blob: 5d1ce3e72d60ca9ea30c4dc02c0894d3ccfd7324 [file] [log] [blame]
menu "ARM architecture"
depends on ARM
config SYS_ARCH
default "arm"
config ARM64
bool
select PHYS_64BIT
select SYS_CACHE_SHIFT_6
config DMA_ADDR_T_64BIT
bool
default y if ARM64
config HAS_VBAR
bool
config HAS_THUMB2
bool
# Used for compatibility with asm files copied from the kernel
config ARM_ASM_UNIFIED
bool
default y
# Used for compatibility with asm files copied from the kernel
config THUMB2_KERNEL
bool
# If set, the workarounds for these ARM errata are applied early during U-Boot
# startup. Note that in general these options force the workarounds to be
# applied; no CPU-type/version detection exists, unlike the similar options in
# the Linux kernel. Do not set these options unless they apply! Also note that
# the following can be machine specific errata. These do have ability to
# provide rudimentary version and machine specific checks, but expect no
# product checks:
# CONFIG_ARM_ERRATA_430973
# CONFIG_ARM_ERRATA_454179
# CONFIG_ARM_ERRATA_621766
# CONFIG_ARM_ERRATA_798870
# CONFIG_ARM_ERRATA_801819
config ARM_ERRATA_430973
bool
config ARM_ERRATA_454179
bool
config ARM_ERRATA_621766
bool
config ARM_ERRATA_716044
bool
config ARM_ERRATA_725233
bool
config ARM_ERRATA_742230
bool
config ARM_ERRATA_743622
bool
config ARM_ERRATA_751472
bool
config ARM_ERRATA_761320
bool
config ARM_ERRATA_773022
bool
config ARM_ERRATA_774769
bool
config ARM_ERRATA_794072
bool
config ARM_ERRATA_798870
bool
config ARM_ERRATA_801819
bool
config ARM_ERRATA_826974
bool
config ARM_ERRATA_828024
bool
config ARM_ERRATA_829520
bool
config ARM_ERRATA_833069
bool
config ARM_ERRATA_833471
bool
config ARM_ERRATA_845369
bool
config ARM_ERRATA_852421
bool
config ARM_ERRATA_852423
bool
config CPU_ARM720T
bool
select SYS_CACHE_SHIFT_5
config CPU_ARM920T
bool
select SYS_CACHE_SHIFT_5
config CPU_ARM926EJS
bool
select SYS_CACHE_SHIFT_5
config CPU_ARM946ES
bool
select SYS_CACHE_SHIFT_5
config CPU_ARM1136
bool
select SYS_CACHE_SHIFT_5
config CPU_ARM1176
bool
select HAS_VBAR
select SYS_CACHE_SHIFT_5
config CPU_V7
bool
select HAS_VBAR
select HAS_THUMB2
select SYS_CACHE_SHIFT_6
config CPU_V7M
bool
select HAS_THUMB2
select THUMB2_KERNEL
select SYS_CACHE_SHIFT_5
config CPU_PXA
bool
select SYS_CACHE_SHIFT_5
config CPU_SA1100
bool
select SYS_CACHE_SHIFT_5
config SYS_CPU
default "arm720t" if CPU_ARM720T
default "arm920t" if CPU_ARM920T
default "arm926ejs" if CPU_ARM926EJS
default "arm946es" if CPU_ARM946ES
default "arm1136" if CPU_ARM1136
default "arm1176" if CPU_ARM1176
default "armv7" if CPU_V7
default "armv7m" if CPU_V7M
default "pxa" if CPU_PXA
default "sa1100" if CPU_SA1100
default "armv8" if ARM64
config SYS_ARM_ARCH
int
default 4 if CPU_ARM720T
default 4 if CPU_ARM920T
default 5 if CPU_ARM926EJS
default 5 if CPU_ARM946ES
default 6 if CPU_ARM1136
default 6 if CPU_ARM1176
default 7 if CPU_V7
default 7 if CPU_V7M
default 5 if CPU_PXA
default 4 if CPU_SA1100
default 8 if ARM64
config SYS_CACHE_SHIFT_5
bool
config SYS_CACHE_SHIFT_6
bool
config SYS_CACHE_SHIFT_7
bool
config SYS_CACHELINE_SIZE
int
default 128 if SYS_CACHE_SHIFT_7
default 64 if SYS_CACHE_SHIFT_6
default 32 if SYS_CACHE_SHIFT_5
config ARM_SMCCC
bool "Support for ARM SMC Calling Convention (SMCCC)"
depends on CPU_V7 || ARM64
select ARM_PSCI_FW
help
Say Y here if you want to enable ARM SMC Calling Convention.
