/display/hisilicon/dw-dsi.txt
new file mode 100644
index 0000000..d270bfe
--- /dev/null
+++ b/Bindings/display/hisilicon/dw-dsi.txt
@@ -0,0 +1,72 @@
+Device-Tree bindings for DesignWare DSI Host Controller v1.20a driver
+
+A DSI Host Controller resides in the middle of display controller and external
+HDMI converter or panel.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-dsi".
+- reg: physical base address and length of dsi controller's registers.
+- clocks: contains APB clock phandle + clock-specifier pair.
+- clock-names: should be "pclk".
+- ports: contains DSI controller input and output sub port.
+ The input port connects to ADE output port with the reg value "0".
+ The output port with the reg value "1", it could connect to panel or
+ any other bridge endpoints.
+ See Documentation/devicetree/bindings/graph.txt for more device graph info.
+
+A example of HiKey board hi6220 SoC and board specific DT entry:
+Example:
+
+SoC specific:
+ dsi: dsi@f4107800 {
+ compatible = "hisilicon,hi6220-dsi";
+ reg = <0x0 0xf4107800 0x0 0x100>;
+ clocks = <&media_ctrl HI6220_DSI_PCLK>;
+ clock-names = "pclk";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 0 for input port */
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ade_out>;
+ };
+ };
+ };
+ };
+
+
+Board specific:
+ &dsi {
+ status = "ok";
+
+ ports {
+ /* 1 for output port */
+ port@1 {
+ reg = <1>;
+
+ dsi_out0: endpoint@0 {
+ remote-endpoint = <&adv7533_in>;
+ };
+ };
+ };
+ };
+
+ &i2c2 {
+ ...
+
+ adv7533: adv7533@39 {
+ ...
+
+ port {
+ adv7533_in: endpoint {
+ remote-endpoint = <&dsi_out0>;
+ };
+ };
+ };
+ };
+
diff --git a/Bindings/display/hisilicon/hisi-ade.txt b/Bindings/display/hisilicon/hisi-ade.txt
new file mode 100644
index 0000000..305a0e7
--- /dev/null
+++ b/Bindings/display/hisilicon/hisi-ade.txt
@@ -0,0 +1,64 @@
+Device-Tree bindings for hisilicon ADE display controller driver
+
+ADE (Advanced Display Engine) is the display controller which grab image
+data from memory, do composition, do post image processing, generate RGB
+timing stream and transfer to DSI.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-ade".
+- reg: physical base address and length of the ADE controller's registers.
+- hisilicon,noc-syscon: ADE NOC QoS syscon.
+- resets: The ADE reset controller node.
+- interrupt: the ldi vblank interrupt number used.
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+- clock-names: should contain:
+ "clk_ade_core" for the ADE core clock.
+ "clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with
+ jpeg codec.
+ "clk_ade_pix" for the ADE pixel clock.
+- assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks'
+ phandle + clock-specifier pairs.
+- assigned-clock-rates: clock rates, one for each entry in assigned-clocks.
+ The rate of "clk_ade_core" could be "360000000" or "180000000";
+ The rate of "clk_codec_jpeg" could be or less than "1440000000".
+ These rate values could be configured according to performance and power
+ consumption.
+- port: the output port. This contains one endpoint subnode, with its
+ remote-endpoint set to the phandle of the connected DSI input endpoint.
+ See Documentation/devicetree/bindings/graph.txt for more device graph info.
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent.
+
+
+A example of HiKey board hi6220 SoC specific DT entry:
+Example:
+
+ ade: ade@f4100000 {
+ compatible = "hisilicon,hi6220-ade";
+ reg = <0x0 0xf4100000 0x0 0x7800>;
+ reg-names = "ade_base";
+ hisilicon,noc-syscon = <&medianoc_ade>;
+ resets = <&media_ctrl MEDIA_ADE>;
+ interrupts = <0 115 4>; /* ldi interrupt */
+
+ clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>,
+ <&media_ctrl HI6220_ADE_PIX_SRC>;
+ /*clock name*/
+ clock-names = "clk_ade_core",
+ "clk_codec_jpeg",
+ "clk_ade_pix";
+
+ assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>;
+ assigned-clock-rates = <360000000>, <288000000>;
+ dma-coherent;
+
+ port {
+ ade_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
diff --git a/Bindings/display/ilitek,ili9225.txt b/Bindings/display/ilitek,ili9225.txt
new file mode 100644
index 0000000..a59feb5
--- /dev/null
+++ b/Bindings/display/ilitek,ili9225.txt
@@ -0,0 +1,25 @@
+Ilitek ILI9225 display panels
+
+This binding is for display panels using an Ilitek ILI9225 controller in SPI
+mode.
+
+Required properties:
+- compatible: "vot,v220hf01a-t", "ilitek,ili9225"
+- rs-gpios: Register select signal
+- reset-gpios: Reset pin
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+ display@0{
+ compatible = "vot,v220hf01a-t", "ilitek,ili9225";
+ reg = <0>;
+ spi-max-frequency = <12000000>;
+ rs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ rotation = <270>;
+ };
diff --git a/Bindings/display/ilitek,ili9486.yaml b/Bindings/display/ilitek,ili9486.yaml
new file mode 100644
index 0000000..9cc1fd0
--- /dev/null
+++ b/Bindings/display/ilitek,ili9486.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9486 display panels
+
+maintainers:
+ - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
+
+description:
+ This binding is for display panels using an Ilitek ILI9486 controller in SPI
+ mode.
+
+allOf:
+ - $ref: panel/panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ # Waveshare 3.5" 320x480 Color TFT LCD
+ - waveshare,rpi-lcd-35
+ # Ozzmaker 3.5" 320x480 Color TFT LCD
+ - ozzmaker,piscreen
+ - const: ilitek,ili9486
+
+ spi-max-frequency:
+ maximum: 32000000
+
+ dc-gpios:
+ maxItems: 1
+ description: Display data/command selection (D/CX)
+
+ backlight: true
+ reg: true
+ reset-gpios: true
+ rotation: true
+
+required:
+ - compatible
+ - reg
+ - dc-gpios
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+
+ display@0{
+ compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ rotation = <180>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/imx/fsl,imx-lcdc.yaml b/Bindings/display/imx/fsl,imx-lcdc.yaml
new file mode 100644
index 0000000..c2b2962
--- /dev/null
+++ b/Bindings/display/imx/fsl,imx-lcdc.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX LCD Controller, found on i.MX1, i.MX21, i.MX25 and i.MX27
+
+maintainers:
+ - Sascha Hauer <s.hauer@pengutronix.de>
+ - Pengutronix Kernel Team <kernel@pengutronix.de>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx1-fb
+ - fsl,imx21-fb
+ - items:
+ - enum:
+ - fsl,imx25-fb
+ - fsl,imx27-fb
+ - const: fsl,imx21-fb
+ - items:
+ - const: fsl,imx25-lcdc
+ - const: fsl,imx21-lcdc
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: ahb
+ - const: per
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+
+ display:
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ lcd-supply:
+ description:
+ Regulator for LCD supply voltage.
+
+ fsl,dmacr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Override value for DMA Control Register
+
+ fsl,lpccr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Contrast Control Register value.
+
+ fsl,lscr1:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ LCDC Sharp Configuration Register value.
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx1-lcdc
+ - fsl,imx21-lcdc
+ then:
+ properties:
+ display: false
+ fsl,dmacr: false
+ fsl,lpccr: false
+ fsl,lscr1: false
+
+ required:
+ - port
+
+ else:
+ properties:
+ port: false
+
+ required:
+ - display
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - interrupts
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ lcdc@53fbc000 {
+ compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc";
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <39>;
+ clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+ clock-names = "ipg", "ahb", "per";
+
+ port {
+ parallel_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ - |
+ imxfb: fb@10021000 {
+ compatible = "fsl,imx21-fb";
+ interrupts = <61>;
+ reg = <0x10021000 0x1000>;
+ display = <&display0>;
+ clocks = <&clks 103>, <&clks 49>, <&clks 66>;
+ clock-names = "ipg", "ahb", "per";
+ };
+
+ display0: display0 {
+ model = "Primeview-PD050VL1";
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xf0c88080>; /* non-standard but required */
+
+ display-timings {
+ native-mode = <&timing_disp0>;
+ timing_disp0: timing0 {
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <112>;
+ hfront-porch = <36>;
+ hsync-len = <32>;
+ vback-porch = <33>;
+ vfront-porch = <33>;
+ vsync-len = <2>;
+ clock-frequency = <25000000>;
+ };
+ };
+ };
diff --git a/Bindings/display/imx/fsl,imx6-hdmi.yaml b/Bindings/display/imx/fsl,imx6-hdmi.yaml
new file mode 100644
index 0000000..7979cf0
--- /dev/null
+++ b/Bindings/display/imx/fsl,imx6-hdmi.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 DWC HDMI TX Encoder
+
+maintainers:
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+ with a companion PHY IP.
+
+allOf:
+ - $ref: ../bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6dl-hdmi
+ - fsl,imx6q-hdmi
+
+ reg-io-width:
+ const: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ maxItems: 2
+
+ ddc-i2c-bus:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The HDMI DDC bus can be connected to either a system I2C master or the
+ functionally-reduced I2C master contained in the DWC HDMI. When connected
+ to a system I2C master this property contains a phandle to that I2C
+ master controller.
+
+ gpr:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the iomuxc-gpr region containing the HDMI multiplexer control
+ register.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ This device has four video ports, corresponding to the four inputs of the
+ HDMI multiplexer. Each port shall have a single endpoint.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: First input of the HDMI multiplexer
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Second input of the HDMI multiplexer
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Third input of the HDMI multiplexer
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Fourth input of the HDMI multiplexer
+
+ anyOf:
+ - required:
+ - port@0
+ - required:
+ - port@1
+ - required:
+ - port@2
+ - required:
+ - port@3
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - gpr
+ - interrupts
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+
+ hdmi: hdmi@120000 {
+ reg = <0x00120000 0x9000>;
+ interrupts = <0 115 0x04>;
+ gpr = <&gpr>;
+ clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
+ <&clks IMX6QDL_CLK_HDMI_ISFR>;
+ clock-names = "iahb", "isfr";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_hdmi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_hdmi>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/imx/fsl-imx-drm.txt b/Bindings/display/imx/fsl-imx-drm.txt
new file mode 100644
index 0000000..3c35338
--- /dev/null
+++ b/Bindings/display/imx/fsl-imx-drm.txt
@@ -0,0 +1,162 @@
+Freescale i.MX DRM master device
+================================
+
+The freescale i.MX DRM master device is a virtual device needed to list all
+IPU or other display interface nodes that comprise the graphics subsystem.
+
+Required properties:
+- compatible: Should be "fsl,imx-display-subsystem"
+- ports: Should contain a list of phandles pointing to display interface ports
+ of IPU devices
+
+example:
+
+display-subsystem {
+ compatible = "fsl,imx-display-subsystem";
+ ports = <&ipu_di0>;
+};
+
+
+Freescale i.MX IPUv3
+====================
+
+Required properties:
+- compatible: Should be "fsl,<chip>-ipu" where <chip> is one of
+ - imx51
+ - imx53
+ - imx6q
+ - imx6qp
+- reg: should be register base and length as documented in the
+ datasheet
+- interrupts: Should contain sync interrupt and error interrupt,
+ in this order.
+- resets: phandle pointing to the system reset controller and
+ reset line index, see reset/fsl,imx-src.txt for details
+Additional required properties for fsl,imx6qp-ipu:
+- fsl,prg: phandle to prg node associated with this IPU instance
+Optional properties:
+- port@[0-3]: Port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Ports 0 and 1 should correspond to CSI0 and CSI1,
+ ports 2 and 3 should correspond to DI0 and DI1, respectively.
+
+example:
+
+ipu: ipu@18000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ipu";
+ reg = <0x18000000 0x080000000>;
+ interrupts = <11 10>;
+ resets = <&src 2>;
+
+ ipu_di0: port@2 {
+ reg = <2>;
+
+ ipu_di0_disp0: endpoint {
+ remote-endpoint = <&display_in>;
+ };
+ };
+};
+
+Freescale i.MX PRE (Prefetch Resolve Engine)
+============================================
+
+Required properties:
+- compatible: should be "fsl,imx6qp-pre"
+- reg: should be register base and length as documented in the
+ datasheet
+- clocks : phandle to the PRE axi clock input, as described
+ in Documentation/devicetree/bindings/clock/clock-bindings.txt and
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
+- clock-names: should be "axi"
+- interrupts: should contain the PRE interrupt
+- fsl,iram: phandle pointing to the mmio-sram device node, that should be
+ used for the PRE SRAM double buffer.
+
+example:
+
+pre@21c8000 {
+ compatible = "fsl,imx6qp-pre";
+ reg = <0x021c8000 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clks IMX6QDL_CLK_PRE0>;
+ clock-names = "axi";
+ fsl,iram = <&ocram2>;
+};
+
+Freescale i.MX PRG (Prefetch Resolve Gasket)
+============================================
+
+Required properties:
+- compatible: should be "fsl,imx6qp-prg"
+- reg: should be register base and length as documented in the
+ datasheet
+- clocks : phandles to the PRG ipg and axi clock inputs, as described
+ in Documentation/devicetree/bindings/clock/clock-bindings.txt and
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
+- clock-names: should be "ipg" and "axi"
+- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
+ PRE as the first entry and the muxable PREs following.
+
+example:
+
+prg@21cc000 {
+ compatible = "fsl,imx6qp-prg";
+ reg = <0x021cc000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
+ <&clks IMX6QDL_CLK_PRG0_AXI>;
+ clock-names = "ipg", "axi";
+ fsl,pres = <&pre1>, <&pre2>, <&pre3>;
+};
+
+Parallel display support
+========================
+
+Required properties:
+- compatible: Should be "fsl,imx-parallel-display"
+Optional properties:
+- interface-pix-fmt: How this display is connected to the
+ display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
+ and "lvds666".
+- edid: verbatim EDID data block describing attached display.
+- ddc: phandle describing the i2c bus handling the display data
+ channel
+- port@[0-1]: Port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Port 0 is the input port connected to the IPU display interface,
+ port 1 is the output port connected to a panel.
+
+example:
+
+disp0 {
+ compatible = "fsl,imx-parallel-display";
+ edid = [edid-data];
+ interface-pix-fmt = "rgb24";
+
+ port@0 {
+ reg = <0>;
+
+ display_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+panel {
+ ...
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+};
diff --git a/Bindings/display/imx/ldb.txt b/Bindings/display/imx/ldb.txt
new file mode 100644
index 0000000..8e6e7d7
--- /dev/null
+++ b/Bindings/display/imx/ldb.txt
@@ -0,0 +1,147 @@
+Device-Tree bindings for LVDS Display Bridge (ldb)
+
+LVDS Display Bridge
+===================
+
+The LVDS Display Bridge device tree node contains up to two lvds-channel
+nodes describing each of the two LVDS encoder channels of the bridge.
+
+Required properties:
+ - #address-cells : should be <1>
+ - #size-cells : should be <0>
+ - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
+ Both LDB versions are similar, but i.MX6 has an additional
+ multiplexer in the front to select any of the four IPU display
+ interfaces as input for each LVDS channel.
+ - gpr : should be <&gpr> on i.MX53 and i.MX6q.
+ The phandle points to the iomuxc-gpr region containing the LVDS
+ control register.
+- clocks, clock-names : phandles to the LDB divider and selector clocks and to
+ the display interface selector clocks, as described in
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+ The following clocks are expected on i.MX53:
+ "di0_pll" - LDB LVDS channel 0 mux
+ "di1_pll" - LDB LVDS channel 1 mux
+ "di0" - LDB LVDS channel 0 gate
+ "di1" - LDB LVDS channel 1 gate
+ "di0_sel" - IPU1 DI0 mux
+ "di1_sel" - IPU1 DI1 mux
+ On i.MX6q the following additional clocks are needed:
+ "di2_sel" - IPU2 DI0 mux
+ "di3_sel" - IPU2 DI1 mux
+ The needed clock numbers for each are documented in
+ Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
+
+Optional properties:
+ - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
+ - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53,
+ not used on i.MX6q
+ - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should
+ be configured - one input will be distributed on both outputs in dual
+ channel mode
+
+LVDS Channel
+============
+
+Each LVDS Channel has to contain either an of graph link to a panel device node
+or a display-timings node that describes the video timings for the connected
+LVDS display as well as the fsl,data-mapping and fsl,data-width properties.
+
+Required properties:
+ - reg : should be <0> or <1>
+ - port: Input and output port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/graph.txt.
+ On i.MX5, the internal two-input-multiplexer is used. Due to hardware
+ limitations, only one input port (port@[0,1]) can be used for each channel
+ (lvds-channel@[0,1], respectively).
+ On i.MX6, there should be four input ports (port@[0-3]) that correspond
+ to the four LVDS multiplexer inputs.
+ A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected
+ to a panel input port. Optionally, the output port can be left out if
+ display-timings are used instead.
+
+Optional properties (required if display-timings are used):
+ - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+ - display-timings : A node that describes the display timings as defined in
+ Documentation/devicetree/bindings/display/panel/display-timing.txt.
+ - fsl,data-mapping : should be "spwg" or "jeida"
+ This describes how the color bits are laid out in the
+ serialized LVDS signal.
+ - fsl,data-width : should be <18> or <24>
+
+example:
+
+gpr: iomuxc-gpr@53fa8000 {
+ /* ... */
+};
+
+ldb: ldb@53fa8008 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ldb";
+ gpr = <&gpr>;
+ clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+ <&clks IMX5_CLK_LDB_DI1_SEL>,
+ <&clks IMX5_CLK_IPU_DI0_SEL>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>,
+ <&clks IMX5_CLK_LDB_DI0_GATE>,
+ <&clks IMX5_CLK_LDB_DI1_GATE>;
+ clock-names = "di0_pll", "di1_pll",
+ "di0_sel", "di1_sel",
+ "di0", "di1";
+
+ /* Using an of-graph endpoint link to connect the panel */
+ lvds-channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds0_in: endpoint {
+ remote-endpoint = <&ipu_di0_lvds0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ /* Using display-timings and fsl,data-mapping/width instead */
+ lvds-channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+
+ display-timings {
+ /* ... */
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds1_in: endpoint {
+ remote-endpoint = <&ipu_di1_lvds1>;
+ };
+ };
+ };
+};
+
+panel: lvds-panel {
+ /* ... */
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+};
diff --git a/Bindings/display/imx/nxp,imx8mq-dcss.yaml b/Bindings/display/imx/nxp,imx8mq-dcss.yaml
new file mode 100644
index 0000000..4ae6328
--- /dev/null
+++ b/Bindings/display/imx/nxp,imx8mq-dcss.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: iMX8MQ Display Controller Subsystem (DCSS)
+
+maintainers:
+ - Laurentiu Palcu <laurentiu.palcu@nxp.com>
+
+description:
+
+ The DCSS (display controller sub system) is used to source up to three
+ display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP
+ 2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10
+ image processing capabilities are included to provide a solution capable of
+ driving next generation high dynamic range displays.
+
+properties:
+ compatible:
+ const: nxp,imx8mq-dcss
+
+ reg:
+ items:
+ - description: DCSS base address and size, up to IRQ steer start
+ - description: DCSS BLKCTL base address and size
+
+ interrupts:
+ items:
+ - description: Context loader completion and error interrupt
+ - description: DTG interrupt used to signal context loader trigger time
+ - description: DTG interrupt for Vblank
+
+ interrupt-names:
+ items:
+ - const: ctxld
+ - const: ctxld_kick
+ - const: vblank
+
+ clocks:
+ items:
+ - description: Display APB clock for all peripheral PIO access interfaces
+ - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL
+ - description: RTRAM clock
+ - description: Pixel clock, can be driven either by HDMI phy clock or MIPI
+ - description: DTRC clock, needed by video decompressor
+
+ clock-names:
+ items:
+ - const: apb
+ - const: axi
+ - const: rtrm
+ - const: pix
+ - const: dtrc
+
+ assigned-clocks:
+ items:
+ - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT
+ - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM
+ - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or
+ IMX8MQ_VIDEO_PLL1_REF_SEL
+
+ assigned-clock-parents:
+ items:
+ - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
+ - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
+ - description: Phandle and clock specifier of IMX8MQ_CLK_27M
+
+ assigned-clock-rates:
+ items:
+ - description: Must be 800 MHz
+ - description: Must be 400 MHz
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A port node pointing to the input port of a HDMI/DP or MIPI display bridge.
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mq-clock.h>
+ dcss: display-controller@32e00000 {
+ compatible = "nxp,imx8mq-dcss";
+ reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>;
+ interrupts = <6>, <8>, <9>;
+ interrupt-names = "ctxld", "ctxld_kick", "vblank";
+ interrupt-parent = <&irqsteer>;
+ clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>,
+ <&clk IMX8MQ_CLK_DISP_DTRC>;
+ clock-names = "apb", "axi", "rtrm", "pix", "dtrc";
+ assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>,
+ <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>,
+ <&clk IMX8MQ_CLK_27M>;
+ assigned-clock-rates = <800000000>,
+ <400000000>;
+ port {
+ dcss_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
diff --git a/Bindings/display/ingenic,ipu.yaml b/Bindings/display/ingenic,ipu.yaml
new file mode 100644
index 0000000..319bd7c
--- /dev/null
+++ b/Bindings/display/ingenic,ipu.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ingenic,ipu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs Image Processing Unit (IPU)
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4725b-ipu
+ - ingenic,jz4760-ipu
+ - items:
+ - const: ingenic,jz4770-ipu
+ - const: ingenic,jz4760-ipu
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: ipu
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
+ ipu@13080000 {
+ compatible = "ingenic,jz4770-ipu", "ingenic,jz4760-ipu";
+ reg = <0x13080000 0x800>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <29>;
+
+ clocks = <&cgu JZ4770_CLK_IPU>;
+ clock-names = "ipu";
+
+ port {
+ ipu_ep: endpoint {
+ remote-endpoint = <&lcdc_ep>;
+ };
+ };
+ };
diff --git a/Bindings/display/ingenic,lcd.yaml b/Bindings/display/ingenic,lcd.yaml
new file mode 100644
index 0000000..6d4c00f
--- /dev/null
+++ b/Bindings/display/ingenic,lcd.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ingenic,lcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs LCD controller
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+ $nodename:
+ pattern: "^lcd-controller@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - ingenic,jz4740-lcd
+ - ingenic,jz4725b-lcd
+ - ingenic,jz4760-lcd
+ - ingenic,jz4760b-lcd
+ - ingenic,jz4770-lcd
+ - ingenic,jz4780-lcd
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Pixel clock
+ - description: Module clock
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: lcd_pclk
+ - const: lcd
+ minItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPI output, to interface with TFT panels.
+
+ port@8:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Link to the Image Processing Unit (IPU).
+ (See ingenic,ipu.yaml).
+
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ingenic,jz4740-lcd
+ - ingenic,jz4780-lcd
+then:
+ properties:
+ clocks:
+ minItems: 2
+ clock-names:
+ minItems: 2
+else:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ maxItems: 1
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
+ lcd-controller@13050000 {
+ compatible = "ingenic,jz4740-lcd";
+ reg = <0x13050000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
+
+ clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>;
+ clock-names = "lcd_pclk", "lcd";
+
+ port {
+ endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/clock/ingenic,jz4725b-cgu.h>
+ lcd-controller@13050000 {
+ compatible = "ingenic,jz4725b-lcd";
+ reg = <0x13050000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ clocks = <&cgu JZ4725B_CLK_LCD>;
+ clock-names = "lcd_pclk";
+
+ port {
+ endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
diff --git a/Bindings/display/intel,keembay-display.yaml b/Bindings/display/intel,keembay-display.yaml
new file mode 100644
index 0000000..2cf54ec
--- /dev/null
+++ b/Bindings/display/intel,keembay-display.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/intel,keembay-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay display controller
+
+maintainers:
+ - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
+ - Edmond J Dea <edmund.j.dea@intel.com>
+
+properties:
+ compatible:
+ const: intel,keembay-display
+
+ reg:
+ items:
+ - description: LCD registers range
+
+ reg-names:
+ items:
+ - const: lcd
+
+ clocks:
+ items:
+ - description: LCD controller clock
+ - description: pll0 clock
+
+ clock-names:
+ items:
+ - const: clk_lcd
+ - const: clk_pll0
+
+ interrupts:
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Display output node to DSI.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ display@20930000 {
+ compatible = "intel,keembay-display";
+ reg = <0x20930000 0x3000>;
+ reg-names = "lcd";
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk 0x83>,
+ <&scmi_clk 0x0>;
+ clock-names = "clk_lcd", "clk_pll0";
+
+ port {
+ disp_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
diff --git a/Bindings/display/intel,keembay-msscam.yaml b/Bindings/display/intel,keembay-msscam.yaml
new file mode 100644
index 0000000..cc7e1f3
--- /dev/null
+++ b/Bindings/display/intel,keembay-msscam.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/intel,keembay-msscam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay MSSCAM
+
+maintainers:
+ - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
+ - Edmond J Dea <edmund.j.dea@intel.com>
+
+description: |
+ MSSCAM controls local clocks in the display subsystem namely LCD clocks and
+ MIPI DSI clocks. It also configures the interconnect between LCD and
+ MIPI DSI.
+
+properties:
+ compatible:
+ items:
+ - const: intel,keembay-msscam
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ reg-io-width:
+ const: 4
+
+required:
+ - compatible
+ - reg
+ - reg-io-width
+
+additionalProperties: false
+
+examples:
+ - |
+ msscam:msscam@20910000 {
+ compatible = "intel,keembay-msscam", "syscon";
+ reg = <0x20910000 0x30>;
+ reg-io-width = <4>;
+ };
diff --git a/Bindings/display/lvds-data-mapping.yaml b/Bindings/display/lvds-data-mapping.yaml
new file mode 100644
index 0000000..d68982f
--- /dev/null
+++ b/Bindings/display/lvds-data-mapping.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/lvds-data-mapping.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LVDS Data Mapping
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+ LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
+ incompatible data link layers have been used over time to transmit image data
+ to LVDS devices. This bindings supports devices compatible with the following
+ specifications.
+
+ [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
+ 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
+ [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
+ Semiconductor
+ [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
+ Electronics Standards Association (VESA)
+
+ Device compatible with those specifications have been marketed under the
+ FPD-Link and FlatLink brands.
+
+properties:
+ data-mapping:
+ enum:
+ - jeida-18
+ - jeida-24
+ - vesa-24
+ description: |
+ The color signals mapping order.
+
+ LVDS data mappings are defined as follows.
+
+ - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
+ [VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
+
+ Slot 0 1 2 3 4 5 6
+ ________________ _________________
+ Clock \_______________________/
+ ______ ______ ______ ______ ______ ______ ______
+ DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+ DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+ DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+
+ - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
+ specifications. Data are transferred as follows on 4 LVDS lanes.
+
+ Slot 0 1 2 3 4 5 6
+ ________________ _________________
+ Clock \_______________________/
+ ______ ______ ______ ______ ______ ______ ______
+ DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
+ DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
+ DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
+ DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
+
+ - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
+ Data are transferred as follows on 4 LVDS lanes.
+
+ Slot 0 1 2 3 4 5 6
+ ________________ _________________
+ Clock \_______________________/
+ ______ ______ ______ ______ ______ ______ ______
+ DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+ DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+ DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+ DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
+
+ Control signals are mapped as follows.
+
+ CTL0: HSync
+ CTL1: VSync
+ CTL2: Data Enable
+ CTL3: 0
+
+additionalProperties: true
+
+...
diff --git a/Bindings/display/lvds.yaml b/Bindings/display/lvds.yaml
new file mode 100644
index 0000000..224db49
--- /dev/null
+++ b/Bindings/display/lvds.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LVDS Display Common Properties
+
+allOf:
+ - $ref: lvds-data-mapping.yaml#
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description:
+ This binding extends the data mapping defined in lvds-data-mapping.yaml.
+ It supports reversing the bit order on the formats defined there in order
+ to accomodate for even more specialized data formats, since a variety of
+ data formats and layouts is used to drive LVDS displays.
+
+properties:
+ data-mirror:
+ type: boolean
+ description:
+ If set, reverse the bit order described in the data mappings on all
+ data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
+
+additionalProperties: true
+
+...
diff --git a/Bindings/display/marvell,pxa2xx-lcdc.txt b/Bindings/display/marvell,pxa2xx-lcdc.txt
new file mode 100644
index 0000000..45ffd6c
--- /dev/null
+++ b/Bindings/display/marvell,pxa2xx-lcdc.txt
@@ -0,0 +1,36 @@
+PXA LCD Controller
+------------------
+
+Required properties:
+ - compatible : one of these
+ "marvell,pxa2xx-lcdc",
+ "marvell,pxa270-lcdc",
+ "marvell,pxa300-lcdc"
+ - reg : should contain 1 register range (address and length).
+ - interrupts : framebuffer controller interrupt.
+ - clocks: phandle to input clocks
+
+Optional properties:
+ - lcd-supply: A phandle to a power regulator that controls the LCD voltage.
+
+Required nodes:
+ - port: connection to the LCD panel (see video-interfaces.txt)
+ This node must have its properties bus-width and remote-endpoint set.
+ If the panel is not a TFT color panel, then a "lcd-type" property in
+ the panel should specify the panel type.
+ This panel node should be in the board dts.
+
+Example:
+ lcd-controller@40500000 {
+ compatible = "marvell,pxa2xx-lcdc";
+ reg = <0x44000000 0x10000>;
+ interrupts = <17>;
+ clocks = <&clks CLK_LCD>;
+
+ port {
+ lcdc_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ bus-width = <16>;
+ };
+ };
+ };
diff --git a/Bindings/display/marvell,pxa300-gcu.txt b/Bindings/display/marvell,pxa300-gcu.txt
new file mode 100644
index 0000000..9cfae5c
--- /dev/null
+++ b/Bindings/display/marvell,pxa300-gcu.txt
@@ -0,0 +1,17 @@
+PXA3xx GCU Controller
+---------------------
+
+Required properties:
+ - compatible : "marvell,pxa300-gcu"
+ - reg : should contain the register range (address and length).
+ - interrupts : Controller interrupt.
+ - clocks: phandle to the PXA specific input clock.
+
+Example for PXA300:
+
+ display-controller@54000000 {
+ compatible = "marvell,pxa300-gcu";
+ reg = <0x54000000 0x1000>;
+ interrupts = <39>;
+ clocks = <&clks CLK_PXA300_GCU>;
+ };
diff --git a/Bindings/display/mediatek/mediatek,aal.yaml b/Bindings/display/mediatek/mediatek,aal.yaml
new file mode 100644
index 0000000..7fd42c8
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,aal.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,aal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display adaptive ambient light processor
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display adaptive ambient light processor, namely AAL,
+ is responsible for backlight power saving and sunlight visibility improving.
+ AAL device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8173-disp-aal
+ - mediatek,mt8183-disp-aal
+ - items:
+ - enum:
+ - mediatek,mt2712-disp-aal
+ - mediatek,mt6795-disp-aal
+ - const: mediatek,mt8173-disp-aal
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-aal
+ - mediatek,mt8188-disp-aal
+ - mediatek,mt8192-disp-aal
+ - mediatek,mt8195-disp-aal
+ - const: mediatek,mt8183-disp-aal
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: AAL Clock
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aal@14015000 {
+ compatible = "mediatek,mt8173-disp-aal";
+ reg = <0 0x14015000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_AAL>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,ccorr.yaml b/Bindings/display/mediatek/mediatek,ccorr.yaml
new file mode 100644
index 0000000..8c2a737
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,ccorr.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color correction
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display color correction, namely CCORR, reproduces correct color
+ on panels with different color gamut.
+ CCORR device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8183-disp-ccorr
+ - mediatek,mt8192-disp-ccorr
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-ccorr
+ - mediatek,mt8188-disp-ccorr
+ - mediatek,mt8195-disp-ccorr
+ - const: mediatek,mt8192-disp-ccorr
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: CCORR Clock
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8183-clk.h>
+ #include <dt-bindings/power/mt8183-power.h>
+ #include <dt-bindings/gce/mt8183-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ccorr0: ccorr@1400f000 {
+ compatible = "mediatek,mt8183-disp-ccorr";
+ reg = <0 0x1400f000 0 0x1000>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,cec.yaml b/Bindings/display/mediatek/mediatek,cec.yaml
new file mode 100644
index 0000000..080cf32
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,cec.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek HDMI CEC Controller
+
+maintainers:
+ - CK Hu <ck.hu@mediatek.com>
+ - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+ The HDMI CEC controller handles hotplug detection and CEC communication.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt7623-cec
+ - mediatek,mt8167-cec
+ - mediatek,mt8173-cec
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ cec: cec@10013000 {
+ compatible = "mediatek,mt8173-cec";
+ reg = <0x10013000 0xbc>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_CEC>;
+ };
+
+...
diff --git a/Bindings/display/mediatek/mediatek,color.yaml b/Bindings/display/mediatek/mediatek,color.yaml
new file mode 100644
index 0000000..f21e440
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,color.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,color.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color processor
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display color processor, namely COLOR, provides hue, luma and
+ saturation adjustments to get better picture quality and to have one panel
+ resemble the other in their output characteristics.
+ COLOR device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-disp-color
+ - mediatek,mt8167-disp-color
+ - mediatek,mt8173-disp-color
+ - items:
+ - enum:
+ - mediatek,mt7623-disp-color
+ - mediatek,mt2712-disp-color
+ - const: mediatek,mt2701-disp-color
+ - items:
+ - enum:
+ - mediatek,mt6795-disp-color
+ - mediatek,mt8183-disp-color
+ - mediatek,mt8186-disp-color
+ - mediatek,mt8188-disp-color
+ - mediatek,mt8192-disp-color
+ - mediatek,mt8195-disp-color
+ - const: mediatek,mt8173-disp-color
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: COLOR Clock
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ color0: color@14013000 {
+ compatible = "mediatek,mt8173-disp-color";
+ reg = <0 0x14013000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,dither.yaml b/Bindings/display/mediatek/mediatek,dither.yaml
new file mode 100644
index 0000000..1588b3f
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,dither.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dither.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display dither processor
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display dither processor, namely DITHER, works by approximating
+ unavailable colors with available colors and by mixing and matching available
+ colors to mimic unavailable ones.
+ DITHER device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8183-disp-dither
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-dither
+ - mediatek,mt8188-disp-dither
+ - mediatek,mt8192-disp-dither
+ - mediatek,mt8195-disp-dither
+ - const: mediatek,mt8183-disp-dither
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: DITHER Clock
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8183-clk.h>
+ #include <dt-bindings/power/mt8183-power.h>
+ #include <dt-bindings/gce/mt8183-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ dither0: dither@14012000 {
+ compatible = "mediatek,mt8183-disp-dither";
+ reg = <0 0x14012000 0 0x1000>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,dp.yaml b/Bindings/display/mediatek/mediatek,dp.yaml
new file mode 100644
index 0000000..2aef1eb
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,dp.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Port Controller
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+ MediaTek DP and eDP are different hardwares and there are some features
+ which are not supported for eDP. For example, audio is not supported for
+ eDP. Therefore, we need to use two different compatibles to describe them.
+ In addition, We just need to enable the power domain of DP, so the clock
+ of DP is generated by itself and we are not using other PLL to generate
+ clocks.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8188-dp-tx
+ - mediatek,mt8188-edp-tx
+ - mediatek,mt8195-dp-tx
+ - mediatek,mt8195-edp-tx
+
+ reg:
+ maxItems: 1
+
+ nvmem-cells:
+ maxItems: 1
+ description: efuse data for display port calibration
+
+ nvmem-cell-names:
+ const: dp_calibration_data
+
+ power-domains:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input endpoint of the controller, usually dp_intf
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Output endpoint of the controller
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ properties:
+ data-lanes:
+ description: |
+ number of lanes supported by the hardware.
+ The possible values:
+ 0 - For 1 lane enabled in IP.
+ 0 1 - For 2 lanes enabled in IP.
+ 0 1 2 3 - For 4 lanes enabled in IP.
+ minItems: 1
+ maxItems: 4
+ required:
+ - data-lanes
+
+ required:
+ - port@0
+ - port@1
+
+ max-linkrate-mhz:
+ enum: [ 1620, 2700, 5400, 8100 ]
+ description: maximum link rate supported by the hardware.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - ports
+ - max-linkrate-mhz
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/mt8195-power.h>
+ dptx@1c600000 {
+ compatible = "mediatek,mt8195-dp-tx";
+ reg = <0x1c600000 0x8000>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+ interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+ max-linkrate-mhz = <8100>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dptx_in: endpoint {
+ remote-endpoint = <&dp_intf0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ dptx_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,dpi.yaml b/Bindings/display/mediatek/mediatek,dpi.yaml
new file mode 100644
index 0000000..803c00f
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,dpi.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DPI and DP_INTF Controller
+
+maintainers:
+ - CK Hu <ck.hu@mediatek.com>
+ - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+ The MediaTek DPI and DP_INTF function blocks are a sink of the display
+ subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
+ parallel output bus.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-dpi
+ - mediatek,mt7623-dpi
+ - mediatek,mt8173-dpi
+ - mediatek,mt8183-dpi
+ - mediatek,mt8186-dpi
+ - mediatek,mt8188-dp-intf
+ - mediatek,mt8192-dpi
+ - mediatek,mt8195-dp-intf
+ - items:
+ - enum:
+ - mediatek,mt6795-dpi
+ - const: mediatek,mt8183-dpi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Pixel Clock
+ - description: Engine Clock
+ - description: DPI PLL
+
+ clock-names:
+ items:
+ - const: pixel
+ - const: engine
+ - const: pll
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ items:
+ - const: default
+ - const: sleep
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port node. This port should be connected to the input port of an
+ attached HDMI, LVDS or DisplayPort encoder chip.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+
+ dpi0: dpi@1401d000 {
+ compatible = "mediatek,mt8173-dpi";
+ reg = <0x1401d000 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_DPI_PIXEL>,
+ <&mmsys CLK_MM_DPI_ENGINE>,
+ <&apmixedsys CLK_APMIXED_TVDPLL>;
+ clock-names = "pixel", "engine", "pll";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dpi_pin_func>;
+ pinctrl-1 = <&dpi_pin_idle>;
+
+ port {
+ dpi0_out: endpoint {
+ remote-endpoint = <&hdmi0_in>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/mediatek/mediatek,dsc.yaml b/Bindings/display/mediatek/mediatek,dsc.yaml
new file mode 100644
index 0000000..2cbdd9e
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,dsc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: mediatek display DSC controller
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ The DSC standard is a specification of the algorithms used for
+ compressing and decompressing image display streams, including
+ the specification of the syntax and semantics of the compressed
+ video bit stream. DSC is designed for real-time systems with
+ real-time compression, transmission, decompression and Display.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8195-disp-dsc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: DSC Wrapper Clock
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ mediatek,gce-client-reg:
+ description:
+ The register of client driver can be configured by gce with 4 arguments
+ defined in this property, such as phandle of gce, subsys id,
+ register offset and size.
+ Each subsys id is mapping to a base address of display function blocks
+ register which is defined in the gce header
+ include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8195-clk.h>
+ #include <dt-bindings/power/mt8195-power.h>
+ #include <dt-bindings/gce/mt8195-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ dsc0: disp_dsc_wrap@1c009000 {
+ compatible = "mediatek,mt8195-disp-dsc";
+ reg = <0 0x1c009000 0 0x1000>;
+ interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+ clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+ mediatek,gce-client-reg = <&gce1 SUBSYS_1c00XXXX 0x9000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,dsi.yaml b/Bindings/display/mediatek/mediatek,dsi.yaml
new file mode 100644
index 0000000..ed24b61
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,dsi.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DSI Controller
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+ - Jitao Shi <jitao.shi@mediatek.com>
+
+description: |
+ The MediaTek DSI function block is a sink of the display subsystem and can
+ drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
+ channel output.
+
+allOf:
+ - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-dsi
+ - mediatek,mt7623-dsi
+ - mediatek,mt8167-dsi
+ - mediatek,mt8173-dsi
+ - mediatek,mt8183-dsi
+ - mediatek,mt8186-dsi
+ - mediatek,mt8188-dsi
+ - items:
+ - enum:
+ - mediatek,mt6795-dsi
+ - const: mediatek,mt8173-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Engine Clock
+ - description: Digital Clock
+ - description: HS Clock
+
+ clock-names:
+ items:
+ - const: engine
+ - const: digital
+ - const: hs
+
+ resets:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: dphy
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output port node. This port should be connected to the input
+ port of an attached DSI panel or DSI-to-eDP encoder chip.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8183-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/mt8183-power.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/reset/mt8183-resets.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ dsi0: dsi@14014000 {
+ compatible = "mediatek,mt8183-dsi";
+ reg = <0 0x14014000 0 0x1000>;
+ interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DSI0_MM>,
+ <&mmsys CLK_MM_DSI0_IF>,
+ <&mipi_tx0>;
+ clock-names = "engine", "digital", "hs";
+ resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
+ phys = <&mipi_tx0>;
+ phy-names = "dphy";
+ port {
+ dsi0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/mediatek/mediatek,ethdr.yaml b/Bindings/display/mediatek/mediatek,ethdr.yaml
new file mode 100644
index 0000000..801fa66
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,ethdr.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ethdr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Ethdr Device
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+ ETHDR (ET High Dynamic Range) is a MediaTek internal HDR engine and is
+ designed for HDR video and graphics conversion in the external display path.
+ It handles multiple HDR input types and performs tone mapping, color
+ space/color format conversion, and then combine different layers,
+ output the required HDR or SDR signal to the subsequent display path.
+ This engine is composed of two video frontends, two graphic frontends,
+ one video backend and a mixer. ETHDR has two DMA function blocks, DS and ADL.
+ These two function blocks read the pre-programmed registers from DRAM and
+ set them to HW in the v-blanking period.
+
+properties:
+ compatible:
+ const: mediatek,mt8195-disp-ethdr
+
+ reg:
+ maxItems: 7
+
+ reg-names:
+ items:
+ - const: mixer
+ - const: vdo_fe0
+ - const: vdo_fe1
+ - const: gfx_fe0
+ - const: gfx_fe1
+ - const: vdo_be
+ - const: adl_ds
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ clocks:
+ items:
+ - description: mixer clock
+ - description: video frontend 0 clock
+ - description: video frontend 1 clock
+ - description: graphic frontend 0 clock
+ - description: graphic frontend 1 clock
+ - description: video backend clock
+ - description: autodownload and menuload clock
+ - description: video frontend 0 async clock
+ - description: video frontend 1 async clock
+ - description: graphic frontend 0 async clock
+ - description: graphic frontend 1 async clock
+ - description: video backend async clock
+ - description: ethdr top clock
+
+ clock-names:
+ items:
+ - const: mixer
+ - const: vdo_fe0
+ - const: vdo_fe1
+ - const: gfx_fe0
+ - const: gfx_fe1
+ - const: vdo_be
+ - const: adl_ds
+ - const: vdo_fe0_async
+ - const: vdo_fe1_async
+ - const: gfx_fe0_async
+ - const: gfx_fe1_async
+ - const: vdo_be_async
+ - const: ethdr_top
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: video frontend 0 async reset
+ - description: video frontend 1 async reset
+ - description: graphic frontend 0 async reset
+ - description: graphic frontend 1 async reset
+ - description: video backend async reset
+
+ reset-names:
+ items:
+ - const: vdo_fe0_async
+ - const: vdo_fe1_async
+ - const: gfx_fe0_async
+ - const: gfx_fe1_async
+ - const: vdo_be_async
+
+ mediatek,gce-client-reg:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ maxItems: 7
+ description: The register of display function block to be set by gce.
+ There are 4 arguments in this property, gce node, subsys id, offset and
+ register size. The subsys id is defined in the gce header of each chips
+ include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display
+ function block.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - power-domains
+ - resets
+ - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8195-clk.h>
+ #include <dt-bindings/gce/mt8195-gce.h>
+ #include <dt-bindings/memory/mt8195-memory-port.h>
+ #include <dt-bindings/power/mt8195-power.h>
+ #include <dt-bindings/reset/mt8195-resets.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ hdr-engine@1c114000 {
+ compatible = "mediatek,mt8195-disp-ethdr";
+ reg = <0 0x1c114000 0 0x1000>,
+ <0 0x1c115000 0 0x1000>,
+ <0 0x1c117000 0 0x1000>,
+ <0 0x1c119000 0 0x1000>,
+ <0 0x1c11a000 0 0x1000>,
+ <0 0x1c11b000 0 0x1000>,
+ <0 0x1c11c000 0 0x1000>;
+ reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+ "vdo_be", "adl_ds";
+ mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+ <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+ <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+ <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+ <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+ <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+ <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+ clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+ <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+ <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+ <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+ <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+ <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+ <&vdosys1 CLK_VDO1_26M_SLOW>,
+ <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+ <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+ <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+ <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+ <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+ <&topckgen CLK_TOP_ETHDR>;
+ clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+ "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+ "gfx_fe0_async", "gfx_fe1_async","vdo_be_async",
+ "ethdr_top";
+ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+ iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
+ <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
+ interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */
+ resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
+ <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
+ <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
+ <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
+ <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
+ reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async",
+ "gfx_fe1_async", "vdo_be_async";
+ };
+ };
+...
diff --git a/Bindings/display/mediatek/mediatek,gamma.yaml b/Bindings/display/mediatek/mediatek,gamma.yaml
new file mode 100644
index 0000000..c6641ac
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,gamma.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,gamma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display gamma correction
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display gamma correction, namely GAMMA, provides a nonlinear
+ operation used to adjust luminance in display system.
+ GAMMA device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8173-disp-gamma
+ - mediatek,mt8183-disp-gamma
+ - items:
+ - enum:
+ - mediatek,mt6795-disp-gamma
+ - const: mediatek,mt8173-disp-gamma
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-gamma
+ - mediatek,mt8188-disp-gamma
+ - mediatek,mt8192-disp-gamma
+ - mediatek,mt8195-disp-gamma
+ - const: mediatek,mt8183-disp-gamma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: GAMMA Clock
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gamma@14016000 {
+ compatible = "mediatek,mt8173-disp-gamma";
+ reg = <0 0x14016000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,hdmi-ddc.yaml b/Bindings/display/mediatek/mediatek,hdmi-ddc.yaml
new file mode 100644
index 0000000..bd8f7b8
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,hdmi-ddc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek HDMI DDC
+
+maintainers:
+ - CK Hu <ck.hu@mediatek.com>
+ - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+ The HDMI DDC i2c controller is used to interface with the HDMI DDC pins.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt7623-hdmi-ddc
+ - mediatek,mt8167-hdmi-ddc
+ - mediatek,mt8173-hdmi-ddc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: ddc-i2c
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ hdmi_ddc0: i2c@11012000 {
+ compatible = "mediatek,mt8173-hdmi-ddc";
+ reg = <0x11012000 0x1c>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_I2C5>;
+ clock-names = "ddc-i2c";
+ };
+
+...
diff --git a/Bindings/display/mediatek/mediatek,hdmi.yaml b/Bindings/display/mediatek/mediatek,hdmi.yaml
new file mode 100644
index 0000000..b90b6d1
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,hdmi.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek HDMI Encoder
+
+maintainers:
+ - CK Hu <ck.hu@mediatek.com>
+ - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+ The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from
+ its parallel input.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt2701-hdmi
+ - mediatek,mt7623-hdmi
+ - mediatek,mt8167-hdmi
+ - mediatek,mt8173-hdmi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Pixel Clock
+ - description: HDMI PLL
+ - description: Bit Clock
+ - description: S/PDIF Clock
+
+ clock-names:
+ items:
+ - const: pixel
+ - const: pll
+ - const: bclk
+ - const: spdif
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: hdmi
+
+ mediatek,syscon-hdmi:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to system configuration registers
+ - description: register offset in the system configuration registers
+ description: |
+ phandle link and register offset to the system configuration registers.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Input port node. This port should be connected to a DPI output port.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Output port node. This port should be connected to the input port of a connector
+ node that contains a ddc-i2c-bus property, or to the input port of an attached
+ bridge chip, such as a SlimPort transmitter.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+ - mediatek,syscon-hdmi
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ hdmi0: hdmi@14025000 {
+ compatible = "mediatek,mt8173-hdmi";
+ reg = <0x14025000 0x400>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
+ <&mmsys CLK_MM_HDMI_PLLCK>,
+ <&mmsys CLK_MM_HDMI_AUDIO>,
+ <&mmsys CLK_MM_HDMI_SPDIF>;
+ clock-names = "pixel", "pll", "bclk", "spdif";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pin>;
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ mediatek,syscon-hdmi = <&mmsys 0x900>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Bindings/display/mediatek/mediatek,mdp-rdma.yaml
new file mode 100644
index 0000000..dd12e2f
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,mdp-rdma.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MDP RDMA
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+ The MediaTek MDP RDMA stands for Read Direct Memory Access.
+ It provides real time data to the back-end panel driver, such as DSI,
+ DPI and DP_INTF.
+ It contains one line buffer to store the sufficient pixel data.
+ RDMA device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details.
+
+properties:
+ compatible:
+ const: mediatek,mt8195-vdo1-rdma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: RDMA Clock
+
+ iommus:
+ maxItems: 1
+
+ mediatek,gce-client-reg:
+ description:
+ The register of display function block to be set by gce. There are 4 arguments,
+ such as gce node, subsys id, offset and register size. The subsys id that is
+ mapping to the register of display function blocks is defined in the gce header
+ include/dt-bindings/gce/<chip>-gce.h of each chips.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle of GCE
+ - description: GCE subsys id
+ - description: register offset
+ - description: register size
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - clocks
+ - iommus
+ - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8195-clk.h>
+ #include <dt-bindings/power/mt8195-power.h>
+ #include <dt-bindings/gce/mt8195-gce.h>
+ #include <dt-bindings/memory/mt8195-memory-port.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rdma@1c104000 {
+ compatible = "mediatek,mt8195-vdo1-rdma";
+ reg = <0 0x1c104000 0 0x1000>;
+ interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+ iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
+ mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,merge.yaml b/Bindings/display/mediatek/mediatek,merge.yaml
new file mode 100644
index 0000000..eead5cb
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,merge.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,merge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display merge
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display merge, namely MERGE, is used to merge two slice-per-line
+ inputs into one side-by-side output.
+ MERGE device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8173-disp-merge
+ - mediatek,mt8195-disp-merge
+ - items:
+ - const: mediatek,mt6795-disp-merge
+ - const: mediatek,mt8173-disp-merge
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ oneOf:
+ - items:
+ - const: merge
+ - items:
+ - const: merge
+ - const: merge_async
+
+ mediatek,merge-fifo-en:
+ description:
+ The setting of merge fifo is mainly provided for the display latency
+ buffer to ensure that the back-end panel display data will not be
+ underrun, a little more data is needed in the fifo.
+ According to the merge fifo settings, when the water level is detected
+ to be insufficient, it will trigger RDMA sending ultra and preulra
+ command to SMI to speed up the data rate.
+ type: boolean
+
+ mediatek,merge-mute:
+ description: Support mute function. Mute the content of merge output.
+ type: boolean
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+ resets:
+ description: reset controller
+ See Documentation/devicetree/bindings/reset/reset.txt for details.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ merge@14017000 {
+ compatible = "mediatek,mt8173-disp-merge";
+ reg = <0 0x14017000 0 0x1000>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_MERGE>;
+ clock-names = "merge";
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,od.yaml b/Bindings/display/mediatek/mediatek,od.yaml
new file mode 100644
index 0000000..831c653
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,od.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,od.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overdirve
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display overdrive, namely OD, increases the transition values
+ of pixels between consecutive frames to make LCD rotate faster.
+ OD device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2712-disp-od
+ - mediatek,mt8173-disp-od
+ - items:
+ - const: mediatek,mt6795-disp-od
+ - const: mediatek,mt8173-disp-od
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: OD Clock
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ od@14023000 {
+ compatible = "mediatek,mt8173-disp-od";
+ reg = <0 0x14023000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_DISP_OD>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,ovl-2l.yaml b/Bindings/display/mediatek/mediatek,ovl-2l.yaml
new file mode 100644
index 0000000..c7dd0ef
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,ovl-2l.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl-2l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay 2 layer
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display overlay 2 layer, namely OVL-2L, provides 2 more layer
+ for OVL.
+ OVL-2L device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8183-disp-ovl-2l
+ - mediatek,mt8192-disp-ovl-2l
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-ovl-2l
+ - const: mediatek,mt8192-disp-ovl-2l
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: OVL-2L Clock
+
+ iommus:
+ description:
+ This property should point to the respective IOMMU block with master port as argument,
+ see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8183-clk.h>
+ #include <dt-bindings/power/mt8183-power.h>
+ #include <dt-bindings/gce/mt8183-gce.h>
+ #include <dt-bindings/memory/mt8183-larb-port.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ovl_2l0: ovl@14009000 {
+ compatible = "mediatek,mt8183-disp-ovl-2l";
+ reg = <0 0x14009000 0 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+ iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,ovl.yaml b/Bindings/display/mediatek/mediatek,ovl.yaml
new file mode 100644
index 0000000..3e1069b
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,ovl.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display overlay, namely OVL, can do alpha blending from
+ the memory.
+ OVL device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-disp-ovl
+ - mediatek,mt8173-disp-ovl
+ - mediatek,mt8183-disp-ovl
+ - mediatek,mt8192-disp-ovl
+ - items:
+ - enum:
+ - mediatek,mt7623-disp-ovl
+ - mediatek,mt2712-disp-ovl
+ - const: mediatek,mt2701-disp-ovl
+ - items:
+ - enum:
+ - mediatek,mt6795-disp-ovl
+ - const: mediatek,mt8173-disp-ovl
+ - items:
+ - enum:
+ - mediatek,mt8188-disp-ovl
+ - mediatek,mt8195-disp-ovl
+ - const: mediatek,mt8183-disp-ovl
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-ovl
+ - const: mediatek,mt8192-disp-ovl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: OVL Clock
+
+ iommus:
+ description:
+ This property should point to the respective IOMMU block with master port as argument,
+ see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+ #include <dt-bindings/memory/mt8173-larb-port.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ovl0: ovl@1400c000 {
+ compatible = "mediatek,mt8173-disp-ovl";
+ reg = <0 0x1400c000 0 0x1000>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_OVL0>;
+ iommus = <&iommu M4U_PORT_DISP_OVL0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,postmask.yaml b/Bindings/display/mediatek/mediatek,postmask.yaml
new file mode 100644
index 0000000..11fe32e
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,postmask.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,postmask.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display postmask
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display postmask, namely POSTMASK, provides round corner pattern
+ generation.
+ POSTMASK device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8192-disp-postmask
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-postmask
+ - mediatek,mt8188-disp-postmask
+ - const: mediatek,mt8192-disp-postmask
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: POSTMASK Clock
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8192-clk.h>
+ #include <dt-bindings/power/mt8192-power.h>
+ #include <dt-bindings/gce/mt8192-gce.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ postmask0: postmask@1400d000 {
+ compatible = "mediatek,mt8192-disp-postmask";
+ reg = <0 0x1400d000 0 0x1000>;
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>;
+ power-domains = <&scpsys MT8192_POWER_DOMAIN_DISP>;
+ clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,rdma.yaml b/Bindings/display/mediatek/mediatek,rdma.yaml
new file mode 100644
index 0000000..39dbb5c
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,rdma.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Read Direct Memory Access
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek Read Direct Memory Access(RDMA) component used to read the
+ data into DMA. It provides real time data to the back-end panel
+ driver, such as DSI, DPI and DP_INTF.
+ It contains one line buffer to store the sufficient pixel data.
+ RDMA device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt2701-disp-rdma
+ - mediatek,mt8173-disp-rdma
+ - mediatek,mt8183-disp-rdma
+ - mediatek,mt8195-disp-rdma
+ - items:
+ - enum:
+ - mediatek,mt8188-disp-rdma
+ - const: mediatek,mt8195-disp-rdma
+ - items:
+ - enum:
+ - mediatek,mt7623-disp-rdma
+ - mediatek,mt2712-disp-rdma
+ - const: mediatek,mt2701-disp-rdma
+ - items:
+ - enum:
+ - mediatek,mt6795-disp-rdma
+ - const: mediatek,mt8173-disp-rdma
+ - items:
+ - enum:
+ - mediatek,mt8186-disp-rdma
+ - mediatek,mt8192-disp-rdma
+ - const: mediatek,mt8183-disp-rdma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: RDMA Clock
+
+ iommus:
+ description:
+ This property should point to the respective IOMMU block with master port as argument,
+ see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+ mediatek,rdma-fifo-size:
+ description:
+ rdma fifo size may be different even in same SOC, add this property to the
+ corresponding rdma.
+ The value below is the Max value which defined in hardware data sheet
+ mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
+ mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
+ mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [8192, 5120, 2048]
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+ #include <dt-bindings/memory/mt8173-larb-port.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rdma0: rdma@1400e000 {
+ compatible = "mediatek,mt8173-disp-rdma";
+ reg = <0 0x1400e000 0 0x1000>;
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+ iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+ mediatek,rdma-fifo-size = <8192>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,split.yaml b/Bindings/display/mediatek/mediatek,split.yaml
new file mode 100644
index 0000000..a8a5c96
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,split.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,split.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display split
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display split, namely SPLIT, is used to split stream to two
+ encoders.
+ SPLIT device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8173-disp-split
+ - items:
+ - const: mediatek,mt6795-disp-split
+ - const: mediatek,mt8173-disp-split
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: SPLIT Clock
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ split0: split@14018000 {
+ compatible = "mediatek,mt8173-disp-split";
+ reg = <0 0x14018000 0 0x1000>;
+ power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,ufoe.yaml b/Bindings/display/mediatek/mediatek,ufoe.yaml
new file mode 100644
index 0000000..39e3e2d
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,ufoe.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ufoe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display UFOe
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek display UFOe stands for Unified Frame Optimization engine.
+ UFOe can cut the data rate for DSI port which may lead to reduce power
+ consumption.
+ UFOe device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8173-disp-ufoe
+ - items:
+ - const: mediatek,mt6795-disp-ufoe
+ - const: mediatek,mt8173-disp-ufoe
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: UFOe Clock
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ ufoe@1401a000 {
+ compatible = "mediatek,mt8173-disp-ufoe";
+ reg = <0 0x1401a000 0 0x1000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_UFOE>;
+ };
+ };
diff --git a/Bindings/display/mediatek/mediatek,wdma.yaml b/Bindings/display/mediatek/mediatek,wdma.yaml
new file mode 100644
index 0000000..a3a2b71
--- /dev/null
+++ b/Bindings/display/mediatek/mediatek,wdma.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Write Direct Memory Access
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+ Mediatek Write Direct Memory Access(WDMA) component used to write
+ the data into DMA.
+ WDMA device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+ for details.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - mediatek,mt8173-disp-wdma
+ - items:
+ - const: mediatek,mt6795-disp-wdma
+ - const: mediatek,mt8173-disp-wdma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ description: A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle. See
+ Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+ clocks:
+ items:
+ - description: WDMA Clock
+
+ iommus:
+ description:
+ This property should point to the respective IOMMU block with master port as argument,
+ see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+ mediatek,gce-client-reg:
+ description: The register of client driver can be configured by gce with
+ 4 arguments defined in this property, such as phandle of gce, subsys id,
+ register offset and size. Each GCE subsys id is mapping to a client
+ defined in the header include/dt-bindings/gce/<chip>-gce.h.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - power-domains
+ - clocks
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8173-clk.h>
+ #include <dt-bindings/power/mt8173-power.h>
+ #include <dt-bindings/gce/mt8173-gce.h>
+ #include <dt-bindings/memory/mt8173-larb-port.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ wdma0: wdma@14011000 {
+ compatible = "mediatek,mt8173-disp-wdma";
+ reg = <0 0x14011000 0 0x1000>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+ iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+ };
+ };
diff --git a/Bindings/display/mipi-dsi-bus.txt b/Bindings/display/mipi-dsi-bus.txt
new file mode 100644
index 0000000..a336599
--- /dev/null
+++ b/Bindings/display/mipi-dsi-bus.txt
@@ -0,0 +1,235 @@
+MIPI DSI (Display Serial Interface) busses
+==========================================
+
+The MIPI Display Serial Interface specifies a serial bus and a protocol for
+communication between a host and up to four peripherals. This document will
+define the syntax used to represent a DSI bus in a device tree.
+
+This document describes DSI bus-specific properties only or defines existing
+standard properties in the context of the DSI bus.
+
+Each DSI host provides a DSI bus. The DSI host controller's node contains a
+set of properties that characterize the bus. Child nodes describe individual
+peripherals on that bus.
+
+The following assumes that only a single peripheral is connected to a DSI
+host. Experience shows that this is true for the large majority of setups.
+
+DSI host
+========
+
+In addition to the standard properties and those defined by the parent bus of
+a DSI host, the following properties apply to a node representing a DSI host.
+
+Required properties:
+- #address-cells: The number of cells required to represent an address on the
+ bus. DSI peripherals are addressed using a 2-bit virtual channel number, so
+ a maximum of 4 devices can be addressed on a single bus. Hence the value of
+ this property should be 1.
+- #size-cells: Should be 0. There are cases where it makes sense to use a
+ different value here. See below.
+
+Optional properties:
+- clock-master: boolean. Should be enabled if the host is being used in
+ conjunction with another DSI host to drive the same peripheral. Hardware
+ supporting such a configuration generally requires the data on both the busses
+ to be driven by the same clock. Only the DSI host instance controlling this
+ clock should contain this property.
+
+DSI peripheral
+==============
+
+Peripherals with DSI as control bus, or no control bus
+------------------------------------------------------
+
+Peripherals with the DSI bus as the primary control bus, or peripherals with
+no control bus but use the DSI bus to transmit pixel data are represented
+as child nodes of the DSI host's node. Properties described here apply to all
+DSI peripherals, but individual bindings may want to define additional,
+device-specific properties.
+
+Required properties:
+- reg: The virtual channel number of a DSI peripheral. Must be in the range
+ from 0 to 3.
+
+Some DSI peripherals respond to more than a single virtual channel. In that
+case two alternative representations can be chosen:
+- The reg property can take multiple entries, one for each virtual channel
+ that the peripheral responds to.
+- If the virtual channels that a peripheral responds to are consecutive, the
+ #size-cells can be set to 1. The first cell of each entry in the reg
+ property is the number of the first virtual channel and the second cell is
+ the number of consecutive virtual channels.
+
+Peripherals with a different control bus
+----------------------------------------
+
+There are peripherals that have I2C/SPI (or some other non-DSI bus) as the
+primary control bus, but are also connected to a DSI bus (mostly for the data
+path). Connections between such peripherals and a DSI host can be represented
+using the graph bindings [1], [2].
+
+Peripherals that support dual channel DSI
+-----------------------------------------
+
+Peripherals with higher bandwidth requirements can be connected to 2 DSI
+busses. Each DSI bus/channel drives some portion of the pixel data (generally
+left/right half of each line of the display, or even/odd lines of the display).
+The graph bindings should be used to represent the multiple DSI busses that are
+connected to this peripheral. Each DSI host's output endpoint can be linked to
+an input endpoint of the DSI peripheral.
+
+[1] Documentation/devicetree/bindings/graph.txt
+[2] Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Examples
+========
+- (1), (2) and (3) are examples of a DSI host and peripheral on the DSI bus
+ with different virtual channel configurations.
+- (4) is an example of a peripheral on a I2C control bus connected to a
+ DSI host using of-graph bindings.
+- (5) is an example of 2 DSI hosts driving a dual-channel DSI peripheral,
+ which uses I2C as its primary control bus.
+
+1)
+ dsi-host {
+ ...
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* peripheral responds to virtual channel 0 */
+ peripheral@0 {
+ compatible = "...";
+ reg = <0>;
+ };
+
+ ...
+ };
+
+2)
+ dsi-host {
+ ...
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* peripheral responds to virtual channels 0 and 2 */
+ peripheral@0 {
+ compatible = "...";
+ reg = <0, 2>;
+ };
+
+ ...
+ };
+
+3)
+ dsi-host {
+ ...
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* peripheral responds to virtual channels 1, 2 and 3 */
+ peripheral@1 {
+ compatible = "...";
+ reg = <1 3>;
+ };
+
+ ...
+ };
+
+4)
+ i2c-host {
+ ...
+
+ dsi-bridge@35 {
+ compatible = "...";
+ reg = <0x35>;
+
+ ports {
+ ...
+
+ port {
+ bridge_mipi_in: endpoint {
+ remote-endpoint = <&host_mipi_out>;
+ };
+ };
+ };
+ };
+ };
+
+ dsi-host {
+ ...
+
+ ports {
+ ...
+
+ port {
+ host_mipi_out: endpoint {
+ remote-endpoint = <&bridge_mipi_in>;
+ };
+ };
+ };
+ };
+
+5)
+ i2c-host {
+ dsi-bridge@35 {
+ compatible = "...";
+ reg = <0x35>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+ };
+ };
+ };
+
+ dsi0-host {
+ ...
+
+ /*
+ * this DSI instance drives the clock for both the host
+ * controllers
+ */
+ clock-master;
+
+ ports {
+ ...
+
+ port {
+ dsi0_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi1-host {
+ ...
+
+ ports {
+ ...
+
+ port {
+ dsi1_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/msm/dp-controller.yaml b/Bindings/display/msm/dp-controller.yaml
new file mode 100644
index 0000000..dbe398f
--- /dev/null
+++ b/Bindings/display/msm/dp-controller.yaml
@@ -0,0 +1,233 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dp-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MSM Display Port Controller
+
+maintainers:
+ - Kuogee Hsieh <quic_khsieh@quicinc.com>
+
+description: |
+ Device tree bindings for DisplayPort host controller for MSM targets
+ that are compatible with VESA DisplayPort interface specification.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - qcom,sc7180-dp
+ - qcom,sc7280-dp
+ - qcom,sc7280-edp
+ - qcom,sc8180x-dp
+ - qcom,sc8180x-edp
+ - qcom,sc8280xp-dp
+ - qcom,sc8280xp-edp
+ - qcom,sdm845-dp
+ - qcom,sm8350-dp
+ - items:
+ - enum:
+ - qcom,sm8250-dp
+ - qcom,sm8450-dp
+ - qcom,sm8550-dp
+ - const: qcom,sm8350-dp
+
+ reg:
+ minItems: 4
+ items:
+ - description: ahb register block
+ - description: aux register block
+ - description: link register block
+ - description: p0 register block
+ - description: p1 register block
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: AHB clock to enable register access
+ - description: Display Port AUX clock
+ - description: Display Port Link clock
+ - description: Link interface clock between DP and PHY
+ - description: Display Port Pixel clock
+
+ clock-names:
+ items:
+ - const: core_iface
+ - const: core_aux
+ - const: ctrl_link
+ - const: ctrl_link_iface
+ - const: stream_pixel
+
+ assigned-clocks:
+ items:
+ - description: link clock source
+ - description: pixel clock source
+
+ assigned-clock-parents:
+ items:
+ - description: phy 0 parent
+ - description: phy 1 parent
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: dp
+
+ operating-points-v2: true
+
+ opp-table:
+ type: object
+
+ power-domains:
+ maxItems: 1
+
+ aux-bus:
+ $ref: /schemas/display/dp-aux-bus.yaml#
+
+ data-lanes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ deprecated: true
+ minItems: 1
+ maxItems: 4
+ items:
+ maximum: 3
+
+ "#sound-dai-cells":
+ const: 0
+
+ vdda-0p9-supply:
+ deprecated: true
+ vdda-1p2-supply:
+ deprecated: true
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input endpoint of the controller
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Output endpoint of the controller
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+ items:
+ enum: [ 0, 1, 2, 3 ]
+
+ link-frequencies:
+ minItems: 1
+ maxItems: 4
+ items:
+ enum: [ 1620000000, 2700000000, 5400000000, 8100000000 ]
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+ - power-domains
+ - ports
+
+allOf:
+ # AUX BUS does not exist on DP controllers
+ # Audio output also is present only on DP output
+ # p1 regions is present on DP, but not on eDP
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-edp
+ - qcom,sc8180x-edp
+ - qcom,sc8280xp-edp
+ then:
+ properties:
+ "#sound-dai-cells": false
+ else:
+ properties:
+ aux-bus: false
+ reg:
+ minItems: 5
+ required:
+ - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ displayport-controller@ae90000 {
+ compatible = "qcom,sc7180-dp";
+ reg = <0xae90000 0x200>,
+ <0xae90200 0x200>,
+ <0xae90400 0xc00>,
+ <0xae91000 0x400>,
+ <0xae91400 0x400>;
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface", "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+
+ assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ power-domains = <&rpmhpd SC7180_CX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&typec>;
+ data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/dpu-common.yaml b/Bindings/display/msm/dpu-common.yaml
new file mode 100644
index 0000000..3f953aa
--- /dev/null
+++ b/Bindings/display/msm/dpu-common.yaml
@@ -0,0 +1,56 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU common properties
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ - Rob Clark <robdclark@gmail.com>
+
+description: |
+ Common properties for QCom DPU display controller.
+
+# Do not select this by default, otherwise it is also selected for all
+# display-controller@ nodes
+select:
+ false
+
+properties:
+ $nodename:
+ pattern: '^display-controller@[0-9a-f]+$'
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2: true
+ opp-table:
+ type: object
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Contains the list of output ports from DPU device. These ports
+ connect to interfaces that are external to the DPU hardware,
+ such as DSI, DP etc.
+
+ patternProperties:
+ "^port@[0-9a-f]+$":
+ $ref: /schemas/graph.yaml#/properties/port
+
+ # at least one port is required
+ required:
+ - port@0
+
+required:
+ - interrupts
+ - power-domains
+ - operating-points-v2
+ - ports
+
+additionalProperties: true
diff --git a/Bindings/display/msm/dsi-controller-main.yaml b/Bindings/display/msm/dsi-controller-main.yaml
new file mode 100644
index 0000000..c6dbab6
--- /dev/null
+++ b/Bindings/display/msm/dsi-controller-main.yaml
@@ -0,0 +1,454 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI controller
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - qcom,apq8064-dsi-ctrl
+ - qcom,msm8226-dsi-ctrl
+ - qcom,msm8916-dsi-ctrl
+ - qcom,msm8953-dsi-ctrl
+ - qcom,msm8974-dsi-ctrl
+ - qcom,msm8996-dsi-ctrl
+ - qcom,msm8998-dsi-ctrl
+ - qcom,qcm2290-dsi-ctrl
+ - qcom,sc7180-dsi-ctrl
+ - qcom,sc7280-dsi-ctrl
+ - qcom,sdm660-dsi-ctrl
+ - qcom,sdm845-dsi-ctrl
+ - qcom,sm6115-dsi-ctrl
+ - qcom,sm6125-dsi-ctrl
+ - qcom,sm6350-dsi-ctrl
+ - qcom,sm6375-dsi-ctrl
+ - qcom,sm8150-dsi-ctrl
+ - qcom,sm8250-dsi-ctrl
+ - qcom,sm8350-dsi-ctrl
+ - qcom,sm8450-dsi-ctrl
+ - qcom,sm8550-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+ - enum:
+ - qcom,dsi-ctrl-6g-qcm2290
+ - qcom,mdss-dsi-ctrl # This should always come with an SoC-specific compatible
+ deprecated: true
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ const: dsi_ctrl
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description: |
+ Several clocks are used, depending on the variant. Typical ones are::
+ - bus:: Display AHB clock.
+ - byte:: Display byte clock.
+ - byte_intf:: Display byte interface clock.
+ - core:: Display core clock.
+ - core_mss:: Core MultiMedia SubSystem clock.
+ - iface:: Display AXI clock.
+ - mdp_core:: MDP Core clock.
+ - mnoc:: MNOC clock
+ - pixel:: Display pixel clock.
+ minItems: 3
+ maxItems: 9
+
+ clock-names:
+ minItems: 3
+ maxItems: 9
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ deprecated: true
+ const: dsi
+
+ syscon-sfpb:
+ description: A phandle to mmss_sfpb syscon node (only for DSIv2).
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ qcom,dual-dsi-mode:
+ type: boolean
+ description: |
+ Indicates if the DSI controller is driving a panel which needs
+ 2 DSI links.
+
+ qcom,master-dsi:
+ type: boolean
+ description: |
+ Indicates if the DSI controller is the master DSI controller when
+ qcom,dual-dsi-mode enabled.
+
+ qcom,sync-dual-dsi:
+ type: boolean
+ description: |
+ Indicates if the DSI controller needs to sync the other DSI controller
+ with MIPI DCS commands when qcom,dual-dsi-mode enabled.
+
+ assigned-clocks:
+ minItems: 2
+ maxItems: 4
+ description: |
+ Parents of "byte" and "pixel" for the given platform.
+ For DSIv2 platforms this should contain "byte", "esc", "src" and
+ "pixel_src" clocks.
+
+ assigned-clock-parents:
+ minItems: 2
+ maxItems: 4
+ description: |
+ The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2: true
+
+ opp-table:
+ type: object
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Contains DSI controller input and output ports as children, each
+ containing one endpoint subnode.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: |
+ Input endpoints of the controller.
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ properties:
+ data-lanes:
+ maxItems: 4
+ minItems: 1
+ items:
+ enum: [ 0, 1, 2, 3 ]
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: |
+ Output endpoints of the controller.
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ properties:
+ data-lanes:
+ maxItems: 4
+ minItems: 1
+ items:
+ enum: [ 0, 1, 2, 3 ]
+
+ required:
+ - port@0
+ - port@1
+
+ avdd-supply:
+ description:
+ Phandle to vdd regulator device node
+
+ refgen-supply:
+ description:
+ Phandle to REFGEN regulator device node
+
+ vcca-supply:
+ description:
+ Phandle to vdd regulator device node
+
+ vdd-supply:
+ description:
+ VDD regulator
+
+ vddio-supply:
+ description:
+ VDD-IO regulator
+
+ vdda-supply:
+ description:
+ VDDA regulator
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+ - phys
+ - assigned-clocks
+ - assigned-clock-parents
+ - ports
+
+allOf:
+ - $ref: ../dsi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,apq8064-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 7
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core_mmss
+ - const: src
+ - const: byte
+ - const: pixel
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8916-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 6
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: iface
+ - const: bus
+ - const: byte
+ - const: pixel
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8953-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 6
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: iface
+ - const: bus
+ - const: byte
+ - const: pixel
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8226-dsi-ctrl
+ - qcom,msm8974-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 7
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: iface
+ - const: bus
+ - const: byte
+ - const: pixel
+ - const: core
+ - const: core_mmss
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8996-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 7
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: byte
+ - const: iface
+ - const: bus
+ - const: core_mmss
+ - const: pixel
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8998-dsi-ctrl
+ - qcom,sm6125-dsi-ctrl
+ - qcom,sm6350-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 6
+ clock-names:
+ items:
+ - const: byte
+ - const: byte_intf
+ - const: pixel
+ - const: core
+ - const: iface
+ - const: bus
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7180-dsi-ctrl
+ - qcom,sc7280-dsi-ctrl
+ - qcom,sm8150-dsi-ctrl
+ - qcom,sm8250-dsi-ctrl
+ - qcom,sm8350-dsi-ctrl
+ - qcom,sm8450-dsi-ctrl
+ - qcom,sm8550-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 6
+ clock-names:
+ items:
+ - const: byte
+ - const: byte_intf
+ - const: pixel
+ - const: core
+ - const: iface
+ - const: bus
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sdm660-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 9
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: byte
+ - const: byte_intf
+ - const: mnoc
+ - const: iface
+ - const: bus
+ - const: core_mmss
+ - const: pixel
+ - const: core
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sdm845-dsi-ctrl
+ - qcom,sm6115-dsi-ctrl
+ - qcom,sm6375-dsi-ctrl
+ then:
+ properties:
+ clocks:
+ maxItems: 6
+ clock-names:
+ items:
+ - const: byte
+ - const: byte_intf
+ - const: pixel
+ - const: core
+ - const: iface
+ - const: bus
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ dsi@ae94000 {
+ compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&dsi_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ remote-endpoint = <&sn65dsi86_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/dsi-phy-10nm.yaml b/Bindings/display/msm/dsi-phy-10nm.yaml
new file mode 100644
index 0000000..69d1386
--- /dev/null
+++ b/Bindings/display/msm/dsi-phy-10nm.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 10nm PHY
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+ - $ref: dsi-phy-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,dsi-phy-10nm
+ - qcom,dsi-phy-10nm-8998
+
+ reg:
+ items:
+ - description: dsi phy register set
+ - description: dsi phy lane register set
+ - description: dsi pll register set
+
+ reg-names:
+ items:
+ - const: dsi_phy
+ - const: dsi_phy_lane
+ - const: dsi_pll
+
+ vdds-supply:
+ description: |
+ Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and
+ connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target
+
+ qcom,phy-rescode-offset-top:
+ $ref: /schemas/types.yaml#/definitions/int8-array
+ maxItems: 5
+ description:
+ Integer array of offset for pull-up legs rescode for all five lanes.
+ To offset the drive strength from the calibrated value in an increasing
+ manner, -32 is the weakest and +31 is the strongest.
+ items:
+ minimum: -32
+ maximum: 31
+
+ qcom,phy-rescode-offset-bot:
+ $ref: /schemas/types.yaml#/definitions/int8-array
+ maxItems: 5
+ description:
+ Integer array of offset for pull-down legs rescode for all five lanes.
+ To offset the drive strength from the calibrated value in a decreasing
+ manner, -32 is the weakest and +31 is the strongest.
+ items:
+ minimum: -32
+ maximum: 31
+
+ qcom,phy-drive-ldo-level:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The PHY LDO has an amplitude tuning feature to adjust the LDO output
+ for the HSTX drive. Use supported levels (mV) to offset the drive level
+ from the default value.
+ enum: [ 375, 400, 425, 450, 475, 500 ]
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+
+ dsi-phy@ae94400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>;
+ qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>;
+ qcom,phy-drive-ldo-level = <400>;
+ };
+...
diff --git a/Bindings/display/msm/dsi-phy-14nm.yaml b/Bindings/display/msm/dsi-phy-14nm.yaml
new file mode 100644
index 0000000..52bbe13
--- /dev/null
+++ b/Bindings/display/msm/dsi-phy-14nm.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 14nm PHY
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+ - $ref: dsi-phy-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,dsi-phy-14nm
+ - qcom,dsi-phy-14nm-2290
+ - qcom,dsi-phy-14nm-660
+ - qcom,dsi-phy-14nm-8953
+ - qcom,sm6125-dsi-phy-14nm
+
+ reg:
+ items:
+ - description: dsi phy register set
+ - description: dsi phy lane register set
+ - description: dsi pll register set
+
+ reg-names:
+ items:
+ - const: dsi_phy
+ - const: dsi_phy_lane
+ - const: dsi_pll
+
+ vcca-supply:
+ description: Phandle to vcca regulator device node.
+
+ power-domains:
+ description:
+ A phandle and PM domain specifier for an optional power domain.
+ maxItems: 1
+
+ required-opps:
+ description:
+ A phandle to an OPP node describing the power domain's performance point.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+
+ dsi-phy@ae94400 {
+ compatible = "qcom,dsi-phy-14nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ vcca-supply = <&vcca_reg>;
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+...
diff --git a/Bindings/display/msm/dsi-phy-20nm.yaml b/Bindings/display/msm/dsi-phy-20nm.yaml
new file mode 100644
index 0000000..7e6687c
--- /dev/null
+++ b/Bindings/display/msm/dsi-phy-20nm.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 20nm PHY
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+ - $ref: dsi-phy-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,dsi-phy-20nm
+
+ reg:
+ items:
+ - description: dsi pll register set
+ - description: dsi phy register set
+ - description: dsi phy regulator register set
+
+ reg-names:
+ items:
+ - const: dsi_pll
+ - const: dsi_phy
+ - const: dsi_phy_regulator
+
+ vcca-supply:
+ description: Phandle to vcca regulator device node.
+
+ vddio-supply:
+ description: Phandle to vdd-io regulator device node.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - vddio-supply
+ - vcca-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+
+ dsi-phy@fd922a00 {
+ compatible = "qcom,dsi-phy-20nm";
+ reg = <0xfd922a00 0xd4>,
+ <0xfd922b00 0x2b0>,
+ <0xfd922d80 0x7b>;
+ reg-names = "dsi_pll",
+ "dsi_phy",
+ "dsi_phy_regulator";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ vcca-supply = <&vcca_reg>;
+ vddio-supply = <&vddio_reg>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+...
diff --git a/Bindings/display/msm/dsi-phy-28nm.yaml b/Bindings/display/msm/dsi-phy-28nm.yaml
new file mode 100644
index 0000000..288d8ba
--- /dev/null
+++ b/Bindings/display/msm/dsi-phy-28nm.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 28nm PHY
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+allOf:
+ - $ref: dsi-phy-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,dsi-phy-28nm-8226
+ - qcom,dsi-phy-28nm-8960
+ - qcom,dsi-phy-28nm-hpm
+ - qcom,dsi-phy-28nm-hpm-fam-b
+ - qcom,dsi-phy-28nm-lp
+
+ reg:
+ items:
+ - description: dsi pll register set
+ - description: dsi phy register set
+ - description: dsi phy regulator register set
+
+ reg-names:
+ items:
+ - const: dsi_pll
+ - const: dsi_phy
+ - const: dsi_phy_regulator
+
+ vddio-supply:
+ description: Phandle to vdd-io regulator device node.
+
+ qcom,dsi-phy-regulator-ldo-mode:
+ type: boolean
+ description: Indicates if the LDO mode PHY regulator is wanted.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - vddio-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+
+ dsi-phy@fd922a00 {
+ compatible = "qcom,dsi-phy-28nm-lp";
+ reg = <0xfd922a00 0xd4>,
+ <0xfd922b00 0x2b0>,
+ <0xfd922d80 0x7b>;
+ reg-names = "dsi_pll",
+ "dsi_phy",
+ "dsi_phy_regulator";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ vddio-supply = <&vddio_reg>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+...
diff --git a/Bindings/display/msm/dsi-phy-7nm.yaml b/Bindings/display/msm/dsi-phy-7nm.yaml
new file mode 100644
index 0000000..dd66195
--- /dev/null
+++ b/Bindings/display/msm/dsi-phy-7nm.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-7nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 7nm PHY
+
+maintainers:
+ - Jonathan Marek <jonathan@marek.ca>
+
+allOf:
+ - $ref: dsi-phy-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,dsi-phy-7nm
+ - qcom,dsi-phy-7nm-8150
+ - qcom,sc7280-dsi-phy-7nm
+ - qcom,sm6375-dsi-phy-7nm
+ - qcom,sm8350-dsi-phy-5nm
+ - qcom,sm8450-dsi-phy-5nm
+ - qcom,sm8550-dsi-phy-4nm
+
+ reg:
+ items:
+ - description: dsi phy register set
+ - description: dsi phy lane register set
+ - description: dsi pll register set
+
+ reg-names:
+ items:
+ - const: dsi_phy
+ - const: dsi_phy_lane
+ - const: dsi_pll
+
+ vdds-supply:
+ description: |
+ Connected to VDD_A_DSI_PLL_0P9 pin (or VDDA_DSI{0,1}_PLL_0P9 for sm8150)
+
+ phy-type:
+ description: D-PHY (default) or C-PHY mode
+ enum: [ 10, 11 ]
+ default: 10
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+
+ dsi-phy@ae94400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ vdds-supply = <&vreg_l5a_0p88>;
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
diff --git a/Bindings/display/msm/dsi-phy-common.yaml b/Bindings/display/msm/dsi-phy-common.yaml
new file mode 100644
index 0000000..6b57ce4
--- /dev/null
+++ b/Bindings/display/msm/dsi-phy-common.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI PHY Common Properties
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+ Common properties for Qualcomm Display DSI PHY.
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ "#phy-cells":
+ const: 0
+
+ clocks:
+ items:
+ - description: Display AHB clock
+ - description: Board XO source
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ref
+
+required:
+ - clocks
+ - clock-names
+ - "#clock-cells"
+ - "#phy-cells"
+
+additionalProperties: true
+...
diff --git a/Bindings/display/msm/gmu.yaml b/Bindings/display/msm/gmu.yaml
new file mode 100644
index 0000000..4e1c25b
--- /dev/null
+++ b/Bindings/display/msm/gmu.yaml
@@ -0,0 +1,323 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright 2019-2020, The Linux Foundation, All Rights Reserved
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/gmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GMU attached to certain Adreno GPUs
+
+maintainers:
+ - Rob Clark <robdclark@gmail.com>
+
+description: |
+ These bindings describe the Graphics Management Unit (GMU) that is attached
+ to members of the Adreno A6xx GPU family. The GMU provides on-device power
+ management and support to improve power efficiency and reduce the load on
+ the CPU.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - pattern: '^qcom,adreno-gmu-[67][0-9][0-9]\.[0-9]$'
+ - const: qcom,adreno-gmu
+ - const: qcom,adreno-gmu-wrapper
+
+ reg:
+ minItems: 1
+ maxItems: 4
+
+ reg-names:
+ minItems: 1
+ maxItems: 4
+
+ clocks:
+ minItems: 4
+ maxItems: 7
+
+ clock-names:
+ minItems: 4
+ maxItems: 7
+
+ interrupts:
+ items:
+ - description: GMU HFI interrupt
+ - description: GMU interrupt
+
+ interrupt-names:
+ items:
+ - const: hfi
+ - const: gmu
+
+ power-domains:
+ items:
+ - description: CX power domain
+ - description: GX power domain
+
+ power-domain-names:
+ items:
+ - const: cx
+ - const: gx
+
+ iommus:
+ maxItems: 1
+
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM
+
+ operating-points-v2: true
+
+ opp-table:
+ type: object
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - power-domains
+ - power-domain-names
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,adreno-gmu-618.0
+ - qcom,adreno-gmu-630.2
+ then:
+ properties:
+ reg:
+ items:
+ - description: Core GMU registers
+ - description: GMU PDC registers
+ - description: GMU PDC sequence registers
+ reg-names:
+ items:
+ - const: gmu
+ - const: gmu_pdc
+ - const: gmu_pdc_seq
+ clocks:
+ items:
+ - description: GMU clock
+ - description: GPU CX clock
+ - description: GPU AXI clock
+ - description: GPU MEMNOC clock
+ clock-names:
+ items:
+ - const: gmu
+ - const: cxo
+ - const: axi
+ - const: memnoc
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,adreno-gmu-635.0
+ - qcom,adreno-gmu-660.1
+ then:
+ properties:
+ reg:
+ items:
+ - description: Core GMU registers
+ - description: Resource controller registers
+ - description: GMU PDC registers
+ reg-names:
+ items:
+ - const: gmu
+ - const: rscc
+ - const: gmu_pdc
+ clocks:
+ items:
+ - description: GMU clock
+ - description: GPU CX clock
+ - description: GPU AXI clock
+ - description: GPU MEMNOC clock
+ - description: GPU AHB clock
+ - description: GPU HUB CX clock
+ - description: GPU SMMU vote clock
+ clock-names:
+ items:
+ - const: gmu
+ - const: cxo
+ - const: axi
+ - const: memnoc
+ - const: ahb
+ - const: hub
+ - const: smmu_vote
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,adreno-gmu-640.1
+ then:
+ properties:
+ reg:
+ items:
+ - description: Core GMU registers
+ - description: GMU PDC registers
+ - description: GMU PDC sequence registers
+ reg-names:
+ items:
+ - const: gmu
+ - const: gmu_pdc
+ - const: gmu_pdc_seq
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,adreno-gmu-650.2
+ then:
+ properties:
+ reg:
+ items:
+ - description: Core GMU registers
+ - description: Resource controller registers
+ - description: GMU PDC registers
+ - description: GMU PDC sequence registers
+ reg-names:
+ items:
+ - const: gmu
+ - const: rscc
+ - const: gmu_pdc
+ - const: gmu_pdc_seq
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,adreno-gmu-640.1
+ - qcom,adreno-gmu-650.2
+ then:
+ properties:
+ clocks:
+ items:
+ - description: GPU AHB clock
+ - description: GMU clock
+ - description: GPU CX clock
+ - description: GPU AXI clock
+ - description: GPU MEMNOC clock
+ clock-names:
+ items:
+ - const: ahb
+ - const: gmu
+ - const: cxo
+ - const: axi
+ - const: memnoc
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,adreno-gmu-730.1
+ - qcom,adreno-gmu-740.1
+ then:
+ properties:
+ reg:
+ items:
+ - description: Core GMU registers
+ - description: Resource controller registers
+ - description: GMU PDC registers
+ reg-names:
+ items:
+ - const: gmu
+ - const: rscc
+ - const: gmu_pdc
+ clocks:
+ items:
+ - description: GPU AHB clock
+ - description: GMU clock
+ - description: GPU CX clock
+ - description: GPU AXI clock
+ - description: GPU MEMNOC clock
+ - description: GMU HUB clock
+ - description: GPUSS DEMET clock
+ clock-names:
+ items:
+ - const: ahb
+ - const: gmu
+ - const: cxo
+ - const: axi
+ - const: memnoc
+ - const: hub
+ - const: demet
+
+ required:
+ - qcom,qmp
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,adreno-gmu-wrapper
+ then:
+ properties:
+ reg:
+ items:
+ - description: GMU wrapper register space
+ reg-names:
+ items:
+ - const: gmu
+ else:
+ required:
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - iommus
+ - operating-points-v2
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gmu: gmu@506a000 {
+ compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+
+ reg = <0x506a000 0x30000>,
+ <0xb280000 0x10000>,
+ <0xb480000 0x10000>;
+ reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+ clock-names = "gmu", "cxo", "axi", "memnoc";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
+ power-domain-names = "cx", "gx";
+
+ iommus = <&adreno_smmu 5>;
+ operating-points-v2 = <&gmu_opp_table>;
+ };
+
+ gmu_wrapper: gmu@596a000 {
+ compatible = "qcom,adreno-gmu-wrapper";
+ reg = <0x0596a000 0x30000>;
+ reg-names = "gmu";
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
+ power-domain-names = "cx", "gx";
+ };
diff --git a/Bindings/display/msm/gpu.yaml b/Bindings/display/msm/gpu.yaml
new file mode 100644
index 0000000..b019db9
--- /dev/null
+++ b/Bindings/display/msm/gpu.yaml
@@ -0,0 +1,343 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/gpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Adreno or Snapdragon GPUs
+
+maintainers:
+ - Rob Clark <robdclark@gmail.com>
+
+properties:
+ compatible:
+ oneOf:
+ - description: |
+ The driver is parsing the compat string for Adreno to
+ figure out the chip-id.
+ items:
+ - pattern: '^qcom,adreno-[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]$'
+ - const: qcom,adreno
+ - description: |
+ The driver is parsing the compat string for Adreno to
+ figure out the gpu-id and patch level.
+ items:
+ - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]$'
+ - const: qcom,adreno
+ - description: |
+ The driver is parsing the compat string for Imageon to
+ figure out the gpu-id and patch level.
+ items:
+ - pattern: '^amd,imageon-200\.[0-1]$'
+ - const: amd,imageon
+
+ clocks: true
+
+ clock-names: true
+
+ reg:
+ minItems: 1
+ maxItems: 3
+
+ reg-names:
+ minItems: 1
+ maxItems: 3
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ maxItems: 1
+
+ interconnects:
+ minItems: 1
+ maxItems: 2
+
+ interconnect-names:
+ minItems: 1
+ items:
+ - const: gfx-mem
+ - const: ocmem
+
+ iommus:
+ minItems: 1
+ maxItems: 64
+
+ sram:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ minItems: 1
+ maxItems: 4
+ items:
+ maxItems: 1
+ description: |
+ phandles to one or more reserved on-chip SRAM regions.
+ phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
+ a4xx Snapdragon SoCs. See
+ Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
+
+ operating-points-v2: true
+ opp-table:
+ type: object
+
+ power-domains:
+ maxItems: 1
+
+ zap-shader:
+ type: object
+ additionalProperties: false
+ description: |
+ For a5xx and a6xx devices this node contains a memory-region that
+ points to reserved memory to store the zap shader that can be used to
+ help bring the GPU out of secure mode.
+ properties:
+ memory-region:
+ maxItems: 1
+
+ firmware-name:
+ description: |
+ Default name of the firmware to load to the remote processor.
+
+ "#cooling-cells":
+ const: 2
+
+ nvmem-cell-names:
+ maxItems: 1
+
+ nvmem-cells:
+ description: efuse registers
+ maxItems: 1
+
+ qcom,gmu:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ For GMU attached devices a phandle to the GMU device that will
+ control the power for the GPU.
+
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$'
+
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 7
+
+ clock-names:
+ items:
+ anyOf:
+ - const: core
+ description: GPU Core clock
+ - const: iface
+ description: GPU Interface clock
+ - const: mem
+ description: GPU Memory clock
+ - const: mem_iface
+ description: GPU Memory Interface clock
+ - const: alt_mem_iface
+ description: GPU Alternative Memory Interface clock
+ - const: gfx3d
+ description: GPU 3D engine clock
+ - const: rbbmtimer
+ description: GPU RBBM Timer for Adreno 5xx series
+ - const: rbcpr
+ description: GPU RB Core Power Reduction clock
+ minItems: 2
+ maxItems: 7
+
+ required:
+ - clocks
+ - clock-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,adreno-610.0
+ - qcom,adreno-619.1
+ then:
+ properties:
+ clocks:
+ minItems: 6
+ maxItems: 6
+
+ clock-names:
+ items:
+ - const: core
+ description: GPU Core clock
+ - const: iface
+ description: GPU Interface clock
+ - const: mem_iface
+ description: GPU Memory Interface clock
+ - const: alt_mem_iface
+ description: GPU Alternative Memory Interface clock
+ - const: gmu
+ description: CX GMU clock
+ - const: xo
+ description: GPUCC clocksource clock
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: kgsl_3d0_reg_memory
+ - const: cx_dbgc
+
+ required:
+ - clocks
+ - clock-names
+ else:
+ if:
+ properties:
+ compatible:
+ contains:
+ pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]$'
+
+ then: # Starting with A6xx, the clocks are usually defined in the GMU node
+ properties:
+ clocks: false
+ clock-names: false
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: kgsl_3d0_reg_memory
+ - const: cx_mem
+ - const: cx_dbgc
+
+examples:
+ - |
+
+ // Example a3xx/4xx:
+
+ #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gpu: gpu@fdb00000 {
+ compatible = "qcom,adreno-330.2", "qcom,adreno";
+
+ reg = <0xfdb00000 0x10000>;
+ reg-names = "kgsl_3d0_reg_memory";
+
+ clock-names = "core", "iface", "mem_iface";
+ clocks = <&mmcc OXILI_GFX3D_CLK>,
+ <&mmcc OXILICX_AHB_CLK>,
+ <&mmcc OXILICX_AXI_CLK>;
+
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+
+ sram = <&gpu_sram>;
+ power-domains = <&mmcc OXILICX_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+ iommus = <&gpu_iommu 0>;
+ #cooling-cells = <2>;
+ };
+
+ ocmem@fdd00000 {
+ compatible = "qcom,msm8974-ocmem";
+
+ reg = <0xfdd00000 0x2000>,
+ <0xfec00000 0x180000>;
+ reg-names = "ctrl", "mem";
+
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+ clock-names = "core", "iface";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xfec00000 0x100000>;
+
+ gpu_sram: gpu-sram@0 {
+ reg = <0x0 0x100000>;
+ };
+ };
+ - |
+
+ // Example a6xx (with GMU):
+
+ #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ zap_shader_region: gpu@8f200000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x90b00000 0x0 0xa00000>;
+ no-map;
+ };
+ };
+
+ gpu@5000000 {
+ compatible = "qcom,adreno-630.2", "qcom,adreno";
+
+ reg = <0x5000000 0x40000>, <0x509e000 0x10>;
+ reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+ #cooling-cells = <2>;
+
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&adreno_smmu 0>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+ interconnect-names = "gfx-mem";
+
+ qcom,gmu = <&gmu>;
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-430000000 {
+ opp-hz = /bits/ 64 <430000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-peak-kBps = <5412000>;
+ };
+
+ opp-355000000 {
+ opp-hz = /bits/ 64 <355000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ opp-peak-kBps = <3072000>;
+ };
+
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ opp-peak-kBps = <3072000>;
+ };
+
+ opp-180000000 {
+ opp-hz = /bits/ 64 <180000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ opp-peak-kBps = <1804000>;
+ };
+ };
+
+ zap-shader {
+ memory-region = <&zap_shader_region>;
+ firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
+ };
+ };
diff --git a/Bindings/display/msm/hdmi.yaml b/Bindings/display/msm/hdmi.yaml
new file mode 100644
index 0000000..47e9766
--- /dev/null
+++ b/Bindings/display/msm/hdmi.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI output
+
+maintainers:
+ - Rob Clark <robdclark@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - qcom,hdmi-tx-8084
+ - qcom,hdmi-tx-8660
+ - qcom,hdmi-tx-8960
+ - qcom,hdmi-tx-8974
+ - qcom,hdmi-tx-8994
+ - qcom,hdmi-tx-8996
+
+ clocks:
+ minItems: 1
+ maxItems: 5
+
+ clock-names:
+ minItems: 1
+ maxItems: 5
+
+ reg:
+ minItems: 1
+ maxItems: 3
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: core_physical
+ - const: qfprom_physical
+ - const: hdcp_physical
+
+ interrupts:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ enum:
+ - hdmi_phy
+ - hdmi-phy
+ deprecated: true
+
+ core-vdda-supply:
+ description: phandle to VDDA supply regulator
+
+ hdmi-mux-supply:
+ description: phandle to mux regulator
+ deprecated: true
+
+ core-vcc-supply:
+ description: phandle to VCC supply regulator
+
+ hpd-gpios:
+ maxItems: 1
+ description: hpd pin
+
+ qcom,hdmi-tx-mux-en-gpios:
+ maxItems: 1
+ deprecated: true
+ description: HDMI mux enable pin
+
+ qcom,hdmi-tx-mux-sel-gpios:
+ maxItems: 1
+ deprecated: true
+ description: HDMI mux select pin
+
+ qcom,hdmi-tx-mux-lpm-gpios:
+ maxItems: 1
+ deprecated: true
+ description: HDMI mux lpm pin
+
+ '#sound-dai-cells':
+ const: 1
+
+ ports:
+ type: object
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: |
+ Input endpoints of the controller.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description: |
+ Output endpoints of the controller.
+
+ required:
+ - port@0
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - reg
+ - reg-names
+ - interrupts
+ - phys
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,hdmi-tx-8960
+ - qcom,hdmi-tx-8660
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ clock-names:
+ items:
+ - const: core
+ - const: master_iface
+ - const: slave_iface
+ core-vcc-supplies: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,hdmi-tx-8974
+ - qcom,hdmi-tx-8084
+ - qcom,hdmi-tx-8994
+ - qcom,hdmi-tx-8996
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ clock-names:
+ items:
+ - const: mdp_core
+ - const: iface
+ - const: core
+ - const: alt_iface
+ - const: extp
+ hdmi-mux-supplies: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ hdmi: hdmi@4a00000 {
+ compatible = "qcom,hdmi-tx-8960";
+ reg-names = "core_physical";
+ reg = <0x04a00000 0x2f0>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core",
+ "master_iface",
+ "slave_iface";
+ clocks = <&clk 61>,
+ <&clk 72>,
+ <&clk 98>;
+ hpd-gpios = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+ core-vdda-supply = <&pm8921_hdmi_mvs>;
+ hdmi-mux-supply = <&ext_3p3v>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&hpd_active &ddc_active &cec_active>;
+ pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+ phys = <&hdmi_phy>;
+ };
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+ #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ hdmi@9a0000 {
+ compatible = "qcom,hdmi-tx-8996";
+ reg = <0x009a0000 0x50c>,
+ <0x00070000 0x6158>,
+ <0x009e0000 0xfff>;
+ reg-names = "core_physical",
+ "qfprom_physical",
+ "hdcp_physical";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_HDMI_CLK>,
+ <&mmcc MDSS_HDMI_AHB_CLK>,
+ <&mmcc MDSS_EXTPCLK_CLK>;
+ clock-names = "mdp_core",
+ "iface",
+ "core",
+ "alt_iface",
+ "extp";
+
+ phys = <&hdmi_phy>;
+ #sound-dai-cells = <1>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+ pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+ core-vdda-supply = <&vreg_l12a_1p8>;
+ core-vcc-supply = <&vreg_s4a_1p8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&mdp5_intf3_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/mdp4.yaml b/Bindings/display/msm/mdp4.yaml
new file mode 100644
index 0000000..35204a2
--- /dev/null
+++ b/Bindings/display/msm/mdp4.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/mdp4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon MDP4 display controller
+
+description: >
+ MDP4 display controller found in SoCs like MSM8960, APQ8064 and MSM8660.
+
+maintainers:
+ - Rob Clark <robdclark@gmail.com>
+
+properties:
+ compatible:
+ const: qcom,mdp4
+
+ clocks:
+ minItems: 6
+ maxItems: 6
+
+ clock-names:
+ items:
+ - const: core_clk
+ - const: iface_clk
+ - const: bus_clk
+ - const: lut_clk
+ - const: hdmi_clk
+ - const: tv_clk
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ maxItems: 4
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: LCDC/LVDS
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI1 Cmd / Video
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DSI2 Cmd / Video
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Digital TV
+
+ qcom,lcdc-align-lsb:
+ type: boolean
+ description: >
+ Indication that LSB alignment should be used for LCDC.
+ This is only valid for 18bpp panels.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ mdp: mdp@5100000 {
+ compatible = "qcom,mdp4";
+ reg = <0x05100000 0xf0000>;
+ interrupts = <0 75 0>;
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "bus_clk",
+ "lut_clk",
+ "hdmi_clk",
+ "tv_clk";
+ clocks =
+ <&mmcc 77>,
+ <&mmcc 86>,
+ <&mmcc 102>,
+ <&mmcc 75>,
+ <&mmcc 97>,
+ <&mmcc 12>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp_lvds_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdp_dsi1_out: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ mdp_dsi2_out: endpoint {
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ mdp_dtv_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/msm/mdss-common.yaml b/Bindings/display/msm/mdss-common.yaml
new file mode 100644
index 0000000..f69196e
--- /dev/null
+++ b/Bindings/display/msm/mdss-common.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/mdss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display MDSS common properties
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ - Rob Clark <robdclark@gmail.com>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+# Do not select this by default, otherwise it is also selected for qcom,mdss
+# devices.
+select:
+ false
+
+properties:
+ $nodename:
+ pattern: "^display-subsystem@[0-9a-f]+$"
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ const: mdss
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 4
+
+ clock-names:
+ minItems: 2
+ maxItems: 4
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#address-cells": true
+
+ "#size-cells": true
+
+ "#interrupt-cells":
+ const: 1
+
+ iommus:
+ minItems: 1
+ items:
+ - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+ - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
+
+ ranges: true
+
+ interconnects:
+ minItems: 1
+ items:
+ - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+ - description: Interconnect path from mdp1 port to the data bus
+
+ interconnect-names:
+ minItems: 1
+ items:
+ - const: mdp0-mem
+ - const: mdp1-mem
+
+ resets:
+ items:
+ - description: MDSS_CORE reset
+
+ memory-region:
+ maxItems: 1
+ description:
+ Phandle to a node describing a reserved framebuffer memory region.
+ For example, the splash memory region set up by the bootloader.
+
+required:
+ - reg
+ - reg-names
+ - power-domains
+ - clocks
+ - interrupts
+ - interrupt-controller
+ - iommus
+ - ranges
+
+additionalProperties: true
diff --git a/Bindings/display/msm/qcom,mdp5.yaml b/Bindings/display/msm/qcom,mdp5.yaml
new file mode 100644
index 0000000..91c774f
--- /dev/null
+++ b/Bindings/display/msm/qcom,mdp5.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon Mobile Display controller (MDP5)
+
+description:
+ MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994
+ and MSM8996.
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ - Rob Clark <robdclark@gmail.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: qcom,mdp5
+ deprecated: true
+ - items:
+ - enum:
+ - qcom,apq8084-mdp5
+ - qcom,msm8226-mdp5
+ - qcom,msm8916-mdp5
+ - qcom,msm8917-mdp5
+ - qcom,msm8953-mdp5
+ - qcom,msm8974-mdp5
+ - qcom,msm8976-mdp5
+ - qcom,msm8994-mdp5
+ - qcom,msm8996-mdp5
+ - qcom,sdm630-mdp5
+ - qcom,sdm660-mdp5
+ - const: qcom,mdp5
+
+ $nodename:
+ pattern: '^display-controller@[0-9a-f]+$'
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: mdp_phys
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 4
+ maxItems: 7
+
+ clock-names:
+ oneOf:
+ - minItems: 4
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+ - const: lut
+ - const: tbu
+ - const: tbu_rt
+ # MSM8996 has additional iommu clock
+ - items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: iommu
+ - const: vsync
+
+ interconnects:
+ minItems: 1
+ items:
+ - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+ - description: Interconnect path from mdp1 port to the data bus
+ - description: Interconnect path from rotator port to the data bus
+
+ interconnect-names:
+ minItems: 1
+ items:
+ - const: mdp0-mem
+ - const: mdp1-mem
+ - const: rotator-mem
+
+ iommus:
+ items:
+ - description: apps SMMU with the Stream-ID mask for Hard-Fail port0
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2: true
+ opp-table:
+ type: object
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: >
+ Contains the list of output ports from DPU device. These ports
+ connect to interfaces that are external to the DPU hardware,
+ such as DSI, DP etc. MDP5 devices support up to 4 ports:
+ one or two DSI ports, HDMI and eDP.
+
+ patternProperties:
+ "^port@[0-3]+$":
+ $ref: /schemas/graph.yaml#/properties/port
+
+ # at least one port is required
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ display-controller@1a01000 {
+ compatible = "qcom,mdp5";
+ reg = <0x1a01000 0x90000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,mdss.yaml b/Bindings/display/msm/qcom,mdss.yaml
new file mode 100644
index 0000000..0999ea0
--- /dev/null
+++ b/Bindings/display/msm/qcom,mdss.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Mobile Display SubSystem (MDSS)
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+ - Rob Clark <robdclark@gmail.com>
+
+description:
+ This is the bindings documentation for the Mobile Display Subsystem(MDSS) that
+ encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc.
