arch/arm/dts/k3-j721e-beagleboneai64-u-boot.dtsi

// SPDX-License-Identifier: GPL-2.0
/*
 * https://beagleboard.org/ai-64
 *
 * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
 * Copyright (C) 2022 Jason Kridner, BeagleBoard.org Foundation
 * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation
 */

#include "k3-binman.dtsi"

/ {
	memory@80000000 {
		bootph-all;
	};

	/* Keep the LEDs on by default to indicate life */
	leds {
		bootph-all;
		led-0 {
			default-state = "on";
			bootph-all;
		};

		led-1 {
			default-state = "on";
			bootph-all;
		};

		led-2 {
			default-state = "on";
			bootph-all;
		};

		led-3 {
			default-state = "on";
			bootph-all;
		};

		led-4 {
			default-state = "on";
			bootph-all;
		};
	};
};

&cbass_main {
	bootph-all;
};

&main_navss {
	bootph-all;
};

&cbass_mcu_wakeup {
	bootph-all;

	chipid@43000014 {
		bootph-all;
	};
};

&mcu_navss {
	bootph-all;
};

&mcu_ringacc {
	reg = <0x0 0x2b800000 0x0 0x400000>,
		<0x0 0x2b000000 0x0 0x400000>,
		<0x0 0x28590000 0x0 0x100>,
		<0x0 0x2a500000 0x0 0x40000>,
		<0x0 0x28440000 0x0 0x40000>;
	reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
	bootph-all;
};

&mcu_udmap {
	reg = <0x0 0x285c0000 0x0 0x100>,
		<0x0 0x284c0000 0x0 0x4000>,
		<0x0 0x2a800000 0x0 0x40000>,
		<0x0 0x284a0000 0x0 0x4000>,
		<0x0 0x2aa00000 0x0 0x40000>,
		<0x0 0x28400000 0x0 0x2000>;
	reg-names = "gcfg", "rchan", "rchanrt", "tchan",
		"tchanrt", "rflow";
	bootph-all;
};

&secure_proxy_main {
	bootph-all;
};

&dmsc {
	bootph-all;
};

&k3_pds {
	bootph-all;
};

&k3_clks {
	bootph-all;
};

&k3_reset {
	bootph-all;
};

&wkup_pmx0 {
	bootph-all;
};

&main_pmx0 {
	bootph-all;
};

&main_uart0 {
	bootph-all;
};

&main_gpio0 {
	bootph-all;
};

&main_uart0_pins_default {
	bootph-all;
};

&main_sdhci0 {
	bootph-all;
};

&main_sdhci1 {
	bootph-all;
	sdhci-caps-mask = <0x00000007 0x00000000>;
	/delete-property/ cd-gpios;
	/delete-property/ cd-debounce-delay-ms;
	/delete-property/ ti,fails-without-test-cd;
	/delete-property/ no-1-8-v;
};

&main_mmc1_pins_default {
	bootph-all;
};

&mcu_cpsw {
	bootph-all;
};

&davinci_mdio {
	bootph-all;
};

&phy0 {
	bootph-all;
};

&serdes2 {
	bootph-all;
};

&serdes_ln_ctrl {
	bootph-all;
};

&serdes2_usb_link {
	bootph-all;
};

&usb_serdes_mux {
	bootph-all;
};

&serdes_wiz2 {
	bootph-all;
};

&main_usbss1_pins_default {
	bootph-all;
};

&mcu_usbss1_pins_default {
	bootph-all;
};

&usbss1 {
	bootph-all;
};

&usb1 {
	bootph-all;
};

&wkup_i2c0_pins_default {
	bootph-all;
};

&wkup_i2c0 {
	bootph-all;
};

#ifdef CONFIG_TARGET_J721E_A72_BEAGLEBONEAI64

#define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
#define SPL_J721E_BBAI64_DTB "spl/dts/k3-j721e-beagleboneai64.dtb"

#define UBOOT_NODTB "u-boot-nodtb.bin"
#define J721E_BBAI64_DTB "arch/arm/dts/k3-j721e-beagleboneai64.dtb"

&binman {
	ti-dm {
		filename = "ti-dm.bin";
		blob-ext {
			filename = "ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f";
		};
	};

	ti-spl_unsigned {
		filename = "tispl.bin_unsigned";
		pad-byte = <0xff>;

		fit {
			description = "Configuration to load ATF and SPL";
			#address-cells = <1>;

			images {

				atf {
					description = "ARM Trusted Firmware";
					type = "firmware";
					arch = "arm64";
					compression = "none";
					os = "arm-trusted-firmware";
					load = <CONFIG_K3_ATF_LOAD_ADDR>;
					entry = <CONFIG_K3_ATF_LOAD_ADDR>;
					atf-bl31 {
						filename = "bl31.bin";
					};
				};

				tee {
					description = "OP-TEE";
					type = "tee";
					arch = "arm64";
					compression = "none";
					os = "tee";
					load = <CONFIG_K3_OPTEE_LOAD_ADDR>;
					entry = <CONFIG_K3_OPTEE_LOAD_ADDR>;
					tee-os {
						filename = "tee-raw.bin";
					};
				};

				dm {
					description = "DM binary";
					type = "firmware";
					arch = "arm32";
					compression = "none";
					os = "DM";
					load = <0x89000000>;
					entry = <0x89000000>;
					blob-ext {
						filename = "ti-dm.bin";
					};
				};

				spl {
					description = "SPL (64-bit)";
					type = "standalone";
					os = "U-Boot";
					arch = "arm64";
					compression = "none";
					load = <CONFIG_SPL_TEXT_BASE>;
					entry = <CONFIG_SPL_TEXT_BASE>;
					blob-ext {
						filename = SPL_NODTB;
					};
				};

				fdt-0 {
					description = "k3-j721e-beagleboneai64";
					type = "flat_dt";
					arch = "arm";
					compression = "none";
					blob {
						filename = SPL_J721E_BBAI64_DTB;
					};
				};
			};

			configurations {
				default = "conf-0";

				conf-0 {
					description = "k3-j721e-beagleboneai64";
					firmware = "atf";
					loadables = "tee", "dm", "spl";
					fdt = "fdt-0";
				};
			};
		};
	};

	u-boot_unsigned {
		filename = "u-boot.img_unsigned";
		pad-byte = <0xff>;

		fit {
			description = "FIT image with multiple configurations";

			images {
				uboot {
					description = "U-Boot for j721e board";
					type = "firmware";
					os = "u-boot";
					arch = "arm";
					compression = "none";
					load = <CONFIG_TEXT_BASE>;
					blob {
						filename = UBOOT_NODTB;
					};
					hash {
						algo = "crc32";
					};
				};

				fdt-0 {
					description = "k3-j721e-beagleboneai64";
					type = "flat_dt";
					arch = "arm";
					compression = "none";
					blob {
						filename = J721E_BBAI64_DTB;
					};
					hash {
						algo = "crc32";
					};
				};
			};

			configurations {
				default = "conf-0";

				conf-0 {
					description = "k3-j721e-beagleboneai64";
					firmware = "uboot";
					loadables = "uboot";
					fdt = "fdt-0";
				};
			};
		};
	};
};

#include "k3-binman-capsule.dtsi"

// Capsule update GUIDs in string form.  See beagleboneai64.h
#define BEAGLEBONEAI64_SPL_IMAGE_GUID_STR "83447222-1e26-40cd-a395-b7de0957e875"
#define BEAGLEBONEAI64_UBOOT_IMAGE_GUID_STR "4249ff77-c17d-4eb7-a1db-45aa9887d49e"

&capsule_tispl {
	efi-capsule {
		image-guid = BEAGLEBONEAI64_SPL_IMAGE_GUID_STR;

		blob {
			filename = "tispl.bin_unsigned";
		};
	};
};

&capsule_uboot {
	efi-capsule {
		image-guid = BEAGLEBONEAI64_UBOOT_IMAGE_GUID_STR;
	};
};

#endif