arch/arm/mach-sunxi/spl_spi_sunxi.c - filogic/uboot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2016 Siarhei Siamashka <siarhei.siamashka@gmail.com>
  */

 #include <common.h>
 #include <spl.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
 #include <linux/libfdt.h>

 #ifdef CONFIG_SPL_OS_BOOT
 #error CONFIG_SPL_OS_BOOT is not supported yet
 #endif

 /*
  * This is a very simple U-Boot image loading implementation, trying to
  * replicate what the boot ROM is doing when loading the SPL. Because we
  * know the exact pins where the SPI Flash is connected and also know
  * that the Read Data Bytes (03h) command is supported, the hardware
  * configuration is very simple and we don't need the extra flexibility
  * of the SPI framework. Moreover, we rely on the default settings of
  * the SPI controler hardware registers and only adjust what needs to
  * be changed. This is good for the code size and this implementation
  * adds less than 400 bytes to the SPL.
  *
  * There are two variants of the SPI controller in Allwinner SoCs:
  * A10/A13/A20 (sun4i variant) and everything else (sun6i variant).
  * Both of them are supported.
  *
  * The pin mixing part is SoC specific and only A10/A13/A20/H3/A64 are
  * supported at the moment.
  */

 /*****************************************************************************/
 /* SUN4I variant of the SPI controller                                       */
 /*****************************************************************************/

 #define SUN4I_SPI0_CCTL             0x1C
 #define SUN4I_SPI0_CTL              0x08
 #define SUN4I_SPI0_RX               0x00
 #define SUN4I_SPI0_TX               0x04
 #define SUN4I_SPI0_FIFO_STA         0x28
 #define SUN4I_SPI0_BC               0x20
 #define SUN4I_SPI0_TC               0x24

 #define SUN4I_CTL_ENABLE            BIT(0)
 #define SUN4I_CTL_MASTER            BIT(1)
 #define SUN4I_CTL_TF_RST            BIT(8)
 #define SUN4I_CTL_RF_RST            BIT(9)
 #define SUN4I_CTL_XCH               BIT(10)

 /*****************************************************************************/
 /* SUN6I variant of the SPI controller                                       */
 /*****************************************************************************/

 #define SUN6I_SPI0_CCTL             0x24
 #define SUN6I_SPI0_GCR              0x04
 #define SUN6I_SPI0_TCR              0x08
 #define SUN6I_SPI0_FIFO_STA         0x1C
 #define SUN6I_SPI0_MBC              0x30
 #define SUN6I_SPI0_MTC              0x34
 #define SUN6I_SPI0_BCC              0x38
 #define SUN6I_SPI0_TXD              0x200
 #define SUN6I_SPI0_RXD              0x300

 #define SUN6I_CTL_ENABLE            BIT(0)
 #define SUN6I_CTL_MASTER            BIT(1)
 #define SUN6I_CTL_SRST              BIT(31)
 #define SUN6I_TCR_XCH               BIT(31)

 /*****************************************************************************/

 #define CCM_AHB_GATING0             (0x01C20000 + 0x60)
 #define CCM_SPI0_CLK                (0x01C20000 + 0xA0)
 #define SUN6I_BUS_SOFT_RST_REG0     (0x01C20000 + 0x2C0)

 #define AHB_RESET_SPI0_SHIFT        20
 #define AHB_GATE_OFFSET_SPI0        20

 #define SPI0_CLK_DIV_BY_2           0x1000
 #define SPI0_CLK_DIV_BY_4           0x1001