+
+properties:
+ $nodename:
+ pattern: "^display-subsystem@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - qcom,mdss
+
+ reg:
+ minItems: 2
+ maxItems: 3
+
+ reg-names:
+ minItems: 2
+ items:
+ - const: mdss_phys
+ - const: vbif_phys
+ - const: vbif_nrt_phys
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ power-domains:
+ maxItems: 1
+ description: |
+ The MDSS power domain provided by GCC
+
+ clocks:
+ oneOf:
+ - minItems: 3
+ items:
+ - description: Display abh clock
+ - description: Display axi clock
+ - description: Display vsync clock
+ - description: Display core clock
+ - minItems: 1
+ items:
+ - description: Display abh clock
+ - description: Display core clock
+
+ clock-names:
+ oneOf:
+ - minItems: 3
+ items:
+ - const: iface
+ - const: bus
+ - const: vsync
+ - const: core
+ - minItems: 1
+ items:
+ - const: iface
+ - const: core
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+ resets:
+ items:
+ - description: MDSS_CORE reset
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+ - power-domains
+ - clocks
+ - clock-names
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+patternProperties:
+ "^display-controller@[1-9a-f][0-9a-f]*$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ contains:
+ const: qcom,mdp5
+
+ "^dsi@[1-9a-f][0-9a-f]*$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ contains:
+ const: qcom,mdss-dsi-ctrl
+
+ "^phy@[1-9a-f][0-9a-f]*$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ enum:
+ - qcom,dsi-phy-14nm
+ - qcom,dsi-phy-14nm-660
+ - qcom,dsi-phy-14nm-8953
+ - qcom,dsi-phy-20nm
+ - qcom,dsi-phy-28nm-8226
+ - qcom,dsi-phy-28nm-hpm
+ - qcom,dsi-phy-28nm-lp
+ - qcom,hdmi-phy-8084
+ - qcom,hdmi-phy-8660
+ - qcom,hdmi-phy-8960
+ - qcom,hdmi-phy-8974
+ - qcom,hdmi-phy-8996
+
+ "^hdmi-tx@[1-9a-f][0-9a-f]*$":
+ type: object
+ additionalProperties: true
+ properties:
+ compatible:
+ enum:
+ - qcom,hdmi-tx-8084
+ - qcom,hdmi-tx-8660
+ - qcom,hdmi-tx-8960
+ - qcom,hdmi-tx-8974
+ - qcom,hdmi-tx-8994
+ - qcom,hdmi-tx-8996
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ display-subsystem@1a00000 {
+ compatible = "qcom,mdss";
+ reg = <0x1a00000 0x1000>,
+ <0x1ac8000 0x3000>;
+ reg-names = "mdss_phys", "vbif_phys";
+
+ power-domains = <&gcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "vsync";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@1a01000 {
+ compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
+ reg = <0x01a01000 0x89000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ iommus = <&apps_iommu 4>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,msm8998-dpu.yaml b/Bindings/display/msm/qcom,msm8998-dpu.yaml
new file mode 100644
index 0000000..d5a64c8
--- /dev/null
+++ b/Bindings/display/msm/qcom,msm8998-dpu.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on MSM8998
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,msm8998-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for regdma register set
+ - description: Address offset and size for vbif register set
+ - description: Address offset and size for non-realtime vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: regdma
+ - const: vbif
+ - const: vbif_nrt
+
+ clocks:
+ items:
+ - description: Display ahb clock
+ - description: Display axi clock
+ - description: Display mem-noc clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: mnoc
+ - const: core
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@c901000 {
+ compatible = "qcom,msm8998-dpu";
+ reg = <0x0c901000 0x8f000>,
+ <0x0c9a8e00 0xf0>,
+ <0x0c9b0000 0x2008>,
+ <0x0c9b8000 0x1040>;
+ reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MNOC_AHB_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDMX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,msm8998-mdss.yaml b/Bindings/display/msm/qcom,msm8998-mdss.yaml
new file mode 100644
index 0000000..2d9edab
--- /dev/null
+++ b/Bindings/display/msm/qcom,msm8998-mdss.yaml
@@ -0,0 +1,278 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8998 Display MDSS
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for MSM8998 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,msm8998-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock
+ - description: Display AXI clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,msm8998-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,msm8998-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,dsi-phy-10nm-8998
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@c900000 {
+ compatible = "qcom,msm8998-mdss";
+ reg = <0x0c900000 0x1000>;
+ reg-names = "mdss";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "core";
+
+ #address-cells = <1>;
+ #interrupt-cells = <1>;
+ #size-cells = <1>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ iommus = <&mmss_smmu 0>;
+
+ power-domains = <&mmcc MDSS_GDSC>;
+ ranges;
+
+ display-controller@c901000 {
+ compatible = "qcom,msm8998-dpu";
+ reg = <0x0c901000 0x8f000>,
+ <0x0c9a8e00 0xf0>,
+ <0x0c9b0000 0x2008>,
+ <0x0c9b8000 0x1040>;
+ reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MNOC_AHB_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDMX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+
+ dsi@c994000 {
+ compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0c994000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_BYTE0_INTF_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@c994400 {
+ compatible = "qcom,dsi-phy-10nm-8998";
+ reg = <0x0c994400 0x200>,
+ <0x0c994600 0x280>,
+ <0x0c994a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+
+ vdds-supply = <&pm8998_l1>;
+ };
+
+ dsi@c996000 {
+ compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0c996000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&mmcc MDSS_BYTE1_CLK>,
+ <&mmcc MDSS_BYTE1_INTF_CLK>,
+ <&mmcc MDSS_PCLK1_CLK>,
+ <&mmcc MDSS_ESC1_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@c996400 {
+ compatible = "qcom,dsi-phy-10nm-8998";
+ reg = <0x0c996400 0x200>,
+ <0x0c996600 0x280>,
+ <0x0c996a00 0x10e>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+
+ vdds-supply = <&pm8998_l1>;
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,qcm2290-dpu.yaml b/Bindings/display/msm/qcom,qcm2290-dpu.yaml
new file mode 100644
index 0000000..be6cd8a
--- /dev/null
+++ b/Bindings/display/msm/qcom,qcm2290-dpu.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on QCM2290
+
+maintainers:
+ - Loic Poulain <loic.poulain@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,qcm2290-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display AXI clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock from dispcc
+ - description: Display lut clock from dispcc
+ - description: Display vsync clock from dispcc
+
+ clock-names:
+ items:
+ - const: bus
+ - const: iface
+ - const: core
+ - const: lut
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+ #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@5e01000 {
+ compatible = "qcom,qcm2290-dpu";
+ reg = <0x05e01000 0x8f000>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "core", "lut", "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,qcm2290-mdss.yaml b/Bindings/display/msm/qcom,qcm2290-mdss.yaml
new file mode 100644
index 0000000..5ad1556
--- /dev/null
+++ b/Bindings/display/msm/qcom,qcm2290-mdss.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM220 Display MDSS
+
+maintainers:
+ - Loic Poulain <loic.poulain@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+ are mentioned for QCM2290 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,qcm2290-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AXI clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+
+ iommus:
+ maxItems: 2
+
+ interconnects:
+ maxItems: 1
+
+ interconnect-names:
+ maxItems: 1
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,qcm2290-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,dsi-ctrl-6g-qcm2290
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,dsi-phy-14nm-2290
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+ #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,qcm2290.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@5e00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,qcm2290-mdss";
+ reg = <0x05e00000 0x1000>;
+ reg-names = "mdss";
+ power-domains = <&dispcc MDSS_GDSC>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "core";
+
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
+ interconnect-names = "mdp0-mem";
+
+ iommus = <&apps_smmu 0x420 0x2>,
+ <&apps_smmu 0x421 0x0>;
+ ranges;
+
+ display-controller@5e01000 {
+ compatible = "qcom,qcm2290-dpu";
+ reg = <0x05e01000 0x8f000>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "core", "lut", "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi@5e94000 {
+ compatible = "qcom,dsi-ctrl-6g-qcm2290";
+ reg = <0x05e94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd QCM2290_VDDCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@5e94400 {
+ compatible = "qcom,dsi-phy-14nm-2290";
+ reg = <0x05e94400 0x100>,
+ <0x05e94500 0x300>,
+ <0x05e94800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+ vcca-supply = <&vreg_dsi_phy>;
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sc7180-dpu.yaml b/Bindings/display/msm/qcom,sc7180-dpu.yaml
new file mode 100644
index 0000000..8137618
--- /dev/null
+++ b/Bindings/display/msm/qcom,sc7180-dpu.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SC7180
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7180-dpu
+ - qcom,sm6125-dpu
+ - qcom,sm6350-dpu
+ - qcom,sm6375-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ minItems: 6
+ items:
+ - description: Display hf axi clock
+ - description: Display ahb clock
+ - description: Display rotator clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+ - description: Display core throttle clock
+
+ clock-names:
+ minItems: 6
+ items:
+ - const: bus
+ - const: iface
+ - const: rot
+ - const: lut
+ - const: core
+ - const: vsync
+ - const: throttle
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sm6375-dpu
+ - qcom,sm6125-dpu
+
+ then:
+ properties:
+ clocks:
+ minItems: 7
+
+ clock-names:
+ minItems: 7
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc7180-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "rot", "lut", "core",
+ "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sc7180-mdss.yaml b/Bindings/display/msm/qcom,sc7180-mdss.yaml
new file mode 100644
index 0000000..3432a24
--- /dev/null
+++ b/Bindings/display/msm/qcom,sc7180-mdss.yaml
@@ -0,0 +1,316 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 Display MDSS
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SC7180 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc7180-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 1
+
+ interconnect-names:
+ maxItems: 1
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sc7180-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sc7180-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sc7180-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,dsi-phy-10nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sdm845.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,sc7180-mdss";
+ reg = <0xae00000 0x1000>;
+ reg-names = "mdss";
+ power-domains = <&dispcc MDSS_GDSC>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "ahb", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "mdp0-mem";
+
+ iommus = <&apps_smmu 0x800 0x2>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc7180-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "rot", "lut", "core",
+ "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SC7180_CX>;
+
+ phys = <&dsi_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+
+ displayport-controller@ae90000 {
+ compatible = "qcom,sc7180-dp";
+
+ reg = <0xae90000 0x200>,
+ <0xae90200 0x200>,
+ <0xae90400 0xc00>,
+ <0xae91000 0x400>,
+ <0xae91400 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface", "core_aux", "ctrl_link",
+ "ctrl_link_iface", "stream_pixel";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SC7180_CX>;
+
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dp_out: endpoint { };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sc7280-dpu.yaml b/Bindings/display/msm/qcom,sc7280-dpu.yaml
new file mode 100644
index 0000000..b0fbe86
--- /dev/null
+++ b/Bindings/display/msm/qcom,sc7280-dpu.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SC7280
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc7280-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display ahb clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc7280-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SC7280_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&edp_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sc7280-mdss.yaml b/Bindings/display/msm/qcom,sc7280-mdss.yaml
new file mode 100644
index 0000000..bbb7278
--- /dev/null
+++ b/Bindings/display/msm/qcom,sc7280-mdss.yaml
@@ -0,0 +1,437 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 Display MDSS
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SC7280.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc7280-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 1
+
+ interconnect-names:
+ maxItems: 1
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sc7280-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sc7280-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sc7280-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^edp@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sc7280-edp
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ enum:
+ - qcom,sc7280-dsi-phy-7nm
+ - qcom,sc7280-edp-phy
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sc7280.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,sc7280-mdss";
+ reg = <0xae00000 0x1000>;
+ reg-names = "mdss";
+ power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+ interconnect-names = "mdp0-mem";
+
+ iommus = <&apps_smmu 0x900 0x402>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc7280-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SC7280_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf5_out: endpoint {
+ remote-endpoint = <&edp_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sc7280-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ phys = <&mdss_dsi_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi_phy: phy@ae94400 {
+ compatible = "qcom,sc7280-dsi-phy-7nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x280>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ vdds-supply = <&vreg_dsi_supply>;
+ };
+
+ edp@aea0000 {
+ compatible = "qcom,sc7280-edp";
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_hot_plug_det>;
+
+ reg = <0xaea0000 0x200>,
+ <0xaea0200 0x200>,
+ <0xaea0400 0xc00>,
+ <0xaea1000 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <14>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+ phys = <&mdss_edp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&edp_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ edp_in: endpoint {
+ remote-endpoint = <&dpu_intf5_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_edp_out: endpoint { };
+ };
+ };
+
+ edp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_edp_phy: phy@aec2a00 {
+ compatible = "qcom,sc7280-edp-phy";
+
+ reg = <0xaec2a00 0x19c>,
+ <0xaec2200 0xa0>,
+ <0xaec2600 0xa0>,
+ <0xaec2000 0x1c0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_EDP_CLKREF_EN>;
+ clock-names = "aux",
+ "cfg_ahb";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ };
+
+ displayport-controller@ae90000 {
+ compatible = "qcom,sc7280-dp";
+
+ reg = <0xae90000 0x200>,
+ <0xae90200 0x200>,
+ <0xae90400 0xc00>,
+ <0xae91000 0x400>,
+ <0xae91400 0x400>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+ phys = <&dp_phy>;
+ phy-names = "dp";
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SC7280_CX>;
+
+ #sound-dai-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dp_out: endpoint { };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sc8280xp-dpu.yaml b/Bindings/display/msm/qcom,sc8280xp-dpu.yaml
new file mode 100644
index 0000000..d19e3be
--- /dev/null
+++ b/Bindings/display/msm/qcom,sc8280xp-dpu.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Display Processing Unit
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ Device tree bindings for SC8280XP Display Processing Unit.
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display ahb clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <460000000>,
+ <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp2_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Bindings/display/msm/qcom,sc8280xp-mdss.yaml
new file mode 100644
index 0000000..af79406
--- /dev/null
+++ b/Bindings/display/msm/qcom,sc8280xp-mdss.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Mobile Display Subsystem
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sc8280xp-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ enum:
+ - qcom,sc8280xp-dp
+ - qcom,sc8280xp-edp
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sc8280xp-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc0 MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ iommus = <&apps_smmu 0x1000 0x402>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sc8280xp-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdss0_mdp_opp_table>;
+ power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+ interrupt-parent = <&mdss0>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+ endpoint {
+ remote-endpoint = <&mdss0_dp2_in>;
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sdm845-dpu.yaml b/Bindings/display/msm/qcom,sdm845-dpu.yaml
new file mode 100644
index 0000000..b917064
--- /dev/null
+++ b/Bindings/display/msm/qcom,sdm845-dpu.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SDM845
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sdm845-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display GCC bus clock
+ - description: Display ahb clock
+ - description: Display axi clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: gcc-bus
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sdm845-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sdm845-mdss.yaml b/Bindings/display/msm/qcom,sdm845-mdss.yaml
new file mode 100644
index 0000000..6e8b69e
--- /dev/null
+++ b/Bindings/display/msm/qcom,sdm845-mdss.yaml
@@ -0,0 +1,288 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 Display MDSS
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SDM845 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sdm845-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: core
+
+ iommus:
+ maxItems: 2
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sdm845-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sdm845-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sdm845-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,dsi-phy-10nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,sdm845-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x880 0x8>,
+ <&apps_smmu 0xc80 0x8>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sdm845-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ power-domains = <&rpmhpd SDM845_CX>;
+ operating-points-v2 = <&mdp_opp_table>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SDM845_CX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SDM845_CX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae96400 0x200>,
+ <0x0ae96600 0x280>,
+ <0x0ae96a00 0x10e>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm6115-dpu.yaml b/Bindings/display/msm/qcom,sm6115-dpu.yaml
new file mode 100644
index 0000000..510eb6c
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm6115-dpu.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SM6115
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6115-dpu
+
+ reg:
+ items:
+ - description: MDP register set
+ - description: VBIF register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display AXI
+ - description: Display AHB
+ - description: Display core
+ - description: Display lut
+ - description: Display rotator
+ - description: Display vsync
+
+ clock-names:
+ items:
+ - const: bus
+ - const: iface
+ - const: core
+ - const: lut
+ - const: rot
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+ #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@5e01000 {
+ compatible = "qcom,sm6115-dpu";
+ reg = <0x05e01000 0x8f000>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd SM6115_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm6115-mdss.yaml b/Bindings/display/msm/qcom,sm6115-mdss.yaml
new file mode 100644
index 0000000..dde5c2a
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm6115-mdss.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 Display MDSS
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+ are mentioned for SM6115 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6115-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AXI clock
+ - description: Display core clock
+
+ iommus:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm6115-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: qcom,sm6115-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+ - description: Old binding, please don't use
+ deprecated: true
+ const: qcom,dsi-ctrl-6g-qcm2290
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,dsi-phy-14nm-2290
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+ #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@5e00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,sm6115-mdss";
+ reg = <0x05e00000 0x1000>;
+ reg-names = "mdss";
+ power-domains = <&dispcc MDSS_GDSC>;
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x420 0x2>,
+ <&apps_smmu 0x421 0x0>;
+ ranges;
+
+ display-controller@5e01000 {
+ compatible = "qcom,sm6115-dpu";
+ reg = <0x05e01000 0x8f000>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd SM6115_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi@5e94000 {
+ compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x05e94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd SM6115_VDDCX>;
+ phys = <&dsi0_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@5e94400 {
+ compatible = "qcom,dsi-phy-14nm-2290";
+ reg = <0x05e94400 0x100>,
+ <0x05e94500 0x300>,
+ <0x05e94800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm6125-mdss.yaml b/Bindings/display/msm/qcom,sm6125-mdss.yaml
new file mode 100644
index 0000000..671c2c2
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm6125-mdss.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6125 Display MDSS
+
+maintainers:
+ - Marijn Suijten <marijn.suijten@somainline.org>
+
+description:
+ SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+ like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6125-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm6125-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm6125-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm6125-dsi-phy-14nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm6125.h>
+ #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@5e00000 {
+ compatible = "qcom,sm6125-mdss";
+ reg = <0x05e00000 0x1000>;
+ reg-names = "mdss";
+
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface",
+ "ahb",
+ "core";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ iommus = <&apps_smmu 0x400 0x0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@5e01000 {
+ compatible = "qcom,sm6125-dpu";
+ reg = <0x05e01000 0x83208>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+ clock-names = "bus",
+ "iface",
+ "rot",
+ "lut",
+ "core",
+ "vsync",
+ "throttle";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd SM6125_VDDCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi@5e94000 {
+ compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x05e94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd SM6125_VDDCX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ phy@5e94400 {
+ compatible = "qcom,sm6125-dsi-phy-14nm";
+ reg = <0x05e94400 0x100>,
+ <0x05e94500 0x300>,
+ <0x05e94800 0x188>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface",
+ "ref";
+
+ required-opps = <&rpmpd_opp_nom>;
+ power-domains = <&rpmpd SM6125_VDDMX>;
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm6350-mdss.yaml b/Bindings/display/msm/qcom,sm6350-mdss.yaml
new file mode 100644
index 0000000..e1dcb45
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm6350-mdss.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 Display MDSS
+
+maintainers:
+ - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+ SM6350 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+ like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6350-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AXI clock from gcc
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm6350-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm6350-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,dsi-phy-10nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm6350.h>
+ #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm6350-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x800 0x2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm6350-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus", "iface", "rot", "lut", "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>;
+ assigned-clock-rates = <300000000>,
+ <19200000>,
+ <19200000>,
+ <19200000>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM6350_CX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM6350_MX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-10nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94a00 0x1e0>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm6375-mdss.yaml b/Bindings/display/msm/qcom,sm6375-mdss.yaml
new file mode 100644
index 0000000..b15c395
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm6375-mdss.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6375 Display MDSS
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description:
+ SM6375 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+ like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6375-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm6375-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm6375-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm6375-dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+ #include <dt-bindings/clock/qcom,sm6375-dispcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@5e00000 {
+ compatible = "qcom,sm6375-mdss";
+ reg = <0x05e00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "ahb", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x820 0x2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@5e01000 {
+ compatible = "qcom,sm6375-dpu";
+ reg = <0x05e01000 0x8e030>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+ clock-names = "bus",
+ "iface",
+ "rot",
+ "lut",
+ "core",
+ "vsync",
+ "throttle";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi@5e94000 {
+ compatible = "qcom,sm6375-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x05e94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd SM6375_VDDMX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@5e94400 {
+ compatible = "qcom,sm6375-dsi-phy-7nm";
+ reg = <0x05e94400 0x200>,
+ <0x05e94600 0x280>,
+ <0x05e94900 0x264>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm8150-dpu.yaml b/Bindings/display/msm/qcom,sm8150-dpu.yaml
new file mode 100644
index 0000000..13146b3
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8150-dpu.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 Display DPU
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8150-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display ahb clock
+ - description: Display hf axi clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8150.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8150-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm8150-mdss.yaml b/Bindings/display/msm/qcom,sm8150-mdss.yaml
new file mode 100644
index 0000000..a2a8be7
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8150-mdss.yaml
@@ -0,0 +1,338 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 Display MDSS
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SM8150 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm8150-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: nrt_bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm8150-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8150-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8150.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8150-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+ <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x800 0x420>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8150-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-171428571 {
+ opp-hz = /bits/ 64 <171428571>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae96400 0x200>,
+ <0x0ae96600 0x280>,
+ <0x0ae96900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm8250-dpu.yaml b/Bindings/display/msm/qcom,sm8250-dpu.yaml
new file mode 100644
index 0000000..ffa5047
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8250-dpu.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display DPU
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8250-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display ahb clock
+ - description: Display hf axi clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8250.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8250-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm8250-mdss.yaml b/Bindings/display/msm/qcom,sm8250-mdss.yaml
new file mode 100644
index 0000000..9949759
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -0,0 +1,340 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display MDSS
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+ Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+ sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+ bindings of MDSS are mentioned for SM8250 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8250-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: nrt_bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm8250-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8250-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,dsi-phy-7nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8250.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8250-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+ <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x820 0x402>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8250-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-7nm";
+ reg = <0x0ae96400 0x200>,
+ <0x0ae96600 0x280>,
+ <0x0ae96900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm8350-dpu.yaml b/Bindings/display/msm/qcom,sm8350-dpu.yaml
new file mode 100644
index 0000000..96ef2d9
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8350-dpu.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display DPU
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8350-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display ahb clock
+ - description: Display lut clock
+ - description: Display core clock
+ - description: Display vsync clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8350.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8350-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm8350-mdss.yaml b/Bindings/display/msm/qcom,sm8350-mdss.yaml
new file mode 100644
index 0000000..163fc83
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display MDSS
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+
+description:
+ MSM Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm8350-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display hf axi clock
+ - description: Display sf axi clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: nrt_bus
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: mdp0-mem
+ - const: mdp1-mem
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm8350-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm8350-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8350-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm8350-dsi-phy-5nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8350.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8350-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+ <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ iommus = <&apps_smmu 0x820 0x402>;
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8350-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi0: dsi@ae94000 {
+ compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dsi0_phy>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm8450-dpu.yaml b/Bindings/display/msm/qcom,sm8450-dpu.yaml
new file mode 100644
index 0000000..2a5d3da
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8450-dpu.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 Display DPU
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8450-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display hf axi
+ - description: Display sf axi
+ - description: Display ahb
+ - description: Display lut
+ - description: Display core
+ - description: Display vsync
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8450.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8450-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-172000000{
+ opp-hz = /bits/ 64 <172000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm8450-mdss.yaml b/Bindings/display/msm/qcom,sm8450-mdss.yaml
new file mode 100644
index 0000000..001b26e
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -0,0 +1,361 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 Display MDSS
+
+maintainers:
+ - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+ SM8450 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8450-mdss
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display sf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm8450-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8450-dp
+ - const: qcom,sm8350-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8450-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm8450-dsi-phy-5nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8450.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8450-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
+ <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x2800 0x402>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8450-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-172000000{
+ opp-hz = /bits/ 64 <172000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160310000{
+ opp-hz = /bits/ 64 <160310000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,sm8450-dsi-phy-5nm";
+ reg = <0x0ae94400 0x200>,
+ <0x0ae94600 0x280>,
+ <0x0ae94900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,sm8450-dsi-phy-5nm";
+ reg = <0x0ae96400 0x200>,
+ <0x0ae96600 0x280>,
+ <0x0ae96900 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ vdds-supply = <&vreg_dsi_phy>;
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm8550-dpu.yaml b/Bindings/display/msm/qcom,sm8550-dpu.yaml
new file mode 100644
index 0000000..16a541f
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8550-dpu.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display DPU
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8550-dpu
+
+ reg:
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
+
+ reg-names:
+ items:
+ - const: mdp
+ - const: vbif
+
+ clocks:
+ items:
+ - description: Display AHB
+ - description: Display hf axi
+ - description: Display MDSS ahb
+ - description: Display lut
+ - description: Display core
+ - description: Display vsync
+
+ clock-names:
+ items:
+ - const: bus
+ - const: nrt_bus
+ - const: iface
+ - const: lut
+ - const: core
+ - const: vsync
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+ #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8550-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+...
diff --git a/Bindings/display/msm/qcom,sm8550-mdss.yaml b/Bindings/display/msm/qcom,sm8550-mdss.yaml
new file mode 100644
index 0000000..1ea50a2
--- /dev/null
+++ b/Bindings/display/msm/qcom,sm8550-mdss.yaml
@@ -0,0 +1,349 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display MDSS
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+ SM8550 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+ DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8550-mdss
+
+ clocks:
+ items:
+ - description: Display MDSS AHB
+ - description: Display AHB
+ - description: Display hf AXI
+ - description: Display core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm8550-dpu
+
+ "^displayport-controller@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8550-dp
+ - const: qcom,sm8350-dp
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm8550-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ additionalProperties: true
+
+ properties:
+ compatible:
+ const: qcom,sm8550-dsi-phy-4nm
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+ #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
+
+ display-subsystem@ae00000 {
+ compatible = "qcom,sm8550-mdss";
+ reg = <0x0ae00000 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+ <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x1c00 0x2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@ae01000 {
+ compatible = "qcom,sm8550-dpu";
+ reg = <0x0ae01000 0x8f000>,
+ <0x0aeb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "bus",
+ "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-325000000 {
+ opp-hz = /bits/ 64 <325000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-375000000 {
+ opp-hz = /bits/ 64 <375000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-514000000 {
+ opp-hz = /bits/ 64 <514000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ dsi@ae94000 {
+ compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ dsi0_phy: phy@ae94400 {
+ compatible = "qcom,sm8550-dsi-phy-4nm";
+ reg = <0x0ae95000 0x200>,
+ <0x0ae95200 0x280>,
+ <0x0ae95500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+
+ dsi@ae96000 {
+ compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0ae96000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&dsi1_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi1_phy: phy@ae96400 {
+ compatible = "qcom,sm8550-dsi-phy-4nm";
+ reg = <0x0ae97000 0x200>,
+ <0x0ae97200 0x280>,
+ <0x0ae97500 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+ };
+ };
+...
diff --git a/Bindings/display/multi-inno,mi0283qt.txt b/Bindings/display/multi-inno,mi0283qt.txt
new file mode 100644
index 0000000..eed48c3
--- /dev/null
+++ b/Bindings/display/multi-inno,mi0283qt.txt
@@ -0,0 +1,27 @@
+Multi-Inno MI0283QT display panel
+
+Required properties:
+- compatible: "multi-inno,mi0283qt".
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- dc-gpios: D/C pin. The presence/absence of this GPIO determines
+ the panel interface mode (IM[3:0] pins):
+ - present: IM=x110 4-wire 8-bit data serial interface
+ - absent: IM=x101 3-wire 9-bit data serial interface
+- reset-gpios: Reset pin
+- power-supply: A regulator node for the supply voltage.
+- backlight: phandle of the backlight device attached to the panel
+- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+ mi0283qt@0{
+ compatible = "multi-inno,mi0283qt";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ rotation = <90>;
+ dc-gpios = <&gpio 25 0>;
+ backlight = <&backlight>;
+ };
diff --git a/Bindings/display/panel/abt,y030xx067a.yaml b/Bindings/display/panel/abt,y030xx067a.yaml
new file mode 100644
index 0000000..acd2f3f
--- /dev/null
+++ b/Bindings/display/panel/abt,y030xx067a.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/abt,y030xx067a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: abt,y030xx067a
+
+ backlight: true
+ port: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+
+required:
+ - compatible
+ - reg
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "abt,y030xx067a";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/advantech,idk-1110wr.yaml b/Bindings/display/panel/advantech,idk-1110wr.yaml
new file mode 100644
index 0000000..f6fea90
--- /dev/null
+++ b/Bindings/display/panel/advantech,idk-1110wr.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/advantech,idk-1110wr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech IDK-1110WR 10.1" WSVGA LVDS Display Panel
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: advantech,idk-1110wr
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: advantech,idk-1110wr
+ - const: panel-lvds
+
+ data-mapping:
+ const: jeida-24
+
+ width-mm:
+ const: 223
+
+ height-mm:
+ const: 125
+
+ panel-timing: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+ - port
+
+examples:
+ - |+
+ panel {
+ compatible = "advantech,idk-1110wr", "panel-lvds";
+
+ width-mm = <223>;
+ height-mm = <125>;
+
+ data-mapping = "jeida-24";
+
+ panel-timing {
+ /* 1024x600 @60Hz */
+ clock-frequency = <51200000>;
+ hactive = <1024>;
+ vactive = <600>;
+ hsync-len = <240>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ vsync-len = <10>;
+ vfront-porch = <15>;
+ vback-porch = <10>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_encoder>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/advantech,idk-2121wr.yaml b/Bindings/display/panel/advantech,idk-2121wr.yaml
new file mode 100644
index 0000000..2e8dbdb
--- /dev/null
+++ b/Bindings/display/panel/advantech,idk-2121wr.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/advantech,idk-2121wr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech IDK-2121WR 21.5" Full-HD dual-LVDS panel
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+ The IDK-2121WR from Advantech is a Full-HD dual-LVDS panel.
+ A dual-LVDS interface is a dual-link connection with even pixels traveling
+ on one link, and with odd pixels traveling on the other link.
+
+ The panel expects odd pixels on the first port, and even pixels on the
+ second port, therefore the ports must be marked accordingly (with either
+ dual-lvds-odd-pixels or dual-lvds-even-pixels).
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: advantech,idk-2121wr
+ - {} # panel-lvds, but not listed here to avoid false select
+
+ width-mm:
+ const: 476
+
+ height-mm:
+ const: 268
+
+ data-mapping:
+ const: vesa-24
+
+ panel-timing: true
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: The sink for odd pixels.
+ properties:
+ dual-lvds-odd-pixels: true
+
+ required:
+ - dual-lvds-odd-pixels
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: The sink for even pixels.
+ properties:
+ dual-lvds-even-pixels: true
+
+ required:
+ - dual-lvds-even-pixels
+
+ required:
+ - port@0
+ - port@1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - width-mm
+ - height-mm
+ - data-mapping
+ - panel-timing
+ - ports
+
+examples:
+ - |+
+ panel-lvds {
+ compatible = "advantech,idk-2121wr", "panel-lvds";
+
+ width-mm = <476>;
+ height-mm = <268>;
+
+ data-mapping = "vesa-24";
+
+ panel-timing {
+ clock-frequency = <148500000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hsync-len = <44>;
+ hfront-porch = <88>;
+ hback-porch = <148>;
+ vfront-porch = <4>;
+ vback-porch = <36>;
+ vsync-len = <5>;
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dual-lvds-odd-pixels;
+ panel_in0: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dual-lvds-even-pixels;
+ panel_in1: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/arm,rtsm-display.yaml b/Bindings/display/panel/arm,rtsm-display.yaml
new file mode 100644
index 0000000..4ad484f
--- /dev/null
+++ b/Bindings/display/panel/arm,rtsm-display.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,rtsm-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm RTSM Virtual Platforms Display
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: arm,rtsm-display
+
+ port: true
+
+required:
+ - compatible
+ - port
+
+additionalProperties: false
+
+...
diff --git a/Bindings/display/panel/arm,versatile-tft-panel.yaml b/Bindings/display/panel/arm,versatile-tft-panel.yaml
new file mode 100644
index 0000000..c9958f8
--- /dev/null
+++ b/Bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,versatile-tft-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile TFT Panels
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ These panels are connected to the daughterboards found on the
+ ARM Versatile reference designs.
+
+ This device node must appear as a child to a "syscon"-compatible
+ node.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: arm,versatile-tft-panel
+
+ port: true
+
+required:
+ - compatible
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ sysreg@0 {
+ compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
+ reg = <0x00000 0x1000>;
+
+ panel {
+ compatible = "arm,versatile-tft-panel";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&foo>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/armadeus,st0700-adapt.yaml b/Bindings/display/panel/armadeus,st0700-adapt.yaml
new file mode 100644
index 0000000..a6ade47
--- /dev/null
+++ b/Bindings/display/panel/armadeus,st0700-adapt.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/armadeus,st0700-adapt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Armadeus ST0700 Adapter
+
+description:
+ A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with an adapter board.
+
+maintainers:
+ - '"Sébastien Szymanski" <sebastien.szymanski@armadeus.com>'
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: armadeus,st0700-adapt
+
+ power-supply: true
+ backlight: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+...
diff --git a/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
new file mode 100644
index 0000000..75a09df
--- /dev/null
+++ b/Bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/asus,z00t-tm5p5-nt35596.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASUS Z00T TM5P5 NT35596 5.5" 1080×1920 LCD Panel
+
+maintainers:
+ - Konrad Dybcio <konradybcio@gmail.com>
+
+description: |+
+ This panel seems to only be found in the Asus Z00T
+ smartphone and we have no straightforward way of
+ actually getting the correct model number,
+ as no schematics are released publicly.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: asus,z00t-tm5p5-n35596
+ reg: true
+ reset-gpios: true
+ vdd-supply:
+ description: core voltage supply
+ vddio-supply:
+ description: vddio supply
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vddio-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ reg = <0>;
+
+ compatible = "asus,z00t-tm5p5-n35596";
+
+ vdd-supply = <&pm8916_l8>;
+ vddio-supply = <&pm8916_l6>;
+ reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Bindings/display/panel/auo,a030jtn01.yaml b/Bindings/display/panel/auo,a030jtn01.yaml
new file mode 100644
index 0000000..86c834e
--- /dev/null
+++ b/Bindings/display/panel/auo,a030jtn01.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+description: |
+ Delta RGB 8-bit panel found in some Retrogame handhelds
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+ - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: auo,a030jtn01
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "auo,a030jtn01";
+ reg = <0>;
+
+ spi-max-frequency = <10000000>;
+
+ reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+ power-supply = <&lcd_power>;
+
+ backlight = <&backlight>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/bananapi,s070wv20-ct16.yaml b/Bindings/display/panel/bananapi,s070wv20-ct16.yaml
new file mode 100644
index 0000000..bbf127f
--- /dev/null
+++ b/Bindings/display/panel/bananapi,s070wv20-ct16.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/bananapi,s070wv20-ct16.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Banana Pi 7" (S070WV20-CT16) TFT LCD Panel
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: bananapi,s070wv20-ct16
+
+ power-supply: true
+ backlight: true
+ enable-gpios: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+...
diff --git a/Bindings/display/panel/boe,bf060y8m-aj0.yaml b/Bindings/display/panel/boe,bf060y8m-aj0.yaml
new file mode 100644
index 0000000..a8f3afa
--- /dev/null
+++ b/Bindings/display/panel/boe,bf060y8m-aj0.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+ This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED
+ video mode panel module on MIPI-DSI 4-Lane interface, GGRB
+ pixel arrangement, 63 micrometers pitch, with an active
+ area of 68.04 x 136.08 millimeters.
+ Each pixel is divided into red and green dots, or blue and
+ green dots, and two pixels share red or blue dots which are
+ arranged in vertical stripe.
+ The DriverIC for this panel module is SW43404.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: boe,bf060y8m-aj0
+
+ elvdd-supply:
+ description: EL Driving positive (VDD) supply (4.40-4.80V)
+ elvss-supply:
+ description: EL Driving negative (VSS) supply (-5.00V to -1.40V)
+ vcc-supply:
+ description: Core (TSP) voltage supply (2.70-3.60V)
+ vci-supply:
+ description: DriverIC Operation supply (2.60-3.60V)
+ vddio-supply:
+ description: I/O voltage supply (1.62-1.98V)
+
+ port: true
+ reg: true
+ reset-gpios: true
+
+required:
+ - compatible
+ - elvdd-supply
+ - elvss-supply
+ - vcc-supply
+ - vci-supply
+ - vddio-supply
+ - reg
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "boe,bf060y8m-aj0";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+ vcc-supply = <&disp_vcc_vreg>;
+ vddio-supply = <&disp_vddio_vreg>;
+ vci-supply = <&disp_vci_vreg>;
+ elvdd-supply = <&disp_elvdd_vreg>;
+ elvss-supply = <&disp_elvss_vreg>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/boe,himax8279d.yaml b/Bindings/display/panel/boe,himax8279d.yaml
new file mode 100644
index 0000000..272a3a0
--- /dev/null
+++ b/Bindings/display/panel/boe,himax8279d.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,himax8279d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Boe Himax8279d 1200x1920 TFT LCD panel
+
+maintainers:
+ - Jerry Han <jerry.han.hq@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: boe,himax8279d8p
+ - const: boe,himax8279d10p
+
+ backlight: true
+ enable-gpios: true
+ reg: true
+
+ pp33-gpios:
+ maxItems: 1
+ description: GPIO for the 3.3v pin that provides the supply voltage
+
+ pp18-gpios:
+ maxItems: 1
+ description: GPIO for the 1.8v pin that provides the supply voltage
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp33-gpios
+ - pp18-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "boe,himax8279d8p", "boe,himax8279d10p";
+ reg = <0>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+ pp33-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+ pp18-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/boe,tv101wum-nl6.yaml b/Bindings/display/panel/boe,tv101wum-nl6.yaml
new file mode 100644
index 0000000..906ef62
--- /dev/null
+++ b/Bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-NL6 DSI Display Panel
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel
+ - boe,tv101wum-nl6
+ # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel
+ - auo,kd101n80-45na
+ # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel
+ - boe,tv101wum-n53
+ # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel
+ - auo,b101uan08.3
+ # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel
+ - boe,tv105wum-nw0
+ # BOE TV110C9M-LL3 10.95" WUXGA TFT LCD panel
+ - boe,tv110c9m-ll3
+ # INX HJ110IZ-01A 10.95" WUXGA TFT LCD panel
+ - innolux,hj110iz-01a
+ # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel
+ - starry,2081101qfh032011-53g
+ # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
+ - starry,himax83102-j02
+ # STARRY ili9882t 10.51" WUXGA TFT LCD panel
+ - starry,ili9882t
+
+ reg:
+ description: the virtual channel number of a DSI peripheral
+
+ enable-gpios:
+ description: a GPIO spec for the enable pin
+
+ pp1800-supply:
+ description: core voltage supply
+
+ pp3300-supply:
+ description: core voltage supply
+
+ avdd-supply:
+ description: phandle of the regulator that provides positive voltage
+
+ avee-supply:
+ description: phandle of the regulator that provides negative voltage
+
+ backlight:
+ description: phandle of the backlight device attached to the panel
+
+ port: true
+ rotation: true
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - pp1800-supply
+ - avdd-supply
+ - avee-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "boe,tv101wum-nl6";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/display-timing.txt b/Bindings/display/panel/display-timing.txt
new file mode 100644
index 0000000..7f55ad4
--- /dev/null
+++ b/Bindings/display/panel/display-timing.txt
@@ -0,0 +1 @@
+See display-timings.yaml in this directory.
diff --git a/Bindings/display/panel/display-timings.yaml b/Bindings/display/panel/display-timings.yaml
new file mode 100644
index 0000000..dc5f7e3
--- /dev/null
+++ b/Bindings/display/panel/display-timings.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: display timings
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+ A display panel may be able to handle several display timings,
+ with different resolutions.
+ The display-timings node makes it possible to specify the timings
+ and to specify the timing that is native for the display.
+
+properties:
+ $nodename:
+ const: display-timings
+
+ native-mode:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ The default display timing is the one specified as native-mode.
+ If no native-mode is specified then the first node is assumed
+ to be the native mode.
+
+patternProperties:
+ "^timing":
+ type: object
+ $ref: panel-timing.yaml#
+
+additionalProperties: false
+
+examples:
+ - |+
+
+ /*
+ * Example that specifies panel timing using minimum, typical,
+ * maximum values as commonly used in datasheet description.
+ * timing1 is the native-mode.
+ */
+ display-timings {
+ native-mode = <&timing1>;
+ timing0 {
+ /* 1920x1080p24 */
+ clock-frequency = <148500000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hsync-len = <0 44 60>;
+ hfront-porch = <80 88 95>;
+ hback-porch = <100 148 160>;
+ vfront-porch = <0 4 6>;
+ vback-porch = <0 36 50>;
+ vsync-len = <0 5 6>;
+ };
+ timing1 {
+ /* 1920x1080p24 */
+ clock-frequency = <52000000>;
+ hactive = <1920>;
+ vactive = <1080>;
+ hfront-porch = <25>;
+ hback-porch = <25>;
+ hsync-len = <0 25 25>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/dlc,dlc0700yzg-1.yaml b/Bindings/display/panel/dlc,dlc0700yzg-1.yaml
new file mode 100644
index 0000000..287e2fe
--- /dev/null
+++ b/Bindings/display/panel/dlc,dlc0700yzg-1.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/dlc,dlc0700yzg-1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DLC Display Co. DLC0700YZG-1 7.0" WSVGA TFT LCD panel
+
+maintainers:
+ - Philipp Zabel <p.zabel@pengutronix.de>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: dlc,dlc0700yzg-1
+
+ reset-gpios: true
+ enable-gpios: true
+ backlight: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+...
diff --git a/Bindings/display/panel/ebbg,ft8719.yaml b/Bindings/display/panel/ebbg,ft8719.yaml
new file mode 100644
index 0000000..80deedc
--- /dev/null
+++ b/Bindings/display/panel/ebbg,ft8719.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ebbg,ft8719.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EBBG FT8719 MIPI-DSI LCD panel
+
+maintainers:
+ - Joel Selvaraj <jo@jsfamily.in>
+
+description: |
+ The FT8719 panel from EBBG is a FHD+ LCD display panel with a resolution
+ of 1080x2246. It is a video mode DSI panel. The backlight is managed
+ through the QCOM WLED driver.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: ebbg,ft8719
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel of the peripheral
+
+ vddio-supply:
+ description: power IC supply regulator
+
+ vddpos-supply:
+ description: positive boost supply regulator
+
+ vddneg-supply:
+ description: negative boost supply regulator
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - vddpos-supply
+ - vddneg-supply
+ - reset-gpios
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "ebbg,ft8719";
+ reg = <0>;
+
+ vddio-supply = <&vreg_l14a_1p88>;
+ vddpos-supply = <&lab>;
+ vddneg-supply = <&ibb>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ backlight = <&pmi8998_wled>;
+
+ port {
+ ebbg_ft8719_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/elida,kd35t133.yaml b/Bindings/display/panel/elida,kd35t133.yaml
new file mode 100644
index 0000000..265ab6d
--- /dev/null
+++ b/Bindings/display/panel/elida,kd35t133.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/elida,kd35t133.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elida KD35T133 3.5in 320x480 DSI panel
+
+maintainers:
+ - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: elida,kd35t133
+ reg: true
+ backlight: true
+ port: true
+ reset-gpios: true
+ rotation: true
+ iovcc-supply:
+ description: regulator that supplies the iovcc voltage
+ vdd-supply:
+ description: regulator that supplies the vdd voltage
+
+required:
+ - compatible
+ - reg
+ - backlight
+ - port
+ - iovcc-supply
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "elida,kd35t133";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_1v8>;
+ vdd-supply = <&vcc3v3_lcd>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/feixin,k101-im2ba02.yaml b/Bindings/display/panel/feixin,k101-im2ba02.yaml
new file mode 100644
index 0000000..81adb82
--- /dev/null
+++ b/Bindings/display/panel/feixin,k101-im2ba02.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feixin,k101-im2ba02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feixin K101 IM2BA02 10.1" MIPI-DSI LCD panel
+
+maintainers:
+ - Icenowy Zheng <icenowy@aosc.io>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: feixin,k101-im2ba02
+ reg: true
+ backlight: true
+ reset-gpios: true
+ avdd-supply:
+ description: regulator that supplies the AVDD voltage
+ dvdd-supply:
+ description: regulator that supplies the DVDD voltage
+ cvdd-supply:
+ description: regulator that supplies the CVDD voltage
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - dvdd-supply
+ - cvdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "feixin,k101-im2ba02";
+ reg = <0>;
+ avdd-supply = <®_dc1sw>;
+ dvdd-supply = <®_dc1sw>;
+ cvdd-supply = <®_ldo_io1>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Bindings/display/panel/feiyang,fy07024di26a30d.yaml
new file mode 100644
index 0000000..92df69e
--- /dev/null
+++ b/Bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/feiyang,fy07024di26a30d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel
+
+maintainers:
+ - Jagan Teki <jagan@amarulasolutions.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: feiyang,fy07024di26a30d
+
+ reg:
+ description: DSI virtual channel used by that screen
+ maxItems: 1
+
+ avdd-supply:
+ description: analog regulator dc1 switch
+
+ dvdd-supply:
+ description: 3v3 digital regulator
+
+ port: true
+ reset-gpios: true
+
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - dvdd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "feiyang,fy07024di26a30d";
+ reg = <0>;
+ avdd-supply = <®_dc1sw>;
+ dvdd-supply = <®_dldo2>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+ backlight = <&backlight>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/focaltech,gpt3.yaml b/Bindings/display/panel/focaltech,gpt3.yaml
new file mode 100644
index 0000000..d54e96b
--- /dev/null
+++ b/Bindings/display/panel/focaltech,gpt3.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/focaltech,gpt3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Focaltech GPT3 3.0" (640x480 pixels) IPS LCD panel
+
+maintainers:
+ - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: focaltech,gpt3
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "focaltech,gpt3";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/himax,hx8394.yaml b/Bindings/display/panel/himax,hx8394.yaml
new file mode 100644
index 0000000..ffb3528
--- /dev/null
+++ b/Bindings/display/panel/himax,hx8394.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX8394 MIPI-DSI LCD panel controller
+
+maintainers:
+ - Ondrej Jirman <megi@xff.cz>
+ - Javier Martinez Canillas <javierm@redhat.com>
+
+description:
+ Device tree bindings for panels based on the Himax HX8394 controller,
+ such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with
+ a MIPI-DSI video interface.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - hannstar,hsd060bhw4
+ - const: himax,hx8394
+
+ reg: true
+
+ reset-gpios: true
+
+ backlight: true
+
+ port: true
+
+ vcc-supply:
+ description: Panel power supply
+
+ iovcc-supply:
+ description: I/O voltage supply
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - backlight
+ - port
+ - vcc-supply
+ - iovcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "hannstar,hsd060bhw4", "himax,hx8394";
+ reg = <0>;
+ vcc-supply = <®_2v8_p>;
+ iovcc-supply = <®_1v8_p>;
+ reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/ilitek,ili9163.yaml b/Bindings/display/panel/ilitek,ili9163.yaml
new file mode 100644
index 0000000..3cabbba
--- /dev/null
+++ b/Bindings/display/panel/ilitek,ili9163.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9163 display panels
+
+maintainers:
+ - Daniel Mack <daniel@zonque.org>
+
+description:
+ This binding is for display panels using an Ilitek ILI9163 controller in SPI
+ mode.
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - newhaven,1.8-128160EF
+ - const: ilitek,ili9163
+
+ spi-max-frequency:
+ maximum: 32000000
+
+ dc-gpios:
+ maxItems: 1
+ description: Display data/command selection (D/CX)
+
+ backlight: true
+ reg: true
+ reset-gpios: true
+ rotation: true
+
+required:
+ - compatible
+ - reg
+ - dc-gpios
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0 {
+ compatible = "newhaven,1.8-128160EF", "ilitek,ili9163";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ rotation = <180>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/ilitek,ili9322.yaml b/Bindings/display/panel/ilitek,ili9322.yaml
new file mode 100644
index 0000000..7d221ef
--- /dev/null
+++ b/Bindings/display/panel/ilitek,ili9322.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9322.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9322 TFT panel driver with SPI control bus
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ This is a driver for 320x240 TFT panels, accepting a variety of input
+ streams that get adapted and scaled to the panel. The panel output has
+ 960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
+ VCOMH outputs.
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - dlink,dir-685-panel
+ - const: ilitek,ili9322
+
+ reset-gpios: true
+ port: true
+
+ vcc-supply:
+ description: Core voltage supply
+
+ iovcc-supply:
+ description: Voltage supply for the interface input/output signals
+
+ vci-supply:
+ description: Voltage supply for analog parts
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: display@0 {
+ compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+ reg = <0>;
+ vcc-supply = <&vdisp>;
+ iovcc-supply = <&vdisp>;
+ vci-supply = <&vdisp>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/ilitek,ili9341.yaml b/Bindings/display/panel/ilitek,ili9341.yaml
new file mode 100644
index 0000000..94f169e
--- /dev/null
+++ b/Bindings/display/panel/ilitek,ili9341.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9341.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek-9341 Display Panel
+
+maintainers:
+ - Dillon Min <dillon.minfei@gmail.com>
+
+description: |
+ Ilitek ILI9341 TFT panel driver with SPI control bus
+ This is a driver for 320x240 TFT panels, accepting a rgb input
+ streams with 16 bits or 18 bits.
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - adafruit,yx240qv29
+ # ili9341 240*320 Color on stm32f429-disco board
+ - st,sf-tc240t-9370-t
+ - canaan,kd233-tft
+ - const: ilitek,ili9341
+
+ reg: true
+
+ dc-gpios:
+ maxItems: 1
+ description: Display data/command selection (D/CX) of this DBI panel
+
+ spi-3wire: true
+
+ spi-max-frequency:
+ const: 10000000
+
+ port: true
+
+ vci-supply:
+ description: Analog voltage supply (2.5 .. 3.3V)
+
+ vddi-supply:
+ description: Voltage supply for interface logic (1.65 .. 3.3 V)
+
+ vddi-led-supply:
+ description: Voltage supply for the LED driver (1.65 .. 3.3 V)
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - dc-gpios
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,sf-tc240t-9370-t
+then:
+ required:
+ - port
+
+examples:
+ - |+
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel: display@0 {
+ compatible = "st,sf-tc240t-9370-t",
+ "ilitek,ili9341";
+ reg = <0>;
+ spi-3wire;
+ spi-max-frequency = <10000000>;
+ dc-gpios = <&gpiod 13 0>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ display@1{
+ compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ rotation = <270>;
+ backlight = <&backlight>;
+ };
+ };
+...
diff --git a/Bindings/display/panel/ilitek,ili9881c.yaml b/Bindings/display/panel/ilitek,ili9881c.yaml
new file mode 100644
index 0000000..e7ab622
--- /dev/null
+++ b/Bindings/display/panel/ilitek,ili9881c.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9881c based MIPI-DSI panels
+
+maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - bananapi,lhr050h41
+ - feixin,k101-im2byl02
+ - tdo,tl050hdv35
+ - wanchanglong,w552946aba
+ - const: ilitek,ili9881c
+
+ backlight: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+ rotation: true
+
+required:
+ - compatible
+ - power-supply
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+ reg = <0>;
+ power-supply = <®_display>;
+ reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+ backlight = <&pwm_bl>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/innolux,ee101ia-01d.yaml b/Bindings/display/panel/innolux,ee101ia-01d.yaml
new file mode 100644
index 0000000..ab6b7be
--- /dev/null
+++ b/Bindings/display/panel/innolux,ee101ia-01d.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,ee101ia-01d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux Corporation 10.1" EE101IA-01D WXGA (1280x800) LVDS panel
+
+maintainers:
+ - Heiko Stuebner <heiko.stuebner@bq.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: innolux,ee101ia-01d
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: innolux,ee101ia-01d
+ - const: panel-lvds
+
+ backlight: true
+ data-mapping: true
+ enable-gpios: true
+ power-supply: true
+ width-mm: true
+ height-mm: true
+ panel-timing: true
+ port: true
+
+required:
+ - compatible
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+ - port
+
+additionalProperties: false
+...
diff --git a/Bindings/display/panel/innolux,ej030na.yaml b/Bindings/display/panel/innolux,ej030na.yaml
new file mode 100644
index 0000000..72788e3
--- /dev/null
+++ b/Bindings/display/panel/innolux,ej030na.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,ej030na.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: innolux,ej030na
+
+ backlight: true
+ port: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+
+required:
+ - compatible
+ - reg
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "innolux,ej030na";
+ reg = <0>;
+
+ spi-max-frequency = <10000000>;
+
+ reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+ power-supply = <&lcd_power>;
+
+ backlight = <&backlight>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/innolux,p097pfg.yaml b/Bindings/display/panel/innolux,p097pfg.yaml
new file mode 100644
index 0000000..5a5f071
--- /dev/null
+++ b/Bindings/display/panel/innolux,p097pfg.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/innolux,p097pfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+maintainers:
+ - Lin Huang <hl@rock-chips.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: innolux,p097pfg
+
+ backlight: true
+ enable-gpios: true
+ reg: true
+
+ avdd-supply:
+ description: The regulator that provides positive voltage
+
+ avee-supply:
+ description: The regulator that provides negative voltage
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - avee-supply
+ - enable-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "innolux,p097pfg";
+ reg = <0>;
+ avdd-supply = <&avdd>;
+ avee-supply = <&avee>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/jadard,jd9365da-h3.yaml b/Bindings/display/panel/jadard,jd9365da-h3.yaml
new file mode 100644
index 0000000..41eb7fb
--- /dev/null
+++ b/Bindings/display/panel/jadard,jd9365da-h3.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jadard,jd9365da-h3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Jadard JD9365DA-HE WXGA DSI panel
+
+maintainers:
+ - Jagan Teki <jagan@edgeble.ai>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - chongzhou,cz101b4001
+ - radxa,display-10hd-ad001
+ - radxa,display-8hd-ad002
+ - const: jadard,jd9365da-h3
+
+ reg: true
+
+ vdd-supply:
+ description: supply regulator for VDD, usually 3.3V
+
+ vccio-supply:
+ description: supply regulator for VCCIO, usually 1.8V
+
+ reset-gpios: true
+
+ backlight: true
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - vdd-supply
+ - vccio-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "chongzhou,cz101b4001", "jadard,jd9365da-h3";
+ reg = <0>;
+ vdd-supply = <&lcd_3v3>;
+ vccio-supply = <&vcca_1v8>;
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/jdi,lpm102a188a.yaml b/Bindings/display/panel/jdi,lpm102a188a.yaml
new file mode 100644
index 0000000..2f4d27a
--- /dev/null
+++ b/Bindings/display/panel/jdi,lpm102a188a.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lpm102a188a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI LPM102A188A 2560x1800 10.2" DSI Panel
+
+maintainers:
+ - Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
+
+description: |
+ This panel requires a dual-channel DSI host to operate. It supports two modes:
+ - left-right: each channel drives the left or right half of the screen
+ - even-odd: each channel drives the even or odd lines of the screen
+
+ Each of the DSI channels controls a separate DSI peripheral. The peripheral
+ driven by the first link (DSI-LINK1) is considered the primary peripheral
+ and controls the device. The 'link2' property contains a phandle to the
+ peripheral driven by the second link (DSI-LINK2).
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: jdi,lpm102a188a
+
+ reg: true
+ enable-gpios: true
+ reset-gpios: true
+ power-supply: true
+ backlight: true
+
+ ddi-supply:
+ description: The regulator that provides IOVCC (1.8V).
+
+ link2:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ phandle to the DSI peripheral on the secondary link. Note that the
+ presence of this property marks the containing node as DSI-LINK1.
