| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2007 |
| * Sascha Hauer, Pengutronix |
| * |
| * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <common.h> |
| #include <clock_legacy.h> |
| #include <command.h> |
| #include <div64.h> |
| #include <init.h> |
| #include <net.h> |
| #include <asm/io.h> |
| #include <linux/errno.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/crm_regs.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sys_proto.h> |
| #ifdef CONFIG_FSL_ESDHC_IMX |
| #include <fsl_esdhc_imx.h> |
| #endif |
| #include <netdev.h> |
| #include <spl.h> |
| |
| #define CLK_CODE(arm, ahb, sel) (((arm) << 16) + ((ahb) << 8) + (sel)) |
| #define CLK_CODE_ARM(c) (((c) >> 16) & 0xFF) |
| #define CLK_CODE_AHB(c) (((c) >> 8) & 0xFF) |
| #define CLK_CODE_PATH(c) ((c) & 0xFF) |
| |
| #define CCM_GET_DIVIDER(x, m, o) (((x) & (m)) >> (o)) |
| |
| #ifdef CONFIG_FSL_ESDHC_IMX |
| DECLARE_GLOBAL_DATA_PTR; |
| #endif |
| |
| static int g_clk_mux_auto[8] = { |
| CLK_CODE(1, 3, 0), CLK_CODE(1, 2, 1), CLK_CODE(2, 1, 1), -1, |
| CLK_CODE(1, 6, 0), CLK_CODE(1, 4, 1), CLK_CODE(2, 2, 1), -1, |
| }; |
| |
| static int g_clk_mux_consumer[16] = { |
| CLK_CODE(1, 4, 0), CLK_CODE(1, 3, 1), CLK_CODE(1, 3, 1), -1, |
| -1, -1, CLK_CODE(4, 1, 0), CLK_CODE(1, 5, 0), |
| CLK_CODE(1, 8, 1), CLK_CODE(1, 6, 1), CLK_CODE(2, 4, 0), -1, |
| -1, -1, CLK_CODE(4, 2, 0), -1, |
| }; |
| |
| static int hsp_div_table[3][16] = { |
| {4, 3, 2, -1, -1, -1, 1, 5, 4, 3, 2, -1, -1, -1, 1, -1}, |
| {-1, -1, -1, -1, -1, -1, -1, -1, 8, 6, 4, -1, -1, -1, 2, -1}, |
| {3, -1, -1, -1, -1, -1, -1, -1, 3, -1, -1, -1, -1, -1, -1, -1}, |
| }; |
| |
| u32 get_cpu_rev(void) |
| { |
| int reg; |
| struct iim_regs *iim = |
| (struct iim_regs *)IIM_BASE_ADDR; |
| reg = readl(&iim->iim_srev); |
| if (!reg) { |
| reg = readw(ROMPATCH_REV); |
| reg <<= 4; |
| } else { |
| reg += CHIP_REV_1_0; |
| } |
| |
| return 0x35000 + (reg & 0xFF); |
| } |
| |
| static u32 get_arm_div(u32 pdr0, u32 *fi, u32 *fd) |
| { |
| int *pclk_mux; |
| if (pdr0 & MXC_CCM_PDR0_AUTO_CON) { |
| pclk_mux = g_clk_mux_consumer + |
| ((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >> |
| MXC_CCM_PDR0_CON_MUX_DIV_OFFSET); |
| } else { |
| pclk_mux = g_clk_mux_auto + |
| ((pdr0 & MXC_CCM_PDR0_AUTO_MUX_DIV_MASK) >> |
| MXC_CCM_PDR0_AUTO_MUX_DIV_OFFSET); |
| } |
| |
| if ((*pclk_mux) == -1) |
| return -1; |
| |
| if (fi && fd) { |
| if (!CLK_CODE_PATH(*pclk_mux)) { |
| *fi = *fd = 1; |
| return CLK_CODE_ARM(*pclk_mux); |
| } |
| if (pdr0 & MXC_CCM_PDR0_AUTO_CON) { |
| *fi = 3; |
| *fd = 4; |
| } else { |
| *fi = 2; |
| *fd = 3; |
| } |
| } |
| return CLK_CODE_ARM(*pclk_mux); |
| } |
| |
| static int get_ahb_div(u32 pdr0) |
