| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Ethernet driver for TI K2HK EVM. |
| * |
| * (C) Copyright 2012-2014 |
| * Texas Instruments Incorporated, <www.ti.com> |
| */ |
| #include <common.h> |
| #include <command.h> |
| #include <console.h> |
| #include <asm/global_data.h> |
| #include <linux/delay.h> |
| |
| #include <dm.h> |
| #include <dm/lists.h> |
| |
| #include <net.h> |
| #include <phy.h> |
| #include <errno.h> |
| #include <miiphy.h> |
| #include <malloc.h> |
| #include <asm/ti-common/keystone_nav.h> |
| #include <asm/ti-common/keystone_net.h> |
| #include <asm/ti-common/keystone_serdes.h> |
| #include <asm/arch/psc_defs.h> |
| #include <linux/libfdt.h> |
| |
| #include "cpsw_mdio.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifdef KEYSTONE2_EMAC_GIG_ENABLE |
| #define emac_gigabit_enable(x) keystone2_eth_gigabit_enable(x) |
| #else |
| #define emac_gigabit_enable(x) /* no gigabit to enable */ |
| #endif |
| |
| #define RX_BUFF_NUMS 24 |
| #define RX_BUFF_LEN 1520 |
| #define MAX_SIZE_STREAM_BUFFER RX_BUFF_LEN |
| #define SGMII_ANEG_TIMEOUT 4000 |
| |
| static u8 rx_buffs[RX_BUFF_NUMS * RX_BUFF_LEN] __aligned(16); |
| |
| enum link_type { |
| LINK_TYPE_SGMII_MAC_TO_MAC_AUTO = 0, |
| LINK_TYPE_SGMII_MAC_TO_PHY_MODE = 1, |
| LINK_TYPE_SGMII_MAC_TO_MAC_FORCED_MODE = 2, |
| LINK_TYPE_SGMII_MAC_TO_FIBRE_MODE = 3, |
| LINK_TYPE_SGMII_MAC_TO_PHY_NO_MDIO_MODE = 4, |
| LINK_TYPE_RGMII_LINK_MAC_PHY = 5, |
| LINK_TYPE_RGMII_LINK_MAC_MAC_FORCED = 6, |
| LINK_TYPE_RGMII_LINK_MAC_PHY_NO_MDIO = 7, |
| LINK_TYPE_10G_MAC_TO_PHY_MODE = 10, |
| LINK_TYPE_10G_MAC_TO_MAC_FORCED_MODE = 11, |
| }; |
| |
| #define mac_hi(mac) (((mac)[0] << 0) | ((mac)[1] << 8) | \ |
| ((mac)[2] << 16) | ((mac)[3] << 24)) |
| #define mac_lo(mac) (((mac)[4] << 0) | ((mac)[5] << 8)) |
| |
| #ifdef CONFIG_KSNET_NETCP_V1_0 |
| |
| #define EMAC_EMACSW_BASE_OFS 0x90800 |
| #define EMAC_EMACSW_PORT_BASE_OFS (EMAC_EMACSW_BASE_OFS + 0x60) |
| |
| /* CPSW Switch slave registers */ |
| #define CPGMACSL_REG_SA_LO 0x10 |
| #define CPGMACSL_REG_SA_HI 0x14 |
| |
| #define DEVICE_EMACSW_BASE(base, x) ((base) + EMAC_EMACSW_PORT_BASE_OFS + \ |
| (x) * 0x30) |
| |
| #elif defined(CONFIG_KSNET_NETCP_V1_5) |
| |
| #define EMAC_EMACSW_PORT_BASE_OFS 0x222000 |
| |
| /* CPSW Switch slave registers */ |
| #define CPGMACSL_REG_SA_LO 0x308 |
| #define CPGMACSL_REG_SA_HI 0x30c |
| |
| #define DEVICE_EMACSW_BASE(base, x) ((base) + EMAC_EMACSW_PORT_BASE_OFS + \ |
| (x) * 0x1000) |
| |
| #endif |
| |
| |
| struct ks2_eth_priv { |
| struct udevice *dev; |
| struct phy_device *phydev; |
| struct mii_dev *mdio_bus; |
| int phy_addr; |
| phy_interface_t phy_if; |
| int phy_of_handle; |
| int sgmii_link_type; |
| void *mdio_base; |
| struct rx_buff_desc net_rx_buffs; |
| struct pktdma_cfg *netcp_pktdma; |
| void *hd; |
| int slave_port; |
| enum link_type link_type; |
| bool emac_open; |
| bool has_mdio; |
| }; |
| |
| static void __attribute__((unused)) |
| keystone2_eth_gigabit_enable(struct udevice *dev) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| |
| /* |
| * Check if link detected is giga-bit |
| * If Gigabit mode detected, enable gigbit in MAC |
| */ |
| if (priv->has_mdio) { |
| if (priv->phydev->speed != 1000) |
| return; |
| } |
| |
| writel(readl(DEVICE_EMACSL_BASE(priv->slave_port - 1) + |
| CPGMACSL_REG_CTL) | |
| EMAC_MACCONTROL_GIGFORCE | EMAC_MACCONTROL_GIGABIT_ENABLE, |
| DEVICE_EMACSL_BASE(priv->slave_port - 1) + CPGMACSL_REG_CTL); |
| } |
| |
| #ifdef CONFIG_SOC_K2G |
| int keystone_rgmii_config(struct phy_device *phy_dev) |
| { |
| unsigned int i, status; |
| |
| i = 0; |
| do { |
| if (i > SGMII_ANEG_TIMEOUT) { |
| puts(" TIMEOUT !\n"); |
| phy_dev->link = 0; |
| return 0; |
| } |
| |
| if (ctrlc()) { |
| puts("user interrupt!\n"); |
| phy_dev->link = 0; |
| return -EINTR; |
| } |
| |
| if ((i++ % 500) == 0) |
| printf("."); |
| |
| udelay(1000); /* 1 ms */ |
| status = readl(RGMII_STATUS_REG); |
| } while (!(status & RGMII_REG_STATUS_LINK)); |
| |
| puts(" done\n"); |
| |
| return 0; |
| } |
| #else |
| int keystone_sgmii_config(struct phy_device *phy_dev, int port, int interface) |
| { |
| unsigned int i, status, mask; |
| unsigned int mr_adv_ability, control; |
| |
| switch (interface) { |
| case SGMII_LINK_MAC_MAC_AUTONEG: |
| mr_adv_ability = (SGMII_REG_MR_ADV_ENABLE | |
| SGMII_REG_MR_ADV_LINK | |
| SGMII_REG_MR_ADV_FULL_DUPLEX | |
| SGMII_REG_MR_ADV_GIG_MODE); |
| control = (SGMII_REG_CONTROL_MASTER | |
| SGMII_REG_CONTROL_AUTONEG); |
| |
| break; |
| case SGMII_LINK_MAC_PHY: |
| case SGMII_LINK_MAC_PHY_FORCED: |
| mr_adv_ability = SGMII_REG_MR_ADV_ENABLE; |
| control = SGMII_REG_CONTROL_AUTONEG; |
| |
| break; |
| case SGMII_LINK_MAC_MAC_FORCED: |
| mr_adv_ability = (SGMII_REG_MR_ADV_ENABLE | |
| SGMII_REG_MR_ADV_LINK | |
| SGMII_REG_MR_ADV_FULL_DUPLEX | |
| SGMII_REG_MR_ADV_GIG_MODE); |
| control = SGMII_REG_CONTROL_MASTER; |
| |
| break; |
| case SGMII_LINK_MAC_FIBER: |
| mr_adv_ability = 0x20; |
| control = SGMII_REG_CONTROL_AUTONEG; |
| |
| break; |
| default: |
| mr_adv_ability = SGMII_REG_MR_ADV_ENABLE; |
| control = SGMII_REG_CONTROL_AUTONEG; |
| } |
| |
| __raw_writel(0, SGMII_CTL_REG(port)); |
| |
| /* |
| * Wait for the SerDes pll to lock, |
| * but don't trap if lock is never read |
| */ |
| for (i = 0; i < 1000; i++) { |
| udelay(2000); |
| status = __raw_readl(SGMII_STATUS_REG(port)); |
| if ((status & SGMII_REG_STATUS_LOCK) != 0) |
| break; |
| } |
| |
| __raw_writel(mr_adv_ability, SGMII_MRADV_REG(port)); |
| __raw_writel(control, SGMII_CTL_REG(port)); |
| |
| |
| mask = SGMII_REG_STATUS_LINK; |
| |
| if (control & SGMII_REG_CONTROL_AUTONEG) |
| mask |= SGMII_REG_STATUS_AUTONEG; |
| |
| status = __raw_readl(SGMII_STATUS_REG(port)); |
| if ((status & mask) == mask) |
| return 0; |
| |
| printf("\n%s Waiting for SGMII auto negotiation to complete", |
| phy_dev->dev->name); |
| while ((status & mask) != mask) { |
| /* |
| * Timeout reached ? |
| */ |
| if (i > SGMII_ANEG_TIMEOUT) { |
| puts(" TIMEOUT !\n"); |
| phy_dev->link = 0; |
| return 0; |
| } |
| |
| if (ctrlc()) { |
| puts("user interrupt!\n"); |
