| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2019 Broadcom. |
| */ |
| #include <common.h> |
| #include <dm.h> |
| #include <regmap.h> |
| #include <syscon.h> |
| #include <asm/gic.h> |
| #include <asm/gic-v3.h> |
| #include <asm/io.h> |
| #include <linux/bitops.h> |
| #include <linux/sizes.h> |
| |
| static u32 lpi_id_bits; |
| |
| #define LPI_NRBITS lpi_id_bits |
| #define LPI_PROPBASE_SZ ALIGN(BIT(LPI_NRBITS), SZ_64K) |
| #define LPI_PENDBASE_SZ ALIGN(BIT(LPI_NRBITS) / 8, SZ_64K) |
| |
| /* Number of GIC re-distributors */ |
| #define MAX_GIC_REDISTRIBUTORS 8 |
| |
| /* |
| * gic_v3_its_priv - gic details |
| * |
| * @gicd_base: gicd base address |
| * @gicr_base: gicr base address |
| * @lpi_base: gic lpi base address |
| * @num_redist: number of gic re-distributors |
| */ |
| struct gic_v3_its_priv { |
| ulong gicd_base; |
| ulong gicr_base; |
| ulong lpi_base; |
| u32 num_redist; |
| }; |
| |
| static int gic_v3_its_get_gic_addr(struct gic_v3_its_priv *priv) |
| { |
| struct udevice *dev; |
| fdt_addr_t addr; |
| int ret; |
| |
| ret = uclass_get_device_by_driver(UCLASS_IRQ, |
| DM_DRIVER_GET(arm_gic_v3_its), &dev); |
| if (ret) { |
| pr_err("%s: failed to get %s irq device\n", __func__, |
| DM_DRIVER_GET(arm_gic_v3_its)->name); |
| return ret; |
| } |
| |
| addr = dev_read_addr_index(dev, 0); |
| if (addr == FDT_ADDR_T_NONE) { |
| pr_err("%s: failed to get GICD address\n", __func__); |
| return -EINVAL; |
| } |
| priv->gicd_base = addr; |
| |
| addr = dev_read_addr_index(dev, 1); |
| if (addr == FDT_ADDR_T_NONE) { |
| pr_err("%s: failed to get GICR address\n", __func__); |
| return -EINVAL; |
| } |
| priv->gicr_base = addr; |
| |
| return 0; |
| } |
| |
| static int gic_v3_its_get_gic_lpi_addr(struct gic_v3_its_priv *priv) |
| { |
| struct regmap *regmap; |
| struct udevice *dev; |
| int ret; |
| |
| ret = uclass_get_device_by_driver(UCLASS_SYSCON, |
| DM_DRIVER_GET(gic_lpi_syscon), &dev); |
| if (ret) { |
| pr_err("%s: failed to get %s syscon device\n", __func__, |
| DM_DRIVER_GET(gic_lpi_syscon)->name); |
| return ret; |
| } |
| |
| regmap = syscon_get_regmap(dev); |
| if (!regmap) { |
| pr_err("%s: failed to regmap for %s syscon device\n", __func__, |
| DM_DRIVER_GET(gic_lpi_syscon)->name); |
| return -ENODEV; |
| } |
| priv->lpi_base = regmap->ranges[0].start; |
| |
| priv->num_redist = dev_read_u32_default(dev, "max-gic-redistributors", |
| MAX_GIC_REDISTRIBUTORS); |
| |
| return 0; |
| } |
| |
| /* |
| * Program the GIC LPI configuration tables for all |
| * the re-distributors and enable the LPI table |
| */ |
| int gic_lpi_tables_init(void) |
| { |
| struct gic_v3_its_priv priv; |
| u32 gicd_typer; |
| u64 val; |
| u64 tmp; |
| int i; |
| u64 redist_lpi_base; |
| u64 pend_base; |
| |
| if (gic_v3_its_get_gic_addr(&priv)) |
| return -EINVAL; |
| |
| if (gic_v3_its_get_gic_lpi_addr(&priv)) |
