drivers/phy/marvell/comphy_a3700.h - filogic/uboot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015-2016 Marvell International Ltd.
  */

 #ifndef _COMPHY_A3700_H_
 #define _COMPHY_A3700_H_

 #include "comphy.h"
 #include "comphy_hpipe.h"

 #define MVEBU_REG(offs)			\
 	((void __iomem *)(ulong)MVEBU_REGISTER(offs))

 #define DEFAULT_REFCLK_MHZ		25
 #define PLL_SET_DELAY_US		600
 #define PLL_LOCK_TIMEOUT		1000
 #define POLL_16B_REG			1
 #define POLL_32B_REG			0

 /*
  * COMPHY SB definitions
  */
 #define COMPHY_SEL_ADDR			MVEBU_REG(0x0183FC)
 #define rf_compy_select(lane)		(0x1 << (((lane) == 1) ? 4 : 0))

 #define COMPHY_PHY_CFG1_ADDR(lane)	MVEBU_REG(0x018300 + (lane) * 0x28)
 #define rb_pin_pu_iveref		BIT(1)
 #define rb_pin_reset_core		BIT(11)
 #define rb_pin_reset_comphy		BIT(12)
 #define rb_pin_pu_pll			BIT(16)
 #define rb_pin_pu_rx			BIT(17)
 #define rb_pin_pu_tx			BIT(18)
 #define rb_pin_tx_idle			BIT(19)
 #define rf_gen_rx_sel_shift		22
 #define rf_gen_rx_select		(0x0F << rf_gen_rx_sel_shift)
 #define rf_gen_tx_sel_shift		26
 #define rf_gen_tx_select		(0x0F << rf_gen_tx_sel_shift)
 #define rb_phy_rx_init			BIT(30)

 #define COMPHY_PHY_STAT1_ADDR(lane)	MVEBU_REG(0x018318 + (lane) * 0x28)
 #define rb_rx_init_done			BIT(0)
 #define rb_pll_ready_rx			BIT(2)
 #define rb_pll_ready_tx			BIT(3)

 /*
  * PCIe/USB/SGMII definitions
  */
 #define PCIE_BASE			MVEBU_REG(0x070000)
 #define PCIETOP_BASE			MVEBU_REG(0x080000)
 #define PCIE_RAMBASE			MVEBU_REG(0x08C000)
 #define PCIEPHY_BASE			MVEBU_REG(0x01F000)
 #define PCIEPHY_SHFT			2

 #define USB32_BASE			MVEBU_REG(0x050000) /* usb3 device */
 #define USB32H_BASE			MVEBU_REG(0x058000) /* usb3 host */
 #define USB3PHY_BASE			MVEBU_REG(0x05C000)
 #define USB2PHY_BASE			MVEBU_REG(0x05D000)
 #define USB2PHY2_BASE			MVEBU_REG(0x05F000)
 #define USB32_CTRL_BASE			MVEBU_REG(0x05D800)
 #define USB3PHY_SHFT			2

 #define SGMIIPHY_BASE(l)	(l == 1 ? USB3PHY_BASE : PCIEPHY_BASE)
 #define SGMIIPHY_ADDR(l, a)		\
 	((void __iomem *)(((a & 0x00007FF) * 2) + SGMIIPHY_BASE(l)))

 #define phy_read16(l, a)	read16((void __iomem *)SGMIIPHY_ADDR(l, a))
 #define phy_write16(l, a, data, mask)	\
 	reg_set16(SGMIIPHY_ADDR(l, a), data, mask)

 /* units */
 #define PCIE				1
 #define USB3				2

 #define PHY_BASE(unit)		((unit == PCIE) ? PCIEPHY_BASE : USB3PHY_BASE)
 #define PHY_SHFT(unit)		((unit == PCIE) ? PCIEPHY_SHFT : USB3PHY_SHFT)

 /* bit definition for USB32_CTRL_BASE (USB32 Control Mode) */
 #define usb32_ctrl_id_mode		BIT(0)
 #define usb32_ctrl_soft_id		BIT(1)
 #define usb32_ctrl_int_mode		BIT(4)


