| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2008 Semihalf |
| * |
| * (C) Copyright 2000-2009 |
| * DENX Software Engineering |
| * Wolfgang Denk, wd@denx.de |
| */ |
| |
| #include "imagetool.h" |
| #include "mkimage.h" |
| #include "imximage.h" |
| #include <image.h> |
| #include <version.h> |
| #ifdef __linux__ |
| #include <sys/ioctl.h> |
| #endif |
| |
| static void copy_file(int, const char *, int); |
| |
| /* parameters initialized by core will be used by the image type code */ |
| static struct image_tool_params params = { |
| .os = IH_OS_LINUX, |
| .arch = IH_ARCH_PPC, |
| .type = IH_TYPE_KERNEL, |
| .comp = IH_COMP_GZIP, |
| .dtc = MKIMAGE_DEFAULT_DTC_OPTIONS, |
| .imagename = "", |
| .imagename2 = "", |
| }; |
| |
| static enum ih_category cur_category; |
| |
| static int h_compare_category_name(const void *vtype1, const void *vtype2) |
| { |
| const int *type1 = vtype1; |
| const int *type2 = vtype2; |
| const char *name1 = genimg_get_cat_short_name(cur_category, *type1); |
| const char *name2 = genimg_get_cat_short_name(cur_category, *type2); |
| |
| return strcmp(name1, name2); |
| } |
| |
| static int show_valid_options(enum ih_category category) |
| { |
| int *order; |
| int count; |
| int item; |
| int i; |
| |
| count = genimg_get_cat_count(category); |
| order = calloc(count, sizeof(*order)); |
| if (!order) |
| return -ENOMEM; |
| |
| /* Sort the names in order of short name for easier reading */ |
| for (i = 0, item = 0; i < count; i++, item++) { |
| while (!genimg_cat_has_id(category, item) && i < count) { |
| item++; |
| count--; |
| } |
| order[i] = item; |
| } |
| cur_category = category; |
| qsort(order, count, sizeof(int), h_compare_category_name); |
| |
| fprintf(stderr, "\nInvalid %s, supported are:\n", |
| genimg_get_cat_desc(category)); |
| for (i = 0; i < count; i++) { |
| item = order[i]; |
| fprintf(stderr, "\t%-15s %s\n", |
| genimg_get_cat_short_name(category, item), |
| genimg_get_cat_name(category, item)); |
| } |
| fprintf(stderr, "\n"); |
| free(order); |
| |
| return 0; |
| } |
| |
| static void usage(const char *msg) |
| { |
| fprintf(stderr, "Error: %s\n", msg); |
| fprintf(stderr, "Usage: %s -l image\n" |
| " -l ==> list image header information\n", |
| params.cmdname); |
| fprintf(stderr, |
| " %s [-x] -A arch -O os -T type -C comp -a addr -e ep -n name -d data_file[:data_file...] image\n" |
| " -A ==> set architecture to 'arch'\n" |
| " -O ==> set operating system to 'os'\n" |
| " -T ==> set image type to 'type'\n" |
| " -C ==> set compression type 'comp'\n" |
| " -a ==> set load address to 'addr' (hex)\n" |
| " -e ==> set entry point to 'ep' (hex)\n" |
| " -n ==> set image name to 'name'\n" |
| " -d ==> use image data from 'datafile'\n" |
| " -x ==> set XIP (execute in place)\n", |
| params.cmdname); |
| fprintf(stderr, |
| " %s [-D dtc_options] [-f fit-image.its|-f auto|-F] [-b <dtb> [-b <dtb>]] [-E] [-B size] [-i <ramdisk.cpio.gz>] fit-image\n" |
| " <dtb> file is used with -f auto, it may occur multiple times.\n", |
| params.cmdname); |
| fprintf(stderr, |
| " -D => set all options for device tree compiler\n" |
| " -f => input filename for FIT source\n" |
| " -i => input filename for ramdisk file\n" |
| " -E => place data outside of the FIT structure\n" |
| " -B => align size in hex for FIT structure and header\n"); |
| #ifdef CONFIG_FIT_SIGNATURE |
| fprintf(stderr, |
| "Signing / verified boot options: [-k keydir] [-K dtb] [ -c <comment>] [-p addr] [-r] [-N engine]\n" |
| " -k => set directory containing private keys\n" |
| " -K => write public keys to this .dtb file\n" |
