| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <clk.h> |
| #include <dm.h> |
| #include <dm/device-internal.h> |
| #include <dm/lists.h> |
| #include <dm/pinctrl.h> |
| #include <errno.h> |
| #include <malloc.h> |
| |
| #include <asm/gpio.h> |
| |
| extern U_BOOT_DRIVER(gpio_sunxi); |
| |
| /* |
| * This structure implements a simplified view of the possible pinmux settings: |
| * Each mux value is assumed to be the same for a given function, across the |
| * pins in each group (almost universally true, with same rare exceptions not |
| * relevant to U-Boot), but also across different ports (not true in many |
| * cases). We ignore the first problem, and work around the latter by just |
| * supporting one particular port for a each function. This works fine for all |
| * board configurations so far. If this would need to be revisited, we could |
| * add a "u8 port;" below and match that, with 0 encoding the "don't care" case. |
| */ |
| struct sunxi_pinctrl_function { |
| const char name[sizeof("gpio_out")]; |
| u8 mux; |
| }; |
| |
| struct sunxi_pinctrl_desc { |
| const struct sunxi_pinctrl_function *functions; |
| u8 num_functions; |
| u8 first_bank; |
| u8 num_banks; |
| }; |
| |
| struct sunxi_pinctrl_plat { |
| struct sunxi_gpio __iomem *base; |
| }; |
| |
| static int sunxi_pinctrl_get_pins_count(struct udevice *dev) |
| { |
| const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev); |
| |
| return desc->num_banks * SUNXI_GPIOS_PER_BANK; |
| } |
| |
| static const char *sunxi_pinctrl_get_pin_name(struct udevice *dev, |
| uint pin_selector) |
| { |
| const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev); |
| static char pin_name[sizeof("PN31")]; |
| |
| snprintf(pin_name, sizeof(pin_name), "P%c%d", |
| pin_selector / SUNXI_GPIOS_PER_BANK + desc->first_bank + 'A', |
| pin_selector % SUNXI_GPIOS_PER_BANK); |
| |
| return pin_name; |
| } |
| |
| static int sunxi_pinctrl_get_functions_count(struct udevice *dev) |
| { |
| const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev); |
| |
| return desc->num_functions; |
| } |
| |
| static const char *sunxi_pinctrl_get_function_name(struct udevice *dev, |
| uint func_selector) |
| { |
| const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev); |
| |
| return desc->functions[func_selector].name; |
| } |
| |
| static int sunxi_pinctrl_pinmux_set(struct udevice *dev, uint pin_selector, |
| uint func_selector) |
| { |
| const struct sunxi_pinctrl_desc *desc = dev_get_priv(dev); |
| struct sunxi_pinctrl_plat *plat = dev_get_plat(dev); |
| int bank = pin_selector / SUNXI_GPIOS_PER_BANK; |
| int pin = pin_selector % SUNXI_GPIOS_PER_BANK; |
| |
| debug("set mux: %-4s => %s (%d)\n", |
| sunxi_pinctrl_get_pin_name(dev, pin_selector), |
| sunxi_pinctrl_get_function_name(dev, func_selector), |
| desc->functions[func_selector].mux); |
| |
| sunxi_gpio_set_cfgbank(plat->base + bank, pin, |
| desc->functions[func_selector].mux); |
| |
| return 0; |
| } |
| |
| static const struct pinconf_param sunxi_pinctrl_pinconf_params[] = { |
| { "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 }, |
| { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 2 }, |
| { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 }, |
| { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 10 }, |
| }; |
| |
| static int sunxi_pinctrl_pinconf_set_pull(struct sunxi_pinctrl_plat *plat, |
| uint bank, uint pin, uint bias) |
| { |
| struct sunxi_gpio *regs = &plat->base[bank]; |
| |
| sunxi_gpio_set_pull_bank(regs, pin, bias); |
| |
| return 0; |
| } |
| |
| static int sunxi_pinctrl_pinconf_set_drive(struct sunxi_pinctrl_plat *plat, |
| uint bank, uint pin, uint drive) |
| { |
| struct sunxi_gpio *regs = &plat->base[bank]; |
| |
| if (drive < 10 || drive > 40) |
| return -EINVAL; |
| |
| /* Convert mA to the register value, rounding down. */ |
| sunxi_gpio_set_drv_bank(regs, pin, drive / 10 - 1); |
| |
| return 0; |
| } |
| |
| static int sunxi_pinctrl_pinconf_set(struct udevice *dev, uint pin_selector, |
| uint param, uint val) |
| { |
| struct sunxi_pinctrl_plat *plat = dev_get_plat(dev); |
| int bank = pin_selector / SUNXI_GPIOS_PER_BANK; |
| int pin = pin_selector % SUNXI_GPIOS_PER_BANK; |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_DISABLE: |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| case PIN_CONFIG_BIAS_PULL_UP: |
| return sunxi_pinctrl_pinconf_set_pull(plat, bank, pin, val); |
