| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al. |
| * |
| */ |
| |
| #ifndef __MTD_MTD_H__ |
| #define __MTD_MTD_H__ |
| |
| #ifndef __UBOOT__ |
| #include <linux/types.h> |
| #include <linux/uio.h> |
| #include <linux/notifier.h> |
| #include <linux/device.h> |
| |
| #include <mtd/mtd-abi.h> |
| |
| #include <asm/div64.h> |
| #else |
| #include <linux/compat.h> |
| #include <mtd/mtd-abi.h> |
| #include <linux/errno.h> |
| #include <linux/list.h> |
| #include <div64.h> |
| #if IS_ENABLED(CONFIG_DM) |
| #include <dm/device.h> |
| #endif |
| #include <dm/ofnode.h> |
| |
| #define MAX_MTD_DEVICES 32 |
| #endif |
| |
| #define MTD_ERASE_PENDING 0x01 |
| #define MTD_ERASING 0x02 |
| #define MTD_ERASE_SUSPEND 0x04 |
| #define MTD_ERASE_DONE 0x08 |
| #define MTD_ERASE_FAILED 0x10 |
| |
| #define MTD_FAIL_ADDR_UNKNOWN -1LL |
| |
| /* |
| * If the erase fails, fail_addr might indicate exactly which block failed. If |
| * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level |
| * or was not specific to any particular block. |
| */ |
| struct erase_info { |
| struct mtd_info *mtd; |
| uint64_t addr; |
| uint64_t len; |
| uint64_t fail_addr; |
| u_long time; |
| u_long retries; |
| unsigned dev; |
| unsigned cell; |
| u_long priv; |
| u_char state; |
| struct erase_info *next; |
| int scrub; |
| }; |
| |
| struct mtd_erase_region_info { |
| uint64_t offset; /* At which this region starts, from the beginning of the MTD */ |
| uint32_t erasesize; /* For this region */ |
| uint32_t numblocks; /* Number of blocks of erasesize in this region */ |
| unsigned long *lockmap; /* If keeping bitmap of locks */ |
| }; |
| |
| /** |
| * struct mtd_oob_ops - oob operation operands |
| * @mode: operation mode |
| * |
| * @len: number of data bytes to write/read |
| * |
| * @retlen: number of data bytes written/read |
| * |
| * @ooblen: number of oob bytes to write/read |
| * @oobretlen: number of oob bytes written/read |
| * @ooboffs: offset of oob data in the oob area (only relevant when |
| * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW) |
| * @datbuf: data buffer - if NULL only oob data are read/written |
| * @oobbuf: oob data buffer |
| */ |
| struct mtd_oob_ops { |
| unsigned int mode; |
| size_t len; |
| size_t retlen; |
| size_t ooblen; |
| size_t oobretlen; |
| uint32_t ooboffs; |
| uint8_t *datbuf; |
| uint8_t *oobbuf; |
| }; |
| |
| #ifdef CONFIG_SYS_NAND_MAX_OOBFREE |
| #define MTD_MAX_OOBFREE_ENTRIES_LARGE CONFIG_SYS_NAND_MAX_OOBFREE |
| #else |
| #define MTD_MAX_OOBFREE_ENTRIES_LARGE 32 |
| #endif |
| |
| #ifdef CONFIG_SYS_NAND_MAX_ECCPOS |
| #define MTD_MAX_ECCPOS_ENTRIES_LARGE CONFIG_SYS_NAND_MAX_ECCPOS |
| #else |
| #define MTD_MAX_ECCPOS_ENTRIES_LARGE 680 |
| #endif |
| /** |
| * struct mtd_oob_region - oob region definition |
| * @offset: region offset |
| * @length: region length |
| * |
| * This structure describes a region of the OOB area, and is used |
| * to retrieve ECC or free bytes sections. |
| * Each section is defined by an offset within the OOB area and a |
| * length. |
| */ |
| struct mtd_oob_region { |
| u32 offset; |
| u32 length; |
| }; |
| |
| /* |
| * struct mtd_ooblayout_ops - NAND OOB layout operations |
| * @ecc: function returning an ECC region in the OOB area. |
| * Should return -ERANGE if %section exceeds the total number of |
| * ECC sections. |
| * @rfree: function returning a free region in the OOB area. |
| * Should return -ERANGE if %section exceeds the total number of |
| * free sections. |
| */ |
| struct mtd_ooblayout_ops { |
| int (*ecc)(struct mtd_info *mtd, int section, |
| struct mtd_oob_region *oobecc); |
| int (*rfree)(struct mtd_info *mtd, int section, |
| struct mtd_oob_region *oobfree); |
| }; |
| |
| /* |
| * Internal ECC layout control structure. For historical reasons, there is a |
| * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained |
| * for export to user-space via the ECCGETLAYOUT ioctl. |
| * nand_ecclayout should be expandable in the future simply by the above macros. |
| */ |
| struct nand_ecclayout { |
| __u32 eccbytes; |
| __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE]; |
| __u32 oobavail; |
| struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE]; |
| }; |
| |
| struct module; /* only needed for owner field in mtd_info */ |
| |
| struct mtd_info { |
| u_char type; |
| uint32_t flags; |
| uint64_t size; // Total size of the MTD |
| |
| /* "Major" erase size for the device. Naive users may take this |
| * to be the only erase size available, or may use the more detailed |
| * information below if they desire |
| */ |
| uint32_t erasesize; |
| /* Minimal writable flash unit size. In case of NOR flash it is 1 (even |
| * though individual bits can be cleared), in case of NAND flash it is |
| * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR |
| * it is of ECC block size, etc. It is illegal to have writesize = 0. |
| * Any driver registering a struct mtd_info must ensure a writesize of |
| * 1 or larger. |
| */ |
| uint32_t writesize; |
| |
| /* |
| * Size of the write buffer used by the MTD. MTD devices having a write |
| * buffer can write multiple writesize chunks at a time. E.g. while |
| * writing 4 * writesize bytes to a device with 2 * writesize bytes |
| * buffer the MTD driver can (but doesn't have to) do 2 writesize |
| * operations, but not 4. Currently, all NANDs have writebufsize |
| * equivalent to writesize (NAND page size). Some NOR flashes do have |
| * writebufsize greater than writesize. |
| */ |
| uint32_t writebufsize; |
| |
| uint32_t oobsize; // Amount of OOB data per block (e.g. 16) |
| uint32_t oobavail; // Available OOB bytes per block |
| |
| /* |
| * If erasesize is a power of 2 then the shift is stored in |
| * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize. |
| */ |
| unsigned int erasesize_shift; |
| unsigned int writesize_shift; |
| /* Masks based on erasesize_shift and writesize_shift */ |
| unsigned int erasesize_mask; |
| unsigned int writesize_mask; |
| |
| /* |
| * read ops return -EUCLEAN if max number of bitflips corrected on any |
| * one region comprising an ecc step equals or exceeds this value. |
| * Settable by driver, else defaults to ecc_strength. User can override |
| * in sysfs. N.B. The meaning of the -EUCLEAN return code has changed; |
| * see Documentation/ABI/testing/sysfs-class-mtd for more detail. |
| */ |
| unsigned int bitflip_threshold; |
| |
| // Kernel-only stuff starts here. |
| #ifndef __UBOOT__ |
| const char *name; |
| #else |
| char *name; |
| #endif |
| int index; |
| |
| /* OOB layout description */ |
| const struct mtd_ooblayout_ops *ooblayout; |
| |
| /* ECC layout structure pointer - read only! */ |
| struct nand_ecclayout *ecclayout; |
| |
| /* the ecc step size. */ |
| unsigned int ecc_step_size; |
| |
| /* max number of correctible bit errors per ecc step */ |
| unsigned int ecc_strength; |
| |
| /* Data for variable erase regions. If numeraseregions is zero, |
| * it means that the whole device has erasesize as given above. |
| */ |
| int numeraseregions; |
| struct mtd_erase_region_info *eraseregions; |
| |
| /* |
| * Do not call via these pointers, use corresponding mtd_*() |
| * wrappers instead. |
| */ |
| int (*_erase) (struct mtd_info *mtd, struct erase_info *instr); |
| #ifndef __UBOOT__ |
| int (*_point) (struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, void **virt, resource_size_t *phys); |
| int (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len); |
| #endif |
| unsigned long (*_get_unmapped_area) (struct mtd_info *mtd, |
| unsigned long len, |
| unsigned long offset, |
| unsigned long flags); |
| int (*_read) (struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, u_char *buf); |
| int (*_write) (struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, const u_char *buf); |
| int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, const u_char *buf); |
| int (*_read_oob) (struct mtd_info *mtd, loff_t from, |
| struct mtd_oob_ops *ops); |
| int (*_write_oob) (struct mtd_info *mtd, loff_t to, |
| struct mtd_oob_ops *ops); |
| int (*_get_fact_prot_info) (struct mtd_info *mtd, size_t len, |
| size_t *retlen, struct otp_info *buf); |
| int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, |
| size_t len, size_t *retlen, u_char *buf); |
| int (*_get_user_prot_info) (struct mtd_info *mtd, size_t len, |
| size_t *retlen, struct otp_info *buf); |
| int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from, |
| size_t len, size_t *retlen, u_char *buf); |
| int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to, |
| size_t len, size_t *retlen, u_char *buf); |
| int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, |
| size_t len); |
| #ifndef __UBOOT__ |
| int (*_writev) (struct mtd_info *mtd, const struct kvec *vecs, |
| unsigned long count, loff_t to, size_t *retlen); |
| #endif |
| void (*_sync) (struct mtd_info *mtd); |
| int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); |
| int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len); |
| int (*_is_locked) (struct mtd_info *mtd, loff_t ofs, uint64_t len); |
| int (*_block_isreserved) (struct mtd_info *mtd, loff_t ofs); |
| int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs); |
| int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs); |
| #ifndef __UBOOT__ |
| int (*_suspend) (struct mtd_info *mtd); |
| void (*_resume) (struct mtd_info *mtd); |
| void (*_reboot) (struct mtd_info *mtd); |
| #endif |
| /* |
| * If the driver is something smart, like UBI, it may need to maintain |
| * its own reference counting. The below functions are only for driver. |
| */ |
| int (*_get_device) (struct mtd_info *mtd); |
| void (*_put_device) (struct mtd_info *mtd); |
| |
| #ifndef __UBOOT__ |
| /* Backing device capabilities for this device |
| * - provides mmap capabilities |
| */ |
| struct backing_dev_info *backing_dev_info; |
| |
| struct notifier_block reboot_notifier; /* default mode before reboot */ |
| #endif |
| |
| /* ECC status information */ |
| struct mtd_ecc_stats ecc_stats; |
| /* Subpage shift (NAND) */ |
| int subpage_sft; |
| |
| void *priv; |
| |
| struct module *owner; |
| #ifndef __UBOOT__ |
| struct device dev; |
| #else |
| struct udevice *dev; |
| ofnode flash_node; |
| #endif |
| int usecount; |
| |
| /* MTD devices do not have any parent. MTD partitions do. */ |
| struct mtd_info *parent; |
| |
| /* |
| * Offset of the partition relatively to the parent offset. |
| * Is 0 for real MTD devices (ie. not partitions). |
| */ |
| u64 offset; |
| |
| /* |
| * List node used to add an MTD partition to the parent |
| * partition list. |
| */ |
| struct list_head node; |
| |
| /* |
| * List of partitions attached to this MTD device (the parent |
| * MTD device can itself be a partition). |
| */ |
| struct list_head partitions; |
| }; |
| |
| #if IS_ENABLED(CONFIG_DM) |
| static inline void mtd_set_ofnode(struct mtd_info *mtd, ofnode node) |
| { |
| dev_set_ofnode(mtd->dev, node); |
| } |
| |
| static inline const ofnode mtd_get_ofnode(struct mtd_info *mtd) |
| { |
| return dev_ofnode(mtd->dev); |
| } |
| #else |
| struct device_node; |
| |
| static inline void mtd_set_of_node(struct mtd_info *mtd, |
| const struct device_node *np) |
| { |
| } |
| |
| static inline const struct device_node *mtd_get_of_node(struct mtd_info *mtd) |
| { |
| return NULL; |
| } |
| #endif |
| |
| static inline bool mtd_is_partition(const struct mtd_info *mtd) |
| { |
| return mtd->parent; |
| } |
| |
| static inline bool mtd_has_partitions(const struct mtd_info *mtd) |
| { |
| return !list_empty(&mtd->partitions); |
| } |
| |
| bool mtd_partitions_used(struct mtd_info *master); |