+
+required:
+ - compatible
+ - reg
+
+if:
+ required:
+ - link2
+then:
+ required:
+ - power-supply
+ - ddi-supply
+ - enable-gpios
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/gpio/tegra-gpio.h>
+
+ dsia: dsi@54300000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x54300000 0x0 0x00040000>;
+
+ link2: panel@0 {
+ compatible = "jdi,lpm102a188a";
+ reg = <0>;
+ };
+ };
+
+ dsib: dsi@54400000{
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x54400000 0x0 0x00040000>;
+ nvidia,ganged-mode = <&dsia>;
+
+ link1: panel@0 {
+ compatible = "jdi,lpm102a188a";
+ reg = <0>;
+ power-supply = <&pplcd_vdd>;
+ ddi-supply = <&pp1800_lcdio>;
+ enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ link2 = <&link2>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/jdi,lt070me05000.yaml b/Bindings/display/panel/jdi,lt070me05000.yaml
new file mode 100644
index 0000000..63c82a4
--- /dev/null
+++ b/Bindings/display/panel/jdi,lt070me05000.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+maintainers:
+ - Vinay Simha BN <simhavcs@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: jdi,lt070me05000
+
+ enable-gpios: true
+ reg: true
+ reset-gpios: true
+
+ vddp-supply:
+ description: |
+ The regulator that provides the supply voltage Power IC supply (3-5V)
+
+ iovcc-supply:
+ description: |
+ The regulator that provides the supply voltage IOVCC,
+ power supply for LCM (1.8V)
+
+ dcdc-en-gpios:
+ maxItems: 1
+ description: |
+ phandle of the gpio for power ic line
+ Power IC supply enable, High active
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - vddp-supply
+ - iovcc-supply
+ - enable-gpios
+ - reset-gpios
+ - dcdc-en-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "jdi,lt070me05000";
+ reg = <0>;
+
+ vddp-supply = <&pm8921_l17>;
+ iovcc-supply = <&pm8921_lvs7>;
+
+ enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+ dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
new file mode 100644
index 0000000..b4be9bd
--- /dev/null
+++ b/Bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/kingdisplay,kd035g6-54nt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: kingdisplay,kd035g6-54nt
+
+ backlight: true
+ port: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+
+ spi-3wire: true
+
+required:
+ - compatible
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "kingdisplay,kd035g6-54nt";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+ spi-3wire;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&ldo6>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/leadtek,ltk035c5444t.yaml b/Bindings/display/panel/leadtek,ltk035c5444t.yaml
new file mode 100644
index 0000000..ebdca5f
--- /dev/null
+++ b/Bindings/display/panel/leadtek,ltk035c5444t.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+ - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: leadtek,ltk035c5444t
+
+ backlight: true
+ port: true
+ power-supply: true
+ reg: true
+ reset-gpios: true
+
+ spi-3wire: true
+
+required:
+ - compatible
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "leadtek,ltk035c5444t";
+ reg = <0>;
+
+ spi-3wire;
+ spi-max-frequency = <3125000>;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/leadtek,ltk050h3146w.yaml b/Bindings/display/panel/leadtek,ltk050h3146w.yaml
new file mode 100644
index 0000000..a40ab88
--- /dev/null
+++ b/Bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel
+
+maintainers:
+ - Quentin Schulz <quentin.schulz@theobroma-systems.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - leadtek,ltk050h3146w
+ - leadtek,ltk050h3146w-a2
+ - leadtek,ltk050h3148w
+ reg: true
+ backlight: true
+ reset-gpios: true
+ iovcc-supply:
+ description: regulator that supplies the iovcc voltage
+ vci-supply:
+ description: regulator that supplies the vci voltage
+
+required:
+ - compatible
+ - reg
+ - backlight
+ - iovcc-supply
+ - vci-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "leadtek,ltk050h3146w";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_1v8>;
+ vci-supply = <&vcc3v3_lcd>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/leadtek,ltk500hd1829.yaml b/Bindings/display/panel/leadtek,ltk500hd1829.yaml
new file mode 100644
index 0000000..c5944b4
--- /dev/null
+++ b/Bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk500hd1829.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek LTK500HD1829 5.0in 720x1280 DSI panel
+
+maintainers:
+ - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: leadtek,ltk500hd1829
+ reg: true
+ backlight: true
+ reset-gpios: true
+ iovcc-supply:
+ description: regulator that supplies the iovcc voltage
+ vcc-supply:
+ description: regulator that supplies the vcc voltage
+
+required:
+ - compatible
+ - reg
+ - backlight
+ - iovcc-supply
+ - vcc-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "leadtek,ltk500hd1829";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_1v8>;
+ vcc-supply = <&vcc_2v8>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/lg,lg4573.yaml b/Bindings/display/panel/lg,lg4573.yaml
new file mode 100644
index 0000000..ee357e1
--- /dev/null
+++ b/Bindings/display/panel/lg,lg4573.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,lg4573.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG LG4573 TFT Liquid Crystal Display with SPI control bus
+
+description: |
+ The panel must obey the rules for a SPI slave device as specified in
+ spi/spi-controller.yaml
+
+maintainers:
+ - Heiko Schocher <hs@denx.de>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: lg,lg4573
+
+ reg: true
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lcd_panel: display@0 {
+ compatible = "lg,lg4573";
+ spi-max-frequency = <10000000>;
+ reg = <0>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/lgphilips,lb035q02.yaml b/Bindings/display/panel/lgphilips,lb035q02.yaml
new file mode 100644
index 0000000..628c4b8
--- /dev/null
+++ b/Bindings/display/panel/lgphilips,lb035q02.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lgphilips,lb035q02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG.Philips LB035Q02 Panel
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: lgphilips,lb035q02
+
+ label: true
+ enable-gpios: true
+ port: true
+
+ spi-cpha: true
+ spi-cpol: true
+
+required:
+ - compatible
+ - enable-gpios
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: panel@0 {
+ compatible = "lgphilips,lb035q02";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+
+ enable-gpios = <&gpio7 7 0>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/logicpd,type28.yaml b/Bindings/display/panel/logicpd,type28.yaml
new file mode 100644
index 0000000..2834287
--- /dev/null
+++ b/Bindings/display/panel/logicpd,type28.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/logicpd,type28.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Logic PD Type 28 4.3" WQVGA TFT LCD panel
+
+maintainers:
+ - Adam Ford <aford173@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: logicpd,type28
+
+ power-supply: true
+ enable-gpios: true
+ backlight: true
+ port: true
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ lcd0: display {
+ compatible = "logicpd,type28";
+ enable-gpios = <&gpio5 27 0>;
+ backlight = <&backlight>;
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/mantix,mlaf057we51-x.yaml b/Bindings/display/panel/mantix,mlaf057we51-x.yaml
new file mode 100644
index 0000000..74ff772
--- /dev/null
+++ b/Bindings/display/panel/mantix,mlaf057we51-x.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mantix MLAF057WE51-X 5.7" 720x1440 TFT LCD panel
+
+maintainers:
+ - Guido Günther <agx@sigxcpu.org>
+
+description:
+ Mantix MLAF057WE51 X is a 720x1440 TFT LCD panel connected using
+ a MIPI-DSI video interface.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - mantix,mlaf057we51-x
+ - ys,ys57pss36bh5gq
+
+ port: true
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ avdd-supply:
+ description: Positive analog power supply
+
+ avee-supply:
+ description: Negative analog power supply
+
+ vddi-supply:
+ description: 1.8V I/O voltage supply
+
+ reset-gpios: true
+
+ mantix,tp-rstn-gpios:
+ maxItems: 1
+ description: second reset line that triggers DSI config load
+
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+ - avee-supply
+ - vddi-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "mantix,mlaf057we51-x";
+ reg = <0>;
+ avdd-supply = <®_avdd>;
+ avee-supply = <®_avee>;
+ vddi-supply = <®_1v8_p>;
+ reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ mantix,tp-rstn-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/mitsubishi,aa104xd12.yaml b/Bindings/display/panel/mitsubishi,aa104xd12.yaml
new file mode 100644
index 0000000..3623ffa
--- /dev/null
+++ b/Bindings/display/panel/mitsubishi,aa104xd12.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mitsubishi,aa104xd12.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mitsubishi AA104XD12 10.4" XGA LVDS Display Panel
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: mitsubishi,aa104xd12
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: mitsubishi,aa104xd12
+ - const: panel-lvds
+
+ vcc-supply:
+ description: Reference to the regulator powering the panel VCC pins.
+
+ data-mapping:
+ const: jeida-24
+
+ width-mm:
+ const: 210
+
+ height-mm:
+ const: 158
+
+ panel-timing: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - vcc-supply
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+ - port
+
+examples:
+ - |+
+
+ panel {
+ compatible = "mitsubishi,aa104xd12", "panel-lvds";
+ vcc-supply = <&vcc_3v3>;
+
+ width-mm = <210>;
+ height-mm = <158>;
+
+ data-mapping = "jeida-24";
+
+ panel-timing {
+ /* 1024x768 @65Hz */
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hsync-len = <136>;
+ hfront-porch = <20>;
+ hback-porch = <160>;
+ vfront-porch = <3>;
+ vback-porch = <29>;
+ vsync-len = <6>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_encoder>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/mitsubishi,aa121td01.yaml b/Bindings/display/panel/mitsubishi,aa121td01.yaml
new file mode 100644
index 0000000..37f01d8
--- /dev/null
+++ b/Bindings/display/panel/mitsubishi,aa121td01.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/mitsubishi,aa121td01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mitsubishi AA121TD01 12.1" WXGA LVDS Display Panel
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: mitsubishi,aa121td01
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: mitsubishi,aa121td01
+ - const: panel-lvds
+
+ vcc-supply:
+ description: Reference to the regulator powering the panel VCC pins.
+
+ data-mapping:
+ const: jeida-24
+
+ width-mm:
+ const: 261
+
+ height-mm:
+ const: 163
+
+ panel-timing: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - vcc-supply
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+ - port
+
+examples:
+ - |+
+ panel {
+ compatible = "mitsubishi,aa121td01", "panel-lvds";
+ vcc-supply = <&vcc_3v3>;
+
+ width-mm = <261>;
+ height-mm = <163>;
+
+ data-mapping = "jeida-24";
+
+ panel-timing {
+ /* 1280x800 @60Hz */
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hsync-len = <70>;
+ hfront-porch = <20>;
+ hback-porch = <70>;
+ vsync-len = <5>;
+ vfront-porch = <3>;
+ vback-porch = <15>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_encoder>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/nec,nl8048hl11.yaml b/Bindings/display/panel/nec,nl8048hl11.yaml
new file mode 100644
index 0000000..accf933
--- /dev/null
+++ b/Bindings/display/panel/nec,nl8048hl11.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/nec,nl8048hl11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NEC NL8048HL11 4.1" WVGA TFT LCD panel
+
+description:
+ The NEC NL8048HL11 is a 4.1" WVGA TFT LCD panel with a 24-bit RGB parallel
+ data interface and an SPI control interface.
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: nec,nl8048hl11
+
+ label: true
+ port: true
+ reg: true
+ reset-gpios: true
+
+ spi-max-frequency:
+ maximum: 10000000
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lcd_panel: panel@0 {
+ compatible = "nec,nl8048hl11";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/newvision,nv3051d.yaml b/Bindings/display/panel/newvision,nv3051d.yaml
new file mode 100644
index 0000000..cce775a
--- /dev/null
+++ b/Bindings/display/panel/newvision,nv3051d.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/newvision,nv3051d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NewVision NV3051D based LCD panel
+
+description: |
+ The NewVision NV3051D is a driver chip used to drive DSI panels.
+
+maintainers:
+ - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - anbernic,rg351v-panel
+ - anbernic,rg353p-panel
+ - anbernic,rg353v-panel
+ - const: newvision,nv3051d
+
+ reg: true
+ backlight: true
+ port: true
+ reset-gpios:
+ description: Active low reset GPIO
+ vdd-supply: true
+
+required:
+ - compatible
+ - reg
+ - backlight
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "anbernic,rg353p-panel", "newvision,nv3051d";
+ reg = <0>;
+ backlight = <&backlight>;
+ reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc3v3_lcd>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/novatek,nt35510.yaml b/Bindings/display/panel/novatek,nt35510.yaml
new file mode 100644
index 0000000..bc92928
--- /dev/null
+++ b/Bindings/display/panel/novatek,nt35510.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35510.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35510-based display panels
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: hydis,hva40wv1
+ - const: novatek,nt35510
+ description: This indicates the panel manufacturer of the panel
+ that is in turn using the NT35510 panel driver. The compatible
+ string determines how the NT35510 panel driver shall be configured
+ to work with the indicated panel. The novatek,nt35510 compatible shall
+ always be provided as a fallback.
+ reg: true
+ reset-gpios: true
+ vdd-supply:
+ description: regulator that supplies the vdd voltage
+ vddi-supply:
+ description: regulator that supplies the vddi voltage
+ backlight: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "hydis,hva40wv1", "novatek,nt35510";
+ reg = <0>;
+ vdd-supply = <&ab8500_ldo_aux4_reg>;
+ vddi-supply = <&ab8500_ldo_aux6_reg>;
+ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ backlight = <&gpio_bl>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/novatek,nt35950.yaml b/Bindings/display/panel/novatek,nt35950.yaml
new file mode 100644
index 0000000..377a05d
--- /dev/null
+++ b/Bindings/display/panel/novatek,nt35950.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35950-based display panels
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+ The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels,
+ with Static RAM for content retention in command mode and also supports
+ video mode with VESA Frame Buffer Compression or Display Stream Compression
+ on single, or dual dsi port(s).
+ This DDIC is also capable of upscaling an input image to the panel's native
+ resolution, for example it can upscale a 1920x1080 input to 3840x2160 with
+ either bilinear interpolation or pixel duplication.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - sharp,ls055d1sx04
+ - const: novatek,nt35950
+ description: This indicates the panel manufacturer of the panel
+ that is in turn using the NT35950 panel driver. The compatible
+ string determines how the NT35950 panel driver shall be configured
+ to work with the indicated panel. The novatek,nt35950 compatible shall
+ always be provided as a fallback.
+
+ reset-gpios:
+ maxItems: 1
+ description: phandle of gpio for reset line - This should be 8mA, gpio
+ can be configured using mux, pinctrl, pinctrl-names (active high)
+
+ avdd-supply:
+ description: positive boost supply regulator
+ avee-supply:
+ description: negative boost supply regulator
+ dvdd-supply:
+ description: regulator that supplies the digital voltage
+ vddio-supply:
+ description: regulator that supplies the I/O voltage
+
+ backlight: true
+ ports: true
+ reg: true
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - avdd-supply
+ - avee-supply
+ - dvdd-supply
+ - vddio-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sharp,ls055d1sx04", "novatek,nt35950";
+ reg = <0>;
+
+ backlight = <&pmi8998_wled>;
+ reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+ avdd-supply = <&lab>;
+ avee-supply = <&ibb>;
+ dvdd-supply = <&disp_dvdd_vreg>;
+ vddio-supply = <&vreg_l14a_1p85>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ panel_in0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ panel_in1: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/novatek,nt36523.yaml b/Bindings/display/panel/novatek,nt36523.yaml
new file mode 100644
index 0000000..5f7e4c4
--- /dev/null
+++ b/Bindings/display/panel/novatek,nt36523.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36523.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36523 based DSI display Panels
+
+maintainers:
+ - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+ The Novatek NT36523 is a generic DSI Panel IC used to drive dsi
+ panels. Support video mode panels from China Star Optoelectronics
+ Technology (CSOT) and BOE Technology.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - xiaomi,elish-boe-nt36523
+ - xiaomi,elish-csot-nt36523
+ - const: novatek,nt36523
+ - items:
+ - enum:
+ - lenovo,j606f-boe-nt36523w
+ - const: novatek,nt36523w
+
+ reset-gpios:
+ maxItems: 1
+ description: phandle of gpio for reset line - This should be 8mA
+
+ vddio-supply:
+ description: regulator that supplies the I/O voltage
+
+ reg: true
+ ports: true
+ rotation: true
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - reset-gpios
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523";
+ reg = <0>;
+
+ vddio-supply = <&vreg_l14a_1p88>;
+ reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ panel_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1{
+ reg = <1>;
+ panel_in_1: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/novatek,nt36672a.yaml b/Bindings/display/panel/novatek,nt36672a.yaml
new file mode 100644
index 0000000..ae821f4
--- /dev/null
+++ b/Bindings/display/panel/novatek,nt36672a.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36672a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36672A based DSI display Panels
+
+maintainers:
+ - Sumit Semwal <sumit.semwal@linaro.org>
+
+description: |
+ The nt36672a IC from Novatek is a generic DSI Panel IC used to drive dsi
+ panels.
+ Right now, support is added only for a Tianma FHD+ LCD display panel with a
+ resolution of 1080x2246. It is a video mode DSI panel.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - tianma,fhd-video
+ - const: novatek,nt36672a
+ description: This indicates the panel manufacturer of the panel that is
+ in turn using the NT36672A panel driver. This compatible string
+ determines how the NT36672A panel driver is configured for the indicated
+ panel. The novatek,nt36672a compatible shall always be provided as a fallback.
+
+ reset-gpios:
+ maxItems: 1
+ description: phandle of gpio for reset line - This should be 8mA, gpio
+ can be configured using mux, pinctrl, pinctrl-names (active high)
+
+ vddio-supply:
+ description: phandle of the regulator that provides the supply voltage
+ Power IC supply
+
+ vddpos-supply:
+ description: phandle of the positive boost supply regulator
+
+ vddneg-supply:
+ description: phandle of the negative boost supply regulator
+
+ reg: true
+ port: true
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - vddpos-supply
+ - vddneg-supply
+ - reset-gpios
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |+
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "tianma,fhd-video", "novatek,nt36672a";
+ reg = <0>;
+ vddio-supply = <&vreg_l14a_1p88>;
+ vddpos-supply = <&lab>;
+ vddneg-supply = <&ibb>;
+
+ backlight = <&pmi8998_wled>;
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+ port {
+ tianma_nt36672a_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/olimex,lcd-olinuxino.yaml b/Bindings/display/panel/olimex,lcd-olinuxino.yaml
new file mode 100644
index 0000000..7246379
--- /dev/null
+++ b/Bindings/display/panel/olimex,lcd-olinuxino.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Olimex Ltd. LCD-OLinuXino bridge panel.
+
+maintainers:
+ - Stefan Mavrodiev <stefan@olimex.com>
+
+description: |
+ This device can be used as bridge between a host controller and LCD panels.
+ Currently supported LCDs are:
+ - LCD-OLinuXino-4.3TS
+ - LCD-OLinuXino-5
+ - LCD-OLinuXino-7
+ - LCD-OLinuXino-10
+
+ The panel itself contains:
+ - AT24C16C EEPROM holding panel identification and timing requirements
+ - AR1021 resistive touch screen controller (optional)
+ - FT5x6 capacitive touch screen controller (optional)
+ - GT911/GT928 capacitive touch screen controller (optional)
+
+ The above chips share same I2C bus. The EEPROM is factory preprogrammed with
+ device information (id, serial, etc.) and timing requirements.
+
+ Touchscreen bingings can be found in these files:
+ - input/touchscreen/goodix.yaml
+ - input/touchscreen/edt-ft5x06.txt
+ - input/touchscreen/ar1021.txt
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: olimex,lcd-olinuxino
+
+ backlight: true
+ enable-gpios: true
+ power-supply: true
+ reg: true
+
+required:
+ - compatible
+ - reg
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@50 {
+ compatible = "olimex,lcd-olinuxino";
+ reg = <0x50>;
+ power-supply = <®_vcc5v0>;
+ enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/orisetech,otm8009a.yaml b/Bindings/display/panel/orisetech,otm8009a.yaml
new file mode 100644
index 0000000..1e4f140
--- /dev/null
+++ b/Bindings/display/panel/orisetech,otm8009a.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+maintainers:
+ - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+ The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+ a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+
+ compatible:
+ const: orisetech,otm8009a
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ enable-gpios: true
+ port: true
+ power-supply: true
+
+ reset-gpios:
+ maxItems: 1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>;
+ reset-gpios = <&gpiof 15 0>;
+ power-supply = <&v1v8>;
+ };
+ };
+...
diff --git a/Bindings/display/panel/panel-common.yaml b/Bindings/display/panel/panel-common.yaml
new file mode 100644
index 0000000..0a57a31
--- /dev/null
+++ b/Bindings/display/panel/panel-common.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Display Panels
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+ This document defines device tree properties common to several classes of
+ display panels. It doesn't constitute a device tree binding specification by
+ itself but is meant to be referenced by device tree bindings.
+
+ When referenced from panel device tree bindings the properties defined in this
+ document are defined as follows. The panel device tree bindings are
+ responsible for defining whether each property is required or optional.
+
+properties:
+ # Descriptive Properties
+ width-mm:
+ description:
+ Specifies the width of the physical area where images are displayed. This
+ property is expressed in millimeters and rounded to the closest unit.
+
+ height-mm:
+ description:
+ Specifies the height of the physical area where images are displayed. This
+ property is expressed in millimeters and rounded to the closest unit.
+
+ label:
+ description: |
+ The label property specifies a symbolic name for the panel as a
+ string suitable for use by humans. It typically contains a name inscribed
+ on the system (e.g. as an affixed label) or specified in the system's
+ documentation (e.g. in the user's manual).
+
+ If no such name exists, and unless the property is mandatory according to
+ device tree bindings, it shall rather be omitted than constructed of
+ non-descriptive information. For instance an LCD panel in a system that
+ contains a single panel shall not be labelled "LCD" if that name is not
+ inscribed on the system or used in a descriptive fashion in system
+ documentation.
+
+ rotation:
+ description:
+ Display rotation in degrees counter clockwise (0,90,180,270)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 90, 180, 270]
+
+ # Display Timings
+ panel-timing:
+ description:
+ Most display panels are restricted to a single resolution and
+ require specific display timings. The panel-timing subnode expresses those
+ timings.
+ $ref: panel-timing.yaml#
+
+ display-timings:
+ description:
+ Some display panels support several resolutions with different timings.
+ The display-timings bindings supports specifying several timings and
+ optionally specifying which is the native mode.
+ $ref: display-timings.yaml#
+
+ # Connectivity
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+
+ ddc-i2c-bus:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Some panels expose EDID information through an I2C-compatible
+ bus such as DDC2 or E-DDC. For such panels the ddc-i2c-bus contains a
+ phandle to the system I2C controller connected to that bus.
+
+ no-hpd:
+ type: boolean
+ description:
+ This panel is supposed to communicate that it's ready via HPD
+ (hot plug detect) signal, but the signal isn't hooked up so we should
+ hardcode the max delay from the panel spec when powering up the panel.
+
+ hpd-gpios:
+ maxItems: 1
+ description:
+ If Hot Plug Detect (HPD) is connected to a GPIO in the system rather
+ than a dedicated HPD pin the pin can be specified here.
+
+ # Control I/Os
+
+ # Many display panels can be controlled through pins driven by GPIOs. The nature
+ # and timing of those control signals are device-specific and left for panel
+ # device tree bindings to specify. The following GPIO specifiers can however be
+ # used for panels that implement compatible control signals.
+
+ enable-gpios:
+ maxItems: 1
+ description: |
+ Specifier for a GPIO connected to the panel enable control signal. The
+ enable signal is active high and enables operation of the panel. This
+ property can also be used for panels implementing an active low power down
+ signal, which is a negated version of the enable signal. Active low enable
+ signals (or active high power down signals) can be supported by inverting
+ the GPIO specifier polarity flag.
+
+ Note that the enable signal control panel operation only and must not be
+ confused with a backlight enable signal.
+
+ reset-gpios:
+ maxItems: 1
+ description:
+ Specifier for a GPIO connected to the panel reset control signal.
+ The reset signal is active low and resets the panel internal logic
+ while active. Active high reset signals can be supported by inverting the
+ GPIO specifier polarity flag.
+
+ te-gpios:
+ maxItems: 1
+ description:
+ GPIO spec for the tearing effect synchronization signal.
+ The tearing effect signal is active high. Active low signals can be
+ supported by inverting the GPIO specifier polarity flag.
+
+ # Power
+ power-supply:
+ description:
+ Display panels require power to be supplied. While several panels need
+ more than one power supply with panel-specific constraints governing the
+ order and timings of the power supplies, in many cases a single power
+ supply is sufficient, either because the panel has a single power rail, or
+ because all its power rails can be driven by the same supply. In that case
+ the power-supply property specifies the supply powering the panel as a
+ phandle to a regulator.
+
+ # Backlight
+
+ # Most display panels include a backlight. Some of them also include a backlight
+ # controller exposed through a control bus such as I2C or DSI. Others expose
+ # backlight control through GPIO, PWM or other signals connected to an external
+ # backlight controller.
+
+ backlight:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ For panels whose backlight is controlled by an external backlight
+ controller, this property contains a phandle that references the
+ controller.
+
+dependencies:
+ width-mm: [ height-mm ]
+ height-mm: [ width-mm ]
+
+additionalProperties: true
+
+...
diff --git a/Bindings/display/panel/panel-dpi.yaml b/Bindings/display/panel/panel-dpi.yaml
new file mode 100644
index 0000000..dae0676
--- /dev/null
+++ b/Bindings/display/panel/panel-dpi.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic MIPI DPI Panel
+
+maintainers:
+ - Sam Ravnborg <sam@ravnborg.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ description:
+ Shall contain a panel specific compatible and "panel-dpi"
+ in that order.
+ items:
+ - {}
+ - const: panel-dpi
+
+ backlight: true
+ enable-gpios: true
+ height-mm: true
+ label: true
+ panel-timing: true
+ port: true
+ power-supply: true
+ reset-gpios: true
+ width-mm: true
+
+required:
+ - panel-timing
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ panel {
+ compatible = "startek,startek-kd050c", "panel-dpi";
+ label = "osddisplay";
+ power-supply = <&vcc_supply>;
+ backlight = <&backlight>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ panel-timing {
+ clock-frequency = <9200000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vback-porch = <2>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/panel-dsi-cm.yaml b/Bindings/display/panel/panel-dsi-cm.yaml
new file mode 100644
index 0000000..f8dc992
--- /dev/null
+++ b/Bindings/display/panel/panel-dsi-cm.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DSI command mode panels
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ This binding file is a collection of the DSI panels that
+ are usually driven in command mode. If no backlight is
+ referenced via the optional backlight property, the DSI
+ panel is assumed to have native backlight support.
+ The panel may use an OF graph binding for the association
+ to the display, or it may be a direct child node of the
+ display.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+
+ compatible:
+ items:
+ - enum:
+ - motorola,droid4-panel # Panel from Motorola Droid4 phone
+ - nokia,himalaya # Panel from Nokia N950 phone
+ - tpo,taal # Panel from OMAP4 SDP board
+ - const: panel-dsi-cm # Generic DSI command mode panel compatible fallback
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ vddi-supply:
+ description:
+ Display panels require power to be supplied. While several panels need
+ more than one power supply with panel-specific constraints governing the
+ order and timings of the power supplies, in many cases a single power
+ supply is sufficient, either because the panel has a single power rail, or
+ because all its power rails can be driven by the same supply. In that case
+ the vddi-supply property specifies the supply powering the panel as a
+ phandle to a regulator.
+
+ vpnl-supply:
+ description:
+ When the display panel needs a second power supply, this property can be
+ used in addition to vddi-supply. Both supplies will be enabled at the
+ same time before the panel is being accessed.
+
+ width-mm: true
+ height-mm: true
+ label: true
+ rotation: true
+ panel-timing: true
+ port: true
+ reset-gpios: true
+ te-gpios: true
+ backlight: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi-controller {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "tpo,taal", "panel-dsi-cm";
+ reg = <0>;
+ reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/panel-edp.yaml b/Bindings/display/panel/panel-edp.yaml
new file mode 100644
index 0000000..bb0cf68
--- /dev/null
+++ b/Bindings/display/panel/panel-edp.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-edp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Probeable (via DP AUX / EDID) eDP Panels with simple poweron sequences
+
+maintainers:
+ - Douglas Anderson <dianders@chromium.org>
+
+description: |
+ This binding file can be used to indicate that an eDP panel is connected
+ to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without
+ actually specifying exactly what panel is connected. This is useful for
+ the case that more than one different panel could be connected to the
+ board, either for second-sourcing purposes or to support multiple SKUs
+ with different LCDs that hook up to a common board.
+
+ As per above, a requirement for using this binding is that the panel is
+ represented under the DP AUX bus. This means that we can use any
+ information provided by the DP AUX bus (including the EDID) to identify
+ the panel. We can use this to identify display size, resolution, and
+ timings among other things.
+
+ One piece of information about eDP panels that is typically _not_
+ provided anywhere on the DP AUX bus is the power sequencing timings.
+ This is the reason why, historically, we've always had to explicitly
+ list eDP panels. We solve that here with two tricks. The "worst case"
+ power on timings for any panels expected to be connected to a board are
+ specified in these bindings. Once we've powered on, it's expected that
+ the operating system will lookup the panel in a table (based on EDID
+ information) to figure out other power sequencing timings.
+
+ eDP panels in general can have somewhat arbitrary power sequencing
+ requirements. However, even though it's arbitrary in general, the
+ vast majority of panel datasheets have a power sequence diagram that
+ looks the exactly the same as every other panel. Each panel datasheet
+ cares about different timings in this diagram but the fact that the
+ diagram is so similar means we can come up with a single driver to
+ handle it.
+
+ These diagrams all look roughly like this, sometimes labeled with
+ slightly different numbers / lines but all pretty much the same
+ sequence. This is because much of this diagram comes straight from
+ the eDP Standard.
+
+ __________________________________________________
+ Vdd ___/: :\____ /
+ _/ : : \_____/
+ :<T1>:<T2>: :<--T10-->:<T11>:<T12>:
+ : +-----------------------+---------+---------+
+ eDP -----------+ Black video | Src vid | Blk vid +
+ Display : +-----------------------+---------+---------+
+ : _______________________:_________:_________:
+ HPD :<T3>| : : |
+ ___________| : : |_____________
+ : : : :
+ Sink +-----------------------:---------:---------+
+ AUX CH -----------+ AUX Ch operational : : +-------------
+ +-----------------------:---------:---------+
+ : : : :
+ :<T4>: :<T7>: : :
+ Src main +------+------+--------------+---------+
+ lnk data----------------+LnkTrn| Idle |Valid vid data| Idle/off+-------------
+ +------+------+--------------+---------+
+ : <T5> :<-T6->:<-T8->: :
+ :__:<T9>:
+ LED_EN | |
+ _____________________________________| |____________________________
+ : :
+ __________:__:_
+ PWM | : : |
+ __________________________| : : |__________________________
+ : : : :
+ _____________:__________:__:_:______
+ Bklight ____/: : : : : :\____
+ power _______/ :<---T13---->: : : :<T16>: \______________
+ (Vbl) :<T17>:<---------T14--------->: :<-T15->:<T18>:
+
+ The above looks fairly complex but, as per above, each panel only cares
+ about a subset of those timings.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: edp-panel
+
+ hpd-reliable-delay-ms:
+ description:
+ A fixed amount of time that must be waited after powering on the
+ panel's power-supply before the HPD signal is a reliable way to know
+ when the AUX channel is ready. This is useful for panels that glitch
+ the HPD at the start of power-on. This value is not needed if HPD is
+ always reliable for all panels that might be connected.
+
+ hpd-absent-delay-ms:
+ description:
+ The panel specifies that HPD will be asserted this many milliseconds
+ from power on (timing T3 in the diagram above). If we have no way to
+ measure HPD then a fixed delay of this many milliseconds can be used.
+ This can also be used as a timeout when waiting for HPD. Does not
+ include the hpd-reliable-delay, so if hpd-reliable-delay was 80 ms
+ and hpd-absent-delay was 200 ms then we'd do a fixed 80 ms delay and
+ then we know HPD would assert in the next 120 ms. This value is not
+ needed if HPD hooked up, either through a GPIO in the panel node or
+ hooked up directly to the eDP controller.
+
+ backlight: true
+ enable-gpios: true
+ port: true
+ power-supply: true
+ no-hpd: true
+ hpd-gpios: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@2d {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2d>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+ vpll-supply = <&src_pp1800_s4a>;
+ vccio-supply = <&src_pp1800_s4a>;
+ vcca-supply = <&src_pp1200_l2a>;
+ vcc-supply = <&src_pp1200_l2a>;
+
+ clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+ clock-names = "refclk";
+
+ no-hpd;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ sn65dsi86_out: endpoint {
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+ hpd-reliable-delay-ms = <15>;
+
+ port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/panel-lvds.yaml b/Bindings/display/panel/panel-lvds.yaml
new file mode 100644
index 0000000..9f10165
--- /dev/null
+++ b/Bindings/display/panel/panel-lvds.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic LVDS Display Panel
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: panel-lvds
+
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - advantech,idk-1110wr
+ - advantech,idk-2121wr
+ - innolux,ee101ia-01d
+ - mitsubishi,aa104xd12
+ - mitsubishi,aa121td01
+ - sgd,gktw70sdae4se
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - auo,b101ew05
+ # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel
+ - chunghwa,claa070wp03xg
+ # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
+ - hannstar,hsd101pww2
+ # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel
+ - hydis,hv070wx2-1e0
+ - tbs,a711-panel
+
+ - const: panel-lvds
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+ - port
+
+...
diff --git a/Bindings/display/panel/panel-mipi-dbi-spi.yaml b/Bindings/display/panel/panel-mipi-dbi-spi.yaml
new file mode 100644
index 0000000..e808215
--- /dev/null
+++ b/Bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DBI SPI Panel
+
+maintainers:
+ - Noralf Trønnes <noralf@tronnes.org>
+
+description: |
+ This binding is for display panels using a MIPI DBI compatible controller
+ in SPI mode.
+
+ The MIPI Alliance Standard for Display Bus Interface defines the electrical
+ and logical interfaces for display controllers historically used in mobile
+ phones. The standard defines 4 display architecture types and this binding is
+ for type 1 which has full frame memory. There are 3 interface types in the
+ standard and type C is the serial interface.
+
+ The standard defines the following interface signals for type C:
+ - Power:
+ - Vdd: Power supply for display module
+ Called power-supply in this binding.
+ - Vddi: Logic level supply for interface signals
+ Called io-supply in this binding.
+ - Interface:
+ - CSx: Chip select
+ - SCL: Serial clock
+ - Dout: Serial out
+ - Din: Serial in
+ - SDA: Bidrectional in/out
+ - D/CX: Data/command selection, high=data, low=command
+ Called dc-gpios in this binding.
+ - RESX: Reset when low
+ Called reset-gpios in this binding.
+
+ The type C interface has 3 options:
+
+ - Option 1: 9-bit mode and D/CX as the 9th bit
+ | Command | the next command or following data |
+ |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ - Option 2: 16-bit mode and D/CX as a 9th bit
+ | Command or data |
+ |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ - Option 3: 8-bit mode and D/CX as a separate interface line
+ | Command or data |
+ |<D7><D6><D5><D4><D3><D2><D1><D0>|
+
+ The panel resolution is specified using the panel-timing node properties
+ hactive (width) and vactive (height). The other mandatory panel-timing
+ properties should be set to zero except clock-frequency which can be
+ optionally set to inform about the actual pixel clock frequency.
+
+ If the panel is wired to the controller at an offset specify this using
+ hback-porch (x-offset) and vback-porch (y-offset).
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - saef,sftc154b
+ - sainsmart18
+ - shineworld,lh133k
+ - const: panel-mipi-dbi-spi
+
+ write-only:
+ type: boolean
+ description:
+ Controller is not readable (ie. Din (MISO on the SPI interface) is not
+ wired up).
+
+ dc-gpios:
+ maxItems: 1
+ description: |
+ Controller data/command selection (D/CX) in 4-line SPI mode.
+ If not set, the controller is in 3-line SPI mode.
+
+ io-supply:
+ description: |
+ Logic level supply for interface signals (Vddi).
+ No need to set if this is the same as power-supply.
+
+ spi-3wire: true
+
+required:
+ - compatible
+ - reg
+ - width-mm
+ - height-mm
+ - panel-timing
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0{
+ compatible = "sainsmart18", "panel-mipi-dbi-spi";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ write-only;
+
+ backlight = <&backlight>;
+
+ width-mm = <35>;
+ height-mm = <28>;
+
+ panel-timing {
+ hactive = <160>;
+ vactive = <128>;
+ hback-porch = <0>;
+ vback-porch = <0>;
+ clock-frequency = <0>;
+ hfront-porch = <0>;
+ hsync-len = <0>;
+ vfront-porch = <0>;
+ vsync-len = <0>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/panel-simple-dsi.yaml b/Bindings/display/panel/panel-simple-dsi.yaml
new file mode 100644
index 0000000..f9160d7
--- /dev/null
+++ b/Bindings/display/panel/panel-simple-dsi.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple DSI panels with a single power-supply
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+ This binding file is a collection of the DSI panels that
+ requires only a single power-supply.
+ There are optionally a backlight and an enable GPIO.
+ The panel may use an OF graph binding for the association to the display,
+ or it may be a direct child node of the display.
+
+ If the panel is more advanced a dedicated binding file is required.
+
+properties:
+
+ compatible:
+ enum:
+ # compatible must be listed in alphabetical order, ordered by compatible.
+ # The description in the comment is mandatory for each compatible.
+
+ # AU Optronics Corporation 8.0" WUXGA TFT LCD panel
+ - auo,b080uan01
+ # Boe Corporation 8.0" WUXGA TFT LCD panel
+ - boe,tv080wum-nl0
+ # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
+ - innolux,p079zca
+ # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel
+ - jdi,fhd-r63452
+ # Khadas TS050 5" 1080x1920 LCD panel
+ - khadas,ts050
+ # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
+ - kingdisplay,kd097d04
+ # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
+ - lg,acx467akm-7
+ # LG Corporation 7" WXGA TFT LCD panel
+ - lg,ld070wx3-sl01
+ # LG Corporation 5" HD TFT LCD panel
+ - lg,lh500wx1-sd03
+ # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
+ - osddisplays,osd101t2587-53ts
+ # Panasonic 10" WUXGA TFT LCD panel
+ - panasonic,vvx10f004b00
+ # Panasonic 10" WUXGA TFT LCD panel
+ - panasonic,vvx10f034n00
+ # Samsung s6e3fc2x01 1080x2340 AMOLED panel
+ - samsung,s6e3fc2x01
+ # Samsung sofef00 1080x2280 AMOLED panel
+ - samsung,sofef00
+ # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel
+ - tdo,tl070wsh30
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ backlight: true
+ enable-gpios: true
+ reset-gpios: true
+ port: true
+ power-supply: true
+ vddio-supply: true
+
+allOf:
+ - $ref: panel-common.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - samsung,s6e3fc2x01
+ - samsung,sofef00
+ then:
+ properties:
+ power-supply: false
+ required:
+ - vddio-supply
+ else:
+ properties:
+ vddio-supply: false
+ required:
+ - power-supply
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "panasonic,vvx10f034n00";
+ reg = <0>;
+ power-supply = <&vcc_lcd_reg>;
+
+ port {
+ panel: endpoint {
+ remote-endpoint = <<dc_out>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
new file mode 100644
index 0000000..a5a596f
--- /dev/null
+++ b/Bindings/display/panel/panel-simple-lvds-dual-ports.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple-lvds-dual-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple LVDS panels with one power supply and dual LVDS ports
+
+maintainers:
+ - Liu Ying <victor.liu@nxp.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+ This binding file is a collection of the LVDS panels that
+ has dual LVDS ports and requires only a single power-supply.
+ The first port receives odd pixels, and the second port receives even pixels.
+ There are optionally a backlight and an enable GPIO.
+ The panel may use an OF graph binding for the association to the display,
+ or it may be a direct child node of the display.
+
+ If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+
+ compatible:
+ enum:
+ # compatible must be listed in alphabetical order, ordered by compatible.
+ # The description in the comment is mandatory for each compatible.
+
+ # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
+ - auo,g133han01
+ # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
+ - auo,g185han01
+ # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel
+ - auo,g190ean01
+ # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel
+ - koe,tx26d202vm0bwa
+ # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
+ - nlt,nl192108ac18-02d
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: The first sink port.
+
+ properties:
+ dual-lvds-odd-pixels:
+ type: boolean
+ description: The first sink port for odd pixels.
+
+ required:
+ - dual-lvds-odd-pixels
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: The second sink port.
+
+ properties:
+ dual-lvds-even-pixels:
+ type: boolean
+ description: The second sink port for even pixels.
+
+ required:
+ - dual-lvds-even-pixels
+
+ required:
+ - port@0
+ - port@1
+
+ backlight: true
+ enable-gpios: true
+ power-supply: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - ports
+ - power-supply
+
+examples:
+ - |
+ panel: panel-lvds {
+ compatible = "koe,tx26d202vm0bwa";
+ power-supply = <&vdd_lcd_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ dual-lvds-odd-pixels;
+ reg = <0>;
+
+ panel_lvds0_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1 {
+ dual-lvds-even-pixels;
+ reg = <1>;
+
+ panel_lvds1_in: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/panel-simple.yaml b/Bindings/display/panel/panel-simple.yaml
new file mode 100644
index 0000000..11422af
--- /dev/null
+++ b/Bindings/display/panel/panel-simple.yaml
@@ -0,0 +1,392 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple panels with one power supply
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+ This binding file is a collection of the simple (dumb) panels that
+ requires only a single power-supply.
+ There are optionally a backlight and an enable GPIO.
+ The panel may use an OF graph binding for the association to the display,
+ or it may be a direct child node of the display.
+
+ If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: ../lvds-data-mapping.yaml#
+
+properties:
+ compatible:
+ enum:
+ # compatible must be listed in alphabetical order, ordered by compatible.
+ # The description in the comment is mandatory for each compatible.
+
+ # Ampire AM-1280800N3TZQW-T00H 10.1" WQVGA TFT LCD panel
+ - ampire,am-1280800n3tzqw-t00h
+ # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
+ - ampire,am-480272h3tmqw-t01h
+ # Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel
+ - ampire,am-800480l1tmqw-t00h
+ # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
+ - ampire,am800480r3tmqwa1h
+ # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel
+ - ampire,am800600p5tmqw-tb8h
+ # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+ - auo,b101aw03
+ # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+ - auo,b101ean01
+ # AU Optronics Corporation 10.1" WXGA TFT LCD panel
+ - auo,b101xtn01
+ # AUO B116XAK01 eDP TFT LCD panel
+ - auo,b116xa01
+ # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
+ - auo,b116xw03
+ # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+ - auo,b133han05
+ # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+ - auo,b133htn01
+ # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
+ - auo,b133xtn01
+ # AU Optronics Corporation 14.0" FHD (1920x1080) color TFT-LCD panel
+ - auo,b140han06
+ # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
+ - auo,g070vvn01
+ # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
+ - auo,g101evn010
+ # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
+ - auo,g104sn02
+ # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel
+ - auo,g121ean01
+ # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel
+ - auo,g156xtn01
+ # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
+ - auo,p320hvn03
+ # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
+ - auo,t215hvn01
+ # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
+ - avic,tm070ddh03
+ # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
+ - boe,ev121wxm-n10-1850
+ # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
+ - boe,hv070wsa-100
+ # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
+ - boe,nv101wxmn51
+ # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
+ - boe,nv110wtm-n61
+ # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
+ - boe,nv133fhm-n61
+ # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
+ - boe,nv133fhm-n62
+ # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
+ - boe,nv140fhmn49
+ # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
+ - cdtech,s043wq26h-ct7
+ # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel
+ - cdtech,s070pws19hp-fc21
+ # CDTech(H.K.) Electronics Limited 7" WVGA (800x480) TFT LCD Panel
+ - cdtech,s070swv29hg-dc44
+ # CDTech(H.K.) Electronics Limited 7" 800x480 color TFT-LCD panel
+ - cdtech,s070wv95-ct16
+ # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel
+ - chefree,ch101olhlwh-002
+ # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+ - chunghwa,claa101wa01a
+ # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+ - chunghwa,claa101wb01
+ # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+ - chunghwa,claa101wb03
+ # DataImage, Inc. 4.3" WQVGA (480x272) TFT LCD panel with 24-bit parallel interface.
+ - dataimage,fg040346dsswbg04
+ # DataImage, Inc. 10.1" WXGA (1280×800) TFT LCD panel
+ - dataimage,fg1001l0dsswmg01
+ # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
+ - dataimage,scf0700c48ggu18
+ # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
+ - dlc,dlc1010gig
+ # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
+ - edt,et035012dm6
+ # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
+ - edt,et057090dhu
+ - edt,et070080dh6
+ # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with
+ # capacitive multitouch
+ - edt,etm0350g0dh6
+ # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch
+ - edt,etm043080dh6gp
+ # Emerging Display Technology Corp. 480x272 TFT Display
+ - edt,etm0430g0dh6
+ # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+ # Same as ETM0700G0DH6 but with inverted pixel clock.
+ - edt,etm070080bdh6
+ # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+ # Same timings as the ETM0700G0DH6, but with resistive touch.
+ - edt,etm070080dh6
+ # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+ # Same display as the ETM0700G0BDH6, but with changed hardware for the
+ # backlight and the touch interface.
+ - edt,etm070080edh6
+ - edt,etm0700g0bdh6
+ # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
+ - edt,etm0700g0dh6
+ - edt,etm0700g0edh6
+ # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
+ - edt,etml0700y5dha
+ # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
+ # capacitive touch
+ - edt,etmv570g2dhu
+ # E Ink VB3300-KCA
+ - eink,vb3300-kca
+ # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
+ - evervision,vgg804821
+ # Foxlink Group 5" WVGA TFT LCD panel
+ - foxlink,fl500wvr00-a0t
+ # Frida FRD350H54004 3.5" QVGA TFT LCD panel
+ - frida,frd350h54004
+ # FriendlyELEC HD702E 800x1280 LCD panel
+ - friendlyarm,hd702e
+ # GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
+ - giantplus,gpg48273qs5
+ # GiantPlus GPM940B0 3.0" QVGA TFT LCD panel
+ - giantplus,gpm940b0
+ # HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
+ - hannstar,hsd070pww1
+ # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel
+ - hannstar,hsd100pxn1
+ # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
+ - hit,tx23d38vm0caa
+ # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel
+ - ivo,m133nwf4-r0
+ # Innolux AT043TN24 4.3" WQVGA TFT LCD panel
+ - innolux,at043tn24
+ # Innolux AT070TN92 7.0" WQVGA TFT LCD panel
+ - innolux,at070tn92
+ # Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel
+ - innolux,g070ace-l01
+ # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
+ - innolux,g070y2-l01
+ # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel
+ - innolux,g070y2-t02
+ # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel
+ - innolux,g101ice-l01
+ # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
+ - innolux,g121i1-l01
+ # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
+ - innolux,g121x1-l03
+ # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+ - innolux,n116bca-ea1
+ # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+ - innolux,n116bge
+ # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
+ - innolux,n125hce-gn1
+ # InnoLux 15.6" FHD (1920x1080) TFT LCD panel
+ - innolux,g156hce-l01
+ # InnoLux 15.6" WXGA TFT LCD panel
+ - innolux,n156bge-l21
+ # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
+ - innolux,p120zdg-bf1
+ # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
+ - innolux,zj070na-01p
+ # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
+ - kingdisplay,kd116n21-30nv-a010
+ # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
+ - koe,tx14d24vm1bpa
+ # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
+ - koe,tx31d200vm0baa
+ # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT
+ - kyo,tcg070wvlq
+ # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel
+ - kyo,tcg121xglp
+ # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel
+ - lemaker,bl035-rgb-002
+ # LG 7" (800x480 pixels) TFT LCD panel
+ - lg,lb070wv8
+ # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
+ - lg,lp079qx1-sp0v
+ # LG 9.7" (2048x1536 pixels) TFT LCD panel
+ - lg,lp097qx1-spa1
+ # LG 12.0" (1920x1280 pixels) TFT LCD panel
+ - lg,lp120up1
+ # LG 12.9" (2560x1700 pixels) TFT LCD panel
+ - lg,lp129qe
+ # Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module
+ - logictechno,lt161010-2nhc
+ # Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module
+ - logictechno,lt161010-2nhr
+ # Logic Technologies LT170410-2WHC 10.1" 1280x800 IPS TFT Cap Touch Mod.
+ - logictechno,lt170410-2whc
+ # Logic Technologies LTTD800x480 L2RT 7" 800x480 TFT Resistive Touch Module
+ - logictechno,lttd800480070-l2rt
+ # Logic Technologies LTTD800480070-L6WH-RT 7” 800x480 TFT Resistive Touch Module
+ - logictechno,lttd800480070-l6wh-rt
+ # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
+ - mitsubishi,aa070mc01-ca1
+ # Mitsubishi AA084XE01 8.4" XGA TFT LCD panel
+ - mitsubishi,aa084xe01
+ # Multi-Inno Technology Co.,Ltd MI0700S4T-6 7" 800x480 TFT Resistive Touch Module
+ - multi-inno,mi0700s4t-6
+ # Multi-Inno Technology Co.,Ltd MI0800FT-9 8" 800x600 TFT Resistive Touch Module
+ - multi-inno,mi0800ft-9
+ # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod.
+ - multi-inno,mi1010ait-1cp
+ # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel
+ - nec,nl12880bc20-05
+ # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
+ - nec,nl4827hc19-05b
+ # Netron-DY E231732 7.0" WSVGA TFT LCD panel
+ - netron-dy,e231732
+ # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
+ - neweast,wjfh116008a
+ # Newhaven Display International 480 x 272 TFT LCD panel
+ - newhaven,nhd-4.3-480272ef-atxl
+ # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
+ - nvd,9128
+ # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
+ - okaya,rs800480t-7x0gp
+ # Olimex 4.3" TFT LCD panel
+ - olimex,lcd-olinuxino-43-ts
+ # On Tat Industrial Company 7" DPI TFT panel.
+ - ontat,yx700wv03
+ # OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel
+ - ortustech,com37h3m05dtc
+ # OrtusTech COM37H3M99DTC Blanview 3.7" VGA portrait TFT-LCD panel
+ - ortustech,com37h3m99dtc
+ # OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel
+ - ortustech,com43h4m85ulc
+ # OSD Displays OSD070T1718-19TS 7" WVGA TFT LCD panel
+ - osddisplays,osd070t1718-19ts
+ # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
+ - osddisplays,osd101t2045-53ts
+ # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
+ - powertip,ph800480t013-idf02
+ # QiaoDian XianShi Corporation 4"3 TFT LCD panel
+ - qiaodian,qd43003c0-40
+ # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel
+ - qishenglong,gopher2b-lcd
+ # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800
+ - rocktech,rk101ii01d-ct
+ # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
+ - rocktech,rk070er9427
+ # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel
+ - rocktech,rk043fn48h
+ # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
+ - samsung,atna33xc20
+ # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
+ - samsung,lsn122dl01-c01
+ # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel
+ - samsung,ltl101al01
+ # Samsung Electronics 10.1" WSVGA TFT LCD panel
+ - samsung,ltn101nt05
+ # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
+ - samsung,ltn140at29-301
+ # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel
+ - satoz,sat050at40h12r2
+ # Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
+ - sharp,lq035q7db03
+ # Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel
+ - sharp,lq070y3dg3b
+ # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
+ - sharp,lq101k1ly04
+ # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
+ - sharp,lq123p1jx31
+ # Sharp 14" (1920x1080 pixels) TFT LCD panel
+ - sharp,lq140m1jw46
+ # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
+ - sharp,ls020b1dd01d
+ # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
+ - shelly,sca07010-bfn-lnn
+ # Starry KR070PE2T 7" WVGA TFT LCD panel
+ - starry,kr070pe2t
+ # Starry 12.2" (1920x1200 pixels) TFT LCD panel
+ - starry,kr122ea0sra
+ # Startek KD070WVFPA043-C069A 7" TFT LCD panel
+ - startek,kd070wvfpa
+ # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
+ - team-source-display,tst043015cmhx
+ # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
+ - tianma,tm070jdhg30
+ # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel
+ - tianma,tm070jvhg33
+ # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel
+ - tianma,tm070rvhg71
+ # Toshiba 8.9" WXGA (1280x768) TFT LCD panel
+ - toshiba,lt089ac29000
+ # TPK U.S.A. LLC Fusion 7" 800 x 480 (WVGA) LCD panel with capacitive touch
+ - tpk,f07a-0102
+ # TPK U.S.A. LLC Fusion 10.1" 1024 x 600 (WSVGA) LCD panel with capacitive touch
+ - tpk,f10a-0102
+ # United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel
+ # Supported are LVDS versions (-11T, -19T) and parallel ones
+ # (-T, -1T, -7T, -20T).
+ - urt,umsh-8596md-t
+ - urt,umsh-8596md-1t
+ - urt,umsh-8596md-7t
+ - urt,umsh-8596md-11t
+ - urt,umsh-8596md-19t
+ - urt,umsh-8596md-20t
+ # Vivax TPC-9150 tablet 9.0" WSVGA TFT LCD panel
+ - vivax,tpc9150-panel
+ # VXT 800x480 color TFT LCD panel
+ - vxt,vl050-8048nt-c01
+ # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel
+ - winstar,wf35ltiacd
+ # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel
+ - yes-optoelectronics,ytc700tlag-05-201c
+
+ backlight: true
+ ddc-i2c-bus: true
+ enable-gpios: true
+ port: true
+ power-supply: true
+ no-hpd: true
+ hpd-gpios: true
+ data-mapping: true
+
+if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: innolux,g101ice-l01
+then:
+ properties:
+ data-mapping: false
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+examples:
+ - |
+ panel_rgb: panel-rgb {
+ compatible = "ampire,am-480272h3tmqw-t01h";
+ power-supply = <&vcc_lcd_reg>;
+
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <<dc_out_rgb>;
+ };
+ };
+ };
+ - |
+ panel_lvds: panel-lvds {
+ compatible = "innolux,g101ice-l01";
+ power-supply = <&vcc_lcd_reg>;
+
+ data-mapping = "jeida-24";
+
+ port {
+ panel_in_lvds: endpoint {
+ remote-endpoint = <<dc_out_lvds>;
+ };
+ };
+ };
diff --git a/Bindings/display/panel/panel-timing.yaml b/Bindings/display/panel/panel-timing.yaml
new file mode 100644
index 0000000..aea69b8
--- /dev/null
+++ b/Bindings/display/panel/panel-timing.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-timing.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: panel timing
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+ There are different ways of describing the timing data of a panel. The
+ devicetree representation corresponds to the one commonly found in datasheets
+ for panels.
+
+ The parameters are defined as seen in the following illustration.
+
+ +-------+----------+-------------------------------------+----------+
+ | | | ^ | |
+ | | | |vsync_len | |
+ | | | v | |
+ +-------+----------+-------------------------------------+----------+
+ | | | ^ | |
+ | | | |vback_porch | |
+ | | | v | |
+ +-------+----------#######################################----------+
+ | | # ^ # |
+ | | # | # |
+ | hsync | hback # | # hfront |
+ | len | porch # | hactive # porch |
+ |<----->|<-------->#<-------+--------------------------->#<-------->|
+ | | # | # |
+ | | # |vactive # |
+ | | # | # |
+ | | # v # |
+ +-------+----------#######################################----------+
+ | | | ^ | |
+ | | | |vfront_porch | |
+ | | | v | |
+ +-------+----------+-------------------------------------+----------+
+
+
+ The following is the panel timings shown with time on the x-axis.
+ This matches the timing diagrams often found in data sheets.
+
+ Active Front Sync Back
+ Region Porch Porch
+ <-----------------------><----------------><-------------><-------------->
+ //////////////////////|
+ ////////////////////// |
+ ////////////////////// |.................. ................
+ _______________
+
+ Timing can be specified either as a typical value or as a tuple
+ of min, typ, max values.
+
+properties:
+
+ clock-frequency:
+ description: Panel clock in Hz
+
+ hactive:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Horizontal panel resolution in pixels
+
+ vactive:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Vertical panel resolution in pixels
+
+ hfront-porch:
+ description: Horizontal front porch panel timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of pixels
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of pixels
+
+ hback-porch:
+ description: Horizontal back porch timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of pixels
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of pixels
+
+ hsync-len:
+ description: Horizontal sync length panel timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of pixels
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of pixels
+
+ vfront-porch:
+ description: Vertical front porch panel timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of lines
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of lines
+
+ vback-porch:
+ description: Vertical back porch panel timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of lines
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of lines
+
+ vsync-len:
+ description: Vertical sync length panel timing
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ oneOf:
+ - maxItems: 1
+ items:
+ description: typical number of lines
+ - minItems: 3
+ maxItems: 3
+ items:
+ description: min, typ, max number of lines
+
+ hsync-active:
+ description: |
+ Horizontal sync pulse.
+ 0 selects active low, 1 selects active high.
+ If omitted then it is not used by the hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ vsync-active:
+ description: |
+ Vertical sync pulse.
+ 0 selects active low, 1 selects active high.
+ If omitted then it is not used by the hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ de-active:
+ description: |
+ Data enable.
+ 0 selects active low, 1 selects active high.
+ If omitted then it is not used by the hardware
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ pixelclk-active:
+ description: |
+ Data driving on rising or falling edge.
+ Use 0 to drive pixel data on falling edge and
+ sample data on rising edge.
+ Use 1 to drive pixel data on rising edge and
+ sample data on falling edge
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ syncclk-active:
+ description: |
+ Drive sync on rising or sample sync on falling edge.
+ If not specified then the setup is as specified by pixelclk-active.
+ Use 0 to drive sync on falling edge and
+ sample sync on rising edge of pixel clock.