 #define PHY_PWR_PLL_CTRL_ADDR	0x01	/* for phy_read16 and phy_write16 */
 #define PWR_PLL_CTRL_ADDR(unit)		\
 	(PHY_PWR_PLL_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
 #define rf_phy_mode_shift		5
 #define rf_phy_mode_mask		(0x7 << rf_phy_mode_shift)
 #define rf_ref_freq_sel_shift		0
 #define rf_ref_freq_sel_mask		(0x1F << rf_ref_freq_sel_shift)
 #define PHY_MODE_SGMII			0x4

 /* for phy_read16 and phy_write16 */
 #define PHY_REG_KVCO_CAL_CTRL_ADDR	0x02
 #define KVCO_CAL_CTRL_ADDR(unit)	\
 	(PHY_REG_KVCO_CAL_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
 #define rb_use_max_pll_rate		BIT(12)
 #define rb_force_calibration_done	BIT(9)

 /* for phy_read16 and phy_write16 */
 #define PHY_DIG_LB_EN_ADDR		0x23
 #define DIG_LB_EN_ADDR(unit)		\
 	(PHY_DIG_LB_EN_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
 #define rf_data_width_shift		10
 #define rf_data_width_mask		(0x3 << rf_data_width_shift)

 /* for phy_read16 and phy_write16 */
 #define PHY_SYNC_PATTERN_ADDR		0x24
 #define SYNC_PATTERN_ADDR(unit)		\
 	(PHY_SYNC_PATTERN_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
 #define phy_txd_inv			BIT(10)
 #define phy_rxd_inv			BIT(11)

 /* for phy_read16 and phy_write16 */
 #define PHY_REG_UNIT_CTRL_ADDR		0x48
 #define UNIT_CTRL_ADDR(unit)		\
 	(PHY_REG_UNIT_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
 #define rb_idle_sync_en			BIT(12)

 /* for phy_read16 and phy_write16 */
 #define PHY_REG_GEN2_SETTINGS_2		0x3e
 #define GEN2_SETTING_2_ADDR(unit)	\
 	(PHY_REG_GEN2_SETTINGS_2 * PHY_SHFT(unit) + PHY_BASE(unit))
 #define g2_tx_ssc_amp			BIT(14)

 /* for phy_read16 and phy_write16 */
 #define PHY_REG_GEN2_SETTINGS_3		0x3f
 #define GEN2_SETTING_3_ADDR(unit)	\
 	(PHY_REG_GEN2_SETTINGS_3 * PHY_SHFT(unit) + PHY_BASE(unit))

 /* for phy_read16 and phy_write16 */
 #define PHY_MISC_REG0_ADDR		0x4f
 #define MISC_REG0_ADDR(unit)		\
 	(PHY_MISC_REG0_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
 #define rb_clk100m_125m_en		BIT(4)
 #define rb_clk500m_en			BIT(7)
 #define rb_ref_clk_sel			BIT(10)

 /* for phy_read16 and phy_write16 */
 #define PHY_REG_IFACE_REF_CLK_CTRL_ADDR		0x51
 #define UNIT_IFACE_REF_CLK_CTRL_ADDR(unit)	\
 	(PHY_REG_IFACE_REF_CLK_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
 #define rb_ref1m_gen_div_force		BIT(8)
 #define rf_ref1m_gen_div_value_shift	0
 #define rf_ref1m_gen_div_value_mask	(0xFF << rf_ref1m_gen_div_value_shift)

 /* for phy_read16 and phy_write16 */
 #define PHY_REG_ERR_CNT_CONST_CTRL_ADDR	0x6A
 #define UNIT_ERR_CNT_CONST_CTRL_ADDR(unit) \
 	(PHY_REG_ERR_CNT_CONST_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
 #define rb_fast_dfe_enable		BIT(13)

 #define MISC_REG1_ADDR(u)		(0x73 * PHY_SHFT(u) + PHY_BASE(u))
 #define bf_sel_bits_pcie_force		BIT(15)

 #define LANE_CFG0_ADDR(u)		(0x180 * PHY_SHFT(u) + PHY_BASE(u))
 #define bf_use_max_pll_rate		BIT(9)
 #define LANE_CFG1_ADDR(u)		(0x181 * PHY_SHFT(u) + PHY_BASE(u))
 #define bf_use_max_pll_rate		BIT(9)
 /* 0x5c310 = 0x93 (set BIT7) */
 #define LANE_CFG4_ADDR(u)		(0x188 * PHY_SHFT(u) + PHY_BASE(u))
 #define bf_spread_spectrum_clock_en	BIT(7)

