| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
| * Copyright (C) 2018 BayLibre, SAS |
| * Author: Neil Armstrong <narmstrong@baylibre.com> |
| * |
| * Amlogic Meson Successive Approximation Register (SAR) A/D Converter |
| */ |
| |
| #include <common.h> |
| #include <adc.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <regmap.h> |
| #include <errno.h> |
| #include <asm/io.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/math64.h> |
| #include <linux/bitfield.h> |
| |
| #define MESON_SAR_ADC_REG0 0x00 |
| #define MESON_SAR_ADC_REG0_PANEL_DETECT BIT(31) |
| #define MESON_SAR_ADC_REG0_BUSY_MASK GENMASK(30, 28) |
| #define MESON_SAR_ADC_REG0_DELTA_BUSY BIT(30) |
| #define MESON_SAR_ADC_REG0_AVG_BUSY BIT(29) |
| #define MESON_SAR_ADC_REG0_SAMPLE_BUSY BIT(28) |
| #define MESON_SAR_ADC_REG0_FIFO_FULL BIT(27) |
| #define MESON_SAR_ADC_REG0_FIFO_EMPTY BIT(26) |
| #define MESON_SAR_ADC_REG0_FIFO_COUNT_MASK GENMASK(25, 21) |
| #define MESON_SAR_ADC_REG0_ADC_BIAS_CTRL_MASK GENMASK(20, 19) |
| #define MESON_SAR_ADC_REG0_CURR_CHAN_ID_MASK GENMASK(18, 16) |
| #define MESON_SAR_ADC_REG0_ADC_TEMP_SEN_SEL BIT(15) |
| #define MESON_SAR_ADC_REG0_SAMPLING_STOP BIT(14) |
| #define MESON_SAR_ADC_REG0_CHAN_DELTA_EN_MASK GENMASK(13, 12) |
| #define MESON_SAR_ADC_REG0_DETECT_IRQ_POL BIT(10) |
| #define MESON_SAR_ADC_REG0_DETECT_IRQ_EN BIT(9) |
| #define MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK GENMASK(8, 4) |
| #define MESON_SAR_ADC_REG0_FIFO_IRQ_EN BIT(3) |
| #define MESON_SAR_ADC_REG0_SAMPLING_START BIT(2) |
| #define MESON_SAR_ADC_REG0_CONTINUOUS_EN BIT(1) |
| #define MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE BIT(0) |
| |
| #define MESON_SAR_ADC_CHAN_LIST 0x04 |
| #define MESON_SAR_ADC_CHAN_LIST_MAX_INDEX_MASK GENMASK(26, 24) |
| #define MESON_SAR_ADC_CHAN_LIST_ENTRY_MASK(_chan) \ |
| (GENMASK(2, 0) << ((_chan) * 3)) |
| |
| #define MESON_SAR_ADC_AVG_CNTL 0x08 |
| #define MESON_SAR_ADC_AVG_CNTL_AVG_MODE_SHIFT(_chan) \ |
| (16 + ((_chan) * 2)) |
| #define MESON_SAR_ADC_AVG_CNTL_AVG_MODE_MASK(_chan) \ |
| (GENMASK(17, 16) << ((_chan) * 2)) |
| #define MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_SHIFT(_chan) \ |
| (0 + ((_chan) * 2)) |
| #define MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_MASK(_chan) \ |
| (GENMASK(1, 0) << ((_chan) * 2)) |
| |
| #define MESON_SAR_ADC_REG3 0x0c |
| #define MESON_SAR_ADC_REG3_CNTL_USE_SC_DLY BIT(31) |
| #define MESON_SAR_ADC_REG3_CLK_EN BIT(30) |
| #define MESON_SAR_ADC_REG3_BL30_INITIALIZED BIT(28) |
| #define MESON_SAR_ADC_REG3_CTRL_CONT_RING_COUNTER_EN BIT(27) |
| #define MESON_SAR_ADC_REG3_CTRL_SAMPLING_CLOCK_PHASE BIT(26) |
| #define MESON_SAR_ADC_REG3_CTRL_CHAN7_MUX_SEL_MASK GENMASK(25, 23) |
| #define MESON_SAR_ADC_REG3_DETECT_EN BIT(22) |
| #define MESON_SAR_ADC_REG3_ADC_EN BIT(21) |
| #define MESON_SAR_ADC_REG3_PANEL_DETECT_COUNT_MASK GENMASK(20, 18) |
| #define MESON_SAR_ADC_REG3_PANEL_DETECT_FILTER_TB_MASK GENMASK(17, 16) |
| #define MESON_SAR_ADC_REG3_ADC_CLK_DIV_SHIFT 10 |
| #define MESON_SAR_ADC_REG3_ADC_CLK_DIV_WIDTH 5 |
| #define MESON_SAR_ADC_REG3_BLOCK_DLY_SEL_MASK GENMASK(9, 8) |
| #define MESON_SAR_ADC_REG3_BLOCK_DLY_MASK GENMASK(7, 0) |
| |
| #define MESON_SAR_ADC_DELAY 0x10 |
| #define MESON_SAR_ADC_DELAY_INPUT_DLY_SEL_MASK GENMASK(25, 24) |
| #define MESON_SAR_ADC_DELAY_BL30_BUSY BIT(15) |
| #define MESON_SAR_ADC_DELAY_KERNEL_BUSY BIT(14) |
| #define MESON_SAR_ADC_DELAY_INPUT_DLY_CNT_MASK GENMASK(23, 16) |
| #define MESON_SAR_ADC_DELAY_SAMPLE_DLY_SEL_MASK GENMASK(9, 8) |
