| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries |
| * |
| * Author: Claudiu Beznea <claudiu.beznea@microchip.com> |
| * |
| * Based on sam9x60.c on Linux. |
| */ |
| |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <dt-bindings/clk/at91.h> |
| #include <linux/clk-provider.h> |
| |
| #include "pmc.h" |
| |
| /** |
| * Clock identifiers to be used in conjunction with macros like |
| * AT91_TO_CLK_ID() |
| * |
| * @ID_MD_SLCK: TD slow clock identifier |
| * @ID_TD_SLCK: MD slow clock identifier |
| * @ID_MAIN_XTAL: Main Xtal clock identifier |
| * @ID_MAIN_RC: Main RC clock identifier |
| * @ID_MAIN_RC_OSC: Main RC Oscillator clock identifier |
| * @ID_MAIN_OSC: Main Oscillator clock identifier |
| * @ID_MAINCK: MAINCK clock identifier |
| * @ID_PLL_U_FRAC: UPLL fractional clock identifier |
| * @ID_PLL_U_DIV: UPLL divider clock identifier |
| * @ID_PLL_A_FRAC: APLL fractional clock identifier |
| * @ID_PLL_A_DIV: APLL divider clock identifier |
| |
| * @ID_MCK_DIV: MCK DIV clock identifier |
| |
| * @ID_UTMI: UTMI clock identifier |
| |
| * @ID_PROG0: Programmable 0 clock identifier |
| * @ID_PROG1: Programmable 1 clock identifier |
| |
| * @ID_PCK0: PCK0 system clock identifier |
| * @ID_PCK1: PCK1 system clock identifier |
| * @ID_DDR: DDR system clock identifier |
| * @ID_QSPI: QSPI system clock identifier |
| * |
| * @ID_MCK_PRES: MCK PRES clock identifier |
| * |
| * Note: if changing the values of this enums please sync them with |
| * device tree |
| */ |
| enum pmc_clk_ids { |
| ID_MD_SLCK = 0, |
| ID_TD_SLCK = 1, |
| ID_MAIN_XTAL = 2, |
| ID_MAIN_RC = 3, |
| ID_MAIN_RC_OSC = 4, |
| ID_MAIN_OSC = 5, |
| ID_MAINCK = 6, |
| |
| ID_PLL_U_FRAC = 7, |
| ID_PLL_U_DIV = 8, |
| ID_PLL_A_FRAC = 9, |
| ID_PLL_A_DIV = 10, |
| |
| ID_MCK_DIV = 11, |
| |
| ID_UTMI = 12, |
| |
| ID_PROG0 = 13, |
| ID_PROG1 = 14, |
| |
| ID_PCK0 = 15, |
| ID_PCK1 = 16, |
| |
| ID_DDR = 17, |
| ID_QSPI = 18, |
| |
| ID_MCK_PRES = 19, |
| ID_USBCK = 20, |
| ID_UHPCK = 21, |
| |
| ID_MAX, |
| }; |
| |
| /** |
| * PLL type identifiers |
| * @PLL_TYPE_FRAC: fractional PLL identifier |
| * @PLL_TYPE_DIV: divider PLL identifier |
| */ |
| enum pll_type { |
| PLL_TYPE_FRAC, |
| PLL_TYPE_DIV, |
| }; |
| |
| /* Clock names used as parents for multiple clocks. */ |
| static const char *clk_names[] = { |
| [ID_MAIN_RC_OSC] = "main_rc_osc", |
| [ID_MAIN_OSC] = "main_osc", |
| [ID_MAINCK] = "mainck", |
| [ID_PLL_U_DIV] = "upll_divpmcck", |
| [ID_PLL_A_DIV] = "plla_divpmcck", |
| [ID_MCK_PRES] = "mck_pres", |
| [ID_MCK_DIV] = "mck_div", |
| [ID_USBCK] = "usbck", |
| }; |
| |
| /* Fractional PLL output range. */ |
| static const struct clk_range plla_outputs[] = { |
| { .min = 2343750, .max = 1200000000 }, |
| }; |
| |
| static const struct clk_range upll_outputs[] = { |
| { .min = 300000000, .max = 500000000 }, |
| }; |
| |
| /* PLL characteristics. */ |