| |
| int mtd_ooblayout_ecc(struct mtd_info *mtd, int section, |
| struct mtd_oob_region *oobecc); |
| int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte, |
| int *section, |
| struct mtd_oob_region *oobregion); |
| int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf, |
| const u8 *oobbuf, int start, int nbytes); |
| int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf, |
| u8 *oobbuf, int start, int nbytes); |
| int mtd_ooblayout_free(struct mtd_info *mtd, int section, |
| struct mtd_oob_region *oobfree); |
| int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf, |
| const u8 *oobbuf, int start, int nbytes); |
| int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf, |
| u8 *oobbuf, int start, int nbytes); |
| int mtd_ooblayout_count_freebytes(struct mtd_info *mtd); |
| int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd); |
| |
| static inline void mtd_set_ooblayout(struct mtd_info *mtd, |
| const struct mtd_ooblayout_ops *ooblayout) |
| { |
| mtd->ooblayout = ooblayout; |
| } |
| |
| static inline u32 mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops) |
| { |
| return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize; |
| } |
| |
| int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); |
| #ifndef __UBOOT__ |
| int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, |
| void **virt, resource_size_t *phys); |
| int mtd_unpoint(struct mtd_info *mtd, loff_t from, size_t len); |
| #endif |
| unsigned long mtd_get_unmapped_area(struct mtd_info *mtd, unsigned long len, |
| unsigned long offset, unsigned long flags); |
| int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, |
| u_char *buf); |
| int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, |
| const u_char *buf); |
| int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, |
| const u_char *buf); |
| |
| int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); |
| int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops); |
| |
| int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen, |
| struct otp_info *buf); |
| int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, u_char *buf); |
| int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen, |
| struct otp_info *buf); |
| int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, u_char *buf); |
| int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, u_char *buf); |
| int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len); |
| |
| #ifndef __UBOOT__ |
| int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, |
| unsigned long count, loff_t to, size_t *retlen); |
| #endif |
| |
| static inline void mtd_sync(struct mtd_info *mtd) |
| { |
| if (mtd->_sync) |
| mtd->_sync(mtd); |
| } |
| |
| int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len); |
| int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); |
| int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len); |
| int mtd_block_isreserved(struct mtd_info *mtd, loff_t ofs); |
| int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs); |
| int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs); |
| |
| #ifndef __UBOOT__ |
| static inline int mtd_suspend(struct mtd_info *mtd) |
| { |
| return mtd->_suspend ? mtd->_suspend(mtd) : 0; |
| } |
| |
| static inline void mtd_resume(struct mtd_info *mtd) |
| { |
| if (mtd->_resume) |
| mtd->_resume(mtd); |
| } |
| #endif |
| |
| static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd) |
| { |
| if (mtd->erasesize_shift) |
| return sz >> mtd->erasesize_shift; |
| do_div(sz, mtd->erasesize); |
| return sz; |
| } |
| |
| static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd) |
| { |
| if (mtd->erasesize_shift) |
| return sz & mtd->erasesize_mask; |
| return do_div(sz, mtd->erasesize); |
| } |
| |
| static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd) |
| { |
| if (mtd->writesize_shift) |
