| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2014 - 2015 Xilinx, Inc. |
| * Michal Simek <michal.simek@xilinx.com> |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <cpu_func.h> |
| #include <debug_uart.h> |
| #include <env.h> |
| #include <env_internal.h> |
| #include <init.h> |
| #include <log.h> |
| #include <net.h> |
| #include <sata.h> |
| #include <ahci.h> |
| #include <scsi.h> |
| #include <malloc.h> |
| #include <wdt.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/psu_init_gpl.h> |
| #include <asm/cache.h> |
| #include <asm/io.h> |
| #include <asm/ptrace.h> |
| #include <dm/device.h> |
| #include <dm/uclass.h> |
| #include <usb.h> |
| #include <dwc3-uboot.h> |
| #include <zynqmppl.h> |
| #include <zynqmp_firmware.h> |
| #include <g_dnl.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/sizes.h> |
| #include "../common/board.h" |
| |
| #include "pm_cfg_obj.h" |
| |
| #define ZYNQMP_VERSION_SIZE 7 |
| #define EFUSE_VCU_DIS_MASK 0x100 |
| #define EFUSE_VCU_DIS_SHIFT 8 |
| #define EFUSE_GPU_DIS_MASK 0x20 |
| #define EFUSE_GPU_DIS_SHIFT 5 |
| #define IDCODE2_PL_INIT_MASK 0x200 |
| #define IDCODE2_PL_INIT_SHIFT 9 |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) |
| static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC; |
| |
| enum { |
| ZYNQMP_VARIANT_EG = BIT(0U), |
| ZYNQMP_VARIANT_EV = BIT(1U), |
| ZYNQMP_VARIANT_CG = BIT(2U), |
| ZYNQMP_VARIANT_DR = BIT(3U), |
| }; |
| |
| static const struct { |
| u32 id; |
| u8 device; |
| u8 variants; |
| } zynqmp_devices[] = { |
| { |
| .id = 0x04711093, |
| .device = 2, |
| .variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG, |
| }, |
| { |
| .id = 0x04710093, |
| .device = 3, |
| .variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG, |
| }, |
| { |
| .id = 0x04721093, |
| .device = 4, |
| .variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG | |
| ZYNQMP_VARIANT_EV, |
| }, |
| { |
| .id = 0x04720093, |
| .device = 5, |
| .variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG | |
| ZYNQMP_VARIANT_EV, |
| }, |
| { |
| .id = 0x04739093, |
| .device = 6, |
| .variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG, |
| }, |
| { |
| .id = 0x04730093, |
| .device = 7, |
| .variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG | |
| ZYNQMP_VARIANT_EV, |
| }, |
| { |
| .id = 0x04738093, |
| .device = 9, |
| .variants = ZYNQMP_VARIANT_EG, |
| }, |
| { |
| .id = 0x04740093, |
| .device = 11, |
| .variants = ZYNQMP_VARIANT_EG, |
| }, |
| { |
| .id = 0x04750093, |
| .device = 15, |
| .variants = ZYNQMP_VARIANT_EG, |
| }, |
| { |
| .id = 0x04759093, |
| .device = 17, |
| .variants = ZYNQMP_VARIANT_EG, |
| }, |
| { |
| .id = 0x04758093, |
| .device = 19, |
| .variants = ZYNQMP_VARIANT_EG, |
| }, |
| { |
| .id = 0x047E1093, |
| .device = 21, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| { |
| .id = 0x047E3093, |
| .device = 23, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| { |
| .id = 0x047E5093, |
| .device = 25, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| { |
| .id = 0x047E4093, |
| .device = 27, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| { |
| .id = 0x047E0093, |
| .device = 28, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| { |
| .id = 0x047E2093, |
| .device = 29, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| { |