This should be enabled if U-Boot needs to communicate with system
firmware (for example, PSCI) according to SMCCC.
config SEMIHOSTING
bool "support boot from semihosting"
help
In emulated environments, semihosting is a way for
the hosted environment to call out to the emulator to
retrieve files from the host machine.
config SYS_THUMB_BUILD
bool "Build U-Boot using the Thumb instruction set"
depends on !ARM64
help
Use this flag to build U-Boot using the Thumb instruction set for
ARM architectures. Thumb instruction set provides better code
density. For ARM architectures that support Thumb2 this flag will
result in Thumb2 code generated by GCC.
config SPL_SYS_THUMB_BUILD
bool "Build SPL using the Thumb instruction set"
default y if SYS_THUMB_BUILD
depends on !ARM64
help
Use this flag to build SPL using the Thumb instruction set for
ARM architectures. Thumb instruction set provides better code
density. For ARM architectures that support Thumb2 this flag will
result in Thumb2 code generated by GCC.
config SYS_L2CACHE_OFF
bool "L2cache off"
help
If SoC does not support L2CACHE or one do not want to enable
L2CACHE, choose this option.
config ENABLE_ARM_SOC_BOOT0_HOOK
bool "prepare BOOT0 header"
help
If the SoC's BOOT0 requires a header area filled with (magic)
values, then choose this option, and create a define called
ARM_SOC_BOOT0_HOOK which contains the required assembler
preprocessor code.
config ARM_CORTEX_CPU_IS_UP
bool
default n
config USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy"
default y
depends on !ARM64
help
Enable the generation of an optimized version of memcpy.
Such implementation may be faster under some conditions
but may increase the binary size.
config SPL_USE_ARCH_MEMCPY
bool "Use an assembly optimized implementation of memcpy for SPL"
default y if USE_ARCH_MEMCPY
depends on !ARM64
help
Enable the generation of an optimized version of memcpy.
Such implementation may be faster under some conditions
but may increase the binary size.
config USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset"
default y
depends on !ARM64
help
Enable the generation of an optimized version of memset.
Such implementation may be faster under some conditions
but may increase the binary size.
config SPL_USE_ARCH_MEMSET
bool "Use an assembly optimized implementation of memset for SPL"
default y if USE_ARCH_MEMSET
depends on !ARM64
help
Enable the generation of an optimized version of memset.
Such implementation may be faster under some conditions
but may increase the binary size.
config ARM64_SUPPORT_AARCH32
bool "ARM64 system support AArch32 execution state"
default y if ARM64 && !TARGET_THUNDERX_88XX
help
This ARM64 system supports AArch32 execution state.
choice
prompt "Target select"
default TARGET_HIKEY
config ARCH_AT91
bool "Atmel AT91"
select SPL_BOARD_INIT if SPL
config TARGET_EDB93XX
bool "Support edb93xx"
select CPU_ARM920T
config TARGET_ASPENITE
bool "Support aspenite"
select CPU_ARM926EJS
config TARGET_GPLUGD
bool "Support gplugd"
select CPU_ARM926EJS
config ARCH_DAVINCI
bool "TI DaVinci"
select CPU_ARM926EJS
imply CMD_SAVES
help
Support for TI's DaVinci platform.
config KIRKWOOD
bool "Marvell Kirkwood"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
select ARCH_MISC_INIT
config ARCH_MVEBU
bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
select OF_CONTROL
select OF_SEPARATE
select DM
select DM_ETH
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
config TARGET_DEVKIT3250
bool "Support devkit3250"
select CPU_ARM926EJS
select SUPPORT_SPL
config TARGET_WORK_92105
bool "Support work_92105"
select CPU_ARM926EJS
select SUPPORT_SPL
config TARGET_MX25PDK
bool "Support mx25pdk"
select BOARD_LATE_INIT
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
config TARGET_ZMX25
bool "Support zmx25"
select BOARD_LATE_INIT
select CPU_ARM926EJS
config TARGET_APF27
bool "Support apf27"
select CPU_ARM926EJS
select SUPPORT_SPL
config TARGET_APX4DEVKIT
bool "Support apx4devkit"
select CPU_ARM926EJS
select SUPPORT_SPL
config TARGET_XFI3
bool "Support xfi3"
select CPU_ARM926EJS
select SUPPORT_SPL
config TARGET_M28EVK
bool "Support m28evk"
select CPU_ARM926EJS
select SUPPORT_SPL
config TARGET_MX23EVK
bool "Support mx23evk"
select CPU_ARM926EJS
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
config TARGET_MX28EVK
bool "Support mx28evk"
select CPU_ARM926EJS
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
config TARGET_MX23_OLINUXINO
bool "Support mx23_olinuxino"
select CPU_ARM926EJS
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
config TARGET_BG0900
bool "Support bg0900"
select CPU_ARM926EJS
select SUPPORT_SPL
config TARGET_SANSA_FUZE_PLUS
bool "Support sansa_fuze_plus"
select CPU_ARM926EJS
select SUPPORT_SPL
config TARGET_SC_SPS_1
bool "Support sc_sps_1"
select CPU_ARM926EJS
select SUPPORT_SPL
config ORION5X
bool "Marvell Orion"
select CPU_ARM926EJS
config TARGET_SPEAR300
bool "Support spear300"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
imply CMD_SAVES
config TARGET_SPEAR310
bool "Support spear310"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
imply CMD_SAVES
config TARGET_SPEAR320
bool "Support spear320"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
imply CMD_SAVES
config TARGET_SPEAR600
bool "Support spear600"
select CPU_ARM926EJS
select BOARD_EARLY_INIT_F
imply CMD_SAVES
config TARGET_STV0991
bool "Support stv0991"
select CPU_V7
select DM
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
select SPI_FLASH
config TARGET_X600
bool "Support x600"
select BOARD_LATE_INIT
select CPU_ARM926EJS
select SUPPORT_SPL
config TARGET_IMX31_PHYCORE
bool "Support imx31_phycore_eet"
select CPU_ARM1136
select BOARD_EARLY_INIT_F
config TARGET_IMX31_PHYCORE_EET
bool "Support imx31_phycore_eet"
select BOARD_LATE_INIT
select CPU_ARM1136
select BOARD_EARLY_INIT_F
config TARGET_MX31ADS
bool "Support mx31ads"
select CPU_ARM1136
select BOARD_EARLY_INIT_F
config TARGET_MX31PDK
bool "Support mx31pdk"
select BOARD_LATE_INIT
select CPU_ARM1136
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
config TARGET_WOODBURN
bool "Support woodburn"
select CPU_ARM1136
config TARGET_WOODBURN_SD
bool "Support woodburn_sd"
select CPU_ARM1136
select SUPPORT_SPL
config TARGET_FLEA3
bool "Support flea3"
select CPU_ARM1136
config TARGET_MX35PDK
bool "Support mx35pdk"
select BOARD_LATE_INIT
select CPU_ARM1136
config ARCH_BCM283X
bool "Broadcom BCM283X family"
select DM
select DM_SERIAL
select DM_GPIO
select OF_CONTROL
imply FAT_WRITE
config TARGET_VEXPRESS_CA15_TC2
bool "Support vexpress_ca15_tc2"
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
config TARGET_VEXPRESS_CA5X2
bool "Support vexpress_ca5x2"