+ Use 1 to drive sync on rising edge and
+ sample sync on falling edge of pixel clock
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ interlaced:
+ type: boolean
+ description: Enable interlaced mode
+
+ doublescan:
+ type: boolean
+ description: Enable double scan mode
+
+ doubleclk:
+ type: boolean
+ description: Enable double clock mode
+
+required:
+ - clock-frequency
+ - hactive
+ - vactive
+ - hfront-porch
+ - hback-porch
+ - hsync-len
+ - vfront-porch
+ - vback-porch
+ - vsync-len
+
+additionalProperties: false
+
+...
diff --git a/Bindings/display/panel/pda,91-00156-a0.yaml b/Bindings/display/panel/pda,91-00156-a0.yaml
new file mode 100644
index 0000000..ccd3623
--- /dev/null
+++ b/Bindings/display/panel/pda,91-00156-a0.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/pda,91-00156-a0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PDA 91-00156-A0 5.0" WVGA TFT LCD panel
+
+maintainers:
+ - Cristian Birsan <cristian.birsan@microchip.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: pda,91-00156-a0
+
+ power-supply: true
+ backlight: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+ - backlight
+
+...
diff --git a/Bindings/display/panel/raspberrypi,7inch-touchscreen.yaml b/Bindings/display/panel/raspberrypi,7inch-touchscreen.yaml
new file mode 100644
index 0000000..22a083f
--- /dev/null
+++ b/Bindings/display/panel/raspberrypi,7inch-touchscreen.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raspberrypi,7inch-touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The official 7" (800x480) Raspberry Pi touchscreen
+
+maintainers:
+ - Eric Anholt <eric@anholt.net>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+ This DSI panel contains:
+
+ - TC358762 DSI->DPI bridge
+ - Atmel microcontroller on I2C for power sequencing the DSI bridge and
+ controlling backlight
+ - Touchscreen controller on I2C for touch input
+
+ and this binding covers the DSI display parts but not its touch input.
+
+properties:
+ compatible:
+ const: raspberrypi,7inch-touchscreen-panel
+
+ reg:
+ const: 0x45
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - port
+
+additionalProperties: false
+
+examples:
+ - |+
+ dsi1: dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port {
+ dsi_out_port: endpoint {
+ remote-endpoint = <&panel_dsi_port>;
+ };
+ };
+ };
+
+ i2c_dsi: i2c {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ scl-gpios = <&gpio 28 0>;
+ sda-gpios = <&gpio 29 0>;
+
+ lcd@45 {
+ compatible = "raspberrypi,7inch-touchscreen-panel";
+ reg = <0x45>;
+
+ port {
+ panel_dsi_port: endpoint {
+ remote-endpoint = <&dsi_out_port>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/raydium,rm67191.yaml b/Bindings/display/panel/raydium,rm67191.yaml
new file mode 100644
index 0000000..d62fd69
--- /dev/null
+++ b/Bindings/display/panel/raydium,rm67191.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
+
+maintainers:
+ - Robert Chiras <robert.chiras@nxp.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: raydium,rm67191
+
+ reg: true
+ port: true
+ reset-gpios: true
+ width-mm: true
+ height-mm: true
+
+ dsi-lanes:
+ description: Number of DSI lanes to be used must be <3> or <4>
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [3, 4]
+
+ v3p3-supply:
+ description: phandle to 3.3V regulator that powers the VDD_3V3 pin
+
+ v1p8-supply:
+ description: phandle to 1.8V regulator that powers the VDD_1V8 pin
+
+ video-mode:
+ description: |
+ 0 - burst-mode
+ 1 - non-burst with sync event
+ 2 - non-burst with sync pulse
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+required:
+ - compatible
+ - reg
+ - dsi-lanes
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "raydium,rm67191";
+ reg = <0>;
+ reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ dsi-lanes = <4>;
+ width-mm = <68>;
+ height-mm = <121>;
+ video-mode = <1>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mipi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/raydium,rm68200.yaml b/Bindings/display/panel/raydium,rm68200.yaml
new file mode 100644
index 0000000..46fe101
--- /dev/null
+++ b/Bindings/display/panel/raydium,rm68200.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
+
+maintainers:
+ - Philippe CORNU <philippe.cornu@foss.st.com>
+
+description: |
+ The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
+ panel connected using a MIPI-DSI video interface.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+
+ compatible:
+ const: raydium,rm68200
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ backlight: true
+ enable-gpios: true
+ port: true
+ power-supply: true
+
+ reset-gpios:
+ maxItems: 1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+ - reg
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "raydium,rm68200";
+ reg = <0>;
+ reset-gpios = <&gpiof 15 0>;
+ power-supply = <&v1v8>;
+ backlight = <&pwm_backlight>;
+ };
+ };
+...
diff --git a/Bindings/display/panel/raydium,rm692e5.yaml b/Bindings/display/panel/raydium,rm692e5.yaml
new file mode 100644
index 0000000..f436ba6
--- /dev/null
+++ b/Bindings/display/panel/raydium,rm692e5.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm692e5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM692E5 based DSI display panels
+
+maintainers:
+ - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+ The Raydium RM692E5 is a generic DSI Panel IC used to control
+ AMOLED panels.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: fairphone,fp5-rm692e5-boe
+ - const: raydium,rm692e5
+
+ dvdd-supply:
+ description: Digital voltage rail
+
+ vci-supply:
+ description: Analog voltage rail
+
+ vddio-supply:
+ description: I/O voltage rail
+
+ reg: true
+ port: true
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - dvdd-supply
+ - vci-supply
+ - vddio-supply
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5";
+ reg = <0>;
+
+ reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+ dvdd-supply = <&vreg_oled_vci>;
+ vci-supply = <&vreg_l12c>;
+ vddio-supply = <&vreg_oled_dvdd>;
+
+ port {
+ panel_in_0: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/rocktech,jh057n00900.yaml b/Bindings/display/panel/rocktech,jh057n00900.yaml
new file mode 100644
index 0000000..97cccd8
--- /dev/null
+++ b/Bindings/display/panel/rocktech,jh057n00900.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+
+maintainers:
+ - Ondrej Jirman <megi@xff.cz>
+ - Guido Gŭnther <agx@sigxcpu.org>
+
+description:
+ Rocktech JH057N00900 is a 720x1440 TFT LCD panel
+ connected using a MIPI-DSI video interface.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
+ - anbernic,rg353v-panel-v2
+ # Powkiddy RGB30 3.0" 720x720 TFT LCD panel
+ - powkiddy,rgb30-panel
+ # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
+ - rocktech,jh057n00900
+ # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
+ - xingbangda,xbd599
+
+ port: true
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ vcc-supply:
+ description: Panel power supply
+
+ iovcc-supply:
+ description: I/O voltage supply
+
+ reset-gpios: true
+
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - vcc-supply
+ - iovcc-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "rocktech,jh057n00900";
+ reg = <0>;
+ vcc-supply = <®_2v8_p>;
+ iovcc-supply = <®_1v8_p>;
+ reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/ronbo,rb070d30.yaml b/Bindings/display/panel/ronbo,rb070d30.yaml
new file mode 100644
index 0000000..95ce22c
--- /dev/null
+++ b/Bindings/display/panel/ronbo,rb070d30.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR X11)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ronbo,rb070d30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ronbo RB070D30 DSI Display Panel
+
+maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ compatible:
+ const: ronbo,rb070d30
+
+ reg:
+ description: MIPI-DSI virtual channel
+
+ power-gpios:
+ description: GPIO used for the power pin
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO used for the reset pin
+ maxItems: 1
+
+ shlr-gpios:
+ description: GPIO used for the shlr pin (horizontal flip)
+ maxItems: 1
+
+ updn-gpios:
+ description: GPIO used for the updn pin (vertical flip)
+ maxItems: 1
+
+ vcc-lcd-supply:
+ description: Power regulator
+
+ backlight:
+ description: Backlight used by the panel
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - power-gpios
+ - reg
+ - reset-gpios
+ - shlr-gpios
+ - updn-gpios
+ - vcc-lcd-supply
+
+additionalProperties: false
diff --git a/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml
new file mode 100644
index 0000000..ccc4825
--- /dev/null
+++ b/Bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,amoled-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMOLED MIPI-DSI panels
+
+maintainers:
+ - Hoegeun Kwon <hoegeun.kwon@samsung.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,s6e3ha2
+ - samsung,s6e3hf2
+ then:
+ required:
+ - enable-gpios
+
+properties:
+ compatible:
+ enum:
+ # Samsung S6E63J0X03 1.63" 320x320 AMOLED panel
+ - samsung,s6e63j0x03
+ # Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+ - samsung,s6e3ha2
+ # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
+ - samsung,s6e3hf2
+
+ reg: true
+ reset-gpios: true
+ enable-gpios: true
+ te-gpios: true
+
+ vdd3-supply:
+ description: I/O voltage supply
+
+ vci-supply:
+ description: voltage supply for analog circuits
+
+required:
+ - compatible
+ - reg
+ - vdd3-supply
+ - vci-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,s6e3ha2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,ams495qa01.yaml b/Bindings/display/panel/samsung,ams495qa01.yaml
new file mode 100644
index 0000000..58fa073
--- /dev/null
+++ b/Bindings/display/panel/samsung,ams495qa01.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ams495qa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS495QA01 panel with Magnachip D53E6EA8966 controller
+
+maintainers:
+ - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: samsung,ams495qa01
+
+ reg: true
+ reset-gpios:
+ description: reset gpio, must be GPIO_ACTIVE_LOW
+ elvdd-supply:
+ description: regulator that supplies voltage to the panel display
+ enable-gpios: true
+ port: true
+ vdd-supply:
+ description: regulator that supplies voltage to panel logic
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "samsung,ams495qa01";
+ reg = <0>;
+ reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc_3v3>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,ld9040.yaml b/Bindings/display/panel/samsung,ld9040.yaml
new file mode 100644
index 0000000..c0fabeb
--- /dev/null
+++ b/Bindings/display/panel/samsung,ld9040.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ld9040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
+
+maintainers:
+ - Andrzej Hajda <a.hajda@samsung.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: samsung,ld9040
+
+ display-timings: true
+ port: true
+ reg: true
+ reset-gpios: true
+
+ vdd3-supply:
+ description: core voltage supply
+
+ vci-supply:
+ description: voltage supply for analog circuits
+
+ power-on-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: delay after turning regulators on [ms]
+
+ reset-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: delay after reset sequence [ms]
+
+ panel-width-mm:
+ description: physical panel width [mm]
+
+ panel-height-mm:
+ description: physical panel height [mm]
+
+ spi-cpha: true
+ spi-cpol: true
+
+required:
+ - compatible
+ - reg
+ - vdd3-supply
+ - vci-supply
+ - reset-gpios
+ - display-timings
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lcd@0 {
+ compatible = "samsung,ld9040";
+
+ reg = <0>;
+ vdd3-supply = <&ldo7_reg>;
+ vci-supply = <&ldo17_reg>;
+ reset-gpios = <&gpy4 5 0>;
+ spi-max-frequency = <1200000>;
+ spi-cpol;
+ spi-cpha;
+ power-on-delay = <10>;
+ reset-delay = <10>;
+ panel-width-mm = <90>;
+ panel-height-mm = <154>;
+
+ display-timings {
+ timing {
+ clock-frequency = <23492370>;
+ hactive = <480>;
+ vactive = <800>;
+ hback-porch = <16>;
+ hfront-porch = <16>;
+ vback-porch = <2>;
+ vfront-porch = <28>;
+ hsync-len = <2>;
+ vsync-len = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <0>;
+ pixelclk-active = <0>;
+ };
+ };
+
+ port {
+ lcd_ep: endpoint {
+ remote-endpoint = <&fimd_dpi_ep>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,lms380kf01.yaml b/Bindings/display/panel/samsung,lms380kf01.yaml
new file mode 100644
index 0000000..70ffc88
--- /dev/null
+++ b/Bindings/display/panel/samsung,lms380kf01.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,lms380kf01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LMS380KF01 display panel
+
+description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile
+ Displays (SMD) utilizing the WideChips WS2401 display controller. It can be
+ used with internal or external backlight control.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: samsung,lms380kf01
+
+ reg: true
+
+ interrupts:
+ description: provides an optional ESD (electrostatic discharge)
+ interrupt that signals abnormalities in the display hardware.
+ This can also be raised for other reasons like erroneous
+ configuration.
+ maxItems: 1
+
+ reset-gpios: true
+
+ vci-supply:
+ description: regulator that supplies the VCI analog voltage
+ usually around 3.0 V
+
+ vccio-supply:
+ description: regulator that supplies the VCCIO voltage usually
+ around 1.8 V
+
+ backlight: true
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ spi-max-frequency:
+ maximum: 1200000
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - spi-cpha
+ - spi-cpol
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ compatible = "spi-gpio";
+ sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,lms380kf01";
+ spi-max-frequency = <1200000>;
+ spi-cpha;
+ spi-cpol;
+ reg = <0>;
+ vci-supply = <&lcd_3v0_reg>;
+ vccio-supply = <&lcd_1v8_reg>;
+ reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio>;
+ interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,lms397kf04.yaml b/Bindings/display/panel/samsung,lms397kf04.yaml
new file mode 100644
index 0000000..5e77cee
--- /dev/null
+++ b/Bindings/display/panel/samsung,lms397kf04.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,lms397kf04.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung LMS397KF04 display panel
+
+description: The datasheet claims this is based around a display controller
+ named DB7430 with a separate backlight controller.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: samsung,lms397kf04
+
+ reg: true
+
+ reset-gpios: true
+
+ vci-supply:
+ description: regulator that supplies the VCI analog voltage
+ usually around 3.0 V
+
+ vccio-supply:
+ description: regulator that supplies the VCCIO voltage usually
+ around 1.8 V
+
+ backlight: true
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ spi-max-frequency:
+ description: inherited as a SPI client node, the datasheet specifies
+ maximum 300 ns minimum cycle which gives around 3 MHz max frequency
+ maximum: 3000000
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - spi-cpha
+ - spi-cpol
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ compatible = "spi-gpio";
+ sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "samsung,lms397kf04";
+ spi-max-frequency = <3000000>;
+ spi-cpha;
+ spi-cpol;
+ reg = <0>;
+ vci-supply = <&lcd_3v0_reg>;
+ vccio-supply = <&lcd_1v8_reg>;
+ reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ backlight = <&ktd259>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,s6d16d0.yaml b/Bindings/display/panel/samsung,s6d16d0.yaml
new file mode 100644
index 0000000..66d1474
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6d16d0.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d16d0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D16D0 4" 864x480 AMOLED panel
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6d16d0
+
+ port: true
+ reg: true
+ reset-gpios: true
+
+ vdd1-supply:
+ description: I/O voltage supply
+
+required:
+ - compatible
+ - reg
+ - vdd1-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,s6d16d0";
+ reg = <0>;
+ vdd1-supply = <&foo>;
+ reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,s6d27a1.yaml b/Bindings/display/panel/samsung,s6d27a1.yaml
new file mode 100644
index 0000000..d273faf
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6d27a1.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d27a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D27A1 display panel
+
+description: The S6D27A1 is a 480x800 DPI display panel from Samsung Mobile
+ Displays (SMD).
+
+maintainers:
+ - Markuss Broks <markuss.broks@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6d27a1
+
+ reg: true
+
+ interrupts:
+ description: provides an optional ESD (electrostatic discharge)
+ interrupt that signals abnormalities in the display hardware.
+ This can also be raised for other reasons like erroneous
+ configuration.
+ maxItems: 1
+
+ reset-gpios: true
+
+ vci-supply:
+ description: regulator that supplies the VCI analog voltage
+ usually around 3.0 V
+
+ vccio-supply:
+ description: regulator that supplies the VCCIO voltage usually
+ around 1.8 V
+
+ backlight: true
+
+ spi-cpha: true
+
+ spi-cpol: true
+
+ spi-max-frequency:
+ maximum: 1200000
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - vci-supply
+ - vccio-supply
+ - spi-cpha
+ - spi-cpol
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ compatible = "spi-gpio";
+ sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "samsung,s6d27a1";
+ spi-max-frequency = <1200000>;
+ spi-cpha;
+ spi-cpol;
+ reg = <0>;
+ vci-supply = <&lcd_3v0_reg>;
+ vccio-supply = <&lcd_1v8_reg>;
+ reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio>;
+ interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,s6d7aa0.yaml b/Bindings/display/panel/samsung,s6d7aa0.yaml
new file mode 100644
index 0000000..45a236d
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6d7aa0.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D7AA0 MIPI-DSI LCD panel controller
+
+maintainers:
+ - Artur Weber <aweber.kernel@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ # 1280x800 LSL080AL02 panel
+ - samsung,lsl080al02
+ # 1024x768 LSL080AL03 panel
+ - samsung,lsl080al03
+ # 1024x768 LTL101AT01 panel
+ - samsung,ltl101at01
+ - const: samsung,s6d7aa0
+
+ reg: true
+
+ backlight:
+ description:
+ Backlight to use for the panel. If this property is set on panels
+ that have DSI-based backlight control (LSL080AL03 and LTL101AT01),
+ it overrides the DSI-based backlight.
+
+ reset-gpios:
+ description: Reset GPIO pin, usually GPIO_ACTIVE_LOW.
+
+ power-supply:
+ description:
+ Main power supply for the panel; the exact voltage differs between
+ panels, and is usually somewhere around 3.3-5v.
+
+ vmipi-supply:
+ description: VMIPI supply, usually 1.8v.
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,lsl080al02", "samsung,s6d7aa0";
+ reg = <0>;
+ power-supply = <&display_3v3_supply>;
+ reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,s6e63m0.yaml b/Bindings/display/panel/samsung,s6e63m0.yaml
new file mode 100644
index 0000000..6f1fc74
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6e63m0.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e63m0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung s6e63m0 AMOLED LCD panel
+
+maintainers:
+ - Jonathan Bakker <xc-racer2@live.ca>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/leds/backlight/common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6e63m0
+
+ reg: true
+ reset-gpios: true
+ port: true
+ default-brightness: true
+ max-brightness: true
+
+ spi-3wire: true
+ spi-cpha: true
+ spi-cpol: true
+
+ vdd3-supply:
+ description: VDD regulator
+
+ vci-supply:
+ description: VCI regulator
+
+required:
+ - compatible
+ - reset-gpios
+ - vdd3-supply
+ - vci-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0 {
+ compatible = "samsung,s6e63m0";
+ reg = <0>;
+ reset-gpios = <&mp05 5 1>;
+ vdd3-supply = <&ldo12_reg>;
+ vci-supply = <&ldo11_reg>;
+ spi-max-frequency = <1200000>;
+
+ port {
+ lcd_ep: endpoint {
+ remote-endpoint = <&fimd_ep>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
new file mode 100644
index 0000000..b749e9e
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e88a0-ams452ef01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS452EF01 AMOLED panel with S6E88A0 video mode DSI controller
+
+maintainers:
+ - Michael Srba <Michael.Srba@seznam.cz>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6e88a0-ams452ef01
+ reg: true
+ port: true
+ reset-gpios: true
+ vdd3-supply:
+ description: core voltage supply
+ vci-supply:
+ description: voltage supply for analog circuits
+
+required:
+ - compatible
+ - reg
+ - port
+ - vdd3-supply
+ - vci-supply
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ reg = <0>;
+
+ compatible = "samsung,s6e88a0-ams452ef01";
+
+ vdd3-supply = <&pm8916_l17>;
+ vci-supply = <®_vlcd_vci>;
+ reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/samsung,s6e8aa0.yaml b/Bindings/display/panel/samsung,s6e8aa0.yaml
new file mode 100644
index 0000000..200fbf1
--- /dev/null
+++ b/Bindings/display/panel/samsung,s6e8aa0.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
+
+maintainers:
+ - Andrzej Hajda <a.hajda@samsung.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: samsung,s6e8aa0
+
+ reg: true
+ reset-gpios: true
+ display-timings: true
+
+ vdd3-supply:
+ description: core voltage supply
+
+ vci-supply:
+ description: voltage supply for analog circuits
+
+ power-on-delay:
+ description: delay after turning regulators on [ms]
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ reset-delay:
+ description: delay after reset sequence [ms]
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ init-delay:
+ description: delay after initialization sequence [ms]
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ panel-width-mm:
+ description: physical panel width [mm]
+
+ panel-height-mm:
+ description: physical panel height [mm]
+
+ flip-horizontal:
+ description: boolean to flip image horizontally
+ type: boolean
+
+ flip-vertical:
+ description: boolean to flip image vertically
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - vdd3-supply
+ - vci-supply
+ - reset-gpios
+ - display-timings
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,s6e8aa0";
+ reg = <0>;
+ vdd3-supply = <&vcclcd_reg>;
+ vci-supply = <&vlcd_reg>;
+ reset-gpios = <&gpy4 5 0>;
+ power-on-delay = <50>;
+ reset-delay = <100>;
+ init-delay = <100>;
+ panel-width-mm = <58>;
+ panel-height-mm = <103>;
+ flip-horizontal;
+ flip-vertical;
+
+ display-timings {
+ timing0: timing-0 {
+ clock-frequency = <57153600>;
+ hactive = <720>;
+ vactive = <1280>;
+ hfront-porch = <5>;
+ hback-porch = <5>;
+ hsync-len = <5>;
+ vfront-porch = <13>;
+ vback-porch = <1>;
+ vsync-len = <2>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/seiko,43wvf1g.yaml b/Bindings/display/panel/seiko,43wvf1g.yaml
new file mode 100644
index 0000000..1df3cbb
--- /dev/null
+++ b/Bindings/display/panel/seiko,43wvf1g.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/seiko,43wvf1g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
+
+maintainers:
+ - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sii,43wvf1g
+
+ backlight: true
+ port: true
+
+ dvdd-supply:
+ description: 3v3 digital regulator
+
+ avdd-supply:
+ description: 5v analog regulator
+
+ enable-gpios: true
+
+required:
+ - compatible
+ - dvdd-supply
+ - avdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ panel {
+ compatible = "sii,43wvf1g";
+
+ backlight = <&backlight_display>;
+ dvdd-supply = <®_lcd_3v3>;
+ avdd-supply = <®_lcd_5v>;
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sgd,gktw70sdae4se.yaml b/Bindings/display/panel/sgd,gktw70sdae4se.yaml
new file mode 100644
index 0000000..e32d918
--- /dev/null
+++ b/Bindings/display/panel/sgd,gktw70sdae4se.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sgd,gktw70sdae4se.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon Goldentek Display GKTW70SDAE4SE 7" WVGA LVDS Display Panel
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/display/lvds.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: sgd,gktw70sdae4se
+
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: sgd,gktw70sdae4se
+ - const: panel-lvds
+
+ data-mapping:
+ const: jeida-18
+
+ width-mm:
+ const: 153
+
+ height-mm:
+ const: 86
+
+ panel-timing: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - port
+ - data-mapping
+ - width-mm
+ - height-mm
+ - panel-timing
+
+examples:
+ - |+
+ panel {
+ compatible = "sgd,gktw70sdae4se", "panel-lvds";
+
+ width-mm = <153>;
+ height-mm = <86>;
+
+ data-mapping = "jeida-18";
+
+ panel-timing {
+ clock-frequency = <32000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <39>;
+ hfront-porch = <39>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ hsync-len = <47>;
+ vsync-len = <2>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_encoder>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sharp,ld-d5116z01b.yaml b/Bindings/display/panel/sharp,ld-d5116z01b.yaml
new file mode 100644
index 0000000..fbb647e
--- /dev/null
+++ b/Bindings/display/panel/sharp,ld-d5116z01b.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ld-d5116z01b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
+
+maintainers:
+ - Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,ld-d5116z01b
+
+ power-supply: true
+ backlight: true
+ port: true
+ no-hpd: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+...
diff --git a/Bindings/display/panel/sharp,lq101r1sx01.yaml b/Bindings/display/panel/sharp,lq101r1sx01.yaml
new file mode 100644
index 0000000..57b44a0
--- /dev/null
+++ b/Bindings/display/panel/sharp,lq101r1sx01.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq101r1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 10.1" WQXGA TFT LCD panel
+
+maintainers:
+ - Thierry Reding <treding@nvidia.com>
+
+description: |
+ This panel requires a dual-channel DSI host to operate. It supports two modes:
+ - left-right: each channel drives the left or right half of the screen
+ - even-odd: each channel drives the even or odd lines of the screen
+
+ Each of the DSI channels controls a separate DSI peripheral. The peripheral
+ driven by the first link (DSI-LINK1), left or even, is considered the primary
+ peripheral and controls the device. The 'link2' property contains a phandle
+ to the peripheral driven by the second link (DSI-LINK2, right or odd).
+
+ Note that in video mode the DSI-LINK1 interface always provides the left/even
+ pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
+ is possible to program either link to drive the left/even or right/odd pixels
+ but for the sake of consistency this binding assumes that the same assignment
+ is chosen as for video mode.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: sharp,lq101r1sx03
+ - const: sharp,lq101r1sx01
+ - enum:
+ - sharp,lq101r1sx01
+
+ reg: true
+ power-supply: true
+ backlight: true
+
+ link2:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ phandle to the DSI peripheral on the secondary link. Note that the
+ presence of this property marks the containing node as DSI-LINK1
+
+required:
+ - compatible
+ - reg
+
+if:
+ required:
+ - link2
+then:
+ required:
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi0: dsi@fd922800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfd922800 0x200>;
+
+ panel: panel@0 {
+ compatible = "sharp,lq101r1sx01";
+ reg = <0>;
+
+ link2 = <&secondary>;
+
+ power-supply = <&power>;
+ backlight = <&backlight>;
+ };
+ };
+
+ dsi1: dsi@fd922a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfd922a00 0x200>;
+
+ secondary: panel@0 {
+ compatible = "sharp,lq101r1sx01";
+ reg = <0>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sharp,lq150x1lg11.yaml b/Bindings/display/panel/sharp,lq150x1lg11.yaml
new file mode 100644
index 0000000..92f2d12
--- /dev/null
+++ b/Bindings/display/panel/sharp,lq150x1lg11.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq150x1lg11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp 15" LQ150X1LG11 XGA TFT LCD panel
+
+maintainers:
+ - Peter Rosin <peda@axentia.se>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,lq150x1lg11
+
+ power-supply: true
+ backlight: true
+
+ rlud-gpios:
+ maxItems: 1
+ description: |
+ GPIO for the RL/UD (rotate 180 degrees) pin.
+ If rlud-gpios and/or sellvds-gpios are not specified,
+ the RL/UD and/or SELLVDS pins are assumed to be handled
+ appropriately by the hardware.
+
+ sellvds-gpios:
+ maxItems: 1
+ description: |
+ GPIO for the SELLVDS pin.
+ If rlud-gpios and/or sellvds-gpios are not specified,
+ the RL/UD and/or SELLVDS pins are assumed to be handled
+ appropriately by the hardware.
+
+required:
+ - compatible
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ panel {
+ compatible = "sharp,lq150x1lg11";
+
+ power-supply = <&vcc_3v3_reg>; /* VCC */
+
+ backlight = <&backlight>;
+ rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */
+ sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */
+ };
+
+...
diff --git a/Bindings/display/panel/sharp,ls037v7dw01.yaml b/Bindings/display/panel/sharp,ls037v7dw01.yaml
new file mode 100644
index 0000000..8c47a9b
--- /dev/null
+++ b/Bindings/display/panel/sharp,ls037v7dw01.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls037v7dw01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SHARP LS037V7DW01 TFT-LCD panel
+
+description: |
+ This panel can have zero to five GPIOs to configure to change configuration
+ between QVGA and VGA mode and the scan direction. As these pins can be also
+ configured with external pulls, all the GPIOs are considered optional with holes
+ in the array.
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,ls037v7dw01
+
+ label: true
+ enable-gpios: true
+ reset-gpios: true
+ port: true
+ power-supply: true
+
+ mode-gpios:
+ minItems: 1
+ maxItems: 3
+ description: |
+ GPIO ordered MO, LR, and UD as specified in LS037V7DW01.pdf
+ This panel can have zero to three GPIOs to configure to
+ change configuration between QVGA and VGA mode and the
+ scan direction. As these pins can be also configured
+ with external pulls, all the GPIOs are considered
+ optional with holes in the array.
+
+required:
+ - compatible
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ lcd0: display {
+ compatible = "sharp,ls037v7dw01";
+ power-supply = <&lcd_3v3>;
+ enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */
+ reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */
+ mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */
+ &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */
+ &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sharp,ls043t1le01.yaml b/Bindings/display/panel/sharp,ls043t1le01.yaml
new file mode 100644
index 0000000..a90d0d8
--- /dev/null
+++ b/Bindings/display/panel/sharp,ls043t1le01.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls043t1le01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 4.3" qHD TFT LCD panel
+
+maintainers:
+ - Werner Johansson <werner.johansson@sonymobile.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,ls043t1le01-qhd
+
+ reg: true
+ backlight: true
+ reset-gpios: true
+ port: true
+
+ avdd-supply:
+ description: handle of the regulator that provides the supply voltage
+
+required:
+ - compatible
+ - reg
+ - avdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sharp,ls043t1le01-qhd";
+ reg = <0>;
+ avdd-supply = <&pm8941_l22>;
+ backlight = <&pm8941_wled>;
+ reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sharp,ls060t1sx01.yaml b/Bindings/display/panel/sharp,ls060t1sx01.yaml
new file mode 100644
index 0000000..271c097
--- /dev/null
+++ b/Bindings/display/panel/sharp,ls060t1sx01.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls060t1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 6.0" FullHD TFT LCD panel
+
+maintainers:
+ - Dmitry Baryskov <dmitry.baryshkov@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,ls060t1sx01
+
+ reg: true
+ backlight: true
+ reset-gpios: true
+ port: true
+
+ avdd-supply:
+ description: handle of the regulator that provides the positive supply voltage
+ avee-supply:
+ description: handle of the regulator that provides the negative supply voltage
+ vddi-supply:
+ description: handle of the regulator that provides the I/O supply voltage
+ vddh-supply:
+ description: handle of the regulator that provides the analog supply voltage
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sharp,ls060t1sx01";
+ reg = <0>;
+ avdd-supply = <&pm8941_l22>;
+ backlight = <&backlight>;
+ reset-gpios = <&pm8916_gpios 25 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sitronix,st7701.yaml b/Bindings/display/panel/sitronix,st7701.yaml
new file mode 100644
index 0000000..4dc0cd4
--- /dev/null
+++ b/Bindings/display/panel/sitronix,st7701.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sitronix,st7701.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7701 based LCD panels
+
+maintainers:
+ - Jagan Teki <jagan@amarulasolutions.com>
+
+description: |
+ ST7701 designed for small and medium sizes of TFT LCD display, is
+ capable of supporting up to 480RGBX864 in resolution. It provides
+ several system interfaces like MIPI/RGB/SPI.
+
+ Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
+ inbuilt ST7701 chip.
+
+ Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel
+ which has built-in ST7701 chip.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - densitron,dmt028vghmcmi-1a
+ - elida,kd50t048a
+ - techstar,ts8550b
+ - const: sitronix,st7701
+
+ reg:
+ description: DSI virtual channel used by that screen
+ maxItems: 1
+
+ VCC-supply:
+ description: analog regulator for MIPI circuit
+
+ IOVCC-supply:
+ description: I/O system regulator
+
+ port: true
+ reset-gpios: true
+ rotation: true
+
+ backlight: true
+
+required:
+ - compatible
+ - reg
+ - VCC-supply
+ - IOVCC-supply
+ - port
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "techstar,ts8550b", "sitronix,st7701";
+ reg = <0>;
+ VCC-supply = <®_dldo2>;
+ IOVCC-supply = <®_dldo2>;
+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
+ backlight = <&backlight>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/panel/sitronix,st7789v.yaml b/Bindings/display/panel/sitronix,st7789v.yaml
new file mode 100644
index 0000000..ef162b5
--- /dev/null
+++ b/Bindings/display/panel/sitronix,st7789v.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sitronix,st7789v.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7789V RGB panel with SPI control bus
+
+maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - edt,et028013dma
+ - inanbo,t28cp45tn89-v17
+ - jasonic,jt240mhqs-hwt-ek-e3
+ - sitronix,st7789v
+
+ reg: true
+ reset-gpios: true
+ power-supply: true
+ backlight: true
+ port: true
+ rotation: true
+
+ spi-cpha: true
+ spi-cpol: true
+
+ spi-rx-bus-width:
+ minimum: 0
+ maximum: 1
+
+ dc-gpios:
+ maxItems: 1
+ description: DCX pin, Display data/command selection pin in parallel interface
+
+required:
+ - compatible
+ - reg
+ - power-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sitronix,st7789v";
+ reg = <0>;
+ reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
+ backlight = <&pwm_bl>;
+ power-supply = <&power>;
+ rotation = <180>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&tcon0_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sony,acx424akp.yaml b/Bindings/display/panel/sony,acx424akp.yaml
new file mode 100644
index 0000000..059cc6d
--- /dev/null
+++ b/Bindings/display/panel/sony,acx424akp.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony ACX424AKP/ACX424AKM 4" 480x864/480x854 AMOLED panel
+
+description: The Sony ACX424AKP and ACX424AKM are panels built around
+ the Novatek NT35560 display controller. The only difference is that
+ the AKM is configured to use 10 pixels less in the Y axis than the
+ AKP.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - sony,acx424akp
+ - sony,acx424akm
+ reg: true
+ reset-gpios: true
+ vddi-supply:
+ description: regulator that supplies the vddi voltage
+ enforce-video-mode: true
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi-controller@a0351000 {
+ compatible = "ste,mcde-dsi";
+ reg = <0xa0351000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sony,acx424akp";
+ reg = <0>;
+ vddi-supply = <&foo>;
+ reset-gpios = <&foo_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sony,acx565akm.yaml b/Bindings/display/panel/sony,acx565akm.yaml
new file mode 100644
index 0000000..98abdf4
--- /dev/null
+++ b/Bindings/display/panel/sony,acx565akm.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,acx565akm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony ACX565AKM SDI Panel
+
+maintainers:
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: sony,acx565akm
+
+ label: true
+ reset-gpios: true
+ port: true
+
+required:
+ - compatible
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@2 {
+ compatible = "sony,acx565akm";
+ spi-max-frequency = <6000000>;
+ reg = <2>;
+
+ label = "lcd";
+ reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&sdi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/sony,td4353-jdi.yaml b/Bindings/display/panel/sony,td4353-jdi.yaml
new file mode 100644
index 0000000..b6b885b
--- /dev/null
+++ b/Bindings/display/panel/sony,td4353-jdi.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,td4353-jdi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony TD4353 JDI 5 / 5.7" 2160x1080 MIPI-DSI Panel
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+ The Sony TD4353 JDI is a 5 (XZ2c) / 5.7 (XZ2) inch 2160x1080
+ MIPI-DSI panel, used in Xperia XZ2 and XZ2 Compact smartphones.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sony,td4353-jdi-tama
+
+ reg: true
+
+ backlight: true
+
+ vddio-supply:
+ description: VDDIO 1.8V supply
+
+ vsp-supply:
+ description: Positive 5.5V supply
+
+ vsn-supply:
+ description: Negative 5.5V supply
+
+ panel-reset-gpios:
+ description: Display panel reset pin
+
+ touch-reset-gpios:
+ description: Touch panel reset pin
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - vsp-supply
+ - vsn-supply
+ - panel-reset-gpios
+ - touch-reset-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: panel@0 {
+ compatible = "sony,td4353-jdi-tama";
+ reg = <0>;
+
+ backlight = <&pmi8998_wled>;
+ vddio-supply = <&vreg_l14a_1p8>;
+ vsp-supply = <&lab>;
+ vsn-supply = <&ibb>;
+ panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+ touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Bindings/display/panel/sony,tulip-truly-nt35521.yaml
new file mode 100644
index 0000000..9679729
--- /dev/null
+++ b/Bindings/display/panel/sony,tulip-truly-nt35521.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,tulip-truly-nt35521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony Tulip Truly NT35521 5.24" 1280x720 MIPI-DSI Panel
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+ The Sony Tulip Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel, which
+ can be found no Sony Xperia M4 phone. The panel backlight is managed
+ through DSI link.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sony,tulip-truly-nt35521
+
+ reg: true
+
+ positive5-supply:
+ description: Positive 5V supply
+
+ negative5-supply:
+ description: Negative 5V supply
+
+ reset-gpios: true
+
+ enable-gpios: true
+
+ port: true
+
+required:
+ - compatible
+ - reg
+ - positive5-supply
+ - negative5-supply
+ - reset-gpios
+ - enable-gpios
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "sony,tulip-truly-nt35521";
+ reg = <0>;
+ positive5-supply = <&positive5_reg>;
+ negative5-supply = <&negative5_reg>;
+ reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/panel/startek,kd070fhfid015.yaml b/Bindings/display/panel/startek,kd070fhfid015.yaml
new file mode 100644
index 0000000..d817f99
--- /dev/null
+++ b/Bindings/display/panel/startek,kd070fhfid015.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/startek,kd070fhfid015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Startek Electronic Technology Co. kd070fhfid015 7 inch TFT LCD panel
+
+maintainers:
+ - Alexandre Mergnat <amergnat@baylibre.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: startek,kd070fhfid015
+
+ enable-gpios: true
+
+ iovcc-supply:
+ description: Reference to the regulator powering the panel IO pins.
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ reset-gpios: true
+
+ port: true
+
+ power-supply: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - enable-gpios
+ - iovcc-supply
+ - reg
+ - reset-gpios
+ - port
+ - power-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "startek,kd070fhfid015";
+ reg = <0>;
+ enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+ iovcc-supply = <&mt6357_vsim1_reg>;
+ power-supply = <&vsys_lcm_reg>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/startek,startek-kd050c.yaml b/Bindings/display/panel/startek,startek-kd050c.yaml
new file mode 100644
index 0000000..fd66864
--- /dev/null
+++ b/Bindings/display/panel/startek,startek-kd050c.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/startek,startek-kd050c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel
+
+maintainers:
+ - Nikita Kiryanov <nikita@compulab.co.il>
+
+allOf:
+ - $ref: panel-dpi.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: startek,startek-kd050c
+ - {} # panel-dpi, but not listed here to avoid false select
+
+ backlight: true
+ enable-gpios: true
+ height-mm: true
+ label: true
+ panel-timing: true
+ port: true
+ power-supply: true
+ reset-gpios: true
+ width-mm: true
+
+additionalProperties: false
+
+...
diff --git a/Bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml b/Bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml
new file mode 100644
index 0000000..9e59944
--- /dev/null
+++ b/Bindings/display/panel/tfc,s9700rtwv43tr-01b.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/tfc,s9700rtwv43tr-01b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TFC S9700RTWV43TR-01B 7" Three Five Corp 800x480 LCD panel with resistive touch
+
+maintainers:
+ - Jyri Sarha <jsarha@ti.com>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+ The panel is found on TI AM335x-evm.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: tfc,s9700rtwv43tr-01b
+
+ enable-gpios: true
+ backlight: true
+ port: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+
+...
diff --git a/Bindings/display/panel/ti,nspire.yaml b/Bindings/display/panel/ti,nspire.yaml
new file mode 100644
index 0000000..5c5a3b5
--- /dev/null
+++ b/Bindings/display/panel/ti,nspire.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ti,nspire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments NSPIRE Display Panels
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,nspire-cx-lcd-panel
+ - ti,nspire-classic-lcd-panel
+ port: true
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ panel {
+ compatible = "ti,nspire-cx-lcd-panel";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&pads>;
+ };
+ };
+ };
diff --git a/Bindings/display/panel/tpo,td.yaml b/Bindings/display/panel/tpo,td.yaml
new file mode 100644
index 0000000..e8c8ee8
--- /dev/null
+++ b/Bindings/display/panel/tpo,td.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/tpo,td.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toppoly TD Panels
+
+maintainers:
+ - Marek Belisko <marek@goldelico.com>
+ - H. Nikolaus Schaller <hns@goldelico.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ # Toppoly TD028TTEC1 Panel
+ - tpo,td028ttec1
+ # Toppoly TD043MTEA1 Panel
+ - tpo,td043mtea1
+
+ reg: true
+ label: true
+ reset-gpios: true
+ backlight: true
+ port: true
+
+ spi-cpha: true
+ spi-cpol: true
+
+required:
+ - compatible
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: panel@0 {
+ compatible = "tpo,td043mtea1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+
+ reset-gpios = <&gpio7 7 0>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/tpo,tpg110.yaml b/Bindings/display/panel/tpo,tpg110.yaml
new file mode 100644
index 0000000..f0243d1
--- /dev/null
+++ b/Bindings/display/panel/tpo,tpg110.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/tpo,tpg110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPO TPG110 Panel
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+ - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+ This panel driver is a component that acts as an intermediary
+ between an RGB output and a variety of panels. The panel
+ driver is strapped up in electronics to the desired resolution
+ and other properties, and has a control interface over 3WIRE
+ SPI. By talking to the TPG110 over SPI, the strapped properties
+ can be discovered and the hardware is therefore mostly
+ self-describing.
+
+ +--------+
+ SPI -> | TPO | -> physical display
+ RGB -> | TPG110 |
+ +--------+
+
+ If some electrical strap or alternate resolution is desired,
+ this can be set up by taking software control of the display
+ over the SPI interface. The interface can also adjust
+ for properties of the display such as gamma correction and
+ certain electrical driving levels.
+
+ The TPG110 does not know the physical dimensions of the panel
+ connected, so this needs to be specified in the device tree.
+
+ It requires a GPIO line for control of its reset line.
+
+ The serial protocol has line names that resemble I2C but the
+ protocol is not I2C but 3WIRE SPI.
+
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ste,nomadik-nhk15-display
+ - const: tpo,tpg110
+ - const: tpo,tpg110
+
+ reg: true
+
+ grestb-gpios:
+ maxItems: 1
+ description: panel reset GPIO
+
+ spi-3wire: true
+
+ spi-max-frequency:
+ const: 3000000
+
+required:
+ - compatible
+ - reg
+ - grestb-gpios
+ - width-mm
+ - height-mm
+ - spi-3wire
+ - spi-max-frequency
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: display@0 {
+ compatible = "tpo,tpg110";
+ reg = <0>;
+ spi-3wire;
+ /* 320 ns min period ~= 3 MHz */
+ spi-max-frequency = <3000000>;
+ /* Width and height from data sheet */
+ width-mm = <116>;
+ height-mm = <87>;
+ grestb-gpios = <&foo_gpio 5 1>;
+ backlight = <&bl>;
+
+ port {
+ nomadik_clcd_panel: endpoint {
+ remote-endpoint = <&foo>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/panel/visionox,r66451.yaml b/Bindings/display/panel/visionox,r66451.yaml
new file mode 100644
index 0000000..6ba3236
--- /dev/null
+++ b/Bindings/display/panel/visionox,r66451.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox R66451 AMOLED DSI Panel
+
+maintainers:
+ - Jessica Zhang <quic_jesszhan@quicinc.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: visionox,r66451
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ vddio-supply: true
+ vdd-supply: true
+ port: true
+ reset-gpios: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - vdd-supply
+ - reset-gpios
+ - port
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "visionox,r66451";
+ reg = <0>;
+ vddio-supply = <&vreg_l12c_1p8>;
+ vdd-supply = <&vreg_l13c_3p0>;
+
+ reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/panel/visionox,rm69299.yaml b/Bindings/display/panel/visionox,rm69299.yaml
new file mode 100644
index 0000000..fa745a6
--- /dev/null
+++ b/Bindings/display/panel/visionox,rm69299.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox model RM69299 Panels
+
+maintainers:
+ - Harigovindan P <harigovi@codeaurora.org>
+
+description: |
+ This binding is for display panels using a Visionox RM692999 panel.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: visionox,rm69299-1080p-display
+
+ reg: true
+
+ vdda-supply:
+ description: |
+ Phandle of the regulator that provides the vdda supply voltage.
+
+ vdd3p3-supply:
+ description: |
+ Phandle of the regulator that provides the vdd3p3 supply voltage.
+
+ port: true
+ reset-gpios: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - vdda-supply
+ - vdd3p3-supply
+ - reset-gpios
+ - port
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "visionox,rm69299-1080p-display";
+ reg = <0>;
+
+ vdda-supply = <&src_pp1800_l8c>;
+ vdd3p3-supply = <&src_pp2800_l18a>;
+
+ reset-gpios = <&pm6150l_gpio 3 0>;
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/panel/visionox,vtdr6130.yaml b/Bindings/display/panel/visionox,vtdr6130.yaml
new file mode 100644
index 0000000..d5a8295
--- /dev/null
+++ b/Bindings/display/panel/visionox,vtdr6130.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,vtdr6130.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox VTDR6130 AMOLED DSI Panel
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: visionox,vtdr6130
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ vddio-supply: true
+ vci-supply: true
+ vdd-supply: true
+ port: true
+ reset-gpios: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - vddio-supply
+ - vci-supply
+ - vdd-supply
+ - reset-gpios
+ - port
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "visionox,vtdr6130";
+ reg = <0>;
+
+ vddio-supply = <&vreg_l12b_1p8>;
+ vci-supply = <&vreg_l13b_3p0>;
+ vdd-supply = <&vreg_l11b_1p2>;
+
+ reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+ port {
+ panel0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+...
diff --git a/Bindings/display/panel/xinpeng,xpp055c272.yaml b/Bindings/display/panel/xinpeng,xpp055c272.yaml
new file mode 100644
index 0000000..c407deb
--- /dev/null
+++ b/Bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/xinpeng,xpp055c272.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xinpeng XPP055C272 5.5in 720x1280 DSI panel
+
+maintainers:
+ - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: xinpeng,xpp055c272
+ reg: true
+ backlight: true
+ port: true
+ reset-gpios: true
+ iovcc-supply:
+ description: regulator that supplies the iovcc voltage
+ vci-supply:
+ description: regulator that supplies the vci voltage
+
+required:
+ - compatible
+ - reg
+ - backlight
+ - port
+ - iovcc-supply
+ - vci-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "xinpeng,xpp055c272";
+ reg = <0>;
+ backlight = <&backlight>;
+ iovcc-supply = <&vcc_1v8>;
+ vci-supply = <&vcc3v3_lcd>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/renesas,cmm.yaml b/Bindings/display/renesas,cmm.yaml
new file mode 100644
index 0000000..561efaa
--- /dev/null
+++ b/Bindings/display/renesas,cmm.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,cmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Color Management Module (CMM)
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
+ - Jacopo Mondi <jacopo+renesas@jmondi.org>
+
+description: |+
+ Renesas R-Car color management module connected to R-Car DU video channels.
+ It provides image enhancement functions such as 1-D look-up tables (LUT),
+ 3-D look-up tables (CLU), 1D-histogram generation (HGO), and color
+ space conversion (CSC).
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r8a7795-cmm
+ - renesas,r8a7796-cmm
+ - renesas,r8a77965-cmm
+ - renesas,r8a77990-cmm
+ - renesas,r8a77995-cmm
+ - const: renesas,rcar-gen3-cmm
+ - items:
+ - const: renesas,rcar-gen2-cmm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+ - power-domains
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7796-cpg-mssr.h>
+ #include <dt-bindings/power/r8a7796-sysc.h>
+
+ cmm0: cmm@fea40000 {
+ compatible = "renesas,r8a7796-cmm",
+ "renesas,rcar-gen3-cmm";
+ reg = <0xfea40000 0x1000>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ clocks = <&cpg CPG_MOD 711>;
+ resets = <&cpg 711>;
+ };
diff --git a/Bindings/display/renesas,du.yaml b/Bindings/display/renesas,du.yaml
new file mode 100644
index 0000000..c5b9e68
--- /dev/null
+++ b/Bindings/display/renesas,du.yaml
@@ -0,0 +1,867 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,du.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Display Unit (DU)
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+ These DT bindings describe the Display Unit embedded in the Renesas R-Car
+ Gen1, R-Car Gen2, R-Car Gen3, RZ/G1 and RZ/G2 SoCs.
+
+properties:
+ compatible:
+ enum:
+ - renesas,du-r8a7742 # for RZ/G1H compatible DU
+ - renesas,du-r8a7743 # for RZ/G1M compatible DU
+ - renesas,du-r8a7744 # for RZ/G1N compatible DU
+ - renesas,du-r8a7745 # for RZ/G1E compatible DU
+ - renesas,du-r8a77470 # for RZ/G1C compatible DU
+ - renesas,du-r8a774a1 # for RZ/G2M compatible DU
+ - renesas,du-r8a774b1 # for RZ/G2N compatible DU
+ - renesas,du-r8a774c0 # for RZ/G2E compatible DU
+ - renesas,du-r8a774e1 # for RZ/G2H compatible DU
+ - renesas,du-r8a7779 # for R-Car H1 compatible DU
+ - renesas,du-r8a7790 # for R-Car H2 compatible DU
+ - renesas,du-r8a7791 # for R-Car M2-W compatible DU
+ - renesas,du-r8a7792 # for R-Car V2H compatible DU
+ - renesas,du-r8a7793 # for R-Car M2-N compatible DU
+ - renesas,du-r8a7794 # for R-Car E2 compatible DU
+ - renesas,du-r8a7795 # for R-Car H3 compatible DU
+ - renesas,du-r8a7796 # for R-Car M3-W compatible DU
+ - renesas,du-r8a77961 # for R-Car M3-W+ compatible DU
+ - renesas,du-r8a77965 # for R-Car M3-N compatible DU
+ - renesas,du-r8a77970 # for R-Car V3M compatible DU
+ - renesas,du-r8a77980 # for R-Car V3H compatible DU
+ - renesas,du-r8a77990 # for R-Car E3 compatible DU
+ - renesas,du-r8a77995 # for R-Car D3 compatible DU
+ - renesas,du-r8a779a0 # for R-Car V3U compatible DU
+ - renesas,du-r8a779g0 # for R-Car V4H compatible DU
+
+ reg:
+ maxItems: 1
+
+ # See compatible-specific constraints below.
+ clocks: true
+ clock-names: true
+ interrupts:
+ description: Interrupt specifiers, one per DU channel
+ resets: true
+ reset-names: true
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ The connections to the DU output video ports are modeled using the OF
+ graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+ The number of ports and their assignment are model-dependent. Each port
+ shall have a single endpoint.
+
+ patternProperties:
+ "^port@[0-3]$":
+ $ref: /schemas/graph.yaml#/properties/port
+ unevaluatedProperties: false
+
+ required:
+ - port@0
+ - port@1
+
+ unevaluatedProperties: false
+
+ renesas,cmms:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description:
+ A list of phandles to the CMM instances present in the SoC, one for each
+ available DU channel.