 #define LANE_STAT1_ADDR(u)		(0x183 * PHY_SHFT(u) + PHY_BASE(u))
 #define rb_txdclk_pclk_en		BIT(0)

 #define GLOB_PHY_CTRL0_ADDR(u)		(0x1c1 * PHY_SHFT(u) + PHY_BASE(u))
 #define bf_soft_rst			BIT(0)
 #define bf_mode_refdiv			0x30
 #define rb_mode_core_clk_freq_sel	BIT(9)
 #define rb_mode_pipe_width_32		BIT(3)

 #define TEST_MODE_CTRL_ADDR(u)		(0x1c2 * PHY_SHFT(u) + PHY_BASE(u))
 #define rb_mode_margin_override		BIT(2)

 #define GLOB_CLK_SRC_LO_ADDR(u)		(0x1c3 * PHY_SHFT(u) + PHY_BASE(u))
 #define bf_cfg_sel_20b			BIT(15)

 #define PWR_MGM_TIM1_ADDR(u)		(0x1d0 * PHY_SHFT(u) + PHY_BASE(u))

 #define PHY_REF_CLK_ADDR		(0x4814 + PCIE_BASE)

 #define USB3_CTRPUL_VAL_REG		(0x20 + USB32_BASE)
 #define USB3H_CTRPUL_VAL_REG		(0x3454 + USB32H_BASE)
 #define rb_usb3_ctr_100ns		0xff000000

 #define USB2_OTG_PHY_CTRL_ADDR		(0x820 + USB2PHY_BASE)
 #define rb_usb2phy_suspm		BIT(14)
 #define rb_usb2phy_pu			BIT(0)

 #define USB2_PHY_OTG_CTRL_ADDR		(0x34 + USB2PHY_BASE)
 #define rb_pu_otg			BIT(4)

 #define USB2_PHY_CHRGR_DET_ADDR		(0x38 + USB2PHY_BASE)
 #define rb_cdp_en			BIT(2)
 #define rb_dcp_en			BIT(3)
 #define rb_pd_en			BIT(4)
 #define rb_pu_chrg_dtc			BIT(5)
 #define rb_cdp_dm_auto			BIT(7)
 #define rb_enswitch_dp			BIT(12)
 #define rb_enswitch_dm			BIT(13)

 #define USB2_CAL_CTRL_ADDR		(0x8 + USB2PHY_BASE)
 #define rb_usb2phy_pllcal_done		BIT(31)
 #define rb_usb2phy_impcal_done		BIT(23)

 #define USB2_PLL_CTRL0_ADDR		(0x0 + USB2PHY_BASE)
 #define rb_usb2phy_pll_ready		BIT(31)

 #define USB2_RX_CHAN_CTRL1_ADDR		(0x18 + USB2PHY_BASE)
 #define rb_usb2phy_sqcal_done		BIT(31)

 #define USB2_PHY2_CTRL_ADDR		(0x804 + USB2PHY2_BASE)
 #define rb_usb2phy2_suspm		BIT(7)
 #define rb_usb2phy2_pu			BIT(0)
 #define USB2_PHY2_CAL_CTRL_ADDR		(0x8 + USB2PHY2_BASE)
 #define USB2_PHY2_PLL_CTRL0_ADDR	(0x0 + USB2PHY2_BASE)
 #define USB2_PHY2_RX_CHAN_CTRL1_ADDR	(0x18 + USB2PHY2_BASE)

 #define USB2_PHY_BASE(usb32)	(usb32 == 0 ? USB2PHY2_BASE : USB2PHY_BASE)
 #define USB2_PHY_CTRL_ADDR(usb32) \
 	(usb32 == 0 ? USB2_PHY2_CTRL_ADDR : USB2_OTG_PHY_CTRL_ADDR)
 #define RB_USB2PHY_SUSPM(usb32) \
 	(usb32 == 0 ? rb_usb2phy2_suspm : rb_usb2phy_suspm)
 #define RB_USB2PHY_PU(usb32) \
 	(usb32 == 0 ? rb_usb2phy2_pu : rb_usb2phy_pu)
 #define USB2_PHY_CAL_CTRL_ADDR(usb32) \
 	(usb32 == 0 ? USB2_PHY2_CAL_CTRL_ADDR : USB2_CAL_CTRL_ADDR)
 #define USB2_PHY_RX_CHAN_CTRL1_ADDR(usb32) \
 	(usb32 == 0 ? USB2_PHY2_RX_CHAN_CTRL1_ADDR : USB2_RX_CHAN_CTRL1_ADDR)
 #define USB2_PHY_PLL_CTRL0_ADDR(usb32) \
 	(usb32 == 0 ? USB2_PHY2_PLL_CTRL0_ADDR : USB2_PLL_CTRL0_ADDR)

