| /* |
| * (C) Copyright 2001 |
| * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net |
| * |
| * (C) Copyright 2001-2004 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2003 |
| * Texas Instruments, <www.ti.com> |
| * Kshitij Gupta <Kshitij@ti.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <linux/byteorder/swab.h> |
| |
| #define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ |
| flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ |
| |
| /* Board support for 1 or 2 flash devices */ |
| #undef FLASH_PORT_WIDTH32 |
| #define FLASH_PORT_WIDTH16 |
| |
| #ifdef FLASH_PORT_WIDTH16 |
| #define FLASH_PORT_WIDTH ushort |
| #define FLASH_PORT_WIDTHV vu_short |
| #define SWAP(x) __swab16(x) |
| #else |
| #define FLASH_PORT_WIDTH ulong |
| #define FLASH_PORT_WIDTHV vu_long |
| #define SWAP(x) __swab32(x) |
| #endif |
| |
| #define FPW FLASH_PORT_WIDTH |
| #define FPWV FLASH_PORT_WIDTHV |
| |
| #define mb() __asm__ __volatile__ ("" : : : "memory") |
| |
| |
| /* Flash Organization Structure */ |
| typedef struct OrgDef { |
| unsigned int sector_number; |
| unsigned int sector_size; |
| } OrgDef; |
| |
| |
| /* Flash Organizations */ |
| OrgDef OrgIntel_28F256L18T[] = { |
| {4, 32 * 1024}, /* 4 * 32kBytes sectors */ |
| {255, 128 * 1024}, /* 255 * 128kBytes sectors */ |
| }; |
| |
| |
| /*----------------------------------------------------------------------- |
| * Functions |
| */ |
| unsigned long flash_init (void); |
| static ulong flash_get_size (FPW * addr, flash_info_t * info); |
| static int write_data (flash_info_t * info, ulong dest, FPW data); |
| static void flash_get_offsets (ulong base, flash_info_t * info); |
| void inline spin_wheel (void); |
| void flash_print_info (flash_info_t * info); |
| void flash_unprotect_sectors (FPWV * addr); |
| int flash_erase (flash_info_t * info, int s_first, int s_last); |
| int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt); |
| void flash_unlock(flash_info_t * info); |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| unsigned long flash_init (void) |
| { |
| int i; |
| ulong size = 0; |
| |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { |
| switch (i) { |
| case 0: |
| flash_get_size ((FPW *) CONFIG_SYS_FLASH_BASE, &flash_info[i]); |
| flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[i]); |
| /* to reset the lock bit */ |
| flash_unlock(&flash_info[i]); |
| break; |
| default: |
| panic ("configured too many flash banks!\n"); |
| break; |
| } |
| size += flash_info[i].size; |
| } |
| |
| /* Protect monitor and environment sectors |
| */ |
| flash_protect (FLAG_PROTECT_SET, |
| CONFIG_SYS_FLASH_BASE, |
| CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); |
| |
| flash_protect (FLAG_PROTECT_SET, |
| CONFIG_ENV_ADDR, |
| CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); |
| |
| return size; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| void flash_unlock(flash_info_t * info) |
| { |
| int j; |
| for (j=2;j<CONFIG_SYS_MAX_FLASH_SECT;j++){ |
| FPWV *addr = (FPWV *) (info->start[j]); |
| flash_unprotect_sectors (addr); |
| *addr = (FPW) 0x00500050;/* clear status register */ |
| *addr = (FPW) 0x00FF00FF;/* resest to read mode */ |
| } |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| static void flash_get_offsets (ulong base, flash_info_t * info) |
| { |
| int i; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| return; |
| } |
| |
| if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { |
| for (i = 0; i < info->sector_count; i++) { |
| if (i > 255) { |
| info->start[i] = base + (i * 0x8000); |
| info->protect[i] = 0; |
| } else { |
| info->start[i] = base + |
| (i * PHYS_FLASH_SECT_SIZE); |
| info->protect[i] = 0; |
| } |
| } |
| } |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| void flash_print_info (flash_info_t * info) |
| { |
| int i; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| switch (info->flash_id & FLASH_VENDMASK) { |
| case FLASH_MAN_INTEL: |
| printf ("INTEL "); |
| break; |
| default: |
| printf ("Unknown Vendor "); |
| break; |
| } |
| |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_28F256L18T: |
| printf ("FLASH 28F256L18T\n"); |
| break; |
| default: |
| printf ("Unknown Chip Type\n"); |
| break; |
| } |
| |
| printf (" Size: %ld MB in %d Sectors\n", |
| info->size >> 20, info->sector_count); |
| |
| printf (" Sector Start Addresses:"); |
| for (i = 0; i < info->sector_count; ++i) { |
| if ((i % 5) == 0) |
| printf ("\n "); |
| printf (" %08lX%s", |
| info->start[i], info->protect[i] ? " (RO)" : " "); |
| } |
| printf ("\n"); |
| return; |
| } |
| |
| /* |
| * The following code cannot be run from FLASH! |
| */ |
| static ulong flash_get_size (FPW * addr, flash_info_t * info) |
| { |
| volatile FPW value; |
| |
| /* Write auto select command: read Manufacturer ID */ |
| addr[0x5555] = (FPW) 0x00AA00AA; |
| addr[0x2AAA] = (FPW) 0x00550055; |
| addr[0x5555] = (FPW) 0x00900090; |
| |
| mb (); |
| value = addr[0]; |
| |
| switch (value) { |
| |
| case (FPW) INTEL_MANUFACT: |
| info->flash_id = FLASH_MAN_INTEL; |
| break; |
| |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| info->sector_count = 0; |
| info->size = 0; |
| addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ |
| return (0); /* no or unknown flash */ |
| } |
| |
| mb (); |
| value = addr[1]; /* device ID */ |
| switch (value) { |
| |
| case (FPW) (INTEL_ID_28F256L18T): |
| info->flash_id += FLASH_28F256L18T; |
| info->sector_count = 259; |
| info->size = 0x02000000; |
| break; /* => 32 MB */ |
| |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| break; |
| } |
| |
| if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { |
| printf ("** ERROR: sector count %d > max (%d) **\n", |
| info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); |
| info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; |
| } |
| |
| addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ |
| |
| return (info->size); |
| } |
| |
| |
| /* unprotects a sector for write and erase |
| * on some intel parts, this unprotects the entire chip, but it |
| * wont hurt to call this additional times per sector... |
| */ |
| void flash_unprotect_sectors (FPWV * addr) |
| { |
| #define PD_FINTEL_WSMS_READY_MASK 0x0080 |
| |
| *addr = (FPW) 0x00500050; /* clear status register */ |
| |
| /* this sends the clear lock bit command */ |
| *addr = (FPW) 0x00600060; |
| *addr = (FPW) 0x00D000D0; |
| } |
| |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| int flash_erase (flash_info_t * info, int s_first, int s_last) |
| { |
| int flag, prot, sect; |
| ulong type, start; |
| int rcode = 0; |
| |
| if ((s_first < 0) || (s_first > s_last)) { |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("- missing\n"); |
| } else { |
| printf ("- no sectors to erase\n"); |
| } |
| return 1; |
| } |
| |
| type = (info->flash_id & FLASH_VENDMASK); |
| if ((type != FLASH_MAN_INTEL)) { |
| printf ("Can't erase unknown flash type %08lx - aborted\n", |
| info->flash_id); |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect = s_first; sect <= s_last; ++sect) { |
| if (info->protect[sect]) { |
| prot++; |
| } |
| } |
| |
| if (prot) { |
| printf ("- Warning: %d protected sectors will not be erased!\n", |
| prot); |
| } else { |
| printf ("\n"); |
| } |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts (); |
| |
| /* Start erase on unprotected sectors */ |
| for (sect = s_first; sect <= s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| FPWV *addr = (FPWV *) (info->start[sect]); |
| FPW status; |
| |
| printf ("Erasing sector %2d ... ", sect); |
| |
| flash_unprotect_sectors (addr); |
| |
| /* arm simple, non interrupt dependent timer */ |
| start = get_timer(0); |
| |
| *addr = (FPW) 0x00500050;/* clear status register */ |
| *addr = (FPW) 0x00200020;/* erase setup */ |
| *addr = (FPW) 0x00D000D0;/* erase confirm */ |
| |
| while (((status = |
| *addr) & (FPW) 0x00800080) != |
| (FPW) 0x00800080) { |
| if (get_timer(start) > |
| CONFIG_SYS_FLASH_ERASE_TOUT) { |
| printf ("Timeout\n"); |
| /* suspend erase */ |
| *addr = (FPW) 0x00B000B0; |
| /* reset to read mode */ |
| *addr = (FPW) 0x00FF00FF; |
| rcode = 1; |
| break; |
| } |
| } |
| |
| /* clear status register cmd. */ |
| *addr = (FPW) 0x00500050; |
| *addr = (FPW) 0x00FF00FF;/* resest to read mode */ |
| printf (" done\n"); |
| } |
| } |
| if (flag) |
| enable_interrupts(); |
| |
| return rcode; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| * 4 - Flash not identified |
| */ |
| |
| int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) |
| { |
| ulong cp, wp; |
| FPW data; |
| int count, i, l, rc, port_width; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| return 4; |
| } |
| /* get lower word aligned address */ |
| #ifdef FLASH_PORT_WIDTH16 |
| wp = (addr & ~1); |
| port_width = 2; |
| #else |
| wp = (addr & ~3); |
| port_width = 4; |
| #endif |
| |
| /* |
| * handle unaligned start bytes |
| */ |
| if ((l = addr - wp) != 0) { |
| data = 0; |
| for (i = 0, cp = wp; i < l; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *) cp); |
| } |
| for (; i < port_width && cnt > 0; ++i) { |
| data = (data << 8) | *src++; |
| --cnt; |
| ++cp; |
| } |
| for (; cnt == 0 && i < port_width; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *) cp); |
| } |
| |
| if ((rc = write_data (info, wp, SWAP (data))) != 0) { |
| return (rc); |
| } |
| wp += port_width; |
| } |
| |
| /* |
| * handle word aligned part |
| */ |
| count = 0; |
| while (cnt >= port_width) { |
| data = 0; |
| for (i = 0; i < port_width; ++i) { |
| data = (data << 8) | *src++; |
| } |
| if ((rc = write_data (info, wp, SWAP (data))) != 0) { |
| return (rc); |
| } |
| wp += port_width; |
| cnt -= port_width; |
| if (count++ > 0x800) { |
| spin_wheel (); |
| count = 0; |
| } |
| } |
| |
| if (cnt == 0) { |
| return (0); |
| } |
| |
| /* |
| * handle unaligned tail bytes |
| */ |
| data = 0; |
| for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { |
| data = (data << 8) | *src++; |
| --cnt; |
| } |
| for (; i < port_width; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *) cp); |
| } |
| |
| return (write_data (info, wp, SWAP (data))); |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Write a word or halfword to Flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| static int write_data (flash_info_t * info, ulong dest, FPW data) |
| { |
| FPWV *addr = (FPWV *) dest; |
| ulong status; |
| int flag, rc = 0; |
| ulong start; |
| |
| /* Check if Flash is (sufficiently) erased */ |
| if ((*addr & data) != data) { |
| printf("not erased at %08lx (%x)\n", (ulong) addr, *addr); |
| return 2; |
| } |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts (); |
| *addr = (FPW) 0x00400040; /* write setup */ |
| *addr = data; |
| |
| /* arm simple, non interrupt dependent timer */ |
| start = get_timer(0); |
| |
| /* wait while polling the status register */ |
| while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { |
| if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { |
| rc = 1; |
| goto done; |
| } |
| } |
| done: |
| if (flag) |
| enable_interrupts(); |
| |
| *addr = (FPW) 0x00FF00FF; /* restore read mode */ |
| return rc; |
| } |
| |
| void inline spin_wheel (void) |
| { |
| static int p = 0; |
| static char w[] = "\\/-"; |
| |
| printf ("\010%c", w[p]); |
| (++p == 3) ? (p = 0) : 0; |
| } |