| /* |
| * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <asm/io.h> |
| #include <asm/arch/gxbb.h> |
| #include <asm/arch/sm.h> |
| #include <phy.h> |
| |
| #define EFUSE_SN_OFFSET 20 |
| #define EFUSE_SN_SIZE 16 |
| #define EFUSE_MAC_OFFSET 52 |
| #define EFUSE_MAC_SIZE 6 |
| |
| int board_init(void) |
| { |
| return 0; |
| } |
| |
| int misc_init_r(void) |
| { |
| u8 mac_addr[EFUSE_MAC_SIZE]; |
| ssize_t len; |
| |
| /* Set RGMII mode */ |
| setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF | |
| GXBB_ETH_REG_0_TX_PHASE(1) | |
| GXBB_ETH_REG_0_TX_RATIO(4) | |
| GXBB_ETH_REG_0_PHY_CLK_EN | |
| GXBB_ETH_REG_0_CLK_EN); |
| |
| /* Enable power and clock gate */ |
| setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH); |
| clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK); |
| |
| /* Reset PHY on GPIOZ_14 */ |
| clrbits_le32(GXBB_GPIO_EN(3), BIT(14)); |
| clrbits_le32(GXBB_GPIO_OUT(3), BIT(14)); |
| mdelay(10); |
| setbits_le32(GXBB_GPIO_OUT(3), BIT(14)); |
| |
| if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { |
| len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, |
| mac_addr, EFUSE_MAC_SIZE); |
| if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) |
| eth_setenv_enetaddr("ethaddr", mac_addr); |
| } |
| |
| return 0; |
| } |