include/configs/nsa310s.h

/*
 * Copyright (C) 2015
 * Gerald Kerma <dreagle@doukki.net>
 * Tony Dinh <mibodhi@gmail.com>
 * Luka Perkov <luka.perkov@sartura.hr>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_NSA310S_H
#define _CONFIG_NSA310S_H

/* high level configuration options */
#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
#define CONFIG_KW88F6192		1	/* SOC Name */
#define CONFIG_KW88F6702		1	/* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/* add target to build it automatically upon "make" */
#define CONFIG_BUILD_TARGET		"u-boot.kwb"

/* compression configuration */
#define CONFIG_BZIP2
#define CONFIG_LZMA

/* commands configuration */
#define CONFIG_SYS_NO_FLASH		/* declare no flash (NOR/SPI) */
#define CONFIG_SYS_MVFS
#define CONFIG_CMD_IDE

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* environment variables configuration */
#ifdef CONFIG_CMD_NAND
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE	0x20000
#else
#define CONFIG_ENV_IS_NOWHERE
#endif
#define CONFIG_ENV_SIZE		0x20000
#define CONFIG_ENV_OFFSET	0xe0000

/* default environment variables */
#define CONFIG_BOOTCOMMAND \
	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
	"ubi part root; " \
	"ubifsmount ubi:rootfs; " \
	"ubifsload 0x800000 ${kernel}; " \
	"ubifsload 0x700000 ${fdt}; " \
	"ubifsumount; " \
	"fdt addr 0x700000; fdt resize; fdt chosen; " \
	"bootz 0x800000 - 0x700000"

#define CONFIG_MTDPARTS \
	"mtdparts=orion_nand:" \
	"0xe0000@0x0(uboot)," \
	"0x20000@0xe0000(uboot_env)," \
	"0x100000@0x100000(second_stage_uboot)," \
	"-@0x200000(root)\0"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"console=console=ttyS0,115200\0" \
	"mtdids=nand0=orion_nand\0" \
	"mtdparts="CONFIG_MTDPARTS \
	"kernel=/boot/zImage\0" \
	"fdt=/boot/nsa310s.dtb\0" \
	"bootargs_root=ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw\0"

/* Ethernet driver configuration */
#ifdef CONFIG_CMD_NET
#define CONFIG_NETCONSOLE
#define CONFIG_NET_MULTI
#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
#define CONFIG_PHY_BASE_ADR	1
#define CONFIG_PHY_GIGE
#define CONFIG_RESET_PHY_R
#endif /* CONFIG_CMD_NET */

/* SATA driver configuration */
#ifdef CONFIG_CMD_IDE
#define __io
#define CONFIG_IDE_PREINIT
#define CONFIG_MVSATA_IDE_USE_PORT0
#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
#endif /* CONFIG_CMD_IDE */

/* RTC driver configuration */
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_MV
#endif /* CONFIG_CMD_DATE */

#endif /* _CONFIG_NSA310S_H */