+
+ renesas,vsps:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle to VSP instance that serves the DU channel
+ - description: Channel index identifying the LIF instance in that VSP
+ description:
+ A list of phandle and channel index tuples to the VSPs that handle the
+ memory interfaces for the DU channels.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+ - ports
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,du-r8a7779
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ items:
+ - description: Functional clock
+ - description: DU_DOTCLKIN0 input clock
+ - description: DU_DOTCLKIN1 input clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: du.0
+ - pattern: '^dclkin\.[01]$'
+ - pattern: '^dclkin\.[01]$'
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ ports:
+ properties:
+ port@0:
+ description: DPAD 0
+ port@1:
+ description: DPAD 1
+ # port@2 is TCON, not supported yet
+ port@2: false
+ port@3: false
+
+ required:
+ - port@0
+ - port@1
+
+ required:
+ - interrupts
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,du-r8a7743
+ - renesas,du-r8a7744
+ - renesas,du-r8a7791
+ - renesas,du-r8a7793
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ items:
+ - description: Functional clock for DU0
+ - description: Functional clock for DU1
+ - description: DU_DOTCLKIN0 input clock
+ - description: DU_DOTCLKIN1 input clock
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: du.0
+ - const: du.1
+ - pattern: '^dclkin\.[01]$'
+ - pattern: '^dclkin\.[01]$'
+
+ interrupts:
+ maxItems: 2
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: du.0
+
+ ports:
+ properties:
+ port@0:
+ description: DPAD 0
+ port@1:
+ description: LVDS 0
+ # port@2 is TCON, not supported yet
+ port@2: false
+ port@3: false
+
+ required:
+ - port@0
+ - port@1
+
+ required:
+ - clock-names
+ - interrupts
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,du-r8a7745
+ - renesas,du-r8a7792
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ items:
+ - description: Functional clock for DU0
+ - description: Functional clock for DU1
+ - description: DU_DOTCLKIN0 input clock
+ - description: DU_DOTCLKIN1 input clock
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: du.0
+ - const: du.1
+ - pattern: '^dclkin\.[01]$'
+ - pattern: '^dclkin\.[01]$'
+
+ interrupts:
+ maxItems: 2
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: du.0
+
+ ports:
+ properties:
+ port@0:
+ description: DPAD 0
+ port@1:
+ description: DPAD 1
+ port@2: false
+ port@3: false
+
+ required:
+ - port@0
+ - port@1
+
+ required:
+ - clock-names
+ - interrupts
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,du-r8a7794
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ items:
+ - description: Functional clock for DU0
+ - description: Functional clock for DU1
+ - description: DU_DOTCLKIN0 input clock
+ - description: DU_DOTCLKIN1 input clock
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: du.0
+ - const: du.1
+ - pattern: '^dclkin\.[01]$'
+ - pattern: '^dclkin\.[01]$'
+
+ interrupts:
+ maxItems: 2
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: du.0
+
+ ports:
+ properties:
+ port@0:
+ description: DPAD 0
+ port@1:
+ description: DPAD 1
+ # port@2 is TCON, not supported yet
+ port@2: false
+ port@3: false
+
+ required:
+ - port@0
+ - port@1
+
+ required:
+ - clock-names
+ - interrupts
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,du-r8a77470
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ items:
+ - description: Functional clock for DU0
+ - description: Functional clock for DU1
+ - description: DU_DOTCLKIN0 input clock
+ - description: DU_DOTCLKIN1 input clock
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: du.0
+ - const: du.1
+ - pattern: '^dclkin\.[01]$'
+ - pattern: '^dclkin\.[01]$'
+
+ interrupts:
+ maxItems: 2
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: du.0
+
+ ports:
+ properties:
+ port@0:
+ description: DPAD 0
+ port@1:
+ description: DPAD 1
+ port@2:
+ description: LVDS 0
+ # port@3 is DVENC, not supported yet
+ port@3: false
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+
+ required:
+ - clock-names
+ - interrupts
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,du-r8a7742
+ - renesas,du-r8a7790
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ items:
+ - description: Functional clock for DU0
+ - description: Functional clock for DU1
+ - description: Functional clock for DU2
+ - description: DU_DOTCLKIN0 input clock
+ - description: DU_DOTCLKIN1 input clock
+ - description: DU_DOTCLKIN2 input clock
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: du.0
+ - const: du.1
+ - const: du.2
+ - pattern: '^dclkin\.[012]$'
+ - pattern: '^dclkin\.[012]$'
+ - pattern: '^dclkin\.[012]$'
+
+ interrupts:
+ maxItems: 3
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: du.0
+
+ ports:
+ properties:
+ port@0:
+ description: DPAD 0
+ port@1:
+ description: LVDS 0
+ port@2:
+ description: LVDS 1
+ # port@3 is TCON, not supported yet
+ port@3: false
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+
+ required:
+ - clock-names
+ - interrupts
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,du-r8a7795
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ items:
+ - description: Functional clock for DU0
+ - description: Functional clock for DU1
+ - description: Functional clock for DU2
+ - description: Functional clock for DU4
+ - description: DU_DOTCLKIN0 input clock
+ - description: DU_DOTCLKIN1 input clock
+ - description: DU_DOTCLKIN2 input clock
+ - description: DU_DOTCLKIN3 input clock
+
+ clock-names:
+ minItems: 4
+ items:
+ - const: du.0
+ - const: du.1
+ - const: du.2
+ - const: du.3
+ - pattern: '^dclkin\.[0123]$'
+ - pattern: '^dclkin\.[0123]$'
+ - pattern: '^dclkin\.[0123]$'
+ - pattern: '^dclkin\.[0123]$'
+
+ interrupts:
+ maxItems: 4
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: du.0
+ - const: du.2
+
+ ports:
+ properties:
+ port@0:
+ description: DPAD 0
+ port@1:
+ description: HDMI 0
+ port@2:
+ description: HDMI 1
+ port@3:
+ description: LVDS 0
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+ - port@3
+
+ renesas,cmms:
+ minItems: 4
+
+ renesas,vsps:
+ minItems: 4
+
+ required:
+ - clock-names
+ - interrupts
+ - resets
+ - reset-names
+ - renesas,vsps
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,du-r8a774a1
+ - renesas,du-r8a7796
+ - renesas,du-r8a77961
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ items:
+ - description: Functional clock for DU0
+ - description: Functional clock for DU1
+ - description: Functional clock for DU2
+ - description: DU_DOTCLKIN0 input clock
+ - description: DU_DOTCLKIN1 input clock
+ - description: DU_DOTCLKIN2 input clock
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: du.0
+ - const: du.1
+ - const: du.2
+ - pattern: '^dclkin\.[012]$'
+ - pattern: '^dclkin\.[012]$'
+ - pattern: '^dclkin\.[012]$'
+
+ interrupts:
+ maxItems: 3
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: du.0
+ - const: du.2
+
+ ports:
+ properties:
+ port@0:
+ description: DPAD 0
+ port@1:
+ description: HDMI 0
+ port@2:
+ description: LVDS 0
+ port@3: false
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+
+ renesas,cmms:
+ minItems: 3
+
+ renesas,vsps:
+ minItems: 3
+
+ required:
+ - clock-names
+ - interrupts
+ - resets
+ - reset-names
+ - renesas,vsps
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,du-r8a774b1
+ - renesas,du-r8a774e1
+ - renesas,du-r8a77965
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ items:
+ - description: Functional clock for DU0
+ - description: Functional clock for DU1
+ - description: Functional clock for DU3
+ - description: DU_DOTCLKIN0 input clock
+ - description: DU_DOTCLKIN1 input clock
+ - description: DU_DOTCLKIN3 input clock
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: du.0
+ - const: du.1
+ - const: du.3
+ - pattern: '^dclkin\.[013]$'
+ - pattern: '^dclkin\.[013]$'
+ - pattern: '^dclkin\.[013]$'
+
+ interrupts:
+ maxItems: 3
+
+ resets:
+ maxItems: 2
+
+ reset-names:
+ items:
+ - const: du.0
+ - const: du.3
+
+ ports:
+ properties:
+ port@0:
+ description: DPAD 0
+ port@1:
+ description: HDMI 0
+ port@2:
+ description: LVDS 0
+ port@3: false
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+
+ renesas,cmms:
+ minItems: 3
+
+ renesas,vsps:
+ minItems: 3
+
+ required:
+ - clock-names
+ - interrupts
+ - resets
+ - reset-names
+ - renesas,vsps
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,du-r8a77970
+ - renesas,du-r8a77980
+ then:
+ properties:
+ clocks:
+ minItems: 1
+ items:
+ - description: Functional clock for DU0
+ - description: DU_DOTCLKIN0 input clock
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: du.0
+ - const: dclkin.0
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: du.0
+
+ ports:
+ properties:
+ port@0:
+ description: DPAD 0
+ port@1:
+ description: LVDS 0
+ port@2: false
+ port@3: false
+
+ required:
+ - port@0
+ - port@1
+
+ renesas,vsps:
+ minItems: 1
+
+ required:
+ - clock-names
+ - interrupts
+ - resets
+ - reset-names
+ - renesas,vsps
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,du-r8a774c0
+ - renesas,du-r8a77990
+ - renesas,du-r8a77995
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ items:
+ - description: Functional clock for DU0
+ - description: Functional clock for DU1
+ - description: DU_DOTCLKIN0 input clock
+ - description: DU_DOTCLKIN1 input clock
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: du.0
+ - const: du.1
+ - pattern: '^dclkin\.[01]$'
+ - pattern: '^dclkin\.[01]$'
+
+ interrupts:
+ maxItems: 2
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: du.0
+
+ ports:
+ properties:
+ port@0:
+ description: DPAD 0
+ port@1:
+ description: LVDS 0
+ port@2:
+ description: LVDS 1
+ # port@3 is TCON, not supported yet
+ port@3: false
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+
+ renesas,cmms:
+ minItems: 2
+
+ renesas,vsps:
+ minItems: 2
+
+ required:
+ - clock-names
+ - interrupts
+ - resets
+ - reset-names
+ - renesas,vsps
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,du-r8a779a0
+ - renesas,du-r8a779g0
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Functional clock
+
+ clock-names:
+ items:
+ - const: du.0
+
+ interrupts:
+ maxItems: 2
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: du.0
+
+ ports:
+ properties:
+ port@0:
+ description: DSI 0
+ port@1:
+ description: DSI 1
+ port@2: false
+ port@3: false
+
+ required:
+ - port@0
+ - port@1
+
+ renesas,vsps:
+ minItems: 2
+
+ required:
+ - clock-names
+ - interrupts
+ - resets
+ - reset-names
+ - renesas,vsps
+
+additionalProperties: false
+
+examples:
+ # R-Car H3 ES2.0 DU
+ - |
+ #include <dt-bindings/clock/renesas-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ display@feb00000 {
+ compatible = "renesas,du-r8a7795";
+ reg = <0xfeb00000 0x80000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&cpg CPG_MOD 721>;
+ clock-names = "du.0", "du.1", "du.2", "du.3";
+ resets = <&cpg 724>, <&cpg 722>;
+ reset-names = "du.0", "du.2";
+
+ renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
+ renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&dw_hdmi0_in>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&dw_hdmi1_in>;
+ };
+ };
+ port@3 {
+ reg = <3>;
+ endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/renesas,shmobile-lcdc.yaml b/Bindings/display/renesas,shmobile-lcdc.yaml
new file mode 100644
index 0000000..9816c4c
--- /dev/null
+++ b/Bindings/display/renesas,shmobile-lcdc.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,shmobile-lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SH-Mobile LCD Controller (LCDC)
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+ compatible:
+ enum:
+ - renesas,r8a7740-lcdc # R-Mobile A1
+ - renesas,sh73a0-lcdc # SH-Mobile AG5
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 5
+ description:
+ Only the functional clock is mandatory.
+ Some of the optional clocks are model-dependent (e.g. "video" (a.k.a.
+ "vou" or "dv_clk") is available on R-Mobile A1 only).
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: fck
+ - enum: [ media, lclk, hdmi, video ]
+ - enum: [ media, lclk, hdmi, video ]
+ - enum: [ media, lclk, hdmi, video ]
+ - enum: [ media, lclk, hdmi, video ]
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: LCD port (R-Mobile A1 and SH-Mobile AG5)
+ unevaluatedProperties: false
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: HDMI port (R-Mobile A1 LCDC1 and SH-Mobile AG5)
+ unevaluatedProperties: false
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: MIPI-DSI port (SH-Mobile AG5)
+ unevaluatedProperties: false
+
+ required:
+ - port@0
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - ports
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r8a7740-lcdc
+ then:
+ properties:
+ ports:
+ properties:
+ port@2: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,sh73a0-lcdc
+ then:
+ properties:
+ ports:
+ required:
+ - port@1
+ - port@2
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7740-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ lcd-controller@fe940000 {
+ compatible = "renesas,r8a7740-lcdc";
+ reg = <0xfe940000 0x4000>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_LCDC0>,
+ <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>,
+ <&vou_clk>;
+ clock-names = "fck", "media", "lclk", "video";
+ power-domains = <&pd_a4lc>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lcdc0_rgb: endpoint {
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/repaper.txt b/Bindings/display/repaper.txt
new file mode 100644
index 0000000..f5f9f9c
--- /dev/null
+++ b/Bindings/display/repaper.txt
@@ -0,0 +1,52 @@
+Pervasive Displays RePaper branded e-ink displays
+
+Required properties:
+- compatible: "pervasive,e1144cs021" for 1.44" display
+ "pervasive,e1190cs021" for 1.9" display
+ "pervasive,e2200cs021" for 2.0" display
+ "pervasive,e2271cs021" for 2.7" display
+
+- panel-on-gpios: Timing controller power control
+- discharge-gpios: Discharge control
+- reset-gpios: RESET pin
+- busy-gpios: BUSY pin
+
+Required property for e2271cs021:
+- border-gpios: Border control
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional property:
+- pervasive,thermal-zone: name of thermometer's thermal zone
+
+Example:
+
+ display_temp: lm75@48 {
+ compatible = "lm75b";
+ reg = <0x48>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ thermal-zones {
+ display {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&display_temp>;
+ };
+ };
+
+ papirus27@0{
+ compatible = "pervasive,e2271cs021";
+ reg = <0>;
+
+ spi-max-frequency = <8000000>;
+
+ panel-on-gpios = <&gpio 23 0>;
+ border-gpios = <&gpio 14 0>;
+ discharge-gpios = <&gpio 15 0>;
+ reset-gpios = <&gpio 24 0>;
+ busy-gpios = <&gpio 25 0>;
+
+ pervasive,thermal-zone = "display";
+ };
diff --git a/Bindings/display/rockchip/cdn-dp-rockchip.txt b/Bindings/display/rockchip/cdn-dp-rockchip.txt
new file mode 100644
index 0000000..8df7d2e
--- /dev/null
+++ b/Bindings/display/rockchip/cdn-dp-rockchip.txt
@@ -0,0 +1,74 @@
+Rockchip RK3399 specific extensions to the cdn Display Port
+================================
+
+Required properties:
+- compatible: must be "rockchip,rk3399-cdn-dp"
+
+- reg: physical base address of the controller and length
+
+- clocks: from common clock binding: handle to dp clock.
+
+- clock-names: from common clock binding:
+ Required elements: "core-clk" "pclk" "spdif" "grf"
+
+- resets : a list of phandle + reset specifier pairs
+- reset-names : string of reset names
+ Required elements: "apb", "core", "dptx", "spdif"
+- power-domains : power-domain property defined with a phandle
+ to respective power domain.
+- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE>
+- assigned-clock-rates : the DP core clk frequency, shall be: 100000000
+
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+
+- ports: contain a port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ contained 2 endpoints, connecting to the output of vop.
+
+- phys: from general PHY binding: the phandle for the PHY device.
+
+- extcon: extcon specifier for the Power Delivery
+
+- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF
+
+-------------------------------------------------------------------------------
+
+Example:
+ cdn_dp: dp@fec00000 {
+ compatible = "rockchip,rk3399-cdn-dp";
+ reg = <0x0 0xfec00000 0x0 0x100000>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
+ <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
+ clock-names = "core-clk", "pclk", "spdif", "grf";
+ assigned-clocks = <&cru SCLK_DP_CORE>;
+ assigned-clock-rates = <100000000>;
+ power-domains = <&power RK3399_PD_HDCP>;
+ phys = <&tcphy0_dp>, <&tcphy1_dp>;
+ resets = <&cru SRST_DPTX_SPDIF_REC>;
+ reset-names = "spdif";
+ extcon = <&fusb0>, <&fusb1>;
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dp_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_dp>;
+ };
+
+ dp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_dp>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/rockchip/inno_hdmi-rockchip.txt b/Bindings/display/rockchip/inno_hdmi-rockchip.txt
new file mode 100644
index 0000000..cec2171
--- /dev/null
+++ b/Bindings/display/rockchip/inno_hdmi-rockchip.txt
@@ -0,0 +1,49 @@
+Rockchip specific extensions to the Innosilicon HDMI
+================================
+
+Required properties:
+- compatible:
+ "rockchip,rk3036-inno-hdmi";
+- reg:
+ Physical base address and length of the controller's registers.
+- clocks, clock-names:
+ Phandle to hdmi controller clock, name should be "pclk"
+- interrupts:
+ HDMI interrupt number
+- ports:
+ Contain one port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/graph.txt.
+- pinctrl-0, pinctrl-name:
+ Switch the iomux of HPD/CEC pins to HDMI function.
+
+Example:
+hdmi: hdmi@20034000 {
+ compatible = "rockchip,rk3036-inno-hdmi";
+ reg = <0x20034000 0x4000>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI>;
+ clock-names = "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_ctl>;
+
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_lcdc: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&lcdc_out_hdmi>;
+ };
+ };
+};
+
+&pinctrl {
+ hdmi {
+ hdmi_ctl: hdmi-ctl {
+ rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>,
+ <1 9 RK_FUNC_1 &pcfg_pull_none>,
+ <1 10 RK_FUNC_1 &pcfg_pull_none>,
+ <1 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+};
diff --git a/Bindings/display/rockchip/rockchip,analogix-dp.yaml b/Bindings/display/rockchip/rockchip,analogix-dp.yaml
new file mode 100644
index 0000000..60dedf9
--- /dev/null
+++ b/Bindings/display/rockchip/rockchip,analogix-dp.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,analogix-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Analogix Display Port
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3288-dp
+ - rockchip,rk3399-edp
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: dp
+ - const: pclk
+ - const: grf
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: dp
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ This SoC makes use of GRF regs.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - rockchip,grf
+
+allOf:
+ - $ref: /schemas/display/bridge/analogix,dp.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ dp@ff970000 {
+ compatible = "rockchip,rk3288-dp";
+ reg = <0xff970000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+ clock-names = "dp", "pclk";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+ resets = <&cru 111>;
+ reset-names = "dp";
+ rockchip,grf = <&grf>;
+ pinctrl-0 = <&edp_hpd>;
+ pinctrl-names = "default";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_edp>;
+ };
+ edp_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_edp>;
+ };
+ };
+
+ edp_out: port@1 {
+ reg = <1>;
+
+ edp_out_panel: endpoint {
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
new file mode 100644
index 0000000..7e59dee
--- /dev/null
+++ b/Bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DWC HDMI TX Encoder
+
+maintainers:
+ - Mark Yao <markyao0591@gmail.com>
+
+description: |
+ The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+ with a companion PHY IP.
+
+allOf:
+ - $ref: ../bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3228-dw-hdmi
+ - rockchip,rk3288-dw-hdmi
+ - rockchip,rk3328-dw-hdmi
+ - rockchip,rk3399-dw-hdmi
+ - rockchip,rk3568-dw-hdmi
+
+ reg-io-width:
+ const: 4
+
+ avdd-0v9-supply:
+ description:
+ A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
+ varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
+ HDMI_AVDD_1V0.
+
+ avdd-1v8-supply:
+ description:
+ A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
+ SoC usually is HDMI_TX_AVDD_1V8.
+
+ clocks:
+ minItems: 2
+ items:
+ - {}
+ - {}
+ # The next three clocks are all optional, but shall be specified in this
+ # order when present.
+ - description: The HDMI CEC controller main clock
+ - description: Power for GRF IO
+ - description: External clock for some HDMI PHY (old clock name, deprecated)
+ - description: External clock for some HDMI PHY (new name)
+
+ clock-names:
+ minItems: 2
+ items:
+ - {}
+ - {}
+ - enum:
+ - cec
+ - grf
+ - vpll
+ - ref
+ - enum:
+ - grf
+ - vpll
+ - ref
+ - enum:
+ - vpll
+ - ref
+
+ ddc-i2c-bus:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The HDMI DDC bus can be connected to either a system I2C master or the
+ functionally-reduced I2C master contained in the DWC HDMI. When connected
+ to a system I2C master this property contains a phandle to that I2C
+ master controller.
+
+ phys:
+ maxItems: 1
+ description: The HDMI PHY
+
+ phy-names:
+ const: hdmi
+
+ pinctrl-names:
+ description:
+ The unwedge pinctrl entry shall drive the DDC SDA line low. This is
+ intended to work around a hardware errata that can cause the DDC I2C
+ bus to be wedged.
+ minItems: 1
+ items:
+ - const: default
+ - const: unwedge
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ patternProperties:
+ "^port(@0)?$":
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input of the DWC HDMI TX
+ properties:
+ endpoint:
+ description: Connection to the VOP
+ endpoint@0:
+ description: Connection to the VOPB
+ endpoint@1:
+ description: Connection to the VOPL
+ properties:
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Output of the DWC HDMI TX
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to the GRF to mux vopl/vopb.
+
+required:
+ - compatible
+ - reg
+ - reg-io-width
+ - clocks
+ - clock-names
+ - interrupts
+ - ports
+ - rockchip,grf
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ hdmi: hdmi@ff980000 {
+ compatible = "rockchip,rk3288-dw-hdmi";
+ reg = <0xff980000 0x20000>;
+ reg-io-width = <4>;
+ ddc-i2c-bus = <&i2c5>;
+ rockchip,grf = <&grf>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+ clock-names = "iahb", "isfr";
+
+ ports {
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_hdmi>;
+ };
+ hdmi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_hdmi>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
new file mode 100644
index 0000000..ccf79e7
--- /dev/null
+++ b/Bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - rockchip,px30-mipi-dsi
+ - rockchip,rk3288-mipi-dsi
+ - rockchip,rk3399-mipi-dsi
+ - rockchip,rk3568-mipi-dsi
+ - rockchip,rv1126-mipi-dsi
+ - const: snps,dw-mipi-dsi
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ oneOf:
+ - minItems: 2
+ items:
+ - const: ref
+ - const: pclk
+ - const: phy_cfg
+ - const: grf
+ - const: pclk
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ This SoC uses GRF regs to switch between vopl/vopb.
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: dphy
+
+ "#phy-cells":
+ const: 0
+ description:
+ Defined when in use as ISP phy.
+
+ power-domains:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - rockchip,grf
+
+allOf:
+ - $ref: /schemas/display/bridge/snps,dw-mipi-dsi.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,px30-mipi-dsi
+ - rockchip,rk3568-mipi-dsi
+ - rockchip,rv1126-mipi-dsi
+
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+
+ required:
+ - phys
+ - phy-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-mipi-dsi
+
+ then:
+ properties:
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3399-mipi-dsi
+
+ then:
+ properties:
+ clocks:
+ minItems: 4
+
+ clock-names:
+ minItems: 4
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ mipi_dsi: dsi@ff960000 {
+ compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
+ clock-names = "ref", "pclk";
+ resets = <&cru SRST_MIPIDSI0>;
+ reset-names = "apb";
+ rockchip,grf = <&grf>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+
+ mipi_out: port@1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&panel_in_mipi>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/rockchip/rockchip,lvds.yaml b/Bindings/display/rockchip/rockchip,lvds.yaml
new file mode 100644
index 0000000..03b002a
--- /dev/null
+++ b/Bindings/display/rockchip/rockchip,lvds.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip low-voltage differential signal (LVDS) transmitter
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30-lvds
+ - rockchip,rk3288-lvds
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: pclk_lvds
+
+ avdd1v0-supply:
+ description: 1.0V analog power.
+
+ avdd1v8-supply:
+ description: 1.8V analog power.
+
+ avdd3v3-supply:
+ description: 3.3V analog power.
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle to the general register files syscon.
+
+ rockchip,output:
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [rgb, lvds, duallvds]
+ description: This describes the output interface.
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: dphy
+
+ pinctrl-names:
+ const: lcdc
+
+ pinctrl-0: true
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port 0 for the VOP input.
+ The remote endpoint maybe vopb or vopl.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port 1 for either a panel or subsequent encoder.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - rockchip,grf
+ - rockchip,output
+ - ports
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,px30-lvds
+
+ then:
+ properties:
+ reg: false
+ clocks: false
+ clock-names: false
+ avdd1v0-supply: false
+ avdd1v8-supply: false
+ avdd3v3-supply: false
+
+ required:
+ - phys
+ - phy-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-lvds
+
+ then:
+ properties:
+ phys: false
+ phy-names: false
+
+ required:
+ - reg
+ - clocks
+ - clock-names
+ - avdd1v0-supply
+ - avdd1v8-supply
+ - avdd3v3-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+
+ lvds: lvds@ff96c000 {
+ compatible = "rockchip,rk3288-lvds";
+ reg = <0xff96c000 0x4000>;
+ clocks = <&cru PCLK_LVDS_PHY>;
+ clock-names = "pclk_lvds";
+ avdd1v0-supply = <&vdd10_lcd>;
+ avdd1v8-supply = <&vcc18_lcd>;
+ avdd3v3-supply = <&vcca_33>;
+ pinctrl-names = "lcdc";
+ pinctrl-0 = <&lcdc_ctl>;
+ rockchip,grf = <&grf>;
+ rockchip,output = "rgb";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lvds_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lvds_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_lvds>;
+ };
+ lvds_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_lvds>;
+ };
+ };
+
+ lvds_out: port@1 {
+ reg = <1>;
+
+ lvds_out_panel: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
new file mode 100644
index 0000000..1a68a94
--- /dev/null
+++ b/Bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3066-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3066 HDMI controller
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ const: rockchip,rk3066-hdmi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: hclk
+
+ power-domains:
+ maxItems: 1
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port node with two endpoints, numbered 0 and 1,
+ connected respectively to vop0 and vop1.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port node with one endpoint connected to a hdmi-connector node.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - pinctrl-0
+ - pinctrl-names
+ - power-domains
+ - rockchip,grf
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3066a-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
+ #include <dt-bindings/power/rk3066-power.h>
+ hdmi: hdmi@10116000 {
+ compatible = "rockchip,rk3066-hdmi";
+ reg = <0x10116000 0x2000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HDMI>;
+ clock-names = "hclk";
+ pinctrl-0 = <&hdmii2c_xfer>, <&hdmi_hpd>;
+ pinctrl-names = "default";
+ power-domains = <&power RK3066_PD_VIO>;
+ rockchip,grf = <&grf>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_vop0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vop0_out_hdmi>;
+ };
+ hdmi_in_vop1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vop1_out_hdmi>;
+ };
+ };
+ hdmi_out: port@1 {
+ reg = <1>;
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ hdmi {
+ hdmi_hpd: hdmi-hpd {
+ rockchip,pins = <0 RK_PA0 1 &pcfg_pull_default>;
+ };
+ hdmii2c_xfer: hdmii2c-xfer {
+ rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>,
+ <0 RK_PA2 1 &pcfg_pull_none>;
+ };
+ };
+ };
diff --git a/Bindings/display/rockchip/rockchip-drm.yaml b/Bindings/display/rockchip/rockchip-drm.yaml
new file mode 100644
index 0000000..a8d18a3
--- /dev/null
+++ b/Bindings/display/rockchip/rockchip-drm.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-drm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DRM master device
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ The Rockchip DRM master device is a virtual device needed to list all
+ vop devices or other display interface nodes that comprise the
+ graphics subsystem.
+
+properties:
+ compatible:
+ const: rockchip,display-subsystem
+
+ ports:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description: |
+ Should contain a list of phandles pointing to display interface port
+ of vop devices. vop definitions as defined in
+ Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+
+required:
+ - compatible
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vopl_out>, <&vopb_out>;
+ };
diff --git a/Bindings/display/rockchip/rockchip-vop.yaml b/Bindings/display/rockchip/rockchip-vop.yaml
new file mode 100644
index 0000000..b339b7e
--- /dev/null
+++ b/Bindings/display/rockchip/rockchip-vop.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP)
+
+description:
+ VOP (Video Output Processor) is the display controller for the Rockchip
+ series of SoCs which transfers the image data from a video memory
+ buffer to an external LCD interface.
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30-vop-big
+ - rockchip,px30-vop-lit
+ - rockchip,rk3036-vop
+ - rockchip,rk3066-vop
+ - rockchip,rk3126-vop
+ - rockchip,rk3188-vop
+ - rockchip,rk3228-vop
+ - rockchip,rk3288-vop
+ - rockchip,rk3328-vop
+ - rockchip,rk3366-vop
+ - rockchip,rk3368-vop
+ - rockchip,rk3399-vop-big
+ - rockchip,rk3399-vop-lit
+ - rockchip,rv1126-vop
+
+ reg:
+ minItems: 1
+ items:
+ - description:
+ Must contain one entry corresponding to the base address and length
+ of the register space.
+ - description:
+ Can optionally contain a second entry corresponding to
+ the CRTC gamma LUT address.
+
+ interrupts:
+ maxItems: 1
+ description:
+ The VOP interrupt is shared by several interrupt sources, such as
+ frame start (VSYNC), line flag and other status interrupts.
+
+ clocks:
+ items:
+ - description: Clock for ddr buffer transfer.
+ - description: Pixel clock.
+ - description: Clock for the ahb bus to R/W the phy regs.
+
+ clock-names:
+ items:
+ - const: aclk_vop
+ - const: dclk_vop
+ - const: hclk_vop
+
+ resets:
+ maxItems: 3
+
+ reset-names:
+ items:
+ - const: axi
+ - const: ahb
+ - const: dclk
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+
+ assigned-clocks:
+ maxItems: 2
+
+ assigned-clock-rates:
+ maxItems: 2
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/rk3288-power.h>
+ vopb: vopb@ff930000 {
+ compatible = "rockchip,rk3288-vop";
+ reg = <0xff930000 0x19c>,
+ <0xff931000 0x1000>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP0>,
+ <&cru DCLK_VOP0>,
+ <&cru HCLK_VOP0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
+ resets = <&cru SRST_LCDC1_AXI>,
+ <&cru SRST_LCDC1_AHB>,
+ <&cru SRST_LCDC1_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopb_mmu>;
+ vopb_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vopb_out_edp: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&edp_in_vopb>;
+ };
+ vopb_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_vopb>;
+ };
+ };
+ };
diff --git a/Bindings/display/rockchip/rockchip-vop2.yaml b/Bindings/display/rockchip/rockchip-vop2.yaml
new file mode 100644
index 0000000..b60b904
--- /dev/null
+++ b/Bindings/display/rockchip/rockchip-vop2.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP2)
+
+description:
+ VOP2 (Video Output Processor v2) is the display controller for the Rockchip
+ series of SoCs which transfers the image data from a video memory
+ buffer to an external LCD interface.
+
+maintainers:
+ - Sandy Huang <hjc@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,rk3566-vop
+ - rockchip,rk3568-vop
+
+ reg:
+ items:
+ - description:
+ Must contain one entry corresponding to the base address and length
+ of the register space.
+ - description:
+ Can optionally contain a second entry corresponding to
+ the CRTC gamma LUT address.
+
+ reg-names:
+ items:
+ - const: vop
+ - const: gamma-lut
+
+ interrupts:
+ maxItems: 1
+ description:
+ The VOP interrupt is shared by several interrupt sources, such as
+ frame start (VSYNC), line flag and other status interrupts.
+
+ clocks:
+ items:
+ - description: Clock for ddr buffer transfer.
+ - description: Clock for the ahb bus to R/W the phy regs.
+ - description: Pixel clock for video port 0.
+ - description: Pixel clock for video port 1.
+ - description: Pixel clock for video port 2.
+
+ clock-names:
+ items:
+ - const: aclk
+ - const: hclk
+ - const: dclk_vp0
+ - const: dclk_vp1
+ - const: dclk_vp2
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to GRF regs used for misc control
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output endpoint of VP0
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output endpoint of VP1
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Output endpoint of VP2
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3568-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/rk3568-power.h>
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ vop: vop@fe040000 {
+ compatible = "rockchip,rk3568-vop";
+ reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+ reg-names = "vop", "gamma-lut";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>,
+ <&cru HCLK_VOP>,
+ <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>,
+ <&cru DCLK_VOP2>;
+ clock-names = "aclk",
+ "hclk",
+ "dclk_vp0",
+ "dclk_vp1",
+ "dclk_vp2";
+ power-domains = <&power RK3568_PD_VO>;
+ iommus = <&vop_mmu>;
+ vop_out: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vp0: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ vp1: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ vp2: port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml b/Bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
new file mode 100644
index 0000000..458d399
--- /dev/null
+++ b/Bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI DDC
+
+maintainers:
+ - Inki Dae <inki.dae@samsung.com>
+ - Seung-Woo Kim <sw0312.kim@samsung.com>
+ - Kyungmin Park <kyungmin.park@samsung.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: samsung,exynos4210-hdmiddc
+ - const: samsung,exynos5-hdmiddc
+ deprecated: true
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+ };
diff --git a/Bindings/display/samsung/samsung,exynos-hdmi.yaml b/Bindings/display/samsung/samsung,exynos-hdmi.yaml
new file mode 100644
index 0000000..e4a68c5
--- /dev/null
+++ b/Bindings/display/samsung/samsung,exynos-hdmi.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI
+
+maintainers:
+ - Inki Dae <inki.dae@samsung.com>
+ - Seung-Woo Kim <sw0312.kim@samsung.com>
+ - Kyungmin Park <kyungmin.park@samsung.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynos4210-hdmi
+ - samsung,exynos4212-hdmi
+ - samsung,exynos5420-hdmi
+ - samsung,exynos5433-hdmi
+
+ clocks:
+ minItems: 5
+ maxItems: 10
+
+ clock-names:
+ minItems: 5
+ maxItems: 10
+
+ ddc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the HDMI DDC node.
+
+ hdmi-en-supply:
+ description:
+ Provides voltage source for DCC lines available on HDMI connector. When
+ there is no power provided for DDC epprom, some TV-sets do not pulls up
+ HPD (hot plug detect) line, what causes HDMI block to stay turned off.
+ When provided, the regulator allows TV-set correctly signal HPD event.
+
+ hpd-gpios:
+ maxItems: 1
+ description:
+ A GPIO line connected to HPD
+
+ interrupts:
+ maxItems: 1
+
+ phy:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Phandle to the HDMI PHY node.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Contains a port which is connected to mic node.
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ samsung,syscon-phandle:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the PMU system controller node.
+
+ samsung,sysreg-phandle:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to DISP system controller interface.
+
+ '#sound-dai-cells':
+ const: 0
+
+ vdd-supply:
+ description:
+ VDD 1.0V HDMI TX.
+
+ vdd_osc-supply:
+ description:
+ VDD 1.8V HDMI OSC.
+
+ vdd_pll-supply:
+ description:
+ VDD 1.0V HDMI PLL.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - ddc
+ - hpd-gpios
+ - interrupts
+ - phy
+ - reg
+ - samsung,syscon-phandle
+ - '#sound-dai-cells'
+ - vdd-supply
+ - vdd_osc-supply
+ - vdd_pll-supply
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos5433-hdmi
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Gate of HDMI IP APB bus.
+ - description: Gate of HDMI-PHY IP APB bus.
+ - description: Gate of HDMI TMDS clock.
+ - description: Gate of HDMI pixel clock.
+ - description: TMDS clock generated by HDMI-PHY.
+ - description: MUX used to switch between oscclk and tmds_clko,
+ respectively if HDMI-PHY is off and operational.
+ - description: Pixel clock generated by HDMI-PHY.
+ - description: MUX used to switch between oscclk and pixel_clko,
+ respectively if HDMI-PHY is off and operational.
+ - description: Oscillator clock, used as parent of following *_user
+ clocks in case HDMI-PHY is not operational.
+ - description: Gate of HDMI SPDIF clock.
+ clock-names:
+ items:
+ - const: hdmi_pclk
+ - const: hdmi_i_pclk
+ - const: i_tmds_clk
+ - const: i_pixel_clk
+ - const: tmds_clko
+ - const: tmds_clko_user
+ - const: pixel_clko
+ - const: pixel_clko_user
+ - const: oscclk
+ - const: i_spdif_clk
+ required:
+ - samsung,sysreg-phandle
+ else:
+ properties:
+ clocks:
+ items:
+ - description: Gate of HDMI IP bus clock.
+ - description: Gate of HDMI special clock.
+ - description: Pixel special clock, one of the two possible inputs
+ of HDMI clock mux.
+ - description: HDMI PHY clock output, one of two possible inputs of
+ HDMI clock mux.
+ - description: It is required by the driver to switch between the 2
+ parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+ after configuration, parent is set to sclk_hdmiphy else
+ sclk_pixel.
+ clock-names:
+ items:
+ - const: hdmi
+ - const: sclk_hdmi
+ - const: sclk_pixel
+ - const: sclk_hdmiphy
+ - const: mout_hdmi
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos5433.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ hdmi@13970000 {
+ compatible = "samsung,exynos5433-hdmi";
+ reg = <0x13970000 0x70000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_disp CLK_PCLK_HDMI>,
+ <&cmu_disp CLK_PCLK_HDMIPHY>,
+ <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
+ <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
+ <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
+ <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
+ <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
+ <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
+ <&xxti>,
+ <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
+ clock-names = "hdmi_pclk",
+ "hdmi_i_pclk",
+ "i_tmds_clk",
+ "i_pixel_clk",
+ "tmds_clko",
+ "tmds_clko_user",
+ "pixel_clko",
+ "pixel_clko_user",
+ "oscclk",
+ "i_spdif_clk";
+ phy = <&hdmiphy>;
+ ddc = <&hsi2c_11>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,sysreg-phandle = <&syscon_disp>;
+ #sound-dai-cells = <0>;
+
+ hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&ldo6_reg>;
+ vdd_osc-supply = <&ldo7_reg>;
+ vdd_pll-supply = <&ldo6_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ hdmi_to_tv: endpoint {
+ remote-endpoint = <&tv_to_hdmi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi_to_mhl: endpoint {
+ remote-endpoint = <&mhl_to_hdmi>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/samsung/samsung,exynos-mixer.yaml b/Bindings/display/samsung/samsung,exynos-mixer.yaml
new file mode 100644
index 0000000..25d53fd
--- /dev/null
+++ b/Bindings/display/samsung/samsung,exynos-mixer.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Mixer
+
+maintainers:
+ - Inki Dae <inki.dae@samsung.com>
+ - Seung-Woo Kim <sw0312.kim@samsung.com>
+ - Kyungmin Park <kyungmin.park@samsung.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+ Samsung Exynos SoC Mixer is responsible for mixing and blending multiple data
+ inputs before passing it to an output device. The output is passed to HDMI.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - samsung,exynos4210-mixer
+ - samsung,exynos4212-mixer
+ - samsung,exynos5250-mixer
+ - samsung,exynos5420-mixer
+ - const: samsung,exynos5-mixer
+ deprecated: true
+
+ clocks:
+ minItems: 3
+ items:
+ - description: Gate of Mixer IP bus clock.
+ - description: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
+ - description: HDMI Special clock, one of the two possible inputs of
+ mixer mux.
+ - description: Video Processor clock.
+ - description: Mixer mux clock.
+ - description: Mixer Special clock.
+
+ clock-names:
+ minItems: 3
+ items:
+ - const: mixer
+ - const: hdmi
+ - const: sclk_hdmi
+ - const: vp
+ - const: mout_mixer
+ - const: sclk_mixer
+
+ interconnects:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ minItems: 1
+ items:
+ - description: Mixer memory region.
+ - description: Video Processor memory region.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - interrupts
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos4210-mixer
+ - samsung,exynos4212-mixer
+ then:
+ properties:
+ clocks:
+ minItems: 6
+ maxItems: 6
+ regs:
+ minItems: 2
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos4212-mixer
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ maxItems: 4
+ regs:
+ minItems: 2
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynos5-mixer
+ - samsung,exynos5250-mixer
+ - samsung,exynos5420-mixer
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ regs:
+ minItems: 1
+ maxItems: 1
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos5250.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mixer@14450000 {
+ compatible = "samsung,exynos5250-mixer";
+ reg = <0x14450000 0x10000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_MIXER>,
+ <&clock CLK_HDMI>,
+ <&clock CLK_SCLK_HDMI>;
+ clock-names = "mixer",
+ "hdmi",
+ "sclk_hdmi";
+ iommus = <&sysmmu_tv>;
+ power-domains = <&pd_disp1>;
+ };
diff --git a/Bindings/display/samsung/samsung,exynos5433-decon.yaml b/Bindings/display/samsung/samsung,exynos5433-decon.yaml
new file mode 100644
index 0000000..6380eee
--- /dev/null
+++ b/Bindings/display/samsung/samsung,exynos5433-decon.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+ - Inki Dae <inki.dae@samsung.com>
+ - Seung-Woo Kim <sw0312.kim@samsung.com>
+ - Kyungmin Park <kyungmin.park@samsung.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ DECON (Display and Enhancement Controller) is the Display Controller for the
+ Exynos5433 series of SoCs which transfers the image data from a video memory
+ buffer to an external LCD interface.
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynos5433-decon
+ - samsung,exynos5433-decon-tv
+
+ clocks:
+ maxItems: 11
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: aclk_decon
+ - const: aclk_smmu_decon0x
+ - const: aclk_xiu_decon0x
+ - const: pclk_smmu_decon0x
+ - const: aclk_smmu_decon1x
+ - const: aclk_xiu_decon1x
+ - const: pclk_smmu_decon1x
+ - const: sclk_decon_vclk
+ - const: sclk_decon_eclk
+ - const: dsd
+
+ interrupts:
+ minItems: 3
+ maxItems: 4
+ description: |
+ Interrupts depend on mode of work:
+ - video mode: vsync
+ - command mode: lcd_sys
+ - command mode with software trigger: lcd_sys, te
+
+ interrupt-names:
+ minItems: 3
+ items:
+ - const: fifo
+ - const: vsync
+ - const: lcd_sys
+ - const: te
+
+ iommus:
+ maxItems: 2
+
+ iommu-names:
+ items:
+ - const: m0
+ - const: m1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Contains a port which is connected to mic node.
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ samsung,disp-sysreg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to DISP system controller interface.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - ports
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos5433.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ display-controller@13800000 {
+ compatible = "samsung,exynos5433-decon";
+ reg = <0x13800000 0x2104>;
+ clocks = <&cmu_disp CLK_PCLK_DECON>,
+ <&cmu_disp CLK_ACLK_DECON>,
+ <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_ACLK_XIU_DECON0X>,
+ <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+ <&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+ <&cmu_disp CLK_ACLK_XIU_DECON1X>,
+ <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+ <&cmu_disp CLK_SCLK_DECON_VCLK>,
+ <&cmu_disp CLK_SCLK_DECON_ECLK>,
+ <&cmu_disp CLK_SCLK_DSD>;
+ clock-names = "pclk",
+ "aclk_decon",
+ "aclk_smmu_decon0x",
+ "aclk_xiu_decon0x",
+ "pclk_smmu_decon0x",
+ "aclk_smmu_decon1x",
+ "aclk_xiu_decon1x",
+ "pclk_smmu_decon1x",
+ "sclk_decon_vclk",
+ "sclk_decon_eclk",
+ "dsd";
+ power-domains = <&pd_disp>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+ samsung,disp-sysreg = <&syscon_disp>;
+ iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+ iommu-names = "m0", "m1";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ decon_to_mic: endpoint {
+ remote-endpoint = <&mic_to_decon>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/samsung/samsung,exynos5433-mic.yaml b/Bindings/display/samsung/samsung,exynos5433-mic.yaml
new file mode 100644
index 0000000..26e5017
--- /dev/null
+++ b/Bindings/display/samsung/samsung,exynos5433-mic.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-mic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Mobile Image Compressor (MIC)
+
+maintainers:
+ - Inki Dae <inki.dae@samsung.com>
+ - Seung-Woo Kim <sw0312.kim@samsung.com>
+ - Kyungmin Park <kyungmin.park@samsung.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ MIC (Mobile Image Compressor) resides between DECON and MIPI DSI. MIPI DSI is
+ not capable of transferring high resoltuion frame data as DECON can send. MIC
+ solves this problem by compressing the frame data by 1/2 before it is
+ transferred through MIPI DSI. The compressed frame data must be uncompressed
+ in the panel PCB.
+
+properties:
+ compatible:
+ const: samsung,exynos5433-mic
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: pclk_mic0
+ - const: sclk_rgb_vclk_to_mic0
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Contains a port which is connected to mic node.
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ samsung,disp-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to DISP system controller interface.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - ports
+ - reg
+ - samsung,disp-syscon
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos5433.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ image-processor@13930000 {
+ compatible = "samsung,exynos5433-mic";
+ reg = <0x13930000 0x48>;
+ clocks = <&cmu_disp CLK_PCLK_MIC0>,
+ <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+ clock-names = "pclk_mic0",
+ "sclk_rgb_vclk_to_mic0";
+ power-domains = <&pd_disp>;
+ samsung,disp-syscon = <&syscon_disp>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mic_to_decon: endpoint {
+ remote-endpoint = <&decon_to_mic>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mic_to_dsi: endpoint {
+ remote-endpoint = <&dsi_to_mic>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/samsung/samsung,exynos7-decon.yaml b/Bindings/display/samsung/samsung,exynos7-decon.yaml
new file mode 100644
index 0000000..992c23c
--- /dev/null
+++ b/Bindings/display/samsung/samsung,exynos7-decon.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos7-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+ - Inki Dae <inki.dae@samsung.com>
+ - Seung-Woo Kim <sw0312.kim@samsung.com>
+ - Kyungmin Park <kyungmin.park@samsung.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ DECON (Display and Enhancement Controller) is the Display Controller for the
+ Exynos7 series of SoCs which transfers the image data from a video memory
+ buffer to an external LCD interface.
+
+properties:
+ compatible:
+ const: samsung,exynos7-decon
+
+ clocks:
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: pclk_decon0
+ - const: aclk_decon0
+ - const: decon0_eclk
+ - const: decon0_vclk
+
+ display-timings:
+ $ref: ../panel/display-timings.yaml#
+
+ i80-if-timings:
+ type: object
+ additionalProperties: false
+ description: timing configuration for lcd i80 interface support
+ properties:
+ cs-setup:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Clock cycles for the active period of address signal is enabled until
+ chip select is enabled.
+ default: 0
+
+ wr-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Clock cycles for the active period of CS is enabled.
+ default: 1
+
+ wr-hold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Clock cycles for the active period of CS is disabled until write
+ signal is disabled.
+ default: 0
+
+ wr-setup:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Clock cycles for the active period of CS signal is enabled until
+ write signal is enabled.
+ default: 0
+
+ interrupts:
+ items:
+ - description: FIFO level
+ - description: VSYNC
+ - description: LCD system
+
+ interrupt-names:
+ items:
+ - const: fifo
+ - const: vsync
+ - const: lcd_sys
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos7-clk.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ display-controller@13930000 {
+ compatible = "samsung,exynos7-decon";
+ reg = <0x13930000 0x1000>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock_disp 100>, /* PCLK_DECON_INT */
+ <&clock_disp 101>, /* ACLK_DECON_INT */
+ <&clock_disp 102>, /* SCLK_DECON_INT_ECLK */
+ <&clock_disp 103>; /* SCLK_DECON_INT_EXTCLKPLL */
+ clock-names = "pclk_decon0",
+ "aclk_decon0",
+ "decon0_eclk",
+ "decon0_vclk";
+ pinctrl-0 = <&lcd_clk &pwm1_out>;
+ pinctrl-names = "default";
+ };
diff --git a/Bindings/display/samsung/samsung,fimd.yaml b/Bindings/display/samsung/samsung,fimd.yaml
new file mode 100644
index 0000000..0752317
--- /dev/null
+++ b/Bindings/display/samsung/samsung,fimd.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,fimd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC Fully Interactive Mobile Display (FIMD)
+
+maintainers:
+ - Inki Dae <inki.dae@samsung.com>
+ - Seung-Woo Kim <sw0312.kim@samsung.com>
+ - Kyungmin Park <kyungmin.park@samsung.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - samsung,s3c2443-fimd
+ - samsung,s3c6400-fimd
+ - samsung,s5pv210-fimd
+ - samsung,exynos3250-fimd
+ - samsung,exynos4210-fimd
+ - samsung,exynos5250-fimd
+ - samsung,exynos5420-fimd
+
+ '#address-cells':
+ const: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: sclk_fimd
+ - const: fimd
+
+ display-timings:
+ $ref: ../panel/display-timings.yaml#
+
+ i80-if-timings:
+ type: object
+ additionalProperties: false
+ description: |
+ Timing configuration for lcd i80 interface support.
+ The parameters are defined as::
+ VCLK(internal) __|??????|_____|??????|_____|??????|_____|??????|_____|??
+ : : : : :
+ Address Output --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
+ | cs-setup+1 | : : :
+ |<---------->| : : :
+ Chip Select ???????????????|____________:____________:____________|??
+ | wr-setup+1 | | wr-hold+1 |
+ |<---------->| |<---------->|
+ Write Enable ????????????????????????????|____________|???????????????
+ | wr-active+1|
+ |<---------->|
+ Video Data ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
+
+ properties:
+ cs-setup:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Clock cycles for the active period of address signal is enabled until
+ chip select is enabled.
+ default: 0
+
+ wr-active:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Clock cycles for the active period of CS is enabled.
+ default: 1
+
+ wr-hold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Clock cycles for the active period of CS is disabled until write
+ signal is disabled.
+ default: 0
+
+ wr-setup:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Clock cycles for the active period of CS signal is enabled until
+ write signal is enabled.
+ default: 0
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ iommu-names:
+ items:
+ - const: m0
+ - const: m1
+
+ interrupts:
+ items:
+ - description: FIFO level
+ - description: VSYNC
+ - description: LCD system
+
+ interrupt-names:
+ items:
+ - const: fifo
+ - const: vsync
+ - const: lcd_sys
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ samsung,invert-vden:
+ type: boolean
+ description:
+ Video enable signal is inverted.
+
+ samsung,invert-vclk:
+ type: boolean
+ description:
+ Video clock signal is inverted.
+
+ samsung,sysreg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to System Register syscon.
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "^port@[0-4]+$":
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Contains ports with port with index::
+ 0 - for CAMIF0 input,
+ 1 - for CAMIF1 input,
+ 2 - for CAMIF2 input,
+ 3 - for parallel output,
+ 4 - for write-back interface
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - reg
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos5420-fimd
+ then:
+ properties:
+ iommus:
+ minItems: 2
+ maxItems: 2
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos4.h>
+
+ fimd@11c00000 {
+ compatible = "samsung,exynos4210-fimd";
+ interrupt-parent = <&combiner>;
+ reg = <0x11c00000 0x20000>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <11 0>, <11 1>, <11 2>;
+ clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
+ clock-names = "sclk_fimd", "fimd";
+ power-domains = <&pd_lcd0>;
+ iommus = <&sysmmu_fimd0>;
+ samsung,sysreg = <&sys_reg>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ samsung,invert-vden;
+ samsung,invert-vclk;
+
+ pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+ pinctrl-names = "default";
+
+ port@3 {
+ reg = <3>;
+
+ fimd_dpi_ep: endpoint {
+ remote-endpoint = <&lcd_ep>;
+ };
+ };
+ };
diff --git a/Bindings/display/simple-framebuffer.yaml b/Bindings/display/simple-framebuffer.yaml
new file mode 100644
index 0000000..296500f
--- /dev/null
+++ b/Bindings/display/simple-framebuffer.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/simple-framebuffer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Framebuffer
+
+maintainers:
+ - Hans de Goede <hdegoede@redhat.com>
+
+description: |+
+ A simple frame-buffer describes a frame-buffer setup by firmware or
+ the bootloader, with the assumption that the display hardware has
+ already been set up to scan out from the memory pointed to by the
+ reg property.
+
+ Since simplefb nodes represent runtime information they must be
+ sub-nodes of the chosen node (*). Simplefb nodes must be named
+ framebuffer@<address>.
+
+ If the devicetree contains nodes for the display hardware used by a
+ simplefb, then the simplefb node must contain a property called
+ display, which contains a phandle pointing to the primary display
+ hw node, so that the OS knows which simplefb to disable when handing
+ over control to a driver for the real hardware. The bindings for the
+ hw nodes must specify which node is considered the primary node.
+
+ If a panel node is given, then the driver uses this to configure the
+ physical width and height of the display. If no panel node is given,
+ then the driver uses the width and height properties of the simplefb
+ node to estimate it.
+
+ It is advised to add display# aliases to help the OS determine how
+ to number things. If display# aliases are used, then if the simplefb
+ node contains a display property then the /aliases/display# path
+ must point to the display hw node the display property points to,
+ otherwise it must point directly to the simplefb node.
+
+ If a simplefb node represents the preferred console for user
+ interaction, then the chosen node stdout-path property should point
+ to it, or to the primary display hw node, as with display#
+ aliases. If display aliases are used then it should be set to the
+ alias instead.
+
+ It is advised that devicetree files contain pre-filled, disabled
+ framebuffer nodes, so that the firmware only needs to update the
+ mode information and enable them. This way if e.g. later on support
+ for more display clocks get added, the simplefb nodes will already
+ contain this info and the firmware does not need to be updated.
+
+ If pre-filled framebuffer nodes are used, the firmware may need
+ extra information to find the right node. In that case an extra
+ platform specific compatible and platform specific properties should
+ be used and documented.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - apple,simple-framebuffer
+ - allwinner,simple-framebuffer
+ - amlogic,simple-framebuffer
+ - const: simple-framebuffer
+ - const: simple-framebuffer
+
+ reg:
+ description: Location and size of the framebuffer memory
+
+ memory-region:
+ maxItems: 1
+ description: Phandle to a node describing the memory to be used for the
+ framebuffer. If present, overrides the "reg" property (if one exists).
+
+ clocks:
+ description: List of clocks used by the framebuffer.
+
+ power-domains:
+ description: List of power domains used by the framebuffer.
+
+ width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Width of the framebuffer in pixels
+
+ height:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Height of the framebuffer in pixels
+
+ stride:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Number of bytes of a line in the framebuffer
+
+ format:
+ description: >
+ Format of the framebuffer:
+ * `a1r5g5b5` - 16-bit pixels, d[15]=a, d[14:10]=r, d[9:5]=g, d[4:0]=b
+ * `a2r10g10b10` - 32-bit pixels, d[31:30]=a, d[29:20]=r, d[19:10]=g, d[9:0]=b
+ * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r
+ * `a8r8g8b8` - 32-bit pixels, d[31:24]=a, d[23:16]=r, d[15:8]=g, d[7:0]=b
+ * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b
+ * `r5g5b5a1` - 16-bit pixels, d[15:11]=r, d[10:6]=g, d[5:1]=b d[1:0]=a
+ * `r8g8b8` - 24-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
+ * `x1r5g5b5` - 16-bit pixels, d[14:10]=r, d[9:5]=g, d[4:0]=b
+ * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b
+ * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
+ * `x8b8g8r8` - 32-bit pixels, d[23:16]=b, d[15:8]=g, d[7:0]=r
+ enum:
+ - a1r5g5b5
+ - a2r10g10b10
+ - a8b8g8r8
+ - a8r8g8b8
+ - r5g6b5
+ - r5g5b5a1
+ - r8g8b8
+ - x1r5g5b5
+ - x2r10g10b10
+ - x8r8g8b8
+ - x8b8g8r8
+
+ display:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Primary display hardware node
+
+ panel:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Display panel node
+
+ allwinner,pipeline:
+ description: Pipeline used by the framebuffer on Allwinner SoCs
+ enum:
+ - de_be0-lcd0
+ - de_be0-lcd0-hdmi
+ - de_be0-lcd0-tve0
+ - de_be1-lcd0
+ - de_be1-lcd1-hdmi
+ - de_fe0-de_be0-lcd0
+ - de_fe0-de_be0-lcd0-hdmi
+ - de_fe0-de_be0-lcd0-tve0
+ - mixer0-lcd0
+ - mixer0-lcd0-hdmi
+ - mixer1-lcd1-hdmi
+ - mixer1-lcd1-tve
+
+ amlogic,pipeline:
+ description: Pipeline used by the framebuffer on Amlogic SoCs
+ enum:
+ - vpu-cvbs
+ - vpu-hdmi
+
+patternProperties:
+ "^[a-zA-Z0-9-]+-supply$":
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Regulators used by the framebuffer. These should be named
+ according to the names in the device design.
+
+required:
+ # The binding requires also reg, width, height, stride and format,
+ # but usually they will be filled by the bootloader.
+ - compatible
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,simple-framebuffer
+
+ then:
+ required:
+ - allwinner,pipeline
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: amlogic,simple-framebuffer
+
+ then:
+ required:
+ - amlogic,pipeline
+
+
+additionalProperties: false
+
+examples:
+ - |
+ / {
+ compatible = "foo";
+ model = "foo";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ framebuffer0: framebuffer@1d385000 {
+ compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ reg = <0x1d385000 3840000>;
+ width = <1600>;
+ height = <1200>;
+ stride = <3200>;
+ format = "r5g6b5";
+ clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
+ lcd-supply = <®_dc1sw>;
+ display = <&lcdc0>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/sitronix,st7586.txt b/Bindings/display/sitronix,st7586.txt
new file mode 100644
index 0000000..1d0dad1
--- /dev/null
+++ b/Bindings/display/sitronix,st7586.txt
@@ -0,0 +1,22 @@
+Sitronix ST7586 display panel
+
+Required properties:
+- compatible: "lego,ev3-lcd".
+- a0-gpios: The A0 signal (since this binding is for serial mode, this is
+ the pin labeled D1 on the controller, not the pin labeled A0)
+- reset-gpios: Reset pin
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in ../spi/spi-bus.txt must be specified.
+
+Optional properties:
+- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
+
+Example:
+ display@0{
+ compatible = "lego,ev3-lcd";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Bindings/display/sitronix,st7735r.yaml b/Bindings/display/sitronix,st7735r.yaml
new file mode 100644
index 0000000..3b0ebc0
--- /dev/null
+++ b/Bindings/display/sitronix,st7735r.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7735R Display Panels
+
+maintainers:
+ - David Lechner <david@lechnology.com>
+
+description:
+ This binding is for display panels using a Sitronix ST7715R or ST7735R
+ controller in SPI mode.
+
+allOf:
+ - $ref: panel/panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - description:
+ Adafruit 1.8" 160x128 Color TFT LCD (Product ID 358 or 618)
+ items:
+ - enum:
+ - jianda,jd-t18003-t01
+ - const: sitronix,st7735r
+ - description:
+ Okaya 1.44" 128x128 Color TFT LCD (E.g. Renesas YRSK-LCD-PMOD)
+ items:
+ - enum:
+ - okaya,rh128128t
+ - const: sitronix,st7715r
+
+ dc-gpios:
+ maxItems: 1
+ description: Display data/command selection (D/CX)
+
+ backlight: true
+ reg: true
+ spi-max-frequency: true
+ reset-gpios: true
+ rotation: true
+
+required:
+ - compatible
+ - reg
+ - dc-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ display@0{
+ compatible = "jianda,jd-t18003-t01", "sitronix,st7735r";
+ reg = <0>;
+ spi-max-frequency = <32000000>;
+ dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+ rotation = <270>;
+ backlight = <&backlight>;
+ };
+ };
+
+...
diff --git a/Bindings/display/sm501fb.txt b/Bindings/display/sm501fb.txt
new file mode 100644
index 0000000..1c79c26
--- /dev/null
+++ b/Bindings/display/sm501fb.txt
@@ -0,0 +1,32 @@
+* SM SM501
+
+The SM SM501 is a LCD controller, with proper hardware, it can also
+drive DVI monitors.
+
+Required properties:
+- compatible : should be "smi,sm501".
+- reg : contain two entries:
+ - First entry: System Configuration register
+ - Second entry: IO space (Display Controller register)
+- interrupts : SMI interrupt to the cpu should be described here.