| phy_dev->link = 0; |
| return -EINTR; |
| } |
| |
| if ((i++ % 500) == 0) |
| printf("."); |
| |
| udelay(1000); /* 1 ms */ |
| status = __raw_readl(SGMII_STATUS_REG(port)); |
| } |
| puts(" done\n"); |
| |
| return 0; |
| } |
| #endif |
| |
| int mac_sl_reset(u32 port) |
| { |
| u32 i, v; |
| |
| if (port >= DEVICE_N_GMACSL_PORTS) |
| return GMACSL_RET_INVALID_PORT; |
| |
| /* Set the soft reset bit */ |
| writel(CPGMAC_REG_RESET_VAL_RESET, |
| DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET); |
| |
| /* Wait for the bit to clear */ |
| for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) { |
| v = readl(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET); |
| if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) != |
| CPGMAC_REG_RESET_VAL_RESET) |
| return GMACSL_RET_OK; |
| } |
| |
| /* Timeout on the reset */ |
| return GMACSL_RET_WARN_RESET_INCOMPLETE; |
| } |
| |
| int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg) |
| { |
| u32 v, i; |
| int ret = GMACSL_RET_OK; |
| |
| if (port >= DEVICE_N_GMACSL_PORTS) |
| return GMACSL_RET_INVALID_PORT; |
| |
| if (cfg->max_rx_len > CPGMAC_REG_MAXLEN_LEN) { |
| cfg->max_rx_len = CPGMAC_REG_MAXLEN_LEN; |
| ret = GMACSL_RET_WARN_MAXLEN_TOO_BIG; |
| } |
| |
| /* Must wait if the device is undergoing reset */ |
| for (i = 0; i < DEVICE_EMACSL_RESET_POLL_COUNT; i++) { |
| v = readl(DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RESET); |
| if ((v & CPGMAC_REG_RESET_VAL_RESET_MASK) != |
| CPGMAC_REG_RESET_VAL_RESET) |
| break; |
| } |
| |
| if (i == DEVICE_EMACSL_RESET_POLL_COUNT) |
| return GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE; |
| |
| writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN); |
| writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL); |
| |
| #ifndef CONFIG_SOC_K2HK |
| /* Map RX packet flow priority to 0 */ |
| writel(0, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RX_PRI_MAP); |
| #endif |
| |
| return ret; |
| } |
| |
| int ethss_config(u32 ctl, u32 max_pkt_size) |
| { |
| u32 i; |
| |
| /* Max length register */ |
| writel(max_pkt_size, DEVICE_CPSW_BASE + CPSW_REG_MAXLEN); |
| |
| /* Control register */ |
| writel(ctl, DEVICE_CPSW_BASE + CPSW_REG_CTL); |
| |
| /* All statistics enabled by default */ |
| writel(CPSW_REG_VAL_STAT_ENABLE_ALL, |
| DEVICE_CPSW_BASE + CPSW_REG_STAT_PORT_EN); |
| |
| /* Reset and enable the ALE */ |
| writel(CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE | |
| CPSW_REG_VAL_ALE_CTL_BYPASS, |
| DEVICE_CPSW_BASE + CPSW_REG_ALE_CONTROL); |
| |
| /* All ports put into forward mode */ |
| for (i = 0; i < DEVICE_CPSW_NUM_PORTS; i++) |
| writel(CPSW_REG_VAL_PORTCTL_FORWARD_MODE, |
| DEVICE_CPSW_BASE + CPSW_REG_ALE_PORTCTL(i)); |
| |
| return 0; |
| } |
| |
| int ethss_start(void) |
| { |
| int i; |
| struct mac_sl_cfg cfg; |
| |
| cfg.max_rx_len = MAX_SIZE_STREAM_BUFFER; |
| cfg.ctl = GMACSL_ENABLE | GMACSL_RX_ENABLE_EXT_CTL; |
| |
| for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++) { |
| mac_sl_reset(i); |
| mac_sl_config(i, &cfg); |
| } |
| |
| return 0; |
| } |
| |
| int ethss_stop(void) |
| { |
| int i; |
| |
| for (i = 0; i < DEVICE_N_GMACSL_PORTS; i++) |
| mac_sl_reset(i); |
| |
| return 0; |
| } |
| |
| struct ks2_serdes ks2_serdes_sgmii_156p25mhz = { |
| .clk = SERDES_CLOCK_156P25M, |
| .rate = SERDES_RATE_5G, |
| .rate_mode = SERDES_QUARTER_RATE, |
| .intf = SERDES_PHY_SGMII, |
| .loopback = 0, |
| }; |
| |
| #ifndef CONFIG_SOC_K2G |
| static void keystone2_net_serdes_setup(void) |
| { |
| ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII_BASE, |
| &ks2_serdes_sgmii_156p25mhz, |
| CONFIG_KSNET_SERDES_LANES_PER_SGMII); |
| |
| #if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L) |
| ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII2_BASE, |
| &ks2_serdes_sgmii_156p25mhz, |
| CONFIG_KSNET_SERDES_LANES_PER_SGMII); |
| #endif |
| |
| /* wait till setup */ |
| udelay(5000); |
| } |
| #endif |
| |
| static int ks2_eth_start(struct udevice *dev) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| |
| #ifdef CONFIG_SOC_K2G |
| keystone_rgmii_config(priv->phydev); |
| #else |
| keystone_sgmii_config(priv->phydev, priv->slave_port - 1, |
| priv->sgmii_link_type); |
| #endif |
| |
| udelay(10000); |
| |
| /* On chip switch configuration */ |
| ethss_config(target_get_switch_ctl(), SWITCH_MAX_PKT_SIZE); |
| |
| qm_init(); |
| |
| if (ksnav_init(priv->netcp_pktdma, &priv->net_rx_buffs)) { |
| pr_err("ksnav_init failed\n"); |
| goto err_knav_init; |
| } |
| |
| /* |
| * Streaming switch configuration. If not present this |
| * statement is defined to void in target.h. |
| * If present this is usually defined to a series of register writes |
| */ |
| hw_config_streaming_switch(); |
| |
| if (priv->has_mdio) { |
| phy_startup(priv->phydev); |
| if (priv->phydev->link == 0) { |
| pr_err("phy startup failed\n"); |
| goto err_phy_start; |
| } |
| } |
| |
| emac_gigabit_enable(dev); |
| |
| ethss_start(); |
| |
| priv->emac_open = true; |
| |
| return 0; |
| |
| err_phy_start: |
| ksnav_close(priv->netcp_pktdma); |
| err_knav_init: |
| qm_close(); |
| |
| return -EFAULT; |
| } |
| |
| static int ks2_eth_send(struct udevice *dev, void *packet, int length) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| |
| genphy_update_link(priv->phydev); |
| if (priv->phydev->link == 0) |
| return -1; |
| |
| if (length < EMAC_MIN_ETHERNET_PKT_SIZE) |
| length = EMAC_MIN_ETHERNET_PKT_SIZE; |
| |
| return ksnav_send(priv->netcp_pktdma, (u32 *)packet, |
| length, (priv->slave_port) << 16); |
| } |
| |
| static int ks2_eth_recv(struct udevice *dev, int flags, uchar **packetp) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| int pkt_size; |
| u32 *pkt = NULL; |
| |
| priv->hd = ksnav_recv(priv->netcp_pktdma, &pkt, &pkt_size); |
| if (priv->hd == NULL) |
| return -EAGAIN; |
| |
| *packetp = (uchar *)pkt; |
| |
| return pkt_size; |
| } |
| |
| static int ks2_eth_free_pkt(struct udevice *dev, uchar *packet, |
| int length) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| |
| ksnav_release_rxhd(priv->netcp_pktdma, priv->hd); |
| |
| return 0; |
| } |
| |
| static void ks2_eth_stop(struct udevice *dev) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| |
| if (!priv->emac_open) |
| return; |
| ethss_stop(); |
| |
| ksnav_close(priv->netcp_pktdma); |
| qm_close(); |
| phy_shutdown(priv->phydev); |
| priv->emac_open = false; |
| } |
| |
| int ks2_eth_read_rom_hwaddr(struct udevice *dev) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| u32 maca = 0; |
| u32 macb = 0; |
| |
| /* Read the e-fuse mac address */ |
| if (priv->slave_port == 1) { |
| maca = __raw_readl(MAC_ID_BASE_ADDR); |
| macb = __raw_readl(MAC_ID_BASE_ADDR + 4); |
| } |
| |
| pdata->enetaddr[0] = (macb >> 8) & 0xff; |
| pdata->enetaddr[1] = (macb >> 0) & 0xff; |
| pdata->enetaddr[2] = (maca >> 24) & 0xff; |
| pdata->enetaddr[3] = (maca >> 16) & 0xff; |
| pdata->enetaddr[4] = (maca >> 8) & 0xff; |
| pdata->enetaddr[5] = (maca >> 0) & 0xff; |
| |
| return 0; |
| } |
| |
| int ks2_eth_write_hwaddr(struct udevice *dev) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| |
| writel(mac_hi(pdata->enetaddr), |
| DEVICE_EMACSW_BASE(pdata->iobase, priv->slave_port - 1) + |
| CPGMACSL_REG_SA_HI); |
| writel(mac_lo(pdata->enetaddr), |
| DEVICE_EMACSW_BASE(pdata->iobase, priv->slave_port - 1) + |
| CPGMACSL_REG_SA_LO); |
| |
| return 0; |
| } |
| |
| static int ks2_eth_probe(struct udevice *dev) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| struct mii_dev *mdio_bus; |
| |
| priv->dev = dev; |
| priv->emac_open = false; |
| |
| /* These clock enables has to be moved to common location */ |
| if (cpu_is_k2g()) |
| writel(KS2_ETHERNET_RGMII, KS2_ETHERNET_CFG); |
| |
| /* By default, select PA PLL clock as PA clock source */ |
| #ifndef CONFIG_SOC_K2G |
| if (psc_enable_module(KS2_LPSC_PA)) |
| return -EACCES; |
| #endif |
| if (psc_enable_module(KS2_LPSC_CPGMAC)) |
| return -EACCES; |
| if (psc_enable_module(KS2_LPSC_CRYPTO)) |
| return -EACCES; |
| |
| if (cpu_is_k2e() || cpu_is_k2l()) |
| pll_pa_clk_sel(); |
| |
| priv->net_rx_buffs.buff_ptr = rx_buffs; |
| priv->net_rx_buffs.num_buffs = RX_BUFF_NUMS; |
| priv->net_rx_buffs.buff_len = RX_BUFF_LEN; |
| |
| if (priv->slave_port == 1) { |
| #ifndef CONFIG_SOC_K2G |
| keystone2_net_serdes_setup(); |
| #endif |
| /* |
| * Register MDIO bus for slave 0 only, other slave have |
| * to re-use the same |
| */ |
| mdio_bus = cpsw_mdio_init("ethernet-mdio", |
| (u32)priv->mdio_base, |
| EMAC_MDIO_CLOCK_FREQ, |
| EMAC_MDIO_BUS_FREQ); |
| if (!mdio_bus) { |
| pr_err("MDIO alloc failed\n"); |
| return -ENOMEM; |
| } |
| priv->mdio_bus = mdio_bus; |
| } else { |
| /* Get the MDIO bus from slave 0 device */ |
| struct ks2_eth_priv *parent_priv; |
| |
| parent_priv = dev_get_priv(dev->parent); |
| priv->mdio_bus = parent_priv->mdio_bus; |
| priv->mdio_base = parent_priv->mdio_base; |
| } |
| |
| priv->netcp_pktdma = &netcp_pktdma; |
| |
| if (priv->has_mdio) { |
| priv->phydev = phy_connect(priv->mdio_bus, priv->phy_addr, |
| dev, priv->phy_if); |
| #ifdef CONFIG_DM_ETH |
| if (priv->phy_of_handle) |
| priv->phydev->node = offset_to_ofnode(priv->phy_of_handle); |
| #endif |
| phy_config(priv->phydev); |
| } |
| |
| return 0; |
| } |
| |
| int ks2_eth_remove(struct udevice *dev) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| |
| cpsw_mdio_free(priv->mdio_bus); |
| |
| return 0; |
| } |
| |
| static const struct eth_ops ks2_eth_ops = { |
| .start = ks2_eth_start, |
| .send = ks2_eth_send, |
| .recv = ks2_eth_recv, |
| .free_pkt = ks2_eth_free_pkt, |
| .stop = ks2_eth_stop, |
| .read_rom_hwaddr = ks2_eth_read_rom_hwaddr, |
| .write_hwaddr = ks2_eth_write_hwaddr, |
| }; |
| |
| static int ks2_eth_bind_slaves(struct udevice *dev, int gbe, int *gbe_0) |
| { |
| const void *fdt = gd->fdt_blob; |
| struct udevice *sl_dev; |
| int interfaces; |
| int sec_slave; |
| int slave; |
| int ret; |
| char *slave_name; |
| |
| interfaces = fdt_subnode_offset(fdt, gbe, "interfaces"); |
| fdt_for_each_subnode(slave, fdt, interfaces) { |
| int slave_no; |
| |
| slave_no = fdtdec_get_int(fdt, slave, "slave-port", -ENOENT); |
| if (slave_no == -ENOENT) |
| continue; |
| |
| if (slave_no == 0) { |
| /* This is the current eth device */ |
| *gbe_0 = slave; |
| } else { |
| /* Slave devices to be registered */ |
| slave_name = malloc(20); |
| snprintf(slave_name, 20, "netcp@slave-%d", slave_no); |
| ret = device_bind_driver_to_node(dev, "eth_ks2_sl", |
| slave_name, offset_to_ofnode(slave), |
| &sl_dev); |
| if (ret) { |
| pr_err("ks2_net - not able to bind slave interfaces\n"); |
| return ret; |
| } |
| } |
| } |
| |
| sec_slave = fdt_subnode_offset(fdt, gbe, "secondary-slave-ports"); |
| fdt_for_each_subnode(slave, fdt, sec_slave) { |
| int slave_no; |
| |
| slave_no = fdtdec_get_int(fdt, slave, "slave-port", -ENOENT); |
| if (slave_no == -ENOENT) |
| continue; |
| |
| /* Slave devices to be registered */ |
| slave_name = malloc(20); |
| snprintf(slave_name, 20, "netcp@slave-%d", slave_no); |
| ret = device_bind_driver_to_node(dev, "eth_ks2_sl", slave_name, |
| offset_to_ofnode(slave), &sl_dev); |
| if (ret) { |
| pr_err("ks2_net - not able to bind slave interfaces\n"); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int ks2_eth_parse_slave_interface(int netcp, int slave, |
| struct ks2_eth_priv *priv, |
| struct eth_pdata *pdata) |
| { |
| const void *fdt = gd->fdt_blob; |
| int mdio; |
| int phy; |
| int dma_count; |
| u32 dma_channel[8]; |
| |
| priv->slave_port = fdtdec_get_int(fdt, slave, "slave-port", -1); |
| priv->net_rx_buffs.rx_flow = priv->slave_port * 8; |
| |
| /* U-Boot slave port number starts with 1 instead of 0 */ |
| priv->slave_port += 1; |
| |
| dma_count = fdtdec_get_int_array_count(fdt, netcp, |
| "ti,navigator-dmas", |
| dma_channel, 8); |
| |
| if (dma_count > (2 * priv->slave_port)) { |
| int dma_idx; |
| |
| dma_idx = priv->slave_port * 2 - 1; |
| priv->net_rx_buffs.rx_flow = dma_channel[dma_idx]; |
| } |
| |
| priv->link_type = fdtdec_get_int(fdt, slave, "link-interface", -1); |
| |
| phy = fdtdec_lookup_phandle(fdt, slave, "phy-handle"); |
| |
| if (phy >= 0) { |
| priv->phy_of_handle = phy; |
| priv->phy_addr = fdtdec_get_int(fdt, phy, "reg", -1); |
| |
| mdio = fdt_parent_offset(fdt, phy); |
| if (mdio < 0) { |
| pr_err("mdio dt not found\n"); |
| return -ENODEV; |
| } |
| priv->mdio_base = (void *)fdtdec_get_addr(fdt, mdio, "reg"); |
| } |
| |
| if (priv->link_type == LINK_TYPE_SGMII_MAC_TO_PHY_MODE) { |
| priv->phy_if = PHY_INTERFACE_MODE_SGMII; |
| pdata->phy_interface = priv->phy_if; |
| priv->sgmii_link_type = SGMII_LINK_MAC_PHY; |
| priv->has_mdio = true; |
| } else if (priv->link_type == LINK_TYPE_RGMII_LINK_MAC_PHY) { |
| priv->phy_if = ofnode_read_phy_mode(offset_to_ofnode(slave)); |
| if (priv->phy_if == PHY_INTERFACE_MODE_NA) |
| priv->phy_if = PHY_INTERFACE_MODE_RGMII; |
| pdata->phy_interface = priv->phy_if; |
| |
| if (priv->phy_if != PHY_INTERFACE_MODE_RGMII && |
| priv->phy_if != PHY_INTERFACE_MODE_RGMII_ID && |
| priv->phy_if != PHY_INTERFACE_MODE_RGMII_RXID && |
| priv->phy_if != PHY_INTERFACE_MODE_RGMII_TXID) { |
| pr_err("invalid phy-mode\n"); |
| return -EINVAL; |
| } |
| |
| priv->has_mdio = true; |
| } |
| |
| return 0; |
| } |
| |
| static int ks2_sl_eth_of_to_plat(struct udevice *dev) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| const void *fdt = gd->fdt_blob; |
| int slave = dev_of_offset(dev); |
| int interfaces; |
| int gbe; |
| int netcp_devices; |
| int netcp; |
| |
| interfaces = fdt_parent_offset(fdt, slave); |
| gbe = fdt_parent_offset(fdt, interfaces); |
| netcp_devices = fdt_parent_offset(fdt, gbe); |
| netcp = fdt_parent_offset(fdt, netcp_devices); |
| |
| ks2_eth_parse_slave_interface(netcp, slave, priv, pdata); |
| |
| pdata->iobase = fdtdec_get_addr(fdt, netcp, "reg"); |
| |
| return 0; |
| } |
| |
| static int ks2_eth_of_to_plat(struct udevice *dev) |
| { |
| struct ks2_eth_priv *priv = dev_get_priv(dev); |
| struct eth_pdata *pdata = dev_get_plat(dev); |
| const void *fdt = gd->fdt_blob; |
| int gbe_0 = -ENODEV; |
| int netcp_devices; |
| int gbe; |
| |
| netcp_devices = fdt_subnode_offset(fdt, dev_of_offset(dev), |
| "netcp-devices"); |
| gbe = fdt_subnode_offset(fdt, netcp_devices, "gbe"); |
| |
| ks2_eth_bind_slaves(dev, gbe, &gbe_0); |
| |
| ks2_eth_parse_slave_interface(dev_of_offset(dev), gbe_0, priv, pdata); |
| |
| pdata->iobase = dev_read_addr(dev); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id ks2_eth_ids[] = { |
| { .compatible = "ti,netcp-1.0" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(eth_ks2_slave) = { |
| .name = "eth_ks2_sl", |
| .id = UCLASS_ETH, |
| .of_to_plat = ks2_sl_eth_of_to_plat, |
| .probe = ks2_eth_probe, |
| .remove = ks2_eth_remove, |
| .ops = &ks2_eth_ops, |
| .priv_auto = sizeof(struct ks2_eth_priv), |
| .plat_auto = sizeof(struct eth_pdata), |
| .flags = DM_FLAG_ALLOC_PRIV_DMA, |
| }; |
| |
| U_BOOT_DRIVER(eth_ks2) = { |
| .name = "eth_ks2", |
| .id = UCLASS_ETH, |
| .of_match = ks2_eth_ids, |
| .of_to_plat = ks2_eth_of_to_plat, |
| .probe = ks2_eth_probe, |
| .remove = ks2_eth_remove, |
| .ops = &ks2_eth_ops, |
| .priv_auto = sizeof(struct ks2_eth_priv), |
| .plat_auto = sizeof(struct eth_pdata), |
| .flags = DM_FLAG_ALLOC_PRIV_DMA, |
| }; |