| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2014 - 2018 Xilinx, Inc. |
| * Michal Simek <michal.simek@xilinx.com> |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <fdtdec.h> |
| #include <init.h> |
| #include <malloc.h> |
| #include <time.h> |
| #include <asm/io.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| #include <dm/device.h> |
| #include <dm/uclass.h> |
| #include <versalpl.h> |
| #include "../common/board.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if defined(CONFIG_FPGA_VERSALPL) |
| static xilinx_desc versalpl = XILINX_VERSAL_DESC; |
| #endif |
| |
| int board_init(void) |
| { |
| printf("EL Level:\tEL%d\n", current_el()); |
| |
| #if defined(CONFIG_FPGA_VERSALPL) |
| fpga_init(); |
| fpga_add(fpga_xilinx, &versalpl); |
| #endif |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| u32 val; |
| |
| if (current_el() != 3) |
| return 0; |
| |
| debug("iou_switch ctrl div0 %x\n", |
| readl(&crlapb_base->iou_switch_ctrl)); |
| |
| writel(IOU_SWITCH_CTRL_CLKACT_BIT | |
| (CONFIG_IOU_SWITCH_DIVISOR0 << IOU_SWITCH_CTRL_DIVISOR0_SHIFT), |
| &crlapb_base->iou_switch_ctrl); |
| |
| /* Global timer init - Program time stamp reference clk */ |
| val = readl(&crlapb_base->timestamp_ref_ctrl); |
| val |= CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT; |
| writel(val, &crlapb_base->timestamp_ref_ctrl); |
| |
| debug("ref ctrl 0x%x\n", |
| readl(&crlapb_base->timestamp_ref_ctrl)); |
| |
| /* Clear reset of timestamp reg */ |
| writel(0, &crlapb_base->rst_timestamp); |
| |
| /* |
| * Program freq register in System counter and |
| * enable system counter. |
| */ |
| writel(COUNTER_FREQUENCY, |
| &iou_scntr_secure->base_frequency_id_register); |
| |
| debug("counter val 0x%x\n", |
| readl(&iou_scntr_secure->base_frequency_id_register)); |
| |
| writel(IOU_SCNTRS_CONTROL_EN, |
| &iou_scntr_secure->counter_control_register); |
| |
| debug("scntrs control 0x%x\n", |
| readl(&iou_scntr_secure->counter_control_register)); |
| debug("timer 0x%llx\n", get_ticks()); |
| debug("timer 0x%llx\n", get_ticks()); |
| |
| return 0; |
| } |
| |
| static u8 versal_get_bootmode(void) |
| { |
| u8 bootmode; |
| u32 reg = 0; |
| |
| reg = readl(&crp_base->boot_mode_usr); |
| |
| if (reg >> BOOT_MODE_ALT_SHIFT) |
| reg >>= BOOT_MODE_ALT_SHIFT; |
| |
| bootmode = reg & BOOT_MODES_MASK; |
| |
| return bootmode; |
| } |
| |
| int board_late_init(void) |
| { |
| u8 bootmode; |
| struct udevice *dev; |
| int bootseq = -1; |
| int bootseq_len = 0; |
| int env_targets_len = 0; |
| const char *mode; |
| char *new_targets; |
| char *env_targets; |
| |
| if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { |
| debug("Saved variables - Skipping\n"); |
| return 0; |
| } |
| |
| bootmode = versal_get_bootmode(); |
| |
| puts("Bootmode: "); |
| switch (bootmode) { |
| case USB_MODE: |
| puts("USB_MODE\n"); |
| mode = "dfu_usb"; |
| break; |
| case JTAG_MODE: |
| puts("JTAG_MODE\n"); |
| mode = "jtag pxe dhcp"; |
| break; |
| case QSPI_MODE_24BIT: |
| puts("QSPI_MODE_24\n"); |
| mode = "xspi0"; |
| break; |
| case QSPI_MODE_32BIT: |
| puts("QSPI_MODE_32\n"); |
| mode = "xspi0"; |
| break; |
| case OSPI_MODE: |
| puts("OSPI_MODE\n"); |
| mode = "xspi0"; |
| break; |
| case EMMC_MODE: |
| puts("EMMC_MODE\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@f1050000", &dev)) { |
| puts("Boot from EMMC but without SD1 enabled!\n"); |
| return -1; |
| } |
| debug("mmc1 device found at %p, seq %d\n", dev, dev->seq); |
| mode = "mmc"; |
| bootseq = dev->seq; |
| break; |
| case SD_MODE: |
| puts("SD_MODE\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@f1040000", &dev)) { |
| puts("Boot from SD0 but without SD0 enabled!\n"); |
| return -1; |
| } |
| debug("mmc0 device found at %p, seq %d\n", dev, dev->seq); |
| |
| mode = "mmc"; |
| bootseq = dev->seq; |
| break; |
| case SD1_LSHFT_MODE: |
| puts("LVL_SHFT_"); |
| /* fall through */ |
| case SD_MODE1: |
| puts("SD_MODE1\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@f1050000", &dev)) { |
| puts("Boot from SD1 but without SD1 enabled!\n"); |
| return -1; |
| } |
| debug("mmc1 device found at %p, seq %d\n", dev, dev->seq); |
| |
| mode = "mmc"; |
| bootseq = dev->seq; |
| break; |
| default: |
| mode = ""; |
| printf("Invalid Boot Mode:0x%x\n", bootmode); |
| break; |
| } |
| |
| if (bootseq >= 0) { |
| bootseq_len = snprintf(NULL, 0, "%i", bootseq); |
| debug("Bootseq len: %x\n", bootseq_len); |
| } |
| |
| /* |
| * One terminating char + one byte for space between mode |
| * and default boot_targets |
| */ |
| env_targets = env_get("boot_targets"); |
| if (env_targets) |
| env_targets_len = strlen(env_targets); |
| |
| new_targets = calloc(1, strlen(mode) + env_targets_len + 2 + |
| bootseq_len); |
| if (!new_targets) |
| return -ENOMEM; |
| |
| if (bootseq >= 0) |
| sprintf(new_targets, "%s%x %s", mode, bootseq, |
| env_targets ? env_targets : ""); |
| else |
| sprintf(new_targets, "%s %s", mode, |
| env_targets ? env_targets : ""); |
| |
| env_set("boot_targets", new_targets); |
| |
| return board_late_init_xilinx(); |
| } |
| |
| int dram_init_banksize(void) |
| { |
| int ret; |
| |
| ret = fdtdec_setup_memory_banksize(); |
| if (ret) |
| return ret; |
| |
| mem_map_fill(); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| if (fdtdec_setup_mem_size_base() != 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| void reset_cpu(ulong addr) |
| { |
| } |