include/configs/vexpress_aemv8.h - filogic/uboot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Configuration for Versatile Express. Parts were derived from other ARM
  *   configurations.
  */

 #ifndef __VEXPRESS_AEMV8_H
 #define __VEXPRESS_AEMV8_H

 #include <linux/stringify.h>

 /* Link Definitions */
 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
 #else
 /* ATF loads u-boot here for BASE_FVP model */
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
 #endif

 #define CONFIG_SYS_BOOTM_LEN (64 << 20)      /* Increase max gunzip size */

 /* CS register bases for the original memory map. */
 #ifdef CONFIG_TARGET_VEXPRESS64_BASER_FVP
 #define V2M_DRAM_BASE			0x00000000
 #define V2M_PA_BASE			0x80000000
 #else
 #define V2M_DRAM_BASE			0x80000000
 #define V2M_PA_BASE			0x00000000
 #endif

 #define V2M_PA_CS0			(V2M_PA_BASE + 0x00000000)
 #define V2M_PA_CS1			(V2M_PA_BASE + 0x14000000)
 #define V2M_PA_CS2			(V2M_PA_BASE + 0x18000000)
 #define V2M_PA_CS3			(V2M_PA_BASE + 0x1c000000)
 #define V2M_PA_CS4			(V2M_PA_BASE + 0x0c000000)
 #define V2M_PA_CS5			(V2M_PA_BASE + 0x10000000)

 #define V2M_PERIPH_OFFSET(x)		(x << 16)
 #define V2M_SYSREGS			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
 #define V2M_SYSCTL			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
 #define V2M_SERIAL_BUS_PCI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))

 /* Common peripherals relative to CS7. */
 #define V2M_AACI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
 #define V2M_MMCI			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
 #define V2M_KMI0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
 #define V2M_KMI1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))

 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 #define V2M_UART0			0x7ff80000
 #define V2M_UART1			0x7ff70000
 #else /* Not Juno */
 #define V2M_UART0			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
 #define V2M_UART1			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
 #define V2M_UART2			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
 #define V2M_UART3			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
 #endif

 #define V2M_WDT				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))

 #define V2M_TIMER01			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
 #define V2M_TIMER23			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))

 #define V2M_SERIAL_BUS_DVI		(V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
 #define V2M_RTC				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))

 #define V2M_CF				(V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))

 #define V2M_CLCD			(V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))

 /* System register offsets. */
 #define V2M_SYS_CFGDATA			(V2M_SYSREGS + 0x0a0)
 #define V2M_SYS_CFGCTRL			(V2M_SYSREGS + 0x0a4)
 #define V2M_SYS_CFGSTAT			(V2M_SYSREGS + 0x0a8)

 /* Generic Interrupt Controller Definitions */
 #ifdef CONFIG_GICV3
 #define GICD_BASE			(V2M_PA_BASE + 0x2f000000)
 #define GICR_BASE			(V2M_PA_BASE + 0x2f100000)
 #else

 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 #define GICD_BASE			(0x2C010000)
 #define GICC_BASE			(0x2C02f000)
 #else
 #define GICD_BASE			(V2M_PA_BASE + 0x2f000000)
 #define GICC_BASE			(V2M_PA_BASE + 0x2c000000)
 #endif
 #endif /* !CONFIG_GICV3 */

 #if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && !defined(CONFIG_DM_ETH)
 /* The Vexpress64 BASE_FVP simulator uses SMSC91C111 */
 #define CONFIG_SMC91111			1
 #define CONFIG_SMC91111_BASE		(V2M_PA_BASE + 0x01A000000)
 #endif

 /* PL011 Serial Configuration */
 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 #define CONFIG_PL011_CLOCK		7372800
 #else
 #define CONFIG_PL011_CLOCK		24000000
 #endif

 /* Physical Memory Map */
 #define PHYS_SDRAM_1			(V2M_DRAM_BASE)	/* SDRAM Bank #1 */
 /* Top 16MB reserved for secure world use */
 #define DRAM_SEC_SIZE		0x01000000
 #define PHYS_SDRAM_1_SIZE	0x80000000 - DRAM_SEC_SIZE
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1