| " -G => use this signing key (in lieu of -k)\n" |
| " -c => add comment in signature node\n" |
| " -F => re-sign existing FIT image\n" |
| " -p => place external data at a static position\n" |
| " -r => mark keys used as 'required' in dtb\n" |
| " -N => openssl engine to use for signing\n"); |
| #else |
| fprintf(stderr, |
| "Signing / verified boot not supported (CONFIG_FIT_SIGNATURE undefined)\n"); |
| #endif |
| fprintf(stderr, " %s -V ==> print version information and exit\n", |
| params.cmdname); |
| fprintf(stderr, "Use '-T list' to see a list of available image types\n"); |
| |
| exit(EXIT_FAILURE); |
| } |
| |
| static int add_content(int type, const char *fname) |
| { |
| struct content_info *cont; |
| |
| cont = calloc(1, sizeof(*cont)); |
| if (!cont) |
| return -1; |
| cont->type = type; |
| cont->fname = fname; |
| if (params.content_tail) |
| params.content_tail->next = cont; |
| else |
| params.content_head = cont; |
| params.content_tail = cont; |
| |
| return 0; |
| } |
| |
| static void process_args(int argc, char **argv) |
| { |
| char *ptr; |
| int type = IH_TYPE_INVALID; |
| char *datafile = NULL; |
| int opt; |
| |
| while ((opt = getopt(argc, argv, |
| "a:A:b:B:c:C:d:D:e:Ef:FG:k:i:K:ln:N:p:o:O:rR:qstT:vVx")) != -1) { |
| switch (opt) { |
| case 'a': |
| params.addr = strtoull(optarg, &ptr, 16); |
| if (*ptr) { |
| fprintf(stderr, "%s: invalid load address %s\n", |
| params.cmdname, optarg); |
| exit(EXIT_FAILURE); |
| } |
| break; |
| case 'A': |
| params.arch = genimg_get_arch_id(optarg); |
| if (params.arch < 0) { |
| show_valid_options(IH_ARCH); |
| usage("Invalid architecture"); |
| } |
| break; |
| case 'b': |
| if (add_content(IH_TYPE_FLATDT, optarg)) { |
| fprintf(stderr, |
| "%s: Out of memory adding content '%s'", |
| params.cmdname, optarg); |
| exit(EXIT_FAILURE); |
| } |
| break; |
| case 'B': |
| params.bl_len = strtoull(optarg, &ptr, 16); |
| if (*ptr) { |
| fprintf(stderr, "%s: invalid block length %s\n", |
| params.cmdname, optarg); |
| exit(EXIT_FAILURE); |
| } |
| |
| break; |
| case 'c': |
| params.comment = optarg; |
| break; |
| case 'C': |
| params.comp = genimg_get_comp_id(optarg); |
| if (params.comp < 0) { |
| show_valid_options(IH_COMP); |
| usage("Invalid compression type"); |
| } |
| break; |
| case 'd': |
| params.datafile = optarg; |
| params.dflag = 1; |
| break; |
| case 'D': |
| params.dtc = optarg; |
| break; |
| case 'e': |
| params.ep = strtoull(optarg, &ptr, 16); |
| if (*ptr) { |
| fprintf(stderr, "%s: invalid entry point %s\n", |
| params.cmdname, optarg); |
| exit(EXIT_FAILURE); |
| } |
| params.eflag = 1; |
| break; |
| case 'E': |
| params.external_data = true; |
| break; |
| case 'f': |
| datafile = optarg; |
| params.auto_its = !strcmp(datafile, "auto"); |
| /* fallthrough */ |
| case 'F': |
| /* |
| * The flattened image tree (FIT) format |
| * requires a flattened device tree image type |
| */ |
| params.type = IH_TYPE_FLATDT; |
| params.fflag = 1; |
| break; |
| case 'G': |
| params.keyfile = optarg; |
| break; |
| case 'i': |
| params.fit_ramdisk = optarg; |
| break; |
| case 'k': |
| params.keydir = optarg; |
| break; |
| case 'K': |
| params.keydest = optarg; |
| break; |
| case 'l': |
| params.lflag = 1; |
| break; |
| case 'n': |
| params.imagename = optarg; |
| break; |
| case 'N': |
| params.engine_id = optarg; |
| break; |
| case 'o': |
| params.algo_name = optarg; |
| break; |
| case 'O': |
| params.os = genimg_get_os_id(optarg); |
| if (params.os < 0) { |
| show_valid_options(IH_OS); |
| usage("Invalid operating system"); |
| } |
| break; |
| case 'p': |
| params.external_offset = strtoull(optarg, &ptr, 16); |