select CPU_V7
config TARGET_VEXPRESS_CA9X4
bool "Support vexpress_ca9x4"
select CPU_V7
config TARGET_BCM23550_W1D
bool "Support bcm23550_w1d"
select CPU_V7
imply CRC32_VERIFY
imply FAT_WRITE
config TARGET_BCM28155_AP
bool "Support bcm28155_ap"
select CPU_V7
imply CRC32_VERIFY
imply FAT_WRITE
config TARGET_BCMCYGNUS
bool "Support bcmcygnus"
select CPU_V7
imply CRC32_VERIFY
imply CMD_HASH
imply FAT_WRITE
imply HASH_VERIFY
imply NETDEVICES
imply BCM_SF2_ETH
imply BCM_SF2_ETH_GMAC
config TARGET_BCMNSP
bool "Support bcmnsp"
select CPU_V7
config TARGET_BCMNS2
bool "Support Broadcom Northstar2"
select ARM64
help
Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
ARMv8 Cortex-A57 processors targeting a broad range of networking
applications
config ARCH_EXYNOS
bool "Samsung EXYNOS"
select DM
select DM_I2C
select DM_SPI_FLASH
select DM_SERIAL
select DM_SPI
select DM_GPIO
select DM_KEYBOARD
imply FAT_WRITE
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
select CPU_V7
select DM
select DM_SERIAL
select DM_GPIO
select DM_I2C
config ARCH_HIGHBANK
bool "Calxeda Highbank"
select CPU_V7
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select DM
select DM_SERIAL
config ARCH_KEYSTONE
bool "TI Keystone"
select CPU_V7
select SUPPORT_SPL
select SYS_THUMB_BUILD
select CMD_POWEROFF
imply CMD_MTDPARTS
imply FIT
imply CMD_SAVES
config ARCH_OMAP2PLUS
bool "TI OMAP2+"
select CPU_V7
select SPL_BOARD_INIT if SPL
select SPL_STACK_R if SPL
select SUPPORT_SPL
imply FIT
config ARCH_MESON
bool "Amlogic Meson"
help
Support for the Meson SoC family developed by Amlogic Inc.,
targeted at media players and tablet computers. We currently
support the S905 (GXBaby) 64-bit SoC.
config ARCH_MX7ULP
bool "NXP MX7ULP"
select CPU_V7
select ROM_UNIFIED_SECTIONS
config ARCH_MX7
bool "Freescale MX7"
select CPU_V7
select SYS_FSL_HAS_SEC if SECURE_BOOT
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
select BOARD_EARLY_INIT_F
select ARCH_MISC_INIT
config ARCH_MX6
bool "Freescale MX6"
select CPU_V7
select SYS_FSL_HAS_SEC if SECURE_BOOT
select SYS_FSL_SEC_COMPAT_4
select SYS_FSL_SEC_LE
select SYS_THUMB_BUILD if SPL
if ARCH_MX6
config SPL_LDSCRIPT
default "arch/arm/mach-omap2/u-boot-spl.lds"
endif
config ARCH_MX5
bool "Freescale MX5"
select CPU_V7
select BOARD_EARLY_INIT_F
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
select DM
select DM_SERIAL
select BOARD_EARLY_INIT_F
imply FAT_WRITE
imply SYS_THUMB_BUILD
config TARGET_S32V234EVB
bool "Support s32v234evb"
select ARM64
select SYS_FSL_ERRATUM_ESDHC111
config ARCH_SNAPDRAGON
bool "Qualcomm Snapdragon SoCs"
select ARM64
select DM
select DM_GPIO
select DM_SERIAL
select SPMI
select OF_CONTROL
select OF_SEPARATE
config ARCH_SOCFPGA
bool "Altera SOCFPGA family"
select CPU_V7
select SUPPORT_SPL
select OF_CONTROL
select SPL_OF_CONTROL
select DM
select DM_SPI_FLASH
select DM_SPI
select ENABLE_ARM_SOC_BOOT0_HOOK
select ARCH_EARLY_INIT_R
select ARCH_MISC_INIT
select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
select SYS_THUMB_BUILD
imply CMD_MTDPARTS
imply CRC32_VERIFY
imply FAT_WRITE
config ARCH_SUNXI
bool "Support sunxi (Allwinner) SoCs"
select CMD_GPIO
select CMD_MMC if MMC
select CMD_USB if DISTRO_DEFAULTS
select DM
select DM_ETH
select DM_GPIO
select DM_KEYBOARD
select DM_SERIAL
select DM_USB if DISTRO_DEFAULTS
select OF_BOARD_SETUP
select OF_CONTROL
select OF_SEPARATE
select SPL_STACK_R if SPL
select SPL_SYS_MALLOC_SIMPLE if SPL
select SYS_NS16550
select SPL_SYS_THUMB_BUILD if !ARM64
