arch/arm/mach-rockchip/Kconfig

if ARCH_ROCKCHIP

config ROCKCHIP_PX30
	bool "Support Rockchip PX30"
	select ARM64
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select TPL
	select TPL_TINY_FRAMEWORK if TPL
	select TPL_NEEDS_SEPARATE_STACK if TPL
	imply SPL_SEPARATE_BSS
	select SPL_SERIAL
	select TPL_SERIAL
	select DEBUG_UART_BOARD_INIT
	imply ROCKCHIP_COMMON_BOARD
	imply SPL_ROCKCHIP_COMMON_BOARD
	help
	  The Rockchip PX30 is a ARM-based SoC with a quad-core Cortex-A35
	  including NEON and GPU, Mali-400 graphics, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.

config ROCKCHIP_RK3036
	bool "Support Rockchip RK3036"
	select CPU_V7A
	select SUPPORT_SPL
	select SPL
	imply USB_FUNCTION_ROCKUSB
	imply CMD_ROCKUSB
	imply ROCKCHIP_COMMON_BOARD
	help
	  The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7
	  including NEON and GPU, Mali-400 graphics, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.

config ROCKCHIP_RK3066
	bool "Support Rockchip RK3066"
	select CPU_V7A
	select SPL_BOARD_INIT if SPL
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select TPL
	select TPL_ROCKCHIP_BACK_TO_BROM
	select TPL_ROCKCHIP_EARLYRETURN_TO_BROM
	imply ROCKCHIP_COMMON_BOARD
	imply SPL_ROCKCHIP_COMMON_BOARD
	imply SPL_SERIAL
	imply TPL_ROCKCHIP_COMMON_BOARD
	imply TPL_SERIAL
	help
	  The Rockchip RK3066 is a ARM-based SoC with a dual-core Cortex-A9
	  including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two
	  video interfaces, several memory options and video codec support.
	  Peripherals include Fast Ethernet, USB2 host and OTG, SDIO, I2S,
	  UART, SPI, I2C and PWMs.

config ROCKCHIP_RK3128
	bool "Support Rockchip RK3128"
	select CPU_V7A
	imply ROCKCHIP_COMMON_BOARD
	help
	  The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7
	  including NEON and GPU, Mali-400 graphics, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.

config ROCKCHIP_RK3188
	bool "Support Rockchip RK3188"
	select CPU_V7A
	select SPL_BOARD_INIT if SPL
	select SUPPORT_SPL
	select SPL
	select SPL_CLK
	select SPL_REGMAP
	select SPL_SYSCON
	select SPL_RAM
	select SPL_DRIVERS_MISC
	select SPL_ROCKCHIP_EARLYRETURN_TO_BROM
	select SPL_ROCKCHIP_BACK_TO_BROM
	select BOARD_LATE_INIT
	imply ROCKCHIP_COMMON_BOARD
	imply SPL_ROCKCHIP_COMMON_BOARD
	help
	  The Rockchip RK3188 is a ARM-based SoC with a quad-core Cortex-A9
	  including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two
	  video interfaces, several memory options and video codec support.
	  Peripherals include Fast Ethernet, USB2 host and OTG, SDIO, I2S,
	  UART, SPI, I2C and PWMs.

config ROCKCHIP_RK322X
	bool "Support Rockchip RK3228/RK3229"
	select CPU_V7A
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select SPL_DM
	select SPL_OF_LIBFDT
	select TPL
	select TPL_DM
	select TPL_OF_LIBFDT
	select TPL_NEEDS_SEPARATE_STACK if TPL
	select SPL_DRIVERS_MISC
	imply ROCKCHIP_COMMON_BOARD
	imply SPL_SERIAL
	imply SPL_ROCKCHIP_COMMON_BOARD
	select SPL_OPTEE_IMAGE if SPL_FIT
	imply TPL_SERIAL
	imply TPL_ROCKCHIP_COMMON_BOARD
	select TPL_LIBCOMMON_SUPPORT
	select TPL_LIBGENERIC_SUPPORT
	help
	  The Rockchip RK3229 is a ARM-based SoC with a dual-core Cortex-A7
	  including NEON and GPU, Mali-400 graphics, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs.