| static const struct clk_pll_characteristics apll_characteristics = { |
| .input = { .min = 12000000, .max = 48000000 }, |
| .num_output = ARRAY_SIZE(plla_outputs), |
| .output = plla_outputs, |
| }; |
| |
| static const struct clk_pll_characteristics upll_characteristics = { |
| .input = { .min = 12000000, .max = 48000000 }, |
| .num_output = ARRAY_SIZE(upll_outputs), |
| .output = upll_outputs, |
| .upll = true, |
| }; |
| |
| /* Layout for fractional PLLs. */ |
| static const struct clk_pll_layout pll_layout_frac = { |
| .mul_mask = GENMASK(31, 24), |
| .frac_mask = GENMASK(21, 0), |
| .mul_shift = 24, |
| .frac_shift = 0, |
| }; |
| |
| /* Layout for DIV PLLs. */ |
| static const struct clk_pll_layout pll_layout_div = { |
| .div_mask = GENMASK(7, 0), |
| .endiv_mask = BIT(29), |
| .div_shift = 0, |
| .endiv_shift = 29, |
| }; |
| |
| /* MCK characteristics. */ |
| static const struct clk_master_characteristics mck_characteristics = { |
| .output = { .min = 140000000, .max = 200000000 }, |
| .divisors = { 1, 2, 4, 3 }, |
| .have_div3_pres = 1, |
| }; |
| |
| /* MCK layout. */ |
| static const struct clk_master_layout mck_layout = { |
| .mask = 0x373, |
| .pres_shift = 4, |
| .offset = 0x28, |
| }; |
| |
| /* Programmable clock layout. */ |
| static const struct clk_programmable_layout programmable_layout = { |
| .pres_mask = 0xff, |
| .pres_shift = 8, |
| .css_mask = 0x1f, |
| .have_slck_mck = 0, |
| .is_pres_direct = 1, |
| }; |
| |
| /* Peripheral clock layout. */ |
| static const struct clk_pcr_layout pcr_layout = { |
| .offset = 0x88, |
| .cmd = BIT(31), |
| .gckcss_mask = GENMASK(12, 8), |
| .pid_mask = GENMASK(6, 0), |
| }; |
| |
| /* USB clock layout */ |
| static const struct clk_usbck_layout usbck_layout = { |
| .offset = 0x38, |
| .usbs_mask = GENMASK(1, 0), |
| .usbdiv_mask = GENMASK(11, 8), |
| }; |
| |
| /** |
| * PLL clocks description |
| * @n: clock name |
| * @p: clock parent |
| * @l: clock layout |
| * @t: clock type |
| * @f: true if clock is fixed and not changeable by driver |
| * @id: clock id corresponding to PLL driver |
| * @cid: clock id corresponding to clock subsystem |
| */ |
| static const struct { |
| const char *n; |
| const char *p; |
| const struct clk_pll_layout *l; |
| const struct clk_pll_characteristics *c; |
| u8 t; |
| u8 f; |
| u8 id; |
| u8 cid; |
| } sam9x60_plls[] = { |
| { |
| .n = "plla_fracck", |
| .p = "mainck", |
| .l = &pll_layout_frac, |
| .c = &apll_characteristics, |
| .t = PLL_TYPE_FRAC, |
| .f = 1, |
| .id = 0, |
| .cid = ID_PLL_A_FRAC, |
| }, |
| |
| { |
| .n = "plla_divpmcck", |
| .p = "plla_fracck", |
| .l = &pll_layout_div, |
| .c = &apll_characteristics, |
| .t = PLL_TYPE_DIV, |
| .f = 1, |
| .id = 0, |
| .cid = ID_PLL_A_DIV, |
| }, |
| |
| { |
| .n = "upll_fracck", |
| .p = "main_osc", |
| .l = &pll_layout_frac, |
| .c = &upll_characteristics, |
| .t = PLL_TYPE_FRAC, |