| case PIN_CONFIG_DRIVE_STRENGTH: |
| return sunxi_pinctrl_pinconf_set_drive(plat, bank, pin, val); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int sunxi_pinctrl_get_pin_muxing(struct udevice *dev, uint pin_selector, |
| char *buf, int size) |
| { |
| struct sunxi_pinctrl_plat *plat = dev_get_plat(dev); |
| int bank = pin_selector / SUNXI_GPIOS_PER_BANK; |
| int pin = pin_selector % SUNXI_GPIOS_PER_BANK; |
| int mux = sunxi_gpio_get_cfgbank(plat->base + bank, pin); |
| |
| switch (mux) { |
| case SUNXI_GPIO_INPUT: |
| strlcpy(buf, "gpio input", size); |
| break; |
| case SUNXI_GPIO_OUTPUT: |
| strlcpy(buf, "gpio output", size); |
| break; |
| case SUNXI_GPIO_DISABLE: |
| strlcpy(buf, "disabled", size); |
| break; |
| default: |
| snprintf(buf, size, "function %d", mux); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const struct pinctrl_ops sunxi_pinctrl_ops = { |
| .get_pins_count = sunxi_pinctrl_get_pins_count, |
| .get_pin_name = sunxi_pinctrl_get_pin_name, |
| .get_functions_count = sunxi_pinctrl_get_functions_count, |
| .get_function_name = sunxi_pinctrl_get_function_name, |
| .pinmux_set = sunxi_pinctrl_pinmux_set, |
| .pinconf_num_params = ARRAY_SIZE(sunxi_pinctrl_pinconf_params), |
| .pinconf_params = sunxi_pinctrl_pinconf_params, |
| .pinconf_set = sunxi_pinctrl_pinconf_set, |
| .set_state = pinctrl_generic_set_state, |
| .get_pin_muxing = sunxi_pinctrl_get_pin_muxing, |
| }; |
| |
| static int sunxi_pinctrl_bind(struct udevice *dev) |
| { |
| struct sunxi_pinctrl_plat *plat = dev_get_plat(dev); |
| struct sunxi_pinctrl_desc *desc; |
| struct sunxi_gpio_plat *gpio_plat; |
| struct udevice *gpio_dev; |
| int i, ret; |
| |
| desc = (void *)dev_get_driver_data(dev); |
| if (!desc) |
| return -EINVAL; |
| dev_set_priv(dev, desc); |
| |
| plat->base = dev_read_addr_ptr(dev); |
| |
| ret = device_bind_driver_to_node(dev, "gpio_sunxi", dev->name, |
| dev_ofnode(dev), &gpio_dev); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < desc->num_banks; ++i) { |
| gpio_plat = malloc(sizeof(*gpio_plat)); |
| if (!gpio_plat) |
| return -ENOMEM; |
| |
| gpio_plat->regs = plat->base + i; |
| gpio_plat->bank_name[0] = 'P'; |
| gpio_plat->bank_name[1] = 'A' + desc->first_bank + i; |
| gpio_plat->bank_name[2] = '\0'; |
| |
| ret = device_bind(gpio_dev, DM_DRIVER_REF(gpio_sunxi), |
| gpio_plat->bank_name, gpio_plat, |
| ofnode_null(), NULL); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int sunxi_pinctrl_probe(struct udevice *dev) |
| { |
| struct clk *apb_clk; |
| |
| apb_clk = devm_clk_get(dev, "apb"); |
| if (!IS_ERR(apb_clk)) |
| clk_enable(apb_clk); |
| |
| return 0; |
| } |
| |
| static const struct sunxi_pinctrl_function suniv_f1c100s_pinctrl_functions[] = { |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 3 }, /* PE11-PE12 */ |
| { "i2c1", 3 }, /* PD5-PD6 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 3 }, /* PC0-PC2 */ |
| { "spi0", 2 }, /* PC0-PC3 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 3 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 5 }, /* PE0-PE1 */ |
| #endif |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused suniv_f1c100s_pinctrl_desc = { |
| .functions = suniv_f1c100s_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(suniv_f1c100s_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 6, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun4i_a10_pinctrl_functions[] = { |
| { "emac", 2 }, /* PA0-PA17 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PB0-PB1 */ |
| { "i2c1", 2 }, /* PB18-PB19 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| #if IS_ENABLED(CONFIG_MMC1_PINS_PH) |
| { "mmc1", 5 }, /* PH22-PH27 */ |
| #else |
| { "mmc1", 4 }, /* PG0-PG5 */ |
| #endif |
| { "mmc2", 3 }, /* PC6-PC15 */ |
| { "mmc3", 2 }, /* PI4-PI9 */ |
| { "spi0", 3 }, /* PC0-PC2, PC23 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 4 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 2 }, /* PB22-PB23 */ |
| #endif |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun4i_a10_pinctrl_desc = { |
| .functions = sun4i_a10_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun4i_a10_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 9, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun5i_a13_pinctrl_functions[] = { |
| { "emac", 2 }, /* PA0-PA17 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PB0-PB1 */ |