 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 #define PHYS_SDRAM_2			(0x880000000)
 #define PHYS_SDRAM_2_SIZE		0x180000000
 #elif CONFIG_NR_DRAM_BANKS == 2
 #define PHYS_SDRAM_2			(0x880000000)
 #define PHYS_SDRAM_2_SIZE		0x80000000
 #endif

 /* Copy the kernel, initrd and FDT from NOR flash to DRAM memory and boot. */
 #define BOOTENV_DEV_AFS(devtypeu, devtypel, instance) \
 	"bootcmd_afs="							\
 		"afs load ${kernel_name} ${kernel_addr_r} ;"\
 		"if test $? -eq 1; then "\
 		"  echo Loading ${kernel_alt_name} instead of ${kernel_name}; "\
 		"  afs load ${kernel_alt_name} ${kernel_addr_r};"\
 		"fi ; "\
 		"afs load ${fdtfile} ${fdt_addr_r} ;"\
 		"if test $? -eq 1; then "\
 		"  echo Loading ${fdt_alt_name} instead of ${fdtfile}; "\
 		"  afs load ${fdt_alt_name} ${fdt_addr_r}; "\
 		"fi ; "\
 		"fdt addr ${fdt_addr_r}; fdt resize; " \
 		"if afs load  ${ramdisk_name} ${ramdisk_addr_r} ; "\
 		"then "\
 		"  setenv ramdisk_param ${ramdisk_addr_r}; "\
 		"else "\
 		"  setenv ramdisk_param -; "\
 		"fi ; " \
 		"booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}\0"
 #define BOOTENV_DEV_NAME_AFS(devtypeu, devtypel, instance) "afs "

 /* Boot by executing a U-Boot script pre-loaded into DRAM. */
 #define BOOTENV_DEV_MEM(devtypeu, devtypel, instance) \
 	"bootcmd_mem= " \
 		"source ${scriptaddr}; " \
 		"if test $? -eq 1; then " \
 		"  env import -t ${scriptaddr}; " \
 		"  if test -n $uenvcmd; then " \
 		"    echo Running uenvcmd ...; " \
 		"    run uenvcmd; " \
 		"  fi; " \
 		"fi\0"
 #define BOOTENV_DEV_NAME_MEM(devtypeu, devtypel, instance) "mem "

 #ifdef CONFIG_CMD_VIRTIO
 #define FUNC_VIRTIO(func)	func(VIRTIO, virtio, 0)
 #else
 #define FUNC_VIRTIO(func)
 #endif

 /*
  * Boot by loading an Android image, or kernel, initrd and FDT through
  * semihosting into DRAM.
  */
 #define BOOTENV_DEV_SMH(devtypeu, devtypel, instance) \
 	"bootcmd_smh= " 						\
 		"if load hostfs - ${boot_addr_r} ${boot_name}; then"		\
 		"  setenv bootargs;"					\
 		"  abootimg addr ${boot_addr_r};"			\
 		"  abootimg get dtb --index=0 fdt_addr_r;"		\
 		"  bootm ${boot_addr_r} ${boot_addr_r} ${fdt_addr_r};"	\
 		"else"							\
 		"  if load hostfs - ${kernel_addr_r} ${kernel_name}; then"	\
 		"    setenv fdt_high 0xffffffffffffffff;"		\
 		"    setenv initrd_high 0xffffffffffffffff;"		\
 		"    load hostfs - ${fdt_addr_r} ${fdtfile};"			\
 		"    load hostfs - ${ramdisk_addr_r} ${ramdisk_name};" \
 		"    fdt addr ${fdt_addr_r};"				\
 		"    fdt resize;"					\
 		"    fdt chosen ${ramdisk_addr_r} ${filesize};"	\
 		"    booti $kernel_addr_r - $fdt_addr_r;"		\
 		"  fi;"							\
 		"fi\0"
 #define BOOTENV_DEV_NAME_SMH(devtypeu, devtypel, instance) "smh "