 /*****************************************************************************/

 /*
  * Allwinner A10/A20 SoCs were using pins PC0,PC1,PC2,PC23 for booting
  * from SPI Flash, everything else is using pins PC0,PC1,PC2,PC3.
  */
 static void spi0_pinmux_setup(unsigned int pin_function)
 {
 	unsigned int pin;

 	for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(2); pin++)
 		sunxi_gpio_set_cfgpin(pin, pin_function);

 	if (IS_ENABLED(CONFIG_MACH_SUN4I) || IS_ENABLED(CONFIG_MACH_SUN7I))
 		sunxi_gpio_set_cfgpin(SUNXI_GPC(23), pin_function);
 	else
 		sunxi_gpio_set_cfgpin(SUNXI_GPC(3), pin_function);
 }

 static bool is_sun6i_gen_spi(void)
 {
 	return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I);
 }

 static uintptr_t spi0_base_address(void)
 {
 	if (!is_sun6i_gen_spi())
 		return 0x01C05000;

 	return 0x01C68000;
 }

 /*
  * Setup 6 MHz from OSC24M (because the BROM is doing the same).
  */
 static void spi0_enable_clock(void)
 {
 	uintptr_t base = spi0_base_address();

 	/* Deassert SPI0 reset on SUN6I */
 	if (is_sun6i_gen_spi())
 		setbits_le32(SUN6I_BUS_SOFT_RST_REG0,
 			     (1 << AHB_RESET_SPI0_SHIFT));

 	/* Open the SPI0 gate */
 	setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));

 	/* Divide by 4 */
 	writel(SPI0_CLK_DIV_BY_4, base + (is_sun6i_gen_spi() ?
 				  SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL));
 	/* 24MHz from OSC24M */
 	writel((1 << 31), CCM_SPI0_CLK);

 	if (is_sun6i_gen_spi()) {
 		/* Enable SPI in the master mode and do a soft reset */
 		setbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
 			     SUN6I_CTL_ENABLE | SUN6I_CTL_SRST);
 		/* Wait for completion */
 		while (readl(base + SUN6I_SPI0_GCR) & SUN6I_CTL_SRST)
 			;
 	} else {
 		/* Enable SPI in the master mode and reset FIFO */
 		setbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
 						    SUN4I_CTL_ENABLE |
 						    SUN4I_CTL_TF_RST |
 						    SUN4I_CTL_RF_RST);
 	}
 }

 static void spi0_disable_clock(void)
 {
 	uintptr_t base = spi0_base_address();

 	/* Disable the SPI0 controller */
 	if (is_sun6i_gen_spi())
 		clrbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER |
 					     SUN6I_CTL_ENABLE);
 	else
 		clrbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER |
 					     SUN4I_CTL_ENABLE);

 	/* Disable the SPI0 clock */
 	writel(0, CCM_SPI0_CLK);

 	/* Close the SPI0 gate */
 	clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));

 	/* Assert SPI0 reset on SUN6I */
 	if (is_sun6i_gen_spi())
 		clrbits_le32(SUN6I_BUS_SOFT_RST_REG0,
 			     (1 << AHB_RESET_SPI0_SHIFT));
 }

 static void spi0_init(void)
 {
 	unsigned int pin_function = SUNXI_GPC_SPI0;

 	if (IS_ENABLED(CONFIG_MACH_SUN50I))
 		pin_function = SUN50I_GPC_SPI0;

 	spi0_pinmux_setup(pin_function);
 	spi0_enable_clock();
 }

 static void spi0_deinit(void)
 {
 	/* New SoCs can disable pins, older could only set them as input */
 	unsigned int pin_function = SUNXI_GPIO_INPUT;

 	if (is_sun6i_gen_spi())
 		pin_function = SUNXI_GPIO_DISABLE;

 	spi0_disable_clock();
 	spi0_pinmux_setup(pin_function);
 }

 /*****************************************************************************/

 #define SPI_READ_MAX_SIZE 60 /* FIFO size, minus 4 bytes of the header */

 static void sunxi_spi0_read_data(u8 *buf, u32 addr, u32 bufsize,
 				 ulong spi_ctl_reg,
 				 ulong spi_ctl_xch_bitmask,
 				 ulong spi_fifo_reg,
 				 ulong spi_tx_reg,
 				 ulong spi_rx_reg,
 				 ulong spi_bc_reg,
 				 ulong spi_tc_reg,
 				 ulong spi_bcc_reg)
 {
 	writel(4 + bufsize, spi_bc_reg); /* Burst counter (total bytes) */
 	writel(4, spi_tc_reg);           /* Transfer counter (bytes to send) */
 	if (spi_bcc_reg)
 		writel(4, spi_bcc_reg);  /* SUN6I also needs this */

 	/* Send the Read Data Bytes (03h) command header */
 	writeb(0x03, spi_tx_reg);
 	writeb((u8)(addr >> 16), spi_tx_reg);
 	writeb((u8)(addr >> 8), spi_tx_reg);
 	writeb((u8)(addr), spi_tx_reg);

 	/* Start the data transfer */
 	setbits_le32(spi_ctl_reg, spi_ctl_xch_bitmask);

 	/* Wait until everything is received in the RX FIFO */
 	while ((readl(spi_fifo_reg) & 0x7F) < 4 + bufsize)
 		;

 	/* Skip 4 bytes */
 	readl(spi_rx_reg);

 	/* Read the data */
 	while (bufsize-- > 0)
 		*buf++ = readb(spi_rx_reg);

 	/* tSHSL time is up to 100 ns in various SPI flash datasheets */
 	udelay(1);
 }

 static void spi0_read_data(void *buf, u32 addr, u32 len)
 {
 	u8 *buf8 = buf;
 	u32 chunk_len;
 	uintptr_t base = spi0_base_address();

 	while (len > 0) {
 		chunk_len = len;
 		if (chunk_len > SPI_READ_MAX_SIZE)
 			chunk_len = SPI_READ_MAX_SIZE;

 		if (is_sun6i_gen_spi()) {
 			sunxi_spi0_read_data(buf8, addr, chunk_len,
 					     base + SUN6I_SPI0_TCR,
 					     SUN6I_TCR_XCH,
 					     base + SUN6I_SPI0_FIFO_STA,
 					     base + SUN6I_SPI0_TXD,
 					     base + SUN6I_SPI0_RXD,
 					     base + SUN6I_SPI0_MBC,
 					     base + SUN6I_SPI0_MTC,
 					     base + SUN6I_SPI0_BCC);
 		} else {
 			sunxi_spi0_read_data(buf8, addr, chunk_len,
 					     base + SUN4I_SPI0_CTL,
 					     SUN4I_CTL_XCH,
 					     base + SUN4I_SPI0_FIFO_STA,
 					     base + SUN4I_SPI0_TX,
 					     base + SUN4I_SPI0_RX,
 					     base + SUN4I_SPI0_BC,
 					     base + SUN4I_SPI0_TC,
 					     0);
 		}

 		len  -= chunk_len;
 		buf8 += chunk_len;
 		addr += chunk_len;
 	}
 }

 static ulong spi_load_read(struct spl_load_info *load, ulong sector,
 			   ulong count, void *buf)
 {
 	spi0_read_data(buf, sector, count);

 	return count;
 }

 /*****************************************************************************/

 static int spl_spi_load_image(struct spl_image_info *spl_image,
 			      struct spl_boot_device *bootdev)
 {
 	int ret = 0;
 	struct image_header *header;
 	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);

 	spi0_init();

 	spi0_read_data((void *)header, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40);

         if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
 		image_get_magic(header) == FDT_MAGIC) {
 		struct spl_load_info load;

 		debug("Found FIT image\n");
 		load.dev = NULL;
 		load.priv = NULL;
 		load.filename = NULL;
 		load.bl_len = 1;
 		load.read = spi_load_read;
 		ret = spl_load_simple_fit(spl_image, &load,
 					  CONFIG_SYS_SPI_U_BOOT_OFFS, header);
 	} else {
 		ret = spl_parse_image_header(spl_image, header);
 		if (ret)
 			return ret;

 		spi0_read_data((void *)spl_image->load_addr,
 			       CONFIG_SYS_SPI_U_BOOT_OFFS, spl_image->size);
 	}

 	spi0_deinit();

 	return ret;
 }
 /* Use priorty 0 to override the default if it happens to be linked in */
 SPL_LOAD_IMAGE_METHOD("sunxi SPI", 0, BOOT_DEVICE_SPI, spl_spi_load_image);
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Copyright (C) 2016 Siarhei Siamashka <siarhei.siamashka@gmail.com>
	*/

	#include <common.h>
	#include <spl.h>
	#include <asm/gpio.h>
	#include <asm/io.h>
	#include <linux/libfdt.h>

	#ifdef CONFIG_SPL_OS_BOOT
	#error CONFIG_SPL_OS_BOOT is not supported yet
	#endif

	/*
	* This is a very simple U-Boot image loading implementation, trying to
	* replicate what the boot ROM is doing when loading the SPL. Because we
	* know the exact pins where the SPI Flash is connected and also know
	* that the Read Data Bytes (03h) command is supported, the hardware
	* configuration is very simple and we don't need the extra flexibility
	* of the SPI framework. Moreover, we rely on the default settings of
	* the SPI controler hardware registers and only adjust what needs to
	* be changed. This is good for the code size and this implementation
	* adds less than 400 bytes to the SPL.
	*
	* There are two variants of the SPI controller in Allwinner SoCs:
	* A10/A13/A20 (sun4i variant) and everything else (sun6i variant).
	* Both of them are supported.
	*
	* The pin mixing part is SoC specific and only A10/A13/A20/H3/A64 are
	* supported at the moment.
	*/

	/*****************************************************************************/
	/* SUN4I variant of the SPI controller */
	/*****************************************************************************/

	#define SUN4I_SPI0_CCTL 0x1C
	#define SUN4I_SPI0_CTL 0x08
	#define SUN4I_SPI0_RX 0x00
	#define SUN4I_SPI0_TX 0x04
	#define SUN4I_SPI0_FIFO_STA 0x28
	#define SUN4I_SPI0_BC 0x20
	#define SUN4I_SPI0_TC 0x24

	#define SUN4I_CTL_ENABLE BIT(0)
	#define SUN4I_CTL_MASTER BIT(1)
	#define SUN4I_CTL_TF_RST BIT(8)
	#define SUN4I_CTL_RF_RST BIT(9)
	#define SUN4I_CTL_XCH BIT(10)

	/*****************************************************************************/
	/* SUN6I variant of the SPI controller */
	/*****************************************************************************/

	#define SUN6I_SPI0_CCTL 0x24
	#define SUN6I_SPI0_GCR 0x04
	#define SUN6I_SPI0_TCR 0x08
	#define SUN6I_SPI0_FIFO_STA 0x1C
	#define SUN6I_SPI0_MBC 0x30
	#define SUN6I_SPI0_MTC 0x34
	#define SUN6I_SPI0_BCC 0x38
	#define SUN6I_SPI0_TXD 0x200
	#define SUN6I_SPI0_RXD 0x300

	#define SUN6I_CTL_ENABLE BIT(0)
	#define SUN6I_CTL_MASTER BIT(1)
	#define SUN6I_CTL_SRST BIT(31)
	#define SUN6I_TCR_XCH BIT(31)

	/*****************************************************************************/

	#define CCM_AHB_GATING0 (0x01C20000 + 0x60)
	#define CCM_SPI0_CLK (0x01C20000 + 0xA0)
	#define SUN6I_BUS_SOFT_RST_REG0 (0x01C20000 + 0x2C0)

	#define AHB_RESET_SPI0_SHIFT 20
	#define AHB_GATE_OFFSET_SPI0 20

	#define SPI0_CLK_DIV_BY_2 0x1000
	#define SPI0_CLK_DIV_BY_4 0x1001

	/*****************************************************************************/

	/*
	* Allwinner A10/A20 SoCs were using pins PC0,PC1,PC2,PC23 for booting
	* from SPI Flash, everything else is using pins PC0,PC1,PC2,PC3.
	*/
	static void spi0_pinmux_setup(unsigned int pin_function)
	{
	unsigned int pin;

	for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(2); pin++)
	sunxi_gpio_set_cfgpin(pin, pin_function);

	if (IS_ENABLED(CONFIG_MACH_SUN4I) \|\| IS_ENABLED(CONFIG_MACH_SUN7I))
	sunxi_gpio_set_cfgpin(SUNXI_GPC(23), pin_function);
	else
	sunxi_gpio_set_cfgpin(SUNXI_GPC(3), pin_function);
	}

	static bool is_sun6i_gen_spi(void)
	{
	return IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I);
	}

	static uintptr_t spi0_base_address(void)
	{
	if (!is_sun6i_gen_spi())
	return 0x01C05000;

	return 0x01C68000;
	}

	/*
	* Setup 6 MHz from OSC24M (because the BROM is doing the same).
	*/
	static void spi0_enable_clock(void)
	{
	uintptr_t base = spi0_base_address();

	/* Deassert SPI0 reset on SUN6I */
	if (is_sun6i_gen_spi())
	setbits_le32(SUN6I_BUS_SOFT_RST_REG0,
	(1 << AHB_RESET_SPI0_SHIFT));

	/* Open the SPI0 gate */
	setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));

	/* Divide by 4 */
	writel(SPI0_CLK_DIV_BY_4, base + (is_sun6i_gen_spi() ?
	SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL));
	/* 24MHz from OSC24M */
	writel((1 << 31), CCM_SPI0_CLK);

	if (is_sun6i_gen_spi()) {
	/* Enable SPI in the master mode and do a soft reset */
	setbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER \|
	SUN6I_CTL_ENABLE \| SUN6I_CTL_SRST);
	/* Wait for completion */
	while (readl(base + SUN6I_SPI0_GCR) & SUN6I_CTL_SRST)
	;
	} else {
	/* Enable SPI in the master mode and reset FIFO */
	setbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER \|
	SUN4I_CTL_ENABLE \|
	SUN4I_CTL_TF_RST \|
	SUN4I_CTL_RF_RST);
	}
	}

	static void spi0_disable_clock(void)
	{
	uintptr_t base = spi0_base_address();

	/* Disable the SPI0 controller */
	if (is_sun6i_gen_spi())
	clrbits_le32(base + SUN6I_SPI0_GCR, SUN6I_CTL_MASTER \|
	SUN6I_CTL_ENABLE);
	else
	clrbits_le32(base + SUN4I_SPI0_CTL, SUN4I_CTL_MASTER \|
	SUN4I_CTL_ENABLE);

	/* Disable the SPI0 clock */
	writel(0, CCM_SPI0_CLK);

	/* Close the SPI0 gate */
	clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0));

	/* Assert SPI0 reset on SUN6I */
	if (is_sun6i_gen_spi())
	clrbits_le32(SUN6I_BUS_SOFT_RST_REG0,
	(1 << AHB_RESET_SPI0_SHIFT));
	}

	static void spi0_init(void)
	{
	unsigned int pin_function = SUNXI_GPC_SPI0;

	if (IS_ENABLED(CONFIG_MACH_SUN50I))
	pin_function = SUN50I_GPC_SPI0;

	spi0_pinmux_setup(pin_function);
	spi0_enable_clock();
	}

	static void spi0_deinit(void)
	{
	/* New SoCs can disable pins, older could only set them as input */
	unsigned int pin_function = SUNXI_GPIO_INPUT;

	if (is_sun6i_gen_spi())
	pin_function = SUNXI_GPIO_DISABLE;

	spi0_disable_clock();
	spi0_pinmux_setup(pin_function);
	}

	/*****************************************************************************/

	#define SPI_READ_MAX_SIZE 60 /* FIFO size, minus 4 bytes of the header */

	static void sunxi_spi0_read_data(u8 *buf, u32 addr, u32 bufsize,
	ulong spi_ctl_reg,
	ulong spi_ctl_xch_bitmask,
	ulong spi_fifo_reg,
	ulong spi_tx_reg,
	ulong spi_rx_reg,
	ulong spi_bc_reg,
	ulong spi_tc_reg,
	ulong spi_bcc_reg)
	{
	writel(4 + bufsize, spi_bc_reg); /* Burst counter (total bytes) */
	writel(4, spi_tc_reg); /* Transfer counter (bytes to send) */
	if (spi_bcc_reg)
	writel(4, spi_bcc_reg); /* SUN6I also needs this */

	/* Send the Read Data Bytes (03h) command header */
	writeb(0x03, spi_tx_reg);
	writeb((u8)(addr >> 16), spi_tx_reg);
	writeb((u8)(addr >> 8), spi_tx_reg);
	writeb((u8)(addr), spi_tx_reg);

	/* Start the data transfer */
	setbits_le32(spi_ctl_reg, spi_ctl_xch_bitmask);

	/* Wait until everything is received in the RX FIFO */
	while ((readl(spi_fifo_reg) & 0x7F) < 4 + bufsize)
	;

	/* Skip 4 bytes */
	readl(spi_rx_reg);

	/* Read the data */
	while (bufsize-- > 0)
	*buf++ = readb(spi_rx_reg);

	/* tSHSL time is up to 100 ns in various SPI flash datasheets */
	udelay(1);
	}

	static void spi0_read_data(void *buf, u32 addr, u32 len)
	{
	u8 *buf8 = buf;
	u32 chunk_len;
	uintptr_t base = spi0_base_address();

	while (len > 0) {
	chunk_len = len;
	if (chunk_len > SPI_READ_MAX_SIZE)
	chunk_len = SPI_READ_MAX_SIZE;

	if (is_sun6i_gen_spi()) {
	sunxi_spi0_read_data(buf8, addr, chunk_len,
	base + SUN6I_SPI0_TCR,
	SUN6I_TCR_XCH,
	base + SUN6I_SPI0_FIFO_STA,
	base + SUN6I_SPI0_TXD,
	base + SUN6I_SPI0_RXD,
	base + SUN6I_SPI0_MBC,
	base + SUN6I_SPI0_MTC,
	base + SUN6I_SPI0_BCC);
	} else {
	sunxi_spi0_read_data(buf8, addr, chunk_len,
	base + SUN4I_SPI0_CTL,
	SUN4I_CTL_XCH,
	base + SUN4I_SPI0_FIFO_STA,
	base + SUN4I_SPI0_TX,
	base + SUN4I_SPI0_RX,
	base + SUN4I_SPI0_BC,
	base + SUN4I_SPI0_TC,
	0);
	}

	len -= chunk_len;
	buf8 += chunk_len;
	addr += chunk_len;
	}
	}

	static ulong spi_load_read(struct spl_load_info *load, ulong sector,
	ulong count, void *buf)
	{
	spi0_read_data(buf, sector, count);

	return count;
	}

	/*****************************************************************************/

	static int spl_spi_load_image(struct spl_image_info *spl_image,
	struct spl_boot_device *bootdev)
	{
	int ret = 0;
	struct image_header *header;
	header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);

	spi0_init();

	spi0_read_data((void *)header, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40);

	if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
	image_get_magic(header) == FDT_MAGIC) {
	struct spl_load_info load;

	debug("Found FIT image\n");
	load.dev = NULL;
	load.priv = NULL;
	load.filename = NULL;
	load.bl_len = 1;
	load.read = spi_load_read;
	ret = spl_load_simple_fit(spl_image, &load,
	CONFIG_SYS_SPI_U_BOOT_OFFS, header);
	} else {
	ret = spl_parse_image_header(spl_image, header);
	if (ret)
	return ret;

	spi0_read_data((void *)spl_image->load_addr,
	CONFIG_SYS_SPI_U_BOOT_OFFS, spl_image->size);
	}

	spi0_deinit();

	return ret;
	}
	/* Use priorty 0 to override the default if it happens to be linked in */
	SPL_LOAD_IMAGE_METHOD("sunxi SPI", 0, BOOT_DEVICE_SPI, spl_spi_load_image);