| /* |
| * K2G EVM : Board initialization |
| * |
| * (C) Copyright 2015 |
| * Texas Instruments Incorporated, <www.ti.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <common.h> |
| #include <asm/arch/clock.h> |
| #include <asm/ti-common/keystone_net.h> |
| #include <asm/arch/psc_defs.h> |
| #include <asm/arch/mmc_host_def.h> |
| #include "mux-k2g.h" |
| |
| #define SYS_CLK 24000000 |
| |
| unsigned int external_clk[ext_clk_count] = { |
| [sys_clk] = SYS_CLK, |
| [pa_clk] = SYS_CLK, |
| [tetris_clk] = SYS_CLK, |
| [ddr3a_clk] = SYS_CLK, |
| [uart_clk] = SYS_CLK, |
| }; |
| |
| static struct pll_init_data main_pll_config = {MAIN_PLL, 100, 1, 4}; |
| static struct pll_init_data tetris_pll_config = {TETRIS_PLL, 100, 1, 4}; |
| static struct pll_init_data uart_pll_config = {UART_PLL, 64, 1, 4}; |
| static struct pll_init_data nss_pll_config = {NSS_PLL, 250, 3, 2}; |
| static struct pll_init_data ddr3_pll_config = {DDR3A_PLL, 250, 3, 10}; |
| |
| struct pll_init_data *get_pll_init_data(int pll) |
| { |
| struct pll_init_data *data = NULL; |
| |
| switch (pll) { |
| case MAIN_PLL: |
| data = &main_pll_config; |
| break; |
| case TETRIS_PLL: |
| data = &tetris_pll_config; |
| break; |
| case NSS_PLL: |
| data = &nss_pll_config; |
| break; |
| case UART_PLL: |
| data = &uart_pll_config; |
| break; |
| case DDR3_PLL: |
| data = &ddr3_pll_config; |
| break; |
| default: |
| data = NULL; |
| } |
| |
| return data; |
| } |
| |
| s16 divn_val[16] = { |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 |
| }; |
| |
| #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) |
| int board_mmc_init(bd_t *bis) |
| { |
| if (psc_enable_module(KS2_LPSC_MMC)) { |
| printf("%s module enabled failed\n", __func__); |
| return -1; |
| } |
| |
| omap_mmc_init(0, 0, 0, -1, -1); |
| omap_mmc_init(1, 0, 0, -1, -1); |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_BOARD_EARLY_INIT_F |
| int board_early_init_f(void) |
| { |
| init_plls(); |
| |
| k2g_mux_config(); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_SPL_BUILD |
| void spl_init_keystone_plls(void) |
| { |
| init_plls(); |
| } |
| #endif |
| |
| #ifdef CONFIG_DRIVER_TI_KEYSTONE_NET |
| struct eth_priv_t eth_priv_cfg[] = { |
| { |
| .int_name = "K2G_EMAC", |
| .rx_flow = 0, |
| .phy_addr = 0, |
| .slave_port = 1, |
| .sgmii_link_type = SGMII_LINK_MAC_PHY, |
| .phy_if = PHY_INTERFACE_MODE_RGMII, |
| }, |
| }; |
| |
| int get_num_eth_ports(void) |
| { |
| return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t); |
| } |
| #endif |