| .f = 1, |
| .id = 1, |
| .cid = ID_PLL_U_FRAC, |
| }, |
| |
| { |
| .n = "upll_divpmcck", |
| .p = "upll_fracck", |
| .l = &pll_layout_div, |
| .c = &upll_characteristics, |
| .t = PLL_TYPE_DIV, |
| .f = 1, |
| .id = 1, |
| .cid = ID_PLL_U_DIV, |
| }, |
| }; |
| |
| /** |
| * Programmable clock description |
| * @n: clock name |
| * @cid: clock id corresponding to clock subsystem |
| */ |
| static const struct { |
| const char *n; |
| u8 cid; |
| } sam9x60_prog[] = { |
| { .n = "prog0", .cid = ID_PROG0, }, |
| { .n = "prog1", .cid = ID_PROG1, }, |
| }; |
| |
| /* Mux table for programmable clocks. */ |
| static u32 sam9x60_prog_mux_table[] = { 0, 1, 2, 3, 4, 5, }; |
| |
| /** |
| * System clock description |
| * @n: clock name |
| * @p: parent clock name |
| * @id: clock id corresponding to system clock driver |
| * @cid: clock id corresponding to clock subsystem |
| */ |
| static const struct { |
| const char *n; |
| const char *p; |
| u8 id; |
| u8 cid; |
| } sam9x60_systemck[] = { |
| { .n = "ddrck", .p = "mck_div", .id = 2, .cid = ID_DDR, }, |
| { .n = "uhpck", .p = "usbck", .id = 6, .cid = ID_UHPCK }, |
| { .n = "pck0", .p = "prog0", .id = 8, .cid = ID_PCK0, }, |
| { .n = "pck1", .p = "prog1", .id = 9, .cid = ID_PCK1, }, |
| { .n = "qspick", .p = "mck_div", .id = 19, .cid = ID_QSPI, }, |
| }; |
| |
| /** |
| * Peripheral clock description |
| * @n: clock name |
| * @id: clock id |
| */ |
| static const struct { |
| const char *n; |
| u8 id; |
| } sam9x60_periphck[] = { |
| { .n = "pioA_clk", .id = 2, }, |
| { .n = "pioB_clk", .id = 3, }, |
| { .n = "pioC_clk", .id = 4, }, |
| { .n = "flex0_clk", .id = 5, }, |
| { .n = "flex1_clk", .id = 6, }, |
| { .n = "flex2_clk", .id = 7, }, |
| { .n = "flex3_clk", .id = 8, }, |
| { .n = "flex6_clk", .id = 9, }, |
| { .n = "flex7_clk", .id = 10, }, |
| { .n = "flex8_clk", .id = 11, }, |
| { .n = "sdmmc0_clk", .id = 12, }, |
| { .n = "flex4_clk", .id = 13, }, |
| { .n = "flex5_clk", .id = 14, }, |
| { .n = "flex9_clk", .id = 15, }, |
| { .n = "flex10_clk", .id = 16, }, |
| { .n = "tcb0_clk", .id = 17, }, |
| { .n = "pwm_clk", .id = 18, }, |
| { .n = "adc_clk", .id = 19, }, |
| { .n = "dma0_clk", .id = 20, }, |
| { .n = "matrix_clk", .id = 21, }, |
| { .n = "uhphs_clk", .id = 22, }, |
| { .n = "udphs_clk", .id = 23, }, |
| { .n = "macb0_clk", .id = 24, }, |
| { .n = "lcd_clk", .id = 25, }, |
| { .n = "sdmmc1_clk", .id = 26, }, |
| { .n = "macb1_clk", .id = 27, }, |
| { .n = "ssc_clk", .id = 28, }, |
| { .n = "can0_clk", .id = 29, }, |
| { .n = "can1_clk", .id = 30, }, |
| { .n = "flex11_clk", .id = 32, }, |
| { .n = "flex12_clk", .id = 33, }, |
| { .n = "i2s_clk", .id = 34, }, |
| { .n = "qspi_clk", .id = 35, }, |
| { .n = "gfx2d_clk", .id = 36, }, |
| { .n = "pit64b_clk", .id = 37, }, |
| { .n = "trng_clk", .id = 38, }, |
| { .n = "aes_clk", .id = 39, }, |
| { .n = "tdes_clk", .id = 40, }, |
| { .n = "sha_clk", .id = 41, }, |
| { .n = "classd_clk", .id = 42, }, |
| { .n = "isi_clk", .id = 43, }, |
| { .n = "pioD_clk", .id = 44, }, |
| { .n = "tcb1_clk", .id = 45, }, |
| { .n = "dbgu_clk", .id = 47, }, |
| { .n = "mpddr_clk", .id = 49, }, |
| }; |
| |
| /** |
| * Generic clock description |
| * @n: clock name |
| * @ep: extra parents parents names |
| * @ep_mux_table: extra parents mux table |
| * @ep_clk_mux_table: extra parents clock mux table (for CCF) |
| * @r: clock output range |
| * @ep_count: extra parents count |
| * @id: clock id |
| */ |
| static const struct { |
| const char *n; |
| struct clk_range r; |
| u8 id; |
| } sam9x60_gck[] = { |
| { .n = "flex0_gclk", .id = 5, }, |
| { .n = "flex1_gclk", .id = 6, }, |
| { .n = "flex2_gclk", .id = 7, }, |
| { .n = "flex3_gclk", .id = 8, }, |
| { .n = "flex6_gclk", .id = 9, }, |
| { .n = "flex7_gclk", .id = 10, }, |
| { .n = "flex8_gclk", .id = 11, }, |
| { .n = "sdmmc0_gclk", .id = 12, .r = { .min = 0, .max = 105000000 }, }, |
| { .n = "flex4_gclk", .id = 13, }, |
| { .n = "flex5_gclk", .id = 14, }, |
| { .n = "flex9_gclk", .id = 15, }, |
| { .n = "flex10_gclk", .id = 16, }, |
| { .n = "tcb0_gclk", .id = 17, }, |
| { .n = "adc_gclk", .id = 19, }, |
| { .n = "lcd_gclk", .id = 25, .r = { .min = 0, .max = 140000000 }, }, |
| { .n = "sdmmc1_gclk", .id = 26, .r = { .min = 0, .max = 105000000 }, }, |
| { .n = "flex11_gclk", .id = 32, }, |
| { .n = "flex12_gclk", .id = 33, }, |
| { .n = "i2s_gclk", .id = 34, .r = { .min = 0, .max = 105000000 }, }, |
| { .n = "pit64b_gclk", .id = 37, }, |
| { .n = "classd_gclk", .id = 42, .r = { .min = 0, .max = 100000000 }, }, |
| { .n = "tcb1_gclk", .id = 45, }, |
| { .n = "dbgu_gclk", .id = 47, }, |
| }; |
| |
| /** |
| * Clock setup description |
| * @cid: clock id corresponding to clock subsystem |
| * @pid: parent clock id corresponding to clock subsystem |
| * @rate: clock rate |
| * @prate: parent rate |
| */ |
| static const struct pmc_clk_setup sam9x60_clk_setup[] = { |
| { |
| .cid = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_U_FRAC), |
| .rate = 960000000, |
| }, |
| |
| { |
| .cid = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_U_DIV), |
| .rate = 480000000, |
| }, |
| |
| { |
| .cid = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_USBCK), |
| .pid = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_U_DIV), |
| .rate = 48000000, |
| }, |
| }; |
| |
| #define prepare_mux_table(_allocs, _index, _dst, _src, _num, _label) \ |
| do { \ |
| int _i; \ |
| (_dst) = kzalloc(sizeof(*(_dst)) * (_num), GFP_KERNEL); \ |
| if (!(_dst)) { \ |
| ret = -ENOMEM; \ |
| goto _label; \ |
| } \ |
| (_allocs)[(_index)++] = (_dst); \ |
| for (_i = 0; _i < (_num); _i++) \ |
| (_dst)[_i] = (_src)[_i]; \ |
| } while (0) |
| |
| static int sam9x60_clk_probe(struct udevice *dev) |
| { |
