| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ |
| * Written by Jean-Jacques Hiblot <jjhiblot@ti.com> |
| */ |
| |
| #include <clk.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <dm/device.h> |
| #include <dm/device_compat.h> |
| #include <generic-phy.h> |
| #include <asm-generic/gpio.h> |
| |
| struct nop_phy_priv { |
| struct clk_bulk bulk; |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| struct gpio_desc reset_gpio; |
| #endif |
| }; |
| |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| static int nop_phy_reset(struct phy *phy) |
| { |
| struct nop_phy_priv *priv = dev_get_priv(phy->dev); |
| |
| /* Return if there is no gpio since it's optional */ |
| if (!dm_gpio_is_valid(&priv->reset_gpio)) |
| return 0; |
| |
| return dm_gpio_set_value(&priv->reset_gpio, true); |
| } |
| #endif |
| |
| static int nop_phy_init(struct phy *phy) |
| { |
| struct nop_phy_priv *priv = dev_get_priv(phy->dev); |
| int ret = 0; |
| |
| if (CONFIG_IS_ENABLED(CLK)) { |
| ret = clk_enable_bulk(&priv->bulk); |
| if (ret) |
| return ret; |
| } |
| |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| /* Take phy out of reset */ |
| ret = dm_gpio_set_value(&priv->reset_gpio, false); |
| if (ret) { |
| if (CONFIG_IS_ENABLED(CLK)) |
| clk_disable_bulk(&priv->bulk); |
| return ret; |
| } |
| #endif |
| return 0; |
| } |
| |
| static int nop_phy_probe(struct udevice *dev) |
| { |
| struct nop_phy_priv *priv = dev_get_priv(dev); |
| int ret = 0; |
| |
| if (CONFIG_IS_ENABLED(CLK)) { |
| ret = clk_get_bulk(dev, &priv->bulk); |
| if (ret < 0) { |
| dev_err(dev, "Failed to get clk: %d\n", ret); |
| return ret; |
| } |
| } |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| ret = gpio_request_by_name(dev, "reset-gpios", 0, |
| &priv->reset_gpio, |
| GPIOD_IS_OUT); |
| #endif |
| if (ret != -ENOENT) |
| return ret; |
| |
| return 0; |
| } |
| |
| static const struct udevice_id nop_phy_ids[] = { |
| { .compatible = "nop-phy" }, |
| { .compatible = "usb-nop-xceiv" }, |
| { } |
| }; |
| |
| static struct phy_ops nop_phy_ops = { |
| .init = nop_phy_init, |
| #if CONFIG_IS_ENABLED(DM_GPIO) |
| .reset = nop_phy_reset, |
| #endif |
| }; |
| |
| U_BOOT_DRIVER(nop_phy) = { |
| .name = "nop_phy", |
| .id = UCLASS_PHY, |
| .of_match = nop_phy_ids, |
| .ops = &nop_phy_ops, |
| .probe = nop_phy_probe, |
| .priv_auto = sizeof(struct nop_phy_priv), |
| }; |