 /*
  * SATA definitions
  */
 #define AHCI_BASE			MVEBU_REG(0xE0000)

 #define rh_vsreg_addr			(AHCI_BASE + 0x178)
 #define rh_vsreg_data			(AHCI_BASE + 0x17C)
 #define rh_vs0_a			(AHCI_BASE + 0xA0)
 #define rh_vs0_d			(AHCI_BASE + 0xA4)

 #define vphy_sync_pattern_reg		0x224
 #define bs_txd_inv			BIT(10)
 #define bs_rxd_inv			BIT(11)

 #define vphy_loopback_reg0		0x223
 #define bs_phyintf_40bit		0x0C00
 #define bs_pll_ready_tx			0x10

 #define vphy_power_reg0			0x201

 #define vphy_calctl_reg			0x202
 #define bs_max_pll_rate			BIT(12)

 #define vphy_reserve_reg		0x0e
 #define bs_phyctrl_frm_pin		BIT(13)

 #define vsata_ctrl_reg			0x00
 #define bs_phy_pu_pll			BIT(6)

 /*
  * SDIO/eMMC definitions
  */
 #define SDIO_BASE			MVEBU_REG(0xD8000)

 #define SDIO_HOST_CTRL1_ADDR		(SDIO_BASE + 0x28)
 #define SDIO_SDHC_FIFO_ADDR		(SDIO_BASE + 0x12C)
 #define SDIO_CAP_12_ADDR		(SDIO_BASE + 0x40)
 #define SDIO_ENDIAN_ADDR		(SDIO_BASE + 0x1A4)
 #define SDIO_PHY_TIMING_ADDR		(SDIO_BASE + 0x170)
 #define SDIO_PHY_PAD_CTRL0_ADDR		(SDIO_BASE + 0x178)
 #define SDIO_DLL_RST_ADDR		(SDIO_BASE + 0x148)

 #endif /* _COMPHY_A3700_H_ */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright (C) 2015-2016 Marvell International Ltd.
	*/

	#ifndef _COMPHY_A3700_H_
	#define _COMPHY_A3700_H_

	#include "comphy.h"
	#include "comphy_hpipe.h"

	#define MVEBU_REG(offs) \
	((void __iomem *)(ulong)MVEBU_REGISTER(offs))

	#define DEFAULT_REFCLK_MHZ 25
	#define PLL_SET_DELAY_US 600
	#define PLL_LOCK_TIMEOUT 1000
	#define POLL_16B_REG 1
	#define POLL_32B_REG 0

	/*
	* COMPHY SB definitions
	*/
	#define COMPHY_SEL_ADDR MVEBU_REG(0x0183FC)
	#define rf_compy_select(lane) (0x1 << (((lane) == 1) ? 4 : 0))

	#define COMPHY_PHY_CFG1_ADDR(lane) MVEBU_REG(0x018300 + (lane) * 0x28)
	#define rb_pin_pu_iveref BIT(1)
	#define rb_pin_reset_core BIT(11)
	#define rb_pin_reset_comphy BIT(12)
	#define rb_pin_pu_pll BIT(16)
	#define rb_pin_pu_rx BIT(17)
	#define rb_pin_pu_tx BIT(18)
	#define rb_pin_tx_idle BIT(19)
	#define rf_gen_rx_sel_shift 22
	#define rf_gen_rx_select (0x0F << rf_gen_rx_sel_shift)
	#define rf_gen_tx_sel_shift 26
	#define rf_gen_tx_select (0x0F << rf_gen_tx_sel_shift)
	#define rb_phy_rx_init BIT(30)

	#define COMPHY_PHY_STAT1_ADDR(lane) MVEBU_REG(0x018318 + (lane) * 0x28)
	#define rb_rx_init_done BIT(0)
	#define rb_pll_ready_rx BIT(2)
	#define rb_pll_ready_tx BIT(3)

