| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */ |
| /* Based on code by myd_c335x.dts, MYiRtech.com */ |
| /* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */ |
| |
| /dts-v1/; |
| |
| #include "am335x-myirtech-myc.dtsi" |
| |
| #include <dt-bindings/display/tda998x.h> |
| #include <dt-bindings/input/input.h> |
| |
| / { |
| model = "MYIR MYD-AM335X"; |
| compatible = "myir,myd-am335x", "myir,myc-am335x", "ti,am33xx"; |
| |
| chosen { |
| stdout-path = &uart0; |
| }; |
| |
| clk12m: clk12m { |
| compatible = "fixed-clock"; |
| clock-frequency = <12000000>; |
| |
| #clock-cells = <0>; |
| }; |
| |
| gpio_buttons: gpio_buttons { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_buttons_pins>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| button1: button@0 { |
| reg = <0>; |
| label = "button1"; |
| linux,code = <BTN_1>; |
| gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; |
| }; |
| |
| button2: button@1 { |
| reg = <1>; |
| label = "button2"; |
| linux,code = <BTN_2>; |
| gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| sound: sound { |
| compatible = "simple-audio-card"; |
| simple-audio-card,format = "i2s"; |
| simple-audio-card,bitclock-master = <&master_codec>; |
| simple-audio-card,frame-master = <&master_codec>; |
| |
| simple-audio-card,cpu { |
| sound-dai = <&mcasp0>; |
| }; |
| |
| master_codec: simple-audio-card,codec@1 { |
| sound-dai = <&sgtl5000>; |
| }; |
| |
| simple-audio-card,codec@2 { |
| sound-dai = <&tda9988>; |
| }; |
| }; |
| |
| vdd_5v0: vdd_5v0_reg { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_5v0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vdd_3v3: vdd_3v3_reg { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| vin-supply = <&vdd_5v0>; |
| }; |
| }; |
| |
| &cpsw_port2 { |
| status = "okay"; |
| phy-handle = <&phy1>; |
| phy-mode = "rgmii-id"; |
| ti,dual-emac-pvid = <2>; |
| }; |
| |
| &davinci_mdio_sw { |
| phy1: ethernet-phy@6 { |
| reg = <6>; |
| eee-broken-1000t; |
| }; |
| }; |
| |
| &mac_sw { |
| pinctrl-0 = <ð_slave1_pins_default>, <ð_slave2_pins_default>; |
| pinctrl-1 = <ð_slave1_pins_sleep>, <ð_slave2_pins_sleep>; |
| slaves = <2>; |
| }; |
| |
| &dcan0 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&dcan0_pins_default>; |
| pinctrl-1 = <&dcan0_pins_sleep>; |
| status = "okay"; |
| }; |
| |
| &dcan1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&dcan1_pins_default>; |
| pinctrl-1 = <&dcan1_pins_sleep>; |
| status = "okay"; |
| }; |
| |
| &ehrpwm0 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&ehrpwm0_pins_default>; |
| pinctrl-1 = <&ehrpwm0_pins_sleep>; |
| status = "okay"; |
| }; |
| |
| &epwmss0 { |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default", "gpio", "sleep"; |
| pinctrl-0 = <&i2c1_pins_default>; |
| pinctrl-1 = <&i2c1_pins_gpio>; |
| pinctrl-2 = <&i2c1_pins_sleep>; |
| clock-frequency = <400000>; |
| scl-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| |
| sgtl5000: sgtl5000@a { |
| compatible = "fsl,sgtl5000"; |
| reg =<0xa>; |
| clocks = <&clk12m>; |
| micbias-resistor-k-ohms = <4>; |
| micbias-voltage-m-volts = <2250>; |
| VDDA-supply = <&vdd_3v3>; |
| VDDIO-supply = <&vdd_3v3>; |
| |
| #sound-dai-cells = <0>; |
| }; |
| |
| tda9988: tda9988@70 { |
| compatible = "nxp,tda998x"; |
| reg =<0x70>; |
| audio-ports = <TDA998x_I2S 1>; |
| |
| #sound-dai-cells = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| hdmi_0: endpoint { |
| remote-endpoint = <&lcdc_0>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &lcdc { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&lcdc_pins_default>; |
| pinctrl-1 = <&lcdc_pins_sleep>; |
| blue-and-red-wiring = "straight"; |
| status = "okay"; |
| |
| port { |
| lcdc_0: endpoint@0 { |
| remote-endpoint = <&hdmi_0>; |
| }; |
| }; |
| }; |
| |
| &leds { |
| pinctrl-0 = <&led_mod_pins &leds_pins>; |
| |
| led1: led1 { |
| label = "base:user1"; |
| gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; |
| color = <LED_COLOR_ID_GREEN>; |
| default-state = "off"; |
| }; |
| |
| led2: led2 { |
| label = "base:user2"; |
| gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; |
| color = <LED_COLOR_ID_GREEN>; |
| default-state = "off"; |
| }; |
| }; |
| |