| .id = 0x047E6093, |
| .device = 39, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| { |
| .id = 0x047FD093, |
| .device = 43, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| { |
| .id = 0x047F8093, |
| .device = 46, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| { |
| .id = 0x047FF093, |
| .device = 47, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| { |
| .id = 0x047FB093, |
| .device = 48, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| { |
| .id = 0x047FE093, |
| .device = 49, |
| .variants = ZYNQMP_VARIANT_DR, |
| }, |
| }; |
| |
| static char *zynqmp_get_silicon_idcode_name(void) |
| { |
| u32 i; |
| u32 idcode, idcode2; |
| char name[ZYNQMP_VERSION_SIZE]; |
| u32 ret_payload[PAYLOAD_ARG_CNT]; |
| |
| xilinx_pm_request(PM_GET_CHIPID, 0, 0, 0, 0, ret_payload); |
| |
| /* |
| * Firmware returns: |
| * payload[0][31:0] = status of the operation |
| * payload[1]] = IDCODE |
| * payload[2][19:0] = Version |
| * payload[2][28:20] = EXTENDED_IDCODE |
| * payload[2][29] = PL_INIT |
| */ |
| |
| idcode = ret_payload[1]; |
| idcode2 = ret_payload[2] >> ZYNQMP_CSU_VERSION_EMPTY_SHIFT; |
| debug("%s, IDCODE: 0x%0X, IDCODE2: 0x%0X\r\n", __func__, idcode, |
| idcode2); |
| |
| for (i = 0; i < ARRAY_SIZE(zynqmp_devices); i++) { |
| if (zynqmp_devices[i].id == (idcode & 0x0FFFFFFF)) |
| break; |
| } |
| |
| if (i >= ARRAY_SIZE(zynqmp_devices)) |
| return "unknown"; |
| |
| /* Add device prefix to the name */ |
| strncpy(name, "zu", ZYNQMP_VERSION_SIZE); |
| strncat(&name[2], simple_itoa(zynqmp_devices[i].device), 2); |
| |
| if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_EV) { |
| /* Devices with EV variant might be EG/CG/EV family */ |
| if (idcode2 & IDCODE2_PL_INIT_MASK) { |
| u32 family = ((idcode2 & EFUSE_VCU_DIS_MASK) >> |
| EFUSE_VCU_DIS_SHIFT) << 1 | |
| ((idcode2 & EFUSE_GPU_DIS_MASK) >> |
| EFUSE_GPU_DIS_SHIFT); |
| |
| /* |
| * Get family name based on extended idcode values as |
| * determined on UG1087, EXTENDED_IDCODE register |
| * description |
| */ |
| switch (family) { |
| case 0x00: |
| strncat(name, "ev", 2); |
| break; |
| case 0x10: |
| strncat(name, "eg", 2); |
| break; |
| case 0x11: |
| strncat(name, "cg", 2); |
| break; |
| default: |
| /* Do not append family name*/ |
| break; |
| } |
| } else { |
| /* |
| * When PL powered down the VCU Disable efuse cannot be |
| * read. So, ignore the bit and just findout if it is CG |
| * or EG/EV variant. |
| */ |
| strncat(name, (idcode2 & EFUSE_GPU_DIS_MASK) ? "cg" : |
| "e", 2); |
| } |
| } else if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_CG) { |
| /* Devices with CG variant might be EG or CG family */ |
| strncat(name, (idcode2 & EFUSE_GPU_DIS_MASK) ? "cg" : "eg", 2); |
| } else if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_EG) { |
| strncat(name, "eg", 2); |
| } else if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_DR) { |
| strncat(name, "dr", 2); |
| } else { |
| debug("Variant not identified\n"); |
| } |
| |
| return strdup(name); |
| } |
| #endif |
| |
| int board_early_init_f(void) |
| { |
| #if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED) |
| int ret; |
| |
| ret = psu_init(); |
| if (ret) |
| return ret; |
| |
| /* Delay is required for clocks to be propagated */ |
