| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2013-2017 Altera Corporation <www.altera.com> |
| */ |
| |
| #include <asm/arch/clock_manager.h> |
| #include <asm/arch/system_manager.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <command.h> |
| #include <init.h> |
| #include <wait_bit.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| void cm_wait_for_lock(u32 mask) |
| { |
| u32 inter_val; |
| u32 retry = 0; |
| do { |
| #if defined(CONFIG_TARGET_SOCFPGA_GEN5) |
| inter_val = readl(socfpga_get_clkmgr_addr() + |
| CLKMGR_INTER) & mask; |
| #else |
| inter_val = readl(socfpga_get_clkmgr_addr() + |
| CLKMGR_STAT) & mask; |
| #endif |
| /* Wait for stable lock */ |
| if (inter_val == mask) |
| retry++; |
| else |
| retry = 0; |
| if (retry >= 10) |
| break; |
| } while (1); |
| } |
| |
| /* function to poll in the fsm busy bit */ |
| int cm_wait_for_fsm(void) |
| { |
| return wait_for_bit_le32((const void *)(socfpga_get_clkmgr_addr() + |
| CLKMGR_STAT), CLKMGR_STAT_BUSY, false, 20000, |
| false); |
| } |
| |
| int set_cpu_clk_info(void) |
| { |
| #if defined(CONFIG_TARGET_SOCFPGA_GEN5) |
| /* Calculate the clock frequencies required for drivers */ |
| cm_get_l4_sp_clk_hz(); |
| cm_get_mmc_controller_clk_hz(); |
| #endif |
| |
| gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000; |
| gd->bd->bi_dsp_freq = 0; |
| |
| #if defined(CONFIG_TARGET_SOCFPGA_GEN5) |
| gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000; |
| #else |
| gd->bd->bi_ddr_freq = 0; |
| #endif |
| |
| return 0; |
| } |
| |
| #if IS_ENABLED(CONFIG_TARGET_SOCFPGA_SOC64) |
| int cm_set_qspi_controller_clk_hz(u32 clk_hz) |
| { |
| u32 reg; |
| u32 clk_khz; |
| |
| /* |
| * Store QSPI ref clock and set into sysmgr boot register. |
| * Only clock freq in kHz degree is accepted due to limited bits[27:0] |
| * is reserved for storing the QSPI clock freq into boot scratch cold0 |
| * register. |
| */ |
| if (clk_hz < 1000) |
| return -EINVAL; |
| |
| clk_khz = clk_hz / 1000; |
| printf("QSPI: Reference clock at %d kHz\n", clk_khz); |
| |
| reg = (readl(socfpga_get_sysmgr_addr() + |
| SYSMGR_SOC64_BOOT_SCRATCH_COLD0)) & |
| ~(SYSMGR_SCRATCH_REG_0_QSPI_REFCLK_MASK); |
| |
| writel((clk_khz & SYSMGR_SCRATCH_REG_0_QSPI_REFCLK_MASK) | reg, |
| socfpga_get_sysmgr_addr() + SYSMGR_SOC64_BOOT_SCRATCH_COLD0); |
| |
| return 0; |
| } |
| |
| unsigned int cm_get_qspi_controller_clk_hz(void) |
| { |
| return (readl(socfpga_get_sysmgr_addr() + |
| SYSMGR_SOC64_BOOT_SCRATCH_COLD0) & |
| SYSMGR_SCRATCH_REG_0_QSPI_REFCLK_MASK) * 1000; |
| } |
| #endif |
| |
| #ifndef CONFIG_SPL_BUILD |
| static int do_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| cm_print_clock_quick_summary(); |
| return 0; |
| } |
| |
| U_BOOT_CMD( |
| clocks, CONFIG_SYS_MAXARGS, 1, do_showclocks, |
| "display clocks", |
| "" |
| ); |
| #endif |