| /* |
| * |
| * Clock initialization for OMAP4 |
| * |
| * (C) Copyright 2010 |
| * Texas Instruments, <www.ti.com> |
| * |
| * Aneesh V <aneesh@ti.com> |
| * |
| * Based on previous work by: |
| * Santosh Shilimkar <santosh.shilimkar@ti.com> |
| * Rajendra Nayak <rnayak@ti.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| #include <common.h> |
| #include <asm/omap_common.h> |
| #include <asm/gpio.h> |
| #include <asm/arch/clocks.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/utils.h> |
| #include <asm/omap_gpio.h> |
| |
| #ifndef CONFIG_SPL_BUILD |
| /* |
| * printing to console doesn't work unless |
| * this code is executed from SPL |
| */ |
| #define printf(fmt, args...) |
| #define puts(s) |
| #endif |
| |
| struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100; |
| |
| const u32 sys_clk_array[8] = { |
| 12000000, /* 12 MHz */ |
| 13000000, /* 13 MHz */ |
| 16800000, /* 16.8 MHz */ |
| 19200000, /* 19.2 MHz */ |
| 26000000, /* 26 MHz */ |
| 27000000, /* 27 MHz */ |
| 38400000, /* 38.4 MHz */ |
| }; |
| |
| /* |
| * The M & N values in the following tables are created using the |
| * following tool: |
| * tools/omap/clocks_get_m_n.c |
| * Please use this tool for creating the table for any new frequency. |
| */ |
| |
| /* dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF */ |
| static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { |
| {175, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {700, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ |
| {125, 2, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {401, 10, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {350, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {700, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {638, 34, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ |
| }; |
| |
| /* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */ |
| static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { |
| {200, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {800, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ |
| {619, 12, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {125, 2, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {400, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {800, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {125, 5, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ |
| }; |
| |
| /* dpll locked at 1200 MHz - MPU clk at 600 MHz */ |
| static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { |
| {50, 0, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {600, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ |
| {250, 6, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {125, 3, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {300, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {200, 8, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {125, 7, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { |
| {200, 2, 1, 5, 8, 4, 6, 5}, /* 12 MHz */ |
| {800, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */ |
| {619, 12, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */ |
| {125, 2, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */ |
| {400, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */ |
| {800, 26, 1, 5, 8, 4, 6, 5}, /* 27 MHz */ |
| {125, 5, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = { |
| {127, 1, 1, 5, 8, 4, 6, 5}, /* 12 MHz */ |
| {762, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */ |
| {635, 13, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */ |
| {635, 15, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */ |
| {381, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */ |
| {254, 8, 1, 5, 8, 4, 6, 5}, /* 27 MHz */ |
| {496, 24, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params |
| core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = { |
| {200, 2, 2, 5, 8, 4, 6, 5}, /* 12 MHz */ |
| {800, 12, 2, 5, 8, 4, 6, 5}, /* 13 MHz */ |
| {619, 12, 2, 5, 8, 4, 6, 5}, /* 16.8 MHz */ |
| {125, 2, 2, 5, 8, 4, 6, 5}, /* 19.2 MHz */ |
| {400, 12, 2, 5, 8, 4, 6, 5}, /* 26 MHz */ |
| {800, 26, 2, 5, 8, 4, 6, 5}, /* 27 MHz */ |
| {125, 5, 2, 5, 8, 4, 6, 5} /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = { |
| {64, 0, 8, 6, 12, 9, 4, 5}, /* 12 MHz */ |
| {768, 12, 8, 6, 12, 9, 4, 5}, /* 13 MHz */ |
| {320, 6, 8, 6, 12, 9, 4, 5}, /* 16.8 MHz */ |
| {40, 0, 8, 6, 12, 9, 4, 5}, /* 19.2 MHz */ |
| {384, 12, 8, 6, 12, 9, 4, 5}, /* 26 MHz */ |
| {256, 8, 8, 6, 12, 9, 4, 5}, /* 27 MHz */ |
| {20, 0, 8, 6, 12, 9, 4, 5} /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = { |
| {931, 11, -1, -1, 4, 7, -1, -1}, /* 12 MHz */ |
| {931, 12, -1, -1, 4, 7, -1, -1}, /* 13 MHz */ |
| {665, 11, -1, -1, 4, 7, -1, -1}, /* 16.8 MHz */ |
| {727, 14, -1, -1, 4, 7, -1, -1}, /* 19.2 MHz */ |
| {931, 25, -1, -1, 4, 7, -1, -1}, /* 26 MHz */ |
| {931, 26, -1, -1, 4, 7, -1, -1}, /* 27 MHz */ |
| {291, 11, -1, -1, 4, 7, -1, -1} /* 38.4 MHz */ |
| }; |
| |
| /* ABE M & N values with sys_clk as source */ |
| static const struct dpll_params |
| abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { |
| {49, 5, 1, 1, -1, -1, -1, -1}, /* 12 MHz */ |
| {68, 8, 1, 1, -1, -1, -1, -1}, /* 13 MHz */ |
| {35, 5, 1, 1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {46, 8, 1, 1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {34, 8, 1, 1, -1, -1, -1, -1}, /* 26 MHz */ |
| {29, 7, 1, 1, -1, -1, -1, -1}, /* 27 MHz */ |
| {64, 24, 1, 1, -1, -1, -1, -1} /* 38.4 MHz */ |
| }; |
| |
| /* ABE M & N values with 32K clock as source */ |
| static const struct dpll_params abe_dpll_params_32k_196608khz = { |
| 750, 0, 1, 1, -1, -1, -1, -1 |
| }; |
| |
| static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { |
| {80, 0, 2, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {960, 12, 2, -1, -1, -1, -1, -1}, /* 13 MHz */ |
| {400, 6, 2, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {50, 0, 2, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {480, 12, 2, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {320, 8, 2, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {25, 0, 2, -1, -1, -1, -1, -1} /* 38.4 MHz */ |
| }; |
| |
| void setup_post_dividers(u32 *const base, const struct dpll_params *params) |
| { |
| struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; |
| |
| /* Setup post-dividers */ |
| if (params->m2 >= 0) |
| writel(params->m2, &dpll_regs->cm_div_m2_dpll); |