 /* Boot sources for distro boot and load addresses, per board */

 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO			/* Arm Juno board */

 #define BOOT_TARGET_DEVICES(func)	\
 	func(USB, usb, 0)		\
 	func(SATA, sata, 0)		\
 	func(SATA, sata, 1)		\
 	func(PXE, pxe, na)		\
 	func(DHCP, dhcp, na)		\
 	func(AFS, afs, na)

 #define VEXPRESS_KERNEL_ADDR		0x80080000
 #define VEXPRESS_PXEFILE_ADDR		0x8fb00000
 #define VEXPRESS_FDT_ADDR		0x8fc00000
 #define VEXPRESS_SCRIPT_ADDR		0x8fd00000
 #define VEXPRESS_RAMDISK_ADDR		0x8fe00000

 #define EXTRA_ENV_NAMES							\
 		"kernel_name=norkern\0"					\
 		"kernel_alt_name=Image\0"				\
 		"ramdisk_name=ramdisk.img\0"				\
 		"fdtfile=board.dtb\0"					\
 		"fdt_alt_name=juno\0"

 #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP			/* ARMv8-A base model */

 #define BOOT_TARGET_DEVICES(func)	\
 	func(SMH, smh, na)		\
 	func(MEM, mem, na)		\
 	FUNC_VIRTIO(func)		\
 	func(PXE, pxe, na)		\
 	func(DHCP, dhcp, na)

 #define VEXPRESS_KERNEL_ADDR		0x80080000
 #define VEXPRESS_PXEFILE_ADDR		0x8fa00000
 #define VEXPRESS_SCRIPT_ADDR		0x8fb00000
 #define VEXPRESS_FDT_ADDR		0x8fc00000
 #define VEXPRESS_BOOT_ADDR		0x8fd00000
 #define VEXPRESS_RAMDISK_ADDR		0x8fe00000

 #define EXTRA_ENV_NAMES							\
 		"kernel_name=Image\0"					\
 		"ramdisk_name=ramdisk.img\0"				\
 		"fdtfile=devtree.dtb\0"					\
 		"boot_name=boot.img\0"					\
 		"boot_addr_r=" __stringify(VEXPRESS_BOOT_ADDR) "\0"

 #elif CONFIG_TARGET_VEXPRESS64_BASER_FVP		/* ARMv8-R base model */

 #define BOOT_TARGET_DEVICES(func)	\
 	func(MEM, mem, na)		\
 	FUNC_VIRTIO(func)		\
 	func(PXE, pxe, na)		\
 	func(DHCP, dhcp, na)

 #define VEXPRESS_KERNEL_ADDR		0x00200000
 #define VEXPRESS_PXEFILE_ADDR		0x0fb00000
 #define VEXPRESS_FDT_ADDR		0x0fc00000
 #define VEXPRESS_SCRIPT_ADDR		0x0fd00000
 #define VEXPRESS_RAMDISK_ADDR		0x0fe00000

 #define EXTRA_ENV_NAMES							\
 					"kernel_name=Image\0"		\
 					"ramdisk_name=ramdisk.img\0"	\
 					"fdtfile=board.dtb\0"
 #endif

 #include <config_distro_bootcmd.h>

 /* Default load addresses and names for the different payloads. */
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 		"kernel_addr_r=" __stringify(VEXPRESS_KERNEL_ADDR) "\0"	       \
 		"ramdisk_addr_r=" __stringify(VEXPRESS_RAMDISK_ADDR) "\0"      \
 		"pxefile_addr_r=" __stringify(VEXPRESS_PXEFILE_ADDR) "\0"      \
 		"fdt_addr_r=" __stringify(VEXPRESS_FDT_ADDR) "\0"	       \
 		"scriptaddr=" __stringify(VEXPRESS_SCRIPT_ADDR) "\0"	       \
 		EXTRA_ENV_NAMES						       \
 		BOOTENV

 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 #define CONFIG_SYS_MAXARGS		64	/* max command args */