select USB if DISTRO_DEFAULTS
select USB_STORAGE if DISTRO_DEFAULTS
select USB_KEYBOARD if DISTRO_DEFAULTS
select USE_TINY_PRINTF
imply CMD_GPT
imply FAT_WRITE
imply PRE_CONSOLE_BUFFER
imply SPL_GPIO_SUPPORT
imply SPL_LIBCOMMON_SUPPORT
imply SPL_LIBDISK_SUPPORT
imply SPL_LIBGENERIC_SUPPORT
imply SPL_MMC_SUPPORT if MMC
imply SPL_POWER_SUPPORT
imply SPL_SERIAL_SUPPORT
imply USB_GADGET
config TARGET_TS4600
bool "Support TS4600"
select CPU_ARM926EJS
select SUPPORT_SPL
config ARCH_VF610
bool "Freescale Vybrid"
select CPU_V7
select SYS_FSL_ERRATUM_ESDHC111
imply CMD_MTDPARTS
imply NAND
config ARCH_ZYNQ
bool "Xilinx Zynq Platform"
select BOARD_LATE_INIT
select CPU_V7
select SUPPORT_SPL
select OF_CONTROL
select SPL_BOARD_INIT if SPL
select SPL_OF_CONTROL if SPL
select DM
select DM_ETH
select DM_GPIO
select SPL_DM if SPL
select DM_MMC
select DM_SPI
select DM_SERIAL
select DM_SPI_FLASH
select SPL_SEPARATE_BSS if SPL
select DM_USB if USB
select BLK
select CLK
select SPL_CLK
select CLK_ZYNQ
imply CMD_CLK
imply FAT_WRITE
imply CMD_SPL
config ARCH_ZYNQMP
bool "Support Xilinx ZynqMP Platform"
select ARM64
select BOARD_LATE_INIT
select DM
select OF_CONTROL
select DM_SERIAL
select SUPPORT_SPL
select CLK
select SPL_BOARD_INIT if SPL
select SPL_CLK
select DM_USB if USB
imply FAT_WRITE
config TEGRA
bool "NVIDIA Tegra"
imply FAT_WRITE
config TARGET_VEXPRESS64_AEMV8A
bool "Support vexpress_aemv8a"
select ARM64
config TARGET_VEXPRESS64_BASE_FVP
bool "Support Versatile Express ARMv8a FVP BASE model"
select ARM64
select SEMIHOSTING
config TARGET_VEXPRESS64_BASE_FVP_DRAM
bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
select ARM64
help
This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
the default config to allow the user to load the images directly into
DRAM using model parameters rather than by using semi-hosting to load
the files from the host filesystem.
config TARGET_VEXPRESS64_JUNO
bool "Support Versatile Express Juno Development Platform"
select ARM64
config TARGET_LS2080A_EMU
bool "Support ls2080a_emu"
select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
select ARCH_MISC_INIT
help
Support for Freescale LS2080A_EMU platform
The LS2080A Development System (EMULATOR) is a pre silicon
development platform that supports the QorIQ LS2080A
Layerscape Architecture processor.
config TARGET_LS2080A_SIMU
bool "Support ls2080a_simu"
select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
select ARCH_MISC_INIT
help
Support for Freescale LS2080A_SIMU platform
The LS2080A Development System (QDS) is a pre silicon
development platform that supports the QorIQ LS2080A
Layerscape Architecture processor.
config TARGET_LS1088AQDS
bool "Support ls1088aqds"
select ARCH_LS1088A
select ARM64
select ARMV8_MULTIENTRY
select ARCH_MISC_INIT
select BOARD_LATE_INIT
help
Support for NXP LS1088AQDS platform
The LS1088A Development System (QDS) is a high-performance
development platform that supports the QorIQ LS1088A
Layerscape Architecture processor.
config TARGET_LS2080AQDS
bool "Support ls2080aqds"
select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
select ARCH_MISC_INIT
imply SCSI
help
Support for Freescale LS2080AQDS platform
The LS2080A Development System (QDS) is a high-performance
development platform that supports the QorIQ LS2080A
Layerscape Architecture processor.
config TARGET_LS2080ARDB
bool "Support ls2080ardb"
select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
select ARCH_MISC_INIT
imply SCSI
help
Support for Freescale LS2080ARDB platform.