| if (params->m3 >= 0) |
| writel(params->m3, &dpll_regs->cm_div_m3_dpll); |
| if (params->m4 >= 0) |
| writel(params->m4, &dpll_regs->cm_div_m4_dpll); |
| if (params->m5 >= 0) |
| writel(params->m5, &dpll_regs->cm_div_m5_dpll); |
| if (params->m6 >= 0) |
| writel(params->m6, &dpll_regs->cm_div_m6_dpll); |
| if (params->m7 >= 0) |
| writel(params->m7, &dpll_regs->cm_div_m7_dpll); |
| } |
| |
| /* |
| * Lock MPU dpll |
| * |
| * Resulting MPU frequencies: |
| * 4430 ES1.0 : 600 MHz |
| * 4430 ES2.x : 792 MHz (OPP Turbo) |
| * 4460 : 920 MHz (OPP Turbo) - DCC disabled |
| */ |
| const struct dpll_params *get_mpu_dpll_params(void) |
| { |
| u32 omap_rev, sysclk_ind; |
| |
| omap_rev = omap_revision(); |
| sysclk_ind = get_sys_clk_index(); |
| |
| if (omap_rev == OMAP4430_ES1_0) |
| return &mpu_dpll_params_1200mhz[sysclk_ind]; |
| else if (omap_rev < OMAP4460_ES1_0) |
| return &mpu_dpll_params_1600mhz[sysclk_ind]; |
| else |
| return &mpu_dpll_params_1400mhz[sysclk_ind]; |
| } |
| |
| const struct dpll_params *get_core_dpll_params(void) |
| { |
| u32 sysclk_ind = get_sys_clk_index(); |
| |
| switch (omap_revision()) { |
| case OMAP4430_ES1_0: |
| return &core_dpll_params_es1_1524mhz[sysclk_ind]; |
| case OMAP4430_ES2_0: |
| case OMAP4430_SILICON_ID_INVALID: |
| /* safest */ |
| return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind]; |
| default: |
| return &core_dpll_params_1600mhz[sysclk_ind]; |
| } |
| } |
| |
| |
| const struct dpll_params *get_per_dpll_params(void) |
| { |
| u32 sysclk_ind = get_sys_clk_index(); |
| return &per_dpll_params_1536mhz[sysclk_ind]; |
| } |
| |
| const struct dpll_params *get_iva_dpll_params(void) |
| { |
| u32 sysclk_ind = get_sys_clk_index(); |
| return &iva_dpll_params_1862mhz[sysclk_ind]; |
| } |
| |
| const struct dpll_params *get_usb_dpll_params(void) |
| { |
| u32 sysclk_ind = get_sys_clk_index(); |
| return &usb_dpll_params_1920mhz[sysclk_ind]; |
| } |
| |
| const struct dpll_params *get_abe_dpll_params(void) |
| { |
| #ifdef CONFIG_SYS_OMAP_ABE_SYSCK |
| u32 sysclk_ind = get_sys_clk_index(); |
| return &abe_dpll_params_sysclk_196608khz[sysclk_ind]; |
| #else |
| return &abe_dpll_params_32k_196608khz; |
| #endif |
| } |
| |
| /* |
| * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva |
| * We set the maximum voltages allowed here because Smart-Reflex is not |
| * enabled in bootloader. Voltage initialization in the kernel will set |
| * these to the nominal values after enabling Smart-Reflex |
| */ |
| void scale_vcores(void) |
| { |
| u32 volt, omap_rev; |
| |
| omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); |
| |
| omap_rev = omap_revision(); |
| |
| /* |
| * Scale Voltage rails: |
| * 1. VDD_CORE |
| * 3. VDD_MPU |
| * 3. VDD_IVA |
| */ |
| if (omap_rev < OMAP4460_ES1_0) { |
| /* |
| * OMAP4430: |
| * VDD_CORE = TWL6030 VCORE3 |
| * VDD_MPU = TWL6030 VCORE1 |
| * VDD_IVA = TWL6030 VCORE2 |
| */ |
| volt = 1200; |
| do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt); |
| |
| /* |
| * note on VDD_MPU: |
| * Setting a high voltage for Nitro mode as smart reflex is not |
| * enabled. We use the maximum possible value in the AVS range |
| * because the next higher voltage in the discrete range |