 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 #define CONFIG_SYS_FLASH_BASE		0x08000000
 /* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
 #define CONFIG_SYS_MAX_FLASH_SECT	259
 /* Store environment at top of flash in the same location as blank.img */
 /* in the Juno firmware. */
 #else
 #define CONFIG_SYS_FLASH_BASE		(V2M_PA_BASE + 0x0C000000)
 /* 256 x 256KiB sectors */
 #define CONFIG_SYS_MAX_FLASH_SECT	256
 /* Store environment at top of flash */
 #endif

 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_32BIT

 #ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 #endif

 #define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
 #define FLASH_MAX_SECTOR_SIZE		0x00040000

 #endif /* __VEXPRESS_AEMV8_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Configuration for Versatile Express. Parts were derived from other ARM
	* configurations.
	*/

	#ifndef __VEXPRESS_AEMV8_H
	#define __VEXPRESS_AEMV8_H

	#include <linux/stringify.h>

	/* Link Definitions */
	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
	#else
	/* ATF loads u-boot here for BASE_FVP model */
	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
	#endif

	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */

	/* CS register bases for the original memory map. */
	#ifdef CONFIG_TARGET_VEXPRESS64_BASER_FVP
	#define V2M_DRAM_BASE 0x00000000
	#define V2M_PA_BASE 0x80000000
	#else
	#define V2M_DRAM_BASE 0x80000000
	#define V2M_PA_BASE 0x00000000
	#endif

	#define V2M_PA_CS0 (V2M_PA_BASE + 0x00000000)
	#define V2M_PA_CS1 (V2M_PA_BASE + 0x14000000)
	#define V2M_PA_CS2 (V2M_PA_BASE + 0x18000000)
	#define V2M_PA_CS3 (V2M_PA_BASE + 0x1c000000)
	#define V2M_PA_CS4 (V2M_PA_BASE + 0x0c000000)
	#define V2M_PA_CS5 (V2M_PA_BASE + 0x10000000)

	#define V2M_PERIPH_OFFSET(x) (x << 16)
	#define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
	#define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
	#define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))

	/* Common peripherals relative to CS7. */
	#define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
	#define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
	#define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
	#define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))

	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	#define V2M_UART0 0x7ff80000
	#define V2M_UART1 0x7ff70000
	#else /* Not Juno */
	#define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
	#define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
	#define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
	#define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
	#endif

	#define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))

	#define V2M_TIMER01 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
	#define V2M_TIMER23 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))

	#define V2M_SERIAL_BUS_DVI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
	#define V2M_RTC (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))

	#define V2M_CF (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))

	#define V2M_CLCD (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))

	/* System register offsets. */
	#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
	#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
	#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)

	/* Generic Interrupt Controller Definitions */
	#ifdef CONFIG_GICV3
	#define GICD_BASE (V2M_PA_BASE + 0x2f000000)
	#define GICR_BASE (V2M_PA_BASE + 0x2f100000)
	#else

	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	#define GICD_BASE (0x2C010000)
	#define GICC_BASE (0x2C02f000)
	#else
	#define GICD_BASE (V2M_PA_BASE + 0x2f000000)
	#define GICC_BASE (V2M_PA_BASE + 0x2c000000)
	#endif
	#endif /* !CONFIG_GICV3 */

	#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && !defined(CONFIG_DM_ETH)
	/* The Vexpress64 BASE_FVP simulator uses SMSC91C111 */
	#define CONFIG_SMC91111 1
	#define CONFIG_SMC91111_BASE (V2M_PA_BASE + 0x01A000000)
	#endif

	/* PL011 Serial Configuration */
	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	#define CONFIG_PL011_CLOCK 7372800
	#else
	#define CONFIG_PL011_CLOCK 24000000
	#endif

	/* Physical Memory Map */
	#define PHYS_SDRAM_1 (V2M_DRAM_BASE) /* SDRAM Bank #1 */
	/* Top 16MB reserved for secure world use */
	#define DRAM_SEC_SIZE 0x01000000
	#define PHYS_SDRAM_1_SIZE 0x80000000 - DRAM_SEC_SIZE
	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1

