| /* |
| * (C) Copyright 2010 |
| * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <errno.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/ppc4xx-gpio.h> |
| |
| #include "405ep.h" |
| #include <gdsys_fpga.h> |
| |
| #include "../common/osd.h" |
| #include "../common/mclink.h" |
| |
| #include <i2c.h> |
| #include <pca953x.h> |
| #include <pca9698.h> |
| |
| #include <miiphy.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) |
| #define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) |
| #define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) |
| |
| #define MAX_MUX_CHANNELS 2 |
| |
| enum { |
| UNITTYPE_MAIN_SERVER = 0, |
| UNITTYPE_MAIN_USER = 1, |
| UNITTYPE_VIDEO_SERVER = 2, |
| UNITTYPE_VIDEO_USER = 3, |
| }; |
| |
| enum { |
| HWVER_100 = 0, |
| HWVER_104 = 1, |
| HWVER_110 = 2, |
| HWVER_120 = 3, |
| HWVER_200 = 4, |
| HWVER_210 = 5, |
| HWVER_220 = 6, |
| HWVER_230 = 7, |
| }; |
| |
| enum { |
| FPGA_HWVER_200 = 0, |
| FPGA_HWVER_210 = 1, |
| }; |
| |
| enum { |
| COMPRESSION_NONE = 0, |
| COMPRESSION_TYPE1_DELTA = 1, |
| COMPRESSION_TYPE1_TYPE2_DELTA = 3, |
| }; |
| |
| enum { |
| AUDIO_NONE = 0, |
| AUDIO_TX = 1, |
| AUDIO_RX = 2, |
| AUDIO_RXTX = 3, |
| }; |
| |
| enum { |
| SYSCLK_147456 = 0, |
| }; |
| |
| enum { |
| RAM_DDR2_32 = 0, |
| RAM_DDR3_32 = 1, |
| }; |
| |
| enum { |
| CARRIER_SPEED_1G = 0, |
| CARRIER_SPEED_2_5G = 1, |
| }; |
| |
| enum { |
| MCFPGA_DONE = 1 << 0, |
| MCFPGA_INIT_N = 1 << 1, |
| MCFPGA_PROGRAM_N = 1 << 2, |
| MCFPGA_UPDATE_ENABLE_N = 1 << 3, |
| MCFPGA_RESET_N = 1 << 4, |
| }; |
| |
| enum { |
| GPIO_MDC = 1 << 14, |
| GPIO_MDIO = 1 << 15, |
| }; |
| |
| unsigned int mclink_fpgacount; |
| struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; |
| |
| static int setup_88e1518(const char *bus, unsigned char addr); |
| static int verify_88e1518(const char *bus, unsigned char addr); |
| |
| int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data) |
| { |
| int res; |
| |
| switch (fpga) { |
| case 0: |
| out_le16(reg, data); |
| break; |
| default: |
| res = mclink_send(fpga - 1, regoff, data); |
| if (res < 0) { |
| printf("mclink_send reg %02lx data %04x returned %d\n", |
| regoff, data, res); |
| return res; |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data) |
| { |
| int res; |
| |
| switch (fpga) { |
| case 0: |
| *data = in_le16(reg); |
| break; |
| default: |
| if (fpga > mclink_fpgacount) |
| return -EINVAL; |
| res = mclink_receive(fpga - 1, regoff, data); |
| if (res < 0) { |
| printf("mclink_receive reg %02lx returned %d\n", |
| regoff, res); |
| return res; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Check Board Identity: |
| */ |
| int checkboard(void) |
| { |
| char *s = getenv("serial#"); |
| |
| puts("Board: "); |
| |
| puts("IoCon"); |
| |
| if (s != NULL) { |
| puts(", serial# "); |
| puts(s); |
| } |
| |
| puts("\n"); |
| |
| return 0; |
| } |
| |
| static void print_fpga_info(unsigned int fpga, bool rgmii2_present) |
| { |
| u16 versions; |
| u16 fpga_version; |
| u16 fpga_features; |
| unsigned unit_type; |
| unsigned hardware_version; |