| * (code >= 0b111010) is way too high. |
| */ |
| volt = 1325; |
| do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); |
| volt = 1200; |
| do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt); |
| |
| } else { |
| /* |
| * OMAP4460: |
| * VDD_CORE = TWL6030 VCORE1 |
| * VDD_MPU = TPS62361 |
| * VDD_IVA = TWL6030 VCORE2 |
| */ |
| volt = 1200; |
| do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); |
| /* TPS62361 */ |
| volt = 1203; |
| do_scale_tps62361(TPS62361_VSEL0_GPIO, |
| TPS62361_REG_ADDR_SET1, volt); |
| /* VCORE 2 - supplies vdd_iva */ |
| volt = 1200; |
| do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt); |
| } |
| } |
| |
| u32 get_offset_code(u32 offset) |
| { |
| u32 offset_code, step = 12660; /* 12.66 mV represented in uV */ |
| |
| if (omap_revision() == OMAP4430_ES1_0) |
| offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV; |
| else |
| offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV; |
| |
| offset_code = (offset + step - 1) / step; |
| |
| /* The code starts at 1 not 0 */ |
| return ++offset_code; |
| } |
| |
| /* |
| * Enable essential clock domains, modules and |
| * do some additional special settings needed |
| */ |
| void enable_basic_clocks(void) |
| { |
| u32 *const clk_domains_essential[] = { |
| &prcm->cm_l4per_clkstctrl, |
| &prcm->cm_l3init_clkstctrl, |
| &prcm->cm_memif_clkstctrl, |
| &prcm->cm_l4cfg_clkstctrl, |
| 0 |
| }; |
| |
| u32 *const clk_modules_hw_auto_essential[] = { |
| &prcm->cm_l3_2_gpmc_clkctrl, |
| &prcm->cm_memif_emif_1_clkctrl, |
| &prcm->cm_memif_emif_2_clkctrl, |
| &prcm->cm_l4cfg_l4_cfg_clkctrl, |
| &prcm->cm_wkup_gpio1_clkctrl, |
| &prcm->cm_l4per_gpio2_clkctrl, |
| &prcm->cm_l4per_gpio3_clkctrl, |
| &prcm->cm_l4per_gpio4_clkctrl, |
| &prcm->cm_l4per_gpio5_clkctrl, |
| &prcm->cm_l4per_gpio6_clkctrl, |
| 0 |
| }; |
| |
| u32 *const clk_modules_explicit_en_essential[] = { |
| &prcm->cm_wkup_gptimer1_clkctrl, |
| &prcm->cm_l3init_hsmmc1_clkctrl, |
| &prcm->cm_l3init_hsmmc2_clkctrl, |
| &prcm->cm_l4per_gptimer2_clkctrl, |
| &prcm->cm_wkup_wdtimer2_clkctrl, |
| &prcm->cm_l4per_uart3_clkctrl, |
| 0 |
| }; |
| |
| /* Enable optional additional functional clock for GPIO4 */ |
| setbits_le32(&prcm->cm_l4per_gpio4_clkctrl, |
| GPIO4_CLKCTRL_OPTFCLKEN_MASK); |
| |
| /* Enable 96 MHz clock for MMC1 & MMC2 */ |
| setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl, |
| HSMMC_CLKCTRL_CLKSEL_MASK); |
| setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl, |
| HSMMC_CLKCTRL_CLKSEL_MASK); |
| |
| /* Select 32KHz clock as the source of GPTIMER1 */ |
| setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl, |
| GPTIMER1_CLKCTRL_CLKSEL_MASK); |
| |
| /* Enable optional 48M functional clock for USB PHY */ |
| setbits_le32(&prcm->cm_l3init_usbphy_clkctrl, |
| USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); |
| |
| do_enable_clocks(clk_domains_essential, |
| clk_modules_hw_auto_essential, |
| clk_modules_explicit_en_essential, |
| 1); |
| } |
| |
| void enable_basic_uboot_clocks(void) |
| { |
| u32 *const clk_domains_essential[] = { |
| 0 |
| }; |
| |
| u32 *const clk_modules_hw_auto_essential[] = { |
| &prcm->cm_l3init_hsusbotg_clkctrl, |
| &prcm->cm_l3init_usbphy_clkctrl, |
