Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/display/dsi-controller.yaml b/Bindings/display/dsi-controller.yaml
new file mode 100644
index 0000000..67ce103
--- /dev/null
+++ b/Bindings/display/dsi-controller.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/dsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for DSI Display Panels
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ This document defines device tree properties common to DSI, Display
+ Serial Interface controllers and attached panels. It doesn't constitute
+ a device tree binding specification by itself but is meant to be referenced
+ by device tree bindings.
+
+ When referenced from panel device tree bindings the properties defined in
+ this document are defined as follows. The panel device tree bindings are
+ responsible for defining whether each property is required or optional.
+
+ Notice: this binding concerns DSI panels connected directly to a master
+ without any intermediate port graph to the panel. Each DSI master
+ can control one to four virtual channels to one panel. Each virtual
+ channel should have a node "panel" for their virtual channel with their
+ reg-property set to the virtual channel number, usually there is just
+ one virtual channel, number 0.
+
+properties:
+ $nodename:
+ pattern: "^dsi(@.*)?$"
+
+ clock-master:
+ type: boolean
+ description:
+ Should be enabled if the host is being used in conjunction with
+ another DSI host to drive the same peripheral. Hardware supporting
+ such a configuration generally requires the data on both the busses
+ to be driven by the same clock. Only the DSI host instance
+ controlling this clock should contain this property.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^panel@[0-3]$":
+ description: Panels connected to the DSI link
+ type: object
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 3
+ description:
+ The virtual channel number of a DSI peripheral. Must be in the range
+ from 0 to 3, as DSI uses a 2-bit addressing scheme. Some DSI
+ peripherals respond to more than a single virtual channel. In that
+ case the reg property can take multiple entries, one for each virtual
+ channel that the peripheral responds to.
+
+ enforce-video-mode:
+ type: boolean
+ description:
+ The best option is usually to run a panel in command mode, as this
+ gives better control over the panel hardware. However for different
+ reasons like broken hardware, missing features or testing, it may be
+ useful to be able to force a command mode-capable panel into video
+ mode.
+
+ required:
+ - reg
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ dsi@a0351000 {
+ reg = <0xa0351000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel@0 {
+ compatible = "sony,acx424akp";
+ reg = <0>;
+ vddi-supply = <&ab8500_ldo_aux1_reg>;
+ reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+...