	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	#define PHYS_SDRAM_2 (0x880000000)
	#define PHYS_SDRAM_2_SIZE 0x180000000
	#elif CONFIG_NR_DRAM_BANKS == 2
	#define PHYS_SDRAM_2 (0x880000000)
	#define PHYS_SDRAM_2_SIZE 0x80000000
	#endif

	/* Copy the kernel, initrd and FDT from NOR flash to DRAM memory and boot. */
	#define BOOTENV_DEV_AFS(devtypeu, devtypel, instance) \
	"bootcmd_afs=" \
	"afs load ${kernel_name} ${kernel_addr_r} ;"\
	"if test $? -eq 1; then "\
	" echo Loading ${kernel_alt_name} instead of ${kernel_name}; "\
	" afs load ${kernel_alt_name} ${kernel_addr_r};"\
	"fi ; "\
	"afs load ${fdtfile} ${fdt_addr_r} ;"\
	"if test $? -eq 1; then "\
	" echo Loading ${fdt_alt_name} instead of ${fdtfile}; "\
	" afs load ${fdt_alt_name} ${fdt_addr_r}; "\
	"fi ; "\
	"fdt addr ${fdt_addr_r}; fdt resize; " \
	"if afs load ${ramdisk_name} ${ramdisk_addr_r} ; "\
	"then "\
	" setenv ramdisk_param ${ramdisk_addr_r}; "\
	"else "\
	" setenv ramdisk_param -; "\
	"fi ; " \
	"booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}\0"
	#define BOOTENV_DEV_NAME_AFS(devtypeu, devtypel, instance) "afs "

	/* Boot by executing a U-Boot script pre-loaded into DRAM. */
	#define BOOTENV_DEV_MEM(devtypeu, devtypel, instance) \
	"bootcmd_mem= " \
	"source ${scriptaddr}; " \
	"if test $? -eq 1; then " \
	" env import -t ${scriptaddr}; " \
	" if test -n $uenvcmd; then " \
	" echo Running uenvcmd ...; " \
	" run uenvcmd; " \
	" fi; " \
	"fi\0"
	#define BOOTENV_DEV_NAME_MEM(devtypeu, devtypel, instance) "mem "

	#ifdef CONFIG_CMD_VIRTIO
	#define FUNC_VIRTIO(func) func(VIRTIO, virtio, 0)
	#else
	#define FUNC_VIRTIO(func)
	#endif

	/*
	* Boot by loading an Android image, or kernel, initrd and FDT through
	* semihosting into DRAM.
	*/
	#define BOOTENV_DEV_SMH(devtypeu, devtypel, instance) \
	"bootcmd_smh= " \
	"if load hostfs - ${boot_addr_r} ${boot_name}; then" \
	" setenv bootargs;" \
	" abootimg addr ${boot_addr_r};" \
	" abootimg get dtb --index=0 fdt_addr_r;" \
	" bootm ${boot_addr_r} ${boot_addr_r} ${fdt_addr_r};" \
	"else" \
	" if load hostfs - ${kernel_addr_r} ${kernel_name}; then" \
	" setenv fdt_high 0xffffffffffffffff;" \
	" setenv initrd_high 0xffffffffffffffff;" \
	" load hostfs - ${fdt_addr_r} ${fdtfile};" \
	" load hostfs - ${ramdisk_addr_r} ${ramdisk_name};" \
	" fdt addr ${fdt_addr_r};" \
	" fdt resize;" \
	" fdt chosen ${ramdisk_addr_r} ${filesize};" \
	" booti $kernel_addr_r - $fdt_addr_r;" \
	" fi;" \
	"fi\0"
	#define BOOTENV_DEV_NAME_SMH(devtypeu, devtypel, instance) "smh "

	/* Boot sources for distro boot and load addresses, per board */

	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO /* Arm Juno board */

	#define BOOT_TARGET_DEVICES(func) \
	func(USB, usb, 0) \
	func(SATA, sata, 0) \
	func(SATA, sata, 1) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na) \
	func(AFS, afs, na)

	#define VEXPRESS_KERNEL_ADDR 0x80080000
	#define VEXPRESS_PXEFILE_ADDR 0x8fb00000
	#define VEXPRESS_FDT_ADDR 0x8fc00000
	#define VEXPRESS_SCRIPT_ADDR 0x8fd00000
	#define VEXPRESS_RAMDISK_ADDR 0x8fe00000

	#define EXTRA_ENV_NAMES \
	"kernel_name=norkern\0" \
	"kernel_alt_name=Image\0" \
	"ramdisk_name=ramdisk.img\0" \
	"fdtfile=board.dtb\0" \
	"fdt_alt_name=juno\0"

	#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP /* ARMv8-A base model */

	#define BOOT_TARGET_DEVICES(func) \
	func(SMH, smh, na) \
	func(MEM, mem, na) \
	FUNC_VIRTIO(func) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

	#define VEXPRESS_KERNEL_ADDR 0x80080000
	#define VEXPRESS_PXEFILE_ADDR 0x8fa00000
	#define VEXPRESS_SCRIPT_ADDR 0x8fb00000
	#define VEXPRESS_FDT_ADDR 0x8fc00000
	#define VEXPRESS_BOOT_ADDR 0x8fd00000
	#define VEXPRESS_RAMDISK_ADDR 0x8fe00000

	#define EXTRA_ENV_NAMES \
	"kernel_name=Image\0" \
	"ramdisk_name=ramdisk.img\0" \
	"fdtfile=devtree.dtb\0" \
	"boot_name=boot.img\0" \
	"boot_addr_r=" __stringify(VEXPRESS_BOOT_ADDR) "\0"

	#elif CONFIG_TARGET_VEXPRESS64_BASER_FVP /* ARMv8-R base model */

	#define BOOT_TARGET_DEVICES(func) \
	func(MEM, mem, na) \
	FUNC_VIRTIO(func) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

	#define VEXPRESS_KERNEL_ADDR 0x00200000
	#define VEXPRESS_PXEFILE_ADDR 0x0fb00000
	#define VEXPRESS_FDT_ADDR 0x0fc00000
	#define VEXPRESS_SCRIPT_ADDR 0x0fd00000
	#define VEXPRESS_RAMDISK_ADDR 0x0fe00000

	#define EXTRA_ENV_NAMES \
	"kernel_name=Image\0" \
	"ramdisk_name=ramdisk.img\0" \
	"fdtfile=board.dtb\0"
	#endif

	#include <config_distro_bootcmd.h>

	/* Default load addresses and names for the different payloads. */
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_addr_r=" __stringify(VEXPRESS_KERNEL_ADDR) "\0" \
	"ramdisk_addr_r=" __stringify(VEXPRESS_RAMDISK_ADDR) "\0" \
	"pxefile_addr_r=" __stringify(VEXPRESS_PXEFILE_ADDR) "\0" \
	"fdt_addr_r=" __stringify(VEXPRESS_FDT_ADDR) "\0" \
	"scriptaddr=" __stringify(VEXPRESS_SCRIPT_ADDR) "\0" \
	EXTRA_ENV_NAMES \
	BOOTENV

	/* Monitor Command Prompt */
	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	#define CONFIG_SYS_MAXARGS 64 /* max command args */

	#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
	#define CONFIG_SYS_FLASH_BASE 0x08000000
	/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
	#define CONFIG_SYS_MAX_FLASH_SECT 259
	/* Store environment at top of flash in the same location as blank.img */
	/* in the Juno firmware. */
	#else
	#define CONFIG_SYS_FLASH_BASE (V2M_PA_BASE + 0x0C000000)
	/* 256 x 256KiB sectors */
	#define CONFIG_SYS_MAX_FLASH_SECT 256
	/* Store environment at top of flash */
	#endif

	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT

	#ifdef CONFIG_USB_EHCI_HCD
	#define CONFIG_USB_OHCI_NEW
	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
	#endif

	#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
	#define FLASH_MAX_SECTOR_SIZE 0x00040000

	#endif /* __VEXPRESS_AEMV8_H */