	/*
	* PCIe/USB/SGMII definitions
	*/
	#define PCIE_BASE MVEBU_REG(0x070000)
	#define PCIETOP_BASE MVEBU_REG(0x080000)
	#define PCIE_RAMBASE MVEBU_REG(0x08C000)
	#define PCIEPHY_BASE MVEBU_REG(0x01F000)
	#define PCIEPHY_SHFT 2

	#define USB32_BASE MVEBU_REG(0x050000) /* usb3 device */
	#define USB32H_BASE MVEBU_REG(0x058000) /* usb3 host */
	#define USB3PHY_BASE MVEBU_REG(0x05C000)
	#define USB2PHY_BASE MVEBU_REG(0x05D000)
	#define USB2PHY2_BASE MVEBU_REG(0x05F000)
	#define USB32_CTRL_BASE MVEBU_REG(0x05D800)
	#define USB3PHY_SHFT 2

	#define SGMIIPHY_BASE(l) (l == 1 ? USB3PHY_BASE : PCIEPHY_BASE)
	#define SGMIIPHY_ADDR(l, a) \
	((void __iomem )(((a & 0x00007FF) 2) + SGMIIPHY_BASE(l)))

	#define phy_read16(l, a) read16((void __iomem *)SGMIIPHY_ADDR(l, a))
	#define phy_write16(l, a, data, mask) \
	reg_set16(SGMIIPHY_ADDR(l, a), data, mask)

	/* units */
	#define PCIE 1
	#define USB3 2

	#define PHY_BASE(unit) ((unit == PCIE) ? PCIEPHY_BASE : USB3PHY_BASE)
	#define PHY_SHFT(unit) ((unit == PCIE) ? PCIEPHY_SHFT : USB3PHY_SHFT)

	/* bit definition for USB32_CTRL_BASE (USB32 Control Mode) */
	#define usb32_ctrl_id_mode BIT(0)
	#define usb32_ctrl_soft_id BIT(1)
	#define usb32_ctrl_int_mode BIT(4)


	#define PHY_PWR_PLL_CTRL_ADDR 0x01 /* for phy_read16 and phy_write16 */
	#define PWR_PLL_CTRL_ADDR(unit) \
	(PHY_PWR_PLL_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
	#define rf_phy_mode_shift 5
	#define rf_phy_mode_mask (0x7 << rf_phy_mode_shift)
	#define rf_ref_freq_sel_shift 0
	#define rf_ref_freq_sel_mask (0x1F << rf_ref_freq_sel_shift)
	#define PHY_MODE_SGMII 0x4

	/* for phy_read16 and phy_write16 */
	#define PHY_REG_KVCO_CAL_CTRL_ADDR 0x02
	#define KVCO_CAL_CTRL_ADDR(unit) \
	(PHY_REG_KVCO_CAL_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
	#define rb_use_max_pll_rate BIT(12)
	#define rb_force_calibration_done BIT(9)

	/* for phy_read16 and phy_write16 */
	#define PHY_DIG_LB_EN_ADDR 0x23
	#define DIG_LB_EN_ADDR(unit) \
	(PHY_DIG_LB_EN_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
	#define rf_data_width_shift 10
	#define rf_data_width_mask (0x3 << rf_data_width_shift)

	/* for phy_read16 and phy_write16 */
	#define PHY_SYNC_PATTERN_ADDR 0x24
	#define SYNC_PATTERN_ADDR(unit) \
	(PHY_SYNC_PATTERN_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
	#define phy_txd_inv BIT(10)
	#define phy_rxd_inv BIT(11)

	/* for phy_read16 and phy_write16 */
	#define PHY_REG_UNIT_CTRL_ADDR 0x48
	#define UNIT_CTRL_ADDR(unit) \
	(PHY_REG_UNIT_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
	#define rb_idle_sync_en BIT(12)

	/* for phy_read16 and phy_write16 */
	#define PHY_REG_GEN2_SETTINGS_2 0x3e
	#define GEN2_SETTING_2_ADDR(unit) \
	(PHY_REG_GEN2_SETTINGS_2 * PHY_SHFT(unit) + PHY_BASE(unit))
	#define g2_tx_ssc_amp BIT(14)

	/* for phy_read16 and phy_write16 */
	#define PHY_REG_GEN2_SETTINGS_3 0x3f
	#define GEN2_SETTING_3_ADDR(unit) \
	(PHY_REG_GEN2_SETTINGS_3 * PHY_SHFT(unit) + PHY_BASE(unit))

