| /* |
| * (C) Copyright 2006-2008 |
| * Texas Instruments, <www.ti.com> |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * Syed Mohammed Khasim <x0khasim@ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef _OMAP3_H_ |
| #define _OMAP3_H_ |
| |
| /* Stuff on L3 Interconnect */ |
| #define SMX_APE_BASE 0x68000000 |
| |
| /* GPMC */ |
| #define OMAP34XX_GPMC_BASE 0x6E000000 |
| |
| /* SMS */ |
| #define OMAP34XX_SMS_BASE 0x6C000000 |
| |
| /* SDRC */ |
| #define OMAP34XX_SDRC_BASE 0x6D000000 |
| |
| /* |
| * L4 Peripherals - L4 Wakeup and L4 Core now |
| */ |
| #define OMAP34XX_CORE_L4_IO_BASE 0x48000000 |
| #define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000 |
| #define OMAP34XX_ID_L4_IO_BASE 0x4830A200 |
| #define OMAP34XX_L4_PER 0x49000000 |
| #define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE |
| |
| /* DMA4/SDMA */ |
| #define OMAP34XX_DMA4_BASE 0x48056000 |
| |
| /* CONTROL */ |
| #define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE + 0x2000) |
| |
| #ifndef __ASSEMBLY__ |
| /* Signal Integrity Parameter Control Registers */ |
| struct control_prog_io { |
| unsigned char res[0x408]; |
| unsigned int io2; /* 0x408 */ |
| unsigned char res2[0x38]; |
| unsigned int io0; /* 0x444 */ |
| unsigned int io1; /* 0x448 */ |
| }; |
| #endif /* __ASSEMBLY__ */ |
| |
| /* Bit definition for CONTROL_PROG_IO1 */ |
| #define PRG_I2C2_PULLUPRESX 0x00000001 |
| |
| /* Scratchpad memory */ |
| #define OMAP34XX_SCRATCHPAD (OMAP34XX_CTRL_BASE + 0x910) |
| |
| /* UART */ |
| #define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE + 0x6a000) |
| #define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE + 0x6c000) |
| #define OMAP34XX_UART3 (OMAP34XX_L4_PER + 0x20000) |
| #define OMAP34XX_UART4 (OMAP34XX_L4_PER + 0x42000) |
| |
| /* General Purpose Timers */ |
| #define OMAP34XX_GPT1 0x48318000 |
| #define OMAP34XX_GPT2 0x49032000 |
| #define OMAP34XX_GPT3 0x49034000 |
| #define OMAP34XX_GPT4 0x49036000 |
| #define OMAP34XX_GPT5 0x49038000 |
| #define OMAP34XX_GPT6 0x4903A000 |
| #define OMAP34XX_GPT7 0x4903C000 |
| #define OMAP34XX_GPT8 0x4903E000 |
| #define OMAP34XX_GPT9 0x49040000 |
| #define OMAP34XX_GPT10 0x48086000 |
| #define OMAP34XX_GPT11 0x48088000 |
| #define OMAP34XX_GPT12 0x48304000 |
| |
| /* WatchDog Timers (1 secure, 3 GP) */ |
| #define WD1_BASE 0x4830C000 |
| #define WD2_BASE 0x48314000 |
| #define WD3_BASE 0x49030000 |
| |
| /* 32KTIMER */ |
| #define SYNC_32KTIMER_BASE 0x48320000 |
| |
| #ifndef __ASSEMBLY__ |
| |
| struct s32ktimer { |
| unsigned char res[0x10]; |
| unsigned int s32k_cr; /* 0x10 */ |
| }; |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #ifndef __ASSEMBLY__ |
| struct gpio { |
| unsigned char res1[0x34]; |
| unsigned int oe; /* 0x34 */ |
| unsigned int datain; /* 0x38 */ |
| unsigned char res2[0x54]; |
| unsigned int cleardataout; /* 0x90 */ |
| unsigned int setdataout; /* 0x94 */ |
| }; |
| #endif /* __ASSEMBLY__ */ |
| |
| #define GPIO0 (0x1 << 0) |
| #define GPIO1 (0x1 << 1) |
| #define GPIO2 (0x1 << 2) |
| #define GPIO3 (0x1 << 3) |
| #define GPIO4 (0x1 << 4) |
| #define GPIO5 (0x1 << 5) |
| #define GPIO6 (0x1 << 6) |
| #define GPIO7 (0x1 << 7) |
| #define GPIO8 (0x1 << 8) |
| #define GPIO9 (0x1 << 9) |
| #define GPIO10 (0x1 << 10) |
| #define GPIO11 (0x1 << 11) |
| #define GPIO12 (0x1 << 12) |
| #define GPIO13 (0x1 << 13) |
| #define GPIO14 (0x1 << 14) |
| #define GPIO15 (0x1 << 15) |
| #define GPIO16 (0x1 << 16) |
| #define GPIO17 (0x1 << 17) |
| #define GPIO18 (0x1 << 18) |
| #define GPIO19 (0x1 << 19) |
| #define GPIO20 (0x1 << 20) |
| #define GPIO21 (0x1 << 21) |
| #define GPIO22 (0x1 << 22) |
| #define GPIO23 (0x1 << 23) |
| #define GPIO24 (0x1 << 24) |
| #define GPIO25 (0x1 << 25) |
| #define GPIO26 (0x1 << 26) |
| #define GPIO27 (0x1 << 27) |
| #define GPIO28 (0x1 << 28) |
