| # SPDX-License-Identifier: GPL-2.0-only |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Qualcomm's SPMI PMIC ADC |
| |
| maintainers: |
| - Andy Gross <agross@kernel.org> |
| - Bjorn Andersson <bjorn.andersson@linaro.org> |
| |
| description: | |
| SPMI PMIC voltage ADC (VADC) provides interface to clients to read |
| voltage. The VADC is a 15-bit sigma-delta ADC. |
| SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read |
| voltage. The VADC is a 16-bit sigma-delta ADC. |
| |
| properties: |
| compatible: |
| oneOf: |
| - items: |
| - const: qcom,pms405-adc |
| - const: qcom,spmi-adc-rev2 |
| - enum: |
| - qcom,spmi-vadc |
| - qcom,spmi-adc5 |
| - qcom,spmi-adc-rev2 |
| - qcom,spmi-adc7 |
| |
| reg: |
| description: VADC base address in the SPMI PMIC register map |
| maxItems: 1 |
| |
| '#address-cells': |
| const: 1 |
| |
| '#size-cells': |
| const: 0 |
| |
| '#io-channel-cells': |
| const: 1 |
| |
| interrupts: |
| maxItems: 1 |
| description: |
| End of conversion interrupt. |
| |
| required: |
| - compatible |
| - reg |
| - '#address-cells' |
| - '#size-cells' |
| - '#io-channel-cells' |
| |
| patternProperties: |
| "^channel@[0-9a-f]+$": |
| type: object |
| additionalProperties: false |
| description: | |
| Represents the external channels which are connected to the ADC. |
| For compatible property "qcom,spmi-vadc" following channels, also known as |
| reference point channels, are used for result calibration and their channel |
| configuration nodes should be defined: |
| VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV, |
| VADC_GND_REF and VADC_VDD_VADC. |
| |
| properties: |
| reg: |
| maxItems: 1 |
| description: | |
| ADC channel number. |
| See include/dt-bindings/iio/qcom,spmi-vadc.h |
| For PMIC7 ADC, the channel numbers are specified separately per PMIC |
| in the PMIC-specific files in include/dt-bindings/iio/. |
| |
| label: |
| $ref: /schemas/types.yaml#/definitions/string |
| description: | |
| ADC input of the platform as seen in the schematics. |
| For thermistor inputs connected to generic AMUX or GPIO inputs |
| these can vary across platform for the same pins. Hence select |
| the platform schematics name for this channel. |
| |
| qcom,decimation: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: | |
| This parameter is used to decrease ADC sampling rate. |
| Quicker measurements can be made by reducing decimation ratio. |
| |
| qcom,pre-scaling: |
| description: | |
| Used for scaling the channel input signal before the signal is |
| fed to VADC. The configuration for this node is to know the |
| pre-determined ratio and use it for post scaling. It is a pair of |
| integers, denoting the numerator and denominator of the fraction by which |
| input signal is multiplied. For example, <1 3> indicates the signal is scaled |
| down to 1/3 of its value before ADC measurement. |
| If property is not found default value depending on chip will be used. |
| $ref: /schemas/types.yaml#/definitions/uint32-array |
| oneOf: |
| - items: |
| - const: 1 |
| - enum: [ 1, 3, 4, 6, 20, 8, 10, 16 ] |
| - items: |
| - const: 10 |
| - const: 81 |
| |
| qcom,ratiometric: |
| description: | |
| Channel calibration type. |
| - For compatible property "qcom,spmi-vadc", if this property is |
| specified VADC will use the VDD reference (1.8V) and GND for |
| channel calibration. If property is not found, channel will be |
| calibrated with 0.625V and 1.25V reference channels, also |
| known as absolute calibration. |
| - For compatible property "qcom,spmi-adc5", "qcom,spmi-adc7" and |
| "qcom,spmi-adc-rev2", if this property is specified VADC will use |
| the VDD reference (1.875V) and GND for channel calibration. If |
| property is not found, channel will be calibrated with 0V and 1.25V |
| reference channels, also known as absolute calibration. |
| type: boolean |
| |
| qcom,hw-settle-time: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: | |
| Time between AMUX getting configured and the ADC starting |
| conversion. The 'hw_settle_time' is an index used from valid values |
| and programmed in hardware to achieve the hardware settling delay. |
| |
| qcom,avg-samples: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: | |
| Number of samples to be used for measurement. |
| Averaging provides the option to obtain a single measurement |
| from the ADC that is an average of multiple samples. The value |
| selected is 2^(value). |
| |
| required: |
| - reg |
| |
| allOf: |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: qcom,spmi-vadc |
| |
| then: |
| patternProperties: |
| "^channel@[0-9a-f]+$": |
| properties: |
| qcom,decimation: |
| enum: [ 512, 1024, 2048, 4096 ] |
| default: 512 |
| |
| qcom,hw-settle-time: |
| enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2, |
| 4, 6, 8, 10 ] |
| default: 0 |
| |
| qcom,avg-samples: |
| enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ] |
| default: 1 |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: qcom,spmi-adc-rev2 |
| |
| then: |
| patternProperties: |
| "^channel@[0-9a-f]+$": |
| properties: |
| qcom,decimation: |
| enum: [ 256, 512, 1024 ] |
| default: 1024 |
| |
| qcom,hw-settle-time: |
| enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2, |
| 4, 6, 8, 10 ] |
| default: 0 |
| |
| qcom,avg-samples: |
| enum: [ 1, 2, 4, 8, 16 ] |
| default: 1 |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: qcom,spmi-adc5 |
| |
| then: |
| patternProperties: |
| "^channel@[0-9a-f]+$": |
| properties: |
| qcom,decimation: |
| enum: [ 250, 420, 840 ] |
| default: 840 |
| |
| qcom,hw-settle-time: |
| enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2, |
| 4, 6, 8, 10, 16, 32, 64, 128 ] |
| default: 15 |
| |
| qcom,avg-samples: |
| enum: [ 1, 2, 4, 8, 16 ] |
| default: 1 |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: qcom,spmi-adc7 |
| |
| then: |
| patternProperties: |
| "^channel@[0-9a-f]+$": |
| properties: |
| qcom,decimation: |
| enum: [ 85, 340, 1360 ] |
| default: 1360 |
| |
| qcom,hw-settle-time: |
| enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, |
| 8000, 16000, 32000, 64000, 128000 ] |
| default: 15 |
| |
| qcom,avg-samples: |
| enum: [ 1, 2, 4, 8, 16 ] |
| default: 1 |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| pmic { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| adc@3100 { |
| compatible = "qcom,spmi-vadc"; |
| reg = <0x3100>; |
| interrupts = <0x0 0x31 0x0 0x1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #io-channel-cells = <1>; |
| |
| /* Channel node */ |
| channel@39 { |
| reg = <0x39>; |
| qcom,decimation = <512>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,avg-samples = <1>; |
| qcom,pre-scaling = <1 3>; |
| }; |
| |
| channel@9 { |
| reg = <0x9>; |
| }; |
| |
| channel@a { |
| reg = <0xa>; |
| }; |
| |
| channel@e { |
| reg = <0xe>; |
| }; |
| |
| channel@f { |
| reg = <0xf>; |
| }; |
| }; |
| }; |
| |
| - | |
| #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> |
| #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| pmic { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| adc@3100 { |
| reg = <0x3100>; |
| compatible = "qcom,spmi-adc7"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #io-channel-cells = <1>; |
| |
| /* Other properties are omitted */ |
| channel@44 { |
| reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| label = "xo_therm"; |
| }; |
| |
| channel@47 { |
| reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| label = "conn_therm"; |
| }; |
| }; |
| }; |