The LS2080A Reference design board (RDB) is a high-performance
development platform that supports the QorIQ LS2080A
Layerscape Architecture processor.
config TARGET_LS2081ARDB
bool "Support ls2081ardb"
select ARCH_LS2080A
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
select ARCH_MISC_INIT
help
Support for Freescale LS2081ARDB platform.
The LS2081A Reference design board (RDB) is a high-performance
development platform that supports the QorIQ LS2081A/LS2041A
Layerscape Architecture processor.
config TARGET_HIKEY
bool "Support HiKey 96boards Consumer Edition Platform"
select ARM64
select DM
select DM_GPIO
select DM_SERIAL
select OF_CONTROL
help
Support for HiKey 96boards platform. It features a HI6220
SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
config TARGET_POPLAR
bool "Support Poplar 96boards Enterprise Edition Platform"
select ARM64
select DM
select OF_CONTROL
select DM_SERIAL
select DM_USB
help
Support for Poplar 96boards EE platform. It features a HI3798cv200
SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
making it capable of running any commercial set-top solution based on
Linux or Android.
config TARGET_LS1012AQDS
bool "Support ls1012aqds"
select ARCH_LS1012A
select ARM64
select BOARD_LATE_INIT
help
Support for Freescale LS1012AQDS platform.
The LS1012A Development System (QDS) is a high-performance
development platform that supports the QorIQ LS1012A
Layerscape Architecture processor.
config TARGET_LS1012ARDB
bool "Support ls1012ardb"
select ARCH_LS1012A
select ARM64
select BOARD_LATE_INIT
imply SCSI
help
Support for Freescale LS1012ARDB platform.
The LS1012A Reference design board (RDB) is a high-performance
development platform that supports the QorIQ LS1012A
Layerscape Architecture processor.
config TARGET_LS1012AFRDM
bool "Support ls1012afrdm"
select ARCH_LS1012A
select ARM64
help
Support for Freescale LS1012AFRDM platform.
The LS1012A Freedom board (FRDM) is a high-performance
development platform that supports the QorIQ LS1012A
Layerscape Architecture processor.
config TARGET_LS1088ARDB
bool "Support ls1088ardb"
select ARCH_LS1088A
select ARM64
select ARMV8_MULTIENTRY
select ARCH_MISC_INIT
select BOARD_LATE_INIT
help
Support for NXP LS1088ARDB platform.
The LS1088A Reference design board (RDB) is a high-performance
development platform that supports the QorIQ LS1088A
Layerscape Architecture processor.
config TARGET_LS1021AQDS
bool "Support ls1021aqds"
select BOARD_LATE_INIT
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select SUPPORT_SPL
select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
select SYS_FSL_DDR
select BOARD_EARLY_INIT_F
imply SCSI
config TARGET_LS1021ATWR
bool "Support ls1021atwr"
select BOARD_LATE_INIT
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select SUPPORT_SPL
select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
select LS1_DEEP_SLEEP
select BOARD_EARLY_INIT_F
imply SCSI
config TARGET_LS1021AIOT
bool "Support ls1021aiot"
select BOARD_LATE_INIT
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select SUPPORT_SPL
select ARCH_LS1021A
select ARCH_SUPPORT_PSCI
imply SCSI
help
Support for Freescale LS1021AIOT platform.
The LS1021A Freescale board (IOT) is a high-performance
development platform that supports the QorIQ LS1021A
Layerscape Architecture processor.
config TARGET_LS1043AQDS
bool "Support ls1043aqds"
select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
imply SCSI
help
Support for Freescale LS1043AQDS platform.
config TARGET_LS1043ARDB
bool "Support ls1043ardb"
select ARCH_LS1043A
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
select BOARD_EARLY_INIT_F
imply SCSI
help
Support for Freescale LS1043ARDB platform.
config TARGET_LS1046AQDS
bool "Support ls1046aqds"
select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM_SPI_FLASH if DM_SPI
select BOARD_EARLY_INIT_F
imply SCSI
help
Support for Freescale LS1046AQDS platform.
The LS1046A Development System (QDS) is a high-performance
development platform that supports the QorIQ LS1046A
Layerscape Architecture processor.
config TARGET_LS1046ARDB
bool "Support ls1046ardb"
select ARCH_LS1046A
select ARM64
select ARMV8_MULTIENTRY
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM_SPI_FLASH if DM_SPI
select POWER_MC34VR500
select BOARD_EARLY_INIT_F
imply SCSI
help
Support for Freescale LS1046ARDB platform.
The LS1046A Reference Design Board (RDB) is a high-performance
development platform that supports the QorIQ LS1046A
Layerscape Architecture processor.
config TARGET_H2200
bool "Support h2200"
select CPU_PXA
config TARGET_ZIPITZ2
bool "Support zipitz2"
select CPU_PXA
config TARGET_COLIBRI_PXA270
bool "Support colibri_pxa270"
select CPU_PXA
config ARCH_UNIPHIER
bool "Socionext UniPhier SoCs"
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_RESET
select DM_SERIAL
select DM_USB
select OF_CONTROL
select OF_LIBFDT
select PINCTRL
select SPL_BOARD_INIT if SPL
select SPL_DM if SPL
select SPL_LIBCOMMON_SUPPORT if SPL
select SPL_LIBGENERIC_SUPPORT if SPL
select SPL_OF_CONTROL if SPL
select SPL_PINCTRL if SPL
select SUPPORT_SPL
imply FAT_WRITE
help
Support for UniPhier SoC family developed by Socionext Inc.
(formerly, System LSI Business Division of Panasonic Corporation)
config STM32
bool "Support STM32"
select CPU_V7M
select DM
select DM_SERIAL
select SYS_THUMB_BUILD
config ARCH_STI
bool "Support STMicrolectronics SoCs"
select CPU_V7
select DM
select DM_SERIAL
select BLK
select DM_MMC
select DM_RESET
help
Support for STMicroelectronics STiH407/10 SoC family.
This SoC is used on Linaro 96Board STiH410-B2260
config ARCH_ROCKCHIP
bool "Support Rockchip SoCs"
select OF_CONTROL
select BLK
select DM
select SPL_DM if SPL
select SYS_MALLOC_F
select SYS_THUMB_BUILD if !ARM64
select SPL_SYS_MALLOC_SIMPLE if SPL
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
select DM_USB if USB
select DM_PWM
select DM_REGULATOR
imply CMD_FASTBOOT
imply FASTBOOT
imply FAT_WRITE
imply USB_FUNCTION_FASTBOOT
imply SPL_SYSRESET
imply TPL_SYSRESET
imply ADC
imply SARADC_ROCKCHIP
config TARGET_THUNDERX_88XX
bool "Support ThunderX 88xx"
select ARM64
select OF_CONTROL
select SYS_CACHE_SHIFT_7
config ARCH_ASPEED
bool "Support Aspeed SoCs"
select OF_CONTROL
select DM
endchoice
source "arch/arm/mach-aspeed/Kconfig"
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcm283x/Kconfig"
source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-exynos/Kconfig"
source "arch/arm/mach-highbank/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
source "arch/arm/mach-keystone/Kconfig"
source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/mach-mvebu/Kconfig"
source "arch/arm/cpu/armv7/ls102xa/Kconfig"
source "arch/arm/mach-imx/mx7ulp/Kconfig"
source "arch/arm/mach-imx/mx7/Kconfig"
source "arch/arm/mach-imx/mx6/Kconfig"
