include/configs/aristainetos-common.h - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2015
  * (C) Copyright 2014
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
  * Based on:
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6Q SabreSD board.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __ARISTAINETOS_COMMON_CONFIG_H
 #define __ARISTAINETOS_COMMON_CONFIG_H

 #include "mx6_common.h"

 #define CONFIG_MACH_TYPE	4501
 #define CONFIG_MMCROOT		"/dev/mmcblk0p1"

 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(64 * SZ_1M)

 #define CONFIG_MXC_UART

 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0

 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		0

 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL

 #define CONFIG_SPI_FLASH_MTD
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_SPEED		20000000
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=u-boot.scr\0" \
 	"fit_file=/boot/system.itb\0" \
 	"loadaddr=0x12000000\0" \
 	"fit_addr_r=0x14000000\0" \
 	"uboot=/boot/u-boot.imx\0" \
 	"uboot_sz=d0000\0" \
 	"rescue_sys_addr=f0000\0" \
 	"rescue_sys_length=f10000\0" \
 	"panel=lb07wv8\0" \
 	"splashpos=m,m\0" \
 	"console=" CONSOLE_DEV "\0" \
 	"fdt_high=0xffffffff\0"	  \
 	"initrd_high=0xffffffff\0" \
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
 	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
 		"default ${board_type}\0" \
 	"get_env=mw ${loadaddr} 0 0x20000;" \
 		"mmc rescan;" \
 		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
 		"env import -t ${loadaddr}\0" \
 	"default_env=mw ${loadaddr} 0 0x20000;" \
 		"env export -t ${loadaddr} serial# ethaddr eth1addr " \
 		"board_type panel;" \
 		"env default -a;" \
 		"env import -t ${loadaddr}\0" \
 	"loadbootscript=" \
 		"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
 	"mmcpart=1\0" \
 	"mmcdev=0\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs addmtd addmisc set_fit_default;" \
 		"bootm ${fit_addr_r}\0" \
 	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
 		"${fit_file}\0" \
 	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
 		"${uboot}\0" \
 	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
 		"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
 		"setexpr uboot_maxsize ${uboot_sz} - 400;" \
 		"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
 		"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
 		"sf write ${loadaddr} 400 ${filesize};" \
 		"sf read ${cmp_buf} 400 ${uboot_sz};" \
 		"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
 	"ubiboot=echo Booting from ubi ...; " \
 		"run ubiargs addmtd addmisc set_fit_default;" \
 		"bootm ${fit_addr_r}\0" \
 	"rescueargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/ram rw\0 " \
 	"rescueboot=echo Booting rescue system from NOR ...; " \
 		"run rescueargs addmtd addmisc set_fit_default;" \
 		"bootm ${fit_addr_r}\0" \
 	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
 		"${rescue_sys_length}; imi ${fit_addr_r}\0" \
 	CONFIG_EXTRA_ENV_BOARD_SETTINGS

 #define CONFIG_BOOTCOMMAND \
 	"mmc dev ${mmcdev};" \
 	"if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
 			"if run mmc_load_fit; then " \
 				"run mmcboot; " \
 			"else " \
 				"if run ubifs_load_fit; then " \
 					"run ubiboot; " \
 				"else " \
 					"if run rescue_load_fit; then " \
 						"run rescueboot; " \
 					"else " \
 						"echo RESCUE SYSTEM BOOT " \
 							"FAILURE;" \
 					"fi; " \
 				"fi; " \
 			"fi; " \
 		"fi; " \
 	"else " \
 		"if run ubifs_load_fit; then " \
 			"run ubiboot; " \
 		"else " \
 			"if run rescue_load_fit; then " \
 				"run rescueboot; " \
 			"else " \
 				"echo RESCUE SYSTEM BOOT FAILURE;" \
 			"fi; " \
 		"fi; " \
 	"fi"

 #define CONFIG_ARP_TIMEOUT		200UL

 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)

 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x100000)
 #define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000

 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* Environment organization */
 #define CONFIG_ENV_SIZE			(12 * 1024)
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
 #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SECT_SIZE		(0x010000)
 #define CONFIG_ENV_OFFSET		(0x0d0000)
 #define CONFIG_ENV_OFFSET_REDUND	(0x0e0000)

 #define CONFIG_SYS_FSL_USDHC_NUM	2

 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		0x7f
 #define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x00} }

 /* NAND stuff */
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NAND_TRIMFFS
 #define CONFIG_NAND_MXS
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION

 /* DMA stuff, needed for GPMI/MXS NAND support */
 #define CONFIG_APBH_DMA
 #define CONFIG_APBH_DMA_BURST
 #define CONFIG_APBH_DMA_BURST8

 /* RTC */
 #define CONFIG_SYS_I2C_RTC_ADDR	0x68
 #define CONFIG_SYS_RTC_BUS_NUM	2
 #define CONFIG_RTC_M41T11

 /* USB Configs */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0

 /* UBI support */
 #define CONFIG_LZO
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_RBTREE
 #define CONFIG_CMD_UBIFS

 #define CONFIG_HW_WATCHDOG
 #define CONFIG_IMX_WATCHDOG

 /* Framebuffer */
 #define CONFIG_VIDEO_IPUV3
 /* check this console not needed, after test remove it */
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IPUV3_CLK 198000000
 #define CONFIG_IMX_VIDEO_SKIP

 #define CONFIG_PWM_IMX
 #define CONFIG_IMX6_PWM_PER_CLK	66000000

 #endif /* __ARISTAINETOS_COMMON_CONFIG_H */
	/*
	* (C) Copyright 2015
	* (C) Copyright 2014
	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	*
	* Based on:
	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	*
	* Configuration settings for the Freescale i.MX6Q SabreSD board.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/
	#ifndef __ARISTAINETOS_COMMON_CONFIG_H
	#define __ARISTAINETOS_COMMON_CONFIG_H

	#include "mx6_common.h"

	#define CONFIG_MACH_TYPE 4501
	#define CONFIG_MMCROOT "/dev/mmcblk0p1"

	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)

	#define CONFIG_MXC_UART

	/* MMC Configs */
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0

	#define CONFIG_FEC_MXC
	#define CONFIG_MII
	#define IMX_FEC_BASE ENET_BASE_ADDR
	#define CONFIG_ETHPRIME "FEC"
	#define CONFIG_FEC_MXC_PHYADDR 0

	#define CONFIG_PHYLIB
	#define CONFIG_PHY_MICREL

	#define CONFIG_SPI_FLASH_MTD
	#define CONFIG_MXC_SPI
	#define CONFIG_SF_DEFAULT_SPEED 20000000
	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=u-boot.scr\0" \
	"fit_file=/boot/system.itb\0" \
	"loadaddr=0x12000000\0" \
	"fit_addr_r=0x14000000\0" \
	"uboot=/boot/u-boot.imx\0" \
	"uboot_sz=d0000\0" \
	"rescue_sys_addr=f0000\0" \
	"rescue_sys_length=f10000\0" \
	"panel=lb07wv8\0" \
	"splashpos=m,m\0" \
	"console=" CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
	"default ${board_type}\0" \
	"get_env=mw ${loadaddr} 0 0x20000;" \
	"mmc rescan;" \
	"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
	"env import -t ${loadaddr}\0" \
	"default_env=mw ${loadaddr} 0 0x20000;" \
	"env export -t ${loadaddr} serial# ethaddr eth1addr " \
	"board_type panel;" \
	"env default -a;" \
	"env import -t ${loadaddr}\0" \
	"loadbootscript=" \
	"ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
	"source\0" \
	"mmcpart=1\0" \
	"mmcdev=0\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	"root=${mmcroot}\0" \
	"mmcboot=echo Booting from mmc ...; " \
	"run mmcargs addmtd addmisc set_fit_default;" \
	"bootm ${fit_addr_r}\0" \
	"mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
	"${fit_file}\0" \
	"mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
	"${uboot}\0" \
	"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
	"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
	"setexpr uboot_maxsize ${uboot_sz} - 400;" \
	"mw.b ${cmp_buf} 0x00 ${uboot_sz};" \
	"run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
	"sf write ${loadaddr} 400 ${filesize};" \
	"sf read ${cmp_buf} 400 ${uboot_sz};" \
	"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
	"ubiboot=echo Booting from ubi ...; " \
	"run ubiargs addmtd addmisc set_fit_default;" \
	"bootm ${fit_addr_r}\0" \
	"rescueargs=setenv bootargs console=${console},${baudrate} " \
	"root=/dev/ram rw\0 " \
	"rescueboot=echo Booting rescue system from NOR ...; " \
	"run rescueargs addmtd addmisc set_fit_default;" \
	"bootm ${fit_addr_r}\0" \
	"rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
	"${rescue_sys_length}; imi ${fit_addr_r}\0" \
	CONFIG_EXTRA_ENV_BOARD_SETTINGS

	#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
	"if run loadbootscript; then " \
	"run bootscript; " \
	"else " \
	"if run mmc_load_fit; then " \
	"run mmcboot; " \
	"else " \
	"if run ubifs_load_fit; then " \
	"run ubiboot; " \
	"else " \
	"if run rescue_load_fit; then " \
	"run rescueboot; " \
	"else " \
	"echo RESCUE SYSTEM BOOT " \
	"FAILURE;" \
	"fi; " \
	"fi; " \
	"fi; " \
	"fi; " \
	"else " \
	"if run ubifs_load_fit; then " \
	"run ubiboot; " \
	"else " \
	"if run rescue_load_fit; then " \
	"run rescueboot; " \
	"else " \
	"echo RESCUE SYSTEM BOOT FAILURE;" \
	"fi; " \
	"fi; " \
	"fi"

	#define CONFIG_ARP_TIMEOUT 200UL

	/* Print Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)

	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000

	/* Physical Memory Map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* Environment organization */
	#define CONFIG_ENV_SIZE (12 * 1024)
	#define CONFIG_ENV_IS_IN_SPI_FLASH
	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	#define CONFIG_ENV_SECT_SIZE (0x010000)
	#define CONFIG_ENV_OFFSET (0x0d0000)
	#define CONFIG_ENV_OFFSET_REDUND (0x0e0000)

	#define CONFIG_SYS_FSL_USDHC_NUM 2

	/* I2C */
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_SYS_I2C_SLAVE 0x7f
	#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }

	/* NAND stuff */
	#define CONFIG_CMD_NAND
	#define CONFIG_CMD_NAND_TRIMFFS
	#define CONFIG_NAND_MXS
	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE 0x40000000
	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	#define CONFIG_SYS_NAND_ONFI_DETECTION

	/* DMA stuff, needed for GPMI/MXS NAND support */
	#define CONFIG_APBH_DMA
	#define CONFIG_APBH_DMA_BURST
	#define CONFIG_APBH_DMA_BURST8

	/* RTC */
	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	#define CONFIG_SYS_RTC_BUS_NUM 2
	#define CONFIG_RTC_M41T11

	/* USB Configs */
	#define CONFIG_USB_EHCI
	#define CONFIG_USB_EHCI_MX6
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0

	/* UBI support */
	#define CONFIG_LZO
	#define CONFIG_CMD_MTDPARTS
	#define CONFIG_MTD_PARTITIONS
	#define CONFIG_MTD_DEVICE
	#define CONFIG_RBTREE
	#define CONFIG_CMD_UBIFS

	#define CONFIG_HW_WATCHDOG
	#define CONFIG_IMX_WATCHDOG

	/* Framebuffer */
	#define CONFIG_VIDEO_IPUV3
	/* check this console not needed, after test remove it */
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_SPLASH_SCREEN_ALIGN
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_VIDEO_BMP_LOGO
	#define CONFIG_IPUV3_CLK 198000000
	#define CONFIG_IMX_VIDEO_SKIP

	#define CONFIG_PWM_IMX
	#define CONFIG_IMX6_PWM_PER_CLK 66000000

	#endif /* __ARISTAINETOS_COMMON_CONFIG_H */