| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * ZynqMP clock driver |
| * |
| * Copyright (C) 2016 Xilinx, Inc. |
| */ |
| |
| #include <common.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <dm/device_compat.h> |
| #include <linux/bitops.h> |
| #include <clk-uclass.h> |
| #include <clk.h> |
| #include <zynqmp_firmware.h> |
| #include <asm/arch/sys_proto.h> |
| #include <dm.h> |
| #include <linux/err.h> |
| |
| static const resource_size_t zynqmp_crf_apb_clkc_base = 0xfd1a0020; |
| static const resource_size_t zynqmp_crl_apb_clkc_base = 0xff5e0020; |
| |
| /* Full power domain clocks */ |
| #define CRF_APB_APLL_CTRL (zynqmp_crf_apb_clkc_base + 0x00) |
| #define CRF_APB_DPLL_CTRL (zynqmp_crf_apb_clkc_base + 0x0c) |
| #define CRF_APB_VPLL_CTRL (zynqmp_crf_apb_clkc_base + 0x18) |
| #define CRF_APB_PLL_STATUS (zynqmp_crf_apb_clkc_base + 0x24) |
| #define CRF_APB_APLL_TO_LPD_CTRL (zynqmp_crf_apb_clkc_base + 0x28) |
| #define CRF_APB_DPLL_TO_LPD_CTRL (zynqmp_crf_apb_clkc_base + 0x2c) |
| #define CRF_APB_VPLL_TO_LPD_CTRL (zynqmp_crf_apb_clkc_base + 0x30) |
| /* Peripheral clocks */ |
| #define CRF_APB_ACPU_CTRL (zynqmp_crf_apb_clkc_base + 0x40) |
| #define CRF_APB_DBG_TRACE_CTRL (zynqmp_crf_apb_clkc_base + 0x44) |
| #define CRF_APB_DBG_FPD_CTRL (zynqmp_crf_apb_clkc_base + 0x48) |
| #define CRF_APB_DP_VIDEO_REF_CTRL (zynqmp_crf_apb_clkc_base + 0x50) |
| #define CRF_APB_DP_AUDIO_REF_CTRL (zynqmp_crf_apb_clkc_base + 0x54) |
| #define CRF_APB_DP_STC_REF_CTRL (zynqmp_crf_apb_clkc_base + 0x5c) |
| #define CRF_APB_DDR_CTRL (zynqmp_crf_apb_clkc_base + 0x60) |
| #define CRF_APB_GPU_REF_CTRL (zynqmp_crf_apb_clkc_base + 0x64) |
| #define CRF_APB_SATA_REF_CTRL (zynqmp_crf_apb_clkc_base + 0x80) |
| #define CRF_APB_PCIE_REF_CTRL (zynqmp_crf_apb_clkc_base + 0x94) |
| #define CRF_APB_GDMA_REF_CTRL (zynqmp_crf_apb_clkc_base + 0x98) |
| #define CRF_APB_DPDMA_REF_CTRL (zynqmp_crf_apb_clkc_base + 0x9c) |
| #define CRF_APB_TOPSW_MAIN_CTRL (zynqmp_crf_apb_clkc_base + 0xa0) |
| #define CRF_APB_TOPSW_LSBUS_CTRL (zynqmp_crf_apb_clkc_base + 0xa4) |
| #define CRF_APB_GTGREF0_REF_CTRL (zynqmp_crf_apb_clkc_base + 0xa8) |
| #define CRF_APB_DBG_TSTMP_CTRL (zynqmp_crf_apb_clkc_base + 0xd8) |
| |
| /* Low power domain clocks */ |
| #define CRL_APB_IOPLL_CTRL (zynqmp_crl_apb_clkc_base + 0x00) |
| #define CRL_APB_RPLL_CTRL (zynqmp_crl_apb_clkc_base + 0x10) |
| #define CRL_APB_PLL_STATUS (zynqmp_crl_apb_clkc_base + 0x20) |
| #define CRL_APB_IOPLL_TO_FPD_CTRL (zynqmp_crl_apb_clkc_base + 0x24) |
| #define CRL_APB_RPLL_TO_FPD_CTRL (zynqmp_crl_apb_clkc_base + 0x28) |
| /* Peripheral clocks */ |
| #define CRL_APB_USB3_DUAL_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x2c) |
| #define CRL_APB_GEM0_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x30) |
| #define CRL_APB_GEM1_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x34) |
| #define CRL_APB_GEM2_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x38) |
| #define CRL_APB_GEM3_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x3c) |
| #define CRL_APB_USB0_BUS_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x40) |
| #define CRL_APB_USB1_BUS_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x44) |
| #define CRL_APB_QSPI_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x48) |
| #define CRL_APB_SDIO0_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x4c) |
| #define CRL_APB_SDIO1_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x50) |
| #define CRL_APB_UART0_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x54) |
| #define CRL_APB_UART1_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x58) |
| #define CRL_APB_SPI0_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x5c) |
| #define CRL_APB_SPI1_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x60) |
| #define CRL_APB_CAN0_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x64) |
| #define CRL_APB_CAN1_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x68) |
| #define CRL_APB_CPU_R5_CTRL (zynqmp_crl_apb_clkc_base + 0x70) |
| #define CRL_APB_IOU_SWITCH_CTRL (zynqmp_crl_apb_clkc_base + 0x7c) |
| #define CRL_APB_CSU_PLL_CTRL (zynqmp_crl_apb_clkc_base + 0x80) |
| #define CRL_APB_PCAP_CTRL (zynqmp_crl_apb_clkc_base + 0x84) |
| #define CRL_APB_LPD_SWITCH_CTRL (zynqmp_crl_apb_clkc_base + 0x88) |
| #define CRL_APB_LPD_LSBUS_CTRL (zynqmp_crl_apb_clkc_base + 0x8c) |
| #define CRL_APB_DBG_LPD_CTRL (zynqmp_crl_apb_clkc_base + 0x90) |
| #define CRL_APB_NAND_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x94) |
| #define CRL_APB_ADMA_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x98) |
| #define CRL_APB_PL0_REF_CTRL (zynqmp_crl_apb_clkc_base + 0xa0) |
| #define CRL_APB_PL1_REF_CTRL (zynqmp_crl_apb_clkc_base + 0xa4) |
| #define CRL_APB_PL2_REF_CTRL (zynqmp_crl_apb_clkc_base + 0xa8) |
| #define CRL_APB_PL3_REF_CTRL (zynqmp_crl_apb_clkc_base + 0xac) |
| #define CRL_APB_PL0_THR_CNT (zynqmp_crl_apb_clkc_base + 0xb4) |
| #define CRL_APB_PL1_THR_CNT (zynqmp_crl_apb_clkc_base + 0xbc) |
| #define CRL_APB_PL2_THR_CNT (zynqmp_crl_apb_clkc_base + 0xc4) |
| #define CRL_APB_PL3_THR_CNT (zynqmp_crl_apb_clkc_base + 0xdc) |
| #define CRL_APB_GEM_TSU_REF_CTRL (zynqmp_crl_apb_clkc_base + 0xe0) |
| #define CRL_APB_DLL_REF_CTRL (zynqmp_crl_apb_clkc_base + 0xe4) |
| #define CRL_APB_AMS_REF_CTRL (zynqmp_crl_apb_clkc_base + 0xe8) |
| #define CRL_APB_I2C0_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x100) |
| #define CRL_APB_I2C1_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x104) |
| #define CRL_APB_TIMESTAMP_REF_CTRL (zynqmp_crl_apb_clkc_base + 0x108) |
| |
| #define ZYNQ_CLK_MAXDIV 0x3f |
| #define CLK_CTRL_DIV1_SHIFT 16 |
| #define CLK_CTRL_DIV1_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT) |
| #define CLK_CTRL_DIV0_SHIFT 8 |
| #define CLK_CTRL_DIV0_MASK (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT) |
| #define CLK_CTRL_SRCSEL_MASK 0x7 |
| #define PLLCTRL_FBDIV_MASK 0x7f00 |
| #define PLLCTRL_FBDIV_SHIFT 8 |
| #define PLLCTRL_RESET_MASK 1 |
| #define PLLCTRL_RESET_SHIFT 0 |
| #define PLLCTRL_BYPASS_MASK 0x8 |
| #define PLLCTRL_BYPASS_SHFT 3 |
| #define PLLCTRL_POST_SRC_SHFT 24 |
| #define PLLCTRL_POST_SRC_MASK (0x7 << PLLCTRL_POST_SRC_SHFT) |
| #define PLLCTRL_PRE_SRC_SHFT 20 |
| #define PLLCTRL_PRE_SRC_MASK (0x7 << PLLCTRL_PRE_SRC_SHFT) |
| |
| |
| #define NUM_MIO_PINS 77 |
| |
| enum zynqmp_clk { |
| iopll, rpll, |
| apll, dpll, vpll, |
| iopll_to_fpd, rpll_to_fpd, apll_to_lpd, dpll_to_lpd, vpll_to_lpd, |
| acpu, acpu_half, |
| dbg_fpd, dbg_lpd, dbg_trace, dbg_tstmp, |
| dp_video_ref, dp_audio_ref, |
| dp_stc_ref, gdma_ref, dpdma_ref, |
| ddr_ref, sata_ref, pcie_ref, |
| gpu_ref, gpu_pp0_ref, gpu_pp1_ref, |
| topsw_main, topsw_lsbus, |
| gtgref0_ref, |
| lpd_switch, lpd_lsbus, |
| usb0_bus_ref, usb1_bus_ref, usb3_dual_ref, usb0, usb1, |
| cpu_r5, cpu_r5_core, |
| csu_spb, csu_pll, pcap, |
| iou_switch, |
| gem_tsu_ref, gem_tsu, |
| gem0_tx, gem1_tx, gem2_tx, gem3_tx, |
| gem0_rx, gem1_rx, gem2_rx, gem3_rx, |
| qspi_ref, |
| sdio0_ref, sdio1_ref, |
| uart0_ref, uart1_ref, |
| spi0_ref, spi1_ref, |
| nand_ref, |
| i2c0_ref, i2c1_ref, can0_ref, can1_ref, can0, can1, |
| dll_ref, |
| adma_ref, |
| timestamp_ref, |
| ams_ref, |
| pl0, pl1, pl2, pl3, |
| wdt, |
| gem0_ref = 104, |
| gem1_ref, gem2_ref, gem3_ref, |
| clk_max, |
| }; |
| |
| static const char * const clk_names[clk_max] = { |
| "iopll", "rpll", "apll", "dpll", |
| "vpll", "iopll_to_fpd", "rpll_to_fpd", |
| "apll_to_lpd", "dpll_to_lpd", "vpll_to_lpd", |
| "acpu", "acpu_half", "dbg_fpd", "dbg_lpd", |
| "dbg_trace", "dbg_tstmp", "dp_video_ref", |
| "dp_audio_ref", "dp_stc_ref", "gdma_ref", |
| "dpdma_ref", "ddr_ref", "sata_ref", "pcie_ref", |
| "gpu_ref", "gpu_pp0_ref", "gpu_pp1_ref", |
| "topsw_main", "topsw_lsbus", "gtgref0_ref", |
| "lpd_switch", "lpd_lsbus", "usb0_bus_ref", |
| "usb1_bus_ref", "usb3_dual_ref", "usb0", |
| "usb1", "cpu_r5", "cpu_r5_core", "csu_spb", |
| "csu_pll", "pcap", "iou_switch", "gem_tsu_ref", |
| "gem_tsu", "gem0_tx", "gem1_tx", "gem2_tx", |
| "gem3_tx", "gem0_rx", "gem1_rx", "gem2_rx", |
| "gem3_rx", "qspi_ref", "sdio0_ref", "sdio1_ref", |
| "uart0_ref", "uart1_ref", "spi0_ref", |
| "spi1_ref", "nand_ref", "i2c0_ref", "i2c1_ref", |
| "can0_ref", "can1_ref", "can0", "can1", |
| "dll_ref", "adma_ref", "timestamp_ref", |
| "ams_ref", "pl0", "pl1", "pl2", "pl3", "wdt", |
| NULL, NULL, NULL, NULL, |
| NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, |
| NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, |
| NULL, NULL, NULL, NULL, "gem0_ref", "gem1_ref", "gem2_ref", "gem3_ref", |
| }; |
| |
| static const u32 pll_src[][4] = { |
| {apll, 0xff, dpll, vpll}, /* acpu */ |
| {dpll, vpll, 0xff, 0xff}, /* ddr_ref */ |
| {rpll, iopll, 0xff, 0xff}, /* dll_ref */ |
| {iopll, 0xff, rpll, dpll_to_lpd}, /* gem_tsu_ref */ |
| {iopll, 0xff, rpll, dpll}, /* peripheral */ |
| {apll, 0xff, iopll_to_fpd, dpll}, /* wdt */ |
| {iopll_to_fpd, 0xff, dpll, apll}, /* dbg_fpd */ |
| {iopll, 0xff, rpll, dpll_to_lpd}, /* timestamp_ref */ |
| {iopll_to_fpd, 0xff, apll, dpll}, /* sata_ref */ |
| {iopll_to_fpd, 0xff, rpll_to_fpd, dpll},/* pcie_ref */ |
| {iopll_to_fpd, 0xff, vpll, dpll}, /* gpu_ref */ |
| {apll, 0xff, vpll, dpll}, /* topsw_main_ref */ |
| {rpll, 0xff, iopll, dpll_to_lpd}, /* cpu_r5_ref */ |
| }; |
| |
| enum zynqmp_clk_pll_src { |
| ACPU_CLK_SRC = 0, |
| DDR_CLK_SRC, |
| DLL_CLK_SRC, |
| GEM_TSU_CLK_SRC, |
| PERI_CLK_SRC, |
| WDT_CLK_SRC, |
| DBG_FPD_CLK_SRC, |
| TIMESTAMP_CLK_SRC, |
| SATA_CLK_SRC, |
| PCIE_CLK_SRC, |