| #define MESON_SAR_ADC_DELAY_SAMPLE_DLY_CNT_MASK GENMASK(7, 0) |
| |
| #define MESON_SAR_ADC_LAST_RD 0x14 |
| #define MESON_SAR_ADC_LAST_RD_LAST_CHANNEL1_MASK GENMASK(23, 16) |
| #define MESON_SAR_ADC_LAST_RD_LAST_CHANNEL0_MASK GENMASK(9, 0) |
| |
| #define MESON_SAR_ADC_FIFO_RD 0x18 |
| #define MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK GENMASK(14, 12) |
| #define MESON_SAR_ADC_FIFO_RD_SAMPLE_VALUE_MASK GENMASK(11, 0) |
| |
| #define MESON_SAR_ADC_AUX_SW 0x1c |
| #define MESON_SAR_ADC_AUX_SW_MUX_SEL_CHAN_SHIFT(_chan) \ |
| (8 + (((_chan) - 2) * 3)) |
| #define MESON_SAR_ADC_AUX_SW_VREF_P_MUX BIT(6) |
| #define MESON_SAR_ADC_AUX_SW_VREF_N_MUX BIT(5) |
| #define MESON_SAR_ADC_AUX_SW_MODE_SEL BIT(4) |
| #define MESON_SAR_ADC_AUX_SW_YP_DRIVE_SW BIT(3) |
| #define MESON_SAR_ADC_AUX_SW_XP_DRIVE_SW BIT(2) |
| #define MESON_SAR_ADC_AUX_SW_YM_DRIVE_SW BIT(1) |
| #define MESON_SAR_ADC_AUX_SW_XM_DRIVE_SW BIT(0) |
| |
| #define MESON_SAR_ADC_CHAN_10_SW 0x20 |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK GENMASK(25, 23) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN1_VREF_P_MUX BIT(22) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN1_VREF_N_MUX BIT(21) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN1_MODE_SEL BIT(20) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW BIT(19) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW BIT(18) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN1_YM_DRIVE_SW BIT(17) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN1_XM_DRIVE_SW BIT(16) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN0_MUX_SEL_MASK GENMASK(9, 7) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN0_VREF_P_MUX BIT(6) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN0_VREF_N_MUX BIT(5) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN0_MODE_SEL BIT(4) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW BIT(3) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW BIT(2) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN0_YM_DRIVE_SW BIT(1) |
| #define MESON_SAR_ADC_CHAN_10_SW_CHAN0_XM_DRIVE_SW BIT(0) |
| |
| #define MESON_SAR_ADC_DETECT_IDLE_SW 0x24 |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_SW_EN BIT(26) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_MUX_MASK GENMASK(25, 23) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_VREF_P_MUX BIT(22) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_VREF_N_MUX BIT(21) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_SEL BIT(20) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_YP_DRIVE_SW BIT(19) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_XP_DRIVE_SW BIT(18) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_YM_DRIVE_SW BIT(17) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_XM_DRIVE_SW BIT(16) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_MUX_SEL_MASK GENMASK(9, 7) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_VREF_P_MUX BIT(6) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_VREF_N_MUX BIT(5) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_SEL BIT(4) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_YP_DRIVE_SW BIT(3) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_XP_DRIVE_SW BIT(2) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_YM_DRIVE_SW BIT(1) |
| #define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_XM_DRIVE_SW BIT(0) |
| |
| #define MESON_SAR_ADC_DELTA_10 0x28 |
| #define MESON_SAR_ADC_DELTA_10_TEMP_SEL BIT(27) |
| #define MESON_SAR_ADC_DELTA_10_TS_REVE1 BIT(26) |
| #define MESON_SAR_ADC_DELTA_10_CHAN1_DELTA_VALUE_MASK GENMASK(25, 16) |
| #define MESON_SAR_ADC_DELTA_10_TS_REVE0 BIT(15) |
| #define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT 11 |
| #define MESON_SAR_ADC_DELTA_10_TS_C_MASK GENMASK(14, 11) |
| #define MESON_SAR_ADC_DELTA_10_TS_VBG_EN BIT(10) |
| #define MESON_SAR_ADC_DELTA_10_CHAN0_DELTA_VALUE_MASK GENMASK(9, 0) |
| |
| /* |
| * NOTE: registers from here are undocumented (the vendor Linux kernel driver |
| * and u-boot source served as reference). These only seem to be relevant on |
| * GXBB and newer. |
| */ |
| #define MESON_SAR_ADC_REG11 0x2c |
| #define MESON_SAR_ADC_REG11_BANDGAP_EN BIT(13) |
| |
| #define MESON_SAR_ADC_REG13 0x34 |
| #define MESON_SAR_ADC_REG13_12BIT_CALIBRATION_MASK GENMASK(13, 8) |
| |
| #define MESON_SAR_ADC_MAX_FIFO_SIZE 32 |
| #define MESON_SAR_ADC_TIMEOUT 100 /* ms */ |
| |
| #define NUM_CHANNELS 8 |
| |
| #define MILLION 1000000 |
| |
| struct meson_saradc_data { |
| int num_bits; |
| }; |
| |
| struct meson_saradc_priv { |
| const struct meson_saradc_data *data; |
| struct regmap *regmap; |
| struct clk core_clk; |
| struct clk adc_clk; |
| bool initialized; |
| int active_channel; |
| int calibbias; |
| int calibscale; |
| }; |
| |
| static unsigned int |
| meson_saradc_get_fifo_count(struct meson_saradc_priv *priv) |
| { |
| u32 regval; |
| |
| regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val); |
| |
| return FIELD_GET(MESON_SAR_ADC_REG0_FIFO_COUNT_MASK, regval); |
| } |
| |
| static int meson_saradc_lock(struct meson_saradc_priv *priv) |
| { |
| uint val, timeout = 10000; |
| |
| /* prevent BL30 from using the SAR ADC while we are using it */ |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY, |
| MESON_SAR_ADC_DELAY_KERNEL_BUSY, |
| MESON_SAR_ADC_DELAY_KERNEL_BUSY); |
| |
| /* |
| * wait until BL30 releases it's lock (so we can use the SAR ADC) |
| */ |
| do { |
| udelay(1); |
| regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val); |
| } while (val & MESON_SAR_ADC_DELAY_BL30_BUSY && timeout--); |
| |
| if (timeout < 0) { |
| printf("Timeout while waiting for BL30 unlock\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static void meson_saradc_unlock(struct meson_saradc_priv *priv) |
| { |
| /* allow BL30 to use the SAR ADC again */ |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY, |
| MESON_SAR_ADC_DELAY_KERNEL_BUSY, 0); |
| } |
| |
| static void meson_saradc_clear_fifo(struct meson_saradc_priv *priv) |
| { |
| unsigned int count, tmp; |
| |
| for (count = 0; count < MESON_SAR_ADC_MAX_FIFO_SIZE; count++) { |
| if (!meson_saradc_get_fifo_count(priv)) |
| break; |
| |
| regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, &tmp); |
| } |
| } |
| |
| static int meson_saradc_calib_val(struct meson_saradc_priv *priv, int val) |
| { |
| int tmp; |
| |
| /* use val_calib = scale * val_raw + offset calibration function */ |
| tmp = div_s64((s64)val * priv->calibscale, MILLION) + priv->calibbias; |
| |
| return clamp(tmp, 0, (1 << priv->data->num_bits) - 1); |
| } |
| |
| static int meson_saradc_wait_busy_clear(struct meson_saradc_priv *priv) |
| { |
| uint regval, timeout = 10000; |
| |
| /* |
| * NOTE: we need a small delay before reading the status, otherwise |
| * the sample engine may not have started internally (which would |
| * seem to us that sampling is already finished). |
| */ |
| do { |
| udelay(1); |
| regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val); |
| } while (FIELD_GET(MESON_SAR_ADC_REG0_BUSY_MASK, regval) && timeout--); |
| |
| if (timeout < 0) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static int meson_saradc_read_raw_sample(struct meson_saradc_priv *priv, |
| unsigned int channel, uint *val) |
| { |
| uint regval, fifo_chan, fifo_val, count; |
| int ret; |
| |
| ret = meson_saradc_wait_busy_clear(priv); |
| if (ret) |
| return ret; |
| |
| count = meson_saradc_get_fifo_count(priv); |
| if (count != 1) { |
| printf("ADC FIFO has %d element(s) instead of one\n", count); |
| return -EINVAL; |
| } |
| |
| regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val); |
| fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval); |
| if (fifo_chan != channel) { |
| printf("ADC FIFO entry belongs to channel %u instead of %u\n", |
| fifo_chan, channel); |
| return -EINVAL; |
| } |
| |
| fifo_val = FIELD_GET(MESON_SAR_ADC_FIFO_RD_SAMPLE_VALUE_MASK, regval); |
| fifo_val &= GENMASK(priv->data->num_bits - 1, 0); |
| *val = meson_saradc_calib_val(priv, fifo_val); |
| |
| return 0; |
| } |
| |
| static void meson_saradc_start_sample_engine(struct meson_saradc_priv *priv) |
| { |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0, |
| MESON_SAR_ADC_REG0_FIFO_IRQ_EN, |
| MESON_SAR_ADC_REG0_FIFO_IRQ_EN); |
| |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0, |
| MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE, |
| MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE); |
| |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0, |
| MESON_SAR_ADC_REG0_SAMPLING_START, |
| MESON_SAR_ADC_REG0_SAMPLING_START); |
| } |
| |
| static void meson_saradc_stop_sample_engine(struct meson_saradc_priv *priv) |
| { |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0, |
| MESON_SAR_ADC_REG0_FIFO_IRQ_EN, 0); |
| |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0, |
| MESON_SAR_ADC_REG0_SAMPLING_STOP, |
| MESON_SAR_ADC_REG0_SAMPLING_STOP); |
| |
| /* wait until all modules are stopped */ |
| meson_saradc_wait_busy_clear(priv); |
| |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0, |
| MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE, 0); |
| } |
| |
| enum meson_saradc_avg_mode { |
| NO_AVERAGING = 0x0, |
| MEAN_AVERAGING = 0x1, |
| MEDIAN_AVERAGING = 0x2, |
| }; |
| |
| enum meson_saradc_num_samples { |
| ONE_SAMPLE = 0x0, |
| TWO_SAMPLES = 0x1, |
| FOUR_SAMPLES = 0x2, |
| EIGHT_SAMPLES = 0x3, |
| }; |
| |
| static void meson_saradc_set_averaging(struct meson_saradc_priv *priv, |
| unsigned int channel, |
| enum meson_saradc_avg_mode mode, |
| enum meson_saradc_num_samples samples) |
| { |
| int val; |
| |
| val = samples << MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_SHIFT(channel); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_AVG_CNTL, |
| MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_MASK(channel), |
| val); |
| |
| val = mode << MESON_SAR_ADC_AVG_CNTL_AVG_MODE_SHIFT(channel); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_AVG_CNTL, |
| MESON_SAR_ADC_AVG_CNTL_AVG_MODE_MASK(channel), val); |
| } |
| |
| static void meson_saradc_enable_channel(struct meson_saradc_priv *priv, |
| unsigned int channel) |
| { |
| uint regval; |
| |
| /* |
| * the SAR ADC engine allows sampling multiple channels at the same |
| * time. to keep it simple we're only working with one *internal* |
| * channel, which starts counting at index 0 (which means: count = 1). |
| */ |
| regval = FIELD_PREP(MESON_SAR_ADC_CHAN_LIST_MAX_INDEX_MASK, 0); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_LIST, |
| MESON_SAR_ADC_CHAN_LIST_MAX_INDEX_MASK, regval); |
| |
| /* map channel index 0 to the channel which we want to read */ |
| regval = FIELD_PREP(MESON_SAR_ADC_CHAN_LIST_ENTRY_MASK(0), channel); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_LIST, |
| MESON_SAR_ADC_CHAN_LIST_ENTRY_MASK(0), regval); |
| |
| regval = FIELD_PREP(MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_MUX_MASK, |
| channel); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_DETECT_IDLE_SW, |
| MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_MUX_MASK, |
| regval); |
| |
| regval = FIELD_PREP(MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_MUX_SEL_MASK, |
| channel); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_DETECT_IDLE_SW, |
| MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_MUX_SEL_MASK, |
| regval); |
| |
| if (channel == 6) |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10, |
| MESON_SAR_ADC_DELTA_10_TEMP_SEL, 0); |
| } |
| |
| static int meson_saradc_get_sample(struct meson_saradc_priv *priv, |
| int chan, uint *val) |
| { |
| int ret; |
| |
| ret = meson_saradc_lock(priv); |
| if (ret) |
| return ret; |
| |
| /* clear the FIFO to make sure we're not reading old values */ |
| meson_saradc_clear_fifo(priv); |
| |
| meson_saradc_set_averaging(priv, chan, MEAN_AVERAGING, EIGHT_SAMPLES); |
| |
| meson_saradc_enable_channel(priv, chan); |
| |
| meson_saradc_start_sample_engine(priv); |
| ret = meson_saradc_read_raw_sample(priv, chan, val); |
| meson_saradc_stop_sample_engine(priv); |
| |
| meson_saradc_unlock(priv); |
| |
| if (ret) { |
| printf("failed to read sample for channel %d: %d\n", |
| chan, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int meson_saradc_channel_data(struct udevice *dev, int channel, |
| unsigned int *data) |
| { |
| struct meson_saradc_priv *priv = dev_get_priv(dev); |
| |
| if (channel != priv->active_channel) { |
| pr_err("Requested channel is not active!"); |
| return -EINVAL; |
| } |
| |
| return meson_saradc_get_sample(priv, channel, data); |
| } |
| |
| enum meson_saradc_chan7_mux_sel { |
| CHAN7_MUX_VSS = 0x0, |
| CHAN7_MUX_VDD_DIV4 = 0x1, |
| CHAN7_MUX_VDD_DIV2 = 0x2, |
| CHAN7_MUX_VDD_MUL3_DIV4 = 0x3, |
| CHAN7_MUX_VDD = 0x4, |
| CHAN7_MUX_CH7_INPUT = 0x7, |
| }; |
| |
| static void meson_saradc_set_chan7_mux(struct meson_saradc_priv *priv, |
| enum meson_saradc_chan7_mux_sel sel) |
| { |
| u32 regval; |
| |
| regval = FIELD_PREP(MESON_SAR_ADC_REG3_CTRL_CHAN7_MUX_SEL_MASK, sel); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3, |
| MESON_SAR_ADC_REG3_CTRL_CHAN7_MUX_SEL_MASK, regval); |
| |
| udelay(20); |
| } |
| |
| static int meson_saradc_calib(struct meson_saradc_priv *priv) |
| { |
| uint nominal0, nominal1, value0, value1; |
| int ret; |
| |
| /* use points 25% and 75% for calibration */ |
| nominal0 = (1 << priv->data->num_bits) / 4; |
| nominal1 = (1 << priv->data->num_bits) * 3 / 4; |
| |
| meson_saradc_set_chan7_mux(priv, CHAN7_MUX_VDD_DIV4); |
| udelay(20); |
| ret = meson_saradc_get_sample(priv, 7, &value0); |
| if (ret < 0) |
| goto out; |
| |
| meson_saradc_set_chan7_mux(priv, CHAN7_MUX_VDD_MUL3_DIV4); |
| udelay(20); |
| ret = meson_saradc_get_sample(priv, 7, &value1); |
| if (ret < 0) |
| goto out; |
| |
| if (value1 <= value0) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| priv->calibscale = div_s64((nominal1 - nominal0) * (s64)MILLION, |
| value1 - value0); |
| priv->calibbias = nominal0 - div_s64((s64)value0 * priv->calibscale, |
| MILLION); |
| ret = 0; |
| out: |
| meson_saradc_set_chan7_mux(priv, CHAN7_MUX_CH7_INPUT); |
| |
| return ret; |
| } |
| |
| static int meson_saradc_init(struct meson_saradc_priv *priv) |
| { |
| uint regval; |
| int ret, i; |
| |
| priv->calibscale = MILLION; |
| |
| /* |
| * make sure we start at CH7 input since the other muxes are only used |
| * for internal calibration. |
| */ |
| meson_saradc_set_chan7_mux(priv, CHAN7_MUX_CH7_INPUT); |
| |
| /* |
| * leave sampling delay and the input clocks as configured by |
| * BL30 to make sure BL30 gets the values it expects when |
| * reading the temperature sensor. |
| */ |
| regmap_read(priv->regmap, MESON_SAR_ADC_REG3, ®val); |
| if (regval & MESON_SAR_ADC_REG3_BL30_INITIALIZED) { |
| regmap_read(priv->regmap, MESON_SAR_ADC_REG3, ®val); |
| if (regval & MESON_SAR_ADC_REG3_ADC_EN) |
| return 0; |
| } |
| |
| meson_saradc_stop_sample_engine(priv); |
| |
| /* update the channel 6 MUX to select the temperature sensor */ |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0, |
| MESON_SAR_ADC_REG0_ADC_TEMP_SEN_SEL, |
| MESON_SAR_ADC_REG0_ADC_TEMP_SEN_SEL); |
| |
| /* disable all channels by default */ |
| regmap_write(priv->regmap, MESON_SAR_ADC_CHAN_LIST, 0x0); |
| |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3, |
| MESON_SAR_ADC_REG3_CTRL_SAMPLING_CLOCK_PHASE, 0); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3, |
| MESON_SAR_ADC_REG3_CNTL_USE_SC_DLY, |
| MESON_SAR_ADC_REG3_CNTL_USE_SC_DLY); |
| |
| /* delay between two samples = (10+1) * 1uS */ |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY, |
| MESON_SAR_ADC_DELAY_INPUT_DLY_CNT_MASK, |
| FIELD_PREP(MESON_SAR_ADC_DELAY_SAMPLE_DLY_CNT_MASK, |
| 10)); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY, |
| MESON_SAR_ADC_DELAY_SAMPLE_DLY_SEL_MASK, |
| FIELD_PREP(MESON_SAR_ADC_DELAY_SAMPLE_DLY_SEL_MASK, |
| 0)); |
| |
| /* delay between two samples = (10+1) * 1uS */ |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY, |
| MESON_SAR_ADC_DELAY_INPUT_DLY_CNT_MASK, |
| FIELD_PREP(MESON_SAR_ADC_DELAY_INPUT_DLY_CNT_MASK, |
| 10)); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY, |
| MESON_SAR_ADC_DELAY_INPUT_DLY_SEL_MASK, |
| FIELD_PREP(MESON_SAR_ADC_DELAY_INPUT_DLY_SEL_MASK, |
| 1)); |
| |
| /* |
| * set up the input channel muxes in MESON_SAR_ADC_CHAN_10_SW |
| * (0 = SAR_ADC_CH0, 1 = SAR_ADC_CH1) |
| */ |
| regval = FIELD_PREP(MESON_SAR_ADC_CHAN_10_SW_CHAN0_MUX_SEL_MASK, 0); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW, |
| MESON_SAR_ADC_CHAN_10_SW_CHAN0_MUX_SEL_MASK, |
| regval); |
| regval = FIELD_PREP(MESON_SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK, 1); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW, |
| MESON_SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK, |
| regval); |
| |
| /* |
| * set up the input channel muxes in MESON_SAR_ADC_AUX_SW |
| * (2 = SAR_ADC_CH2, 3 = SAR_ADC_CH3, ...) and enable |
| * MESON_SAR_ADC_AUX_SW_YP_DRIVE_SW and |
| * MESON_SAR_ADC_AUX_SW_XP_DRIVE_SW like the vendor driver. |
| */ |
| regval = 0; |
| for (i = 2; i <= 7; i++) |
| regval |= i << MESON_SAR_ADC_AUX_SW_MUX_SEL_CHAN_SHIFT(i); |
| regval |= MESON_SAR_ADC_AUX_SW_YP_DRIVE_SW; |
| regval |= MESON_SAR_ADC_AUX_SW_XP_DRIVE_SW; |
| regmap_write(priv->regmap, MESON_SAR_ADC_AUX_SW, regval); |
| |
| ret = meson_saradc_lock(priv); |
| if (ret) |
| return ret; |
| |
| #if CONFIG_IS_ENABLED(CLK) |
| ret = clk_enable(&priv->core_clk); |
| if (ret) |
| return ret; |
| #endif |
| |
| regval = FIELD_PREP(MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, 1); |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0, |
| MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, regval); |
| |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11, |
| MESON_SAR_ADC_REG11_BANDGAP_EN, |
| MESON_SAR_ADC_REG11_BANDGAP_EN); |
| |
| regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3, |
| MESON_SAR_ADC_REG3_ADC_EN, |
| MESON_SAR_ADC_REG3_ADC_EN); |
| |
| udelay(5); |
| |
| #if CONFIG_IS_ENABLED(CLK) |
| ret = clk_enable(&priv->adc_clk); |
| if (ret) |
| return ret; |
| #endif |
| |
| meson_saradc_unlock(priv); |
| |
| ret = meson_saradc_calib(priv); |
| if (ret) { |
| printf("calibration failed\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int meson_saradc_start_channel(struct udevice *dev, int channel) |
| { |
| struct meson_saradc_priv *priv = dev_get_priv(dev); |
| |
| if (channel < 0 || channel >= NUM_CHANNELS) { |
| printf("Requested channel is invalid!"); |
| return -EINVAL; |
| } |
| |
| if (!priv->initialized) { |
| int ret; |
| |
| ret = meson_saradc_init(priv); |
| if (ret) |
| return ret; |
| |
| priv->initialized = true; |
| } |
| |
| priv->active_channel = channel; |
| |
| return 0; |
| } |
| |
| static int meson_saradc_stop(struct udevice *dev) |
| { |
| struct meson_saradc_priv *priv = dev_get_priv(dev); |
| |
| priv->active_channel = -1; |
| |
| return 0; |
| } |
| |
| static int meson_saradc_probe(struct udevice *dev) |
| { |
| struct meson_saradc_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap); |
| if (ret) |
| return ret; |
| |
| #if CONFIG_IS_ENABLED(CLK) |
| ret = clk_get_by_name(dev, "core", &priv->core_clk); |
| if (ret) |
| return ret; |
| |
| ret = clk_get_by_name(dev, "adc_clk", &priv->adc_clk); |
| if (ret) |
| return ret; |
| #endif |
| |
| priv->active_channel = -1; |
| |
| return 0; |
| } |
| |
| int meson_saradc_of_to_plat(struct udevice *dev) |
| { |
| struct adc_uclass_plat *uc_pdata = dev_get_uclass_plat(dev); |
| struct meson_saradc_priv *priv = dev_get_priv(dev); |
| |
| priv->data = (struct meson_saradc_data *)dev_get_driver_data(dev); |
| |
| uc_pdata->data_mask = GENMASK(priv->data->num_bits - 1, 0); |
| uc_pdata->data_format = ADC_DATA_FORMAT_BIN; |
| uc_pdata->data_timeout_us = MESON_SAR_ADC_TIMEOUT * 1000; |
| uc_pdata->channel_mask = GENMASK(NUM_CHANNELS - 1, 0); |
| |
| return 0; |
| } |
| |
| static const struct adc_ops meson_saradc_ops = { |
| .start_channel = meson_saradc_start_channel, |
| .channel_data = meson_saradc_channel_data, |
| .stop = meson_saradc_stop, |
| }; |
| |
| static const struct meson_saradc_data gxbb_saradc_data = { |
| .num_bits = 10, |
| }; |
| |
| static const struct meson_saradc_data gxl_saradc_data = { |
| .num_bits = 12, |
| }; |
| |
| static const struct udevice_id meson_saradc_ids[] = { |
| { .compatible = "amlogic,meson-gxbb-saradc", |
| .data = (ulong)&gxbb_saradc_data }, |
| { .compatible = "amlogic,meson-gxl-saradc", |
| .data = (ulong)&gxl_saradc_data }, |
| { .compatible = "amlogic,meson-gxm-saradc", |
| .data = (ulong)&gxl_saradc_data }, |
| { .compatible = "amlogic,meson-g12a-saradc", |
| .data = (ulong)&gxl_saradc_data }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(meson_saradc) = { |
| .name = "meson_saradc", |
| .id = UCLASS_ADC, |
| .of_match = meson_saradc_ids, |
| .ops = &meson_saradc_ops, |
| .probe = meson_saradc_probe, |
| .of_to_plat = meson_saradc_of_to_plat, |
| .priv_auto = sizeof(struct meson_saradc_priv), |
| }; |