| /* |
| * U-Boot command for OneNAND support |
| * |
| * Copyright (C) 2005-2008 Samsung Electronics |
| * Kyungmin Park <kyungmin.park@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <malloc.h> |
| |
| #include <linux/mtd/compat.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/onenand.h> |
| |
| #include <asm/io.h> |
| |
| static struct mtd_info *mtd; |
| |
| static loff_t next_ofs; |
| static loff_t skip_ofs; |
| |
| static inline int str2long(char *p, ulong *num) |
| { |
| char *endptr; |
| |
| *num = simple_strtoul(p, &endptr, 16); |
| return (*p != '\0' && *endptr == '\0') ? 1 : 0; |
| } |
| |
| static int arg_off_size(int argc, char * const argv[], ulong *off, size_t *size) |
| { |
| if (argc >= 1) { |
| if (!(str2long(argv[0], off))) { |
| printf("'%s' is not a number\n", argv[0]); |
| return -1; |
| } |
| } else { |
| *off = 0; |
| } |
| |
| if (argc >= 2) { |
| if (!(str2long(argv[1], (ulong *)size))) { |
| printf("'%s' is not a number\n", argv[1]); |
| return -1; |
| } |
| } else { |
| *size = mtd->size - *off; |
| } |
| |
| if ((*off + *size) > mtd->size) { |
| printf("total chip size (0x%llx) exceeded!\n", mtd->size); |
| return -1; |
| } |
| |
| if (*size == mtd->size) |
| puts("whole chip\n"); |
| else |
| printf("offset 0x%lx, size 0x%x\n", *off, *size); |
| |
| return 0; |
| } |
| |
| static int onenand_block_read(loff_t from, size_t len, |
| size_t *retlen, u_char *buf, int oob) |
| { |
| struct onenand_chip *this = mtd->priv; |
| int blocks = (int) len >> this->erase_shift; |
| int blocksize = (1 << this->erase_shift); |
| loff_t ofs = from; |
| struct mtd_oob_ops ops = { |
| .retlen = 0, |
| }; |
| int ret; |
| |
| if (oob) |
| ops.ooblen = blocksize; |
| else |
| ops.len = blocksize; |
| |
| while (blocks) { |
| ret = mtd->block_isbad(mtd, ofs); |
| if (ret) { |
| printk("Bad blocks %d at 0x%x\n", |
| (u32)(ofs >> this->erase_shift), (u32)ofs); |
| ofs += blocksize; |
| continue; |
| } |
| |
| if (oob) |
| ops.oobbuf = buf; |
| else |
| ops.datbuf = buf; |
| |
| ops.retlen = 0; |
| ret = mtd->read_oob(mtd, ofs, &ops); |
| if (ret) { |
| printk("Read failed 0x%x, %d\n", (u32)ofs, ret); |
| ofs += blocksize; |
| continue; |
| } |
| ofs += blocksize; |
| buf += blocksize; |
| blocks--; |
| *retlen += ops.retlen; |
| } |
| |
| return 0; |
| } |
| |
| static int onenand_block_write(loff_t to, size_t len, |
| size_t *retlen, const u_char * buf) |
| { |
| struct onenand_chip *this = mtd->priv; |
| int blocks = len >> this->erase_shift; |
| int blocksize = (1 << this->erase_shift); |
| loff_t ofs; |
| size_t _retlen = 0; |
| int ret; |
| |
| if (to == next_ofs) { |
| next_ofs = to + len; |
| to += skip_ofs; |
| } else { |
| next_ofs = to + len; |
| skip_ofs = 0; |
| } |
| ofs = to; |
| |
| while (blocks) { |
| ret = mtd->block_isbad(mtd, ofs); |
| if (ret) { |
| printk("Bad blocks %d at 0x%x\n", |
| (u32)(ofs >> this->erase_shift), (u32)ofs); |
| skip_ofs += blocksize; |
| goto next; |
| } |
| |
| ret = mtd->write(mtd, ofs, blocksize, &_retlen, buf); |
| if (ret) { |
| printk("Write failed 0x%x, %d", (u32)ofs, ret); |
| skip_ofs += blocksize; |
| goto next; |
| } |
| |
| buf += blocksize; |
| blocks--; |
| *retlen += _retlen; |
| next: |
| ofs += blocksize; |
| } |
| |
| return 0; |
| } |
| |
| static int onenand_block_erase(u32 start, u32 size, int force) |
| { |
| struct onenand_chip *this = mtd->priv; |
| struct erase_info instr = { |
| .callback = NULL, |
| }; |
| loff_t ofs; |
| int ret; |
| int blocksize = 1 << this->erase_shift; |
| |
| for (ofs = start; ofs < (start + size); ofs += blocksize) { |
| ret = mtd->block_isbad(mtd, ofs); |
| if (ret && !force) { |
| printf("Skip erase bad block %d at 0x%x\n", |
| (u32)(ofs >> this->erase_shift), (u32)ofs); |
| continue; |
| } |
| |
| instr.addr = ofs; |
| instr.len = blocksize; |
| instr.priv = force; |
| instr.mtd = mtd; |
| ret = mtd->erase(mtd, &instr); |
| if (ret) { |
| printf("erase failed block %d at 0x%x\n", |
| (u32)(ofs >> this->erase_shift), (u32)ofs); |
| continue; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int onenand_block_test(u32 start, u32 size) |
| { |
| struct onenand_chip *this = mtd->priv; |
| struct erase_info instr = { |
| .callback = NULL, |
| .priv = 0, |
| }; |
| |
| int blocks; |
| loff_t ofs; |
| int blocksize = 1 << this->erase_shift; |
| int start_block, end_block; |
| size_t retlen; |
| u_char *buf; |
| u_char *verify_buf; |
| int ret; |
| |
| buf = malloc(blocksize); |
| if (!buf) { |
| printf("Not enough malloc space available!\n"); |
| return -1; |
| } |
| |
| verify_buf = malloc(blocksize); |
| if (!verify_buf) { |
| printf("Not enough malloc space available!\n"); |
| return -1; |
| } |
| |
| start_block = start >> this->erase_shift; |
| end_block = (start + size) >> this->erase_shift; |
| |
| /* Protect boot-loader from badblock testing */ |
| if (start_block < 2) |
| start_block = 2; |
| |
| if (end_block > (mtd->size >> this->erase_shift)) |
| end_block = mtd->size >> this->erase_shift; |
| |
| blocks = start_block; |
| ofs = start; |
| while (blocks < end_block) { |
| printf("\rTesting block %d at 0x%x", (u32)(ofs >> this->erase_shift), (u32)ofs); |
| |
| ret = mtd->block_isbad(mtd, ofs); |
| if (ret) { |
| printf("Skip erase bad block %d at 0x%x\n", |
| (u32)(ofs >> this->erase_shift), (u32)ofs); |
| goto next; |
| } |
| |
| instr.addr = ofs; |
| instr.len = blocksize; |
| ret = mtd->erase(mtd, &instr); |
| if (ret) { |
| printk("Erase failed 0x%x, %d\n", (u32)ofs, ret); |
| goto next; |
| } |
| |
| ret = mtd->write(mtd, ofs, blocksize, &retlen, buf); |
| if (ret) { |
| printk("Write failed 0x%x, %d\n", (u32)ofs, ret); |
| goto next; |
| } |
| |
| ret = mtd->read(mtd, ofs, blocksize, &retlen, verify_buf); |
| if (ret) { |
| printk("Read failed 0x%x, %d\n", (u32)ofs, ret); |
| goto next; |
| } |
| |
| if (memcmp(buf, verify_buf, blocksize)) |
| printk("\nRead/Write test failed at 0x%x\n", (u32)ofs); |
| |
| next: |
| ofs += blocksize; |
| blocks++; |
| } |
| printf("...Done\n"); |
| |
| free(buf); |
| free(verify_buf); |
| |
| return 0; |
| } |
| |
| static int onenand_dump(struct mtd_info *mtd, ulong off, int only_oob) |
| { |
| int i; |
| u_char *datbuf, *oobbuf, *p; |
| struct mtd_oob_ops ops; |
| loff_t addr; |
| |
| datbuf = malloc(mtd->writesize + mtd->oobsize); |
| oobbuf = malloc(mtd->oobsize); |
| if (!datbuf || !oobbuf) { |
| puts("No memory for page buffer\n"); |
| return 1; |
| } |
| off &= ~(mtd->writesize - 1); |
| addr = (loff_t) off; |
| memset(&ops, 0, sizeof(ops)); |
| ops.datbuf = datbuf; |
| ops.oobbuf = oobbuf; |
| ops.len = mtd->writesize; |
| ops.ooblen = mtd->oobsize; |
