| if ARCH_MX6 |
| |
| config MX6_SMP |
| select ARM_ERRATA_751472 |
| select ARM_ERRATA_761320 |
| select ARM_ERRATA_794072 |
| select ARM_ERRATA_845369 |
| bool |
| |
| config MX6 |
| select ARM_ERRATA_743622 if !MX6UL && !MX6ULL |
| select GPT_TIMER if !MX6UL && !MX6ULL |
| bool |
| default y |
| imply CMD_FUSE |
| |
| config MX6D |
| select HAS_CAAM |
| select MX6_SMP |
| bool |
| |
| config MX6DL |
| select HAS_CAAM |
| select MX6_SMP |
| bool |
| |
| config MX6Q |
| select HAS_CAAM |
| select MX6_SMP |
| bool |
| |
| config MX6QDL |
| select HAS_CAAM |
| select MX6_SMP |
| bool |
| |
| config MX6S |
| select HAS_CAAM |
| bool |
| |
| config MX6SL |
| bool |
| |
| config MX6SX |
| select HAS_CAAM |
| select ROM_UNIFIED_SECTIONS |
| bool |
| |
| config MX6SLL |
| select ROM_UNIFIED_SECTIONS |
| bool |
| |
| config MX6UL |
| select HAS_CAAM |
| select SYS_L2CACHE_OFF |
| select ROM_UNIFIED_SECTIONS |
| select SYSCOUNTER_TIMER |
| bool |
| |
| config MX6UL_LITESOM |
| bool |
| select MX6UL |
| select DM |
| select DM_THERMAL |
| select SUPPORT_SPL |
| |
| config MX6UL_OPOS6UL |
| bool |
| select MX6UL |
| select BOARD_LATE_INIT |
| select DM |
| select DM_GPIO |
| select DM_MMC |
| select DM_THERMAL |
| select SUPPORT_SPL |
| |
| config MX6ULL |
| select SYS_L2CACHE_OFF |
| select ROM_UNIFIED_SECTIONS |
| select SYSCOUNTER_TIMER |
| bool |
| |
| config MX6_DDRCAL |
| bool "Include dynamic DDR calibration routines" |
| depends on SPL |
| default n |
| help |
| Say "Y" if your board uses dynamic (per-boot) DDR calibration. |
| If unsure, say N. |
| |
| choice |
| prompt "MX6 board select" |
| optional |
| |
| config TARGET_ADVANTECH_DMS_BA16 |
| bool "Advantech dms-ba16" |
| select BOARD_LATE_INIT |
| select MX6Q |
| imply CMD_SATA |
| |
| config TARGET_APALIS_IMX6 |
| bool "Toradex Apalis iMX6 board" |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| select DM |
| select DM_SERIAL |
| select DM_THERMAL |
| imply CMD_SATA |
| |
| config TARGET_ARISTAINETOS |
| bool "aristainetos" |
| |
| config TARGET_ARISTAINETOS2 |
| bool "aristainetos2" |
| select BOARD_LATE_INIT |
| |
| config TARGET_ARISTAINETOS2B |
| bool "Support aristainetos2-revB" |
| select BOARD_LATE_INIT |
| |
| config TARGET_CGTQMX6EVAL |
| bool "cgtqmx6eval" |
| select MX6QDL |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| select DM |
| select DM_THERMAL |
| |
| config TARGET_CM_FX6 |
| bool "CM-FX6" |
| select SUPPORT_SPL |
| select MX6QDL |
| select BOARD_LATE_INIT |
| select DM |
| select DM_SERIAL |
| select DM_GPIO |
| |
| config TARGET_COLIBRI_IMX6 |
| bool "Toradex Colibri iMX6 board" |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| select DM |
| select DM_SERIAL |
| select DM_THERMAL |
| |
| config TARGET_DHCOMIMX6 |
| bool "dh_imx6" |
| select MX6QDL |
| select BOARD_LATE_INIT |
| select BOARD_EARLY_INIT_F |
| select SUPPORT_SPL |
| select DM |
| select DM_THERMAL |
| imply CMD_SPL |
| |
| config TARGET_DISPLAY5 |
| bool "LWN DISPLAY5 board" |
| select SUPPORT_SPL |
| select DM |
| select DM_SERIAL |
| |
| config TARGET_EMBESTMX6BOARDS |
| bool "embestmx6boards" |
| select BOARD_LATE_INIT |
| |
| config TARGET_GE_B450V3 |
| bool "General Electric B450v3" |
| select BOARD_LATE_INIT |
| select MX6Q |
| |
| config TARGET_GE_B650V3 |
| bool "General Electric B650v3" |
| select BOARD_LATE_INIT |
| select MX6Q |
| |
| config TARGET_GE_B850V3 |
| bool "General Electric B850v3" |
| select BOARD_LATE_INIT |
| select MX6Q |
| |
| config TARGET_GW_VENTANA |
| bool "gw_ventana" |
| select MX6QDL |
| select SUPPORT_SPL |
| imply CMD_SATA |
| imply CMD_SPL |
| |
| config TARGET_KOSAGI_NOVENA |
| bool "Kosagi Novena" |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| |
| config TARGET_MCCMON6 |
| bool "mccmon6" |
| select MX6QDL |