source "arch/arm/mach-imx/mx5/Kconfig"
source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
source "arch/arm/mach-orion5x/Kconfig"
source "arch/arm/mach-rmobile/Kconfig"
source "arch/arm/mach-meson/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
source "arch/arm/mach-s5pc1xx/Kconfig"
source "arch/arm/mach-snapdragon/Kconfig"
source "arch/arm/mach-socfpga/Kconfig"
source "arch/arm/mach-sti/Kconfig"
source "arch/arm/mach-stm32/Kconfig"
source "arch/arm/mach-sunxi/Kconfig"
source "arch/arm/mach-tegra/Kconfig"
source "arch/arm/mach-uniphier/Kconfig"
source "arch/arm/cpu/armv7/vf610/Kconfig"
source "arch/arm/mach-zynq/Kconfig"
source "arch/arm/cpu/armv7/Kconfig"
source "arch/arm/cpu/armv8/zynqmp/Kconfig"
source "arch/arm/cpu/armv8/Kconfig"
source "arch/arm/mach-imx/Kconfig"
source "board/aries/m28evk/Kconfig"
source "board/bosch/shc/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
source "board/Marvell/aspenite/Kconfig"
source "board/Marvell/gplugd/Kconfig"
source "board/armadeus/apf27/Kconfig"
source "board/armltd/vexpress/Kconfig"
source "board/armltd/vexpress64/Kconfig"
source "board/bluegiga/apx4devkit/Kconfig"
source "board/broadcom/bcm23550_w1d/Kconfig"
source "board/broadcom/bcm28155_ap/Kconfig"
source "board/broadcom/bcmcygnus/Kconfig"
source "board/broadcom/bcmnsp/Kconfig"
source "board/broadcom/bcmns2/Kconfig"
source "board/cavium/thunderx/Kconfig"
source "board/cirrus/edb93xx/Kconfig"
source "board/creative/xfi3/Kconfig"
source "board/freescale/ls2080a/Kconfig"
source "board/freescale/ls2080aqds/Kconfig"
source "board/freescale/ls2080ardb/Kconfig"
source "board/freescale/ls1088a/Kconfig"
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1043aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
source "board/freescale/ls1021aiot/Kconfig"
source "board/freescale/ls1046aqds/Kconfig"
source "board/freescale/ls1043ardb/Kconfig"
source "board/freescale/ls1046ardb/Kconfig"
source "board/freescale/ls1012aqds/Kconfig"
source "board/freescale/ls1012ardb/Kconfig"
source "board/freescale/ls1012afrdm/Kconfig"
source "board/freescale/mx23evk/Kconfig"
source "board/freescale/mx25pdk/Kconfig"
source "board/freescale/mx28evk/Kconfig"
source "board/freescale/mx31ads/Kconfig"
source "board/freescale/mx31pdk/Kconfig"
source "board/freescale/mx35pdk/Kconfig"
source "board/freescale/s32v234evb/Kconfig"
source "board/gdsys/a38x/Kconfig"
source "board/grinn/chiliboard/Kconfig"
source "board/gumstix/pepper/Kconfig"
source "board/h2200/Kconfig"
source "board/hisilicon/hikey/Kconfig"
source "board/hisilicon/poplar/Kconfig"
source "board/imx31_phycore/Kconfig"
source "board/isee/igep003x/Kconfig"
source "board/olimex/mx23_olinuxino/Kconfig"
source "board/phytec/pcm051/Kconfig"
source "board/ppcag/bg0900/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
source "board/schulercontrol/sc_sps_1/Kconfig"
source "board/silica/pengwyn/Kconfig"
source "board/spear/spear300/Kconfig"
source "board/spear/spear310/Kconfig"
source "board/spear/spear320/Kconfig"
source "board/spear/spear600/Kconfig"
source "board/spear/x600/Kconfig"
source "board/st/stv0991/Kconfig"
source "board/syteco/zmx25/Kconfig"
source "board/tcl/sl50/Kconfig"
source "board/birdland/bav335x/Kconfig"
source "board/timll/devkit3250/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig"
source "board/technologic/ts4600/Kconfig"
source "board/vscom/baltos/Kconfig"
source "board/woodburn/Kconfig"
source "board/work-microwave/work_92105/Kconfig"
source "board/zipitz2/Kconfig"
source "arch/arm/Kconfig.debug"
endmenu
config SPL_LDSCRIPT
default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64