| if (*ptr) { |
| fprintf(stderr, "%s: invalid offset size %s\n", |
| params.cmdname, optarg); |
| exit(EXIT_FAILURE); |
| } |
| break; |
| case 'q': |
| params.quiet = 1; |
| break; |
| case 'r': |
| params.require_keys = 1; |
| break; |
| case 'R': |
| /* |
| * This entry is for the second configuration |
| * file, if only one is not enough. |
| */ |
| params.imagename2 = optarg; |
| break; |
| case 's': |
| params.skipcpy = 1; |
| break; |
| case 't': |
| params.reset_timestamp = 1; |
| break; |
| case 'T': |
| if (strcmp(optarg, "list") == 0) { |
| show_valid_options(IH_TYPE); |
| exit(EXIT_SUCCESS); |
| } |
| type = genimg_get_type_id(optarg); |
| if (type < 0) { |
| show_valid_options(IH_TYPE); |
| usage("Invalid image type"); |
| } |
| break; |
| case 'v': |
| params.vflag++; |
| break; |
| case 'V': |
| printf("mkimage version %s\n", PLAIN_VERSION); |
| exit(EXIT_SUCCESS); |
| case 'x': |
| params.xflag++; |
| break; |
| default: |
| usage("Invalid option"); |
| } |
| } |
| |
| /* The last parameter is expected to be the imagefile */ |
| if (optind < argc) |
| params.imagefile = argv[optind]; |
| |
| /* |
| * For auto-generated FIT images we need to know the image type to put |
| * in the FIT, which is separate from the file's image type (which |
| * will always be IH_TYPE_FLATDT in this case). |
| */ |
| if (params.type == IH_TYPE_FLATDT) { |
| params.fit_image_type = type ? type : IH_TYPE_KERNEL; |
| /* For auto_its, datafile is always 'auto' */ |
| if (!params.auto_its) |
| params.datafile = datafile; |
| else if (!params.datafile) |
| usage("Missing data file for auto-FIT (use -d)"); |
| } else if (type != IH_TYPE_INVALID) { |
| if (type == IH_TYPE_SCRIPT && !params.datafile) |
| usage("Missing data file for script (use -d)"); |
| params.type = type; |
| } |
| |
| if (!params.imagefile) |
| usage("Missing output filename"); |
| } |
| |
| int main(int argc, char **argv) |
| { |
| int ifd = -1; |
| struct stat sbuf; |
| char *ptr; |
| int retval = 0; |
| struct image_type_params *tparams = NULL; |
| int pad_len = 0; |
| int dfd; |
| size_t map_len; |
| |
| params.cmdname = *argv; |
| params.addr = 0; |
| params.ep = 0; |
| |
| process_args(argc, argv); |
| |
| /* set tparams as per input type_id */ |
| tparams = imagetool_get_type(params.type); |
| if (tparams == NULL) { |
| fprintf (stderr, "%s: unsupported type %s\n", |
| params.cmdname, genimg_get_type_name(params.type)); |
| exit (EXIT_FAILURE); |
| } |
| |
| /* |
| * check the passed arguments parameters meets the requirements |
| * as per image type to be generated/listed |
| */ |
| if (tparams->check_params) |
| if (tparams->check_params (¶ms)) |
| usage("Bad parameters for image type"); |
| |
| if (!params.eflag) { |
| params.ep = params.addr; |
| /* If XIP, entry point must be after the U-Boot header */ |
| if (params.xflag) |
| params.ep += tparams->header_size; |
| } |
| |
| if (params.fflag){ |
| if (tparams->fflag_handle) |
| /* |
| * in some cases, some additional processing needs |
| * to be done if fflag is defined |
| * |
| * For ex. fit_handle_file for Fit file support |
| */ |
| retval = tparams->fflag_handle(¶ms); |
| |
| if (retval != EXIT_SUCCESS) |
| exit (retval); |
| } |
| |
| if (params.lflag || params.fflag) { |
| ifd = open (params.imagefile, O_RDONLY|O_BINARY); |
| } else { |
| ifd = open (params.imagefile, |
| O_RDWR|O_CREAT|O_TRUNC|O_BINARY, 0666); |
| } |
| |
| if (ifd < 0) { |
| fprintf (stderr, "%s: Can't open %s: %s\n", |
| params.cmdname, params.imagefile, |
| strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| |
| if (params.lflag || params.fflag) { |
| uint64_t size; |
| /* |
| * list header information of existing image |
| */ |
| if (fstat(ifd, &sbuf) < 0) { |
| fprintf (stderr, "%s: Can't stat %s: %s\n", |
| params.cmdname, params.imagefile, |
| strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| |
| if ((sbuf.st_mode & S_IFMT) == S_IFBLK) { |
| #ifdef __linux__ |
| #if defined(__linux__) && defined(_IOR) && !defined(BLKGETSIZE64) |
| #define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */ |
| #endif |
| if (ioctl(ifd, BLKGETSIZE64, &size) < 0) { |
| fprintf (stderr, |
| "%s: failed to get size of block device \"%s\"\n", |
| params.cmdname, params.imagefile); |
| exit (EXIT_FAILURE); |
| } |
| #else |
| fprintf (stderr, |
| "%s: \"%s\" is block device, don't know how to get its size\n", |
| params.cmdname, params.imagefile); |
| exit (EXIT_FAILURE); |
| #endif |
| } else if ((unsigned)sbuf.st_size < tparams->header_size) { |
| fprintf (stderr, |
| "%s: Bad size: \"%s\" is not valid image: size %ld < %u\n", |
| params.cmdname, params.imagefile, |
| sbuf.st_size, tparams->header_size); |
| exit (EXIT_FAILURE); |
| } else { |
| size = sbuf.st_size; |
| } |
| |
| ptr = mmap(0, size, PROT_READ, MAP_SHARED, ifd, 0); |
| if (ptr == MAP_FAILED) { |
| fprintf (stderr, "%s: Can't read %s: %s\n", |
| params.cmdname, params.imagefile, |
| strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| |
| if (params.fflag) { |
| /* |
| * Verifies the header format based on the expected header for image |
| * type in tparams |
| */ |
| retval = imagetool_verify_print_header_by_type(ptr, &sbuf, |
| tparams, ¶ms); |
| } else { |
| /** |
| * When listing the image, we are not given the image type. Simply check all |
| * image types to find one that matches our header |
| */ |
| retval = imagetool_verify_print_header(ptr, &sbuf, |
| tparams, ¶ms); |
| } |
| |
| (void) munmap((void *)ptr, sbuf.st_size); |
| (void) close (ifd); |
| |
| exit (retval); |
| } |
| |
| if ((params.type != IH_TYPE_MULTI) && (params.type != IH_TYPE_SCRIPT)) { |
| dfd = open(params.datafile, O_RDONLY | O_BINARY); |
| if (dfd < 0) { |
| fprintf(stderr, "%s: Can't open %s: %s\n", |
| params.cmdname, params.datafile, |
| strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| if (fstat(dfd, &sbuf) < 0) { |
| fprintf(stderr, "%s: Can't stat %s: %s\n", |
| params.cmdname, params.datafile, |
| strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| |
| params.file_size = sbuf.st_size + tparams->header_size; |
| close(dfd); |
| } |
| |
| /* |
| * In case there an header with a variable |
| * length will be added, the corresponding |
| * function is called. This is responsible to |
| * allocate memory for the header itself. |
| */ |
| if (tparams->vrec_header) |
| pad_len = tparams->vrec_header(¶ms, tparams); |
| else |
| memset(tparams->hdr, 0, tparams->header_size); |
| |
| if (write(ifd, tparams->hdr, tparams->header_size) |
| != tparams->header_size) { |
| fprintf (stderr, "%s: Write error on %s: %s\n", |
| params.cmdname, params.imagefile, strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| |
| if (!params.skipcpy) { |
| if (params.type == IH_TYPE_MULTI || |
| params.type == IH_TYPE_SCRIPT) { |
| char *file = params.datafile; |
| uint32_t size; |
| |
| for (;;) { |
| char *sep = NULL; |
| |
| if (file) { |
| if ((sep = strchr(file, ':')) != NULL) { |
| *sep = '\0'; |
| } |
| |
| if (stat (file, &sbuf) < 0) { |
| fprintf (stderr, "%s: Can't stat %s: %s\n", |
| params.cmdname, file, strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| size = cpu_to_uimage (sbuf.st_size); |
| } else { |
| size = 0; |
| } |
| |
| if (write(ifd, (char *)&size, sizeof(size)) != sizeof(size)) { |
| fprintf (stderr, "%s: Write error on %s: %s\n", |
| params.cmdname, params.imagefile, |
| strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| |
| if (!file) { |
| break; |
| } |
| |
| if (sep) { |
| *sep = ':'; |
| file = sep + 1; |
| } else { |
| file = NULL; |
| } |
| } |
| |
| file = params.datafile; |
| |
| for (;;) { |
| char *sep = strchr(file, ':'); |
| if (sep) { |
| *sep = '\0'; |
| copy_file (ifd, file, 1); |
| *sep++ = ':'; |
| file = sep; |
| } else { |
| copy_file (ifd, file, 0); |
| break; |
| } |
| } |
| } else if (params.type == IH_TYPE_PBLIMAGE) { |
| /* PBL has special Image format, implements its' own */ |
| pbl_load_uboot(ifd, ¶ms); |
| } else if (params.type == IH_TYPE_ZYNQMPBIF) { |
| /* Image file is meta, walk through actual targets */ |
| int ret; |
| |
| ret = zynqmpbif_copy_image(ifd, ¶ms); |
| if (ret) |
| return ret; |
| } else if (params.type == IH_TYPE_IMX8IMAGE) { |
| /* i.MX8/8X has special Image format */ |
| int ret; |
| |
| ret = imx8image_copy_image(ifd, ¶ms); |
| if (ret) |
| return ret; |
| } else if (params.type == IH_TYPE_IMX8MIMAGE) { |
| /* i.MX8M has special Image format */ |
| int ret; |
| |
| ret = imx8mimage_copy_image(ifd, ¶ms); |
| if (ret) |
| return ret; |
| } else if ((params.type == IH_TYPE_RKSD) || |
| (params.type == IH_TYPE_RKSPI)) { |
| /* Rockchip has special Image format */ |
| int ret; |
| |
| ret = rockchip_copy_image(ifd, ¶ms); |
| if (ret) |
| return ret; |
| } else { |
| copy_file(ifd, params.datafile, pad_len); |
| } |
| if (params.type == IH_TYPE_FIRMWARE_IVT) { |
| /* Add alignment and IVT */ |
| uint32_t aligned_filesize = ALIGN(params.file_size, |
| 0x1000); |
| flash_header_v2_t ivt_header = { { 0xd1, 0x2000, 0x40 }, |
| params.addr, 0, 0, 0, params.addr |
| + aligned_filesize |
| - tparams->header_size, |
| params.addr + aligned_filesize |
| - tparams->header_size |
| + 0x20, 0 }; |
| int i = params.file_size; |
| for (; i < aligned_filesize; i++) { |
| if (write(ifd, (char *) &i, 1) != 1) { |
| fprintf(stderr, |
| "%s: Write error on %s: %s\n", |
| params.cmdname, |
| params.imagefile, |
| strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| } |
| if (write(ifd, &ivt_header, sizeof(flash_header_v2_t)) |
| != sizeof(flash_header_v2_t)) { |
| fprintf(stderr, "%s: Write error on %s: %s\n", |
| params.cmdname, |
| params.imagefile, |
| strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| } |
| } |
| |
| /* We're a bit of paranoid */ |
| #if defined(_POSIX_SYNCHRONIZED_IO) && \ |
| !defined(__sun__) && \ |
| !defined(__FreeBSD__) && \ |
| !defined(__OpenBSD__) && \ |
| !defined(__APPLE__) |
| (void) fdatasync (ifd); |
| #else |
| (void) fsync (ifd); |
| #endif |
| |
| if (fstat(ifd, &sbuf) < 0) { |
| fprintf (stderr, "%s: Can't stat %s: %s\n", |
| params.cmdname, params.imagefile, strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| params.file_size = sbuf.st_size; |
| |
| map_len = sbuf.st_size; |
| ptr = mmap(0, map_len, PROT_READ | PROT_WRITE, MAP_SHARED, ifd, 0); |
| if (ptr == MAP_FAILED) { |
| fprintf (stderr, "%s: Can't map %s: %s\n", |
| params.cmdname, params.imagefile, strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| |
| /* Setup the image header as per input image type*/ |
| if (tparams->set_header) |
| tparams->set_header (ptr, &sbuf, ifd, ¶ms); |
| else { |
| fprintf (stderr, "%s: Can't set header for %s: %s\n", |
| params.cmdname, tparams->name, strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| |
| /* Print the image information by processing image header */ |
| if (tparams->print_header) |
| tparams->print_header (ptr); |
| else { |
| fprintf (stderr, "%s: Can't print header for %s\n", |
| params.cmdname, tparams->name); |
| } |
| |
| (void)munmap((void *)ptr, map_len); |
| |
| /* We're a bit of paranoid */ |
| #if defined(_POSIX_SYNCHRONIZED_IO) && \ |
| !defined(__sun__) && \ |
| !defined(__FreeBSD__) && \ |
| !defined(__OpenBSD__) && \ |
| !defined(__APPLE__) |
| (void) fdatasync (ifd); |
| #else |
| (void) fsync (ifd); |
| #endif |
| |
| if (close(ifd)) { |
| fprintf (stderr, "%s: Write error on %s: %s\n", |
| params.cmdname, params.imagefile, strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| |
| exit (EXIT_SUCCESS); |
| } |
| |
| static void |
| copy_file (int ifd, const char *datafile, int pad) |
| { |
| int dfd; |
| struct stat sbuf; |
| unsigned char *ptr; |
| int tail; |
| int zero = 0; |
| uint8_t zeros[4096]; |
| int offset = 0; |
| int size, ret; |
| struct image_type_params *tparams = imagetool_get_type(params.type); |
| |
| memset(zeros, 0, sizeof(zeros)); |
| |
| if (params.vflag) { |
| fprintf (stderr, "Adding Image %s\n", datafile); |
| } |
| |
| if ((dfd = open(datafile, O_RDONLY|O_BINARY)) < 0) { |
| fprintf (stderr, "%s: Can't open %s: %s\n", |
| params.cmdname, datafile, strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| |
| if (fstat(dfd, &sbuf) < 0) { |
| fprintf (stderr, "%s: Can't stat %s: %s\n", |
| params.cmdname, datafile, strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| |
| if (sbuf.st_size == 0) { |
| fprintf (stderr, "%s: Input file %s is empty, bailing out\n", |
| params.cmdname, datafile); |
| exit (EXIT_FAILURE); |
| } |
| |
| ptr = mmap(0, sbuf.st_size, PROT_READ, MAP_SHARED, dfd, 0); |
| if (ptr == MAP_FAILED) { |
| fprintf (stderr, "%s: Can't read %s: %s\n", |
| params.cmdname, datafile, strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| |
| if (params.xflag) { |
| unsigned char *p = NULL; |
| /* |
| * XIP: do not append the image_header_t at the |
| * beginning of the file, but consume the space |
| * reserved for it. |
| */ |
| |
| if ((unsigned)sbuf.st_size < tparams->header_size) { |
| fprintf (stderr, |
| "%s: Bad size: \"%s\" is too small for XIP\n", |
| params.cmdname, datafile); |
| exit (EXIT_FAILURE); |
| } |
| |
| for (p = ptr; p < ptr + tparams->header_size; p++) { |
| if ( *p != 0xff ) { |
| fprintf (stderr, |
| "%s: Bad file: \"%s\" has invalid buffer for XIP\n", |
| params.cmdname, datafile); |
| exit (EXIT_FAILURE); |
| } |
| } |
| |
| offset = tparams->header_size; |
| } |
| |
| size = sbuf.st_size - offset; |
| |
| ret = write(ifd, ptr + offset, size); |
| if (ret != size) { |
| if (ret < 0) |
| fprintf (stderr, "%s: Write error on %s: %s\n", |
| params.cmdname, params.imagefile, strerror(errno)); |
| else if (ret < size) |
| fprintf (stderr, "%s: Write only %d/%d bytes, "\ |
| "probably no space left on the device\n", |
| params.cmdname, ret, size); |
| exit (EXIT_FAILURE); |
| } |
| |
| tail = size % 4; |
| if ((pad == 1) && (tail != 0)) { |
| |
| if (write(ifd, (char *)&zero, 4-tail) != 4-tail) { |
| fprintf (stderr, "%s: Write error on %s: %s\n", |
| params.cmdname, params.imagefile, |
| strerror(errno)); |
| exit (EXIT_FAILURE); |
| } |
| } else if (pad > 1) { |
| while (pad > 0) { |
| int todo = sizeof(zeros); |
| |
| if (todo > pad) |
| todo = pad; |
| if (write(ifd, (char *)&zeros, todo) != todo) { |
| fprintf(stderr, "%s: Write error on %s: %s\n", |
| params.cmdname, params.imagefile, |
| strerror(errno)); |
| exit(EXIT_FAILURE); |
| } |
| pad -= todo; |
| } |
| } |
| |
| (void) munmap((void *)ptr, sbuf.st_size); |
| (void) close (dfd); |
| } |