| void __iomem *base = (void *)devfdt_get_addr_ptr(dev); |
| unsigned int *clkmuxallocs[64], *muxallocs[64]; |
| const char *p[10]; |
| unsigned int cm[10], m[10], *tmpclkmux, *tmpmux; |
| struct clk clk, *c; |
| int ret, muxallocindex = 0, clkmuxallocindex = 0, i; |
| static const struct clk_range r = { 0, 0 }; |
| |
| if (!base) |
| return -EINVAL; |
| |
| memset(muxallocs, 0, sizeof(muxallocs)); |
| memset(clkmuxallocs, 0, sizeof(clkmuxallocs)); |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret) |
| return ret; |
| |
| ret = clk_get_by_id(clk.id, &c); |
| if (ret) |
| return ret; |
| |
| clk_names[ID_TD_SLCK] = kmemdup(clk_hw_get_name(c), |
| strlen(clk_hw_get_name(c)) + 1, |
| GFP_KERNEL); |
| if (!clk_names[ID_TD_SLCK]) |
| return -ENOMEM; |
| |
| ret = clk_get_by_index(dev, 1, &clk); |
| if (ret) |
| return ret; |
| |
| ret = clk_get_by_id(clk.id, &c); |
| if (ret) |
| return ret; |
| |
| clk_names[ID_MD_SLCK] = kmemdup(clk_hw_get_name(c), |
| strlen(clk_hw_get_name(c)) + 1, |
| GFP_KERNEL); |
| if (!clk_names[ID_MD_SLCK]) |
| return -ENOMEM; |
| |
| ret = clk_get_by_index(dev, 2, &clk); |
| if (ret) |
| return ret; |
| |
| clk_names[ID_MAIN_XTAL] = kmemdup(clk_hw_get_name(&clk), |
| strlen(clk_hw_get_name(&clk)) + 1, |
| GFP_KERNEL); |
| if (!clk_names[ID_MAIN_XTAL]) |
| return -ENOMEM; |
| |
| ret = clk_get_by_index(dev, 3, &clk); |
| if (ret) |
| goto fail; |
| |
| clk_names[ID_MAIN_RC] = kmemdup(clk_hw_get_name(&clk), |
| strlen(clk_hw_get_name(&clk)) + 1, |
| GFP_KERNEL); |
| if (ret) |
| goto fail; |
| |
| /* Register main rc oscillator. */ |
| c = at91_clk_main_rc(base, clk_names[ID_MAIN_RC_OSC], |
| clk_names[ID_MAIN_RC]); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAIN_RC_OSC), c); |
| |
| /* Register main oscillator. */ |
| c = at91_clk_main_osc(base, clk_names[ID_MAIN_OSC], |
| clk_names[ID_MAIN_XTAL], false); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAIN_OSC), c); |
| |
| /* Register mainck. */ |
| p[0] = clk_names[ID_MAIN_RC_OSC]; |
| p[1] = clk_names[ID_MAIN_OSC]; |
| cm[0] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAIN_RC_OSC); |
| cm[1] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAIN_OSC); |
| prepare_mux_table(clkmuxallocs, clkmuxallocindex, tmpclkmux, cm, 2, |
| fail); |
| c = at91_clk_sam9x5_main(base, clk_names[ID_MAINCK], p, |
| 2, tmpclkmux, PMC_TYPE_CORE); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAINCK), c); |
| |
| /* Register PLL fracs clocks. */ |
| for (i = 0; i < ARRAY_SIZE(sam9x60_plls); i++) { |
| if (sam9x60_plls[i].t != PLL_TYPE_FRAC) |
| continue; |
| |
| c = sam9x60_clk_register_frac_pll(base, sam9x60_plls[i].n, |
| sam9x60_plls[i].p, |
| sam9x60_plls[i].id, |
| sam9x60_plls[i].c, |
| sam9x60_plls[i].l, |
| sam9x60_plls[i].f); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, sam9x60_plls[i].cid), c); |
| } |
| |
| /* Register PLL div clocks. */ |
