| /* |
| * FSL UPM NAND driver |
| * |
| * Copyright (C) 2007 MontaVista Software, Inc. |
| * Anton Vorontsov <avorontsov@ru.mvista.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| */ |
| |
| #include <config.h> |
| |
| #if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_FSL_UPM) |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/errno.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/fsl_upm.h> |
| #include <nand.h> |
| |
| #define FSL_UPM_MxMR_OP_NO (0 << 28) /* normal operation */ |
| #define FSL_UPM_MxMR_OP_WA (1 << 28) /* write array */ |
| #define FSL_UPM_MxMR_OP_RA (2 << 28) /* read array */ |
| #define FSL_UPM_MxMR_OP_RP (3 << 28) /* run pattern */ |
| |
| static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset) |
| { |
| out_be32(upm->mxmr, FSL_UPM_MxMR_OP_RP | pat_offset); |
| } |
| |
| static void fsl_upm_end_pattern(struct fsl_upm *upm) |
| { |
| out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO); |
| while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO) |
| eieio(); |
| } |
| |
| static void fsl_upm_run_pattern(struct fsl_upm *upm, int width, u32 cmd) |
| { |
| out_be32(upm->mar, cmd << (32 - width * 8)); |
| out_8(upm->io_addr, 0x0); |
| } |
| |
| static void fsl_upm_setup(struct fsl_upm *upm) |
| { |
| int i; |
| |
| /* write upm array */ |
| out_be32(upm->mxmr, FSL_UPM_MxMR_OP_WA); |
| |
| for (i = 0; i < 64; i++) { |
| out_be32(upm->mdr, upm->array[i]); |
| out_8(upm->io_addr, 0x0); |
| } |
| |
| /* normal operation */ |
| out_be32(upm->mxmr, FSL_UPM_MxMR_OP_NO); |
| while (in_be32(upm->mxmr) != FSL_UPM_MxMR_OP_NO) |
| eieio(); |
| } |
| |
| static void fun_cmdfunc(struct mtd_info *mtd, unsigned command, int column, |
| int page_addr) |
| { |
| struct nand_chip *chip = mtd->priv; |
| struct fsl_upm_nand *fun = chip->priv; |
| |
| fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset); |
| |
| if (command == NAND_CMD_SEQIN) { |
| int readcmd; |
| |
| if (column >= mtd->oobblock) { |
| /* OOB area */ |
| column -= mtd->oobblock; |
| readcmd = NAND_CMD_READOOB; |
| } else if (column < 256) { |
| /* First 256 bytes --> READ0 */ |
| readcmd = NAND_CMD_READ0; |
| } else { |
| column -= 256; |
| readcmd = NAND_CMD_READ1; |
| } |
| fsl_upm_run_pattern(&fun->upm, fun->width, readcmd); |
| } |
| |
| fsl_upm_run_pattern(&fun->upm, fun->width, command); |
| |
| fsl_upm_end_pattern(&fun->upm); |
| |
| fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset); |
| |
| if (column != -1) |
| fsl_upm_run_pattern(&fun->upm, fun->width, column); |
| |
| if (page_addr != -1) { |
| fsl_upm_run_pattern(&fun->upm, fun->width, page_addr); |
| fsl_upm_run_pattern(&fun->upm, fun->width, |
| (page_addr >> 8) & 0xFF); |
| if (chip->chipsize > (32 << 20)) { |
| fsl_upm_run_pattern(&fun->upm, fun->width, |
| (page_addr >> 16) & 0x0f); |
| } |
| } |
| |
| fsl_upm_end_pattern(&fun->upm); |
| |
| if (fun->wait_pattern) { |
| /* |
| * Some boards/chips needs this. At least on MPC8360E-RDK we |
| * need it. Probably weird chip, because I don't see any need |
| * for this on MPC8555E + Samsung K9F1G08U0A. Usually here are |
| * 0-2 unexpected busy states per block read. |
| */ |
| while (!fun->dev_ready()) |
| debug("unexpected busy state\n"); |
| } |
| } |
| |
| static void nand_write_byte(struct mtd_info *mtd, u_char byte) |
| { |
| struct nand_chip *chip = mtd->priv; |
| |
| out_8(chip->IO_ADDR_W, byte); |
| } |
| |
| static u8 nand_read_byte(struct mtd_info *mtd) |
| { |
| struct nand_chip *chip = mtd->priv; |
| |
| return in_8(chip->IO_ADDR_R); |
| } |
| |
| static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) |
| { |
| int i; |
| struct nand_chip *chip = mtd->priv; |
| |
| for (i = 0; i < len; i++) |
| out_8(chip->IO_ADDR_W, buf[i]); |
| } |
| |
| static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) |
| { |
| int i; |
| struct nand_chip *chip = mtd->priv; |
| |
| for (i = 0; i < len; i++) |
| buf[i] = in_8(chip->IO_ADDR_R); |
| } |
| |
| static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) |
| { |
| int i; |
| struct nand_chip *chip = mtd->priv; |
| |
| for (i = 0; i < len; i++) { |
| if (buf[i] != in_8(chip->IO_ADDR_R)) |
| return -EFAULT; |
| } |
| |
| return 0; |
| } |
| |
| static void nand_hwcontrol(struct mtd_info *mtd, int cmd) |
| { |
| } |
| |
| static int nand_dev_ready(struct mtd_info *mtd) |
| { |
| struct nand_chip *chip = mtd->priv; |
| struct fsl_upm_nand *fun = chip->priv; |
| |
| return fun->dev_ready(); |
| } |
| |
| int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun) |
| { |
| /* yet only 8 bit accessors implemented */ |
| if (fun->width != 1) |
| return -ENOSYS; |
| |
| fsl_upm_setup(&fun->upm); |
| |
| chip->priv = fun; |
| chip->chip_delay = fun->chip_delay; |
| chip->eccmode = NAND_ECC_SOFT; |
| chip->cmdfunc = fun_cmdfunc; |
| chip->hwcontrol = nand_hwcontrol; |
| chip->read_byte = nand_read_byte; |
| chip->read_buf = nand_read_buf; |
| chip->write_byte = nand_write_byte; |
| chip->write_buf = nand_write_buf; |
| chip->verify_buf = nand_verify_buf; |
| chip->dev_ready = nand_dev_ready; |
| |
| return 0; |
| } |
| #endif /* CONFIG_CMD_NAND */ |