| return -EINVAL; |
| |
| gicd_typer = readl((uintptr_t)(priv.gicd_base + GICD_TYPER)); |
| /* GIC support for Locality specific peripheral interrupts (LPI's) */ |
| if (!(gicd_typer & GICD_TYPER_LPIS)) { |
| pr_err("GIC implementation does not support LPI's\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Check for LPI is disabled for all the redistributors. |
| * Once the LPI table is enabled, can not program the |
| * LPI configuration tables again, unless the GIC is reset. |
| */ |
| for (i = 0; i < priv.num_redist; i++) { |
| u32 offset = i * GIC_REDISTRIBUTOR_OFFSET; |
| |
| if ((readl((uintptr_t)(priv.gicr_base + offset))) & |
| GICR_CTLR_ENABLE_LPIS) { |
| pr_err("Re-Distributor %d LPI is already enabled\n", |
| i); |
| return -EINVAL; |
| } |
| } |
| |
| /* lpi_id_bits to get LPI_PENDBASE_SZ and LPi_PROPBASE_SZ */ |
| lpi_id_bits = min_t(u32, GICD_TYPER_ID_BITS(gicd_typer), |
| ITS_MAX_LPI_NRBITS); |
| |
| /* Set PropBase */ |
| val = (priv.lpi_base | |
| GICR_PROPBASER_INNERSHAREABLE | |
| GICR_PROPBASER_RAWAWB | |
| ((LPI_NRBITS - 1) & GICR_PROPBASER_IDBITS_MASK)); |
| |
| writeq(val, (uintptr_t)(priv.gicr_base + GICR_PROPBASER)); |
| tmp = readl((uintptr_t)(priv.gicr_base + GICR_PROPBASER)); |
| if ((tmp ^ val) & GICR_PROPBASER_SHAREABILITY_MASK) { |
| if (!(tmp & GICR_PROPBASER_SHAREABILITY_MASK)) { |
| val &= ~(GICR_PROPBASER_SHAREABILITY_MASK | |
| GICR_PROPBASER_CACHEABILITY_MASK); |
| val |= GICR_PROPBASER_NC; |
| writeq(val, |
| (uintptr_t)(priv.gicr_base + GICR_PROPBASER)); |
| } |
| } |
| |
| redist_lpi_base = priv.lpi_base + LPI_PROPBASE_SZ; |
| |
| pend_base = priv.gicr_base + GICR_PENDBASER; |
| for (i = 0; i < priv.num_redist; i++) { |
| u32 offset = i * GIC_REDISTRIBUTOR_OFFSET; |
| |
| val = ((redist_lpi_base + (i * LPI_PENDBASE_SZ)) | |
| GICR_PENDBASER_INNERSHAREABLE | |
| GICR_PENDBASER_RAWAWB); |
| |
| writeq(val, (uintptr_t)(pend_base + offset)); |
| tmp = readq((uintptr_t)(pend_base + offset)); |
| if (!(tmp & GICR_PENDBASER_SHAREABILITY_MASK)) { |
| val &= ~(GICR_PENDBASER_SHAREABILITY_MASK | |
| GICR_PENDBASER_CACHEABILITY_MASK); |
| val |= GICR_PENDBASER_NC; |
| writeq(val, (uintptr_t)(pend_base + offset)); |
| } |
| |
| /* Enable LPI for the redistributor */ |
| writel(GICR_CTLR_ENABLE_LPIS, |
| (uintptr_t)(priv.gicr_base + offset)); |
| } |
| |
| return 0; |
| } |
| |
| static const struct udevice_id gic_v3_its_ids[] = { |
| { .compatible = "arm,gic-v3" }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(arm_gic_v3_its) = { |
| .name = "gic-v3", |
| .id = UCLASS_IRQ, |
| .of_match = gic_v3_its_ids, |
| }; |
| |
| static const struct udevice_id gic_lpi_syscon_ids[] = { |
| { .compatible = "gic-lpi-base" }, |
| {} |
| }; |
| |
| U_BOOT_DRIVER(gic_lpi_syscon) = { |
| .name = "gic-lpi-base", |
| .id = UCLASS_SYSCON, |
| .of_match = gic_lpi_syscon_ids, |
| }; |