| CONFIG_ARM=y |
| CONFIG_ARCH_ZYNQ=y |
| CONFIG_SYS_TEXT_BASE=0x4000000 |
| CONFIG_SPL=y |
| CONFIG_DEBUG_UART_BASE=0xe0001000 |
| CONFIG_DEBUG_UART_CLOCK=50000000 |
| CONFIG_IDENT_STRING=" Xilinx Zynq DLC20 Rev1.0" |
| CONFIG_SPL_STACK_R_ADDR=0x200000 |
| CONFIG_DEBUG_UART=y |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_FIT=y |
| CONFIG_FIT_SIGNATURE=y |
| CONFIG_FIT_VERBOSE=y |
| CONFIG_IMAGE_FORMAT_LEGACY=y |
| CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd" |
| CONFIG_BOARD_EARLY_INIT_F=y |
| CONFIG_SPL_STACK_R=y |
| CONFIG_SPL_OS_BOOT=y |
| CONFIG_SPL_SPI_LOAD=y |
| CONFIG_SYS_PROMPT="Zynq> " |
| CONFIG_CMD_THOR_DOWNLOAD=y |
| CONFIG_CMD_EEPROM=y |
| CONFIG_CMD_DFU=y |
| # CONFIG_CMD_FLASH is not set |
| CONFIG_CMD_FPGA_LOADBP=y |
| CONFIG_CMD_FPGA_LOADFS=y |
| CONFIG_CMD_FPGA_LOADMK=y |
| CONFIG_CMD_FPGA_LOADP=y |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_SF=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_TFTPPUT=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_EXT4_WRITE=y |
| CONFIG_DEFAULT_DEVICE_TREE="zynq-dlc20-rev1.0" |
| CONFIG_ENV_IS_IN_SPI_FLASH=y |
| CONFIG_NET_RANDOM_ETHADDR=y |
| CONFIG_SPL_DM_SEQ_ALIAS=y |
| CONFIG_DFU_MMC=y |
| CONFIG_DFU_RAM=y |
| CONFIG_FPGA_XILINX=y |
| CONFIG_FPGA_ZYNQPL=y |
| CONFIG_DM_GPIO=y |
| CONFIG_SYS_I2C_ZYNQ=y |
| CONFIG_ZYNQ_I2C0=y |
| CONFIG_MMC_SDHCI=y |
| CONFIG_MMC_SDHCI_ZYNQ=y |
| CONFIG_SPI_FLASH=y |
| CONFIG_SPI_FLASH_STMICRO=y |
| CONFIG_SPI_FLASH_WINBOND=y |
| CONFIG_PHY_REALTEK=y |
| CONFIG_MII=y |
| CONFIG_ZYNQ_GEM=y |
| CONFIG_DEBUG_UART_ZYNQ=y |
| CONFIG_DEBUG_UART_ANNOUNCE=y |
| CONFIG_ZYNQ_SERIAL=y |
| CONFIG_ZYNQ_QSPI=y |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_ULPI_VIEWPORT=y |
| CONFIG_USB_ULPI=y |
| CONFIG_USB_GADGET=y |
| CONFIG_USB_GADGET_MANUFACTURER="Xilinx" |
| CONFIG_USB_GADGET_VENDOR_NUM=0x03fd |
| CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 |
| CONFIG_CI_UDC=y |
| CONFIG_USB_GADGET_DOWNLOAD=y |
| CONFIG_USB_FUNCTION_THOR=y |