+
+Optional properties:
+- mode : select a video mode:
+ <xres>x<yres>[-<bpp>][@<refresh>]
+- edid : verbatim EDID data block describing attached display.
+ Data from the detailed timing descriptor will be used to
+ program the display controller.
+- little-endian: available on big endian systems, to
+ set different foreign endian.
+- big-endian: available on little endian systems, to
+ set different foreign endian.
+
+Example for MPC5200:
+ display@1,0 {
+ compatible = "smi,sm501";
+ reg = <1 0x00000000 0x00800000
+ 1 0x03e00000 0x00200000>;
+ interrupts = <1 1 3>;
+ mode = "640x480-32@60";
+ edid = [edid-data];
+ };
diff --git a/Bindings/display/snps,arcpgu.txt b/Bindings/display/snps,arcpgu.txt
new file mode 100644
index 0000000..c5c7dfd
--- /dev/null
+++ b/Bindings/display/snps,arcpgu.txt
@@ -0,0 +1,35 @@
+ARC PGU
+
+This is a display controller found on several development boards produced
+by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
+framebuffer and sends it to a single digital encoder (usually HDMI).
+
+Required properties:
+ - compatible: "snps,arcpgu"
+ - reg: Physical base address and length of the controller's registers.
+ - clocks: A list of phandle + clock-specifier pairs, one for each
+ entry in 'clock-names'.
+ - clock-names: A list of clock names. For ARC PGU it should contain:
+ - "pxlclk" for the clock feeding the output PLL of the controller.
+
+Required sub-nodes:
+ - port: The PGU connection to an encoder chip.
+
+Example:
+
+/ {
+ ...
+
+ pgu@XXXXXXXX {
+ compatible = "snps,arcpgu";
+ reg = <0xXXXXXXXX 0x400>;
+ clocks = <&clock_node>;
+ clock-names = "pxlclk";
+
+ port {
+ pgu_output: endpoint {
+ remote-endpoint = <&hdmi_enc_input>;
+ };
+ };
+ };
+};
diff --git a/Bindings/display/solomon,ssd-common.yaml b/Bindings/display/solomon,ssd-common.yaml
new file mode 100644
index 0000000..3e69984
--- /dev/null
+++ b/Bindings/display/solomon,ssd-common.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Solomon OLED Display Controllers
+
+maintainers:
+ - Javier Martinez Canillas <javierm@redhat.com>
+
+properties:
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ # Only required for SPI
+ dc-gpios:
+ description:
+ GPIO connected to the controller's D/C# (Data/Command) pin,
+ that is needed for 4-wire SPI to tell the controller if the
+ data sent is for a command register or the display data RAM
+ maxItems: 1
+
+ solomon,height:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Height in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
+
+ solomon,width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Width in pixel of the screen driven by the controller.
+ The default value is controller-dependent.
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: true
diff --git a/Bindings/display/solomon,ssd1307fb.yaml b/Bindings/display/solomon,ssd1307fb.yaml
new file mode 100644
index 0000000..3afbb52
--- /dev/null
+++ b/Bindings/display/solomon,ssd1307fb.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd1307fb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD1307 OLED Controller Framebuffer
+
+maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+ - Javier Martinez Canillas <javierm@redhat.com>
+
+properties:
+ compatible:
+ oneOf:
+ # Deprecated compatible strings
+ - enum:
+ - solomon,ssd1305fb-i2c
+ - solomon,ssd1306fb-i2c
+ - solomon,ssd1307fb-i2c
+ - solomon,ssd1309fb-i2c
+ deprecated: true
+ - enum:
+ - sinowealth,sh1106
+ - solomon,ssd1305
+ - solomon,ssd1306
+ - solomon,ssd1307
+ - solomon,ssd1309
+
+ pwms:
+ maxItems: 1
+
+ vbat-supply:
+ description: The supply for VBAT
+
+ solomon,page-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 1
+ description:
+ Offset of pages (band of 8 pixels) that the screen is mapped to
+
+ solomon,segment-no-remap:
+ type: boolean
+ description:
+ Display needs normal (non-inverted) data column to segment mapping
+
+ solomon,col-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+ description:
+ Offset of columns (COL/SEG) that the screen is mapped to
+
+ solomon,com-seq:
+ type: boolean
+ description:
+ Display uses sequential COM pin configuration
+
+ solomon,com-lrremap:
+ type: boolean
+ description:
+ Display uses left-right COM pin remap
+
+ solomon,com-invdir:
+ type: boolean
+ description:
+ Display uses inverted COM pin scan direction
+
+ solomon,com-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+ description:
+ Number of the COM pin wired to the first display line
+
+ solomon,prechargep1:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 2
+ description:
+ Length of deselect period (phase 1) in clock cycles
+
+ solomon,prechargep2:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 2
+ description:
+ Length of precharge period (phase 2) in clock cycles. This needs to be
+ the higher, the higher the capacitance of the OLED's pixels is.
+
+ solomon,dclk-div:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 16
+ description:
+ Clock divisor. The default value is controller-dependent.
+
+ solomon,dclk-frq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+ description:
+ Clock frequency, higher value means higher frequency.
+ The default value is controller-dependent.
+
+ solomon,lookup-table:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ maxItems: 4
+ description:
+ 8 bit value array of current drive pulse widths for BANK0, and colors A,
+ B, and C. Each value in range of 31 to 63 for pulse widths of 32 to 64.
+ Color D is always width 64.
+
+ solomon,area-color-enable:
+ type: boolean
+ description:
+ Display uses color mode
+
+ solomon,low-power:
+ type: boolean
+ description:
+ Display runs in low power mode
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: solomon,ssd-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: sinowealth,sh1106
+ then:
+ properties:
+ width:
+ default: 132
+ height:
+ default: 64
+ solomon,dclk-div:
+ default: 1
+ solomon,dclk-frq:
+ default: 5
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - solomon,ssd1305-i2c
+ - solomon,ssd1305
+ then:
+ properties:
+ width:
+ default: 132
+ height:
+ default: 64
+ solomon,dclk-div:
+ default: 1
+ solomon,dclk-frq:
+ default: 7
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - solomon,ssd1306-i2c
+ - solomon,ssd1306
+ then:
+ properties:
+ width:
+ default: 128
+ height:
+ default: 64
+ solomon,dclk-div:
+ default: 1
+ solomon,dclk-frq:
+ default: 8
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - solomon,ssd1307-i2c
+ - solomon,ssd1307
+ then:
+ properties:
+ width:
+ default: 128
+ height:
+ default: 39
+ solomon,dclk-div:
+ default: 2
+ solomon,dclk-frq:
+ default: 12
+ required:
+ - pwms
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - solomon,ssd1309-i2c
+ - solomon,ssd1309
+ then:
+ properties:
+ width:
+ default: 128
+ height:
+ default: 64
+ solomon,dclk-div:
+ default: 1
+ solomon,dclk-frq:
+ default: 10
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssd1307_i2c: oled@3c {
+ compatible = "solomon,ssd1307";
+ reg = <0x3c>;
+ pwms = <&pwm 4 3000>;
+ reset-gpios = <&gpio2 7>;
+ };
+
+ ssd1306_i2c: oled@3d {
+ compatible = "solomon,ssd1306";
+ reg = <0x3d>;
+ pwms = <&pwm 4 3000>;
+ reset-gpios = <&gpio2 7>;
+ solomon,com-lrremap;
+ solomon,com-invdir;
+ solomon,com-offset = <32>;
+ solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
+ };
+ };
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssd1307_spi: oled@0 {
+ compatible = "solomon,ssd1307";
+ reg = <0x0>;
+ pwms = <&pwm 4 3000>;
+ reset-gpios = <&gpio2 7>;
+ dc-gpios = <&gpio2 8>;
+ spi-max-frequency = <10000000>;
+ };
+
+ ssd1306_spi: oled@1 {
+ compatible = "solomon,ssd1306";
+ reg = <0x1>;
+ pwms = <&pwm 4 3000>;
+ reset-gpios = <&gpio2 7>;
+ dc-gpios = <&gpio2 8>;
+ spi-max-frequency = <10000000>;
+ solomon,com-lrremap;
+ solomon,com-invdir;
+ solomon,com-offset = <32>;
+ solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
+ };
+ };
diff --git a/Bindings/display/solomon,ssd132x.yaml b/Bindings/display/solomon,ssd132x.yaml
new file mode 100644
index 0000000..37975ee
--- /dev/null
+++ b/Bindings/display/solomon,ssd132x.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd132x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD132x OLED Display Controllers
+
+maintainers:
+ - Javier Martinez Canillas <javierm@redhat.com>
+
+properties:
+ compatible:
+ enum:
+ - solomon,ssd1322
+ - solomon,ssd1325
+ - solomon,ssd1327
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: solomon,ssd-common.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: solomon,ssd1322
+ then:
+ properties:
+ width:
+ default: 480
+ height:
+ default: 128
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: solomon,ssd1325
+ then:
+ properties:
+ width:
+ default: 128
+ height:
+ default: 80
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: solomon,ssd1327
+ then:
+ properties:
+ width:
+ default: 128
+ height:
+ default: 128
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ oled@3c {
+ compatible = "solomon,ssd1327";
+ reg = <0x3c>;
+ reset-gpios = <&gpio2 7>;
+ };
+
+ };
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ oled@0 {
+ compatible = "solomon,ssd1327";
+ reg = <0x0>;
+ reset-gpios = <&gpio2 7>;
+ dc-gpios = <&gpio2 8>;
+ spi-max-frequency = <10000000>;
+ };
+ };
diff --git a/Bindings/display/sprd/sprd,display-subsystem.yaml b/Bindings/display/sprd/sprd,display-subsystem.yaml
new file mode 100644
index 0000000..b3d5e1b
--- /dev/null
+++ b/Bindings/display/sprd/sprd,display-subsystem.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc DRM master device
+
+maintainers:
+ - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+ The Unisoc DRM master device is a virtual device needed to list all
+ DPU devices or other display interface nodes that comprise the
+ graphics subsystem.
+
+ Unisoc's display pipeline have several components as below description,
+ multi display controllers and corresponding physical interfaces.
+ For different display scenarios, dpu0 and dpu1 maybe binding to different
+ encoder.
+
+ E.g:
+ dpu0 and dpu1 both binding to DSI for dual mipi-dsi display;
+ dpu0 binding to DSI for primary display, and dpu1 binding to DP for external display;
+
+ +-----------------------------------------+
+ | |
+ | +---------+ |
+ +----+ | +----+ +---------+ |DPHY/CPHY| | +------+
+ | +----->+dpu0+--->+MIPI|DSI +--->+Combo +----->+Panel0|
+ |AXI | | +----+ +---------+ +---------+ | +------+
+ | | | ^ |
+ | | | | |
+ | | | +-----------+ |
+ | | | | |
+ |APB | | +--+-+ +-----------+ +---+ | +------+
+ | +----->+dpu1+--->+DisplayPort+--->+PHY+--------->+Panel1|
+ | | | +----+ +-----------+ +---+ | +------+
+ +----+ | |
+ +-----------------------------------------+
+
+properties:
+ compatible:
+ const: sprd,display-subsystem
+
+ ports:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description:
+ Should contain a list of phandles pointing to display interface port
+ of DPU devices.
+
+required:
+ - compatible
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ display-subsystem {
+ compatible = "sprd,display-subsystem";
+ ports = <&dpu_out>;
+ };
diff --git a/Bindings/display/sprd/sprd,sharkl3-dpu.yaml b/Bindings/display/sprd/sprd,sharkl3-dpu.yaml
new file mode 100644
index 0000000..4ebea60
--- /dev/null
+++ b/Bindings/display/sprd/sprd,sharkl3-dpu.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc Sharkl3 Display Processor Unit (DPU)
+
+maintainers:
+ - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+ DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
+ which transfers the image data from a video memory buffer to an internal
+ LCD interface.
+
+properties:
+ compatible:
+ const: sprd,sharkl3-dpu
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+
+ clock-names:
+ items:
+ - const: clk_src_128m
+ - const: clk_src_384m
+
+ power-domains:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ port:
+ type: object
+ description:
+ A port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ That port should be the output endpoint, usually output to
+ the associated DSI.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/sprd,sc9860-clk.h>
+ dpu: dpu@63000000 {
+ compatible = "sprd,sharkl3-dpu";
+ reg = <0x63000000 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "clk_src_128m", "clk_src_384m";
+
+ clocks = <&pll CLK_TWPLL_128M>,
+ <&pll CLK_TWPLL_384M>;
+
+ dpu_port: port {
+ dpu_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
diff --git a/Bindings/display/sprd/sprd,sharkl3-dsi-host.yaml b/Bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
new file mode 100644
index 0000000..bc5594d
--- /dev/null
+++ b/Bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dsi-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc MIPI DSI Controller
+
+maintainers:
+ - Kevin Tang <kevin.tang@unisoc.com>
+
+properties:
+ compatible:
+ const: sprd,sharkl3-dsi-host
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 2
+
+ clocks:
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: clk_src_96m
+
+ power-domains:
+ maxItems: 1
+
+ ports:
+ type: object
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ port@0:
+ type: object
+ description:
+ A port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ That port should be the input endpoint, usually coming from
+ the associated DPU.
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - port@0
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/sprd,sc9860-clk.h>
+ dsi: dsi@63100000 {
+ compatible = "sprd,sharkl3-dsi-host";
+ reg = <0x63100000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "clk_src_96m";
+ clocks = <&pll CLK_TWPLL_96M>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&dpu_out>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/ssd1289fb.txt b/Bindings/display/ssd1289fb.txt
new file mode 100644
index 0000000..4fcd5e6
--- /dev/null
+++ b/Bindings/display/ssd1289fb.txt
@@ -0,0 +1,13 @@
+* Solomon SSD1289 Framebuffer Driver
+
+Required properties:
+ - compatible: Should be "solomon,ssd1289fb". The only supported bus for
+ now is lbc.
+ - reg: Should contain address of the controller on the LBC bus. The detail
+ was described in Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
+
+Examples:
+display@2,0 {
+ compatible = "solomon,ssd1289fb";
+ reg = <0x2 0x0000 0x0004>;
+};
diff --git a/Bindings/display/st,stih4xx.txt b/Bindings/display/st,stih4xx.txt
new file mode 100644
index 0000000..6778b3e
--- /dev/null
+++ b/Bindings/display/st,stih4xx.txt
@@ -0,0 +1,241 @@
+STMicroelectronics stih4xx platforms
+
+- sti-vtg: video timing generator
+ Required properties:
+ - compatible: "st,vtg"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ Optional properties:
+ - interrupts : VTG interrupt number to the CPU.
+ - st,slave: phandle on a slave vtg
+
+- sti-vtac: video timing advanced inter dye communication Rx and TX
+ Required properties:
+ - compatible: "st,vtac-main" or "st,vtac-aux"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+
+- sti-display-subsystem: Master device for DRM sub-components
+ This device must be the parent of all the sub-components and is responsible
+ of bind them.
+ Required properties:
+ - compatible: "st,sti-display-subsystem"
+ - ranges: to allow probing of subdevices
+
+- sti-compositor: frame compositor engine
+ must be a child of sti-display-subsystem
+ Required properties:
+ - compatible: "st,stih<chip>-compositor"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - resets: resets to be used by the device
+ See ../reset/reset.txt for details.
+ - reset-names: names of the resets listed in resets property in the same
+ order.
+ - st,vtg: phandle(s) on vtg device (main and aux) nodes.
+
+- sti-tvout: video out hardware block
+ must be a child of sti-display-subsystem
+ Required properties:
+ - compatible: "st,stih<chip>-tvout"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - resets: resets to be used by the device
+ See ../reset/reset.txt for details.
+ - reset-names: names of the resets listed in resets property in the same
+ order.
+
+- sti-hdmi: hdmi output block
+ must be a child of sti-display-subsystem
+ Required properties:
+ - compatible: "st,stih<chip>-hdmi";
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - interrupts : HDMI interrupt number to the CPU.
+ - interrupt-names: names of the interrupts listed in interrupts property in
+ the same order
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - ddc: phandle of an I2C controller used for DDC EDID probing
+
+sti-hda:
+ Required properties:
+ must be a child of sti-display-subsystem
+ - compatible: "st,stih<chip>-hda"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+
+sti-dvo:
+ Required properties:
+ must be a child of sti-display-subsystem
+ - compatible: "st,stih<chip>-dvo"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - reg-names: names of the mapped memory regions listed in regs property in
+ the same order.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - pinctrl-0: pin control handle
+ - pinctrl-names: names of the pin control states to use
+ - sti,panel: phandle of the panel connected to the DVO output
+
+sti-hqvdp:
+ must be a child of sti-display-subsystem
+ Required properties:
+ - compatible: "st,stih<chip>-hqvdp"
+ - reg: Physical base address of the IP registers and length of memory mapped region.
+ - clocks: from common clock binding: handle hardware IP needed clocks, the
+ number of clocks may depend of the SoC type.
+ See ../clocks/clock-bindings.txt for details.
+ - clock-names: names of the clocks listed in clocks property in the same
+ order.
+ - resets: resets to be used by the device
+ See ../reset/reset.txt for details.
+ - reset-names: names of the resets listed in resets property in the same
+ order.
+ - st,vtg: phandle on vtg main device node.
+
+Example:
+
+/ {
+ ...
+
+ vtg_main_slave: sti-vtg-main-slave@fe85a800 {
+ compatible = "st,vtg";
+ reg = <0xfe85A800 0x300>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_NONE>;
+ };
+
+ vtg_main: sti-vtg-main-master@fd348000 {
+ compatible = "st,vtg";
+ reg = <0xfd348000 0x400>;
+ st,slave = <&vtg_main_slave>;
+ };
+
+ vtg_aux_slave: sti-vtg-aux-slave@fd348400 {
+ compatible = "st,vtg";
+ reg = <0xfe858200 0x300>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux-master@fd348400 {
+ compatible = "st,vtg";
+ reg = <0xfd348400 0x400>;
+ st,slave = <&vtg_aux_slave>;
+ };
+
+
+ sti-vtac-rx-main@fee82800 {
+ compatible = "st,vtac-main";
+ reg = <0xfee82800 0x200>;
+ clock-names = "vtac";
+ clocks = <&clk_m_a2_div0 CLK_M_VTAC_MAIN_PHY>;
+ };
+
+ sti-vtac-rx-aux@fee82a00 {
+ compatible = "st,vtac-aux";
+ reg = <0xfee82a00 0x200>;
+ clock-names = "vtac";
+ clocks = <&clk_m_a2_div0 CLK_M_VTAC_AUX_PHY>;
+ };
+
+ sti-vtac-tx-main@fd349000 {
+ compatible = "st,vtac-main";
+ reg = <0xfd349000 0x200>, <0xfd320000 0x10000>;
+ clock-names = "vtac";
+ clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+ };
+
+ sti-vtac-tx-aux@fd349200 {
+ compatible = "st,vtac-aux";
+ reg = <0xfd349200 0x200>, <0xfd320000 0x10000>;
+ clock-names = "vtac";
+ clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>;
+ };
+
+ sti-display-subsystem {
+ compatible = "st,sti-display-subsystem";
+ ranges;
+
+ sti-compositor@fd340000 {
+ compatible = "st,stih416-compositor";
+ reg = <0xfd340000 0x1000>;
+ clock-names = "compo_main", "compo_aux",
+ "pix_main", "pix_aux";
+ clocks = <&clk_m_a2_div1 CLK_M_COMPO_MAIN>, <&clk_m_a2_div1 CLK_M_COMPO_AUX>,
+ <&clockgen_c_vcc CLK_S_PIX_MAIN>, <&clockgen_c_vcc CLK_S_PIX_AUX>;
+ reset-names = "compo-main", "compo-aux";
+ resets = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>;
+ st,vtg = <&vtg_main>, <&vtg_aux>;
+ };
+
+ sti-tvout@fe000000 {
+ compatible = "st,stih416-tvout";
+ reg = <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>;
+ reg-names = "tvout-reg", "hda-reg", "syscfg";
+ reset-names = "tvout";
+ resets = <&softreset STIH416_HDTVOUT_SOFTRESET>;
+ };
+
+ sti-hdmi@fe85c000 {
+ compatible = "st,stih416-hdmi";
+ reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>;
+ reg-names = "hdmi-reg", "syscfg";
+ interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>;
+ interrupt-names = "irq";
+ clock-names = "pix", "tmds", "phy", "audio";
+ clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
+ };
+
+ sti-hda@fe85a000 {
+ compatible = "st,stih416-hda";
+ reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>;
+ reg-names = "hda-reg", "video-dacs-ctrl";
+ clock-names = "pix", "hddac";
+ clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
+ };
+
+ sti-dvo@8d00400 {
+ compatible = "st,stih407-dvo";
+ reg = <0x8d00400 0x200>;
+ reg-names = "dvo-reg";
+ clock-names = "dvo_pix", "dvo",
+ "main_parent", "aux_parent";
+ clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
+ <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dvo>;
+ sti,panel = <&panel_dvo>;
+ };
+
+ sti-hqvdp@9c000000 {
+ compatible = "st,stih407-hqvdp";
+ reg = <0x9C00000 0x100000>;
+ clock-names = "hqvdp", "pix_main";
+ clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>, <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
+ reset-names = "hqvdp";
+ resets = <&softreset STIH407_HDQVDP_SOFTRESET>;
+ st,vtg = <&vtg_main>;
+ };
+ };
+ ...
+};
diff --git a/Bindings/display/st,stm32-dsi.yaml b/Bindings/display/st,stm32-dsi.yaml
new file mode 100644
index 0000000..5356005
--- /dev/null
+++ b/Bindings/display/st,stm32-dsi.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DSI host controller
+
+maintainers:
+ - Philippe Cornu <philippe.cornu@foss.st.com>
+ - Yannick Fertre <yannick.fertre@foss.st.com>
+
+description:
+ The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller.
+
+allOf:
+ - $ref: dsi-controller.yaml#
+
+properties:
+ compatible:
+ const: st,stm32-dsi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Module Clock
+ - description: DSI bus clock
+ - description: Pixel clock
+ minItems: 2
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: ref
+ - const: px_clk
+ minItems: 2
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: apb
+
+ phy-dsi-supply:
+ description:
+ Phandle of the regulator that provides the supply voltage.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ DSI input port node, connected to the ltdc rgb output port.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: |
+ DSI output port node, connected to a panel or a bridge input port.
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ properties:
+ data-lanes:
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ #include <dt-bindings/gpio/gpio.h>
+ dsi: dsi@5a000000 {
+ compatible = "st,stm32-dsi";
+ reg = <0x5a000000 0x800>;
+ clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+ clock-names = "pclk", "ref", "px_clk";
+ resets = <&rcc DSI_R>;
+ reset-names = "apb";
+ phy-dsi-supply = <®18>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <<dc_ep1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ panel@0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>;
+ reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+ power-supply = <&v3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/st,stm32-ltdc.yaml b/Bindings/display/st,stm32-ltdc.yaml
new file mode 100644
index 0000000..d6ea4d6
--- /dev/null
+++ b/Bindings/display/st,stm32-ltdc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32-ltdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 lcd-tft display controller
+
+maintainers:
+ - Philippe Cornu <philippe.cornu@foss.st.com>
+ - Yannick Fertre <yannick.fertre@foss.st.com>
+
+properties:
+ compatible:
+ const: st,stm32-ltdc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: events interrupt line.
+ - description: errors interrupt line.
+ minItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: lcd
+
+ resets:
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Video port for DPI RGB output.
+ ltdc has one video port with up to 2 endpoints:
+ - for external dpi rgb panel or bridge, using gpios.
+ - for internal dpi input of the MIPI DSI host controller.
+ Note: These 2 endpoints cannot be activated simultaneously.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ ltdc: display-controller@40016800 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x5a001000 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc LTDC_PX>;
+ clock-names = "lcd";
+ resets = <&rcc LTDC_R>;
+
+ port {
+ ltdc_out_dsi: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/ste,mcde.yaml b/Bindings/display/ste,mcde.yaml
new file mode 100644
index 0000000..564ea84
--- /dev/null
+++ b/Bindings/display/ste,mcde.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ste,mcde.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson Multi Channel Display Engine MCDE
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+ compatible:
+ const: ste,mcde
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description: an array of the MCDE clocks
+ items:
+ - description: MCDECLK (main MCDE clock)
+ - description: LCDCLK (LCD clock)
+ - description: PLLDSI (HDMI clock)
+
+ clock-names:
+ items:
+ - const: mcde
+ - const: lcd
+ - const: hdmi
+
+ resets:
+ maxItems: 1
+
+ epod-supply:
+ description: a phandle to the EPOD regulator
+
+ vana-supply:
+ description: a phandle to the analog voltage regulator
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ A DPI port node
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ "^dsi@[0-9a-f]+$":
+ description: subnodes for the three DSI host adapters
+ type: object
+ $ref: dsi-controller.yaml#
+
+ properties:
+ compatible:
+ const: ste,mcde-dsi
+
+ reg:
+ maxItems: 1
+
+ vana-supply:
+ description: a phandle to the analog voltage regulator
+
+ clocks:
+ description: phandles to the high speed and low power (energy save) clocks
+ the high speed clock is not present on the third (dsi2) block, so it
+ should only have the "lp" clock
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ oneOf:
+ - items:
+ - const: hs
+ - const: lp
+ - items:
+ - const: lp
+
+ required:
+ - compatible
+ - reg
+ - vana-supply
+ - clocks
+ - clock-names
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - epod-supply
+ - vana-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/mfd/dbx500-prcmu.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ mcde@a0350000 {
+ compatible = "ste,mcde";
+ reg = <0xa0350000 0x1000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ epod-supply = <&db8500_b2r2_mcde_reg>;
+ vana-supply = <&ab8500_ldo_ana_reg>;
+ clocks = <&prcmu_clk PRCMU_MCDECLK>,
+ <&prcmu_clk PRCMU_LCDCLK>,
+ <&prcmu_clk PRCMU_PLLDSI>;
+ clock-names = "mcde", "lcd", "hdmi";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dsi0: dsi@a0351000 {
+ compatible = "ste,mcde-dsi";
+ reg = <0xa0351000 0x1000>;
+ vana-supply = <&ab8500_ldo_ana_reg>;
+ clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
+ clock-names = "hs", "lp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,s6d16d0";
+ reg = <0>;
+ vdd1-supply = <&ab8500_ldo_aux1_reg>;
+ reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ dsi1: dsi@a0352000 {
+ compatible = "ste,mcde-dsi";
+ reg = <0xa0352000 0x1000>;
+ vana-supply = <&ab8500_ldo_ana_reg>;
+ clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
+ clock-names = "hs", "lp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ dsi2: dsi@a0353000 {
+ compatible = "ste,mcde-dsi";
+ reg = <0xa0353000 0x1000>;
+ vana-supply = <&ab8500_ldo_ana_reg>;
+ /* This DSI port only has the Low Power / Energy Save clock */
+ clocks = <&prcmu_clk PRCMU_DSI2ESCCLK>;
+ clock-names = "lp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+...
diff --git a/Bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Bindings/display/tegra/nvidia,tegra114-mipi.yaml
new file mode 100644
index 0000000..f448624
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra114-mipi.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra114-mipi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI pad calibration controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^mipi@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra114-mipi
+ - nvidia,tegra210-mipi
+ - nvidia,tegra186-mipi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: module clock
+
+ clock-names:
+ items:
+ - const: mipi-cal
+
+ power-domains:
+ maxItems: 1
+
+ "#nvidia,mipi-calibrate-cells":
+ description: The number of cells in a MIPI calibration specifier.
+ Should be 1. The single cell specifies a bitmask of the pads that
+ need to be calibrated for a given device.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ const: 1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#nvidia,mipi-calibrate-cells"
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra114-car.h>
+
+ mipi@700e3000 {
+ compatible = "nvidia,tegra114-mipi";
+ reg = <0x700e3000 0x100>;
+ clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+ clock-names = "mipi-cal";
+ #nvidia,mipi-calibrate-cells = <1>;
+ };
+
+ dsia: dsi@54300000 {
+ compatible = "nvidia,tegra114-dsi";
+ reg = <0x54300000 0x00040000>;
+ clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+ <&tegra_car TEGRA114_CLK_DSIALP>,
+ <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+ clock-names = "dsi", "lp", "parent";
+ resets = <&tegra_car 48>;
+ reset-names = "dsi";
+ nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml b/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml
new file mode 100644
index 0000000..5cdbc52
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra124-dpaux.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-dpaux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra DisplayPort AUX Interface
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+ The Tegra Display Port Auxiliary (DPAUX) pad controller manages two
+ pins which can be assigned to either the DPAUX channel or to an I2C
+ controller.
+
+ When configured for DisplayPort AUX operation, the DPAUX controller
+ can also be used to communicate with a DisplayPort device using the
+ AUX channel.
+
+properties:
+ $nodename:
+ pattern: "^dpaux@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - nvidia,tegra124-dpaux
+ - nvidia,tegra210-dpaux
+ - nvidia,tegra186-dpaux
+ - nvidia,tegra194-dpaux
+
+ - items:
+ - const: nvidia,tegra132-dpaux
+ - const: nvidia,tegra124-dpaux
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: clock input for the DPAUX hardware
+ - description: reference clock
+
+ clock-names:
+ items:
+ - const: dpaux
+ - const: parent
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: dpaux
+
+ power-domains:
+ maxItems: 1
+
+ i2c-bus:
+ description: Subnode where I2C slave devices are listed. This
+ subnode must be always present. If there are no I2C slave
+ devices, an empty node should be added. See ../../i2c/i2c.yaml
+ for more information.
+ type: object
+
+ aux-bus:
+ $ref: /schemas/display/dp-aux-bus.yaml#
+
+ vdd-supply:
+ description: phandle of a supply that powers the DisplayPort
+ link
+
+patternProperties:
+ "^pinmux-[a-z0-9]+$":
+ description:
+ Since only three configurations are possible, only three child
+ nodes are needed to describe the pin mux'ing options for the
+ DPAUX pads. Furthermore, given that the pad functions are only
+ applicable to a single set of pads, the child nodes only need
+ to describe the pad group the functions are being applied to
+ rather than the individual pads.
+ type: object
+ properties:
+ groups:
+ const: dpaux-io
+
+ function:
+ enum:
+ - aux
+ - i2c
+ - off
+
+ additionalProperties: false
+
+ required:
+ - groups
+ - function
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ dpaux: dpaux@545c0000 {
+ compatible = "nvidia,tegra210-dpaux";
+ reg = <0x545c0000 0x00040000>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
+ <&tegra_car TEGRA210_CLK_PLL_DP>;
+ clock-names = "dpaux", "parent";
+ resets = <&tegra_car 181>;
+ reset-names = "dpaux";
+ power-domains = <&pd_sor>;
+
+ state_dpaux_aux: pinmux-aux {
+ groups = "dpaux-io";
+ function = "aux";
+ };
+
+ state_dpaux_i2c: pinmux-i2c {
+ groups = "dpaux-io";
+ function = "i2c";
+ };
+
+ state_dpaux_off: pinmux-off {
+ groups = "dpaux-io";
+ function = "off";
+ };
+
+ i2c-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra124-sor.yaml b/Bindings/display/tegra/nvidia,tegra124-sor.yaml
new file mode 100644
index 0000000..6f2e224
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra124-sor.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-sor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra SOR Output Encoder
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+ The Serial Output Resource (SOR) can be used to drive HDMI, LVDS, eDP
+ and DP outputs.
+
+properties:
+ $nodename:
+ pattern: "^sor@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - nvidia,tegra124-sor
+ - nvidia,tegra210-sor
+ - nvidia,tegra210-sor1
+ - nvidia,tegra186-sor
+ - nvidia,tegra186-sor1
+ - nvidia,tegra194-sor
+
+ - items:
+ - const: nvidia,tegra132-sor
+ - const: nvidia,tegra124-sor
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 5
+ maxItems: 6
+
+ clock-names:
+ minItems: 5
+ maxItems: 6
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: sor
+
+ power-domains:
+ maxItems: 1
+
+ avdd-io-hdmi-dp-supply:
+ description: I/O supply for HDMI/DP
+
+ vdd-hdmi-dp-pll-supply:
+ description: PLL supply for HDMI/DP
+
+ hdmi-supply:
+ description: +5.0V HDMI connector supply, required for HDMI
+
+ # Tegra186 and later
+ nvidia,interface:
+ description: index of the SOR interface
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ nvidia,ddc-i2c-bus:
+ description: phandle of an I2C controller used for DDC EDID
+ probing
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ nvidia,hpd-gpio:
+ description: specifies a GPIO used for hotplug detection
+ maxItems: 1
+
+ nvidia,edid:
+ description: supplies a binary EDID blob
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+
+ nvidia,panel:
+ description: phandle of a display panel, required for eDP
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ nvidia,xbar-cfg:
+ description: 5 cells containing the crossbar configuration.
+ Each lane of the SOR, identified by the cell's index, is
+ mapped via the crossbar to the pad specified by the cell's
+ value.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ # optional when driving an eDP output
+ nvidia,dpaux:
+ description: phandle to a DisplayPort AUX interface
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra186-sor
+ - nvidia,tegra194-sor
+ then:
+ properties:
+ clocks:
+ items:
+ - description: clock input for the SOR hardware
+ - description: SOR output clock
+ - description: input for the pixel clock
+ - description: reference clock for the SOR clock
+ - description: safe reference clock for the SOR clock
+ during power up
+ - description: SOR pad output clock
+
+ clock-names:
+ items:
+ - const: sor
+ - enum:
+ - source # deprecated
+ - out
+ - const: parent
+ - const: dp
+ - const: safe
+ - const: pad
+ else:
+ properties:
+ clocks:
+ items:
+ - description: clock input for the SOR hardware
+ - description: SOR output clock
+ - description: input for the pixel clock
+ - description: reference clock for the SOR clock
+ - description: safe reference clock for the SOR clock
+ during power up
+
+ clock-names:
+ items:
+ - const: sor
+ - enum:
+ - source # deprecated
+ - out
+ - const: parent
+ - const: dp
+ - const: safe
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - avdd-io-hdmi-dp-supply
+ - vdd-hdmi-dp-pll-supply
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/gpio/tegra-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ sor0: sor@54540000 {
+ compatible = "nvidia,tegra210-sor";
+ reg = <0x54540000 0x00040000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+ <&tegra_car TEGRA210_CLK_SOR0_OUT>,
+ <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
+ <&tegra_car TEGRA210_CLK_PLL_DP>,
+ <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+ clock-names = "sor", "out", "parent", "dp", "safe";
+ resets = <&tegra_car 182>;
+ reset-names = "sor";
+ pinctrl-0 = <&state_dpaux_aux>;
+ pinctrl-1 = <&state_dpaux_i2c>;
+ pinctrl-2 = <&state_dpaux_off>;
+ pinctrl-names = "aux", "i2c", "off";
+ power-domains = <&pd_sor>;
+
+ avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+ vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+ hdmi-supply = <&vdd_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) GPIO_ACTIVE_LOW>;
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra124-vic.yaml b/Bindings/display/tegra/nvidia,tegra124-vic.yaml
new file mode 100644
index 0000000..7200095
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra124-vic.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Image Composer
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^vic@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - nvidia,tegra124-vic
+ - nvidia,tegra210-vic
+ - nvidia,tegra186-vic
+ - nvidia,tegra194-vic
+ - nvidia,tegra234-vic
+
+ - items:
+ - const: nvidia,tegra132-vic
+ - const: nvidia,tegra124-vic
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: clock input for the VIC hardware
+
+ clock-names:
+ items:
+ - const: vic
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: vic
+
+ power-domains:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ description: Description of the interconnect paths for the VIC;
+ see ../interconnect/interconnect.txt for details.
+ items:
+ - description: memory read client for VIC
+ - description: memory write client for VIC
+
+ interconnect-names:
+ items:
+ - const: dma-mem # read
+ - const: write
+
+ dma-coherent: true
+
+additionalProperties: false
diff --git a/Bindings/display/tegra/nvidia,tegra186-dc.yaml b/Bindings/display/tegra/nvidia,tegra186-dc.yaml
new file mode 100644
index 0000000..ce45894
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra186-dc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^display@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra186-dc
+ - nvidia,tegra194-dc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: display controller pixel clock
+
+ clock-names:
+ items:
+ - const: dc
+
+ resets:
+ items:
+ - description: display controller reset
+
+ reset-names:
+ items:
+ - const: dc
+
+ power-domains:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ description: Description of the interconnect paths for the
+ display controller; see ../interconnect/interconnect.txt
+ for details.
+
+ interconnect-names:
+ items:
+ - const: dma-mem # read-0
+ - const: read-1
+
+ nvidia,outputs:
+ description: A list of phandles of outputs that this display
+ controller can drive.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+ nvidia,head:
+ description: The number of the display controller head. This
+ is used to setup the various types of output to receive
+ video data from the given head.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - power-domains
+ - nvidia,outputs
+ - nvidia,head
+
+# see nvidia,tegra186-display.yaml for examples
diff --git a/Bindings/display/tegra/nvidia,tegra186-display.yaml b/Bindings/display/tegra/nvidia,tegra186-display.yaml
new file mode 100644
index 0000000..117c371
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra186-display.yaml
@@ -0,0 +1,308 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Hub
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^display-hub@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra186-display
+ - nvidia,tegra194-display
+
+ '#address-cells':
+ enum: [ 1, 2 ]
+
+ '#size-cells':
+ enum: [ 1, 2 ]
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ minItems: 2
+ maxItems: 3
+
+ resets:
+ items:
+ - description: display hub reset
+ - description: window group 0 reset
+ - description: window group 1 reset
+ - description: window group 2 reset
+ - description: window group 3 reset
+ - description: window group 4 reset
+ - description: window group 5 reset
+
+ reset-names:
+ items:
+ - const: misc
+ - const: wgrp0
+ - const: wgrp1
+ - const: wgrp2
+ - const: wgrp3
+ - const: wgrp4
+ - const: wgrp5
+
+ power-domains:
+ maxItems: 1
+
+ ranges:
+ maxItems: 1
+
+patternProperties:
+ "^display@[0-9a-f]+$":
+ type: object
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra186-display
+ then:
+ properties:
+ clocks:
+ items:
+ - description: display core clock
+ - description: display stream compression clock
+ - description: display hub clock
+
+ clock-names:
+ items:
+ - const: disp
+ - const: dsc
+ - const: hub
+ else:
+ properties:
+ clocks:
+ items:
+ - description: display core clock
+ - description: display hub clock
+
+ clock-names:
+ items:
+ - const: disp
+ - const: hub
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - power-domains
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra186-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/memory/tegra186-mc.h>
+ #include <dt-bindings/power/tegra186-powergate.h>
+ #include <dt-bindings/reset/tegra186-reset.h>
+
+ display-hub@15200000 {
+ compatible = "nvidia,tegra186-display";
+ reg = <0x15200000 0x00040000>;
+ resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
+ <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
+ <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
+ <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>,
+ <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>,
+ <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>,
+ <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>;
+ reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+ "wgrp3", "wgrp4", "wgrp5";
+ clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>,
+ <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
+ <&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
+ clock-names = "disp", "dsc", "hub";
+
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x15200000 0x15200000 0x40000>;
+
+ display@15200000 {
+ compatible = "nvidia,tegra186-dc";
+ reg = <0x15200000 0x10000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
+ clock-names = "dc";
+ resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>;
+ reset-names = "dc";
+
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+ interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+ <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+ interconnect-names = "dma-mem", "read-1";
+ iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+ nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+ nvidia,head = <0>;
+ };
+
+ display@15210000 {
+ compatible = "nvidia,tegra186-dc";
+ reg = <0x15210000 0x10000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
+ clock-names = "dc";
+ resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>;
+ reset-names = "dc";
+
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+ interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+ <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+ interconnect-names = "dma-mem", "read-1";
+ iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+ nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+ nvidia,head = <1>;
+ };
+
+ display@15220000 {
+ compatible = "nvidia,tegra186-dc";
+ reg = <0x15220000 0x10000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
+ clock-names = "dc";
+ resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>;
+ reset-names = "dc";
+
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+ interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+ <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+ interconnect-names = "dma-mem", "read-1";
+ iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+ nvidia,outputs = <&sor0 &sor1>;
+ nvidia,head = <2>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/clock/tegra194-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/memory/tegra194-mc.h>
+ #include <dt-bindings/power/tegra194-powergate.h>
+ #include <dt-bindings/reset/tegra194-reset.h>
+
+ display-hub@15200000 {
+ compatible = "nvidia,tegra194-display";
+ reg = <0x15200000 0x00040000>;
+ resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>,
+ <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>;
+ reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+ "wgrp3", "wgrp4", "wgrp5";
+ clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
+ <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
+ clock-names = "disp", "hub";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x15200000 0x15200000 0x40000>;
+
+ display@15200000 {
+ compatible = "nvidia,tegra194-dc";
+ reg = <0x15200000 0x10000>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>;
+ clock-names = "dc";
+ resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>;
+ reset-names = "dc";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+ interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+ <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+ interconnect-names = "dma-mem", "read-1";
+
+ nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+ nvidia,head = <0>;
+ };
+
+ display@15210000 {
+ compatible = "nvidia,tegra194-dc";
+ reg = <0x15210000 0x10000>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>;
+ clock-names = "dc";
+ resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>;
+ reset-names = "dc";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+ interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+ <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+ interconnect-names = "dma-mem", "read-1";
+
+ nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+ nvidia,head = <1>;
+ };
+
+ display@15220000 {
+ compatible = "nvidia,tegra194-dc";
+ reg = <0x15220000 0x10000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>;
+ clock-names = "dc";
+ resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>;
+ reset-names = "dc";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+ interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+ <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+ interconnect-names = "dma-mem", "read-1";
+
+ nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+ nvidia,head = <2>;
+ };
+
+ display@15230000 {
+ compatible = "nvidia,tegra194-dc";
+ reg = <0x15230000 0x10000>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>;
+ clock-names = "dc";
+ resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>;
+ reset-names = "dc";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+ interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+ <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+ interconnect-names = "dma-mem", "read-1";
+
+ nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+ nvidia,head = <3>;
+ };
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
new file mode 100644
index 0000000..da75b71
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dsi-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI DSI pad controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^padctl@[0-9a-f]+$"
+
+ compatible:
+ const: nvidia,tegra186-dsi-padctl
+
+ reg:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: dsi
+
+allOf:
+ - $ref: /schemas/reset/reset.yaml
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/reset/tegra186-reset.h>
+
+ padctl@15880000 {
+ compatible = "nvidia,tegra186-dsi-padctl";
+ reg = <0x15880000 0x10000>;
+ resets = <&bpmp TEGRA186_RESET_DSI>;
+ reset-names = "dsi";
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-dc.yaml b/Bindings/display/tegra/nvidia,tegra20-dc.yaml
new file mode 100644
index 0000000..69be95a
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-dc.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^dc@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - nvidia,tegra20-dc
+ - nvidia,tegra30-dc
+ - nvidia,tegra114-dc
+ - nvidia,tegra124-dc
+ - nvidia,tegra210-dc
+
+ - items:
+ - const: nvidia,tegra124-dc
+ - const: nvidia,tegra132-dc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: display controller pixel clock
+ - description: parent clock # optional
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: dc
+ - const: parent # optional
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: dc
+
+ interconnect-names: true
+ interconnects: true
+
+ iommus:
+ maxItems: 1
+
+ operating-points-v2: true
+
+ power-domains:
+ items:
+ - description: phandle to the core power domain
+
+ memory-region: true
+
+ nvidia,head:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The number of the display controller head. This is used to setup the various
+ types of output to receive video data from the given head.
+
+ nvidia,outputs:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: A list of phandles of outputs that this display controller can drive.
+
+ rgb:
+ type: object
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-dc
+ - nvidia,tegra30-dc
+ - nvidia,tegra114-dc
+ then:
+ properties:
+ interconnects:
+ items:
+ - description: window A memory client
+ - description: window B memory client
+ - description: window B memory client (vertical filter)
+ - description: window C memory client
+ - description: cursor memory client
+
+ interconnect-names:
+ items:
+ - const: wina
+ - const: winb
+ - const: winb-vfilter
+ - const: winc
+ - const: cursor
+
+ rgb:
+ description: Each display controller node has a child node, named "rgb", that represents
+ the RGB output associated with the controller.
+ type: object
+ properties:
+ nvidia,ddc-i2c-bus:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle of an I2C controller used for DDC EDID probing
+
+ nvidia,hpd-gpio:
+ description: specifies a GPIO used for hotplug detection
+ maxItems: 1
+
+ nvidia,edid:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ description: supplies a binary EDID blob
+
+ nvidia,panel:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle of a display panel
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra124-dc
+ then:
+ properties:
+ interconnects:
+ minItems: 4
+ items:
+ - description: window A memory client
+ - description: window B memory client
+ - description: window C memory client
+ - description: cursor memory client
+ - description: window D memory client
+ - description: window T memory client
+
+ interconnect-names:
+ minItems: 4
+ items:
+ - const: wina
+ - const: winb
+ - const: winc
+ - const: cursor
+ - const: wind
+ - const: wint
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ dc@54200000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+ clock-names = "dc";
+ resets = <&tegra_car 27>;
+ reset-names = "dc";
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Bindings/display/tegra/nvidia,tegra20-dsi.yaml
new file mode 100644
index 0000000..59e1dc0
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-dsi.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Serial Interface
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - nvidia,tegra20-dsi
+ - nvidia,tegra30-dsi
+ - nvidia,tegra114-dsi
+ - nvidia,tegra124-dsi
+ - nvidia,tegra210-dsi
+ - nvidia,tegra186-dsi
+
+ - items:
+ - const: nvidia,tegra132-dsi
+ - const: nvidia,tegra124-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 3
+
+ clock-names:
+ minItems: 2
+ maxItems: 3
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: dsi
+
+ operating-points-v2: true
+
+ power-domains:
+ maxItems: 1
+
+ avdd-dsi-csi-supply:
+ description: phandle of a supply that powers the DSI controller
+
+ nvidia,mipi-calibrate:
+ description: Should contain a phandle and a specifier specifying
+ which pads are used by this DSI output and need to be
+ calibrated. See nvidia,tegra114-mipi.yaml for details.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+ nvidia,ddc-i2c-bus:
+ description: phandle of an I2C controller used for DDC EDID
+ probing
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ nvidia,hpd-gpio:
+ description: specifies a GPIO used for hotplug detection
+ maxItems: 1
+
+ nvidia,edid:
+ description: supplies a binary EDID blob
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+
+ nvidia,panel:
+ description: phandle of a display panel
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ nvidia,ganged-mode:
+ description: contains a phandle to a second DSI controller to
+ gang up with in order to support up to 8 data lanes
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+ - $ref: ../dsi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-dsi
+ - nvidia,tegra30-dsi
+ then:
+ properties:
+ clocks:
+ items:
+ - description: DSI module clock
+ - description: input for the pixel clock
+
+ clock-names:
+ items:
+ - const: dsi
+ - const: parent
+ else:
+ properties:
+ clocks:
+ items:
+ - description: DSI module clock
+ - description: low-power module clock
+ - description: input for the pixel clock
+
+ clock-names:
+ items:
+ - const: dsi
+ - const: lp
+ - const: parent
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra186-dsi
+ then:
+ required:
+ - interrupts
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra186-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/tegra186-powergate.h>
+ #include <dt-bindings/reset/tegra186-reset.h>
+
+ dsi@15300000 {
+ compatible = "nvidia,tegra186-dsi";
+ reg = <0x15300000 0x10000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&bpmp TEGRA186_CLK_DSI>,
+ <&bpmp TEGRA186_CLK_DSIA_LP>,
+ <&bpmp TEGRA186_CLK_PLLD>;
+ clock-names = "dsi", "lp", "parent";
+ resets = <&bpmp TEGRA186_RESET_DSI>;
+ reset-names = "dsi";
+
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-epp.yaml b/Bindings/display/tegra/nvidia,tegra20-epp.yaml
new file mode 100644
index 0000000..3c095a5
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-epp.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-epp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Encoder Pre-Processor
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^epp@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra20-epp
+ - nvidia,tegra30-epp
+ - nvidia,tegra114-epp
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: epp
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 4
+
+ interconnect-names:
+ maxItems: 4
+
+ operating-points-v2: true
+
+ power-domains:
+ items:
+ - description: phandle to the core power domain
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ epp@540c0000 {
+ compatible = "nvidia,tegra20-epp";
+ reg = <0x540c0000 0x00040000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_EPP>;
+ resets = <&tegra_car 19>;
+ reset-names = "epp";
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-gr2d.yaml b/Bindings/display/tegra/nvidia,tegra20-gr2d.yaml
new file mode 100644
index 0000000..1026b0b
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-gr2d.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 2D graphics engine
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^gr2d@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra20-gr2d
+ - nvidia,tegra30-gr2d
+ - nvidia,tegra114-gr2d
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: module clock
+
+ resets:
+ items:
+ - description: module reset
+ - description: memory client hotflush reset
+
+ reset-names:
+ items:
+ - const: 2d
+ - const: mc
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 4
+
+ interconnect-names:
+ maxItems: 4
+
+ operating-points-v2: true
+
+ power-domains:
+ items:
+ - description: phandle to the HEG or core power domain
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/memory/tegra20-mc.h>
+
+ gr2d@54140000 {
+ compatible = "nvidia,tegra20-gr2d";
+ reg = <0x54140000 0x00040000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+ resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+ reset-names = "2d", "mc";
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-gr3d.yaml b/Bindings/display/tegra/nvidia,tegra20-gr3d.yaml
new file mode 100644
index 0000000..59a52e7
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-gr3d.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 3D graphics engine
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^gr3d@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra20-gr3d
+ - nvidia,tegra30-gr3d
+ - nvidia,tegra114-gr3d
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+
+ resets:
+ minItems: 2
+ maxItems: 4
+
+ reset-names:
+ minItems: 2
+ maxItems: 4
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ interconnects:
+ minItems: 4
+ maxItems: 10
+
+ interconnect-names:
+ minItems: 4
+ maxItems: 10
+
+ operating-points-v2: true
+
+ power-domains:
+ minItems: 1
+ maxItems: 2
+
+ power-domain-names:
+ maxItems: 2
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra20-gr2d
+ then:
+ properties:
+ clocks:
+ items:
+ - description: module clock
+
+ clock-names:
+ items:
+ - const: 3d
+
+ resets:
+ items:
+ - description: module reset
+ - description: memory client hotflush reset
+
+ reset-names:
+ items:
+ - const: 3d
+ - const: mc
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ minItems: 4
+ maxItems: 4
+
+ interconnect-names:
+ minItems: 4
+ maxItems: 4
+
+ power-domains:
+ items:
+ - description: phandle to the TD power domain
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra30-gr3d
+ then:
+ properties:
+ clocks:
+ items:
+ - description: primary module clock
+ - description: secondary module clock
+
+ clock-names:
+ items:
+ - const: 3d
+ - const: 3d2
+
+ resets:
+ items:
+ - description: primary module reset
+ - description: secondary module reset
+ - description: primary memory client hotflush reset
+ - description: secondary memory client hotflush reset
+
+ reset-names:
+ items:
+ - const: 3d
+ - const: 3d2
+ - const: mc
+ - const: mc2
+
+ iommus:
+ minItems: 2
+ maxItems: 2
+
+ interconnects:
+ minItems: 8
+ maxItems: 8
+
+ interconnect-names:
+ minItems: 8
+ maxItems: 8
+
+ power-domains:
+ items:
+ - description: phandle to the TD power domain
+ - description: phandle to the TD2 power domain
+
+ power-domain-names:
+ items:
+ - const: 3d0
+ - const: 3d1
+
+ dependencies:
+ power-domains: [ power-domain-names ]
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra114-gr2d
+ then:
+ properties:
+ clocks:
+ items:
+ - description: module clock
+
+ clock-names:
+ items:
+ - const: 3d
+
+ resets:
+ items:
+ - description: module reset
+ - description: memory client hotflush reset
+
+ reset-names:
+ items:
+ - const: 3d
+ - const: mc
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ minItems: 10
+ maxItems: 10
+
+ interconnect-names:
+ minItems: 10
+ maxItems: 10
+
+ power-domains:
+ items:
+ - description: phandle to the TD power domain
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/memory/tegra20-mc.h>
+
+ gr3d@54180000 {
+ compatible = "nvidia,tegra20-gr3d";
+ reg = <0x54180000 0x00040000>;
+ clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+ resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+ reset-names = "3d", "mc";
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Bindings/display/tegra/nvidia,tegra20-hdmi.yaml
new file mode 100644
index 0000000..f77197e
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-hdmi.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDMI Output Encoder
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^hdmi@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - nvidia,tegra20-hdmi
+ - nvidia,tegra30-hdmi
+ - nvidia,tegra114-hdmi
+ - nvidia,tegra124-hdmi
+
+ - items:
+ - const: nvidia,tegra132-hdmi
+ - const: nvidia,tegra124-hdmi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: module clock
+ - description: parent clock
+
+ clock-names:
+ items:
+ - const: hdmi
+ - const: parent
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: hdmi
+
+ operating-points-v2: true
+
+ power-domains:
+ items:
+ - description: phandle to the core power domain
+
+ hdmi-supply:
+ description: supply for the +5V HDMI connector pin
+
+ vdd-supply:
+ description: regulator for supply voltage
+
+ pll-supply:
+ description: regulator for PLL
+
+ nvidia,ddc-i2c-bus:
+ description: phandle of an I2C controller used for DDC EDID
+ probing
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ nvidia,hpd-gpio:
+ description: specifies a GPIO used for hotplug detection
+ maxItems: 1
+
+ nvidia,edid:
+ description: supplies a binary EDID blob
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+
+ nvidia,panel:
+ description: phandle of a display panel
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ "#sound-dai-cells":
+ const: 0
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - pll-supply
+ - vdd-supply
+ - nvidia,ddc-i2c-bus
+ - nvidia,hpd-gpio
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra124-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/tegra-gpio.h>
+
+ hdmi@54280000 {
+ compatible = "nvidia,tegra124-hdmi";
+ reg = <0x54280000 0x00040000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+ <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+ clock-names = "hdmi", "parent";
+ resets = <&tegra_car 51>;
+ reset-names = "hdmi";
+
+ hdmi-supply = <&vdd_5v0_hdmi>;
+ pll-supply = <&vdd_hdmi_pll>;
+ vdd-supply = <&vdd_3v3_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Bindings/display/tegra/nvidia,tegra20-host1x.yaml
new file mode 100644
index 0000000..94c5242
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-host1x.yaml
@@ -0,0 +1,430 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-host1x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra host1x controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+description: The host1x top-level node defines a number of children, each
+ representing one of the host1x client modules defined in this binding.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - nvidia,tegra20-host1x
+ - nvidia,tegra30-host1x
+ - nvidia,tegra114-host1x
+ - nvidia,tegra124-host1x
+ - nvidia,tegra210-host1x
+ - nvidia,tegra186-host1x
+ - nvidia,tegra194-host1x
+ - nvidia,tegra234-host1x
+
+ - items:
+ - const: nvidia,tegra132-host1x
+ - const: nvidia,tegra124-host1x
+
+ reg:
+ minItems: 1
+ maxItems: 3
+
+ reg-names:
+ minItems: 1
+ maxItems: 3
+
+ interrupts:
+ minItems: 1
+ maxItems: 9
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 9
+
+ '#address-cells':
+ description: The number of cells used to represent physical base addresses
+ in the host1x address space.