| &mcasp0 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&mcasp0_pins_default>; |
| pinctrl-1 = <&mcasp0_pins_sleep>; |
| op-mode = <0>; |
| tdm-slots = <2>; |
| serial-dir = <0 1 2 0>; |
| tx-num-evt = <32>; |
| rx-num-evt = <32>; |
| status = "okay"; |
| |
| #sound-dai-cells = <0>; |
| }; |
| |
| &mmc1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&mmc1_pins_default>; |
| pinctrl-1 = <&mmc1_pins_sleep>; |
| cd-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; |
| bus-width = <4>; |
| vmmc-supply = <&vdd_3v3>; |
| status = "okay"; |
| }; |
| |
| &nand0 { |
| nand_parts: partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| partition@0 { |
| label = "MLO"; |
| reg = <0x00000 0x20000>; |
| }; |
| |
| partition@80000 { |
| label = "boot"; |
| reg = <0x80000 0x100000>; |
| }; |
| }; |
| }; |
| |
| &tscadc { |
| status = "okay"; |
| |
| adc: adc { |
| ti,adc-channels = <0 1 2 3 4 5 6>; |
| }; |
| }; |
| |
| &uart0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&uart1_pins_default>; |
| pinctrl-1 = <&uart1_pins_sleep>; |
| linux,rs485-enabled-at-boot-time; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&uart2_pins_default>; |
| pinctrl-1 = <&uart2_pins_sleep>; |
| status = "okay"; |
| }; |
| |
| &usb { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb_pins>; |
| }; |
| |
| &usb0 { |
| dr_mode = "otg"; |
| }; |
| |
| &usb0_phy { |
| vcc-supply = <&vdd_5v0>; |
| }; |
| |
| &usb1 { |
| dr_mode = "host"; |
| }; |
| |
| &usb1_phy { |
| vcc-supply = <&vdd_5v0>; |
| }; |
| |
| &vdd_mod { |
| vin-supply = <&vdd_3v3>; |
| }; |
| |
| &am33xx_pinmux { |
| dcan0_pins_default: dcan0-default-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan0_tx_mux2 */ |
| AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2) /* dcan0_rx_mux2 */ |
| >; |
| }; |
| |
| dcan0_pins_sleep: dcan0-sleep-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| >; |
| }; |
| |
| dcan1_pins_default: dcan1-default-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* dcan1_tx_mux0 */ |
| AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* dcan1_rx_mux0 */ |
| >; |
| }; |
| |
| dcan1_pins_sleep: dcan1-sleep-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| >; |
| }; |
| |
| ehrpwm0_pins_default: ehrpwm0-default-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_OUTPUT, MUX_MODE3) /* ehrpwm0A_mux1 */ |
| >; |
| }; |
| |
| ehrpwm0_pins_sleep: ehrpwm0-sleep-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| >; |
| }; |
| |
| eth_slave2_pins_default: eth-slave2-default-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_tctl */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rctl */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td3 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td2 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td1 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_td0 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* rgmii2_tclk */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rclk */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rd3 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) /* rgmii2_rd2 */ |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2 /* rgmii2_rd1 */) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2 /* rgmii2_rd0 */) |
| >; |
| }; |
| |
| eth_slave2_pins_sleep: eth-slave2-sleep-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| >; |
| }; |
| |
| gpio_buttons_pins: gpio-buttons-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7) /* gpio3[0] */ |
| AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT, MUX_MODE7) /* gpio0[29] */ |
| >; |
| }; |
| |
| i2c1_pins_default: i2c1-default-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SDA_mux3 */ |
| AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2) /* I2C1_SCL_mux3 */ |
| >; |
| }; |
| |
| i2c1_pins_gpio: i2c1-gpio-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE7) /* gpio0[4] */ |
| AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE7) /* gpio0[5] */ |
| >; |
| }; |
| |
| i2c1_pins_sleep: i2c1-sleep-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| >; |
| }; |
| |
| lcdc_pins_default: lcdc-default-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) /* lcd_data0 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) /* lcd_data1 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) /* lcd_data2 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) /* lcd_data3 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) /* lcd_data4 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) /* lcd_data5 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) /* lcd_data6 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) /* lcd_data7 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) /* lcd_data8 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) /* lcd_data9 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) /* lcd_data10 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) /* lcd_data11 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) /* lcd_data12 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) /* lcd_data13 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) /* lcd_data14 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) /* lcd_data15 */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) /* lcd_vsync */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) /* lcd_hsync */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) /* lcd_pclk */ |
| AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) /* lcd_ac_bias_en */ |
| >; |
| }; |
| |
| lcdc_pins_sleep: lcdc-sleep-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| >; |
| }; |
| |
| leds_pins: leds-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* gpio0[27] */ |
| AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE7) /* gpio0[3] */ |
| >; |
| }; |
| |
| mcasp0_pins_default: mcasp0-default-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_aclkx_mux0 */ |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_fsx_mux0 */ |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE2) /* mcasp0_axr2_mux0 */ |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0) /* mcasp0_axr1_mux0 */ |
| >; |
| }; |
| |
| mcasp0_pins_sleep: mcasp0-sleep-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| >; |
| }; |
| |
| mmc1_pins_default: mmc1-default-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat3 */ |
| AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat2 */ |
| AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat1 */ |
| AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_dat0 */ |
| AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_clk */ |
| AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) /* mmc0_cmd */ |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7) /* gpio3[21] */ |
| >; |
| }; |
| |
| mmc1_pins_sleep: mmc1-sleep-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLDOWN, MUX_MODE0) |
| AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLDOWN, MUX_MODE0) |
| AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLDOWN, MUX_MODE0) |
| AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLDOWN, MUX_MODE0) |
| AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) |
| AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLDOWN, MUX_MODE0) |
| AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| >; |
| }; |
| |
| uart0_pins: uart0-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart0_rxd */ |
| AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart0_txd */ |
| >; |
| }; |
| |
| uart1_pins_default: uart1-default-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) /* uart1_rxd */ |
| AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* uart1_txd */ |
| >; |
| }; |
| |
| uart1_pins_sleep: uart1-sleep-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| >; |
| }; |
| |
| uart2_pins_default: uart2-default-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE6) /* uart2_rxd_mux1 */ |
| AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_OUTPUT, MUX_MODE6) /* uart2_txd_mux1 */ |
| >; |
| }; |
| |
| uart2_pins_sleep: uart2-sleep-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7) |
| >; |
| }; |
| |
| usb_pins: usb-pins { |
| pinctrl-single,pins = < |
| AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB0_DRVVBUS */ |
| AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0) /* USB1_DRVVBUS */ |
| >; |
| }; |
| }; |