config ROCKCHIP_RK3288
	bool "Support Rockchip RK3288"
	select CPU_V7A
	select OF_SYSTEM_SETUP
	select SKIP_LOWLEVEL_INIT_ONLY
	select SUPPORT_SPL
	select SPL
	select SUPPORT_TPL
	select FDT_64BIT
	imply PRE_CONSOLE_BUFFER
	imply ROCKCHIP_COMMON_BOARD
	imply SPL_ROCKCHIP_COMMON_BOARD
	imply TPL_CLK
	imply TPL_DM
	imply TPL_DRIVERS_MISC
	imply TPL_LIBCOMMON_SUPPORT
	imply TPL_LIBGENERIC_SUPPORT
	imply TPL_NEEDS_SEPARATE_STACK
	imply TPL_OF_CONTROL
	imply TPL_OF_PLATDATA
	imply TPL_RAM
	imply TPL_REGMAP
	imply TPL_ROCKCHIP_COMMON_BOARD
	imply TPL_SERIAL
	imply TPL_SYSCON
	imply USB_FUNCTION_ROCKUSB
	imply CMD_ROCKUSB
	help
	  The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17
	  including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
	  video interfaces supporting HDMI and eDP, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.

config ROCKCHIP_RK3308
	bool "Support Rockchip RK3308"
	select ARM64
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select SPL_ATF
	select SPL_ATF_NO_PLATFORM_PARAM
	select SPL_LOAD_FIT
	imply ARMV8_CRYPTO
	imply ARMV8_SET_SMPEN
	imply DM_RNG
	imply LEGACY_IMAGE_FORMAT
	imply MISC
	imply MISC_INIT_R
	imply RNG_ROCKCHIP
	imply ROCKCHIP_COMMON_BOARD
	imply ROCKCHIP_OTP
	imply SPL_CLK
	imply SPL_DM_SEQ_ALIAS
	imply SPL_FIT_SIGNATURE
	imply SPL_PINCTRL
	imply SPL_RAM
	imply SPL_REGMAP
	imply SPL_ROCKCHIP_COMMON_BOARD
	imply SPL_SEPARATE_BSS
	imply SPL_SERIAL
	imply SPL_SYSCON
	help
	  The Rockchip RK3308 is a ARM-based Soc which embedded with quad
	  Cortex-A35 and highly integrated audio interfaces.

config ROCKCHIP_RK3328
	bool "Support Rockchip RK3328"
	select ARM64
	select SUPPORT_SPL
	select SPL
	select SUPPORT_TPL
	select TPL
	select TPL_NEEDS_SEPARATE_STACK if TPL
	imply ARMV8_CRYPTO
	imply ARMV8_SET_SMPEN
	imply MISC
	imply MISC_INIT_R
	imply OF_LIVE
	imply PRE_CONSOLE_BUFFER
	imply ROCKCHIP_COMMON_BOARD
	imply ROCKCHIP_EFUSE
	imply ROCKCHIP_SDRAM_COMMON
	imply SPL_ROCKCHIP_COMMON_BOARD
	imply SPL_SEPARATE_BSS
	imply SPL_SERIAL
	imply TPL_SERIAL
	help
	  The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53.
	  including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
	  video interfaces supporting HDMI and eDP, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.

config ROCKCHIP_RK3368
	bool "Support Rockchip RK3368"
	select ARM64
	select SUPPORT_SPL
	select SUPPORT_TPL
	select TPL_NEEDS_SEPARATE_STACK if TPL
	imply ROCKCHIP_COMMON_BOARD
	imply SPL_ROCKCHIP_COMMON_BOARD
	imply SPL_SEPARATE_BSS
	imply SPL_SERIAL
	imply TPL_SERIAL
	imply TPL_ROCKCHIP_COMMON_BOARD
	help
	  The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised
	  into a big and little cluster with 4 cores each) Cortex-A53 including
	  AdvSIMD, 512KB L2 cache (for the big cluster) and 256 KB L2 cache
	  (for the little cluster), PowerVR G6110 based graphics, one video
	  output processor supporting LVDS/HDMI/eDP, several DDR3 options and
	  video codec support.