| return sz >> mtd->writesize_shift; |
| do_div(sz, mtd->writesize); |
| return sz; |
| } |
| |
| static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd) |
| { |
| if (mtd->writesize_shift) |
| return sz & mtd->writesize_mask; |
| return do_div(sz, mtd->writesize); |
| } |
| |
| static inline int mtd_has_oob(const struct mtd_info *mtd) |
| { |
| return mtd->_read_oob && mtd->_write_oob; |
| } |
| |
| static inline int mtd_type_is_nand(const struct mtd_info *mtd) |
| { |
| return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH; |
| } |
| |
| static inline int mtd_can_have_bb(const struct mtd_info *mtd) |
| { |
| return !!mtd->_block_isbad; |
| } |
| |
| /* Kernel-side ioctl definitions */ |
| |
| struct mtd_partition; |
| struct mtd_part_parser_data; |
| |
| extern int mtd_device_parse_register(struct mtd_info *mtd, |
| const char * const *part_probe_types, |
| struct mtd_part_parser_data *parser_data, |
| const struct mtd_partition *defparts, |
| int defnr_parts); |
| #define mtd_device_register(master, parts, nr_parts) \ |
| mtd_device_parse_register(master, NULL, NULL, parts, nr_parts) |
| extern int mtd_device_unregister(struct mtd_info *master); |
| extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); |
| extern int __get_mtd_device(struct mtd_info *mtd); |
| extern void __put_mtd_device(struct mtd_info *mtd); |
| extern struct mtd_info *get_mtd_device_nm(const char *name); |
| extern void put_mtd_device(struct mtd_info *mtd); |
| |
| |
| #ifndef __UBOOT__ |
| struct mtd_notifier { |
| void (*add)(struct mtd_info *mtd); |
| void (*remove)(struct mtd_info *mtd); |
| struct list_head list; |
| }; |
| |
| |
| extern void register_mtd_user (struct mtd_notifier *new); |
| extern int unregister_mtd_user (struct mtd_notifier *old); |
| #endif |
| void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size); |
| |
| static inline int mtd_is_bitflip(int err) { |
| return err == -EUCLEAN; |
| } |
| |
| static inline int mtd_is_eccerr(int err) { |
| return err == -EBADMSG; |
| } |
| |
| static inline int mtd_is_bitflip_or_eccerr(int err) { |
| return mtd_is_bitflip(err) || mtd_is_eccerr(err); |
| } |
| |
| unsigned mtd_mmap_capabilities(struct mtd_info *mtd); |
| |
| #ifdef __UBOOT__ |
| /* drivers/mtd/mtdcore.h */ |
| #if CONFIG_IS_ENABLED(MTD) |
| int add_mtd_device(struct mtd_info *mtd); |
| int del_mtd_device(struct mtd_info *mtd); |
| #else |
| static inline int add_mtd_device(struct mtd_info *mtd) |
| { |
| return -ENOSYS; |
| } |
| |
| static inline int del_mtd_device(struct mtd_info *mtd) |
| { |
| return -ENOSYS; |
| } |
| #endif |
| |
| #ifdef CONFIG_MTD_PARTITIONS |
| int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int); |
| int del_mtd_partitions(struct mtd_info *); |
| #else |
| static inline int add_mtd_partitions(struct mtd_info *mtd, |
| const struct mtd_partition *parts, |
| int nparts) |
| { |
| return 0; |
| } |
| |
| static inline int del_mtd_partitions(struct mtd_info *mtd) |
| { |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_MTD_PARTITIONS) && CONFIG_IS_ENABLED(DM) && \ |
| CONFIG_IS_ENABLED(OF_CONTROL) |
| int add_mtd_partitions_of(struct mtd_info *master); |
| #else |
| static inline int add_mtd_partitions_of(struct mtd_info *master) |
| { |
| return 0; |
| } |
| #endif |
| |
| struct mtd_info *__mtd_next_device(int i); |
| #define mtd_for_each_device(mtd) \ |
| for ((mtd) = __mtd_next_device(0); \ |
| (mtd) != NULL; \ |
| (mtd) = __mtd_next_device(mtd->index + 1)) |
| |
| /* drivers/mtd/mtdcore.c */ |
| void mtd_get_len_incl_bad(struct mtd_info *mtd, uint64_t offset, |
| const uint64_t length, uint64_t *len_incl_bad, |
| int *truncated); |
| bool mtd_dev_list_updated(void); |
| |
| /* drivers/mtd/mtd_uboot.c */ |
| int mtd_search_alternate_name(const char *mtdname, char *altname, |
| unsigned int max_len); |
| |
| #endif |
| #endif /* __MTD_MTD_H__ */ |