	/* for phy_read16 and phy_write16 */
	#define PHY_MISC_REG0_ADDR 0x4f
	#define MISC_REG0_ADDR(unit) \
	(PHY_MISC_REG0_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
	#define rb_clk100m_125m_en BIT(4)
	#define rb_clk500m_en BIT(7)
	#define rb_ref_clk_sel BIT(10)

	/* for phy_read16 and phy_write16 */
	#define PHY_REG_IFACE_REF_CLK_CTRL_ADDR 0x51
	#define UNIT_IFACE_REF_CLK_CTRL_ADDR(unit) \
	(PHY_REG_IFACE_REF_CLK_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
	#define rb_ref1m_gen_div_force BIT(8)
	#define rf_ref1m_gen_div_value_shift 0
	#define rf_ref1m_gen_div_value_mask (0xFF << rf_ref1m_gen_div_value_shift)

	/* for phy_read16 and phy_write16 */
	#define PHY_REG_ERR_CNT_CONST_CTRL_ADDR 0x6A
	#define UNIT_ERR_CNT_CONST_CTRL_ADDR(unit) \
	(PHY_REG_ERR_CNT_CONST_CTRL_ADDR * PHY_SHFT(unit) + PHY_BASE(unit))
	#define rb_fast_dfe_enable BIT(13)

	#define MISC_REG1_ADDR(u) (0x73 * PHY_SHFT(u) + PHY_BASE(u))
	#define bf_sel_bits_pcie_force BIT(15)

	#define LANE_CFG0_ADDR(u) (0x180 * PHY_SHFT(u) + PHY_BASE(u))
	#define bf_use_max_pll_rate BIT(9)
	#define LANE_CFG1_ADDR(u) (0x181 * PHY_SHFT(u) + PHY_BASE(u))
	#define bf_use_max_pll_rate BIT(9)
	/* 0x5c310 = 0x93 (set BIT7) */
	#define LANE_CFG4_ADDR(u) (0x188 * PHY_SHFT(u) + PHY_BASE(u))
	#define bf_spread_spectrum_clock_en BIT(7)

	#define LANE_STAT1_ADDR(u) (0x183 * PHY_SHFT(u) + PHY_BASE(u))
	#define rb_txdclk_pclk_en BIT(0)

	#define GLOB_PHY_CTRL0_ADDR(u) (0x1c1 * PHY_SHFT(u) + PHY_BASE(u))
	#define bf_soft_rst BIT(0)
	#define bf_mode_refdiv 0x30
	#define rb_mode_core_clk_freq_sel BIT(9)
	#define rb_mode_pipe_width_32 BIT(3)

	#define TEST_MODE_CTRL_ADDR(u) (0x1c2 * PHY_SHFT(u) + PHY_BASE(u))
	#define rb_mode_margin_override BIT(2)

	#define GLOB_CLK_SRC_LO_ADDR(u) (0x1c3 * PHY_SHFT(u) + PHY_BASE(u))
	#define bf_cfg_sel_20b BIT(15)

	#define PWR_MGM_TIM1_ADDR(u) (0x1d0 * PHY_SHFT(u) + PHY_BASE(u))

	#define PHY_REF_CLK_ADDR (0x4814 + PCIE_BASE)

	#define USB3_CTRPUL_VAL_REG (0x20 + USB32_BASE)
	#define USB3H_CTRPUL_VAL_REG (0x3454 + USB32H_BASE)
	#define rb_usb3_ctr_100ns 0xff000000

	#define USB2_OTG_PHY_CTRL_ADDR (0x820 + USB2PHY_BASE)
	#define rb_usb2phy_suspm BIT(14)
	#define rb_usb2phy_pu BIT(0)

	#define USB2_PHY_OTG_CTRL_ADDR (0x34 + USB2PHY_BASE)
	#define rb_pu_otg BIT(4)

	#define USB2_PHY_CHRGR_DET_ADDR (0x38 + USB2PHY_BASE)
	#define rb_cdp_en BIT(2)
	#define rb_dcp_en BIT(3)
	#define rb_pd_en BIT(4)
	#define rb_pu_chrg_dtc BIT(5)
	#define rb_cdp_dm_auto BIT(7)
	#define rb_enswitch_dp BIT(12)
	#define rb_enswitch_dm BIT(13)