	  On-chip peripherals include Gigabit Ethernet, USB2 host and OTG, SDIO,
	  I2S, UARTs, SPI, I2C and PWMs.

config ROCKCHIP_RK3399
	bool "Support Rockchip RK3399"
	select ARM64
	select SUPPORT_SPL
	select SUPPORT_TPL
	select SPL
	select SPL_ATF
	select SPL_BOARD_INIT if SPL
	select SPL_LOAD_FIT
	select SPL_CLK if SPL
	select SPL_PINCTRL if SPL
	select SPL_RAM if SPL
	select SPL_REGMAP if SPL
	select SPL_SYSCON if SPL
	select TPL_NEEDS_SEPARATE_STACK if TPL
	select SPL_SEPARATE_BSS
	select SPL_SERIAL
	select SPL_DRIVERS_MISC
	select CLK
	select FIT
	select PINCTRL
	select RAM
	select REGMAP
	select SYSCON
	select DM_PMIC
	select DM_REGULATOR_FIXED
	select BOARD_LATE_INIT
	imply PARTITION_TYPE_GUID
	imply PRE_CONSOLE_BUFFER
	imply ROCKCHIP_COMMON_BOARD
	imply ROCKCHIP_SDRAM_COMMON
	imply SPL_ROCKCHIP_COMMON_BOARD
	imply TPL_SERIAL
	imply TPL_LIBCOMMON_SUPPORT
	imply TPL_LIBGENERIC_SUPPORT
	imply TPL_SYS_MALLOC_SIMPLE
	imply TPL_DRIVERS_MISC
	imply TPL_OF_CONTROL
	imply TPL_DM
	imply TPL_REGMAP
	imply TPL_SYSCON
	imply TPL_RAM
	imply TPL_CLK
	imply TPL_TINY_MEMSET
	imply TPL_ROCKCHIP_COMMON_BOARD
	imply SYS_BOOTCOUNT_SINGLEWORD if BOOTCOUNT_LIMIT
	imply BOOTSTD_FULL
	imply CMD_BOOTCOUNT if BOOTCOUNT_LIMIT
	imply MISC
	imply ROCKCHIP_EFUSE
	imply MISC_INIT_R
	help
	  The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72
	  and quad-core Cortex-A53.
	  including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two
	  video interfaces supporting HDMI and eDP, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.

config ROCKCHIP_RK3568
	bool "Support Rockchip RK3568"
	select ARM64
	select SUPPORT_SPL
	select SPL
	select CLK
	select PINCTRL
	select RAM
	select REGMAP
	select SYSCON
	select BOARD_LATE_INIT
	select DM_REGULATOR_FIXED
	select DM_RESET
	imply BOOTSTD_FULL
	imply DM_RNG
	imply MISC_INIT_R
	imply MMC_HS200_SUPPORT if MMC_SDHCI_ROCKCHIP
	imply OF_LIBFDT_OVERLAY
	imply PHY_GIGE if DWC_ETH_QOS_ROCKCHIP
	imply RNG_ROCKCHIP
	imply ROCKCHIP_COMMON_BOARD
	imply ROCKCHIP_OTP
	imply SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
	imply SPL_MMC_HS200_SUPPORT if SPL_MMC && MMC_HS200_SUPPORT
	help
	  The Rockchip RK3568 is a ARM-based SoC with quad-core Cortex-A55,
	  including NEON and GPU, 512K L3 cache, Mali-G52 based graphics,
	  two video interfaces supporting HDMI and eDP, several DDR3 options
	  and video codec support. Peripherals include Gigabit Ethernet,
	  USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs.

config ROCKCHIP_RK3588
	bool "Support Rockchip RK3588"
	select ARM64
	select SUPPORT_SPL
	select SPL
	select CLK
	select PINCTRL
	select RAM
	select REGMAP
	select SYSCON
	select BOARD_LATE_INIT
	select DM_REGULATOR_FIXED
	select DM_RESET
	imply BOOTSTD_FULL
	imply CLK_SCMI
	imply DM_RNG
	imply MISC_INIT_R
	imply MMC_HS200_SUPPORT if MMC_SDHCI_ROCKCHIP
	imply OF_LIBFDT_OVERLAY
	imply PHY_GIGE if DWC_ETH_QOS_ROCKCHIP
	imply RNG_ROCKCHIP
	imply ROCKCHIP_COMMON_BOARD
	imply ROCKCHIP_OTP
	imply SCMI_FIRMWARE
	imply SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
	imply SPL_MMC_HS200_SUPPORT if SPL_MMC && MMC_HS200_SUPPORT
	help
	  The Rockchip RK3588 is a ARM-based SoC with quad-core Cortex-A76 and
	  quad-core Cortex-A55 including NEON and GPU, 6TOPS NPU, Mali-G610 MP4,
	  HDMI Out, HDMI In, DP, eDP, MIPI DSI, MIPI CSI2, LPDDR4/4X/5, eMMC5.1,
	  SD3.0/MMC4.5, USB OTG 3.0, Type-C, USB 2.0, PCIe 3.0, SATA 3, Ethernet,
	  SDIO3.0 I2C, UART, SPI, GPIO and PWM.

config ROCKCHIP_RV1108
	bool "Support Rockchip RV1108"
	select CPU_V7A
	imply ROCKCHIP_COMMON_BOARD
	help
	  The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7
	  and a DSP.

config ROCKCHIP_RV1126
	bool "Support Rockchip RV1126"
	select CPU_V7A
	select SKIP_LOWLEVEL_INIT_ONLY
	select TPL
	select SUPPORT_TPL
	select TPL_NEEDS_SEPARATE_STACK
	select TPL_ROCKCHIP_BACK_TO_BROM
	select SPL
	select SUPPORT_SPL
	select SPL_STACK_R
	select CLK
	select FIT
	select PINCTRL
	select RAM
	select ROCKCHIP_SDRAM_COMMON
	select REGMAP
	select SYSCON
	select DM_PMIC
	select DM_REGULATOR_FIXED
	select DM_RESET
	select REGULATOR_RK8XX
	select PMIC_RK8XX
	select BOARD_LATE_INIT
	imply ROCKCHIP_COMMON_BOARD
	select SPL_OPTEE_IMAGE if SPL_FIT
	imply OF_LIBFDT_OVERLAY
	imply ROCKCHIP_OTP
	imply MISC_INIT_R
	imply TPL_DM
	imply TPL_LIBCOMMON_SUPPORT
	imply TPL_LIBGENERIC_SUPPORT
	imply TPL_OF_CONTROL
	imply TPL_OF_PLATDATA
	imply TPL_RAM
	imply TPL_ROCKCHIP_COMMON_BOARD
	imply TPL_SERIAL
	imply SPL_CLK
	imply SPL_DM
	imply SPL_DRIVERS_MISC
	imply SPL_LIBCOMMON_SUPPORT
	imply SPL_LIBGENERIC_SUPPORT
	imply SPL_OF_CONTROL
	imply SPL_RAM
	imply SPL_REGMAP
	imply SPL_ROCKCHIP_COMMON_BOARD
	imply SPL_SERIAL
	imply SPL_SYSCON

config ROCKCHIP_USB_UART
	bool "Route uart output to usb pins"
	help
	  Rockchip SoCs have the ability to route the signals of the debug
	  uart through the d+ and d- pins of a specific usb phy to enable
	  some form of closed-case debugging. With this option supported
	  SoCs will enable this routing as a debug measure.

config SPL_ROCKCHIP_BACK_TO_BROM
	bool "SPL returns to bootrom"
	default y if ROCKCHIP_RK3036
	select ROCKCHIP_BROM_HELPER
	select SPL_BOOTROM_SUPPORT
	depends on SPL
	help
	  Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled,
          SPL will return to the boot rom, which will then load the U-Boot
          binary to keep going on.

config TPL_ROCKCHIP_BACK_TO_BROM
	bool "TPL returns to bootrom"
	default y
	select ROCKCHIP_BROM_HELPER if !ROCKCHIP_RK3066
	select TPL_BOOTROM_SUPPORT
	depends on TPL
	help
	  Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled,
          SPL will return to the boot rom, which will then load the U-Boot
          binary to keep going on.

config ROCKCHIP_COMMON_BOARD
	bool "Rockchip common board file"
	help
	  Rockchip SoCs have similar boot process, Common board file is mainly
	  in charge of common process of board_init() and board_late_init() for
	  U-Boot proper.

config SPL_ROCKCHIP_COMMON_BOARD
	bool "Rockchip SPL common board file"
	depends on SPL
	help
	  Rockchip SoCs have similar boot process, SPL is mainly in charge of
	  load and boot Trust ATF/U-Boot firmware, and DRAM init if there is
	  no TPL for the board.

config TPL_ROCKCHIP_COMMON_BOARD
	bool "Rockchip TPL common board file"
	depends on TPL
	help
	  Rockchip SoCs have similar boot process, prefer to use TPL for DRAM
	  init and back to bootrom, and SPL as Trust ATF/U-Boot loader. TPL
	  common board is a basic TPL board init which can be shared for most
	  of SoCs to avoid copy-paste for different SoCs.

config ROCKCHIP_EXTERNAL_TPL
	bool "Use external TPL binary"
	default y if ROCKCHIP_RK3308 || ROCKCHIP_RK3568 || ROCKCHIP_RK3588
	help
	  Some Rockchip SoCs require an external TPL to initialize DRAM.
	  Enable this option and build with ROCKCHIP_TPL=/path/to/ddr.bin to
	  include the external TPL in the image built by binman.

config ROCKCHIP_BOOT_MODE_REG
	hex "Rockchip boot mode flag register address"
	help
	  The Soc will enter to different boot mode(defined in asm/arch-rockchip/boot_mode.h)
	  according to the value from this register.

config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON
	bool "Disable device boot on power plug-in"
	depends on PMIC_RK8XX
	---help---
	  Say Y here to prevent the device from booting up because of a plug-in
	  event. When set, the device will boot briefly to determine why it was
	  powered on, and if it was determined because of a plug-in event
	  instead of a button press event it will shut back off.

config ROCKCHIP_STIMER
	bool "Rockchip STIMER support"
	default y
	help
	  Enable Rockchip STIMER support.

config ROCKCHIP_STIMER_BASE
	hex
	depends on ROCKCHIP_STIMER

config ROCKCHIP_SPL_RESERVE_IRAM
	hex "Size of IRAM reserved in SPL"
	default 0x0
	help
	  SPL may need reserve memory for firmware loaded by SPL, whose load
	  address is in IRAM and may overlay with SPL text area if not
	  reserved.

config ROCKCHIP_BROM_HELPER
	bool

config SPL_ROCKCHIP_EARLYRETURN_TO_BROM
        bool "SPL requires early-return (for RK3188-style BROM) to BROM"
	depends on SPL && ENABLE_ARM_SOC_BOOT0_HOOK
	help
	  Some Rockchip BROM variants (e.g. on the RK3188) load the
	  first stage in segments and enter multiple times. E.g. on
	  the RK3188, the first 1KB of the first stage are loaded
	  first and entered; after returning to the BROM, the
	  remainder of the first stage is loaded, but the BROM
	  re-enters at the same address/to the same code as previously.

	  This enables support code in the BOOT0 hook for the SPL stage
	  to allow multiple entries.

config ROCKCHIP_DISABLE_FORCE_JTAG
	bool "Disable force_jtag feature"
	default y
	depends on SPL
	help
	  Rockchip SoCs can automatically switch between jtag and sdmmc based
	  on the following rules:
	  - all the SDMMC pins including SDMMC_DET set as SDMMC function in
	    GRF,
	  - force_jtag bit in GRF is 1,
	  - SDMMC_DET is low (no card detected),

	  Some HW design may not route the SD card card detect to SDMMC_DET
	  pin, thus breaking the SD card support in some cases because JTAG
	  would be auto-enabled by mistake.

	  Also, enabling JTAG at runtime may be an undesired feature, e.g.
	  because it could be a security vulnerability.

	  This disables force_jtag feature, which you may want for debugging
	  purposes.

	  If unsure, say Y.

config TPL_ROCKCHIP_EARLYRETURN_TO_BROM
        bool "TPL requires early-return (for RK3188-style BROM) to BROM"
	depends on TPL && ENABLE_ARM_SOC_BOOT0_HOOK
	help
	  Some Rockchip BROM variants (e.g. on the RK3188) load the
	  first stage in segments and enter multiple times. E.g. on
	  the RK3188, the first 1KB of the first stage are loaded
	  first and entered; after returning to the BROM, the
	  remainder of the first stage is loaded, but the BROM
	  re-enters at the same address/to the same code as previously.

	  This enables support code in the BOOT0 hook for the TPL stage
	  to allow multiple entries.

config SPL_MMC
	default y if !SPL_ROCKCHIP_BACK_TO_BROM

config ROCKCHIP_SPI_IMAGE
	bool "Build a SPI image for rockchip"
	help
	  Some Rockchip SoCs support booting from SPI flash. Enable this
	  option to produce a SPI-flash image containing U-Boot. The image
	  is built by binman. U-Boot sits near the start of the image.

config LNX_KRNL_IMG_TEXT_OFFSET_BASE
	default TEXT_BASE

config ROCKCHIP_COMMON_STACK_ADDR
	bool
	depends on SPL_SHARES_INIT_SP_ADDR
	select HAS_CUSTOM_SYS_INIT_SP_ADDR
	imply SPL_LIBCOMMON_SUPPORT if SPL
	imply SPL_LIBGENERIC_SUPPORT if SPL
	imply SPL_ROCKCHIP_COMMON_BOARD if SPL
	imply SPL_SYS_MALLOC_F if SPL
	imply SPL_SYS_MALLOC_SIMPLE if SPL
	imply TPL_LIBCOMMON_SUPPORT if TPL
	imply TPL_LIBGENERIC_SUPPORT if TPL
	imply TPL_ROCKCHIP_COMMON_BOARD if TPL
	imply TPL_SYS_MALLOC_F if TPL
	imply TPL_SYS_MALLOC_SIMPLE if TPL

config NR_DRAM_BANKS
	default 10 if ROCKCHIP_EXTERNAL_TPL

source "arch/arm/mach-rockchip/px30/Kconfig"
source "arch/arm/mach-rockchip/rk3036/Kconfig"
source "arch/arm/mach-rockchip/rk3066/Kconfig"
source "arch/arm/mach-rockchip/rk3128/Kconfig"
source "arch/arm/mach-rockchip/rk3188/Kconfig"
source "arch/arm/mach-rockchip/rk322x/Kconfig"
source "arch/arm/mach-rockchip/rk3288/Kconfig"
source "arch/arm/mach-rockchip/rk3308/Kconfig"
source "arch/arm/mach-rockchip/rk3328/Kconfig"
source "arch/arm/mach-rockchip/rk3368/Kconfig"
source "arch/arm/mach-rockchip/rk3399/Kconfig"
source "arch/arm/mach-rockchip/rk3568/Kconfig"
source "arch/arm/mach-rockchip/rk3588/Kconfig"
source "arch/arm/mach-rockchip/rv1108/Kconfig"
source "arch/arm/mach-rockchip/rv1126/Kconfig"

if ROCKCHIP_COMMON_STACK_ADDR && SPL_SHARES_INIT_SP_ADDR

config CUSTOM_SYS_INIT_SP_ADDR
	default 0x3f00000

config SYS_MALLOC_F_LEN
	default 0x10000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000

config SPL_SYS_MALLOC_F_LEN
	default 0x8000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000

config TPL_SYS_MALLOC_F_LEN
	default 0x4000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000

config TEXT_BASE
	default 0x00200000 if ARM64

config SPL_TEXT_BASE
	default 0x0 if ARM64

config SPL_HAS_BSS_LINKER_SECTION
	default y if ARM64

config SPL_BSS_START_ADDR
	default 0x3f80000

config SPL_BSS_MAX_SIZE
	default 0x8000 if SPL_BSS_START_ADDR = 0x3f80000

config SPL_STACK_R
	default y if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000

config SPL_STACK_R_ADDR
	default 0x3e00000 if CUSTOM_SYS_INIT_SP_ADDR = 0x3f00000

config SPL_STACK_R_MALLOC_SIMPLE_LEN
	default 0x200000 if SPL_STACK_R_ADDR = 0x3e00000

endif
endif