Squashed 'dts/upstream/' content from commit aaba2d45dc2a
git-subtree-dir: dts/upstream
git-subtree-split: aaba2d45dc2a1b3bbb710f2a3808ee1c9f340abe
diff --git a/Bindings/display/bridge/analogix,anx7625.yaml b/Bindings/display/bridge/analogix,anx7625.yaml
new file mode 100644
index 0000000..a1ed100
--- /dev/null
+++ b/Bindings/display/bridge/analogix,anx7625.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analogix Semiconductor, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
+
+maintainers:
+ - Xin Ji <xji@analogixsemi.com>
+
+description: |
+ The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
+ designed for portable devices.
+
+properties:
+ compatible:
+ const: analogix,anx7625
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: used for interrupt pin B8.
+ maxItems: 1
+
+ enable-gpios:
+ description: used for power on chip control, POWER_EN pin D2.
+ maxItems: 1
+
+ reset-gpios:
+ description: used for reset chip control, RESET_N pin B7.
+ maxItems: 1
+
+ vdd10-supply:
+ description: Regulator that provides the supply 1.0V power.
+
+ vdd18-supply:
+ description: Regulator that provides the supply 1.8V power.
+
+ vdd33-supply:
+ description: Regulator that provides the supply 3.3V power.
+
+ analogix,lane0-swing:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 1
+ maxItems: 20
+ description:
+ an array of swing register setting for DP tx lane0 PHY.
+ Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+ Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+ Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
+ [Swing control] setting.
+ Registers 0~9, bit 3:0 is [Boost control], these bits control
+ post cursor manual, increase the [Boost control] to increase
+ Pre-emphasis value.
+ Registers 0~9, bit 6:4 is [Swing control], these bits control
+ swing manual, increase [Swing control] setting to add Vp-p value
+ for each Swing, Pre.
+ Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+ Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+ Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
+ [R Termination control] setting.
+ Registers 10~19, bit 4:0 is [R select control], these bits are
+ compensation manual, increase it can enhance IO driven strength
+ and Vp-p.
+ Registers 10~19, bit 5:6 is [R termination control], these bits
+ adjust 50ohm impedance of DP tx termination. 00:55 ohm,
+ 01:50 ohm(default), 10:45 ohm, 11:40 ohm.
+
+ analogix,lane1-swing:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 1
+ maxItems: 20
+ description:
+ an array of swing register setting for DP tx lane1 PHY.
+ DP TX lane1 swing register setting same with lane0
+ swing, please refer lane0-swing property description.
+
+ analogix,audio-enable:
+ type: boolean
+ description: let the driver enable audio HDMI codec function or not.
+
+ aux-bus:
+ $ref: /schemas/display/dp-aux-bus.yaml#
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ MIPI DSI/DPI input.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ type: object
+ additionalProperties: false
+
+ properties:
+ remote-endpoint: true
+
+ bus-type:
+ enum: [7]
+ default: 1
+
+ data-lanes: true
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Video port for panel or connector.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vdd10-supply
+ - vdd18-supply
+ - vdd33-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ encoder@58 {
+ compatible = "analogix,anx7625";
+ reg = <0x58>;
+ enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+ vdd10-supply = <&pp1000_mipibrdg>;
+ vdd18-supply = <&pp1800_mipibrdg>;
+ vdd33-supply = <&pp3300_mipibrdg>;
+ analogix,audio-enable;
+ analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+ analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi2dp_bridge_in: port@0 {
+ reg = <0>;
+ anx7625_in: endpoint {
+ remote-endpoint = <&mipi_dsi>;
+ bus-type = <7>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+
+ mipi2dp_bridge_out: port@1 {
+ reg = <1>;
+ anx7625_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel {
+ compatible = "innolux,n125hce-gn1";
+ power-supply = <&pp3300_disp_x>;
+ backlight = <&backlight_lcd0>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&anx7625_out>;
+ };
+ };
+ };
+ };
+ };
+ };