| #define GPIO29 (0x1 << 29) |
| #define GPIO30 (0x1 << 30) |
| #define GPIO31 (0x1 << 31) |
| |
| /* base address for indirect vectors (internal boot mode) */ |
| #define SRAM_OFFSET0 0x40000000 |
| #define SRAM_OFFSET1 0x00200000 |
| #define SRAM_OFFSET2 0x0000F800 |
| #define SRAM_VECT_CODE (SRAM_OFFSET0 | SRAM_OFFSET1 | \ |
| SRAM_OFFSET2) |
| #define SRAM_CLK_CODE (SRAM_VECT_CODE + 64) |
| |
| #define NON_SECURE_SRAM_START 0x40208000 /* Works for GP & EMU */ |
| #define NON_SECURE_SRAM_END 0x40210000 |
| #define SRAM_SCRATCH_SPACE_ADDR 0x4020E000 |
| |
| #define LOW_LEVEL_SRAM_STACK 0x4020FFFC |
| |
| /* scratch area - accessible on both EMU and GP */ |
| #define OMAP3_PUBLIC_SRAM_SCRATCH_AREA NON_SECURE_SRAM_START |
| |
| #define DEBUG_LED1 149 /* gpio */ |
| #define DEBUG_LED2 150 /* gpio */ |
| |
| #define XDR_POP 5 /* package on package part */ |
| #define SDR_DISCRETE 4 /* 128M memory SDR module */ |
| #define DDR_STACKED 3 /* stacked part on 2422 */ |
| #define DDR_COMBO 2 /* combo part on cpu daughter card */ |
| #define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ |
| |
| #define DDR_100 100 /* type found on most mem d-boards */ |
| #define DDR_111 111 /* some combo parts */ |
| #define DDR_133 133 /* most combo, some mem d-boards */ |
| #define DDR_165 165 /* future parts */ |
| |
| #define CPU_3430 0x3430 |
| |
| /* |
| * 343x real hardware: |
| * ES1 = rev 0 |
| * |
| * ES2 onwards, the value maps to contents of IDCODE register [31:28]. |
| * |
| * Note : CPU_3XX_ES20 is used in cache.S. Please review before changing. |
| */ |
| #define CPU_3XX_ES10 0 |
| #define CPU_3XX_ES20 1 |
| #define CPU_3XX_ES21 2 |
| #define CPU_3XX_ES30 3 |
| #define CPU_3XX_ES31 4 |
| #define CPU_3XX_ES312 7 |
| #define CPU_3XX_MAX_REV 8 |
| |
| /* |
| * 37xx real hardware: |
| * ES1.0 onwards, the value maps to contents of IDCODE register [31:28]. |
| */ |
| |
| #define CPU_37XX_ES10 0 |
| #define CPU_37XX_ES11 1 |
| #define CPU_37XX_ES12 2 |
| #define CPU_37XX_MAX_REV 3 |
| |
| #define CPU_3XX_ID_SHIFT 28 |
| |
| #define WIDTH_8BIT 0x0000 |
| #define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ |
| |
| /* |
| * Hawkeye values |
| */ |
| #define HAWKEYE_OMAP34XX 0xb7ae |
| #define HAWKEYE_AM35XX 0xb868 |
| #define HAWKEYE_OMAP36XX 0xb891 |
| |
| #define HAWKEYE_SHIFT 12 |
| |
| /* |
| * Define CPU families |
| */ |
| #define CPU_OMAP34XX 0x3400 /* OMAP34xx/OMAP35 devices */ |
| #define CPU_AM35XX 0x3500 /* AM35xx devices */ |
| #define CPU_OMAP36XX 0x3600 /* OMAP36xx devices */ |
| |
| /* |
| * Control status register values corresponding to cpu variants |
| */ |
| #define OMAP3503 0x5c00 |
| #define OMAP3515 0x1c00 |
| #define OMAP3525 0x4c00 |
| #define OMAP3530 0x0c00 |
| |
| #define AM3505 0x5c00 |
| #define AM3517 0x1c00 |
| |
| #define OMAP3730 0x0c00 |
| |
| /* |
| * ROM code API related flags |
| */ |
| #define OMAP3_GP_ROMCODE_API_L2_INVAL 1 |
| #define OMAP3_GP_ROMCODE_API_WRITE_ACR 3 |
| |
| /* |
| * EMU device PPA HAL related flags |
| */ |
| #define OMAP3_EMU_HAL_API_L2_INVAL 40 |
| #define OMAP3_EMU_HAL_API_WRITE_ACR 42 |
| |
| #define OMAP3_EMU_HAL_START_HAL_CRITICAL 4 |
| |
| /* ABB settings */ |
| #define OMAP_ABB_SETTLING_TIME 30 |
| #define OMAP_ABB_CLOCK_CYCLES 8 |
| |
| /* ABB tranxdone mask */ |
| #define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26) |
| |
| #define OMAP_REBOOT_REASON_OFFSET 0x04 |
| |
| /* Boot parameters */ |
| #ifndef __ASSEMBLY__ |
| struct omap_boot_parameters { |
| unsigned int boot_message; |
| unsigned char boot_device; |
| unsigned char reserved; |
| unsigned char reset_reason; |
| unsigned char ch_flags; |
| unsigned int boot_device_descriptor; |
| }; |
| |
| int omap_reboot_mode(char *mode, unsigned int length); |
| int omap_reboot_mode_clear(void); |
| int omap_reboot_mode_store(char *mode); |
| #endif |
| |
| #endif |