| udelay(1000000); |
| #endif |
| |
| #ifdef CONFIG_DEBUG_UART |
| /* Uart debug for sure */ |
| debug_uart_init(); |
| puts("Debug uart enabled\n"); /* or printch() */ |
| #endif |
| |
| return 0; |
| } |
| |
| static int multi_boot(void) |
| { |
| u32 multiboot; |
| |
| multiboot = readl(&csu_base->multi_boot); |
| |
| printf("Multiboot:\t%d\n", multiboot); |
| |
| return 0; |
| } |
| |
| #define PS_SYSMON_ANALOG_BUS_VAL 0x3210 |
| #define PS_SYSMON_ANALOG_BUS_REG 0xFFA50914 |
| |
| int board_init(void) |
| { |
| #if defined(CONFIG_ZYNQMP_FIRMWARE) |
| struct udevice *dev; |
| |
| uclass_get_device_by_name(UCLASS_FIRMWARE, "zynqmp-power", &dev); |
| if (!dev) |
| panic("PMU Firmware device not found - Enable it"); |
| #endif |
| |
| #if defined(CONFIG_SPL_BUILD) |
| /* Check *at build time* if the filename is an non-empty string */ |
| if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1) |
| zynqmp_pmufw_load_config_object(zynqmp_pm_cfg_obj, |
| zynqmp_pm_cfg_obj_size); |
| #endif |
| |
| printf("EL Level:\tEL%d\n", current_el()); |
| |
| /* Bug in ROM sets wrong value in this register */ |
| writel(PS_SYSMON_ANALOG_BUS_VAL, PS_SYSMON_ANALOG_BUS_REG); |
| |
| #if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) |
| zynqmppl.name = zynqmp_get_silicon_idcode_name(); |
| printf("Chip ID:\t%s\n", zynqmppl.name); |
| fpga_init(); |
| fpga_add(fpga_xilinx, &zynqmppl); |
| #endif |
| |
| if (current_el() == 3) |
| multi_boot(); |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| u32 val; |
| |
| if (current_el() != 3) |
| return 0; |
| |
| val = readl(&crlapb_base->timestamp_ref_ctrl); |
| val &= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT; |
| |
| if (!val) { |
| val = readl(&crlapb_base->timestamp_ref_ctrl); |
| val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT; |
| writel(val, &crlapb_base->timestamp_ref_ctrl); |
| |
| /* Program freq register in System counter */ |
| writel(zynqmp_get_system_timer_freq(), |
| &iou_scntr_secure->base_frequency_id_register); |
| /* And enable system counter */ |
| writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN, |
| &iou_scntr_secure->counter_control_register); |
| } |
| return 0; |
| } |
| |
| unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc, |
| char *const argv[]) |
| { |
| int ret = 0; |
| |
| if (current_el() > 1) { |
| smp_kick_all_cpus(); |
| dcache_disable(); |
| armv8_switch_to_el1(0x0, 0, 0, 0, (unsigned long)entry, |
| ES_TO_AARCH64); |
| } else { |
| printf("FAIL: current EL is not above EL1\n"); |
| ret = EINVAL; |
| } |
| return ret; |
| } |
| |
| #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE) |
| int dram_init_banksize(void) |
| { |
| int ret; |
| |
| ret = fdtdec_setup_memory_banksize(); |
| if (ret) |
| return ret; |
| |
| mem_map_fill(); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| if (fdtdec_setup_mem_size_base() != 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| #else |
| int dram_init_banksize(void) |
| { |
| gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; |
| gd->bd->bi_dram[0].size = get_effective_memsize(); |
| |
| mem_map_fill(); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, |
| CONFIG_SYS_SDRAM_SIZE); |
| |
| return 0; |
| } |
| #endif |
| |
| void reset_cpu(ulong addr) |
| { |