| GPU_CLK_SRC, |
| TOPSW_MAIN_CLK_SRC, |
| CPU_R5_CLK_SRC |
| }; |
| |
| struct zynqmp_clk_priv { |
| unsigned long ps_clk_freq; |
| unsigned long video_clk; |
| unsigned long pss_alt_ref_clk; |
| unsigned long gt_crx_ref_clk; |
| unsigned long aux_ref_clk; |
| }; |
| |
| static u32 zynqmp_clk_get_register(enum zynqmp_clk id) |
| { |
| switch (id) { |
| case iopll: |
| return CRL_APB_IOPLL_CTRL; |
| case rpll: |
| return CRL_APB_RPLL_CTRL; |
| case apll: |
| return CRF_APB_APLL_CTRL; |
| case dpll: |
| return CRF_APB_DPLL_CTRL; |
| case vpll: |
| return CRF_APB_VPLL_CTRL; |
| case acpu: |
| return CRF_APB_ACPU_CTRL; |
| case dbg_fpd: |
| return CRF_APB_DBG_FPD_CTRL; |
| case dbg_trace: |
| return CRF_APB_DBG_TRACE_CTRL; |
| case dbg_tstmp: |
| return CRF_APB_DBG_TSTMP_CTRL; |
| case dp_video_ref: |
| return CRF_APB_DP_VIDEO_REF_CTRL; |
| case dp_audio_ref: |
| return CRF_APB_DP_AUDIO_REF_CTRL; |
| case dp_stc_ref: |
| return CRF_APB_DP_STC_REF_CTRL; |
| case gpu_ref ... gpu_pp1_ref: |
| return CRF_APB_GPU_REF_CTRL; |
| case ddr_ref: |
| return CRF_APB_DDR_CTRL; |
| case sata_ref: |
| return CRF_APB_SATA_REF_CTRL; |
| case pcie_ref: |
| return CRF_APB_PCIE_REF_CTRL; |
| case gdma_ref: |
| return CRF_APB_GDMA_REF_CTRL; |
| case dpdma_ref: |
| return CRF_APB_DPDMA_REF_CTRL; |
| case topsw_main: |
| return CRF_APB_TOPSW_MAIN_CTRL; |
| case topsw_lsbus: |
| return CRF_APB_TOPSW_LSBUS_CTRL; |
| case lpd_switch: |
| return CRL_APB_LPD_SWITCH_CTRL; |
| case lpd_lsbus: |
| return CRL_APB_LPD_LSBUS_CTRL; |
| case qspi_ref: |
| return CRL_APB_QSPI_REF_CTRL; |
| case usb3_dual_ref: |
| return CRL_APB_USB3_DUAL_REF_CTRL; |
| case gem_tsu_ref: |
| return CRL_APB_GEM_TSU_REF_CTRL; |
| case gem0_tx: |
| case gem0_ref: |
| return CRL_APB_GEM0_REF_CTRL; |
| case gem1_tx: |
| case gem1_ref: |
| return CRL_APB_GEM1_REF_CTRL; |
| case gem2_tx: |
| case gem2_ref: |
| return CRL_APB_GEM2_REF_CTRL; |
| case gem3_tx: |
| case gem3_ref: |
| return CRL_APB_GEM3_REF_CTRL; |
| case usb0_bus_ref: |
| return CRL_APB_USB0_BUS_REF_CTRL; |
| case usb1_bus_ref: |
| return CRL_APB_USB1_BUS_REF_CTRL; |
| case cpu_r5: |
| return CRL_APB_CPU_R5_CTRL; |
| case uart0_ref: |
| return CRL_APB_UART0_REF_CTRL; |
| case uart1_ref: |
| return CRL_APB_UART1_REF_CTRL; |
| case sdio0_ref: |
| return CRL_APB_SDIO0_REF_CTRL; |
| case sdio1_ref: |
| return CRL_APB_SDIO1_REF_CTRL; |
| case spi0_ref: |
| return CRL_APB_SPI0_REF_CTRL; |
| case spi1_ref: |
| return CRL_APB_SPI1_REF_CTRL; |
| case nand_ref: |
| return CRL_APB_NAND_REF_CTRL; |
| case i2c0_ref: |
| return CRL_APB_I2C0_REF_CTRL; |
| case i2c1_ref: |
| return CRL_APB_I2C1_REF_CTRL; |
| case can0_ref: |
| return CRL_APB_CAN0_REF_CTRL; |
| case can1_ref: |
| return CRL_APB_CAN1_REF_CTRL; |
| case dll_ref: |
| return CRL_APB_DLL_REF_CTRL; |
| case adma_ref: |
| return CRL_APB_ADMA_REF_CTRL; |
| case timestamp_ref: |
| return CRL_APB_TIMESTAMP_REF_CTRL; |
| case ams_ref: |
| return CRL_APB_AMS_REF_CTRL; |
| case pl0: |
| return CRL_APB_PL0_REF_CTRL; |
| case pl1: |
| return CRL_APB_PL1_REF_CTRL; |
| case pl2: |
| return CRL_APB_PL2_REF_CTRL; |
| case pl3: |
| return CRL_APB_PL3_REF_CTRL; |
| case wdt: |
