CONFIG_ARM=y | |
CONFIG_SKIP_LOWLEVEL_INIT=y | |
CONFIG_SYS_DCACHE_OFF=y | |
CONFIG_ARCH_CPU_INIT=y | |
CONFIG_ARCH_KIRKWOOD=y | |
CONFIG_SYS_KWD_CONFIG="board/Seagate/nas220/kwbimage.cfg" | |
CONFIG_TEXT_BASE=0x600000 | |
CONFIG_NR_DRAM_BANKS=2 | |
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc8012000 | |
CONFIG_TARGET_NAS220=y | |
CONFIG_ENV_SIZE=0x10000 | |
CONFIG_ENV_OFFSET=0xA0000 | |
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-blackarmor-nas220" | |
CONFIG_SYS_PROMPT="nas220> " | |
CONFIG_IDENT_STRING="\nNAS 220" | |
CONFIG_SYS_LOAD_ADDR=0x800000 | |
# CONFIG_SYS_MALLOC_F is not set | |
CONFIG_BOOTDELAY=3 | |
CONFIG_USE_BOOTCOMMAND=y | |
CONFIG_USE_PREBOOT=y | |
# CONFIG_DISPLAY_BOARDINFO is not set | |
CONFIG_RESET_PHY_R=y | |
CONFIG_HUSH_PARSER=y | |
CONFIG_SYS_MAXARGS=32 | |
CONFIG_SYS_PBSIZE=1049 | |
# CONFIG_CMD_FLASH is not set | |
CONFIG_CMD_IDE=y | |
CONFIG_CMD_NAND=y | |
CONFIG_CMD_USB=y | |
# CONFIG_CMD_SETEXPR is not set | |
CONFIG_CMD_DHCP=y | |
CONFIG_SYS_DISABLE_AUTOLOAD=y | |
CONFIG_CMD_MII=y | |
CONFIG_CMD_PING=y | |
CONFIG_CMD_EXT2=y | |
CONFIG_CMD_EXT4=y | |
CONFIG_CMD_FAT=y | |
CONFIG_CMD_JFFS2=y | |
CONFIG_CMD_MTDPARTS=y | |
CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" | |
CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xa0000@0x0(uboot),0x010000@0xa0000(env),0x500000@0xc0000(uimage),0x1a40000@0x5c0000(rootfs)" | |
CONFIG_CMD_UBI=y | |
CONFIG_ISO_PARTITION=y | |
CONFIG_EFI_PARTITION=y | |
# CONFIG_PARTITION_UUIDS is not set | |
CONFIG_OF_CONTROL=y | |
CONFIG_ENV_OVERWRITE=y | |
CONFIG_ENV_IS_IN_NAND=y | |
CONFIG_SYS_RELOC_GD_ENV_ADDR=y | |
CONFIG_NETCONSOLE=y | |
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y | |
CONFIG_SYS_ATA_STRIDE=4 | |
CONFIG_SYS_ATA_DATA_OFFSET=0x100 | |
CONFIG_SYS_ATA_REG_OFFSET=0x100 | |
CONFIG_SYS_ATA_ALT_OFFSET=0x100 | |
CONFIG_LBA48=y | |
CONFIG_KIRKWOOD_GPIO=y | |
# CONFIG_MMC is not set | |
CONFIG_MTD=y | |
CONFIG_MTD_RAW_NAND=y | |
CONFIG_MVGBE=y | |
CONFIG_MII=y | |
CONFIG_DM_RTC=y | |
CONFIG_RTC_MV=y | |
CONFIG_SYS_NS16550_SERIAL=y | |
CONFIG_SYS_NS16550_REG_SIZE=-4 | |
CONFIG_USB=y | |
CONFIG_USB_EHCI_HCD=y | |
CONFIG_USB_STORAGE=y | |
CONFIG_JFFS2_LZO=y | |
CONFIG_JFFS2_NAND=y |