| { |
| int *pclk_mux; |
| |
| pclk_mux = g_clk_mux_consumer + |
| ((pdr0 & MXC_CCM_PDR0_CON_MUX_DIV_MASK) >> |
| MXC_CCM_PDR0_CON_MUX_DIV_OFFSET); |
| |
| if ((*pclk_mux) == -1) |
| return -1; |
| |
| return CLK_CODE_AHB(*pclk_mux); |
| } |
| |
| static u32 decode_pll(u32 reg, u32 infreq) |
| { |
| u32 mfi = (reg >> 10) & 0xf; |
| s32 mfn = reg & 0x3ff; |
| u32 mfd = (reg >> 16) & 0x3ff; |
| u32 pd = (reg >> 26) & 0xf; |
| |
| mfi = mfi <= 5 ? 5 : mfi; |
| mfn = mfn >= 512 ? mfn - 1024 : mfn; |
| mfd += 1; |
| pd += 1; |
| |
| return lldiv(2 * (u64)infreq * (mfi * mfd + mfn), |
| mfd * pd); |
| } |
| |
| static u32 get_mcu_main_clk(void) |
| { |
| u32 arm_div = 0, fi = 0, fd = 0; |
| struct ccm_regs *ccm = |
| (struct ccm_regs *)IMX_CCM_BASE; |
| arm_div = get_arm_div(readl(&ccm->pdr0), &fi, &fd); |
| fi *= decode_pll(readl(&ccm->mpctl), MXC_HCLK); |
| return fi / (arm_div * fd); |
| } |
| |
| static u32 get_ipg_clk(void) |
| { |
| u32 freq = get_mcu_main_clk(); |
| struct ccm_regs *ccm = |
| (struct ccm_regs *)IMX_CCM_BASE; |
| u32 pdr0 = readl(&ccm->pdr0); |
| |
| return freq / (get_ahb_div(pdr0) * 2); |
| } |
| |
| static u32 get_ipg_per_clk(void) |
| { |
| u32 freq = get_mcu_main_clk(); |
| struct ccm_regs *ccm = |
| (struct ccm_regs *)IMX_CCM_BASE; |
| u32 pdr0 = readl(&ccm->pdr0); |
| u32 pdr4 = readl(&ccm->pdr4); |
| u32 div; |
| if (pdr0 & MXC_CCM_PDR0_PER_SEL) { |
| div = CCM_GET_DIVIDER(pdr4, |
| MXC_CCM_PDR4_PER0_PODF_MASK, |
| MXC_CCM_PDR4_PER0_PODF_OFFSET) + 1; |
| } else { |
| div = CCM_GET_DIVIDER(pdr0, |
| MXC_CCM_PDR0_PER_PODF_MASK, |
| MXC_CCM_PDR0_PER_PODF_OFFSET) + 1; |
| div *= get_ahb_div(pdr0); |
| } |
| return freq / div; |
| } |
| |
| u32 imx_get_uartclk(void) |
| { |
| u32 freq; |
| struct ccm_regs *ccm = |
| (struct ccm_regs *)IMX_CCM_BASE; |
| u32 pdr4 = readl(&ccm->pdr4); |
| |
| if (readl(&ccm->pdr3) & MXC_CCM_PDR3_UART_M_U) |
| freq = get_mcu_main_clk(); |
| else |
| freq = decode_pll(readl(&ccm->ppctl), MXC_HCLK); |
| freq /= CCM_GET_DIVIDER(pdr4, |
| MXC_CCM_PDR4_UART_PODF_MASK, |
| MXC_CCM_PDR4_UART_PODF_OFFSET) + 1; |
| return freq; |
| } |
| |
| unsigned int mxc_get_main_clock(enum mxc_main_clock clk) |
| { |
| u32 nfc_pdf, hsp_podf; |
| u32 pll, ret_val = 0, usb_podf; |
| struct ccm_regs *ccm = |
| (struct ccm_regs *)IMX_CCM_BASE; |
| |
| u32 reg = readl(&ccm->pdr0); |
| u32 reg4 = readl(&ccm->pdr4); |
| |
| reg |= 0x1; |
| |
| switch (clk) { |
| case CPU_CLK: |
| ret_val = get_mcu_main_clk(); |
| break; |
| case AHB_CLK: |
| ret_val = get_mcu_main_clk(); |
| break; |
| case HSP_CLK: |
| if (reg & CLKMODE_CONSUMER) { |
| hsp_podf = (reg >> 20) & 0x3; |
| pll = get_mcu_main_clk(); |