| ops.retlen = 0; |
| i = mtd->read_oob(mtd, addr, &ops); |
| if (i < 0) { |
| printf("Error (%d) reading page %08lx\n", i, off); |
| free(datbuf); |
| free(oobbuf); |
| return 1; |
| } |
| printf("Page %08lx dump:\n", off); |
| i = mtd->writesize >> 4; |
| p = datbuf; |
| |
| while (i--) { |
| if (!only_oob) |
| printf("\t%02x %02x %02x %02x %02x %02x %02x %02x" |
| " %02x %02x %02x %02x %02x %02x %02x %02x\n", |
| p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7], |
| p[8], p[9], p[10], p[11], p[12], p[13], p[14], |
| p[15]); |
| p += 16; |
| } |
| puts("OOB:\n"); |
| i = mtd->oobsize >> 3; |
| p = oobbuf; |
| |
| while (i--) { |
| printf("\t%02x %02x %02x %02x %02x %02x %02x %02x\n", |
| p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]); |
| p += 8; |
| } |
| free(datbuf); |
| free(oobbuf); |
| |
| return 0; |
| } |
| |
| static int do_onenand_info(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| printf("%s\n", mtd->name); |
| return 0; |
| } |
| |
| static int do_onenand_bad(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| ulong ofs; |
| |
| mtd = &onenand_mtd; |
| /* Currently only one OneNAND device is supported */ |
| printf("\nDevice %d bad blocks:\n", 0); |
| for (ofs = 0; ofs < mtd->size; ofs += mtd->erasesize) { |
| if (mtd->block_isbad(mtd, ofs)) |
| printf(" %08x\n", (u32)ofs); |
| } |
| |
| return 0; |
| } |
| |
| static int do_onenand_read(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| char *s; |
| int oob = 0; |
| ulong addr, ofs; |
| size_t len; |
| int ret = 0; |
| size_t retlen = 0; |
| |
| if (argc < 3) |
| return cmd_usage(cmdtp); |
| |
| s = strchr(argv[0], '.'); |
| if ((s != NULL) && (!strcmp(s, ".oob"))) |
| oob = 1; |
| |
| addr = (ulong)simple_strtoul(argv[1], NULL, 16); |
| |
| printf("\nOneNAND read: "); |
| if (arg_off_size(argc - 2, argv + 2, &ofs, &len) != 0) |
| return 1; |
| |
| ret = onenand_block_read(ofs, len, &retlen, (u8 *)addr, oob); |
| |
| printf(" %d bytes read: %s\n", retlen, ret ? "ERROR" : "OK"); |
| |
| return ret == 0 ? 0 : 1; |
| } |
| |
| static int do_onenand_write(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| ulong addr, ofs; |
| size_t len; |
| int ret = 0; |
| size_t retlen = 0; |
| |
| if (argc < 3) |
| return cmd_usage(cmdtp); |
| |
| addr = (ulong)simple_strtoul(argv[1], NULL, 16); |
| |
| printf("\nOneNAND write: "); |
| if (arg_off_size(argc - 2, argv + 2, &ofs, &len) != 0) |
| return 1; |
| |
| ret = onenand_block_write(ofs, len, &retlen, (u8 *)addr); |
| |
| printf(" %d bytes written: %s\n", retlen, ret ? "ERROR" : "OK"); |
| |
| return ret == 0 ? 0 : 1; |
| } |
| |
| static int do_onenand_erase(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| ulong ofs; |
| int ret = 0; |
| size_t len; |
| int force; |
| |
| /* |
| * Syntax is: |
| * 0 1 2 3 4 |
| * onenand erase [force] [off size] |
| */ |
| argc--; |
| argv++; |
| if (argc) |
| { |
| if (!strcmp("force", argv[0])) |
| { |
| force = 1; |
| argc--; |
| argv++; |
| } |
| } |
| printf("\nOneNAND erase: "); |
| |
| /* skip first two or three arguments, look for offset and size */ |
| if (arg_off_size(argc, argv, &ofs, &len) != 0) |
| return 1; |
| |
| ret = onenand_block_erase(ofs, len, force); |
| |
| printf("%s\n", ret ? "ERROR" : "OK"); |
| |
| return ret == 0 ? 0 : 1; |
| } |
| |