| return CRF_APB_TOPSW_LSBUS_CTRL; |
| case iopll_to_fpd: |
| return CRL_APB_IOPLL_TO_FPD_CTRL; |
| default: |
| debug("Invalid clk id%d\n", id); |
| } |
| return 0; |
| } |
| |
| static ulong zynqmp_clk_get_pll_src(ulong clk_ctrl, |
| struct zynqmp_clk_priv *priv, |
| bool is_pre_src) |
| { |
| u32 src_sel; |
| |
| if (is_pre_src) |
| src_sel = (clk_ctrl & PLLCTRL_PRE_SRC_MASK) >> |
| PLLCTRL_PRE_SRC_SHFT; |
| else |
| src_sel = (clk_ctrl & PLLCTRL_POST_SRC_MASK) >> |
| PLLCTRL_POST_SRC_SHFT; |
| |
| switch (src_sel) { |
| case 4: |
| return priv->video_clk; |
| case 5: |
| return priv->pss_alt_ref_clk; |
| case 6: |
| return priv->aux_ref_clk; |
| case 7: |
| return priv->gt_crx_ref_clk; |
| case 0 ... 3: |
| default: |
| return priv->ps_clk_freq; |
| } |
| } |
| |
| static ulong zynqmp_clk_get_pll_rate(struct zynqmp_clk_priv *priv, |
| enum zynqmp_clk id) |
| { |
| u32 clk_ctrl, reset, mul; |
| ulong freq; |
| int ret; |
| |
| ret = zynqmp_mmio_read(zynqmp_clk_get_register(id), &clk_ctrl); |
| if (ret) { |
| printf("%s mio read fail\n", __func__); |
| return -EIO; |
| } |
| |
| if (clk_ctrl & PLLCTRL_BYPASS_MASK) |
| freq = zynqmp_clk_get_pll_src(clk_ctrl, priv, 0); |
| else |
| freq = zynqmp_clk_get_pll_src(clk_ctrl, priv, 1); |
| |
| reset = (clk_ctrl & PLLCTRL_RESET_MASK) >> PLLCTRL_RESET_SHIFT; |
| if (reset && !(clk_ctrl & PLLCTRL_BYPASS_MASK)) |
| return 0; |
| |
| mul = (clk_ctrl & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT; |
| |
| freq *= mul; |
| |
| if (clk_ctrl & (1 << 16)) |
| freq /= 2; |
| |
| return freq; |
| } |
| |
| static ulong zynqmp_clk_get_cpu_rate(struct zynqmp_clk_priv *priv, |
| enum zynqmp_clk id) |
| { |
| u32 clk_ctrl, div, srcsel; |
| enum zynqmp_clk pll; |
| int ret; |
| unsigned long pllrate; |
| |
| ret = zynqmp_mmio_read(CRF_APB_ACPU_CTRL, &clk_ctrl); |
| if (ret) { |
| printf("%s mio read fail\n", __func__); |
| return -EIO; |
| } |
| |
| div = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; |
| |
| srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK; |
| pll = pll_src[ACPU_CLK_SRC][srcsel]; |
| pllrate = zynqmp_clk_get_pll_rate(priv, pll); |
| if (IS_ERR_VALUE(pllrate)) |
| return pllrate; |
| |
| return DIV_ROUND_CLOSEST(pllrate, div); |
| } |
| |
| static ulong zynqmp_clk_get_ddr_rate(struct zynqmp_clk_priv *priv) |
| { |
| u32 clk_ctrl, div, srcsel; |
| enum zynqmp_clk pll; |
| int ret; |
| ulong pllrate; |
| |
| ret = zynqmp_mmio_read(CRF_APB_DDR_CTRL, &clk_ctrl); |
| if (ret) { |
| printf("%s mio read fail\n", __func__); |
| return -EIO; |
| } |
| |
| div = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; |
| |
| srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK; |
| pll = pll_src[DDR_CLK_SRC][srcsel]; |
| pllrate = zynqmp_clk_get_pll_rate(priv, pll); |
| if (IS_ERR_VALUE(pllrate)) |
| return pllrate; |
| |
| return DIV_ROUND_CLOSEST(pllrate, div); |
| } |
| |
| static ulong zynqmp_clk_get_dll_rate(struct zynqmp_clk_priv *priv) |
| { |
| u32 clk_ctrl, srcsel; |
| enum zynqmp_clk pll; |
| ulong pllrate; |
| int ret; |
| |
| ret = zynqmp_mmio_read(CRL_APB_DLL_REF_CTRL, &clk_ctrl); |
| if (ret) { |
| printf("%s mio read fail\n", __func__); |
| return -EIO; |
| } |
| |
| srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK; |
| pll = pll_src[DLL_CLK_SRC][srcsel]; |
| pllrate = zynqmp_clk_get_pll_rate(priv, pll); |
| if (IS_ERR_VALUE(pllrate)) |
| return pllrate; |
| |
| return pllrate; |
| } |
| |
| static ulong zynqmp_clk_get_peripheral_rate(struct zynqmp_clk_priv *priv, |
| enum zynqmp_clk id, bool two_divs) |
| { |
| enum zynqmp_clk pll; |
| u32 clk_ctrl, div0, srcsel; |
| u32 div1 = 1; |
| int ret; |
| ulong pllrate; |
| |
| ret = zynqmp_mmio_read(zynqmp_clk_get_register(id), &clk_ctrl); |
| if (ret) { |
| printf("%s mio read fail\n", __func__); |
| return -EIO; |
| } |
| |
| div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; |
| if (!div0) |
| div0 = 1; |
| |
| if (two_divs) { |
| div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT; |
| if (!div1) |
| div1 = 1; |
| } |
| srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK; |
| |
| if (id == gem_tsu_ref) |
| pll = pll_src[GEM_TSU_CLK_SRC][srcsel]; |
| else |
| pll = pll_src[PERI_CLK_SRC][srcsel]; |
| |
| pllrate = zynqmp_clk_get_pll_rate(priv, pll); |
| if (IS_ERR_VALUE(pllrate)) |
| return pllrate; |
| |
| return |
| DIV_ROUND_CLOSEST( |
| DIV_ROUND_CLOSEST(pllrate, div0), div1); |
| } |
| |
| static ulong zynqmp_clk_get_crf_crl_rate(struct zynqmp_clk_priv *priv, |
| enum zynqmp_clk id, bool two_divs) |
| { |
| enum zynqmp_clk pll; |
| u32 clk_ctrl, div0, srcsel; |
| u32 div1 = 1; |
| int ret; |
| ulong pllrate; |
| |
| ret = zynqmp_mmio_read(zynqmp_clk_get_register(id), &clk_ctrl); |
| if (ret) { |
| printf("%d %s mio read fail\n", __LINE__, __func__); |
| return -EIO; |
| } |
| |
| div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; |
| if (!div0) |
| div0 = 1; |
| srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK; |
| |
| switch (id) { |
| case wdt: |
| case dbg_trace: |
| case topsw_lsbus: |
| pll = pll_src[WDT_CLK_SRC][srcsel]; |
| break; |
| case dbg_fpd: |
| case dbg_tstmp: |
| pll = pll_src[DBG_FPD_CLK_SRC][srcsel]; |
| break; |
| case timestamp_ref: |
| pll = pll_src[TIMESTAMP_CLK_SRC][srcsel]; |
| break; |
| case sata_ref: |
| pll = pll_src[SATA_CLK_SRC][srcsel]; |
| break; |
| case pcie_ref: |
| pll = pll_src[PCIE_CLK_SRC][srcsel]; |
| break; |
| case gpu_ref ... gpu_pp1_ref: |
| pll = pll_src[GPU_CLK_SRC][srcsel]; |
| break; |
| case gdma_ref: |
| case dpdma_ref: |
| case topsw_main: |
| pll = pll_src[TOPSW_MAIN_CLK_SRC][srcsel]; |
| break; |
| case cpu_r5: |
| case ams_ref: |
| case adma_ref: |
| case lpd_lsbus: |
| case lpd_switch: |
| pll = pll_src[CPU_R5_CLK_SRC][srcsel]; |
| break; |
| default: |
| return -ENXIO; |
| } |
| if (two_divs) { |
| ret = zynqmp_mmio_read(zynqmp_clk_get_register(pll), &clk_ctrl); |
| if (ret) { |
| printf("%d %s mio read fail\n", __LINE__, __func__); |
| return -EIO; |
| } |
| div1 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT; |
| if (!div1) |
| div1 = 1; |
| } |
| |
| if (pll == iopll_to_fpd) |
| pll = iopll; |
| |
| pllrate = zynqmp_clk_get_pll_rate(priv, pll); |
| if (IS_ERR_VALUE(pllrate)) |
| return pllrate; |
| |
| return |
| DIV_ROUND_CLOSEST( |
| DIV_ROUND_CLOSEST(pllrate, div0), div1); |
| } |