| hsp_podf = hsp_div_table[hsp_podf][(reg>>16)&0xF]; |
| if (hsp_podf > 0) { |
| ret_val = pll / hsp_podf; |
| } else { |
| puts("mismatch HSP with ARM clock setting\n"); |
| ret_val = 0; |
| } |
| } else { |
| ret_val = get_mcu_main_clk(); |
| } |
| break; |
| case IPG_CLK: |
| ret_val = get_ipg_clk(); |
| break; |
| case IPG_PER_CLK: |
| ret_val = get_ipg_per_clk(); |
| break; |
| case NFC_CLK: |
| nfc_pdf = (reg4 >> 28) & 0xF; |
| pll = get_mcu_main_clk(); |
| /* AHB/nfc_pdf */ |
| ret_val = pll / (nfc_pdf + 1); |
| break; |
| case USB_CLK: |
| usb_podf = (reg4 >> 22) & 0x3F; |
| if (reg4 & 0x200) |
| pll = get_mcu_main_clk(); |
| else |
| pll = decode_pll(readl(&ccm->ppctl), MXC_HCLK); |
| |
| ret_val = pll / (usb_podf + 1); |
| break; |
| default: |
| printf("Unknown clock: %d\n", clk); |
| break; |
| } |
| |
| return ret_val; |
| } |
| unsigned int mxc_get_peri_clock(enum mxc_peri_clock clk) |
| { |
| u32 ret_val = 0, pdf, pre_pdf, clk_sel; |
| struct ccm_regs *ccm = |
| (struct ccm_regs *)IMX_CCM_BASE; |
| u32 mpdr2 = readl(&ccm->pdr2); |
| u32 mpdr3 = readl(&ccm->pdr3); |
| u32 mpdr4 = readl(&ccm->pdr4); |
| |
| switch (clk) { |
| case UART1_BAUD: |
| case UART2_BAUD: |
| case UART3_BAUD: |
| clk_sel = mpdr3 & (1 << 14); |
| pdf = (mpdr4 >> 10) & 0x3F; |
| ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : |
| decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1); |
| break; |
| case SSI1_BAUD: |
| pre_pdf = (mpdr2 >> 24) & 0x7; |
| pdf = mpdr2 & 0x3F; |
| clk_sel = mpdr2 & (1 << 6); |
| ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : |
| decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / |
| ((pre_pdf + 1) * (pdf + 1)); |
| break; |
| case SSI2_BAUD: |
| pre_pdf = (mpdr2 >> 27) & 0x7; |
| pdf = (mpdr2 >> 8) & 0x3F; |
| clk_sel = mpdr2 & (1 << 6); |
| ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : |
| decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / |
| ((pre_pdf + 1) * (pdf + 1)); |
| break; |
| case CSI_BAUD: |
| clk_sel = mpdr2 & (1 << 7); |
| pdf = (mpdr2 >> 16) & 0x3F; |
| ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : |
| decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1); |
| break; |
| case MSHC_CLK: |
| pre_pdf = readl(&ccm->pdr1); |
| clk_sel = (pre_pdf & 0x80); |
| pdf = (pre_pdf >> 22) & 0x3F; |
| pre_pdf = (pre_pdf >> 28) & 0x7; |
| ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : |
| decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / |
| ((pre_pdf + 1) * (pdf + 1)); |
| break; |
| case ESDHC1_CLK: |
| clk_sel = mpdr3 & 0x40; |
| pdf = mpdr3 & 0x3F; |
| ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : |
| decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1); |
| break; |
| case ESDHC2_CLK: |
| clk_sel = mpdr3 & 0x40; |
| pdf = (mpdr3 >> 8) & 0x3F; |
| ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : |
| decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1); |
| break; |
| case ESDHC3_CLK: |
| clk_sel = mpdr3 & 0x40; |
| pdf = (mpdr3 >> 16) & 0x3F; |
| ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : |
| decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / (pdf + 1); |
| break; |
| case SPDIF_CLK: |
| clk_sel = mpdr3 & 0x400000; |
| pre_pdf = (mpdr3 >> 29) & 0x7; |
| pdf = (mpdr3 >> 23) & 0x3F; |
| ret_val = ((clk_sel != 0) ? mxc_get_main_clock(CPU_CLK) : |
| decode_pll(readl(&ccm->ppctl), MXC_HCLK)) / |
| ((pre_pdf + 1) * (pdf + 1)); |
| break; |
| default: |
| printf("%s(): This clock: %d not supported yet\n", |
| __func__, clk); |
| break; |
| } |
| |
| return ret_val; |
| } |
| |
| unsigned int mxc_get_clock(enum mxc_clock clk) |
| { |
| switch (clk) { |
| case MXC_ARM_CLK: |
| return get_mcu_main_clk(); |
| case MXC_AHB_CLK: |
| break; |
| case MXC_IPG_CLK: |
| return get_ipg_clk(); |
| case MXC_IPG_PERCLK: |
| case MXC_I2C_CLK: |
| return get_ipg_per_clk(); |
| case MXC_UART_CLK: |
| return imx_get_uartclk(); |
| case MXC_ESDHC1_CLK: |
| return mxc_get_peri_clock(ESDHC1_CLK); |
| case MXC_ESDHC2_CLK: |
| return mxc_get_peri_clock(ESDHC2_CLK); |
| case MXC_ESDHC3_CLK: |
| return mxc_get_peri_clock(ESDHC3_CLK); |
| case MXC_USB_CLK: |
| return mxc_get_main_clock(USB_CLK); |
| case MXC_FEC_CLK: |
| return get_ipg_clk(); |
| case MXC_CSPI_CLK: |
| return get_ipg_clk(); |
| } |
| return -1; |
| } |
| |
| #ifdef CONFIG_FEC_MXC |
| /* |
| * The MX35 has no fuse for MAC, return a NULL MAC |
| */ |
| void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) |
| { |
| memset(mac, 0, 6); |
| } |
| |
| u32 imx_get_fecclk(void) |
| { |
| return mxc_get_clock(MXC_IPG_CLK); |
| } |
| #endif |
| |
| int do_mx35_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| u32 cpufreq = get_mcu_main_clk(); |
| printf("mx35 cpu clock: %dMHz\n", cpufreq / 1000000); |
| printf("ipg clock : %dHz\n", get_ipg_clk()); |
| printf("ipg per clock : %dHz\n", get_ipg_per_clk()); |
| printf("uart clock : %dHz\n", mxc_get_clock(MXC_UART_CLK)); |
| |
| return 0; |
| } |
| |
| U_BOOT_CMD( |
| clocks, CONFIG_SYS_MAXARGS, 1, do_mx35_showclocks, |
| "display clocks", |
| "" |
| ); |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| static char *get_reset_cause(void) |
| { |
| /* read RCSR register from CCM module */ |
| struct ccm_regs *ccm = |
| (struct ccm_regs *)IMX_CCM_BASE; |
| |
| u32 cause = readl(&ccm->rcsr) & 0x0F; |
| |
| switch (cause) { |
| case 0x0000: |
| return "POR"; |
| case 0x0002: |
| return "JTAG"; |
| case 0x0004: |
| return "RST"; |
| case 0x0008: |
| return "WDOG"; |
| default: |
| return "unknown reset"; |
| } |
| } |
| |
| int print_cpuinfo(void) |
| { |
| u32 srev = get_cpu_rev(); |
| |
| printf("CPU: Freescale i.MX35 rev %d.%d at %d MHz.\n", |
| (srev & 0xF0) >> 4, (srev & 0x0F), |
| get_mcu_main_clk() / 1000000); |
| |
| printf("Reset cause: %s\n", get_reset_cause()); |
| |
| return 0; |
| } |
| #endif |
| |
| /* |
| * Initializes on-chip ethernet controllers. |
| * to override, implement board_eth_init() |
| */ |
| int cpu_eth_init(struct bd_info *bis) |
| { |
| int rc = -ENODEV; |
| |
| #if defined(CONFIG_FEC_MXC) |
| rc = fecmxc_initialize(bis); |
| #endif |
| |
| return rc; |
| } |
| |
| #ifdef CONFIG_FSL_ESDHC_IMX |
| /* |
| * Initializes on-chip MMC controllers. |
| * to override, implement board_mmc_init() |
| */ |
| int cpu_mmc_init(struct bd_info *bis) |
| { |
| return fsl_esdhc_mmc_init(bis); |
| } |
| #endif |
| |
| int get_clocks(void) |
| { |
| #ifdef CONFIG_FSL_ESDHC_IMX |
| #if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR |
| gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); |
| #elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR |
| gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); |
| #else |
| gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); |
| #endif |
| #endif |
| return 0; |
| } |
| |
| #define RCSR_MEM_CTL_WEIM 0 |
| #define RCSR_MEM_CTL_NAND 1 |
| #define RCSR_MEM_CTL_ATA 2 |
| #define RCSR_MEM_CTL_EXPANSION 3 |
| #define RCSR_MEM_TYPE_NOR 0 |
| #define RCSR_MEM_TYPE_ONENAND 2 |
| #define RCSR_MEM_TYPE_SD 0 |
| #define RCSR_MEM_TYPE_I2C 2 |
| #define RCSR_MEM_TYPE_SPI 3 |
| |
| u32 spl_boot_device(void) |
| { |
| struct ccm_regs *ccm = |
| (struct ccm_regs *)IMX_CCM_BASE; |
| |
| u32 rcsr = readl(&ccm->rcsr); |
| u32 mem_type, mem_ctl; |
| |
| /* In external mode, no boot device is returned */ |
| if ((rcsr >> 10) & 0x03) |
| return BOOT_DEVICE_NONE; |
| |
| mem_ctl = (rcsr >> 25) & 0x03; |
| mem_type = (rcsr >> 23) & 0x03; |
| |
| switch (mem_ctl) { |
| case RCSR_MEM_CTL_WEIM: |
| switch (mem_type) { |
| case RCSR_MEM_TYPE_NOR: |
| return BOOT_DEVICE_NOR; |
| case RCSR_MEM_TYPE_ONENAND: |
| return BOOT_DEVICE_ONENAND; |
| default: |
| return BOOT_DEVICE_NONE; |
| } |
| case RCSR_MEM_CTL_NAND: |
| return BOOT_DEVICE_NAND; |
| case RCSR_MEM_CTL_EXPANSION: |
| switch (mem_type) { |
| case RCSR_MEM_TYPE_SD: |
| return BOOT_DEVICE_MMC1; |
| case RCSR_MEM_TYPE_I2C: |
| return BOOT_DEVICE_I2C; |
| case RCSR_MEM_TYPE_SPI: |
| return BOOT_DEVICE_SPI; |
| default: |
| return BOOT_DEVICE_NONE; |
| } |
| } |
| |
| return BOOT_DEVICE_NONE; |
| } |