| static int do_onenand_test(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| ulong ofs; |
| int ret = 0; |
| size_t len; |
| |
| /* |
| * Syntax is: |
| * 0 1 2 3 4 |
| * onenand test [force] [off size] |
| */ |
| |
| printf("\nOneNAND test: "); |
| |
| /* skip first two or three arguments, look for offset and size */ |
| if (arg_off_size(argc - 1, argv + 1, &ofs, &len) != 0) |
| return 1; |
| |
| ret = onenand_block_test(ofs, len); |
| |
| printf("%s\n", ret ? "ERROR" : "OK"); |
| |
| return ret == 0 ? 0 : 1; |
| } |
| |
| static int do_onenand_dump(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| ulong ofs; |
| int ret = 0; |
| char *s; |
| |
| if (argc < 2) |
| return cmd_usage(cmdtp); |
| |
| s = strchr(argv[0], '.'); |
| ofs = (int)simple_strtoul(argv[1], NULL, 16); |
| |
| if (s != NULL && strcmp(s, ".oob") == 0) |
| ret = onenand_dump(mtd, ofs, 1); |
| else |
| ret = onenand_dump(mtd, ofs, 0); |
| |
| return ret == 0 ? 1 : 0; |
| } |
| |
| static int do_onenand_markbad(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| int ret = 0; |
| ulong addr; |
| |
| argc -= 2; |
| argv += 2; |
| |
| if (argc <= 0) |
| return cmd_usage(cmdtp); |
| |
| while (argc > 0) { |
| addr = simple_strtoul(*argv, NULL, 16); |
| |
| if (mtd->block_markbad(mtd, addr)) { |
| printf("block 0x%08lx NOT marked " |
| "as bad! ERROR %d\n", |
| addr, ret); |
| ret = 1; |
| } else { |
| printf("block 0x%08lx successfully " |
| "marked as bad\n", |
| addr); |
| } |
| --argc; |
| ++argv; |
| } |
| return ret; |
| } |
| |
| static cmd_tbl_t cmd_onenand_sub[] = { |
| U_BOOT_CMD_MKENT(info, 1, 0, do_onenand_info, "", ""), |
| U_BOOT_CMD_MKENT(bad, 1, 0, do_onenand_bad, "", ""), |
| U_BOOT_CMD_MKENT(read, 4, 0, do_onenand_read, "", ""), |
| U_BOOT_CMD_MKENT(write, 4, 0, do_onenand_write, "", ""), |
| U_BOOT_CMD_MKENT(erase, 3, 0, do_onenand_erase, "", ""), |
| U_BOOT_CMD_MKENT(test, 3, 0, do_onenand_test, "", ""), |
| U_BOOT_CMD_MKENT(dump, 2, 0, do_onenand_dump, "", ""), |
| U_BOOT_CMD_MKENT(markbad, CONFIG_SYS_MAXARGS, 0, do_onenand_markbad, "", ""), |
| }; |
| |
| #ifdef CONFIG_NEEDS_MANUAL_RELOC |
| void onenand_reloc(void) { |
| fixup_cmdtable(cmd_onenand_sub, ARRAY_SIZE(cmd_onenand_sub)); |
| } |
| #endif |
| |
| static int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) |
| { |
| cmd_tbl_t *c; |
| |
| if (argc < 2) |
| return cmd_usage(cmdtp); |
| |
| mtd = &onenand_mtd; |
| |
| /* Strip off leading 'onenand' command argument */ |
| argc--; |
| argv++; |
| |
| c = find_cmd_tbl(argv[0], &cmd_onenand_sub[0], ARRAY_SIZE(cmd_onenand_sub)); |
| |
| if (c) |
| return c->cmd(cmdtp, flag, argc, argv); |
| else |
| return cmd_usage(cmdtp); |
| } |
| |
| U_BOOT_CMD( |
| onenand, CONFIG_SYS_MAXARGS, 1, do_onenand, |
| "OneNAND sub-system", |
| "info - show available OneNAND devices\n" |
| "onenand bad - show bad blocks\n" |
| "onenand read[.oob] addr off size\n" |
| "onenand write addr off size\n" |
| " read/write 'size' bytes starting at offset 'off'\n" |
| " to/from memory address 'addr', skipping bad blocks.\n" |
| "onenand erase [force] [off size] - erase 'size' bytes from\n" |
| "onenand test [off size] - test 'size' bytes from\n" |
| " offset 'off' (entire device if not specified)\n" |
| "onenand dump[.oob] off - dump page\n" |
| "onenand markbad off [...] - mark bad block(s) at offset (UNSAFE)" |
| ); |