| { "i2c1", 2 }, /* PB15-PB16 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG3-PG8 */ |
| { "mmc2", 3 }, /* PC6-PC15 */ |
| { "spi0", 3 }, /* PC0-PC3 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 4 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 2 }, /* PB19-PB20 */ |
| #endif |
| { "uart1", 4 }, /* PG3-PG4 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun5i_a13_pinctrl_desc = { |
| .functions = sun5i_a13_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun5i_a13_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 7, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun6i_a31_pinctrl_functions[] = { |
| { "gmac", 2 }, /* PA0-PA27 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PH14-PH15 */ |
| { "i2c1", 2 }, /* PH16-PH17 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG0-PG5 */ |
| { "mmc2", 3 }, /* PC6-PC15, PC24 */ |
| { "mmc3", 4 }, /* PC6-PC15, PC24 */ |
| { "spi0", 3 }, /* PC0-PC2, PC27 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 3 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 2 }, /* PH20-PH21 */ |
| #endif |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun6i_a31_pinctrl_desc = { |
| .functions = sun6i_a31_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun6i_a31_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 8, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun6i_a31_r_pinctrl_functions[] = { |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "s_i2c", 2 }, /* PL0-PL1 */ |
| { "s_uart", 2 }, /* PL2-PL3 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun6i_a31_r_pinctrl_desc = { |
| .functions = sun6i_a31_r_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun6i_a31_r_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_L, |
| .num_banks = 2, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun7i_a20_pinctrl_functions[] = { |
| { "emac", 2 }, /* PA0-PA17 */ |
| { "gmac", 5 }, /* PA0-PA17 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PB0-PB1 */ |
| { "i2c1", 2 }, /* PB18-PB19 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| #if IS_ENABLED(CONFIG_MMC1_PINS_PH) |
| { "mmc1", 5 }, /* PH22-PH27 */ |
| #else |
| { "mmc1", 4 }, /* PG0-PG5 */ |
| #endif |
| { "mmc2", 3 }, /* PC5-PC15, PC24 */ |
| { "spi0", 3 }, /* PC0-PC2, PC23 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 4 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 2 }, /* PB22-PB23 */ |
| #endif |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun7i_a20_pinctrl_desc = { |
| .functions = sun7i_a20_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun7i_a20_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 9, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun8i_a23_pinctrl_functions[] = { |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PH2-PH3 */ |
| { "i2c1", 2 }, /* PH4-PH5 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG0-PG5 */ |
| { "mmc2", 3 }, /* PC5-PC16 */ |
| { "spi0", 3 }, /* PC0-PC3 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 3 }, /* PF2-PF4 */ |
| #endif |
| { "uart1", 2 }, /* PG6-PG7 */ |
| { "uart2", 2 }, /* PB0-PB1 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a23_pinctrl_desc = { |
| .functions = sun8i_a23_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun8i_a23_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 8, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun8i_a23_r_pinctrl_functions[] = { |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "s_i2c", 3 }, /* PL0-PL1 */ |
| { "s_uart", 2 }, /* PL2-PL3 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a23_r_pinctrl_desc = { |
| .functions = sun8i_a23_r_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun8i_a23_r_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_L, |
| .num_banks = 1, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun8i_a33_pinctrl_functions[] = { |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PH2-PH3 */ |
| { "i2c1", 2 }, /* PH4-PH5 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG0-PG5 */ |
| { "mmc2", 3 }, /* PC5-PC16 */ |
| { "spi0", 3 }, /* PC0-PC3 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 3 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 3 }, /* PB0-PB1 */ |
| #endif |
| { "uart1", 2 }, /* PG6-PG7 */ |
| { "uart2", 2 }, /* PB0-PB1 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a33_pinctrl_desc = { |
