| |
| if SOC_MT7621 |
| |
| menu "CPU & DDR configuration" |
| |
| config MT7621_CPU_FREQ |
| int "CPU Frequency (MHz)" |
| range 400 1200 |
| default 880 |
| |
| choice |
| prompt "DRAM Frequency" |
| default MT7621_DRAM_FREQ_1200 |
| |
| config MT7621_DRAM_FREQ_400 |
| bool "400MHz" |
| |
| config MT7621_DRAM_FREQ_800 |
| bool "800MHz" |
| |
| config MT7621_DRAM_FREQ_1066 |
| bool "1066MHz" |
| |
| config MT7621_DRAM_FREQ_1200 |
| bool "1200MHz" |
| |
| endchoice |
| |
| choice |
| prompt "DDR2 timing parameters" |
| default MT7621_DRAM_DDR2_1024M |
| |
| config MT7621_DRAM_DDR2_512M |
| bool "64MB" |
| |
| config MT7621_DRAM_DDR2_1024M |
| bool "128MB" |
| |
| config MT7621_DRAM_DDR2_512M_W9751G6KB_A02_1066MHZ |
| bool "W9751G6KB_A02 @ 1066MHz (64MB)" |
| |
| config MT7621_DRAM_DDR2_1024M_W971GG6KB25_800MHZ |
| bool "W971GG6KB25 @ 800MHz (128MB)" |
| |
| config MT7621_DRAM_DDR2_1024M_W971GG6KB18_1066MHZ |
| bool "W971GG6KB18 @ 1066MHz (128MB)" |
| |
| endchoice |
| |
| choice |
| prompt "DDR3 timing parameters" |
| default MT7621_DRAM_DDR3_2048M |
| |
| config MT7621_DRAM_DDR3_1024M |
| bool "128MB" |
| |
| config MT7621_DRAM_DDR3_1024M_KGD |
| bool "128MB KGD (MT7621DA)" |
| |
| config MT7621_DRAM_DDR3_2048M |
| bool "256MB" |
| |
| config MT7621_DRAM_DDR3_4096M |
| bool "512MB" |
| |
| endchoice |
| |
| endmenu |
| |
| config DEBUG_UART_BOARD_INIT |
| default y |
| |
| config MT7621_BOOT_FROM_NAND |
| bool "Boot from NAND" |
| help |
| Select this if u-boot will boot from NAND flash. When booting from |
| NAND, SPL will be loaded by bootrom directly and no TPL is needed. |
| |
| choice |
| prompt "Board select" |
| |
| endchoice |
| |
| config SYS_CONFIG_NAME |
| string "Board configuration name" |
| default "mt7621" if BOARD_MT7621_RFB || BOARD_MT7621_NAND_RFB |
| |
| config SYS_BOARD |
| string "Board name" |
| default "mt7621" if BOARD_MT7621_RFB || BOARD_MT7621_NAND_RFB |
| |
| config SYS_VENDOR |
| default "mediatek" if BOARD_MT7621_RFB || BOARD_MT7621_NAND_RFB |
| |
| endif |