| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2019 Microchip Technology Inc. |
| * Padmarao Begari <padmarao.begari@microchip.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <env.h> |
| #include <init.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define MPFS_SYSREG_SOFT_RESET ((unsigned int *)0x20002088) |
| #define MPFS_SYS_SERVICE_CR ((unsigned int *)0x37020050) |
| #define MPFS_SYS_SERVICE_SR ((unsigned int *)0x37020054) |
| #define MPFS_SYS_SERVICE_MAILBOX ((unsigned char *)0x37020800) |
| |
| #define PERIPH_RESET_VALUE 0x1e8u |
| #define SERVICE_CR_REQ 0x1u |
| #define SERVICE_SR_BUSY 0x2u |
| |
| static void read_device_serial_number(u8 *response, u8 response_size) |
| { |
| u8 idx; |
| u8 *response_buf; |
| unsigned int val; |
| |
| response_buf = (u8 *)response; |
| |
| writel(SERVICE_CR_REQ, MPFS_SYS_SERVICE_CR); |
| /* |
| * REQ bit will remain set till the system controller starts |
| * processing. |
| */ |
| do { |
| val = readl(MPFS_SYS_SERVICE_CR); |
| } while (SERVICE_CR_REQ == (val & SERVICE_CR_REQ)); |
| |
| /* |
| * Once system controller starts processing the busy bit will |
| * go high and service is completed when busy bit is gone low |
| */ |
| do { |
| val = readl(MPFS_SYS_SERVICE_SR); |
| } while (SERVICE_SR_BUSY == (val & SERVICE_SR_BUSY)); |
| |
| for (idx = 0; idx < response_size; idx++) |
| response_buf[idx] = readb(MPFS_SYS_SERVICE_MAILBOX + idx); |
| } |
| |
| int board_init(void) |
| { |
| /* For now nothing to do here. */ |
| |
| return 0; |
| } |
| |
| int board_early_init_f(void) |
| { |
| unsigned int val; |
| |
| /* Reset uart, mmc peripheral */ |
| val = readl(MPFS_SYSREG_SOFT_RESET); |
| val = (val & ~(PERIPH_RESET_VALUE)); |
| writel(val, MPFS_SYSREG_SOFT_RESET); |
| |
| return 0; |
| } |
| |
| int board_late_init(void) |
| { |
| u32 ret; |
| u32 node; |
| u8 idx; |
| u8 device_serial_number[16] = { 0 }; |
| unsigned char mac_addr[6]; |
| char icicle_mac_addr[20]; |
| void *blob = (void *)gd->fdt_blob; |
| |
| node = fdt_path_offset(blob, "ethernet0"); |
| if (node < 0) { |
| printf("No ethernet0 path offset\n"); |
| return -ENODEV; |
| } |
| |
| ret = fdtdec_get_byte_array(blob, node, "local-mac-address", mac_addr, 6); |
| if (ret) { |
| printf("No local-mac-address property\n"); |
| return -EINVAL; |
| } |
| |
| read_device_serial_number(device_serial_number, 16); |
| |
| /* Update MAC address with device serial number */ |
| mac_addr[0] = 0x00; |
| mac_addr[1] = 0x04; |
| mac_addr[2] = 0xA3; |
| mac_addr[3] = device_serial_number[2]; |
| mac_addr[4] = device_serial_number[1]; |
| mac_addr[5] = device_serial_number[0]; |
| |
| ret = fdt_setprop(blob, node, "local-mac-address", mac_addr, 6); |
| if (ret) { |
| printf("Error setting local-mac-address property\n"); |
| return -ENODEV; |
| } |
| |
| icicle_mac_addr[0] = '['; |
| |
| sprintf(&icicle_mac_addr[1], "%pM", mac_addr); |
| |
| icicle_mac_addr[18] = ']'; |
| icicle_mac_addr[19] = '\0'; |
| |
| for (idx = 0; idx < 20; idx++) { |
| if (icicle_mac_addr[idx] == ':') |
| icicle_mac_addr[idx] = ' '; |
| } |
| env_set("icicle_mac_addr", icicle_mac_addr); |
| |
| return 0; |
| } |