| .functions = sun8i_a33_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun8i_a33_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 8, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun8i_a83t_pinctrl_functions[] = { |
| { "gmac", 4 }, /* PD2-PD23 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PH0-PH1 */ |
| { "i2c1", 2 }, /* PH2-PH3 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG0-PG5 */ |
| { "mmc2", 3 }, /* PC5-PC16 */ |
| { "spi0", 3 }, /* PC0-PC3 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 3 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 2 }, /* PB9-PB10 */ |
| #endif |
| { "uart1", 2 }, /* PG6-PG7 */ |
| { "uart2", 2 }, /* PB0-PB1 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a83t_pinctrl_desc = { |
| .functions = sun8i_a83t_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun8i_a83t_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 8, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun8i_a83t_r_pinctrl_functions[] = { |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "s_i2c", 2 }, /* PL8-PL9 */ |
| { "s_uart", 2 }, /* PL2-PL3 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun8i_a83t_r_pinctrl_desc = { |
| .functions = sun8i_a83t_r_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun8i_a83t_r_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_L, |
| .num_banks = 1, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun8i_h3_pinctrl_functions[] = { |
| { "emac", 2 }, /* PD0-PD17 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PA11-PA12 */ |
| { "i2c1", 3 }, /* PA18-PA19 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG0-PG5 */ |
| { "mmc2", 3 }, /* PC5-PC16 */ |
| { "spi0", 3 }, /* PC0-PC3 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 3 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 2 }, /* PA4-PA5 */ |
| #endif |
| { "uart1", 2 }, /* PG6-PG7 */ |
| { "uart2", 2 }, /* PA0-PA1 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun8i_h3_pinctrl_desc = { |
| .functions = sun8i_h3_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun8i_h3_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 7, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun8i_h3_r_pinctrl_functions[] = { |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "s_i2c", 2 }, /* PL0-PL1 */ |
| { "s_uart", 2 }, /* PL2-PL3 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun8i_h3_r_pinctrl_desc = { |
| .functions = sun8i_h3_r_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun8i_h3_r_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_L, |
| .num_banks = 1, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun8i_v3s_pinctrl_functions[] = { |
| { "emac", 4 }, /* PD0-PD17 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PB6-PB7 */ |
| { "i2c1", 2 }, /* PB8-PB9 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG0-PG5 */ |
| { "mmc2", 2 }, /* PC0-PC10 */ |
| { "spi0", 3 }, /* PC0-PC3 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 3 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 3 }, /* PB8-PB9 */ |
| #endif |
| { "uart1", 2 }, /* PG6-PG7 */ |
| { "uart2", 2 }, /* PB0-PB1 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun8i_v3s_pinctrl_desc = { |
| .functions = sun8i_v3s_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun8i_v3s_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 7, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun9i_a80_pinctrl_functions[] = { |
| { "gmac", 2 }, /* PA0-PA17 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PH0-PH1 */ |
| { "i2c1", 2 }, /* PH2-PH3 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG0-PG5 */ |
| { "mmc2", 3 }, /* PC6-PC16 */ |
| { "spi0", 3 }, /* PC0-PC2, PC19 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 4 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 2 }, /* PH12-PH13 */ |
| #endif |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun9i_a80_pinctrl_desc = { |
| .functions = sun9i_a80_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun9i_a80_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 8, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun9i_a80_r_pinctrl_functions[] = { |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "s_i2c0", 2 }, /* PN0-PN1 */ |
| { "s_i2c1", 3 }, /* PM8-PM9 */ |
| { "s_uart", 3 }, /* PL0-PL1 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun9i_a80_r_pinctrl_desc = { |