| &prcm->cm_l3init_usbphy_clkctrl, |
| &prcm->cm_clksel_usb_60mhz, |
| &prcm->cm_l3init_hsusbtll_clkctrl, |
| 0 |
| }; |
| |
| u32 *const clk_modules_explicit_en_essential[] = { |
| &prcm->cm_l4per_mcspi1_clkctrl, |
| &prcm->cm_l4per_i2c1_clkctrl, |
| &prcm->cm_l4per_i2c2_clkctrl, |
| &prcm->cm_l4per_i2c3_clkctrl, |
| &prcm->cm_l4per_i2c4_clkctrl, |
| &prcm->cm_l3init_hsusbhost_clkctrl, |
| 0 |
| }; |
| |
| do_enable_clocks(clk_domains_essential, |
| clk_modules_hw_auto_essential, |
| clk_modules_explicit_en_essential, |
| 1); |
| } |
| |
| /* |
| * Enable non-essential clock domains, modules and |
| * do some additional special settings needed |
| */ |
| void enable_non_essential_clocks(void) |
| { |
| u32 *const clk_domains_non_essential[] = { |
| &prcm->cm_mpu_m3_clkstctrl, |
| &prcm->cm_ivahd_clkstctrl, |
| &prcm->cm_dsp_clkstctrl, |
| &prcm->cm_dss_clkstctrl, |
| &prcm->cm_sgx_clkstctrl, |
| &prcm->cm1_abe_clkstctrl, |
| &prcm->cm_c2c_clkstctrl, |
| &prcm->cm_cam_clkstctrl, |
| &prcm->cm_dss_clkstctrl, |
| &prcm->cm_sdma_clkstctrl, |
| 0 |
| }; |
| |
| u32 *const clk_modules_hw_auto_non_essential[] = { |
| &prcm->cm_l3instr_l3_3_clkctrl, |
| &prcm->cm_l3instr_l3_instr_clkctrl, |
| &prcm->cm_l3instr_intrconn_wp1_clkctrl, |
| &prcm->cm_l3init_hsi_clkctrl, |
| 0 |
| }; |
| |
| u32 *const clk_modules_explicit_en_non_essential[] = { |
| &prcm->cm1_abe_aess_clkctrl, |
| &prcm->cm1_abe_pdm_clkctrl, |
| &prcm->cm1_abe_dmic_clkctrl, |
| &prcm->cm1_abe_mcasp_clkctrl, |
| &prcm->cm1_abe_mcbsp1_clkctrl, |
| &prcm->cm1_abe_mcbsp2_clkctrl, |
| &prcm->cm1_abe_mcbsp3_clkctrl, |
| &prcm->cm1_abe_slimbus_clkctrl, |
| &prcm->cm1_abe_timer5_clkctrl, |
| &prcm->cm1_abe_timer6_clkctrl, |
| &prcm->cm1_abe_timer7_clkctrl, |
| &prcm->cm1_abe_timer8_clkctrl, |
| &prcm->cm1_abe_wdt3_clkctrl, |
| &prcm->cm_l4per_gptimer9_clkctrl, |
| &prcm->cm_l4per_gptimer10_clkctrl, |
| &prcm->cm_l4per_gptimer11_clkctrl, |
| &prcm->cm_l4per_gptimer3_clkctrl, |
| &prcm->cm_l4per_gptimer4_clkctrl, |
| &prcm->cm_l4per_hdq1w_clkctrl, |
| &prcm->cm_l4per_mcbsp4_clkctrl, |
| &prcm->cm_l4per_mcspi2_clkctrl, |
| &prcm->cm_l4per_mcspi3_clkctrl, |
| &prcm->cm_l4per_mcspi4_clkctrl, |
| &prcm->cm_l4per_mmcsd3_clkctrl, |
| &prcm->cm_l4per_mmcsd4_clkctrl, |
| &prcm->cm_l4per_mmcsd5_clkctrl, |
| &prcm->cm_l4per_uart1_clkctrl, |
| &prcm->cm_l4per_uart2_clkctrl, |
| &prcm->cm_l4per_uart4_clkctrl, |
| &prcm->cm_wkup_keyboard_clkctrl, |
| &prcm->cm_wkup_wdtimer2_clkctrl, |
| &prcm->cm_cam_iss_clkctrl, |
| &prcm->cm_cam_fdif_clkctrl, |
| &prcm->cm_dss_dss_clkctrl, |
| &prcm->cm_sgx_sgx_clkctrl, |
| 0 |
| }; |
| |
| /* Enable optional functional clock for ISS */ |
| setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); |
| |
| /* Enable all optional functional clocks of DSS */ |
| setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); |
| |
| do_enable_clocks(clk_domains_non_essential, |
| clk_modules_hw_auto_non_essential, |
| clk_modules_explicit_en_non_essential, |
| 0); |
| |
| /* Put camera module in no sleep mode */ |
| clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK, |
| CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << |
| MODULE_CLKCTRL_MODULEMODE_SHIFT); |
| } |