S5PC2XX: Rename S5pc2XX to exynos
As per new naming convention for Samsung SoC's, all Cortex-A9 and Cortex-A15
based SoC's will be classified under the name Exynos. Cortex-A9 and Cortex-A15
based SoC's will be sub-classified as Exynos4 and Exynos5 respectively.
In order to better adapt and reuse code across various upcoming Samsung Exynos
based boards, all uses of s5pc210 prefix/suffix/directory-names are renamed in
this patch. s5pc210 is renamed as exynos4210 and S5PC210/s5pc210 suffix/prefix
are renamed as exynos4/EXYNOS4.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
diff --git a/board/samsung/smdkv310/lowlevel_init.S b/board/samsung/smdkv310/lowlevel_init.S
index 58b737b..7a1ea98 100644
--- a/board/samsung/smdkv310/lowlevel_init.S
+++ b/board/samsung/smdkv310/lowlevel_init.S
@@ -1,5 +1,5 @@
/*
- * Lowlevel setup for SMDKV310 board based on S5PC210
+ * Lowlevel setup for SMDKV310 board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
@@ -45,11 +45,11 @@
/* r5 has always zero */
mov r5, #0
- ldr r7, =S5PC210_GPIO_PART1_BASE
- ldr r6, =S5PC210_GPIO_PART2_BASE
+ ldr r7, =EXYNOS4_GPIO_PART1_BASE
+ ldr r6, =EXYNOS4_GPIO_PART2_BASE
/* check reset status */
- ldr r0, =(S5PC210_POWER_BASE + 0x81C) @ INFORM7
+ ldr r0, =(EXYNOS4_POWER_BASE + 0x81C) @ INFORM7
ldr r1, [r0]
/* AFTR wakeup reset */
@@ -95,9 +95,9 @@
exit_wakeup:
/* Load return address and jump to kernel */
- ldr r0, =(S5PC210_POWER_BASE + 0x800) @ INFORM0
+ ldr r0, =(EXYNOS4_POWER_BASE + 0x800) @ INFORM0
- /* r1 = physical address of s5pc210_cpu_resume function */
+ /* r1 = physical address of exynos4210_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel*/
@@ -111,7 +111,7 @@
*/
system_clock_init:
push {lr}
- ldr r0, =S5PC210_CLOCK_BASE
+ ldr r0, =EXYNOS4_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =0x0101
@@ -388,12 +388,12 @@
/* setup UART0-UART3 GPIOs (part1) */
mov r0, r7
ldr r1, =0x22222222
- str r1, [r0, #0x00] @ S5PC210_GPIO_A0_OFFSET
+ str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET
ldr r1, =0x00222222
- str r1, [r0, #0x20] @ S5PC210_GPIO_A1_OFFSET
+ str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET
- ldr r0, =S5PC210_UART_BASE
- add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
+ ldr r0, =EXYNOS4_UART_BASE
+ add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
ldr r1, =0x3C5
str r1, [r0, #0x4]