blob: 1d6b002702b6aad2da4fd2130230a454db5133cb [file] [log] [blame]
/*
* (C) Copyright 2010,2011
* NVIDIA Corporation <www.nvidia.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ns16550.h>
#include <asm/io.h>
#include <asm/arch/tegra2.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/board.h>
#include <asm/arch/clk_rst.h>
#include <asm/arch/clock.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/pmc.h>
#include <asm/arch/pmu.h>
#include <asm/arch/uart.h>
#include <asm/arch/warmboot.h>
#include <spi.h>
#include <asm/arch/usb.h>
#include <i2c.h>
#include "board.h"
DECLARE_GLOBAL_DATA_PTR;
const struct tegra2_sysinfo sysinfo = {
CONFIG_TEGRA2_BOARD_STRING
};
/*
* Routine: timer_init
* Description: init the timestamp and lastinc value
*/
int timer_init(void)
{
return 0;
}
void __pin_mux_usb(void)
{
}
void pin_mux_usb(void) __attribute__((weak, alias("__pin_mux_usb")));
/*
* Routine: power_det_init
* Description: turn off power detects
*/
static void power_det_init(void)
{
#if defined(CONFIG_TEGRA2)
struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
/* turn off power detects */
writel(0, &pmc->pmc_pwr_det_latch);
writel(0, &pmc->pmc_pwr_det);
#endif
}
/*
* Routine: board_init
* Description: Early hardware init.
*/
int board_init(void)
{
/* Do clocks and UART first so that printf() works */
clock_init();
clock_verify();
#ifdef CONFIG_SPI_UART_SWITCH
gpio_config_uart();
#endif
#ifdef CONFIG_TEGRA2_SPI
spi_init();
#endif
/* boot param addr */
gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
power_det_init();
#ifdef CONFIG_TEGRA_I2C
#ifndef CONFIG_SYS_I2C_INIT_BOARD
#error "You must define CONFIG_SYS_I2C_INIT_BOARD to use i2c on Nvidia boards"
#endif
i2c_init_board();
# ifdef CONFIG_TEGRA_PMU
if (pmu_set_nominal())
debug("Failed to select nominal voltages\n");
# endif
#endif
#ifdef CONFIG_USB_EHCI_TEGRA
pin_mux_usb();
board_usb_init(gd->fdt_blob);
#endif
#ifdef CONFIG_TEGRA2_LP0
/* prepare the WB code to LP0 location */
warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE);
#endif
return 0;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
board_init_uart_f();
/* Initialize periph GPIOs */
#ifdef CONFIG_SPI_UART_SWITCH
gpio_early_init_uart();
#else
gpio_config_uart();
#endif
return 0;
}
#endif /* EARLY_INIT */