| |
| static unsigned long zynqmp_clk_calc_peripheral_two_divs(ulong rate, |
| ulong pll_rate, |
| u32 *div0, u32 *div1) |
| { |
| long new_err, best_err = (long)(~0UL >> 1); |
| ulong new_rate, best_rate = 0; |
| u32 d0, d1; |
| |
| for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) { |
| for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) { |
| new_rate = DIV_ROUND_CLOSEST( |
| DIV_ROUND_CLOSEST(pll_rate, d0), d1); |
| new_err = abs(new_rate - rate); |
| |
| if (new_err < best_err) { |
| *div0 = d0; |
| *div1 = d1; |
| best_err = new_err; |
| best_rate = new_rate; |
| } |
| } |
| } |
| |
| return best_rate; |
| } |
| |
| static ulong zynqmp_clk_set_peripheral_rate(struct zynqmp_clk_priv *priv, |
| enum zynqmp_clk id, ulong rate, |
| bool two_divs) |
| { |
| enum zynqmp_clk pll; |
| u32 clk_ctrl, div0 = 0, div1 = 0; |
| ulong pll_rate, new_rate; |
| u32 reg, srcsel; |
| int ret; |
| u32 mask; |
| |
| reg = zynqmp_clk_get_register(id); |
| ret = zynqmp_mmio_read(reg, &clk_ctrl); |
| if (ret) { |
| printf("%s mio read fail\n", __func__); |
| return -EIO; |
| } |
| |
| srcsel = clk_ctrl & CLK_CTRL_SRCSEL_MASK; |
| pll = pll_src[PERI_CLK_SRC][srcsel]; |
| pll_rate = zynqmp_clk_get_pll_rate(priv, pll); |
| if (IS_ERR_VALUE(pll_rate)) |
| return pll_rate; |
| |
| clk_ctrl &= ~CLK_CTRL_DIV0_MASK; |
| if (two_divs) { |
| clk_ctrl &= ~CLK_CTRL_DIV1_MASK; |
| new_rate = zynqmp_clk_calc_peripheral_two_divs(rate, pll_rate, |
| &div0, &div1); |
| clk_ctrl |= div1 << CLK_CTRL_DIV1_SHIFT; |
| } else { |
| div0 = DIV_ROUND_CLOSEST(pll_rate, rate); |
| if (div0 > ZYNQ_CLK_MAXDIV) |
| div0 = ZYNQ_CLK_MAXDIV; |
| new_rate = DIV_ROUND_CLOSEST(rate, div0); |
| } |
| clk_ctrl |= div0 << CLK_CTRL_DIV0_SHIFT; |
| |
| mask = (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT) | |
| (ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT); |
| |
| ret = zynqmp_mmio_write(reg, mask, clk_ctrl); |
| if (ret) { |
| printf("%s mio write fail\n", __func__); |
| return -EIO; |
| } |
| |
| return new_rate; |
| } |
| |
| static ulong zynqmp_clk_get_rate(struct clk *clk) |
| { |
| struct zynqmp_clk_priv *priv = dev_get_priv(clk->dev); |
| enum zynqmp_clk id = clk->id; |
| bool two_divs = false; |
| |
| switch (id) { |
| case iopll ... vpll: |
| return zynqmp_clk_get_pll_rate(priv, id); |
| case acpu: |
| return zynqmp_clk_get_cpu_rate(priv, id); |
| case ddr_ref: |
| return zynqmp_clk_get_ddr_rate(priv); |
| case dll_ref: |
| return zynqmp_clk_get_dll_rate(priv); |
| case gem_tsu_ref: |
| case dp_video_ref ... dp_stc_ref: |
| case pl0 ... pl3: |
| case gem0_ref ... gem3_ref: |
| case gem0_tx ... gem3_tx: |
| case qspi_ref ... can1_ref: |
| case usb0_bus_ref ... usb3_dual_ref: |
| two_divs = true; |
| return zynqmp_clk_get_peripheral_rate(priv, id, two_divs); |
| case wdt: |
| case topsw_lsbus: |
| case sata_ref ... gpu_pp1_ref: |
| two_divs = true; |
| fallthrough; |
| case cpu_r5: |
| case dbg_fpd: |
| case ams_ref: |
| case adma_ref: |
| case lpd_lsbus: |
| case dbg_trace: |
| case dbg_tstmp: |
| case lpd_switch: |
| case topsw_main: |
| case timestamp_ref: |
| case gdma_ref ... dpdma_ref: |
| return zynqmp_clk_get_crf_crl_rate(priv, id, two_divs); |
