| /* |
| * Copyright (C) 2013 Samsung Electronics |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| * |
| * Configuration settings for the SAMSUNG Arndale board. |
| */ |
| |
| #ifndef __CONFIG_ARNDALE_H |
| #define __CONFIG_ARNDALE_H |
| |
| /* High Level Configuration Options */ |
| #define CONFIG_SAMSUNG /* in a SAMSUNG core */ |
| #define CONFIG_S5P /* S5P Family */ |
| #define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ |
| #define CONFIG_EXYNOS5250 |
| |
| #include <asm/arch/cpu.h> /* get chip and board defs */ |
| |
| #define CONFIG_SYS_GENERIC_BOARD |
| #define CONFIG_ARCH_CPU_INIT |
| #define CONFIG_DISPLAY_CPUINFO |
| #define CONFIG_DISPLAY_BOARDINFO |
| |
| /* Enable fdt support for Exynos5250 */ |
| #define CONFIG_ARCH_DEVICE_TREE exynos5250 |
| #define CONFIG_OF_CONTROL |
| #define CONFIG_OF_SEPARATE |
| |
| /* Allow tracing to be enabled */ |
| #define CONFIG_TRACE |
| #define CONFIG_CMD_TRACE |
| #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) |
| #define CONFIG_TRACE_EARLY_SIZE (8 << 20) |
| #define CONFIG_TRACE_EARLY |
| #define CONFIG_TRACE_EARLY_ADDR 0x50000000 |
| |
| /* Keep L2 Cache Disabled */ |
| #define CONFIG_SYS_DCACHE_OFF |
| |
| #define CONFIG_SYS_SDRAM_BASE 0x40000000 |
| #define CONFIG_SYS_TEXT_BASE 0x43E00000 |
| |
| /* input clock of PLL: SMDK5250 has 24MHz input clock */ |
| #define CONFIG_SYS_CLK_FREQ 24000000 |
| |
| #define CONFIG_SETUP_MEMORY_TAGS |
| #define CONFIG_CMDLINE_TAG |
| #define CONFIG_INITRD_TAG |
| #define CONFIG_CMDLINE_EDITING |
| |
| /* Power Down Modes */ |
| #define S5P_CHECK_SLEEP 0x00000BAD |
| #define S5P_CHECK_DIDLE 0xBAD00000 |
| #define S5P_CHECK_LPA 0xABAD0000 |
| |
| /* Offset for inform registers */ |
| #define INFORM0_OFFSET 0x800 |
| #define INFORM1_OFFSET 0x804 |
| |
| /* Size of malloc() pool */ |
| #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) |
| |
| /* select serial console configuration */ |
| #define CONFIG_BAUDRATE 115200 |
| #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 |
| #define CONFIG_SILENT_CONSOLE |
| |
| /* Console configuration */ |
| #define CONFIG_CONSOLE_MUX |
| #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| #define EXYNOS_DEVICE_SETTINGS \ |
| "stdin=serial\0" \ |
| "stdout=serial\0" \ |
| "stderr=serial\0" |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| EXYNOS_DEVICE_SETTINGS |
| |
| /* SD/MMC configuration */ |
| #define CONFIG_GENERIC_MMC |
| #define CONFIG_MMC |
| #define CONFIG_SDHCI |
| #define CONFIG_S5P_SDHCI |
| #define CONFIG_DWMMC |
| #define CONFIG_EXYNOS_DWMMC |
| #define CONFIG_SUPPORT_EMMC_BOOT |
| #define CONFIG_BOUNCE_BUFFER |
| |
| |
| #define CONFIG_BOARD_EARLY_INIT_F |
| #define CONFIG_SKIP_LOWLEVEL_INIT |
| |
| /* PWM */ |
| #define CONFIG_PWM |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| /* Command definition*/ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_ELF |
| #define CONFIG_CMD_MMC |
| #define CONFIG_CMD_EXT2 |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_HASH |
| |
| #define CONFIG_BOOTDELAY 3 |
| #define CONFIG_ZERO_BOOTDELAY_CHECK |
| |
| /* USB */ |
| #define CONFIG_CMD_USB |
| #define CONFIG_USB_EHCI |
| #define CONFIG_USB_EHCI_EXYNOS |
| #define CONFIG_USB_STORAGE |
| |
| /* MMC SPL */ |
| #define CONFIG_EXYNOS_SPL |
| #define CONFIG_SPL |
| #define COPY_BL2_FNPTR_ADDR 0x02020030 |
| |
| #define CONFIG_SPL_LIBCOMMON_SUPPORT |
| |
| /* specific .lds file */ |
| #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" |
| #define CONFIG_SPL_TEXT_BASE 0x02023400 |
| #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) |
| |
| #define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000" |
| |
| /* Miscellaneous configurable options */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ |
| #define CONFIG_SYS_PROMPT "ARNDALE # " |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" |
| /* Boot Argument Buffer Size */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| /* memtest works on */ |
| #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE |
| #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) |
| #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) |
| |
| #define CONFIG_RD_LVL |
| |
| #define CONFIG_NR_DRAM_BANKS 8 |
| #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ |
| #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE |
| #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE |
| #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) |
| #define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE |
| #define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) |
| #define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE |
| #define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) |
| #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE |
| #define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE)) |
| #define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE |
| #define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE)) |
| #define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE |
| #define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE)) |
| #define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE |
| #define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) |
| #define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE |
| |
| #define CONFIG_SYS_MONITOR_BASE 0x00000000 |
| |
| /* FLASH and environment organization */ |
| #define CONFIG_SYS_NO_FLASH |
| #undef CONFIG_CMD_IMLS |
| #define CONFIG_IDENT_STRING " for ARNDALE" |
| |
| #define CONFIG_SYS_MMC_ENV_DEV 0 |
| |
| #define CONFIG_ENV_IS_IN_MMC |
| #define CONFIG_SECURE_BL1_ONLY |
| |
| /* Secure FW size configuration */ |
| #ifdef CONFIG_SECURE_BL1_ONLY |
| #define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ |
| #else |
| #define CONFIG_SEC_FW_SIZE 0 |
| #endif |
| |
| /* Configuration of BL1, BL2, ENV Blocks on mmc */ |
| #define CONFIG_RES_BLOCK_SIZE (512) |
| #define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ |
| #define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ |
| #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ |
| |
| #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) |
| #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) |
| #define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) |
| |
| /* U-boot copy size from boot Media to DRAM.*/ |
| #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) |
| #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) |
| |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_EFI_PARTITION |
| #define CONFIG_CMD_PART |
| #define CONFIG_PARTITION_UUIDS |
| |
| |
| #define CONFIG_IRAM_STACK 0x02050000 |
| |
| #define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK |
| |
| /* I2C */ |
| #define CONFIG_SYS_I2C_INIT_BOARD |
| #define CONFIG_SYS_I2C |
| #define CONFIG_CMD_I2C |
| #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ |
| #define CONFIG_SYS_I2C_S3C24X0 |
| #define CONFIG_MAX_I2C_NUM 8 |
| #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 |
| #define CONFIG_I2C_EDID |
| |
| /* PMIC */ |
| #define CONFIG_PMIC |
| #define CONFIG_PMIC_I2C |
| #define CONFIG_PMIC_MAX77686 |
| |
| #define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale |
| |
| /* Ethernet Controllor Driver */ |
| #ifdef CONFIG_CMD_NET |
| #define CONFIG_SMC911X |
| #define CONFIG_SMC911X_BASE 0x5000000 |
| #define CONFIG_SMC911X_16_BIT |
| #define CONFIG_ENV_SROM_BANK 1 |
| #endif /*CONFIG_CMD_NET*/ |
| |
| /* Enable PXE Support */ |
| #ifdef CONFIG_CMD_NET |
| #define CONFIG_CMD_PXE |
| #define CONFIG_MENU |
| #endif |
| |
| /* Enable devicetree support */ |
| #define CONFIG_OF_LIBFDT |
| |
| /* Enable Time Command */ |
| #define CONFIG_CMD_TIME |
| |
| #endif /* __CONFIG_H */ |