+ enum: [1, 2]
+
+ '#size-cells':
+ description: The number of cells used to represent the size of an address
+ range in the host1x address space.
+ enum: [1, 2]
+
+ ranges:
+ maxItems: 1
+
+ clocks:
+ description: Must contain one entry, for the module clock. See
+ ../clocks/clock-bindings.txt for details.
+
+ clock-names:
+ items:
+ - const: host1x
+
+ resets:
+ minItems: 1 # MC reset is optional on Tegra186 and later
+ items:
+ - description: module reset
+ - description: memory client hotflush reset
+
+ reset-names:
+ minItems: 1 # MC reset is optional on Tegra186 and later
+ items:
+ - const: host1x
+ - const: mc
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ items:
+ - description: memory read client for host1x
+
+ interconnect-names:
+ items:
+ - const: dma-mem # read
+
+ operating-points-v2: true
+
+ power-domains:
+ items:
+ - description: phandle to the HEG or core power domain
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - '#address-cells'
+ - '#size-cells'
+ - ranges
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties:
+ type: object
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-host1x
+ - nvidia,tegra30-host1x
+ - nvidia,tegra114-host1x
+ - nvidia,tegra124-host1x
+ - nvidia,tegra210-host1x
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: host1x syncpoint interrupt
+ - description: host1x general interrupt
+
+ interrupt-names:
+ items:
+ - const: syncpt
+ - const: host1x
+ required:
+ - resets
+ - reset-names
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra186-host1x
+ - nvidia,tegra194-host1x
+ then:
+ properties:
+ reg-names:
+ items:
+ - const: hypervisor
+ - const: vm
+
+ reg:
+ items:
+ - description: region used by the hypervisor
+ - description: region assigned to the virtual machine
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: host1x syncpoint interrupt
+ - description: host1x general interrupt
+
+ interrupt-names:
+ items:
+ - const: syncpt
+ - const: host1x
+
+ iommu-map:
+ description: Specification of stream IDs available for memory context device
+ use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+ usable stream IDs.
+
+ required:
+ - reg-names
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra234-host1x
+ then:
+ properties:
+ reg-names:
+ items:
+ - const: common
+ - const: hypervisor
+ - const: vm
+
+ reg:
+ items:
+ - description: region used by host1x server
+ - description: region used by the hypervisor
+ - description: region assigned to the virtual machine
+
+ interrupts:
+ items:
+ - description: host1x syncpoint interrupt 0
+ - description: host1x syncpoint interrupt 1
+ - description: host1x syncpoint interrupt 2
+ - description: host1x syncpoint interrupt 3
+ - description: host1x syncpoint interrupt 4
+ - description: host1x syncpoint interrupt 5
+ - description: host1x syncpoint interrupt 6
+ - description: host1x syncpoint interrupt 7
+ - description: host1x general interrupt
+
+ interrupt-names:
+ items:
+ - const: syncpt0
+ - const: syncpt1
+ - const: syncpt2
+ - const: syncpt3
+ - const: syncpt4
+ - const: syncpt5
+ - const: syncpt6
+ - const: syncpt7
+ - const: host1x
+
+ iommu-map:
+ description: Specification of stream IDs available for memory context device
+ use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+ usable stream IDs.
+
+ required:
+ - reg-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/gpio/tegra-gpio.h>
+ #include <dt-bindings/memory/tegra20-mc.h>
+
+ host1x@50000000 {
+ compatible = "nvidia,tegra20-host1x";
+ reg = <0x50000000 0x00024000>;
+ interrupts = <0 65 0x04>, /* mpcore syncpt */
+ <0 67 0x04>; /* mpcore general */
+ interrupt-names = "syncpt", "host1x";
+ clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+ clock-names = "host1x";
+ resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>;
+ reset-names = "host1x", "mc";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x54000000 0x54000000 0x04000000>;
+
+ mpe@54040000 {
+ compatible = "nvidia,tegra20-mpe";
+ reg = <0x54040000 0x00040000>;
+ interrupts = <0 68 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_MPE>;
+ resets = <&tegra_car 60>;
+ reset-names = "mpe";
+ };
+
+ vi@54080000 {
+ compatible = "nvidia,tegra20-vi";
+ reg = <0x54080000 0x00040000>;
+ interrupts = <0 69 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_VI>;
+ resets = <&tegra_car 100>;
+ reset-names = "vi";
+ };
+
+ epp@540c0000 {
+ compatible = "nvidia,tegra20-epp";
+ reg = <0x540c0000 0x00040000>;
+ interrupts = <0 70 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_EPP>;
+ resets = <&tegra_car 19>;
+ reset-names = "epp";
+ };
+
+ isp@54100000 {
+ compatible = "nvidia,tegra20-isp";
+ reg = <0x54100000 0x00040000>;
+ interrupts = <0 71 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_ISP>;
+ resets = <&tegra_car 23>;
+ reset-names = "isp";
+ };
+
+ gr2d@54140000 {
+ compatible = "nvidia,tegra20-gr2d";
+ reg = <0x54140000 0x00040000>;
+ interrupts = <0 72 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+ resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+ reset-names = "2d", "mc";
+ };
+
+ gr3d@54180000 {
+ compatible = "nvidia,tegra20-gr3d";
+ reg = <0x54180000 0x00040000>;
+ clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+ resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+ reset-names = "3d", "mc";
+ };
+
+ dc@54200000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <0 73 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+ clock-names = "dc";
+ resets = <&tegra_car 27>;
+ reset-names = "dc";
+
+ rgb {
+ };
+ };
+
+ dc@54240000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54240000 0x00040000>;
+ interrupts = <0 74 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_DISP2>;
+ clock-names = "dc";
+ resets = <&tegra_car 26>;
+ reset-names = "dc";
+
+ rgb {
+ };
+ };
+
+ hdmi@54280000 {
+ compatible = "nvidia,tegra20-hdmi";
+ reg = <0x54280000 0x00040000>;
+ interrupts = <0 75 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+ <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+ clock-names = "hdmi", "parent";
+ resets = <&tegra_car 51>;
+ reset-names = "hdmi";
+
+ hdmi-supply = <&vdd_5v0_hdmi>;
+ pll-supply = <&vdd_hdmi_pll>;
+ vdd-supply = <&vdd_3v3_hdmi>;
+
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ tvo@542c0000 {
+ compatible = "nvidia,tegra20-tvo";
+ reg = <0x542c0000 0x00040000>;
+ interrupts = <0 76 0x04>;
+ clocks = <&tegra_car TEGRA20_CLK_TVO>;
+ };
+
+ dsi@54300000 {
+ compatible = "nvidia,tegra20-dsi";
+ reg = <0x54300000 0x00040000>;
+ clocks = <&tegra_car TEGRA20_CLK_DSI>,
+ <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+ clock-names = "dsi", "parent";
+ resets = <&tegra_car 48>;
+ reset-names = "dsi";
+ };
+ };
+
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/memory/tegra210-mc.h>
+
+ host1x@50000000 {
+ compatible = "nvidia,tegra210-host1x";
+ reg = <0x50000000 0x00024000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* mpcore syncpt */
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* mpcore general */
+ interrupt-names = "syncpt", "host1x";
+ clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
+ clock-names = "host1x";
+ resets = <&tegra_car 28>;
+ reset-names = "host1x";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x54000000 0x54000000 0x01000000>;
+ iommus = <&mc TEGRA_SWGROUP_HC>;
+
+ vi@54080000 {
+ compatible = "nvidia,tegra210-vi";
+ reg = <0x54080000 0x00000700>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+ clocks = <&tegra_car TEGRA210_CLK_VI>;
+ power-domains = <&pd_venc>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x0 0x54080000 0x2000>;
+
+ csi@838 {
+ compatible = "nvidia,tegra210-csi";
+ reg = <0x838 0x1300>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+ <&tegra_car TEGRA210_CLK_CILCD>,
+ <&tegra_car TEGRA210_CLK_CILE>,
+ <&tegra_car TEGRA210_CLK_CSI_TPG>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+ <&tegra_car TEGRA210_CLK_PLL_P>,
+ <&tegra_car TEGRA210_CLK_PLL_P>;
+ assigned-clock-rates = <102000000>,
+ <102000000>,
+ <102000000>,
+ <972000000>;
+
+ clocks = <&tegra_car TEGRA210_CLK_CSI>,
+ <&tegra_car TEGRA210_CLK_CILAB>,
+ <&tegra_car TEGRA210_CLK_CILCD>,
+ <&tegra_car TEGRA210_CLK_CILE>,
+ <&tegra_car TEGRA210_CLK_CSI_TPG>;
+ clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+ power-domains = <&pd_sor>;
+ };
+ };
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-isp.yaml b/Bindings/display/tegra/nvidia,tegra20-isp.yaml
new file mode 100644
index 0000000..3bc3b22
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-isp.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra ISP processor
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra20-isp
+ - nvidia,tegra30-isp
+ - nvidia,tegra210-isp
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: module clock
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: isp
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ items:
+ - description: memory write client
+
+ interconnect-names:
+ items:
+ - const: dma-mem # write
+
+ power-domains:
+ items:
+ - description: phandle to the VENC or core power domain
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ isp@54100000 {
+ compatible = "nvidia,tegra20-isp";
+ reg = <0x54100000 0x00040000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_ISP>;
+ resets = <&tegra_car 23>;
+ reset-names = "isp";
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-mpe.yaml b/Bindings/display/tegra/nvidia,tegra20-mpe.yaml
new file mode 100644
index 0000000..2cd3e60
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-mpe.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-mpe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Encoder
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^mpe@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra20-mpe
+ - nvidia,tegra30-mpe
+ - nvidia,tegra114-mpe
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: module clock
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: mpe
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 6
+
+ interconnect-names:
+ maxItems: 6
+
+ operating-points-v2: true
+
+ power-domains:
+ items:
+ - description: phandle to the MPE power domain
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mpe@54040000 {
+ compatible = "nvidia,tegra20-mpe";
+ reg = <0x54040000 0x00040000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_MPE>;
+ resets = <&tegra_car 60>;
+ reset-names = "mpe";
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-tvo.yaml b/Bindings/display/tegra/nvidia,tegra20-tvo.yaml
new file mode 100644
index 0000000..6c84d8b
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-tvo.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-tvo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra TV Encoder Output
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^tvo@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra20-tvo
+ - nvidia,tegra30-tvo
+ - nvidia,tegra114-tvo
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: module clock
+
+ operating-points-v2: true
+
+ power-domains:
+ items:
+ - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tvo@542c0000 {
+ compatible = "nvidia,tegra20-tvo";
+ reg = <0x542c0000 0x00040000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_TVO>;
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-vi.yaml b/Bindings/display/tegra/nvidia,tegra20-vi.yaml
new file mode 100644
index 0000000..2181855
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-vi.yaml
@@ -0,0 +1,221 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Input controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^vi@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - const: nvidia,tegra20-vi
+ - const: nvidia,tegra30-vi
+ - const: nvidia,tegra114-vi
+ - const: nvidia,tegra124-vi
+ - items:
+ - const: nvidia,tegra132-vi
+ - const: nvidia,tegra124-vi
+ - const: nvidia,tegra210-vi
+ - const: nvidia,tegra186-vi
+ - const: nvidia,tegra194-vi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: vi
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ minItems: 4
+ maxItems: 5
+
+ interconnect-names:
+ minItems: 4
+ maxItems: 5
+
+ operating-points-v2: true
+
+ power-domains:
+ items:
+ - description: phandle to the VENC power domain
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ ranges:
+ maxItems: 1
+
+ avdd-dsi-csi-supply:
+ description: DSI/CSI power supply. Must supply 1.2 V.
+
+ vip:
+ $ref: /schemas/display/tegra/nvidia,tegra20-vip.yaml
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Input from the VIP (parallel input capture) module
+
+patternProperties:
+ "^csi@[0-9a-f]+$":
+ type: object
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra20-vi
+ - nvidia,tegra30-vi
+ - nvidia,tegra114-vi
+ - nvidia,tegra124-vi
+ then:
+ required:
+ - resets
+ - reset-names
+ else:
+ required:
+ - power-domains
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ camera@48 {
+ compatible = "aptina,mt9v111";
+ reg = <0x48>;
+ clocks = <&camera_clk>;
+
+ port {
+ mt9v111_out: endpoint {
+ remote-endpoint = <&vi_vip_in>;
+ };
+ };
+ };
+ };
+
+ vi@54080000 {
+ compatible = "nvidia,tegra20-vi";
+ reg = <0x54080000 0x00040000>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_VI>;
+ resets = <&tegra_car 100>;
+ reset-names = "vi";
+
+ vip {
+ compatible = "nvidia,tegra20-vip";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ vi_vip_in: endpoint {
+ remote-endpoint = <&mt9v111_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ vi_vip_out: endpoint {
+ remote-endpoint = <&vi_in>;
+ };
+ };
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ vi_in: endpoint {
+ remote-endpoint = <&vi_vip_out>;
+ };
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ vi@54080000 {
+ compatible = "nvidia,tegra210-vi";
+ reg = <0x54080000 0x00000700>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+ clocks = <&tegra_car TEGRA210_CLK_VI>;
+ power-domains = <&pd_venc>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x0 0x54080000 0x2000>;
+
+ csi@838 {
+ compatible = "nvidia,tegra210-csi";
+ reg = <0x838 0x1300>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+ <&tegra_car TEGRA210_CLK_CILCD>,
+ <&tegra_car TEGRA210_CLK_CILE>,
+ <&tegra_car TEGRA210_CLK_CSI_TPG>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+ <&tegra_car TEGRA210_CLK_PLL_P>,
+ <&tegra_car TEGRA210_CLK_PLL_P>;
+ assigned-clock-rates = <102000000>,
+ <102000000>,
+ <102000000>,
+ <972000000>;
+
+ clocks = <&tegra_car TEGRA210_CLK_CSI>,
+ <&tegra_car TEGRA210_CLK_CILAB>,
+ <&tegra_car TEGRA210_CLK_CILCD>,
+ <&tegra_car TEGRA210_CLK_CILE>,
+ <&tegra_car TEGRA210_CLK_CSI_TPG>;
+ clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+ power-domains = <&pd_sor>;
+ };
+ };
diff --git a/Bindings/display/tegra/nvidia,tegra20-vip.yaml b/Bindings/display/tegra/nvidia,tegra20-vip.yaml
new file mode 100644
index 0000000..14294ed
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra20-vip.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra VIP (parallel video capture) controller
+
+maintainers:
+ - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra20-vip
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port receiving the video stream from the sensor
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port sending the video stream to the VI
+
+ required:
+ - port@0
+ - port@1
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - ports
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Bindings/display/tegra/nvidia,tegra210-csi.yaml b/Bindings/display/tegra/nvidia,tegra210-csi.yaml
new file mode 100644
index 0000000..fa07a40
--- /dev/null
+++ b/Bindings/display/tegra/nvidia,tegra210-csi.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra210-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CSI controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ $nodename:
+ pattern: "^csi@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - nvidia,tegra210-csi
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: module clock
+ - description: A/B lanes clock
+ - description: C/D lanes clock
+ - description: E lane clock
+ - description: test pattern generator clock
+
+ clock-names:
+ items:
+ - const: csi
+ - const: cilab
+ - const: cilcd
+ - const: cile
+ - const: csi_tpg
+
+ power-domains:
+ maxItems: 1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - power-domains
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Bindings/display/ti/ti,am65x-dss.yaml b/Bindings/display/ti/ti,am65x-dss.yaml
new file mode 100644
index 0000000..ae09cd3
--- /dev/null
+++ b/Bindings/display/ti/ti,am65x-dss.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AM65x Display Subsystem
+
+maintainers:
+ - Jyri Sarha <jsarha@ti.com>
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+description: |
+ The AM625 and AM65x TI Keystone Display SubSystem with two output
+ ports and two video planes. In AM65x DSS, the first video port
+ supports 1 OLDI TX and in AM625 DSS, the first video port output is
+ internally routed to 2 OLDI TXes. The second video port supports DPI
+ format. The first plane is full video plane with all features and the
+ second is a "lite plane" without scaling support.
+
+properties:
+ compatible:
+ enum:
+ - ti,am625-dss
+ - ti,am65x-dss
+
+ reg:
+ description:
+ Addresses to each DSS memory region described in the SoC's TRM.
+ items:
+ - description: common DSS register area
+ - description: VIDL1 light video plane
+ - description: VID video plane
+ - description: OVR1 overlay manager for vp1
+ - description: OVR2 overlay manager for vp2
+ - description: VP1 video port 1
+ - description: VP2 video port 2
+
+ reg-names:
+ items:
+ - const: common
+ - const: vidl1
+ - const: vid
+ - const: ovr1
+ - const: ovr2
+ - const: vp1
+ - const: vp2
+
+ clocks:
+ items:
+ - description: fck DSS functional clock
+ - description: vp1 Video Port 1 pixel clock
+ - description: vp2 Video Port 2 pixel clock
+
+ clock-names:
+ items:
+ - const: fck
+ - const: vp1
+ - const: vp2
+
+ assigned-clocks:
+ minItems: 1
+ maxItems: 3
+
+ assigned-clock-parents:
+ minItems: 1
+ maxItems: 3
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+ description: phandle to the associated power domain
+
+ dma-coherent:
+ type: boolean
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ For AM65x DSS, the OLDI output port node from video port 1.
+ For AM625 DSS, the internal DPI output port node from video
+ port 1.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The DSS DPI output port node from video port 2
+
+ ti,am65x-oldi-io-ctrl:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle to syscon device node mapping OLDI IO_CTRL registers.
+ The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
+ following OLDI_DAT1_IO_CTRL, OLDI_DAT2_IO_CTRL, OLDI_DAT3_IO_CTRL,
+ and OLDI_CLK_IO_CTRL registers. This property is needed for OLDI
+ interface to work.
+
+ max-memory-bandwidth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Input memory (from main memory to dispc) bandwidth limit in
+ bytes per second
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ dss: dss@4a00000 {
+ compatible = "ti,am65x-dss";
+ reg = <0x04a00000 0x1000>, /* common */
+ <0x04a02000 0x1000>, /* vidl1 */
+ <0x04a06000 0x1000>, /* vid */
+ <0x04a07000 0x1000>, /* ovr1 */
+ <0x04a08000 0x1000>, /* ovr2 */
+ <0x04a0a000 0x1000>, /* vp1 */
+ <0x04a0b000 0x1000>; /* vp2 */
+ reg-names = "common", "vidl1", "vid",
+ "ovr1", "ovr2", "vp1", "vp2";
+ ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+ power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 67 1>,
+ <&k3_clks 216 1>,
+ <&k3_clks 67 2>;
+ clock-names = "fck", "vp1", "vp2";
+ interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ oldi_out0: endpoint {
+ remote-endpoint = <&lcd_in0>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/ti/ti,dra7-dss.txt b/Bindings/display/ti/ti,dra7-dss.txt
new file mode 100644
index 0000000..91279f1
--- /dev/null
+++ b/Bindings/display/ti/ti,dra7-dss.txt
@@ -0,0 +1,74 @@
+Texas Instruments DRA7x Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,dra7-dss"
+- reg: address and length of the register spaces for 'dss'
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+- syscon: phandle to control module core syscon node
+
+Optional properties:
+
+Some DRA7xx SoCs have one dedicated video PLL, some have two. These properties
+can be used to describe the video PLLs:
+
+- reg: address and length of the register spaces for 'pll1_clkctrl',
+ 'pll1', 'pll2_clkctrl', 'pll2'
+- clocks: handle to video1 pll clock and video2 pll clock
+- clock-names: "video1_clk" and "video2_clk"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,dra7-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+ in bytes per second
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,dra7-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+ 'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+ D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Bindings/display/ti/ti,j721e-dss.yaml b/Bindings/display/ti/ti,j721e-dss.yaml
new file mode 100644
index 0000000..fad7cba
--- /dev/null
+++ b/Bindings/display/ti/ti,j721e-dss.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments J721E Display Subsystem
+
+maintainers:
+ - Jyri Sarha <jsarha@ti.com>
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+description: |
+ The J721E TI Keystone Display SubSystem with four output ports and
+ four video planes. There is two full video planes and two "lite
+ planes" without scaling support. The video ports can be connected to
+ the SoC's DPI pins or to integrated display bridges on the SoC.
+
+properties:
+ compatible:
+ const: ti,j721e-dss
+
+ reg:
+ items:
+ - description: common_m DSS Master common
+ - description: common_s0 DSS Shared common 0
+ - description: common_s1 DSS Shared common 1
+ - description: common_s2 DSS Shared common 2
+ - description: VIDL1 light video plane 1
+ - description: VIDL2 light video plane 2
+ - description: VID1 video plane 1
+ - description: VID1 video plane 2
+ - description: OVR1 overlay manager for vp1
+ - description: OVR2 overlay manager for vp2
+ - description: OVR3 overlay manager for vp3
+ - description: OVR4 overlay manager for vp4
+ - description: VP1 video port 1
+ - description: VP2 video port 2
+ - description: VP3 video port 3
+ - description: VP4 video port 4
+ - description: WB Write Back
+
+ reg-names:
+ items:
+ - const: common_m
+ - const: common_s0
+ - const: common_s1
+ - const: common_s2
+ - const: vidl1
+ - const: vidl2
+ - const: vid1
+ - const: vid2
+ - const: ovr1
+ - const: ovr2
+ - const: ovr3
+ - const: ovr4
+ - const: vp1
+ - const: vp2
+ - const: vp3
+ - const: vp4
+ - const: wb
+
+ clocks:
+ items:
+ - description: fck DSS functional clock
+ - description: vp1 Video Port 1 pixel clock
+ - description: vp2 Video Port 2 pixel clock
+ - description: vp3 Video Port 3 pixel clock
+ - description: vp4 Video Port 4 pixel clock
+
+ clock-names:
+ items:
+ - const: fck
+ - const: vp1
+ - const: vp2
+ - const: vp3
+ - const: vp4
+
+ assigned-clocks:
+ minItems: 1
+ maxItems: 5
+
+ assigned-clock-parents:
+ minItems: 1
+ maxItems: 5
+
+ interrupts:
+ items:
+ - description: common_m DSS Master common
+ - description: common_s0 DSS Shared common 0
+ - description: common_s1 DSS Shared common 1
+ - description: common_s2 DSS Shared common 2
+
+ interrupt-names:
+ items:
+ - const: common_m
+ - const: common_s0
+ - const: common_s1
+ - const: common_s2
+
+ power-domains:
+ maxItems: 1
+ description: phandle to the associated power domain
+
+ dma-coherent:
+ type: boolean
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The output port node form video port 1
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The output port node from video port 2
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The output port node from video port 3
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The output port node from video port 4
+
+ max-memory-bandwidth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Input memory (from main memory to dispc) bandwidth limit in
+ bytes per second
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ dss: dss@4a00000 {
+ compatible = "ti,j721e-dss";
+ reg = <0x04a00000 0x10000>, /* common_m */
+ <0x04a10000 0x10000>, /* common_s0*/
+ <0x04b00000 0x10000>, /* common_s1*/
+ <0x04b10000 0x10000>, /* common_s2*/
+ <0x04a20000 0x10000>, /* vidl1 */
+ <0x04a30000 0x10000>, /* vidl2 */
+ <0x04a50000 0x10000>, /* vid1 */
+ <0x04a60000 0x10000>, /* vid2 */
+ <0x04a70000 0x10000>, /* ovr1 */
+ <0x04a90000 0x10000>, /* ovr2 */
+ <0x04ab0000 0x10000>, /* ovr3 */
+ <0x04ad0000 0x10000>, /* ovr4 */
+ <0x04a80000 0x10000>, /* vp1 */
+ <0x04aa0000 0x10000>, /* vp2 */
+ <0x04ac0000 0x10000>, /* vp3 */
+ <0x04ae0000 0x10000>, /* vp4 */
+ <0x04af0000 0x10000>; /* wb */
+ reg-names = "common_m", "common_s0",
+ "common_s1", "common_s2",
+ "vidl1", "vidl2","vid1","vid2",
+ "ovr1", "ovr2", "ovr3", "ovr4",
+ "vp1", "vp2", "vp3", "vp4",
+ "wb";
+ clocks = <&k3_clks 152 0>,
+ <&k3_clks 152 1>,
+ <&k3_clks 152 4>,
+ <&k3_clks 152 9>,
+ <&k3_clks 152 13>;
+ clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
+ power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "common_m",
+ "common_s0",
+ "common_s1",
+ "common_s2";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+
+ dpi_out_0: endpoint {
+ remote-endpoint = <&dp_bridge_input>;
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/ti/ti,k2g-dss.yaml b/Bindings/display/ti/ti,k2g-dss.yaml
new file mode 100644
index 0000000..96b1439
--- /dev/null
+++ b/Bindings/display/ti/ti,k2g-dss.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K2G Display Subsystem
+
+maintainers:
+ - Jyri Sarha <jsarha@ti.com>
+ - Tomi Valkeinen <tomi.valkeinen@ti.com>
+
+description: |
+ The K2G DSS is an ultra-light version of TI Keystone Display
+ SubSystem. It has only one output port and video plane. The
+ output is DPI.
+
+properties:
+ compatible:
+ const: ti,k2g-dss
+
+ reg:
+ items:
+ - description: cfg DSS top level
+ - description: common DISPC common
+ - description: VID1 video plane 1
+ - description: OVR1 overlay manager for vp1
+ - description: VP1 video port 1
+
+ reg-names:
+ items:
+ - const: cfg
+ - const: common
+ - const: vid1
+ - const: ovr1
+ - const: vp1
+
+ clocks:
+ items:
+ - description: fck DSS functional clock
+ - description: vp1 Video Port 1 pixel clock
+
+ clock-names:
+ items:
+ - const: fck
+ - const: vp1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+ description: phandle to the associated power domain
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The DSS DPI output port node
+
+ max-memory-bandwidth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Input memory (from main memory to dispc) bandwidth limit in
+ bytes per second
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ dss: dss@2540000 {
+ compatible = "ti,k2g-dss";
+ reg = <0x02540000 0x400>,
+ <0x02550000 0x1000>,
+ <0x02557000 0x1000>,
+ <0x0255a800 0x100>,
+ <0x0255ac00 0x100>;
+ reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
+ clocks = <&k2g_clks 0x2 0>,
+ <&k2g_clks 0x2 1>;
+ clock-names = "fck", "vp1";
+ interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&k2g_pds 0x2>;
+
+ max-memory-bandwidth = <230000000>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&sii9022_in>;
+ };
+ };
+ };
diff --git a/Bindings/display/ti/ti,omap-dss.txt b/Bindings/display/ti/ti,omap-dss.txt
new file mode 100644
index 0000000..e1ef295
--- /dev/null
+++ b/Bindings/display/ti/ti,omap-dss.txt
@@ -0,0 +1,211 @@
+Texas Instruments OMAP Display Subsystem
+========================================
+
+Generic Description
+-------------------
+
+This document is a generic description of the OMAP Display Subsystem bindings.
+Binding details for each OMAP SoC version are described in respective binding
+documentation.
+
+The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and
+a number of encoder modules. All DSS versions contain DSS Core and DISPC, but
+the encoder modules vary.
+
+The DSS Core is the parent of the other DSS modules, and manages clock routing,
+integration to the SoC, etc.
+
+DISPC is the display controller, which reads pixels from the memory and outputs
+a RGB pixel stream to encoders.
+
+The encoder modules encode the received RGB pixel stream to a video output like
+HDMI, MIPI DPI, etc.
+
+Video Ports
+-----------
+
+The DSS Core and the encoders have video port outputs. The structure of the
+video ports is described in Documentation/devicetree/bindings/graph.txt,
+and the properties for the ports and endpoints for each encoder are
+described in the SoC's DSS binding documentation.
+
+The video ports are used to describe the connections to external hardware, like
+panels or external encoders.
+
+Aliases
+-------
+
+The board dts file may define aliases for displays to assign "displayX" style
+name for each display. If no aliases are defined, a semi-random number is used
+for the display.
+
+Example
+-------
+
+A shortened example of the DSS description for OMAP4, with non-relevant parts
+removed, defined in omap4.dtsi:
+
+dss: dss@58000000 {
+ compatible = "ti,omap4-dss";
+ reg = <0x58000000 0x80>;
+ status = "disabled";
+ ti,hwmods = "dss_core";
+ clocks = <&dss_dss_clk>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dispc@58001000 {
+ compatible = "ti,omap4-dispc";
+ reg = <0x58001000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dss_dispc";
+ clocks = <&dss_dss_clk>;
+ clock-names = "fck";
+ };
+
+ hdmi: encoder@58006000 {
+ compatible = "ti,omap4-hdmi";
+ reg = <0x58006000 0x200>,
+ <0x58006200 0x100>,
+ <0x58006300 0x100>,
+ <0x58006400 0x1000>;
+ reg-names = "wp", "pll", "phy", "core";
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ ti,hwmods = "dss_hdmi";
+ clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+ clock-names = "fck", "sys_clk";
+ };
+};
+
+A shortened example of the board description for OMAP4 Panda board, defined in
+omap4-panda.dts.
+
+The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
+chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
+shifter). The video pipelines for the connectors are formed as follows:
+
+DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
+OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector
+
+/ {
+ aliases {
+ display0 = &dvi0;
+ display1 = &hdmi0;
+ };
+
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* 0, power-down */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tfp410_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder@1 {
+ compatible = "ti,tpd12s015";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpd12s015_pins>;
+
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
+ <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
+ <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+
+ hdmi0: connector@1 {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+&hdmi {
+ status = "ok";
+ vdda-supply = <&vdac>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
diff --git a/Bindings/display/ti/ti,omap2-dss.txt b/Bindings/display/ti/ti,omap2-dss.txt
new file mode 100644
index 0000000..ee867c4
--- /dev/null
+++ b/Bindings/display/ti/ti,omap2-dss.txt
@@ -0,0 +1,58 @@
+Texas Instruments OMAP2 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap2-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+
+Optional nodes:
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap2-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+ in bytes per second
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap2-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap2-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+
+VENC Endpoint required properties:
+
+Required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
diff --git a/Bindings/display/ti/ti,omap3-dss.txt b/Bindings/display/ti/ti,omap3-dss.txt
new file mode 100644
index 0000000..cd02516
--- /dev/null
+++ b/Bindings/display/ti/ti,omap3-dss.txt
@@ -0,0 +1,87 @@
+Texas Instruments OMAP3 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap3-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video ports:
+ - Port 0: DPI output
+ - Port 1: SDI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+SDI Endpoint required properties:
+- datapairs: number of datapairs used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap3-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+ in bytes per second
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap3-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap3-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap3-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+ DATA1+, DATA1-, ...
diff --git a/Bindings/display/ti/ti,omap4-dss.txt b/Bindings/display/ti/ti,omap4-dss.txt
new file mode 100644
index 0000000..0f85f6b
--- /dev/null
+++ b/Bindings/display/ti/ti,omap4-dss.txt
@@ -0,0 +1,119 @@
+Texas Instruments OMAP4 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap4-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, VENC, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap4-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+ in bytes per second
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap4-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+VENC
+----
+
+Required properties:
+- compatible: "ti,omap4-venc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_venc"
+- vdda-supply: power supply for DAC
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional nodes:
+- Video port for VENC output
+
+VENC Endpoint required properties:
+- ti,invert-polarity: invert the polarity of the video signal
+- ti,channels: 1 for composite, 2 for s-video
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap4-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+ DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap4-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+ 'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+ D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Bindings/display/ti/ti,omap5-dss.txt b/Bindings/display/ti/ti,omap5-dss.txt
new file mode 100644
index 0000000..2086121
--- /dev/null
+++ b/Bindings/display/ti/ti,omap5-dss.txt
@@ -0,0 +1,100 @@
+Texas Instruments OMAP5 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap5-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap5-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Optional properties:
+- max-memory-bandwidth: Input memory (from main memory to dispc) bandwidth limit
+ in bytes per second
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap5-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap5-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+ DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap5-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+ 'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+ D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Bindings/display/ti/ti,opa362.txt b/Bindings/display/ti/ti,opa362.txt
new file mode 100644
index 0000000..f96083c
--- /dev/null
+++ b/Bindings/display/ti/ti,opa362.txt
@@ -0,0 +1,38 @@
+OPA362 analog video amplifier
+
+Required properties:
+- compatible: "ti,opa362"
+- enable-gpios: enable/disable output gpio
+
+Required node:
+- Video port 0 for opa362 input
+- Video port 1 for opa362 output
+
+Example:
+
+tv_amp: opa362 {
+ compatible = "ti,opa362";
+ enable-gpios = <&gpio1 23 0>; /* GPIO to enable video out amplifier */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ opa_in: endpoint@0 {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ opa_out: endpoint@0 {
+ remote-endpoint = <&tv_connector_in>;
+ };
+ };
+ };
+};
+
+
+
diff --git a/Bindings/display/ti/ti,tpd12s015.txt b/Bindings/display/ti/ti,tpd12s015.txt
new file mode 100644
index 0000000..26e6d32
--- /dev/null
+++ b/Bindings/display/ti/ti,tpd12s015.txt
@@ -0,0 +1,44 @@
+TPD12S015 HDMI level shifter and ESD protection chip
+====================================================
+
+Required properties:
+- compatible: "ti,tpd12s015"
+
+Optional properties:
+- gpios: CT CP HPD, LS OE and HPD gpios
+
+Required nodes:
+- Video port 0 for HDMI input
+- Video port 1 for HDMI output
+
+Example
+-------
+
+tpd12s015: encoder@1 {
+ compatible = "ti,tpd12s015";
+
+ gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
+ <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
+ <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint@0 {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint@0 {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
diff --git a/Bindings/display/tilcdc/panel.txt b/Bindings/display/tilcdc/panel.txt
new file mode 100644
index 0000000..8082163
--- /dev/null
+++ b/Bindings/display/tilcdc/panel.txt
@@ -0,0 +1,66 @@
+Device-Tree bindings for tilcdc DRM generic panel output driver
+
+Required properties:
+ - compatible: value should be "ti,tilcdc,panel".
+ - panel-info: configuration info to configure LCDC correctly for the panel
+ - ac-bias: AC Bias Pin Frequency
+ - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt
+ - dma-burst-sz: DMA burst size
+ - bpp: Bits per pixel
+ - fdd: FIFO DMA Request Delay
+ - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling
+ - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore
+ - raster-order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most
+ - fifo-th: DMA FIFO threshold
+ - display-timings: typical videomode of lcd panel. Multiple video modes
+ can be listed if the panel supports multiple timings, but the 'native-mode'
+ should be the preferred/default resolution. Refer to
+ Documentation/devicetree/bindings/display/panel/display-timing.txt for display
+ timing binding details.
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+- enable-gpios: GPIO pin to enable or disable the panel
+
+Recommended properties:
+ - pinctrl-names, pinctrl-0: the pincontrol settings to configure
+ muxing properly for pins that connect to TFP410 device
+
+Example:
+
+ /* Settings for CDTech_S035Q01 / LCD3 cape: */
+ lcd3 {
+ compatible = "ti,tilcdc,panel";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bone_lcd3_cape_lcd_pins>;
+ backlight = <&backlight>;
+ enable-gpios = <&gpio3 19 0>;
+
+ panel-info {
+ ac-bias = <255>;
+ ac-bias-intrpt = <0>;
+ dma-burst-sz = <16>;
+ bpp = <16>;
+ fdd = <0x80>;
+ sync-edge = <0>;
+ sync-ctrl = <1>;
+ raster-order = <0>;
+ fifo-th = <0>;
+ };
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 320x240 {
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <21>;
+ hfront-porch = <58>;
+ hsync-len = <47>;
+ vback-porch = <11>;
+ vfront-porch = <23>;
+ vsync-len = <2>;
+ clock-frequency = <8000000>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
diff --git a/Bindings/display/tilcdc/tilcdc.txt b/Bindings/display/tilcdc/tilcdc.txt
new file mode 100644
index 0000000..3b3d0bb
--- /dev/null
+++ b/Bindings/display/tilcdc/tilcdc.txt
@@ -0,0 +1,82 @@
+Device-Tree bindings for tilcdc DRM driver
+
+Required properties:
+ - compatible: value should be one of the following:
+ - "ti,am33xx-tilcdc" for AM335x based boards
+ - "ti,da850-tilcdc" for DA850/AM18x/OMAP-L138 based boards
+ - interrupts: the interrupt number
+ - reg: base address and size of the LCDC device
+
+Recommended properties:
+ - ti,hwmods: Name of the hwmod associated to the LCDC
+
+Optional properties:
+ - max-bandwidth: The maximum pixels per second that the memory
+ interface / lcd controller combination can sustain
+ - max-width: The maximum horizontal pixel width supported by
+ the lcd controller.
+ - max-pixelclock: The maximum pixel clock that can be supported
+ by the lcd controller in KHz.
+ - blue-and-red-wiring: Recognized values "straight" or "crossed".
+ This property deals with the LCDC revision 2 (found on AM335x)
+ color errata [1].
+ - "straight" indicates normal wiring that supports RGB565,
+ BGR888, and XBGR8888 color formats.
+ - "crossed" indicates wiring that has blue and red wires
+ crossed. This setup supports BGR565, RGB888 and XRGB8888
+ formats.
+ - If the property is not present or its value is not recognized
+ the legacy mode is assumed. This configuration supports RGB565,
+ RGB888 and XRGB8888 formats. However, depending on wiring, the red
+ and blue colors are swapped in either 16 or 24-bit color modes.
+
+Optional nodes:
+
+ - port/ports: to describe a connection to an external encoder. The
+ binding follows Documentation/devicetree/bindings/graph.txt and
+ supports a single port with a single endpoint.
+
+ - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
+ Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml for connecting
+ tfp410 DVI encoder or lcd panel to lcdc
+
+[1] There is an errata about AM335x color wiring. For 16-bit color mode
+ the wires work as they should (LCD_DATA[0:4] is for Blue[3:7]),
+ but for 24 bit color modes the wiring of blue and red components is
+ crossed and LCD_DATA[0:4] is for Red[3:7] and LCD_DATA[11:15] is
+ for Blue[3-7]. For more details see section 3.1.1 in AM335x
+ Silicon Errata:
+ https://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=sprz360
+
+Example:
+
+ fb: fb@4830e000 {
+ compatible = "ti,am33xx-tilcdc", "ti,da850-tilcdc";
+ reg = <0x4830e000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+ ti,hwmods = "lcdc";
+
+ blue-and-red-wiring = "crossed";
+
+ port {
+ lcdc_0: endpoint {
+ remote-endpoint = <&hdmi_0>;
+ };
+ };
+ };
+
+ tda19988: tda19988 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+
+ pinctrl-names = "default", "off";
+ pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+ pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+ port {
+ hdmi_0: endpoint {
+ remote-endpoint = <&lcdc_0>;
+ };
+ };
+ };
diff --git a/Bindings/display/truly,nt35597.txt b/Bindings/display/truly,nt35597.txt
new file mode 100644
index 0000000..f39c77e
--- /dev/null
+++ b/Bindings/display/truly,nt35597.txt
@@ -0,0 +1,59 @@
+Truly model NT35597 DSI display driver
+
+The Truly NT35597 is a generic display driver, currently only configured
+for use in the 2K display on the Qualcomm SDM845 MTP board.
+
+Required properties:
+- compatible: should be "truly,nt35597-2K-display"
+- vdda-supply: phandle of the regulator that provides the supply voltage
+ Power IC supply
+- vdispp-supply: phandle of the regulator that provides the supply voltage
+ for positive LCD bias
+- vdispn-supply: phandle of the regulator that provides the supply voltage
+ for negative LCD bias
+- reset-gpios: phandle of gpio for reset line
+ This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
+ (active low)
+- mode-gpios: phandle of the gpio for choosing the mode of the display
+ for single DSI or Dual DSI
+ This should be low for dual DSI and high for single DSI mode
+- ports: This device has two video ports driven by two DSIs. Their connections
+ are modeled using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt.
+ - port@0: DSI input port driven by master DSI
+ - port@1: DSI input port driven by secondary DSI
+
+Example:
+
+ dsi@ae94000 {
+ panel@0 {
+ compatible = "truly,nt35597-2K-display";
+ reg = <0>;
+ vdda-supply = <&pm8998_l14>;
+ vdispp-supply = <&lab_regulator>;
+ vdispn-supply = <&ibb_regulator>;
+ pinctrl-names = "default", "suspend";
+ pinctrl-0 = <&dpu_dsi_active>;
+ pinctrl-1 = <&dpu_dsi_suspend>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+ mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ panel1_in: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+ };
+ };
+ };
diff --git a/Bindings/display/via,vt8500-fb.txt b/Bindings/display/via,vt8500-fb.txt
new file mode 100644
index 0000000..2871e21
--- /dev/null
+++ b/Bindings/display/via,vt8500-fb.txt
@@ -0,0 +1,36 @@
+VIA VT8500 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "via,vt8500-fb"
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : framebuffer controller interrupt
+- bits-per-pixel : bit depth of framebuffer (16 or 32)
+
+Required subnodes:
+- display-timings: see display-timing.txt for information
+
+Example:
+
+ fb@d8050800 {
+ compatible = "via,vt8500-fb";
+ reg = <0xd800e400 0x400>;
+ interrupts = <12>;
+ bits-per-pixel = <16>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 800x480 {
+ clock-frequency = <0>; /* unused but required */
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <88>;
+ hsync-len = <0>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <1>;
+ };
+ };
+ };
+
diff --git a/Bindings/display/wm,prizm-ge-rops.txt b/Bindings/display/wm,prizm-ge-rops.txt
new file mode 100644
index 0000000..a850fa0
--- /dev/null
+++ b/Bindings/display/wm,prizm-ge-rops.txt
@@ -0,0 +1,13 @@
+VIA/Wondermedia Graphics Engine Controller
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,prizm-ge-rops"
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+
+ ge_rops@d8050400 {
+ compatible = "wm,prizm-ge-rops";
+ reg = <0xd8050400 0x100>;
+ };
diff --git a/Bindings/display/wm,wm8505-fb.txt b/Bindings/display/wm,wm8505-fb.txt
new file mode 100644
index 0000000..0bcadb2
--- /dev/null
+++ b/Bindings/display/wm,wm8505-fb.txt
@@ -0,0 +1,33 @@
+Wondermedia WM8505 Framebuffer
+-----------------------------------------------------
+
+Required properties:
+- compatible : "wm,wm8505-fb"
+- reg : Should contain 1 register ranges(address and length)
+- bits-per-pixel : bit depth of framebuffer (16 or 32)
+
+Required subnodes:
+- display-timings: see display-timing.txt for information
+
+Example:
+
+ fb@d8051700 {
+ compatible = "wm,wm8505-fb";
+ reg = <0xd8051700 0x200>;
+ bits-per-pixel = <16>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: 800x480 {
+ clock-frequency = <0>; /* unused but required */
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <88>;
+ hsync-len = <0>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ vsync-len = <1>;
+ };
+ };
+ };
diff --git a/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
new file mode 100644
index 0000000..554f9d5
--- /dev/null
+++ b/Bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/xlnx/xlnx,zynqmp-dpsub.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DisplayPort Subsystem
+
+description: |
+ The DisplayPort subsystem of Xilinx ZynqMP (Zynq UltraScale+ MPSoC)
+ implements the display and audio pipelines based on the DisplayPort v1.2
+ standard. The subsystem includes multiple functional blocks as below:
+
+ +------------------------------------------------------------+
+ +--------+ | +----------------+ +-----------+ |
+ | DPDMA | --->| | --> | Video | Video +-------------+ |
+ | 4x vid | | | | | Rendering | -+--> | | | +------+
+ | 2x aud | | | Audio/Video | --> | Pipeline | | | DisplayPort |---> | PHY0 |
+ +--------+ | | Buffer Manager | +-----------+ | | Source | | +------+
+ | | and STC | +-----------+ | | Controller | | +------+
+ Live Video --->| | --> | Audio | Audio | |---> | PHY1 |
+ | | | | Mixer | --+-> | | | +------+
+ Live Audio --->| | --> | | || +-------------+ |
+ | +----------------+ +-----------+ || |
+ +---------------------------------------||-------------------+
+ vv
+ Blended Video and
+ Mixed Audio to PL
+
+ The Buffer Manager interacts with external interface such as DMA engines or
+ live audio/video streams from the programmable logic. The Video Rendering
+ Pipeline blends the video and graphics layers and performs colorspace
+ conversion. The Audio Mixer mixes the incoming audio streams. The DisplayPort
+ Source Controller handles the DisplayPort protocol and connects to external
+ PHYs.
+
+ The subsystem supports 2 video and 2 audio streams, and various pixel formats
+ and depths up to 4K@30 resolution.
+
+ Please refer to "Zynq UltraScale+ Device Technical Reference Manual"
+ (https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf)
+ for more details.
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+properties:
+ compatible:
+ const: xlnx,zynqmp-dpsub-1.7
+
+ reg:
+ maxItems: 4
+ reg-names:
+ items:
+ - const: dp
+ - const: blend
+ - const: av_buf
+ - const: aud
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description:
+ The APB clock and at least one video clock are mandatory, the audio clock
+ is optional.
+ minItems: 2
+ items:
+ - description: dp_apb_clk is the APB clock
+ - description: dp_aud_clk is the Audio clock
+ - description:
+ dp_vtc_pixel_clk_in is the non-live video clock (from Processing
+ System)
+ - description:
+ dp_live_video_in_clk is the live video clock (from Programmable
+ Logic)
+ clock-names:
+ oneOf:
+ - minItems: 2
+ items:
+ - const: dp_apb_clk
+ - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+ - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+ - minItems: 3
+ items:
+ - const: dp_apb_clk
+ - const: dp_aud_clk
+ - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+ - enum: [ dp_vtc_pixel_clk_in, dp_live_video_in_clk ]
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: Video layer, plane 0 (RGB or luma)
+ - description: Video layer, plane 1 (U/V or U)
+ - description: Video layer, plane 2 (V)
+ - description: Graphics layer
+ dma-names:
+ items:
+ - const: vid0
+ - const: vid1
+ - const: vid2
+ - const: gfx0
+
+ phys:
+ description: PHYs for the DP data lanes
+ minItems: 1
+ maxItems: 2
+ phy-names:
+ minItems: 1
+ items:
+ - const: dp-phy0
+ - const: dp-phy1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Connections to the programmable logic and the DisplayPort PHYs. Each port
+ shall have a single endpoint.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The live video input from the programmable logic
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The live graphics input from the programmable logic
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The live audio input from the programmable logic
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The blended video output to the programmable logic
+
+ port@4:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The mixed audio output to the programmable logic
+
+ port@5:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The DisplayPort output
+
+ required:
+ - port@0
+ - port@1
+ - port@2
+ - port@3
+ - port@4
+ - port@5
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - resets
+ - dmas
+ - dma-names
+ - phys
+ - phy-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+
+ display@fd4a0000 {
+ compatible = "xlnx,zynqmp-dpsub-1.7";
+ reg = <0xfd4a0000 0x1000>,
+ <0xfd4aa000 0x1000>,
+ <0xfd4ab000 0x1000>,
+ <0xfd4ac000 0x1000>;
+ reg-names = "dp", "blend", "av_buf", "aud";
+ interrupts = <0 119 4>;
+ interrupt-parent = <&gic>;
+
+ clock-names = "dp_apb_clk", "dp_aud_clk", "dp_live_video_in_clk";
+ clocks = <&dp_aclk>, <&clkc 17>, <&si570_1>;
+
+ power-domains = <&pd_dp>;
+ resets = <&reset ZYNQMP_RESET_DP>;
+
+ dma-names = "vid0", "vid1", "vid2", "gfx0";
+ dmas = <&xlnx_dpdma 0>,
+ <&xlnx_dpdma 1>,
+ <&xlnx_dpdma 2>,
+ <&xlnx_dpdma 3>;
+
+ phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+ <&psgtr 0 PHY_TYPE_DP 1 3>;
+
+ phy-names = "dp-phy0", "dp-phy1";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+ port@1 {
+ reg = <1>;
+ };
+ port@2 {
+ reg = <2>;
+ };
+ port@3 {
+ reg = <3>;
+ };
+ port@4 {
+ reg = <4>;
+ };
+ port@5 {
+ reg = <5>;
+ dpsub_dp_out: endpoint {
+ remote-endpoint = <&dp_connector>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Bindings/display/xylon,logicvc-display.yaml b/Bindings/display/xylon,logicvc-display.yaml
new file mode 100644
index 0000000..76b804b
--- /dev/null
+++ b/Bindings/display/xylon,logicvc-display.yaml
@@ -0,0 +1,301 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Bootlin
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xylon LogiCVC display controller
+
+maintainers:
+ - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+description: |
+ The Xylon LogiCVC is a display controller that supports multiple layers.
+ It is usually implemented as programmable logic and was optimized for use
+ with Xilinx Zynq-7000 SoCs and Xilinx FPGAs.
+
+ Because the controller is intended for use in a FPGA, most of the
+ configuration of the controller takes place at logic configuration bitstream
+ synthesis time. As a result, many of the device-tree bindings are meant to
+ reflect the synthesis configuration and must not be configured differently.
+ Matching synthesis parameters are provided when applicable.
+
+ Layers are declared in the "layers" sub-node and have dedicated configuration.
+ In version 3 of the controller, each layer has fixed memory offset and address
+ starting from the video memory base address for its framebuffer. In version 4,
+ framebuffers are configured with a direct memory address instead.
+
+properties:
+ compatible:
+ enum:
+ - xylon,logicvc-3.02.a-display
+ - xylon,logicvc-4.01.a-display
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ minItems: 1
+ items:
+ # vclk is required and must be provided as first item.
+ - const: vclk
+ # Other clocks are optional and can be provided in any order.
+ - enum:
+ - vclk2
+ - lvdsclk
+ - lvdsclkn
+ - enum:
+ - vclk2
+ - lvdsclk
+ - lvdsclkn
+ - enum:
+ - vclk2
+ - lvdsclk
+ - lvdsclkn
+
+ interrupts:
+ maxItems: 1
+
+ memory-region:
+ maxItems: 1
+
+ xylon,display-interface:
+ enum:
+ # Parallel RGB interface (C_DISPLAY_INTERFACE == 0)
+ - parallel-rgb
+ # ITU-T BR656 interface (C_DISPLAY_INTERFACE == 1)
+ - bt656
+ # 4-bit LVDS interface (C_DISPLAY_INTERFACE == 2)
+ - lvds-4bits
+ # 3-bit LVDS interface (C_DISPLAY_INTERFACE == 4)
+ - lvds-3bits
+ # DVI interface (C_DISPLAY_INTERFACE == 5)
+ - dvi
+ description: Display output interface (C_DISPLAY_INTERFACE).
+
+ xylon,display-colorspace:
+ enum:
+ # RGB colorspace (C_DISPLAY_COLOR_SPACE == 0)
+ - rgb
+ # YUV 4:2:2 colorspace (C_DISPLAY_COLOR_SPACE == 1)
+ - yuv422
+ # YUV 4:4:4 colorspace (C_DISPLAY_COLOR_SPACE == 2)
+ - yuv444
+ description: Display output colorspace (C_DISPLAY_COLOR_SPACE).
+
+ xylon,display-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Display output depth (C_PIXEL_DATA_WIDTH).
+
+ xylon,row-stride:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
+
+ xylon,dithering:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Dithering module is enabled (C_XCOLOR)
+
+ xylon,background-layer:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ The last layer is used to display a black background (C_USE_BACKGROUND).
+ The layer must still be registered.
+
+ xylon,layers-configurable:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Configuration of layers' size, position and offset is enabled
+ (C_USE_SIZE_POSITION).
+
+ layers:
+ type: object
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^layer@[0-9]+$":
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+
+ xylon,layer-depth:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Layer depth (C_LAYER_X_DATA_WIDTH).
+
+ xylon,layer-colorspace:
+ enum:
+ # RGB colorspace (C_LAYER_X_TYPE == 0)
+ - rgb
+ # YUV packed colorspace (C_LAYER_X_TYPE == 0)
+ - yuv
+ description: Layer colorspace (C_LAYER_X_TYPE).
+
+ xylon,layer-alpha-mode:
+ enum:
+ # Alpha is configured layer-wide (C_LAYER_X_ALPHA_MODE == 0)
+ - layer
+ # Alpha is configured per-pixel (C_LAYER_X_ALPHA_MODE == 1)
+ - pixel
+ description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE).
+
+ xylon,layer-base-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in number of lines (C_LAYER_X_OFFSET) starting from the
+ video RAM base (C_VMEM_BASEADDR), only for version 3.
+
+ xylon,layer-buffer-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset in number of lines (C_BUFFER_*_OFFSET) starting from the
+ layer base offset for the second buffer used in double-buffering.
+
+ xylon,layer-primary:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Layer should be registered as a primary plane (exactly one is
+ required).
+
+ additionalProperties: false
+
+ required:
+ - reg
+ - xylon,layer-depth
+ - xylon,layer-colorspace
+ - xylon,layer-alpha-mode
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - layer@0
+
+ additionalProperties: false
+
+ description: |
+ The description of the display controller layers, containing layer
+ sub-nodes that each describe a registered layer.
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Video output port, typically connected to a panel or bridge.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - xylon,display-interface
+ - xylon,display-colorspace
+ - xylon,display-depth
+ - xylon,row-stride
+ - layers
+ - port
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ logicvc: logicvc@43c00000 {
+ compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
+ reg = <0x43c00000 0x6000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ logicvc_display: display@0 {
+ compatible = "xylon,logicvc-3.02.a-display";
+ reg = <0x0 0x6000>;
+
+ memory-region = <&logicvc_cma>;
+
+ clocks = <&logicvc_vclk 0>, <&logicvc_lvdsclk 0>;
+ clock-names = "vclk", "lvdsclk";
+
+ interrupt-parent = <&intc>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+
+ xylon,display-interface = "lvds-4bits";
+ xylon,display-colorspace = "rgb";
+ xylon,display-depth = <16>;
+ xylon,row-stride = <1024>;
+
+ xylon,layers-configurable;
+
+ layers {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ layer@0 {
+ reg = <0>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <0>;
+ xylon,layer-buffer-offset = <480>;
+ xylon,layer-primary;
+ };
+
+ layer@1 {
+ reg = <1>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <2400>;
+ xylon,layer-buffer-offset = <480>;
+ };
+
+ layer@2 {
+ reg = <2>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <960>;
+ xylon,layer-buffer-offset = <480>;
+ };
+
+ layer@3 {
+ reg = <3>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <480>;
+ xylon,layer-buffer-offset = <480>;
+ };
+
+ layer@4 {
+ reg = <4>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <8192>;
+ xylon,layer-buffer-offset = <480>;
+ };
+ };
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ logicvc_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+ };