| } |
| |
| static u8 __maybe_unused zynqmp_get_bootmode(void) |
| { |
| u8 bootmode; |
| u32 reg = 0; |
| int ret; |
| |
| ret = zynqmp_mmio_read((ulong)&crlapb_base->boot_mode, ®); |
| if (ret) |
| return -EINVAL; |
| |
| if (reg >> BOOT_MODE_ALT_SHIFT) |
| reg >>= BOOT_MODE_ALT_SHIFT; |
| |
| bootmode = reg & BOOT_MODES_MASK; |
| |
| return bootmode; |
| } |
| |
| #if defined(CONFIG_BOARD_LATE_INIT) |
| static const struct { |
| u32 bit; |
| const char *name; |
| } reset_reasons[] = { |
| { RESET_REASON_DEBUG_SYS, "DEBUG" }, |
| { RESET_REASON_SOFT, "SOFT" }, |
| { RESET_REASON_SRST, "SRST" }, |
| { RESET_REASON_PSONLY, "PS-ONLY" }, |
| { RESET_REASON_PMU, "PMU" }, |
| { RESET_REASON_INTERNAL, "INTERNAL" }, |
| { RESET_REASON_EXTERNAL, "EXTERNAL" }, |
| {} |
| }; |
| |
| static int reset_reason(void) |
| { |
| u32 reg; |
| int i, ret; |
| const char *reason = NULL; |
| |
| ret = zynqmp_mmio_read((ulong)&crlapb_base->reset_reason, ®); |
| if (ret) |
| return -EINVAL; |
| |
| puts("Reset reason:\t"); |
| |
| for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) { |
| if (reg & reset_reasons[i].bit) { |
| reason = reset_reasons[i].name; |
| printf("%s ", reset_reasons[i].name); |
| break; |
| } |
| } |
| |
| puts("\n"); |
| |
| env_set("reset_reason", reason); |
| |
| ret = zynqmp_mmio_write((ulong)&crlapb_base->reset_reason, ~0, ~0); |
| if (ret) |
| return -EINVAL; |
| |
| return ret; |
| } |
| |
| static int set_fdtfile(void) |
| { |
| char *compatible, *fdtfile; |
| const char *suffix = ".dtb"; |
| const char *vendor = "xilinx/"; |
| int fdt_compat_len; |
| |
| if (env_get("fdtfile")) |
| return 0; |
| |
| compatible = (char *)fdt_getprop(gd->fdt_blob, 0, "compatible", |
| &fdt_compat_len); |
| if (compatible && fdt_compat_len) { |
| char *name; |
| |
| debug("Compatible: %s\n", compatible); |
| |
| name = strchr(compatible, ','); |
| if (!name) |
| return -EINVAL; |
| |
| name++; |
| |
| fdtfile = calloc(1, strlen(vendor) + strlen(name) + |
| strlen(suffix) + 1); |
| if (!fdtfile) |
| return -ENOMEM; |
| |
| sprintf(fdtfile, "%s%s%s", vendor, name, suffix); |
| |
| env_set("fdtfile", fdtfile); |
| free(fdtfile); |
| } |
| |
| return 0; |
| } |
| |
| int board_late_init(void) |
| { |
| u8 bootmode; |
| struct udevice *dev; |
| int bootseq = -1; |
| int bootseq_len = 0; |
| int env_targets_len = 0; |
| const char *mode; |
| char *new_targets; |
| char *env_targets; |
| int ret; |
| |
| #if defined(CONFIG_USB_ETHER) && !defined(CONFIG_USB_GADGET_DOWNLOAD) |
| usb_ether_init(); |
| #endif |
| |
| if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { |
| debug("Saved variables - Skipping\n"); |
| return 0; |
| } |
| |
| if (!CONFIG_IS_ENABLED(ENV_VARS_UBOOT_RUNTIME_CONFIG)) |
| return 0; |
| |
| ret = set_fdtfile(); |
| if (ret) |
| return ret; |
| |
| bootmode = zynqmp_get_bootmode(); |
| |
| puts("Bootmode: "); |
| switch (bootmode) { |
| case USB_MODE: |
| puts("USB_MODE\n"); |
| mode = "usb"; |
| env_set("modeboot", "usb_dfu_spl"); |
| break; |
| case JTAG_MODE: |
| puts("JTAG_MODE\n"); |
| mode = "jtag pxe dhcp"; |
| env_set("modeboot", "jtagboot"); |
| break; |
| case QSPI_MODE_24BIT: |
| case QSPI_MODE_32BIT: |
| mode = "qspi0"; |
| puts("QSPI_MODE\n"); |
| env_set("modeboot", "qspiboot"); |
| break; |
| case EMMC_MODE: |
| puts("EMMC_MODE\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "mmc@ff160000", &dev) && |
| uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@ff160000", &dev)) { |
| puts("Boot from EMMC but without SD0 enabled!\n"); |
| return -1; |
| } |
| debug("mmc0 device found at %p, seq %d\n", dev, dev->seq); |
| |
| mode = "mmc"; |
| bootseq = dev->seq; |
| break; |
| case SD_MODE: |
| puts("SD_MODE\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "mmc@ff160000", &dev) && |
| uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@ff160000", &dev)) { |
| puts("Boot from SD0 but without SD0 enabled!\n"); |
| return -1; |
| } |
| debug("mmc0 device found at %p, seq %d\n", dev, dev->seq); |
| |
| mode = "mmc"; |
| bootseq = dev->seq; |
| env_set("modeboot", "sdboot"); |
| break; |
| case SD1_LSHFT_MODE: |
| puts("LVL_SHFT_"); |
| /* fall through */ |
| case SD_MODE1: |
| puts("SD_MODE1\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "mmc@ff170000", &dev) && |
| uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@ff170000", &dev)) { |
| puts("Boot from SD1 but without SD1 enabled!\n"); |
| return -1; |
| } |
| debug("mmc1 device found at %p, seq %d\n", dev, dev->seq); |
| |
| mode = "mmc"; |
| bootseq = dev->seq; |
| env_set("modeboot", "sdboot"); |
| break; |
| case NAND_MODE: |
| puts("NAND_MODE\n"); |
| mode = "nand0"; |
| env_set("modeboot", "nandboot"); |
| break; |
| default: |
| mode = ""; |
| printf("Invalid Boot Mode:0x%x\n", bootmode); |
| break; |
| } |
| |
| if (bootseq >= 0) { |
| bootseq_len = snprintf(NULL, 0, "%i", bootseq); |
| debug("Bootseq len: %x\n", bootseq_len); |
| } |
| |
| /* |
| * One terminating char + one byte for space between mode |
| * and default boot_targets |
| */ |
| env_targets = env_get("boot_targets"); |
| if (env_targets) |
| env_targets_len = strlen(env_targets); |
| |
| new_targets = calloc(1, strlen(mode) + env_targets_len + 2 + |
| bootseq_len); |
| if (!new_targets) |
| return -ENOMEM; |
| |
| if (bootseq >= 0) |
| sprintf(new_targets, "%s%x %s", mode, bootseq, |
| env_targets ? env_targets : ""); |
| else |
| sprintf(new_targets, "%s %s", mode, |
| env_targets ? env_targets : ""); |
| |
| env_set("boot_targets", new_targets); |
| |
| reset_reason(); |
| |
| return board_late_init_xilinx(); |
| } |
| #endif |
| |
| int checkboard(void) |
| { |
| puts("Board: Xilinx ZynqMP\n"); |
| return 0; |
| } |
| |
| enum env_location env_get_location(enum env_operation op, int prio) |
| { |
| u32 bootmode = zynqmp_get_bootmode(); |
| |
| if (prio) |
| return ENVL_UNKNOWN; |
| |
| switch (bootmode) { |
| case EMMC_MODE: |
| case SD_MODE: |
| case SD1_LSHFT_MODE: |
| case SD_MODE1: |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT)) |
| return ENVL_FAT; |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4)) |
| return ENVL_EXT4; |
| return ENVL_UNKNOWN; |
| case NAND_MODE: |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND)) |
| return ENVL_NAND; |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_UBI)) |
| return ENVL_UBI; |
| return ENVL_UNKNOWN; |
| case QSPI_MODE_24BIT: |
| case QSPI_MODE_32BIT: |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) |
| return ENVL_SPI_FLASH; |
| return ENVL_UNKNOWN; |
| case JTAG_MODE: |
| default: |
| return ENVL_NOWHERE; |
| } |
| } |