| unsigned feature_compression; |
| unsigned feature_osd; |
| unsigned feature_audio; |
| unsigned feature_sysclock; |
| unsigned feature_ramconfig; |
| unsigned feature_carrier_speed; |
| unsigned feature_carriers; |
| unsigned feature_video_channels; |
| |
| int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; |
| |
| FPGA_GET_REG(0, versions, &versions); |
| FPGA_GET_REG(0, fpga_version, &fpga_version); |
| FPGA_GET_REG(0, fpga_features, &fpga_features); |
| |
| unit_type = (versions & 0xf000) >> 12; |
| feature_compression = (fpga_features & 0xe000) >> 13; |
| feature_osd = fpga_features & (1<<11); |
| feature_audio = (fpga_features & 0x0600) >> 9; |
| feature_sysclock = (fpga_features & 0x0180) >> 7; |
| feature_ramconfig = (fpga_features & 0x0060) >> 5; |
| feature_carrier_speed = fpga_features & (1<<4); |
| feature_carriers = (fpga_features & 0x000c) >> 2; |
| feature_video_channels = fpga_features & 0x0003; |
| |
| if (legacy) |
| printf("legacy "); |
| |
| switch (unit_type) { |
| case UNITTYPE_MAIN_USER: |
| printf("Mainchannel"); |
| break; |
| |
| case UNITTYPE_VIDEO_USER: |
| printf("Videochannel"); |
| break; |
| |
| default: |
| printf("UnitType %d(not supported)", unit_type); |
| break; |
| } |
| |
| if (unit_type == UNITTYPE_MAIN_USER) { |
| if (legacy) |
| hardware_version = |
| (in_le16((void *)LATCH2_BASE)>>8) & 0x0f; |
| else |
| hardware_version = |
| (!!pca9698_get_value(0x20, 24) << 0) |
| | (!!pca9698_get_value(0x20, 25) << 1) |
| | (!!pca9698_get_value(0x20, 26) << 2) |
| | (!!pca9698_get_value(0x20, 27) << 3); |
| switch (hardware_version) { |
| case HWVER_100: |
| printf(" HW-Ver 1.00,"); |
| break; |
| |
| case HWVER_104: |
| printf(" HW-Ver 1.04,"); |
| break; |
| |
| case HWVER_110: |
| printf(" HW-Ver 1.10,"); |
| break; |
| |
| case HWVER_120: |
| printf(" HW-Ver 1.20-1.21,"); |
| break; |
| |
| case HWVER_200: |
| printf(" HW-Ver 2.00,"); |
| break; |
| |
| case HWVER_210: |
| printf(" HW-Ver 2.10,"); |
| break; |
| |
| case HWVER_220: |
| printf(" HW-Ver 2.20,"); |
| break; |
| |
| case HWVER_230: |
| printf(" HW-Ver 2.30,"); |
| break; |
| |
| default: |
| printf(" HW-Ver %d(not supported),", |
| hardware_version); |
| break; |
| } |
| if (rgmii2_present) |
| printf(" RGMII2,"); |
| } |
| |
| if (unit_type == UNITTYPE_VIDEO_USER) { |
| hardware_version = versions & 0x000f; |
| switch (hardware_version) { |
| case FPGA_HWVER_200: |
| printf(" HW-Ver 2.00,"); |
| break; |
| |
| case FPGA_HWVER_210: |
| printf(" HW-Ver 2.10,"); |
| break; |
| |
| default: |
| printf(" HW-Ver %d(not supported),", |
| hardware_version); |
| break; |
| } |
| } |
| |
| printf(" FPGA V %d.%02d\n features:", |
| fpga_version / 100, fpga_version % 100); |
| |
| |
| switch (feature_compression) { |
| case COMPRESSION_NONE: |
| printf(" no compression"); |
| break; |
| |
| case COMPRESSION_TYPE1_DELTA: |
| printf(" type1-deltacompression"); |
| break; |
| |
| case COMPRESSION_TYPE1_TYPE2_DELTA: |
| printf(" type1-deltacompression, type2-inlinecompression"); |
| break; |
| |
| default: |
| printf(" compression %d(not supported)", feature_compression); |
| break; |
| } |
| |
| printf(", %sosd", feature_osd ? "" : "no "); |
| |
| switch (feature_audio) { |
| case AUDIO_NONE: |
| printf(", no audio"); |
| break; |
| |
| case AUDIO_TX: |
| printf(", audio tx"); |
| break; |
| |
| case AUDIO_RX: |
| printf(", audio rx"); |
| break; |
| |
| case AUDIO_RXTX: |
| printf(", audio rx+tx"); |
| break; |
| |
| default: |
| printf(", audio %d(not supported)", feature_audio); |
| break; |
| } |
| |
| puts(",\n "); |
| |
| switch (feature_sysclock) { |
| case SYSCLK_147456: |
| printf("clock 147.456 MHz"); |
| break; |
| |
| default: |
| printf("clock %d(not supported)", feature_sysclock); |
| break; |
| } |
| |
| switch (feature_ramconfig) { |
| case RAM_DDR2_32: |
| printf(", RAM 32 bit DDR2"); |
| break; |
| |
| case RAM_DDR3_32: |
| printf(", RAM 32 bit DDR3"); |
| break; |
| |
| default: |
| printf(", RAM %d(not supported)", feature_ramconfig); |
| break; |
| } |
| |
| printf(", %d carrier(s) %s", feature_carriers, |
| feature_carrier_speed ? "2.5Gbit/s" : "1Gbit/s"); |
| |
| printf(", %d video channel(s)\n", feature_video_channels); |
| } |
| |
| int last_stage_init(void) |
| { |
| int slaves; |
| unsigned int k; |
| unsigned int mux_ch; |
| unsigned char mclink_controllers[] = { 0x24, 0x25, 0x26 }; |
| int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; |
| u16 fpga_features; |
| int feature_carrier_speed = fpga_features & (1<<4); |
| bool ch0_rgmii2_present = false; |
| |
| FPGA_GET_REG(0, fpga_features, &fpga_features); |
| |
| if (!legacy) |
| ch0_rgmii2_present = !pca9698_get_value(0x20, 30); |
| |
| print_fpga_info(0, ch0_rgmii2_present); |
| osd_probe(0); |
| |
| /* wait for FPGA done */ |
| for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) { |
| unsigned int ctr = 0; |
| |
| if (i2c_probe(mclink_controllers[k])) |
| continue; |
| |
| while (!(pca953x_get_val(mclink_controllers[k]) |
| & MCFPGA_DONE)) { |
| udelay(100000); |
| if (ctr++ > 5) { |
| printf("no done for mclink_controller %d\n", k); |
| break; |
| } |
| } |
| } |
| |
| if (!legacy && (feature_carrier_speed == CARRIER_SPEED_1G)) { |
| miiphy_register(bb_miiphy_buses[0].name, bb_miiphy_read, |
| bb_miiphy_write); |
| for (mux_ch = 0; mux_ch < MAX_MUX_CHANNELS; ++mux_ch) { |
| if ((mux_ch == 1) && !ch0_rgmii2_present) |
| continue; |
| |
| if (!verify_88e1518(bb_miiphy_buses[0].name, mux_ch)) { |
| printf("Fixup 88e1518 erratum on %s phy %u\n", |
| bb_miiphy_buses[0].name, mux_ch); |
| setup_88e1518(bb_miiphy_buses[0].name, mux_ch); |
| } |
| } |
| } |
| |
| /* wait for slave-PLLs to be up and running */ |
| udelay(500000); |
| |
| mclink_fpgacount = CONFIG_SYS_MCLINK_MAX; |
| slaves = mclink_probe(); |
| mclink_fpgacount = 0; |
| |
| if (slaves <= 0) |
| return 0; |
| |
| mclink_fpgacount = slaves; |
| |
| for (k = 1; k <= slaves; ++k) { |
| FPGA_GET_REG(k, fpga_features, &fpga_features); |
| feature_carrier_speed = fpga_features & (1<<4); |
| |
| print_fpga_info(k, false); |
| osd_probe(k); |
| if (feature_carrier_speed == CARRIER_SPEED_1G) { |
| miiphy_register(bb_miiphy_buses[k].name, |
| bb_miiphy_read, bb_miiphy_write); |
| if (!verify_88e1518(bb_miiphy_buses[k].name, 0)) { |
| printf("Fixup 88e1518 erratum on %s\n", |
| bb_miiphy_buses[k].name); |
| setup_88e1518(bb_miiphy_buses[k].name, 0); |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * provide access to fpga gpios (for I2C bitbang) |
| * (these may look all too simple but make iocon.h much more readable) |
| */ |
| void fpga_gpio_set(unsigned int bus, int pin) |
| { |
| FPGA_SET_REG(bus, gpio.set, pin); |
| } |
| |
| void fpga_gpio_clear(unsigned int bus, int pin) |
| { |
| FPGA_SET_REG(bus, gpio.clear, pin); |
| } |
| |
| int fpga_gpio_get(unsigned int bus, int pin) |
| { |
| u16 val; |
| |
| FPGA_GET_REG(bus, gpio.read, &val); |
| |
| return val & pin; |
| } |
| |
| void gd405ep_init(void) |
| { |
| unsigned int k; |
| |
| if (i2c_probe(0x20)) { /* i2c_probe returns 0 on success */ |
| for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) |
| gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM; |
| } else { |
| pca9698_direction_output(0x20, 4, 1); |
| } |
| } |
| |
| void gd405ep_set_fpga_reset(unsigned state) |
| { |
| int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; |
| |
| if (legacy) { |
| if (state) { |
| out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); |
| out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); |
| } else { |
| out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); |
| out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); |
| } |
| } else { |
| pca9698_set_value(0x20, 4, state ? 0 : 1); |
| } |
| } |
| |
| void gd405ep_setup_hw(void) |
| { |
| /* |
| * set "startup-finished"-gpios |
| */ |
| gpio_write_bit(21, 0); |
| gpio_write_bit(22, 1); |
| } |
| |
| int gd405ep_get_fpga_done(unsigned fpga) |
| { |
| int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; |
| |
| if (legacy) |
| return in_le16((void *)LATCH2_BASE) |
| & CONFIG_SYS_FPGA_DONE(fpga); |
| else |
| return pca9698_get_value(0x20, 20); |
| } |
| |
| /* |
| * FPGA MII bitbang implementation |
| */ |
| |
| struct fpga_mii { |
| unsigned fpga; |
| int mdio; |
| } fpga_mii[] = { |
| { 0, 1}, |
| { 1, 1}, |
| { 2, 1}, |
| { 3, 1}, |
| }; |
| |
| static int mii_dummy_init(struct bb_miiphy_bus *bus) |
| { |
| return 0; |
| } |
| |
| static int mii_mdio_active(struct bb_miiphy_bus *bus) |
| { |
| struct fpga_mii *fpga_mii = bus->priv; |
| |
| if (fpga_mii->mdio) |
| FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); |
| else |
| FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO); |
| |
| return 0; |
| } |
| |
| static int mii_mdio_tristate(struct bb_miiphy_bus *bus) |
| { |
| struct fpga_mii *fpga_mii = bus->priv; |
| |
| FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); |
| |
| return 0; |
| } |
| |
| static int mii_set_mdio(struct bb_miiphy_bus *bus, int v) |
| { |
| struct fpga_mii *fpga_mii = bus->priv; |
| |
| if (v) |
| FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); |
| else |
| FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO); |
| |
| fpga_mii->mdio = v; |
| |
| return 0; |
| } |
| |
| static int mii_get_mdio(struct bb_miiphy_bus *bus, int *v) |
| { |
| u16 gpio; |
| struct fpga_mii *fpga_mii = bus->priv; |
| |
| FPGA_GET_REG(fpga_mii->fpga, gpio.read, &gpio); |
| |
| *v = ((gpio & GPIO_MDIO) != 0); |
| |
| return 0; |
| } |
| |
| static int mii_set_mdc(struct bb_miiphy_bus *bus, int v) |
| { |
| struct fpga_mii *fpga_mii = bus->priv; |
| |
| if (v) |
| FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDC); |
| else |
| FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDC); |
| |
| return 0; |
| } |
| |
| static int mii_delay(struct bb_miiphy_bus *bus) |
| { |
| udelay(1); |
| |
| return 0; |
| } |
| |
| struct bb_miiphy_bus bb_miiphy_buses[] = { |
| { |
| .name = "board0", |
| .init = mii_dummy_init, |
| .mdio_active = mii_mdio_active, |
| .mdio_tristate = mii_mdio_tristate, |
| .set_mdio = mii_set_mdio, |
| .get_mdio = mii_get_mdio, |
| .set_mdc = mii_set_mdc, |
| .delay = mii_delay, |
| .priv = &fpga_mii[0], |
| }, |
| { |
| .name = "board1", |
| .init = mii_dummy_init, |
| .mdio_active = mii_mdio_active, |
| .mdio_tristate = mii_mdio_tristate, |
| .set_mdio = mii_set_mdio, |
| .get_mdio = mii_get_mdio, |
| .set_mdc = mii_set_mdc, |
| .delay = mii_delay, |
| .priv = &fpga_mii[1], |
| }, |
| { |
| .name = "board2", |
| .init = mii_dummy_init, |
| .mdio_active = mii_mdio_active, |
| .mdio_tristate = mii_mdio_tristate, |
| .set_mdio = mii_set_mdio, |
| .get_mdio = mii_get_mdio, |
| .set_mdc = mii_set_mdc, |
| .delay = mii_delay, |
| .priv = &fpga_mii[2], |
| }, |
| { |
| .name = "board3", |
| .init = mii_dummy_init, |
| .mdio_active = mii_mdio_active, |
| .mdio_tristate = mii_mdio_tristate, |
| .set_mdio = mii_set_mdio, |
| .get_mdio = mii_get_mdio, |
| .set_mdc = mii_set_mdc, |
| .delay = mii_delay, |
| .priv = &fpga_mii[3], |
| }, |
| }; |
| |
| int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / |
| sizeof(bb_miiphy_buses[0]); |
| |
| /* |
| * Workaround for erratum mentioned in 88E1518 release notes |
| */ |
| |
| static int verify_88e1518(const char *bus, unsigned char addr) |
| { |
| u16 phy_id1, phy_id2; |
| |
| if (miiphy_read(bus, addr, 2, &phy_id1) || |
| miiphy_read(bus, addr, 3, &phy_id2)) { |
| printf("Error reading from the PHY addr=%02x\n", addr); |
| return -EIO; |
| } |
| |
| if ((phy_id1 != 0x0141) || ((phy_id2 & 0xfff0) != 0x0dd0)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| struct regfix_88e1518 { |
| u8 reg; |
| u16 data; |
| } regfix_88e1518[] = { |
| { 22, 0x00ff }, |
| { 17, 0x214b }, |
| { 16, 0x2144 }, |
| { 17, 0x0c28 }, |
| { 16, 0x2146 }, |
| { 17, 0xb233 }, |
| { 16, 0x214d }, |
| { 17, 0xcc0c }, |
| { 16, 0x2159 }, |
| { 22, 0x00fb }, |
| { 7, 0xc00d }, |
| { 22, 0x0000 }, |
| }; |
| |
| static int setup_88e1518(const char *bus, unsigned char addr) |
| { |
| unsigned int k; |
| |
| for (k = 0; k < ARRAY_SIZE(regfix_88e1518); ++k) { |
| if (miiphy_write(bus, addr, |
| regfix_88e1518[k].reg, |
| regfix_88e1518[k].data)) { |
| printf("Error writing to the PHY addr=%02x\n", addr); |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |