| /* |
| * (C) Copyright 2000-2010 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2008 |
| * Guennadi Liakhovetski, DENX Software Engineering, lg@denx.de. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #define _GNU_SOURCE |
| |
| #include <compiler.h> |
| #include <errno.h> |
| #include <env_flags.h> |
| #include <fcntl.h> |
| #include <linux/stringify.h> |
| #include <ctype.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <stddef.h> |
| #include <string.h> |
| #include <sys/types.h> |
| #include <sys/ioctl.h> |
| #include <sys/stat.h> |
| #include <unistd.h> |
| |
| #ifdef MTD_OLD |
| # include <stdint.h> |
| # include <linux/mtd/mtd.h> |
| #else |
| # define __user /* nothing */ |
| # include <mtd/mtd-user.h> |
| #endif |
| |
| #include "fw_env.h" |
| |
| struct common_args common_args; |
| struct printenv_args printenv_args; |
| struct setenv_args setenv_args; |
| |
| #define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) |
| |
| #define min(x, y) ({ \ |
| typeof(x) _min1 = (x); \ |
| typeof(y) _min2 = (y); \ |
| (void) (&_min1 == &_min2); \ |
| _min1 < _min2 ? _min1 : _min2; }) |
| |
| struct envdev_s { |
| const char *devname; /* Device name */ |
| ulong devoff; /* Device offset */ |
| ulong env_size; /* environment size */ |
| ulong erase_size; /* device erase size */ |
| ulong env_sectors; /* number of environment sectors */ |
| uint8_t mtd_type; /* type of the MTD device */ |
| }; |
| |
| static struct envdev_s envdevices[2] = |
| { |
| { |
| .mtd_type = MTD_ABSENT, |
| }, { |
| .mtd_type = MTD_ABSENT, |
| }, |
| }; |
| static int dev_current; |
| |
| #define DEVNAME(i) envdevices[(i)].devname |
| #define DEVOFFSET(i) envdevices[(i)].devoff |
| #define ENVSIZE(i) envdevices[(i)].env_size |
| #define DEVESIZE(i) envdevices[(i)].erase_size |
| #define ENVSECTORS(i) envdevices[(i)].env_sectors |
| #define DEVTYPE(i) envdevices[(i)].mtd_type |
| |
| #define CUR_ENVSIZE ENVSIZE(dev_current) |
| |
| #define ENV_SIZE getenvsize() |
| |
| struct env_image_single { |
| uint32_t crc; /* CRC32 over data bytes */ |
| char data[]; |
| }; |
| |
| struct env_image_redundant { |
| uint32_t crc; /* CRC32 over data bytes */ |
| unsigned char flags; /* active or obsolete */ |
| char data[]; |
| }; |
| |
| enum flag_scheme { |
| FLAG_NONE, |
| FLAG_BOOLEAN, |
| FLAG_INCREMENTAL, |
| }; |
| |
| struct environment { |
| void *image; |
| uint32_t *crc; |
| unsigned char *flags; |
| char *data; |
| enum flag_scheme flag_scheme; |
| }; |
| |
| static struct environment environment = { |
| .flag_scheme = FLAG_NONE, |
| }; |
| |
| static int env_aes_cbc_crypt(char *data, const int enc); |
| |
| static int HaveRedundEnv = 0; |
| |
| static unsigned char active_flag = 1; |
| /* obsolete_flag must be 0 to efficiently set it on NOR flash without erasing */ |
| static unsigned char obsolete_flag = 0; |
| |
| #define DEFAULT_ENV_INSTANCE_STATIC |
| #include <env_default.h> |
| |
| static int flash_io (int mode); |
| static char *envmatch (char * s1, char * s2); |
| static int parse_config (void); |
| |
| #if defined(CONFIG_FILE) |
| static int get_config (char *); |
| #endif |
| static inline ulong getenvsize (void) |
| { |
| ulong rc = CUR_ENVSIZE - sizeof(uint32_t); |
| |
| if (HaveRedundEnv) |
| rc -= sizeof (char); |
| |
| if (common_args.aes_flag) |
| rc &= ~(AES_KEY_LENGTH - 1); |
| |
| return rc; |
| } |
| |
| static char *skip_chars(char *s) |
| { |
| for (; *s != '\0'; s++) { |
| if (isblank(*s)) |
| return s; |
| } |
| return NULL; |
| } |
| |
| static char *skip_blanks(char *s) |
| { |
| for (; *s != '\0'; s++) { |
| if (!isblank(*s)) |
| return s; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Search the environment for a variable. |
| * Return the value, if found, or NULL, if not found. |
| */ |
| char *fw_getenv (char *name) |
| { |
| char *env, *nxt; |
| |
| for (env = environment.data; *env; env = nxt + 1) { |
| char *val; |
| |
| for (nxt = env; *nxt; ++nxt) { |
| if (nxt >= &environment.data[ENV_SIZE]) { |
| fprintf (stderr, "## Error: " |
| "environment not terminated\n"); |
| return NULL; |
| } |
| } |
| val = envmatch (name, env); |
| if (!val) |
| continue; |
| return val; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Search the default environment for a variable. |
| * Return the value, if found, or NULL, if not found. |
| */ |
| char *fw_getdefenv(char *name) |
| { |
| char *env, *nxt; |
| |
| for (env = default_environment; *env; env = nxt + 1) { |
| char *val; |
| |
| for (nxt = env; *nxt; ++nxt) { |
| if (nxt >= &default_environment[ENV_SIZE]) { |
| fprintf(stderr, "## Error: " |
| "default environment not terminated\n"); |
| return NULL; |
| } |
| } |
| val = envmatch(name, env); |
| if (!val) |
| continue; |
| return val; |
| } |
| return NULL; |
| } |
| |
| int parse_aes_key(char *key, uint8_t *bin_key) |
| { |
| char tmp[5] = { '0', 'x', 0, 0, 0 }; |
| unsigned long ul; |
| int i; |
| |
| if (strnlen(key, 64) != 32) { |
| fprintf(stderr, |
| "## Error: '-a' option requires 16-byte AES key\n"); |
| return -1; |
| } |
| |
| for (i = 0; i < 16; i++) { |
| tmp[2] = key[0]; |
| tmp[3] = key[1]; |
| errno = 0; |
| ul = strtoul(tmp, NULL, 16); |
| if (errno) { |
| fprintf(stderr, |
| "## Error: '-a' option requires valid AES key\n"); |
| return -1; |
| } |
| bin_key[i] = ul & 0xff; |
| key += 2; |
| } |
| return 0; |
| } |
| |
| /* |
| * Print the current definition of one, or more, or all |
| * environment variables |
| */ |
| int fw_printenv (int argc, char *argv[]) |
| { |
| char *env, *nxt; |
| int i, rc = 0; |
| |
| if (fw_env_open()) |
| return -1; |
| |
| if (argc == 0) { /* Print all env variables */ |
| for (env = environment.data; *env; env = nxt + 1) { |
| for (nxt = env; *nxt; ++nxt) { |
| if (nxt >= &environment.data[ENV_SIZE]) { |
| fprintf (stderr, "## Error: " |
| "environment not terminated\n"); |
| return -1; |
| } |
| } |
| |
| printf ("%s\n", env); |
| } |
| return 0; |
| } |
| |
| if (printenv_args.name_suppress && argc != 1) { |
| fprintf(stderr, |
| "## Error: `-n' option requires exactly one argument\n"); |
| return -1; |
| } |
| |
| for (i = 0; i < argc; ++i) { /* print single env variables */ |
| char *name = argv[i]; |
| char *val = NULL; |
| |
| for (env = environment.data; *env; env = nxt + 1) { |
| |
| for (nxt = env; *nxt; ++nxt) { |
| if (nxt >= &environment.data[ENV_SIZE]) { |
| fprintf (stderr, "## Error: " |
| "environment not terminated\n"); |
| return -1; |
| } |
| } |
| val = envmatch (name, env); |
| if (val) { |
| if (!printenv_args.name_suppress) { |
| fputs (name, stdout); |
| putc ('=', stdout); |
| } |
| puts (val); |
| break; |
| } |
| } |
| if (!val) { |
| fprintf (stderr, "## Error: \"%s\" not defined\n", name); |
| rc = -1; |
| } |
| } |
| |
| return rc; |
| } |
| |
| int fw_env_close(void) |
| { |
| int ret; |
| if (common_args.aes_flag) { |
| ret = env_aes_cbc_crypt(environment.data, 1); |
| if (ret) { |
| fprintf(stderr, |
| "Error: can't encrypt env for flash\n"); |
| return ret; |
| } |
| } |
| |
| /* |
| * Update CRC |
| */ |
| *environment.crc = crc32(0, (uint8_t *) environment.data, ENV_SIZE); |
| |
| /* write environment back to flash */ |
| if (flash_io(O_RDWR)) { |
| fprintf(stderr, |
| "Error: can't write fw_env to flash\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| /* |
| * Set/Clear a single variable in the environment. |
| * This is called in sequence to update the environment |
| * in RAM without updating the copy in flash after each set |
| */ |
| int fw_env_write(char *name, char *value) |
| { |
| int len; |
| char *env, *nxt; |
| char *oldval = NULL; |
| int deleting, creating, overwriting; |
| |
| /* |
| * search if variable with this name already exists |
| */ |
| for (nxt = env = environment.data; *env; env = nxt + 1) { |
| for (nxt = env; *nxt; ++nxt) { |
| if (nxt >= &environment.data[ENV_SIZE]) { |
| fprintf(stderr, "## Error: " |
| "environment not terminated\n"); |
| errno = EINVAL; |
| return -1; |
| } |
| } |
| if ((oldval = envmatch (name, env)) != NULL) |
| break; |
| } |
| |
| deleting = (oldval && !(value && strlen(value))); |
| creating = (!oldval && (value && strlen(value))); |
| overwriting = (oldval && (value && strlen(value))); |
| |
| /* check for permission */ |
| if (deleting) { |
| if (env_flags_validate_varaccess(name, |
| ENV_FLAGS_VARACCESS_PREVENT_DELETE)) { |
| printf("Can't delete \"%s\"\n", name); |
| errno = EROFS; |
| return -1; |
| } |
| } else if (overwriting) { |
| if (env_flags_validate_varaccess(name, |
| ENV_FLAGS_VARACCESS_PREVENT_OVERWR)) { |
| printf("Can't overwrite \"%s\"\n", name); |
| errno = EROFS; |
| return -1; |
| } else if (env_flags_validate_varaccess(name, |
| ENV_FLAGS_VARACCESS_PREVENT_NONDEF_OVERWR)) { |
| const char *defval = fw_getdefenv(name); |
| |
| if (defval == NULL) |
| defval = ""; |
| if (strcmp(oldval, defval) |
| != 0) { |
| printf("Can't overwrite \"%s\"\n", name); |
| errno = EROFS; |
| return -1; |
| } |
| } |
| } else if (creating) { |
| if (env_flags_validate_varaccess(name, |
| ENV_FLAGS_VARACCESS_PREVENT_CREATE)) { |
| printf("Can't create \"%s\"\n", name); |
| errno = EROFS; |
| return -1; |
| } |
| } else |
| /* Nothing to do */ |
| return 0; |
| |
| if (deleting || overwriting) { |
| if (*++nxt == '\0') { |
| *env = '\0'; |
| } else { |
| for (;;) { |
| *env = *nxt++; |
| if ((*env == '\0') && (*nxt == '\0')) |
| break; |
| ++env; |
| } |
| } |
| *++env = '\0'; |
| } |
| |
| /* Delete only ? */ |
| if (!value || !strlen(value)) |
| return 0; |
| |
| /* |
| * Append new definition at the end |
| */ |
| for (env = environment.data; *env || *(env + 1); ++env); |
| if (env > environment.data) |
| ++env; |
| /* |
| * Overflow when: |
| * "name" + "=" + "val" +"\0\0" > CUR_ENVSIZE - (env-environment) |
| */ |
| len = strlen (name) + 2; |
| /* add '=' for first arg, ' ' for all others */ |
| len += strlen(value) + 1; |
| |
| if (len > (&environment.data[ENV_SIZE] - env)) { |
| fprintf (stderr, |
| "Error: environment overflow, \"%s\" deleted\n", |
| name); |
| return -1; |
| } |
| |
| while ((*env = *name++) != '\0') |
| env++; |
| *env = '='; |
| while ((*++env = *value++) != '\0') |
| ; |
| |
| /* end is marked with double '\0' */ |
| *++env = '\0'; |
| |
| return 0; |
| } |
| |
| /* |
| * Deletes or sets environment variables. Returns -1 and sets errno error codes: |
| * 0 - OK |
| * EINVAL - need at least 1 argument |
| * EROFS - certain variables ("ethaddr", "serial#") cannot be |
| * modified or deleted |
| * |
| */ |
| int fw_setenv(int argc, char *argv[]) |
| { |
| int i; |
| size_t len; |
| char *name, **valv; |
| char *value = NULL; |
| int valc; |
| |
| if (argc < 1) { |
| fprintf(stderr, "## Error: variable name missing\n"); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| if (fw_env_open()) { |
| fprintf(stderr, "Error: environment not initialized\n"); |
| return -1; |
| } |
| |
| name = argv[0]; |
| valv = argv + 1; |
| valc = argc - 1; |
| |
| if (env_flags_validate_env_set_params(name, valv, valc) < 0) |
| return 1; |
| |
| len = 0; |
| for (i = 0; i < valc; ++i) { |
| char *val = valv[i]; |
| size_t val_len = strlen(val); |
| |
| if (value) |
| value[len - 1] = ' '; |
| value = realloc(value, len + val_len + 1); |
| if (!value) { |
| fprintf(stderr, |
| "Cannot malloc %zu bytes: %s\n", |
| len, strerror(errno)); |
| return -1; |
| } |
| |
| memcpy(value + len, val, val_len); |
| len += val_len; |
| value[len++] = '\0'; |
| } |
| |
| fw_env_write(name, value); |
| |
| free(value); |
| |
| return fw_env_close(); |
| } |
| |
| /* |
| * Parse a file and configure the u-boot variables. |
| * The script file has a very simple format, as follows: |
| * |
| * Each line has a couple with name, value: |
| * <white spaces>variable_name<white spaces>variable_value |
| * |
| * Both variable_name and variable_value are interpreted as strings. |
| * Any character after <white spaces> and before ending \r\n is interpreted |
| * as variable's value (no comment allowed on these lines !) |
| * |
| * Comments are allowed if the first character in the line is # |
| * |
| * Returns -1 and sets errno error codes: |
| * 0 - OK |
| * -1 - Error |
| */ |
| int fw_parse_script(char *fname) |
| { |
| FILE *fp; |
| char dump[1024]; /* Maximum line length in the file */ |
| char *name; |
| char *val; |
| int lineno = 0; |
| int len; |
| int ret = 0; |
| |
| if (fw_env_open()) { |
| fprintf(stderr, "Error: environment not initialized\n"); |
| return -1; |
| } |
| |
| if (strcmp(fname, "-") == 0) |
| fp = stdin; |
| else { |
| fp = fopen(fname, "r"); |
| if (fp == NULL) { |
| fprintf(stderr, "I cannot open %s for reading\n", |
| fname); |
| return -1; |
| } |
| } |
| |
| while (fgets(dump, sizeof(dump), fp)) { |
| lineno++; |
| len = strlen(dump); |
| |
| /* |
| * Read a whole line from the file. If the line is too long |
| * or is not terminated, reports an error and exit. |
| */ |
| if (dump[len - 1] != '\n') { |
| fprintf(stderr, |
| "Line %d not corrected terminated or too long\n", |
| lineno); |
| ret = -1; |
| break; |
| } |
| |
| /* Drop ending line feed / carriage return */ |
| dump[--len] = '\0'; |
| if (len && dump[len - 1] == '\r') |
| dump[--len] = '\0'; |
| |
| /* Skip comment or empty lines */ |
| if (len == 0 || dump[0] == '#') |
| continue; |
| |
| /* |
| * Search for variable's name, |
| * remove leading whitespaces |
| */ |
| name = skip_blanks(dump); |
| if (!name) |
| continue; |
| |
| /* The first white space is the end of variable name */ |
| val = skip_chars(name); |
| len = strlen(name); |
| if (val) { |
| *val++ = '\0'; |
| if ((val - name) < len) |
| val = skip_blanks(val); |
| else |
| val = NULL; |
| } |
| |
| #ifdef DEBUG |
| fprintf(stderr, "Setting %s : %s\n", |
| name, val ? val : " removed"); |
| #endif |
| |
| if (env_flags_validate_type(name, val) < 0) { |
| ret = -1; |
| break; |
| } |
| |
| /* |
| * If there is an error setting a variable, |
| * try to save the environment and returns an error |
| */ |
| if (fw_env_write(name, val)) { |
| fprintf(stderr, |
| "fw_env_write returns with error : %s\n", |
| strerror(errno)); |
| ret = -1; |
| break; |
| } |
| |
| } |
| |
| /* Close file if not stdin */ |
| if (strcmp(fname, "-") != 0) |
| fclose(fp); |
| |
| ret |= fw_env_close(); |
| |
| return ret; |
| |
| } |
| |
| /* |
| * Test for bad block on NAND, just returns 0 on NOR, on NAND: |
| * 0 - block is good |
| * > 0 - block is bad |
| * < 0 - failed to test |
| */ |
| static int flash_bad_block (int fd, uint8_t mtd_type, loff_t *blockstart) |
| { |
| if (mtd_type == MTD_NANDFLASH) { |
| int badblock = ioctl (fd, MEMGETBADBLOCK, blockstart); |
| |
| if (badblock < 0) { |
| perror ("Cannot read bad block mark"); |
| return badblock; |
| } |
| |
| if (badblock) { |
| #ifdef DEBUG |
| fprintf (stderr, "Bad block at 0x%llx, " |
| "skipping\n", *blockstart); |
| #endif |
| return badblock; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Read data from flash at an offset into a provided buffer. On NAND it skips |
| * bad blocks but makes sure it stays within ENVSECTORS (dev) starting from |
| * the DEVOFFSET (dev) block. On NOR the loop is only run once. |
| */ |
| static int flash_read_buf (int dev, int fd, void *buf, size_t count, |
| off_t offset, uint8_t mtd_type) |
| { |
| size_t blocklen; /* erase / write length - one block on NAND, |
| 0 on NOR */ |
| size_t processed = 0; /* progress counter */ |
| size_t readlen = count; /* current read length */ |
| off_t top_of_range; /* end of the last block we may use */ |
| off_t block_seek; /* offset inside the current block to the start |
| of the data */ |
| loff_t blockstart; /* running start of the current block - |
| MEMGETBADBLOCK needs 64 bits */ |
| int rc; |
| |
| blockstart = (offset / DEVESIZE (dev)) * DEVESIZE (dev); |
| |
| /* Offset inside a block */ |
| block_seek = offset - blockstart; |
| |
| if (mtd_type == MTD_NANDFLASH) { |
| /* |
| * NAND: calculate which blocks we are reading. We have |
| * to read one block at a time to skip bad blocks. |
| */ |
| blocklen = DEVESIZE (dev); |
| |
| /* |
| * To calculate the top of the range, we have to use the |
| * global DEVOFFSET (dev), which can be different from offset |
| */ |
| top_of_range = ((DEVOFFSET(dev) / blocklen) + |
| ENVSECTORS (dev)) * blocklen; |
| |
| /* Limit to one block for the first read */ |
| if (readlen > blocklen - block_seek) |
| readlen = blocklen - block_seek; |
| } else { |
| blocklen = 0; |
| top_of_range = offset + count; |
| } |
| |
| /* This only runs once on NOR flash */ |
| while (processed < count) { |
| rc = flash_bad_block (fd, mtd_type, &blockstart); |
| if (rc < 0) /* block test failed */ |
| return -1; |
| |
| if (blockstart + block_seek + readlen > top_of_range) { |
| /* End of range is reached */ |
| fprintf (stderr, |
| "Too few good blocks within range\n"); |
| return -1; |
| } |
| |
| if (rc) { /* block is bad */ |
| blockstart += blocklen; |
| continue; |
| } |
| |
| /* |
| * If a block is bad, we retry in the next block at the same |
| * offset - see common/env_nand.c::writeenv() |
| */ |
| lseek (fd, blockstart + block_seek, SEEK_SET); |
| |
| rc = read (fd, buf + processed, readlen); |
| if (rc != readlen) { |
| fprintf (stderr, "Read error on %s: %s\n", |
| DEVNAME (dev), strerror (errno)); |
| return -1; |
| } |
| #ifdef DEBUG |
| fprintf(stderr, "Read 0x%x bytes at 0x%llx on %s\n", |
| rc, blockstart + block_seek, DEVNAME(dev)); |
| #endif |
| processed += readlen; |
| readlen = min (blocklen, count - processed); |
| block_seek = 0; |
| blockstart += blocklen; |
| } |
| |
| return processed; |
| } |
| |
| /* |
| * Write count bytes at offset, but stay within ENVSECTORS (dev) sectors of |
| * DEVOFFSET (dev). Similar to the read case above, on NOR and dataflash we |
| * erase and write the whole data at once. |
| */ |
| static int flash_write_buf (int dev, int fd, void *buf, size_t count, |
| off_t offset, uint8_t mtd_type) |
| { |
| void *data; |
| struct erase_info_user erase; |
| size_t blocklen; /* length of NAND block / NOR erase sector */ |
| size_t erase_len; /* whole area that can be erased - may include |
| bad blocks */ |
| size_t erasesize; /* erase / write length - one block on NAND, |
| whole area on NOR */ |
| size_t processed = 0; /* progress counter */ |
| size_t write_total; /* total size to actually write - excluding |
| bad blocks */ |
| off_t erase_offset; /* offset to the first erase block (aligned) |
| below offset */ |
| off_t block_seek; /* offset inside the erase block to the start |
| of the data */ |
| off_t top_of_range; /* end of the last block we may use */ |
| loff_t blockstart; /* running start of the current block - |
| MEMGETBADBLOCK needs 64 bits */ |
| int rc; |
| |
| /* |
| * For mtd devices only offset and size of the environment do matter |
| */ |
| if (mtd_type == MTD_ABSENT) { |
| blocklen = count; |
| top_of_range = offset + count; |
| erase_len = blocklen; |
| blockstart = offset; |
| block_seek = 0; |
| write_total = blocklen; |
| } else { |
| blocklen = DEVESIZE(dev); |
| |
| top_of_range = ((DEVOFFSET(dev) / blocklen) + |
| ENVSECTORS(dev)) * blocklen; |
| |
| erase_offset = (offset / blocklen) * blocklen; |
| |
| /* Maximum area we may use */ |
| erase_len = top_of_range - erase_offset; |
| |
| blockstart = erase_offset; |
| /* Offset inside a block */ |
| block_seek = offset - erase_offset; |
| |
| /* |
| * Data size we actually write: from the start of the block |
| * to the start of the data, then count bytes of data, and |
| * to the end of the block |
| */ |
| write_total = ((block_seek + count + blocklen - 1) / |
| blocklen) * blocklen; |
| } |
| |
| /* |
| * Support data anywhere within erase sectors: read out the complete |
| * area to be erased, replace the environment image, write the whole |
| * block back again. |
| */ |
| if (write_total > count) { |
| data = malloc (erase_len); |
| if (!data) { |
| fprintf (stderr, |
| "Cannot malloc %zu bytes: %s\n", |
| erase_len, strerror (errno)); |
| return -1; |
| } |
| |
| rc = flash_read_buf (dev, fd, data, write_total, erase_offset, |
| mtd_type); |
| if (write_total != rc) |
| return -1; |
| |
| #ifdef DEBUG |
| fprintf(stderr, "Preserving data "); |
| if (block_seek != 0) |
| fprintf(stderr, "0x%x - 0x%lx", 0, block_seek - 1); |
| if (block_seek + count != write_total) { |
| if (block_seek != 0) |
| fprintf(stderr, " and "); |
| fprintf(stderr, "0x%lx - 0x%x", |
| block_seek + count, write_total - 1); |
| } |
| fprintf(stderr, "\n"); |
| #endif |
| /* Overwrite the old environment */ |
| memcpy (data + block_seek, buf, count); |
| } else { |
| /* |
| * We get here, iff offset is block-aligned and count is a |
| * multiple of blocklen - see write_total calculation above |
| */ |
| data = buf; |
| } |
| |
| if (mtd_type == MTD_NANDFLASH) { |
| /* |
| * NAND: calculate which blocks we are writing. We have |
| * to write one block at a time to skip bad blocks. |
| */ |
| erasesize = blocklen; |
| } else { |
| erasesize = erase_len; |
| } |
| |
| erase.length = erasesize; |
| |
| /* This only runs once on NOR flash and SPI-dataflash */ |
| while (processed < write_total) { |
| rc = flash_bad_block (fd, mtd_type, &blockstart); |
| if (rc < 0) /* block test failed */ |
| return rc; |
| |
| if (blockstart + erasesize > top_of_range) { |
| fprintf (stderr, "End of range reached, aborting\n"); |
| return -1; |
| } |
| |
| if (rc) { /* block is bad */ |
| blockstart += blocklen; |
| continue; |
| } |
| |
| if (mtd_type != MTD_ABSENT) { |
| erase.start = blockstart; |
| ioctl(fd, MEMUNLOCK, &erase); |
| /* These do not need an explicit erase cycle */ |
| if (mtd_type != MTD_DATAFLASH) |
| if (ioctl(fd, MEMERASE, &erase) != 0) { |
| fprintf(stderr, |
| "MTD erase error on %s: %s\n", |
| DEVNAME(dev), strerror(errno)); |
| return -1; |
| } |
| } |
| |
| if (lseek (fd, blockstart, SEEK_SET) == -1) { |
| fprintf (stderr, |
| "Seek error on %s: %s\n", |
| DEVNAME (dev), strerror (errno)); |
| return -1; |
| } |
| |
| #ifdef DEBUG |
| fprintf(stderr, "Write 0x%x bytes at 0x%llx\n", erasesize, |
| blockstart); |
| #endif |
| if (write (fd, data + processed, erasesize) != erasesize) { |
| fprintf (stderr, "Write error on %s: %s\n", |
| DEVNAME (dev), strerror (errno)); |
| return -1; |
| } |
| |
| if (mtd_type != MTD_ABSENT) |
| ioctl(fd, MEMLOCK, &erase); |
| |
| processed += erasesize; |
| block_seek = 0; |
| blockstart += erasesize; |
| } |
| |
| if (write_total > count) |
| free (data); |
| |
| return processed; |
| } |
| |
| /* |
| * Set obsolete flag at offset - NOR flash only |
| */ |
| static int flash_flag_obsolete (int dev, int fd, off_t offset) |
| { |
| int rc; |
| struct erase_info_user erase; |
| |
| erase.start = DEVOFFSET (dev); |
| erase.length = DEVESIZE (dev); |
| /* This relies on the fact, that obsolete_flag == 0 */ |
| rc = lseek (fd, offset, SEEK_SET); |
| if (rc < 0) { |
| fprintf (stderr, "Cannot seek to set the flag on %s \n", |
| DEVNAME (dev)); |
| return rc; |
| } |
| ioctl (fd, MEMUNLOCK, &erase); |
| rc = write (fd, &obsolete_flag, sizeof (obsolete_flag)); |
| ioctl (fd, MEMLOCK, &erase); |
| if (rc < 0) |
| perror ("Could not set obsolete flag"); |
| |
| return rc; |
| } |
| |
| /* Encrypt or decrypt the environment before writing or reading it. */ |
| static int env_aes_cbc_crypt(char *payload, const int enc) |
| { |
| uint8_t *data = (uint8_t *)payload; |
| const int len = getenvsize(); |
| uint8_t key_exp[AES_EXPAND_KEY_LENGTH]; |
| uint32_t aes_blocks; |
| |
| /* First we expand the key. */ |
| aes_expand_key(common_args.aes_key, key_exp); |
| |
| /* Calculate the number of AES blocks to encrypt. */ |
| aes_blocks = DIV_ROUND_UP(len, AES_KEY_LENGTH); |
| |
| if (enc) |
| aes_cbc_encrypt_blocks(key_exp, data, data, aes_blocks); |
| else |
| aes_cbc_decrypt_blocks(key_exp, data, data, aes_blocks); |
| |
| return 0; |
| } |
| |
| static int flash_write (int fd_current, int fd_target, int dev_target) |
| { |
| int rc; |
| |
| switch (environment.flag_scheme) { |
| case FLAG_NONE: |
| break; |
| case FLAG_INCREMENTAL: |
| (*environment.flags)++; |
| break; |
| case FLAG_BOOLEAN: |
| *environment.flags = active_flag; |
| break; |
| default: |
| fprintf (stderr, "Unimplemented flash scheme %u \n", |
| environment.flag_scheme); |
| return -1; |
| } |
| |
| #ifdef DEBUG |
| fprintf(stderr, "Writing new environment at 0x%lx on %s\n", |
| DEVOFFSET (dev_target), DEVNAME (dev_target)); |
| #endif |
| |
| rc = flash_write_buf(dev_target, fd_target, environment.image, |
| CUR_ENVSIZE, DEVOFFSET(dev_target), |
| DEVTYPE(dev_target)); |
| if (rc < 0) |
| return rc; |
| |
| if (environment.flag_scheme == FLAG_BOOLEAN) { |
| /* Have to set obsolete flag */ |
| off_t offset = DEVOFFSET (dev_current) + |
| offsetof (struct env_image_redundant, flags); |
| #ifdef DEBUG |
| fprintf(stderr, |
| "Setting obsolete flag in environment at 0x%lx on %s\n", |
| DEVOFFSET (dev_current), DEVNAME (dev_current)); |
| #endif |
| flash_flag_obsolete (dev_current, fd_current, offset); |
| } |
| |
| return 0; |
| } |
| |
| static int flash_read (int fd) |
| { |
| struct mtd_info_user mtdinfo; |
| struct stat st; |
| int rc; |
| |
| rc = fstat(fd, &st); |
| if (rc < 0) { |
| fprintf(stderr, "Cannot stat the file %s\n", |
| DEVNAME(dev_current)); |
| return -1; |
| } |
| |
| if (S_ISCHR(st.st_mode)) { |
| rc = ioctl(fd, MEMGETINFO, &mtdinfo); |
| if (rc < 0) { |
| fprintf(stderr, "Cannot get MTD information for %s\n", |
| DEVNAME(dev_current)); |
| return -1; |
| } |
| if (mtdinfo.type != MTD_NORFLASH && |
| mtdinfo.type != MTD_NANDFLASH && |
| mtdinfo.type != MTD_DATAFLASH && |
| mtdinfo.type != MTD_UBIVOLUME) { |
| fprintf (stderr, "Unsupported flash type %u on %s\n", |
| mtdinfo.type, DEVNAME(dev_current)); |
| return -1; |
| } |
| } else { |
| memset(&mtdinfo, 0, sizeof(mtdinfo)); |
| mtdinfo.type = MTD_ABSENT; |
| } |
| |
| DEVTYPE(dev_current) = mtdinfo.type; |
| |
| rc = flash_read_buf(dev_current, fd, environment.image, CUR_ENVSIZE, |
| DEVOFFSET (dev_current), mtdinfo.type); |
| if (rc != CUR_ENVSIZE) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int flash_io (int mode) |
| { |
| int fd_current, fd_target, rc, dev_target; |
| |
| /* dev_current: fd_current, erase_current */ |
| fd_current = open (DEVNAME (dev_current), mode); |
| if (fd_current < 0) { |
| fprintf (stderr, |
| "Can't open %s: %s\n", |
| DEVNAME (dev_current), strerror (errno)); |
| return -1; |
| } |
| |
| if (mode == O_RDWR) { |
| if (HaveRedundEnv) { |
| /* switch to next partition for writing */ |
| dev_target = !dev_current; |
| /* dev_target: fd_target, erase_target */ |
| fd_target = open (DEVNAME (dev_target), mode); |
| if (fd_target < 0) { |
| fprintf (stderr, |
| "Can't open %s: %s\n", |
| DEVNAME (dev_target), |
| strerror (errno)); |
| rc = -1; |
| goto exit; |
| } |
| } else { |
| dev_target = dev_current; |
| fd_target = fd_current; |
| } |
| |
| rc = flash_write (fd_current, fd_target, dev_target); |
| |
| if (HaveRedundEnv) { |
| if (close (fd_target)) { |
| fprintf (stderr, |
| "I/O error on %s: %s\n", |
| DEVNAME (dev_target), |
| strerror (errno)); |
| rc = -1; |
| } |
| } |
| } else { |
| rc = flash_read (fd_current); |
| } |
| |
| exit: |
| if (close (fd_current)) { |
| fprintf (stderr, |
| "I/O error on %s: %s\n", |
| DEVNAME (dev_current), strerror (errno)); |
| return -1; |
| } |
| |
| return rc; |
| } |
| |
| /* |
| * s1 is either a simple 'name', or a 'name=value' pair. |
| * s2 is a 'name=value' pair. |
| * If the names match, return the value of s2, else NULL. |
| */ |
| |
| static char *envmatch (char * s1, char * s2) |
| { |
| if (s1 == NULL || s2 == NULL) |
| return NULL; |
| |
| while (*s1 == *s2++) |
| if (*s1++ == '=') |
| return s2; |
| if (*s1 == '\0' && *(s2 - 1) == '=') |
| return s2; |
| return NULL; |
| } |
| |
| /* |
| * Prevent confusion if running from erased flash memory |
| */ |
| int fw_env_open(void) |
| { |
| int crc0, crc0_ok; |
| unsigned char flag0; |
| void *addr0; |
| |
| int crc1, crc1_ok; |
| unsigned char flag1; |
| void *addr1; |
| |
| int ret; |
| |
| struct env_image_single *single; |
| struct env_image_redundant *redundant; |
| |
| if (parse_config ()) /* should fill envdevices */ |
| return -1; |
| |
| addr0 = calloc(1, CUR_ENVSIZE); |
| if (addr0 == NULL) { |
| fprintf(stderr, |
| "Not enough memory for environment (%ld bytes)\n", |
| CUR_ENVSIZE); |
| return -1; |
| } |
| |
| /* read environment from FLASH to local buffer */ |
| environment.image = addr0; |
| |
| if (HaveRedundEnv) { |
| redundant = addr0; |
| environment.crc = &redundant->crc; |
| environment.flags = &redundant->flags; |
| environment.data = redundant->data; |
| } else { |
| single = addr0; |
| environment.crc = &single->crc; |
| environment.flags = NULL; |
| environment.data = single->data; |
| } |
| |
| dev_current = 0; |
| if (flash_io (O_RDONLY)) |
| return -1; |
| |
| crc0 = crc32 (0, (uint8_t *) environment.data, ENV_SIZE); |
| |
| if (common_args.aes_flag) { |
| ret = env_aes_cbc_crypt(environment.data, 0); |
| if (ret) |
| return ret; |
| } |
| |
| crc0_ok = (crc0 == *environment.crc); |
| if (!HaveRedundEnv) { |
| if (!crc0_ok) { |
| fprintf (stderr, |
| "Warning: Bad CRC, using default environment\n"); |
| memcpy(environment.data, default_environment, sizeof default_environment); |
| } |
| } else { |
| flag0 = *environment.flags; |
| |
| dev_current = 1; |
| addr1 = calloc(1, CUR_ENVSIZE); |
| if (addr1 == NULL) { |
| fprintf(stderr, |
| "Not enough memory for environment (%ld bytes)\n", |
| CUR_ENVSIZE); |
| return -1; |
| } |
| redundant = addr1; |
| |
| /* |
| * have to set environment.image for flash_read(), careful - |
| * other pointers in environment still point inside addr0 |
| */ |
| environment.image = addr1; |
| if (flash_io (O_RDONLY)) |
| return -1; |
| |
| /* Check flag scheme compatibility */ |
| if (DEVTYPE(dev_current) == MTD_NORFLASH && |
| DEVTYPE(!dev_current) == MTD_NORFLASH) { |
| environment.flag_scheme = FLAG_BOOLEAN; |
| } else if (DEVTYPE(dev_current) == MTD_NANDFLASH && |
| DEVTYPE(!dev_current) == MTD_NANDFLASH) { |
| environment.flag_scheme = FLAG_INCREMENTAL; |
| } else if (DEVTYPE(dev_current) == MTD_DATAFLASH && |
| DEVTYPE(!dev_current) == MTD_DATAFLASH) { |
| environment.flag_scheme = FLAG_BOOLEAN; |
| } else if (DEVTYPE(dev_current) == MTD_UBIVOLUME && |
| DEVTYPE(!dev_current) == MTD_UBIVOLUME) { |
| environment.flag_scheme = FLAG_INCREMENTAL; |
| } else if (DEVTYPE(dev_current) == MTD_ABSENT && |
| DEVTYPE(!dev_current) == MTD_ABSENT) { |
| environment.flag_scheme = FLAG_INCREMENTAL; |
| } else { |
| fprintf (stderr, "Incompatible flash types!\n"); |
| return -1; |
| } |
| |
| crc1 = crc32 (0, (uint8_t *) redundant->data, ENV_SIZE); |
| |
| if (common_args.aes_flag) { |
| ret = env_aes_cbc_crypt(redundant->data, 0); |
| if (ret) |
| return ret; |
| } |
| |
| crc1_ok = (crc1 == redundant->crc); |
| flag1 = redundant->flags; |
| |
| if (crc0_ok && !crc1_ok) { |
| dev_current = 0; |
| } else if (!crc0_ok && crc1_ok) { |
| dev_current = 1; |
| } else if (!crc0_ok && !crc1_ok) { |
| fprintf (stderr, |
| "Warning: Bad CRC, using default environment\n"); |
| memcpy (environment.data, default_environment, |
| sizeof default_environment); |
| dev_current = 0; |
| } else { |
| switch (environment.flag_scheme) { |
| case FLAG_BOOLEAN: |
| if (flag0 == active_flag && |
| flag1 == obsolete_flag) { |
| dev_current = 0; |
| } else if (flag0 == obsolete_flag && |
| flag1 == active_flag) { |
| dev_current = 1; |
| } else if (flag0 == flag1) { |
| dev_current = 0; |
| } else if (flag0 == 0xFF) { |
| dev_current = 0; |
| } else if (flag1 == 0xFF) { |
| dev_current = 1; |
| } else { |
| dev_current = 0; |
| } |
| break; |
| case FLAG_INCREMENTAL: |
| if (flag0 == 255 && flag1 == 0) |
| dev_current = 1; |
| else if ((flag1 == 255 && flag0 == 0) || |
| flag0 >= flag1) |
| dev_current = 0; |
| else /* flag1 > flag0 */ |
| dev_current = 1; |
| break; |
| default: |
| fprintf (stderr, "Unknown flag scheme %u \n", |
| environment.flag_scheme); |
| return -1; |
| } |
| } |
| |
| /* |
| * If we are reading, we don't need the flag and the CRC any |
| * more, if we are writing, we will re-calculate CRC and update |
| * flags before writing out |
| */ |
| if (dev_current) { |
| environment.image = addr1; |
| environment.crc = &redundant->crc; |
| environment.flags = &redundant->flags; |
| environment.data = redundant->data; |
| free (addr0); |
| } else { |
| environment.image = addr0; |
| /* Other pointers are already set */ |
| free (addr1); |
| } |
| #ifdef DEBUG |
| fprintf(stderr, "Selected env in %s\n", DEVNAME(dev_current)); |
| #endif |
| } |
| return 0; |
| } |
| |
| |
| static int parse_config () |
| { |
| struct stat st; |
| |
| #if defined(CONFIG_FILE) |
| if (!common_args.config_file) |
| common_args.config_file = CONFIG_FILE; |
| |
| /* Fills in DEVNAME(), ENVSIZE(), DEVESIZE(). Or don't. */ |
| if (get_config(common_args.config_file)) { |
| fprintf(stderr, "Cannot parse config file '%s': %m\n", |
| common_args.config_file); |
| return -1; |
| } |
| #else |
| DEVNAME (0) = DEVICE1_NAME; |
| DEVOFFSET (0) = DEVICE1_OFFSET; |
| ENVSIZE (0) = ENV1_SIZE; |
| /* Default values are: erase-size=env-size */ |
| DEVESIZE (0) = ENVSIZE (0); |
| /* #sectors=env-size/erase-size (rounded up) */ |
| ENVSECTORS (0) = (ENVSIZE(0) + DEVESIZE(0) - 1) / DEVESIZE(0); |
| #ifdef DEVICE1_ESIZE |
| DEVESIZE (0) = DEVICE1_ESIZE; |
| #endif |
| #ifdef DEVICE1_ENVSECTORS |
| ENVSECTORS (0) = DEVICE1_ENVSECTORS; |
| #endif |
| |
| #ifdef HAVE_REDUND |
| DEVNAME (1) = DEVICE2_NAME; |
| DEVOFFSET (1) = DEVICE2_OFFSET; |
| ENVSIZE (1) = ENV2_SIZE; |
| /* Default values are: erase-size=env-size */ |
| DEVESIZE (1) = ENVSIZE (1); |
| /* #sectors=env-size/erase-size (rounded up) */ |
| ENVSECTORS (1) = (ENVSIZE(1) + DEVESIZE(1) - 1) / DEVESIZE(1); |
| #ifdef DEVICE2_ESIZE |
| DEVESIZE (1) = DEVICE2_ESIZE; |
| #endif |
| #ifdef DEVICE2_ENVSECTORS |
| ENVSECTORS (1) = DEVICE2_ENVSECTORS; |
| #endif |
| HaveRedundEnv = 1; |
| #endif |
| #endif |
| if (stat (DEVNAME (0), &st)) { |
| fprintf (stderr, |
| "Cannot access MTD device %s: %s\n", |
| DEVNAME (0), strerror (errno)); |
| return -1; |
| } |
| |
| if (HaveRedundEnv && stat (DEVNAME (1), &st)) { |
| fprintf (stderr, |
| "Cannot access MTD device %s: %s\n", |
| DEVNAME (1), strerror (errno)); |
| return -1; |
| } |
| return 0; |
| } |
| |
| #if defined(CONFIG_FILE) |
| static int get_config (char *fname) |
| { |
| FILE *fp; |
| int i = 0; |
| int rc; |
| char dump[128]; |
| char *devname; |
| |
| fp = fopen (fname, "r"); |
| if (fp == NULL) |
| return -1; |
| |
| while (i < 2 && fgets (dump, sizeof (dump), fp)) { |
| /* Skip incomplete conversions and comment strings */ |
| if (dump[0] == '#') |
| continue; |
| |
| rc = sscanf (dump, "%ms %lx %lx %lx %lx", |
| &devname, |
| &DEVOFFSET (i), |
| &ENVSIZE (i), |
| &DEVESIZE (i), |
| &ENVSECTORS (i)); |
| |
| if (rc < 3) |
| continue; |
| |
| DEVNAME(i) = devname; |
| |
| if (rc < 4) |
| /* Assume the erase size is the same as the env-size */ |
| DEVESIZE(i) = ENVSIZE(i); |
| |
| if (rc < 5) |
| /* Assume enough env sectors to cover the environment */ |
| ENVSECTORS (i) = (ENVSIZE(i) + DEVESIZE(i) - 1) / DEVESIZE(i); |
| |
| i++; |
| } |
| fclose (fp); |
| |
| HaveRedundEnv = i - 1; |
| if (!i) { /* No valid entries found */ |
| errno = EINVAL; |
| return -1; |
| } else |
| return 0; |
| } |
| #endif |