| for (i = 0; i < ARRAY_SIZE(sam9x60_plls); i++) { |
| if (sam9x60_plls[i].t != PLL_TYPE_DIV) |
| continue; |
| |
| c = sam9x60_clk_register_div_pll(base, sam9x60_plls[i].n, |
| sam9x60_plls[i].p, |
| sam9x60_plls[i].id, |
| sam9x60_plls[i].c, |
| sam9x60_plls[i].l, |
| sam9x60_plls[i].f); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, sam9x60_plls[i].cid), c); |
| } |
| |
| /* Register MCK pres clock. */ |
| p[0] = clk_names[ID_MD_SLCK]; |
| p[1] = clk_names[ID_MAINCK]; |
| p[2] = clk_names[ID_PLL_A_DIV]; |
| p[3] = clk_names[ID_PLL_U_DIV]; |
| cm[0] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MD_SLCK); |
| cm[1] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAINCK); |
| cm[2] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_A_DIV); |
| cm[3] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_U_DIV); |
| prepare_mux_table(clkmuxallocs, clkmuxallocindex, tmpclkmux, cm, 4, |
| fail); |
| c = at91_clk_register_master_pres(base, clk_names[ID_MCK_PRES], p, 4, |
| &mck_layout, &mck_characteristics, |
| tmpclkmux); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MCK_PRES), c); |
| |
| /* Register MCK div clock. */ |
| c = at91_clk_register_master_div(base, clk_names[ID_MCK_DIV], |
| clk_names[ID_MCK_PRES], |
| &mck_layout, &mck_characteristics); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MCK_DIV), c); |
| |
| /* Register usbck. */ |
| p[0] = clk_names[ID_PLL_A_DIV]; |
| p[1] = clk_names[ID_PLL_U_DIV]; |
| p[2] = clk_names[ID_MAIN_XTAL]; |
| m[0] = 0; |
| m[1] = 1; |
| m[2] = 2; |
| cm[0] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_A_DIV); |
| cm[1] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_U_DIV); |
| cm[2] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAIN_XTAL); |
| prepare_mux_table(clkmuxallocs, clkmuxallocindex, tmpclkmux, cm, |
| 3, fail); |
| prepare_mux_table(muxallocs, muxallocindex, tmpmux, m, 3, fail); |
| c = sam9x60_clk_register_usb(base, clk_names[ID_USBCK], p, 3, |
| &usbck_layout, tmpclkmux, tmpmux, |
| ID_USBCK); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_USBCK), c); |
| |
| /* Register programmable clocks. */ |
| p[0] = clk_names[ID_MD_SLCK]; |
| p[1] = clk_names[ID_TD_SLCK]; |
| p[2] = clk_names[ID_MAINCK]; |
| p[3] = clk_names[ID_MCK_DIV]; |
| p[4] = clk_names[ID_PLL_A_DIV]; |
| p[5] = clk_names[ID_PLL_U_DIV]; |
| cm[0] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MD_SLCK); |
| cm[1] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_TD_SLCK); |
| cm[2] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAINCK); |
| cm[3] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MCK_DIV); |
| cm[4] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_A_DIV); |
| cm[5] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_U_DIV); |
| for (i = 0; i < ARRAY_SIZE(sam9x60_prog); i++) { |
| prepare_mux_table(clkmuxallocs, clkmuxallocindex, tmpclkmux, cm, |
| 6, fail); |
| |
| c = at91_clk_register_programmable(base, sam9x60_prog[i].n, p, |
| 10, i, &programmable_layout, |
| tmpclkmux, |
| sam9x60_prog_mux_table); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, sam9x60_prog[i].cid), c); |
| } |
| |
| /* System clocks. */ |
| for (i = 0; i < ARRAY_SIZE(sam9x60_systemck); i++) { |
| c = at91_clk_register_system(base, sam9x60_systemck[i].n, |
| sam9x60_systemck[i].p, |
| sam9x60_systemck[i].id); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_SYSTEM, sam9x60_systemck[i].cid), |
| c); |
| } |
| |
| /* Peripheral clocks. */ |
| for (i = 0; i < ARRAY_SIZE(sam9x60_periphck); i++) { |
| c = at91_clk_register_sam9x5_peripheral(base, &pcr_layout, |
| sam9x60_periphck[i].n, |
| clk_names[ID_MCK_DIV], |
| sam9x60_periphck[i].id, |
| &r); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_PERIPHERAL, |
| sam9x60_periphck[i].id), c); |
| } |
| |
| /* Generic clocks. */ |
| p[0] = clk_names[ID_MD_SLCK]; |
| p[1] = clk_names[ID_TD_SLCK]; |
| p[2] = clk_names[ID_MAINCK]; |
| p[3] = clk_names[ID_MCK_DIV]; |
| p[4] = clk_names[ID_PLL_A_DIV]; |
| p[5] = clk_names[ID_PLL_U_DIV]; |
| m[0] = 0; |
| m[1] = 1; |
| m[2] = 2; |
| m[3] = 3; |
| m[4] = 4; |
| m[5] = 5; |
| cm[0] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MD_SLCK); |
| cm[1] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_TD_SLCK); |
| cm[2] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAINCK); |
| cm[3] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MCK_DIV); |
| cm[4] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_A_DIV); |
| cm[5] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_U_DIV); |
| for (i = 0; i < ARRAY_SIZE(sam9x60_gck); i++) { |
| prepare_mux_table(clkmuxallocs, clkmuxallocindex, tmpclkmux, cm, |
| 6, fail); |
| prepare_mux_table(muxallocs, muxallocindex, tmpmux, m, |
| 6, fail); |
| |
| c = at91_clk_register_generic(base, &pcr_layout, |
| sam9x60_gck[i].n, p, tmpclkmux, |
| tmpmux, 6, sam9x60_gck[i].id, |
| &sam9x60_gck[i].r); |
| if (IS_ERR(c)) { |
| ret = PTR_ERR(c); |
| goto fail; |
| } |
| clk_dm(AT91_TO_CLK_ID(PMC_TYPE_GCK, sam9x60_gck[i].id), c); |
| } |
| |
| /* Setup clocks. */ |
| ret = at91_clk_setup(sam9x60_clk_setup, ARRAY_SIZE(sam9x60_clk_setup)); |
| if (ret) |
| goto fail; |
| |
| return 0; |
| |
| fail: |
| for (i = 0; i < ARRAY_SIZE(muxallocs); i++) |
| kfree(muxallocs[i]); |
| |
| for (i = 0; i < ARRAY_SIZE(clkmuxallocs); i++) |
| kfree(clkmuxallocs[i]); |
| |
| return ret; |
| } |
| |
| static const struct udevice_id sam9x60_clk_ids[] = { |
| { .compatible = "microchip,sam9x60-pmc" }, |
| { /* Sentinel. */ }, |
| }; |
| |
| U_BOOT_DRIVER(at91_sam9x60_pmc) = { |
| .name = "at91-sam9x60-pmc", |
| .id = UCLASS_CLK, |
| .of_match = sam9x60_clk_ids, |
| .ops = &at91_clk_ops, |
| .probe = sam9x60_clk_probe, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |