drivers/phy/meson-gxl-usb2.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Meson GXL and GXM USB2 PHY driver
  *
  * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
  * Copyright (C) 2018 BayLibre, SAS
  * Author: Neil Armstrong <narmstron@baylibre.com>
  */

 #include <malloc.h>
 #include <asm/io.h>
 #include <bitfield.h>
 #include <clk.h>
 #include <dm.h>
 #include <errno.h>
 #include <generic-phy.h>
 #include <regmap.h>
 #include <linux/delay.h>
 #include <linux/printk.h>
 #include <linux/usb/otg.h>

 #include <asm/arch/usb-gx.h>

 #include <linux/bitops.h>
 #include <linux/compat.h>

 /* bits [31:27] are read-only */
 #define U2P_R0							0x0
 	#define U2P_R0_BYPASS_SEL				BIT(0)
 	#define U2P_R0_BYPASS_DM_EN				BIT(1)
 	#define U2P_R0_BYPASS_DP_EN				BIT(2)
 	#define U2P_R0_TXBITSTUFF_ENH				BIT(3)
 	#define U2P_R0_TXBITSTUFF_EN				BIT(4)
 	#define U2P_R0_DM_PULLDOWN				BIT(5)
 	#define U2P_R0_DP_PULLDOWN				BIT(6)
 	#define U2P_R0_DP_VBUS_VLD_EXT_SEL			BIT(7)
 	#define U2P_R0_DP_VBUS_VLD_EXT				BIT(8)
 	#define U2P_R0_ADP_PRB_EN				BIT(9)
 	#define U2P_R0_ADP_DISCHARGE				BIT(10)
 	#define U2P_R0_ADP_CHARGE				BIT(11)
 	#define U2P_R0_DRV_VBUS					BIT(12)
 	#define U2P_R0_ID_PULLUP				BIT(13)
 	#define U2P_R0_LOOPBACK_EN_B				BIT(14)
 	#define U2P_R0_OTG_DISABLE				BIT(15)
 	#define U2P_R0_COMMON_ONN				BIT(16)
 	#define U2P_R0_FSEL_MASK				GENMASK(19, 17)
 	#define U2P_R0_REF_CLK_SEL_MASK				GENMASK(21, 20)
 	#define U2P_R0_POWER_ON_RESET				BIT(22)
 	#define U2P_R0_V_ATE_TEST_EN_B_MASK			GENMASK(24, 23)
 	#define U2P_R0_ID_SET_ID_DQ				BIT(25)
 	#define U2P_R0_ATE_RESET				BIT(26)
 	#define U2P_R0_FSV_MINUS				BIT(27)
 	#define U2P_R0_FSV_PLUS					BIT(28)
 	#define U2P_R0_BYPASS_DM_DATA				BIT(29)
 	#define U2P_R0_BYPASS_DP_DATA				BIT(30)

 #define U2P_R1							0x4
 	#define U2P_R1_BURN_IN_TEST				BIT(0)
 	#define U2P_R1_ACA_ENABLE				BIT(1)
 	#define U2P_R1_DCD_ENABLE				BIT(2)
 	#define U2P_R1_VDAT_SRC_EN_B				BIT(3)
 	#define U2P_R1_VDAT_DET_EN_B				BIT(4)
 	#define U2P_R1_CHARGES_SEL				BIT(5)
 	#define U2P_R1_TX_PREEMP_PULSE_TUNE			BIT(6)
 	#define U2P_R1_TX_PREEMP_AMP_TUNE_MASK			GENMASK(8, 7)
 	#define U2P_R1_TX_RES_TUNE_MASK				GENMASK(10, 9)
 	#define U2P_R1_TX_RISE_TUNE_MASK			GENMASK(12, 11)
 	#define U2P_R1_TX_VREF_TUNE_MASK			GENMASK(16, 13)
 	#define U2P_R1_TX_FSLS_TUNE_MASK			GENMASK(20, 17)
 	#define U2P_R1_TX_HSXV_TUNE_MASK			GENMASK(22, 21)
 	#define U2P_R1_OTG_TUNE_MASK				GENMASK(25, 23)
 	#define U2P_R1_SQRX_TUNE_MASK				GENMASK(28, 26)
 	#define U2P_R1_COMP_DIS_TUNE_MASK			GENMASK(31, 29)

 /* bits [31:14] are read-only */
 #define U2P_R2							0x8
 	#define U2P_R2_TESTDATA_IN_MASK				GENMASK(7, 0)
 	#define U2P_R2_TESTADDR_MASK				GENMASK(11, 8)
 	#define U2P_R2_TESTDATA_OUT_SEL				BIT(12)
 	#define U2P_R2_TESTCLK					BIT(13)
 	#define U2P_R2_TESTDATA_OUT_MASK			GENMASK(17, 14)
 	#define U2P_R2_ACA_PIN_RANGE_C				BIT(18)
 	#define U2P_R2_ACA_PIN_RANGE_B				BIT(19)
 	#define U2P_R2_ACA_PIN_RANGE_A				BIT(20)
 	#define U2P_R2_ACA_PIN_GND				BIT(21)
 	#define U2P_R2_ACA_PIN_FLOAT				BIT(22)
 	#define U2P_R2_CHARGE_DETECT				BIT(23)
 	#define U2P_R2_DEVICE_SESSION_VALID			BIT(24)
 	#define U2P_R2_ADP_PROBE				BIT(25)
 	#define U2P_R2_ADP_SENSE				BIT(26)
 	#define U2P_R2_SESSION_END				BIT(27)
 	#define U2P_R2_VBUS_VALID				BIT(28)
 	#define U2P_R2_B_VALID					BIT(29)
 	#define U2P_R2_A_VALID					BIT(30)
 	#define U2P_R2_ID_DIG					BIT(31)

 #define U2P_R3							0xc

 #define RESET_COMPLETE_TIME				500

 struct phy_meson_gxl_usb2_priv {
 	struct regmap		*regmap;
 #if CONFIG_IS_ENABLED(CLK)
 	struct clk		clk;
 #endif
 };

 static void phy_meson_gxl_usb2_reset(struct phy_meson_gxl_usb2_priv *priv)
 {
 	uint val;

 	regmap_read(priv->regmap, U2P_R0, &val);

 	/* reset the PHY and wait until settings are stabilized */
 	val |= U2P_R0_POWER_ON_RESET;
 	regmap_write(priv->regmap, U2P_R0, val);
 	udelay(RESET_COMPLETE_TIME);

 	val &= ~U2P_R0_POWER_ON_RESET;
 	regmap_write(priv->regmap, U2P_R0, val);
 	udelay(RESET_COMPLETE_TIME);
 }

 void phy_meson_gxl_usb2_set_mode(struct phy *phy, enum usb_dr_mode mode)
 {
 	struct udevice *dev = phy->dev;
 	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
 	uint val;

 	regmap_read(priv->regmap, U2P_R0, &val);

 	switch (mode) {
 	case USB_DR_MODE_UNKNOWN:
 	case USB_DR_MODE_HOST:
 	case USB_DR_MODE_OTG:
 		val |= U2P_R0_DM_PULLDOWN;
 		val |= U2P_R0_DP_PULLDOWN;
 		val &= ~U2P_R0_ID_PULLUP;
 		break;

 	case USB_DR_MODE_PERIPHERAL:
 		val &= ~U2P_R0_DM_PULLDOWN;
 		val &= ~U2P_R0_DP_PULLDOWN;
 		val |= U2P_R0_ID_PULLUP;
 		break;
 	}

 	regmap_write(priv->regmap, U2P_R0, val);

 	phy_meson_gxl_usb2_reset(priv);
 }

 static int phy_meson_gxl_usb2_power_on(struct phy *phy)
 {
 	struct udevice *dev = phy->dev;
 	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
 	uint val;

 	regmap_read(priv->regmap, U2P_R0, &val);
 	/* power on the PHY by taking it out of reset mode */
 	val &= ~U2P_R0_POWER_ON_RESET;
 	regmap_write(priv->regmap, U2P_R0, val);

 	phy_meson_gxl_usb2_set_mode(phy, USB_DR_MODE_HOST);

 	return 0;
 }

 static int phy_meson_gxl_usb2_power_off(struct phy *phy)
 {
 	struct udevice *dev = phy->dev;
 	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
 	uint val;

 	regmap_read(priv->regmap, U2P_R0, &val);
 	/* power off the PHY by putting it into reset mode */
 	val |= U2P_R0_POWER_ON_RESET;
 	regmap_write(priv->regmap, U2P_R0, val);

 	return 0;
 }

 struct phy_ops meson_gxl_usb2_phy_ops = {
 	.power_on = phy_meson_gxl_usb2_power_on,
 	.power_off = phy_meson_gxl_usb2_power_off,
 };

 int meson_gxl_usb2_phy_probe(struct udevice *dev)
 {
 	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
 	int ret;

 	ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
 	if (ret)
 		return ret;

 #if CONFIG_IS_ENABLED(CLK)
 	ret = clk_get_by_index(dev, 0, &priv->clk);
 	if (ret < 0)
 		return ret;

 	ret = clk_enable(&priv->clk);
 	if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
 		pr_err("failed to enable PHY clock\n");
 		return ret;
 	}
 #endif

 	return 0;
 }

 static const struct udevice_id meson_gxl_usb2_phy_ids[] = {
 	{ .compatible = "amlogic,meson-gxl-usb2-phy" },
 	{ }
 };

 U_BOOT_DRIVER(meson_gxl_usb2_phy) = {
 	.name = "meson_gxl_usb2_phy",
 	.id = UCLASS_PHY,
 	.of_match = meson_gxl_usb2_phy_ids,
 	.probe = meson_gxl_usb2_phy_probe,
 	.ops = &meson_gxl_usb2_phy_ops,
 	.priv_auto	= sizeof(struct phy_meson_gxl_usb2_priv),
 };
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Meson GXL and GXM USB2 PHY driver
	*
	* Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
	* Copyright (C) 2018 BayLibre, SAS
	* Author: Neil Armstrong <narmstron@baylibre.com>
	*/

	#include <malloc.h>
	#include <asm/io.h>
	#include <bitfield.h>
	#include <clk.h>
	#include <dm.h>
	#include <errno.h>
	#include <generic-phy.h>
	#include <regmap.h>
	#include <linux/delay.h>
	#include <linux/printk.h>
	#include <linux/usb/otg.h>

	#include <asm/arch/usb-gx.h>

	#include <linux/bitops.h>
	#include <linux/compat.h>

	/* bits [31:27] are read-only */
	#define U2P_R0 0x0
	#define U2P_R0_BYPASS_SEL BIT(0)
	#define U2P_R0_BYPASS_DM_EN BIT(1)
	#define U2P_R0_BYPASS_DP_EN BIT(2)
	#define U2P_R0_TXBITSTUFF_ENH BIT(3)
	#define U2P_R0_TXBITSTUFF_EN BIT(4)
	#define U2P_R0_DM_PULLDOWN BIT(5)
	#define U2P_R0_DP_PULLDOWN BIT(6)
	#define U2P_R0_DP_VBUS_VLD_EXT_SEL BIT(7)
	#define U2P_R0_DP_VBUS_VLD_EXT BIT(8)
	#define U2P_R0_ADP_PRB_EN BIT(9)
	#define U2P_R0_ADP_DISCHARGE BIT(10)
	#define U2P_R0_ADP_CHARGE BIT(11)
	#define U2P_R0_DRV_VBUS BIT(12)
	#define U2P_R0_ID_PULLUP BIT(13)
	#define U2P_R0_LOOPBACK_EN_B BIT(14)
	#define U2P_R0_OTG_DISABLE BIT(15)
	#define U2P_R0_COMMON_ONN BIT(16)
	#define U2P_R0_FSEL_MASK GENMASK(19, 17)
	#define U2P_R0_REF_CLK_SEL_MASK GENMASK(21, 20)
	#define U2P_R0_POWER_ON_RESET BIT(22)
	#define U2P_R0_V_ATE_TEST_EN_B_MASK GENMASK(24, 23)
	#define U2P_R0_ID_SET_ID_DQ BIT(25)
	#define U2P_R0_ATE_RESET BIT(26)
	#define U2P_R0_FSV_MINUS BIT(27)
	#define U2P_R0_FSV_PLUS BIT(28)
	#define U2P_R0_BYPASS_DM_DATA BIT(29)
	#define U2P_R0_BYPASS_DP_DATA BIT(30)

	#define U2P_R1 0x4
	#define U2P_R1_BURN_IN_TEST BIT(0)
	#define U2P_R1_ACA_ENABLE BIT(1)
	#define U2P_R1_DCD_ENABLE BIT(2)
	#define U2P_R1_VDAT_SRC_EN_B BIT(3)
	#define U2P_R1_VDAT_DET_EN_B BIT(4)
	#define U2P_R1_CHARGES_SEL BIT(5)
	#define U2P_R1_TX_PREEMP_PULSE_TUNE BIT(6)
	#define U2P_R1_TX_PREEMP_AMP_TUNE_MASK GENMASK(8, 7)
	#define U2P_R1_TX_RES_TUNE_MASK GENMASK(10, 9)
	#define U2P_R1_TX_RISE_TUNE_MASK GENMASK(12, 11)
	#define U2P_R1_TX_VREF_TUNE_MASK GENMASK(16, 13)
	#define U2P_R1_TX_FSLS_TUNE_MASK GENMASK(20, 17)
	#define U2P_R1_TX_HSXV_TUNE_MASK GENMASK(22, 21)
	#define U2P_R1_OTG_TUNE_MASK GENMASK(25, 23)
	#define U2P_R1_SQRX_TUNE_MASK GENMASK(28, 26)
	#define U2P_R1_COMP_DIS_TUNE_MASK GENMASK(31, 29)

	/* bits [31:14] are read-only */
	#define U2P_R2 0x8
	#define U2P_R2_TESTDATA_IN_MASK GENMASK(7, 0)
	#define U2P_R2_TESTADDR_MASK GENMASK(11, 8)
	#define U2P_R2_TESTDATA_OUT_SEL BIT(12)
	#define U2P_R2_TESTCLK BIT(13)
	#define U2P_R2_TESTDATA_OUT_MASK GENMASK(17, 14)
	#define U2P_R2_ACA_PIN_RANGE_C BIT(18)
	#define U2P_R2_ACA_PIN_RANGE_B BIT(19)
	#define U2P_R2_ACA_PIN_RANGE_A BIT(20)
	#define U2P_R2_ACA_PIN_GND BIT(21)
	#define U2P_R2_ACA_PIN_FLOAT BIT(22)
	#define U2P_R2_CHARGE_DETECT BIT(23)
	#define U2P_R2_DEVICE_SESSION_VALID BIT(24)
	#define U2P_R2_ADP_PROBE BIT(25)
	#define U2P_R2_ADP_SENSE BIT(26)
	#define U2P_R2_SESSION_END BIT(27)
	#define U2P_R2_VBUS_VALID BIT(28)
	#define U2P_R2_B_VALID BIT(29)
	#define U2P_R2_A_VALID BIT(30)
	#define U2P_R2_ID_DIG BIT(31)

	#define U2P_R3 0xc

	#define RESET_COMPLETE_TIME 500

	struct phy_meson_gxl_usb2_priv {
	struct regmap *regmap;
	#if CONFIG_IS_ENABLED(CLK)
	struct clk clk;
	#endif
	};

	static void phy_meson_gxl_usb2_reset(struct phy_meson_gxl_usb2_priv *priv)
	{
	uint val;

	regmap_read(priv->regmap, U2P_R0, &val);

	/* reset the PHY and wait until settings are stabilized */
	val \|= U2P_R0_POWER_ON_RESET;
	regmap_write(priv->regmap, U2P_R0, val);
	udelay(RESET_COMPLETE_TIME);

	val &= ~U2P_R0_POWER_ON_RESET;
	regmap_write(priv->regmap, U2P_R0, val);
	udelay(RESET_COMPLETE_TIME);
	}

	void phy_meson_gxl_usb2_set_mode(struct phy *phy, enum usb_dr_mode mode)
	{
	struct udevice *dev = phy->dev;
	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
	uint val;

	regmap_read(priv->regmap, U2P_R0, &val);

	switch (mode) {
	case USB_DR_MODE_UNKNOWN:
	case USB_DR_MODE_HOST:
	case USB_DR_MODE_OTG:
	val \|= U2P_R0_DM_PULLDOWN;
	val \|= U2P_R0_DP_PULLDOWN;
	val &= ~U2P_R0_ID_PULLUP;
	break;

	case USB_DR_MODE_PERIPHERAL:
	val &= ~U2P_R0_DM_PULLDOWN;
	val &= ~U2P_R0_DP_PULLDOWN;
	val \|= U2P_R0_ID_PULLUP;
	break;
	}

	regmap_write(priv->regmap, U2P_R0, val);

	phy_meson_gxl_usb2_reset(priv);
	}

	static int phy_meson_gxl_usb2_power_on(struct phy *phy)
	{
	struct udevice *dev = phy->dev;
	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
	uint val;

	regmap_read(priv->regmap, U2P_R0, &val);
	/* power on the PHY by taking it out of reset mode */
	val &= ~U2P_R0_POWER_ON_RESET;
	regmap_write(priv->regmap, U2P_R0, val);

	phy_meson_gxl_usb2_set_mode(phy, USB_DR_MODE_HOST);

	return 0;
	}

	static int phy_meson_gxl_usb2_power_off(struct phy *phy)
	{
	struct udevice *dev = phy->dev;
	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
	uint val;

	regmap_read(priv->regmap, U2P_R0, &val);
	/* power off the PHY by putting it into reset mode */
	val \|= U2P_R0_POWER_ON_RESET;
	regmap_write(priv->regmap, U2P_R0, val);

	return 0;
	}

	struct phy_ops meson_gxl_usb2_phy_ops = {
	.power_on = phy_meson_gxl_usb2_power_on,
	.power_off = phy_meson_gxl_usb2_power_off,
	};

	int meson_gxl_usb2_phy_probe(struct udevice *dev)
	{
	struct phy_meson_gxl_usb2_priv *priv = dev_get_priv(dev);
	int ret;

	ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
	if (ret)
	return ret;

	#if CONFIG_IS_ENABLED(CLK)
	ret = clk_get_by_index(dev, 0, &priv->clk);
	if (ret < 0)
	return ret;

	ret = clk_enable(&priv->clk);
	if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
	pr_err("failed to enable PHY clock\n");
	return ret;
	}
	#endif

	return 0;
	}

	static const struct udevice_id meson_gxl_usb2_phy_ids[] = {
	{ .compatible = "amlogic,meson-gxl-usb2-phy" },
	{ }
	};

	U_BOOT_DRIVER(meson_gxl_usb2_phy) = {
	.name = "meson_gxl_usb2_phy",
	.id = UCLASS_PHY,
	.of_match = meson_gxl_usb2_phy_ids,
	.probe = meson_gxl_usb2_phy_probe,
	.ops = &meson_gxl_usb2_phy_ops,
	.priv_auto = sizeof(struct phy_meson_gxl_usb2_priv),
	};