	#define USB2_CAL_CTRL_ADDR (0x8 + USB2PHY_BASE)
	#define rb_usb2phy_pllcal_done BIT(31)
	#define rb_usb2phy_impcal_done BIT(23)

	#define USB2_PLL_CTRL0_ADDR (0x0 + USB2PHY_BASE)
	#define rb_usb2phy_pll_ready BIT(31)

	#define USB2_RX_CHAN_CTRL1_ADDR (0x18 + USB2PHY_BASE)
	#define rb_usb2phy_sqcal_done BIT(31)

	#define USB2_PHY2_CTRL_ADDR (0x804 + USB2PHY2_BASE)
	#define rb_usb2phy2_suspm BIT(7)
	#define rb_usb2phy2_pu BIT(0)
	#define USB2_PHY2_CAL_CTRL_ADDR (0x8 + USB2PHY2_BASE)
	#define USB2_PHY2_PLL_CTRL0_ADDR (0x0 + USB2PHY2_BASE)
	#define USB2_PHY2_RX_CHAN_CTRL1_ADDR (0x18 + USB2PHY2_BASE)

	#define USB2_PHY_BASE(usb32) (usb32 == 0 ? USB2PHY2_BASE : USB2PHY_BASE)
	#define USB2_PHY_CTRL_ADDR(usb32) \
	(usb32 == 0 ? USB2_PHY2_CTRL_ADDR : USB2_OTG_PHY_CTRL_ADDR)
	#define RB_USB2PHY_SUSPM(usb32) \
	(usb32 == 0 ? rb_usb2phy2_suspm : rb_usb2phy_suspm)
	#define RB_USB2PHY_PU(usb32) \
	(usb32 == 0 ? rb_usb2phy2_pu : rb_usb2phy_pu)
	#define USB2_PHY_CAL_CTRL_ADDR(usb32) \
	(usb32 == 0 ? USB2_PHY2_CAL_CTRL_ADDR : USB2_CAL_CTRL_ADDR)
	#define USB2_PHY_RX_CHAN_CTRL1_ADDR(usb32) \
	(usb32 == 0 ? USB2_PHY2_RX_CHAN_CTRL1_ADDR : USB2_RX_CHAN_CTRL1_ADDR)
	#define USB2_PHY_PLL_CTRL0_ADDR(usb32) \
	(usb32 == 0 ? USB2_PHY2_PLL_CTRL0_ADDR : USB2_PLL_CTRL0_ADDR)

	/*
	* SATA definitions
	*/
	#define AHCI_BASE MVEBU_REG(0xE0000)

	#define rh_vsreg_addr (AHCI_BASE + 0x178)
	#define rh_vsreg_data (AHCI_BASE + 0x17C)
	#define rh_vs0_a (AHCI_BASE + 0xA0)
	#define rh_vs0_d (AHCI_BASE + 0xA4)

	#define vphy_sync_pattern_reg 0x224
	#define bs_txd_inv BIT(10)
	#define bs_rxd_inv BIT(11)

	#define vphy_loopback_reg0 0x223
	#define bs_phyintf_40bit 0x0C00
	#define bs_pll_ready_tx 0x10

	#define vphy_power_reg0 0x201

	#define vphy_calctl_reg 0x202
	#define bs_max_pll_rate BIT(12)

	#define vphy_reserve_reg 0x0e
	#define bs_phyctrl_frm_pin BIT(13)

	#define vsata_ctrl_reg 0x00
	#define bs_phy_pu_pll BIT(6)

	/*
	* SDIO/eMMC definitions
	*/
	#define SDIO_BASE MVEBU_REG(0xD8000)

	#define SDIO_HOST_CTRL1_ADDR (SDIO_BASE + 0x28)
	#define SDIO_SDHC_FIFO_ADDR (SDIO_BASE + 0x12C)
	#define SDIO_CAP_12_ADDR (SDIO_BASE + 0x40)
	#define SDIO_ENDIAN_ADDR (SDIO_BASE + 0x1A4)
	#define SDIO_PHY_TIMING_ADDR (SDIO_BASE + 0x170)
	#define SDIO_PHY_PAD_CTRL0_ADDR (SDIO_BASE + 0x178)
	#define SDIO_DLL_RST_ADDR (SDIO_BASE + 0x148)

	#endif /* _COMPHY_A3700_H_ */