| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2015 Freescale Semiconductor, Inc. |
| * |
| * Configuration settings for the Freescale i.MX7D SABRESD board. |
| */ |
| |
| #ifndef __MX7D_SABRESD_CONFIG_H |
| #define __MX7D_SABRESD_CONFIG_H |
| |
| #include "mx7_common.h" |
| |
| #define PHYS_SDRAM_SIZE SZ_1G |
| |
| #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR |
| |
| /* Size of malloc() pool */ |
| #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) |
| |
| /* MMC Config*/ |
| #define CONFIG_SYS_FSL_ESDHC_ADDR 0 |
| |
| /* I2C configs */ |
| #define CONFIG_SYS_I2C_MXC |
| #define CONFIG_SYS_I2C_SPEED 100000 |
| |
| #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 |
| |
| #ifdef CONFIG_IMX_BOOTAUX |
| /* Set to QSPI1 A flash at default */ |
| #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000 |
| |
| #define UPDATE_M4_ENV \ |
| "m4image=m4_qspi.bin\0" \ |
| "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \ |
| "update_m4_from_sd=" \ |
| "if sf probe 0:0; then " \ |
| "if run loadm4image; then " \ |
| "setexpr fw_sz ${filesize} + 0xffff; " \ |
| "setexpr fw_sz ${fw_sz} / 0x10000; " \ |
| "setexpr fw_sz ${fw_sz} * 0x10000; " \ |
| "sf erase 0x0 ${fw_sz}; " \ |
| "sf write ${loadaddr} 0x0 ${filesize}; " \ |
| "fi; " \ |
| "fi\0" \ |
| "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0" |
| #else |
| #define UPDATE_M4_ENV "" |
| #endif |
| |
| #define CONFIG_MFG_ENV_SETTINGS \ |
| "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ |
| "rdinit=/linuxrc " \ |
| "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ |
| "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ |
| "g_mass_storage.iSerialNumber=\"\" "\ |
| "clk_ignore_unused "\ |
| "\0" \ |
| "initrd_addr=0x83800000\0" \ |
| "initrd_high=0xffffffff\0" \ |
| "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ |
| |
| #define CONFIG_DFU_ENV_SETTINGS \ |
| "dfu_alt_info=image raw 0 0x800000;"\ |
| "u-boot raw 0 0x4000;"\ |
| "bootimg part 0 1;"\ |
| "rootfs part 0 2\0" \ |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| UPDATE_M4_ENV \ |
| CONFIG_MFG_ENV_SETTINGS \ |
| CONFIG_DFU_ENV_SETTINGS \ |
| "script=boot.scr\0" \ |
| "image=zImage\0" \ |
| "console=ttymxc0\0" \ |
| "fdt_high=0xffffffff\0" \ |
| "finduuid=part uuid mmc 0:1 uuid\0" \ |
| "initrd_high=0xffffffff\0" \ |
| "fdtfile=imx7d-sdb.dtb\0" \ |
| "fdt_addr=0x83000000\0" \ |
| "fdt_addr_r=0x83000000\0" \ |
| "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ |
| "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ |
| "ramdisk_addr_r=0x83100000\0" \ |
| "ramdiskaddr=0x83100000\0" \ |
| "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ |
| "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ |
| BOOTENV |
| |
| #define BOOT_TARGET_DEVICES(func) \ |
| func(MMC, mmc, 0) \ |
| func(DHCP, dhcp, na) \ |
| func(PXE, pxe, na) |
| |
| #include <config_distro_bootcmd.h> |
| |
| #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR |
| #define CONFIG_SYS_HZ 1000 |
| |
| /* Physical Memory Map */ |
| #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
| #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| |
| #define CONFIG_SYS_INIT_SP_OFFSET \ |
| (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_ADDR \ |
| (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) |
| |
| /* environment organization */ |
| |
| /* |
| * If want to use nand, define CONFIG_NAND_MXS and rework board |
| * to support nand, since emmc has pin conflicts with nand |
| */ |
| #ifdef CONFIG_NAND_MXS |
| /* NAND stuff */ |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_SYS_NAND_BASE 0x40000000 |
| #define CONFIG_SYS_NAND_5_ADDR_CYCLE |
| #define CONFIG_SYS_NAND_ONFI_DETECTION |
| |
| /* DMA stuff, needed for GPMI/MXS NAND support */ |
| #endif |
| |
| #ifdef CONFIG_NAND_MXS |
| #define CONFIG_SYS_FSL_USDHC_NUM 1 |
| #else |
| #define CONFIG_SYS_FSL_USDHC_NUM 2 |
| #endif |
| |
| /* USB Configs */ |
| #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| |
| #define CONFIG_IMX_THERMAL |
| |
| #define CONFIG_USBD_HS |
| |
| #ifdef CONFIG_VIDEO |
| #define CONFIG_VIDEO_MXS |
| #define CONFIG_VIDEO_LOGO |
| #define CONFIG_SPLASH_SCREEN |
| #define CONFIG_SPLASH_SCREEN_ALIGN |
| #define CONFIG_BMP_16BPP |
| #define CONFIG_VIDEO_BMP_RLE8 |
| #define CONFIG_VIDEO_BMP_LOGO |
| #endif |
| |
| #endif /* __CONFIG_H */ |