| .functions = sun9i_a80_r_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun9i_a80_r_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_L, |
| .num_banks = 3, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun50i_a64_pinctrl_functions[] = { |
| { "emac", 4 }, /* PD8-PD23 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PH0-PH1 */ |
| { "i2c1", 2 }, /* PH2-PH3 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG0-PG5 */ |
| { "mmc2", 3 }, /* PC1-PC16 */ |
| { "pwm", 2 }, /* PD22 */ |
| { "spi0", 4 }, /* PC0-PC3 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 3 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 4 }, /* PB8-PB9 */ |
| #endif |
| { "uart1", 2 }, /* PG6-PG7 */ |
| { "uart2", 2 }, /* PB0-PB1 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun50i_a64_pinctrl_desc = { |
| .functions = sun50i_a64_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun50i_a64_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 8, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun50i_a64_r_pinctrl_functions[] = { |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "s_i2c", 2 }, /* PL8-PL9 */ |
| { "s_uart", 2 }, /* PL2-PL3 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun50i_a64_r_pinctrl_desc = { |
| .functions = sun50i_a64_r_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun50i_a64_r_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_L, |
| .num_banks = 1, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun50i_h5_pinctrl_functions[] = { |
| { "emac", 2 }, /* PD0-PD17 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PA11-PA12 */ |
| { "i2c1", 3 }, /* PA18-PA19 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG0-PG5 */ |
| { "mmc2", 3 }, /* PC1-PC16 */ |
| { "spi0", 3 }, /* PC0-PC3 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 3 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 2 }, /* PA4-PA5 */ |
| #endif |
| { "uart1", 2 }, /* PG6-PG7 */ |
| { "uart2", 2 }, /* PA0-PA1 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h5_pinctrl_desc = { |
| .functions = sun50i_h5_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun50i_h5_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 7, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun50i_h6_pinctrl_functions[] = { |
| { "emac", 5 }, /* PD0-PD20 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "i2c0", 2 }, /* PD25-PD26 */ |
| { "i2c1", 4 }, /* PH5-PH6 */ |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG0-PG5 */ |
| { "mmc2", 3 }, /* PC1-PC14 */ |
| { "spi0", 4 }, /* PC0-PC7 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 3 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 2 }, /* PH0-PH1 */ |
| #endif |
| { "uart1", 2 }, /* PG6-PG7 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h6_pinctrl_desc = { |
| .functions = sun50i_h6_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun50i_h6_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 8, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun50i_h6_r_pinctrl_functions[] = { |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "s_i2c", 3 }, /* PL0-PL1 */ |
| { "s_uart", 2 }, /* PL2-PL3 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h6_r_pinctrl_desc = { |
| .functions = sun50i_h6_r_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun50i_h6_r_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_L, |
| .num_banks = 2, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun50i_h616_pinctrl_functions[] = { |
| { "emac0", 2 }, /* PI0-PI16 */ |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "mmc0", 2 }, /* PF0-PF5 */ |
| { "mmc1", 2 }, /* PG0-PG5 */ |
| { "mmc2", 3 }, /* PC0-PC16 */ |
| { "spi0", 4 }, /* PC0-PC7, PC15-PC16 */ |
| #if IS_ENABLED(CONFIG_UART0_PORT_F) |
| { "uart0", 3 }, /* PF2-PF4 */ |
| #else |
| { "uart0", 2 }, /* PH0-PH1 */ |
| #endif |
| { "uart1", 2 }, /* PG6-PG7 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h616_pinctrl_desc = { |
| .functions = sun50i_h616_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun50i_h616_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_A, |
| .num_banks = 9, |
| }; |
| |
| static const struct sunxi_pinctrl_function sun50i_h616_r_pinctrl_functions[] = { |
| { "gpio_in", 0 }, |
| { "gpio_out", 1 }, |
| { "s_i2c", 3 }, /* PL0-PL1 */ |
| { "s_uart", 2 }, /* PL2-PL3 */ |
| }; |
| |
| static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h616_r_pinctrl_desc = { |
| .functions = sun50i_h616_r_pinctrl_functions, |
| .num_functions = ARRAY_SIZE(sun50i_h616_r_pinctrl_functions), |
| .first_bank = SUNXI_GPIO_L, |
| .num_banks = 1, |
| }; |
| |
| static const struct udevice_id sunxi_pinctrl_ids[] = { |
| #ifdef CONFIG_PINCTRL_SUNIV_F1C100S |
| { |
| .compatible = "allwinner,suniv-f1c100s-pinctrl", |
| .data = (ulong)&suniv_f1c100s_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN4I_A10 |
| { |
| .compatible = "allwinner,sun4i-a10-pinctrl", |
| .data = (ulong)&sun4i_a10_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN5I_A13 |
| { |
| .compatible = "allwinner,sun5i-a10s-pinctrl", |
| .data = (ulong)&sun5i_a13_pinctrl_desc, |
| }, |
| { |
| .compatible = "allwinner,sun5i-a13-pinctrl", |
| .data = (ulong)&sun5i_a13_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN6I_A31 |
| { |
| .compatible = "allwinner,sun6i-a31-pinctrl", |
| .data = (ulong)&sun6i_a31_pinctrl_desc, |
| }, |
| { |
| .compatible = "allwinner,sun6i-a31s-pinctrl", |
| .data = (ulong)&sun6i_a31_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN6I_A31_R |
| { |
| .compatible = "allwinner,sun6i-a31-r-pinctrl", |
| .data = (ulong)&sun6i_a31_r_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN7I_A20 |
| { |
| .compatible = "allwinner,sun7i-a20-pinctrl", |
| .data = (ulong)&sun7i_a20_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN8I_A23 |
| { |
| .compatible = "allwinner,sun8i-a23-pinctrl", |
| .data = (ulong)&sun8i_a23_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN8I_A23_R |
| { |
| .compatible = "allwinner,sun8i-a23-r-pinctrl", |
| .data = (ulong)&sun8i_a23_r_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN8I_A33 |
| { |
| .compatible = "allwinner,sun8i-a33-pinctrl", |
| .data = (ulong)&sun8i_a33_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN8I_A83T |
| { |
| .compatible = "allwinner,sun8i-a83t-pinctrl", |
| .data = (ulong)&sun8i_a83t_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN8I_A83T_R |
| { |
| .compatible = "allwinner,sun8i-a83t-r-pinctrl", |
| .data = (ulong)&sun8i_a83t_r_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN8I_H3 |
| { |
| .compatible = "allwinner,sun8i-h3-pinctrl", |
| .data = (ulong)&sun8i_h3_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN8I_H3_R |
| { |
| .compatible = "allwinner,sun8i-h3-r-pinctrl", |
| .data = (ulong)&sun8i_h3_r_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN7I_A20 |
| { |
| .compatible = "allwinner,sun8i-r40-pinctrl", |
| .data = (ulong)&sun7i_a20_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN8I_V3S |
| { |
| .compatible = "allwinner,sun8i-v3-pinctrl", |
| .data = (ulong)&sun8i_v3s_pinctrl_desc, |
| }, |
| { |
| .compatible = "allwinner,sun8i-v3s-pinctrl", |
| .data = (ulong)&sun8i_v3s_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN9I_A80 |
| { |
| .compatible = "allwinner,sun9i-a80-pinctrl", |
| .data = (ulong)&sun9i_a80_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN9I_A80_R |
| { |
| .compatible = "allwinner,sun9i-a80-r-pinctrl", |
| .data = (ulong)&sun9i_a80_r_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN50I_A64 |
| { |
| .compatible = "allwinner,sun50i-a64-pinctrl", |
| .data = (ulong)&sun50i_a64_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN50I_A64_R |
| { |
| .compatible = "allwinner,sun50i-a64-r-pinctrl", |
| .data = (ulong)&sun50i_a64_r_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN50I_H5 |
| { |
| .compatible = "allwinner,sun50i-h5-pinctrl", |
| .data = (ulong)&sun50i_h5_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN50I_H6 |
| { |
| .compatible = "allwinner,sun50i-h6-pinctrl", |
| .data = (ulong)&sun50i_h6_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN50I_H6_R |
| { |
| .compatible = "allwinner,sun50i-h6-r-pinctrl", |
| .data = (ulong)&sun50i_h6_r_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN50I_H616 |
| { |
| .compatible = "allwinner,sun50i-h616-pinctrl", |
| .data = (ulong)&sun50i_h616_pinctrl_desc, |
| }, |
| #endif |
| #ifdef CONFIG_PINCTRL_SUN50I_H616_R |
| { |
| .compatible = "allwinner,sun50i-h616-r-pinctrl", |
| .data = (ulong)&sun50i_h616_r_pinctrl_desc, |
| }, |
| #endif |
| {} |
| }; |
| |
| U_BOOT_DRIVER(sunxi_pinctrl) = { |
| .name = "sunxi-pinctrl", |
| .id = UCLASS_PINCTRL, |
| .of_match = sunxi_pinctrl_ids, |
| .bind = sunxi_pinctrl_bind, |
| .probe = sunxi_pinctrl_probe, |
| .plat_auto = sizeof(struct sunxi_pinctrl_plat), |
| .ops = &sunxi_pinctrl_ops, |
| }; |