| select SUPPORT_SPL |
| |
| config TARGET_MX6CUBOXI |
| bool "Solid-run mx6 boards" |
| select MX6QDL |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| |
| config TARGET_MX6LOGICPD |
| bool "Logic PD i.MX6 SOM" |
| select BOARD_EARLY_INIT_F |
| select BOARD_LATE_INIT |
| select DM |
| select DM_ETH |
| select DM_GPIO |
| select DM_I2C |
| select DM_MMC |
| select DM_PMIC |
| select DM_REGULATOR |
| select OF_CONTROL |
| |
| config TARGET_MX6MEMCAL |
| bool "mx6memcal" |
| select SUPPORT_SPL |
| help |
| The mx6memcal board is a virtual board that can be used to validate |
| and characterize the memory layout of a new design during the initial |
| development and pre-production stages. |
| |
| config TARGET_MX6QARM2 |
| bool "mx6qarm2" |
| |
| config TARGET_MX6Q_ENGICAM |
| bool "Support Engicam i.Core(RQS)" |
| select BOARD_LATE_INIT |
| select MX6QDL |
| select OF_CONTROL |
| select SPL_OF_LIBFDT |
| select DM |
| select DM_ETH |
| select DM_GPIO |
| select DM_I2C |
| select DM_MMC |
| select DM_THERMAL |
| select SUPPORT_SPL |
| select SPL_LOAD_FIT |
| select SPL_DM if SPL |
| select SPL_OF_CONTROL if SPL |
| select SPL_SEPARATE_BSS if SPL |
| select SPL_PINCTRL if SPL |
| |
| config TARGET_MX6SABREAUTO |
| bool "mx6sabreauto" |
| select MX6QDL |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| select DM |
| select DM_THERMAL |
| select BOARD_EARLY_INIT_F |
| |
| config TARGET_MX6SABRESD |
| bool "mx6sabresd" |
| select MX6QDL |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| select DM |
| select DM_THERMAL |
| select BOARD_EARLY_INIT_F |
| |
| config TARGET_MX6SLEVK |
| bool "mx6slevk" |
| select MX6SL |
| select SUPPORT_SPL |
| |
| config TARGET_MX6SLLEVK |
| bool "mx6sll evk" |
| select BOARD_LATE_INIT |
| select MX6SLL |
| select DM |
| select DM_THERMAL |
| |
| config TARGET_MX6SXSABRESD |
| bool "mx6sxsabresd" |
| select BOARD_LATE_INIT |
| select MX6SX |
| select SUPPORT_SPL |
| select DM |
| select DM_THERMAL |
| select BOARD_EARLY_INIT_F |
| |
| config TARGET_MX6SXSABREAUTO |
| bool "mx6sxsabreauto" |
| select BOARD_LATE_INIT |
| select MX6SX |
| select DM |
| select DM_THERMAL |
| select BOARD_EARLY_INIT_F |
| |
| config TARGET_MX6UL_9X9_EVK |
| bool "mx6ul_9x9_evk" |
| select BOARD_LATE_INIT |
| select MX6UL |
| select DM |
| select DM_THERMAL |
| select SUPPORT_SPL |
| |
| config TARGET_MX6UL_14X14_EVK |
| select BOARD_LATE_INIT |
| bool "mx6ul_14x14_evk" |
| select MX6UL |
| select DM |
| select DM_THERMAL |
| select SUPPORT_SPL |
| |
| config TARGET_MX6UL_ENGICAM |
| bool "Support Engicam GEAM6UL/Is.IoT" |
| select BOARD_LATE_INIT |
| select MX6UL |
| select OF_CONTROL |
| select DM |
| select DM_ETH |
| select DM_GPIO |
| select DM_I2C |
| select DM_MMC |
| select DM_THERMAL |
| select SUPPORT_SPL |
| select SPL_DM if SPL |
| select SPL_OF_CONTROL if SPL |
| select SPL_SEPARATE_BSS if SPL |
| select SPL_PINCTRL if SPL |
| |
| config TARGET_MX6ULL_14X14_EVK |
| bool "Support mx6ull_14x14_evk" |
| select BOARD_LATE_INIT |
| select MX6ULL |
| select DM |
| select DM_THERMAL |
| |
| config TARGET_NITROGEN6X |
| bool "nitrogen6x" |
| imply USB_HOST_ETHER |
| imply USB_ETHER_ASIX |
| imply USB_ETHER_SMSC95XX |
| imply USB_ETHER_MCS7830 |
| |
| config TARGET_OPOS6ULDEV |
| bool "Armadeus OPOS6ULDev board" |
| select MX6UL_OPOS6UL |
| |
| config TARGET_OT1200 |
| bool "Bachmann OT1200" |
| select SUPPORT_SPL |
| imply CMD_SATA |
| |
| config TARGET_PICO_IMX6UL |
| bool "PICO-IMX6UL-EMMC" |
| select MX6UL |
| |
| config TARGET_LITEBOARD |
| bool "Grinn liteBoard (i.MX6UL)" |
| select BOARD_LATE_INIT |
| select MX6UL_LITESOM |
| |
| config TARGET_PLATINUM_PICON |
| bool "platinum-picon" |
| select SUPPORT_SPL |
| |
| config TARGET_PLATINUM_TITANIUM |
| bool "platinum-titanium" |
| select SUPPORT_SPL |
| |
| config TARGET_PCM058 |
| bool "Phytec PCM058 i.MX6 Quad" |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| |
| config TARGET_PFLA02 |
| bool "Phytec PFLA02 (PhyFlex) i.MX6 Quad" |
| select MX6QDL |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| |
| config TARGET_SECOMX6 |
| bool "secomx6 boards" |
| |
| config TARGET_SKSIMX6 |
| bool "sks-imx6" |
| select SUPPORT_SPL |
| |
| config TARGET_TBS2910 |
| bool "TBS2910 Matrix ARM mini PC" |
| |
| config TARGET_TITANIUM |
| bool "titanium" |
| |
| config TARGET_TQMA6 |
| bool "TQ Systems TQMa6 board" |
| select BOARD_LATE_INIT |
| |
| config TARGET_UDOO |
| bool "udoo" |
| select MX6QDL |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| |
| config TARGET_UDOO_NEO |
| bool "UDOO Neo" |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| select MX6SX |
| select DM |
| select DM_THERMAL |
| |
| config TARGET_SAMTEC_VINING_2000 |
| bool "samtec VIN|ING 2000" |
| select BOARD_LATE_INIT |
| select MX6SX |
| select DM |
| select DM_THERMAL |
| |
| config TARGET_WANDBOARD |
| bool "wandboard" |
| select MX6QDL |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| |
| config TARGET_WARP |
| bool "WaRP" |
| select MX6SL |
| select BOARD_LATE_INIT |
| |
| config TARGET_XPRESS |
| bool "CCV xPress" |
| select BOARD_LATE_INIT |
| select MX6UL |
| select DM |
| select DM_THERMAL |
| select SUPPORT_SPL |
| |
| config TARGET_ZC5202 |
| bool "zc5202" |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| select DM |
| select DM_THERMAL |
| |
| config TARGET_ZC5601 |
| bool "zc5601" |
| select BOARD_LATE_INIT |
| select SUPPORT_SPL |
| select DM |
| select DM_THERMAL |
| |
| endchoice |
| |
| config SYS_SOC |
| default "mx6" |
| |
| source "board/ge/bx50v3/Kconfig" |
| source "board/advantech/dms-ba16/Kconfig" |
| source "board/aristainetos/Kconfig" |
| source "board/armadeus/opos6uldev/Kconfig" |
| source "board/bachmann/ot1200/Kconfig" |
| source "board/barco/platinum/Kconfig" |
| source "board/barco/titanium/Kconfig" |
| source "board/boundary/nitrogen6x/Kconfig" |
| source "board/ccv/xpress/Kconfig" |
| source "board/compulab/cm_fx6/Kconfig" |
| source "board/congatec/cgtqmx6eval/Kconfig" |
| source "board/dhelectronics/dh_imx6/Kconfig" |
| source "board/el/el6x/Kconfig" |
| source "board/embest/mx6boards/Kconfig" |
| source "board/engicam/imx6q/Kconfig" |
| source "board/engicam/imx6ul/Kconfig" |
| source "board/freescale/mx6qarm2/Kconfig" |
| source "board/freescale/mx6memcal/Kconfig" |
| source "board/freescale/mx6sabreauto/Kconfig" |
| source "board/freescale/mx6sabresd/Kconfig" |
| source "board/freescale/mx6slevk/Kconfig" |
| source "board/freescale/mx6sllevk/Kconfig" |
| source "board/freescale/mx6sxsabresd/Kconfig" |
| source "board/freescale/mx6sxsabreauto/Kconfig" |
| source "board/freescale/mx6ul_14x14_evk/Kconfig" |
| source "board/freescale/mx6ullevk/Kconfig" |
| source "board/grinn/liteboard/Kconfig" |
| source "board/phytec/pcm058/Kconfig" |
| source "board/phytec/pfla02/Kconfig" |
| source "board/gateworks/gw_ventana/Kconfig" |
| source "board/kosagi/novena/Kconfig" |
| source "board/samtec/vining_2000/Kconfig" |
| source "board/liebherr/display5/Kconfig" |
| source "board/liebherr/mccmon6/Kconfig" |
| source "board/logicpd/imx6/Kconfig" |
| source "board/seco/Kconfig" |
| source "board/sks-kinkel/sksimx6/Kconfig" |
| source "board/solidrun/mx6cuboxi/Kconfig" |
| source "board/technexion/pico-imx6ul/Kconfig" |
| source "board/tbs/tbs2910/Kconfig" |
| source "board/tqc/tqma6/Kconfig" |
| source "board/toradex/apalis_imx6/Kconfig" |
| source "board/toradex/colibri_imx6/Kconfig" |
| source "board/udoo/Kconfig" |
| source "board/udoo/neo/Kconfig" |
| source "board/wandboard/Kconfig" |
| source "board/warp/Kconfig" |
| |
| endif |