| default: |
| return -ENXIO; |
| } |
| } |
| |
| static ulong zynqmp_clk_set_rate(struct clk *clk, ulong rate) |
| { |
| struct zynqmp_clk_priv *priv = dev_get_priv(clk->dev); |
| enum zynqmp_clk id = clk->id; |
| bool two_divs = true; |
| |
| switch (id) { |
| case gem0_ref ... gem3_ref: |
| case gem0_tx ... gem3_tx: |
| case qspi_ref ... can1_ref: |
| case usb0_bus_ref ... usb3_dual_ref: |
| return zynqmp_clk_set_peripheral_rate(priv, id, |
| rate, two_divs); |
| default: |
| return -ENXIO; |
| } |
| } |
| |
| int soc_clk_dump(void) |
| { |
| struct udevice *dev; |
| int i, ret; |
| |
| ret = uclass_get_device_by_driver(UCLASS_CLK, |
| DM_DRIVER_GET(zynqmp_clk), &dev); |
| if (ret) |
| return ret; |
| |
| printf("clk\t\tfrequency\n"); |
| for (i = 0; i < clk_max; i++) { |
| const char *name = clk_names[i]; |
| if (name) { |
| struct clk clk; |
| unsigned long rate; |
| |
| clk.id = i; |
| ret = clk_request(dev, &clk); |
| if (ret < 0) |
| return ret; |
| |
| rate = clk_get_rate(&clk); |
| |
| clk_free(&clk); |
| |
| if ((rate == (unsigned long)-ENOSYS) || |
| (rate == (unsigned long)-ENXIO) || |
| (rate == (unsigned long)-EIO)) |
| printf("%10s%20s\n", name, "unknown"); |
| else |
| printf("%10s%20lu\n", name, rate); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int zynqmp_get_freq_by_name(char *name, struct udevice *dev, ulong *freq) |
| { |
| struct clk clk; |
| int ret; |
| |
| ret = clk_get_by_name(dev, name, &clk); |
| if (ret < 0) { |
| dev_err(dev, "failed to get %s\n", name); |
| return ret; |
| } |
| |
| *freq = clk_get_rate(&clk); |
| if (IS_ERR_VALUE(*freq)) { |
| dev_err(dev, "failed to get rate %s\n", name); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| static int zynqmp_clk_probe(struct udevice *dev) |
| { |
| int ret; |
| struct zynqmp_clk_priv *priv = dev_get_priv(dev); |
| |
| debug("%s\n", __func__); |
| ret = zynqmp_get_freq_by_name("pss_ref_clk", dev, &priv->ps_clk_freq); |
| if (ret < 0) |
| return -EINVAL; |
| |
| ret = zynqmp_get_freq_by_name("video_clk", dev, &priv->video_clk); |
| if (ret < 0) |
| return -EINVAL; |
| |
| ret = zynqmp_get_freq_by_name("pss_alt_ref_clk", dev, |
| &priv->pss_alt_ref_clk); |
| if (ret < 0) |
| return -EINVAL; |
| |
| ret = zynqmp_get_freq_by_name("aux_ref_clk", dev, &priv->aux_ref_clk); |
| if (ret < 0) |
| return -EINVAL; |
| |
| ret = zynqmp_get_freq_by_name("gt_crx_ref_clk", dev, |
| &priv->gt_crx_ref_clk); |
| if (ret < 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int zynqmp_clk_enable(struct clk *clk) |
| { |
| enum zynqmp_clk id = clk->id; |
| u32 reg, clk_ctrl, clkact_shift, mask; |
| int ret; |
| |
| reg = zynqmp_clk_get_register(id); |
| debug("%s, clk_id:%x, clk_base:0x%x\n", __func__, id, reg); |
| |
| switch (id) { |
| case usb0_bus_ref ... usb1: |
| clkact_shift = 25; |
| mask = 0x1; |
| break; |
| case gem0_tx ... gem3_tx: |
| case gem0_ref ... gem3_ref: |
| clkact_shift = 25; |
| mask = 0x3; |
| break; |
| case qspi_ref ... can1_ref: |
| case lpd_lsbus: |
| clkact_shift = 24; |
| mask = 0x1; |
| break; |
| default: |
| return -ENXIO; |
| } |
| |
| ret = zynqmp_mmio_read(reg, &clk_ctrl); |
| if (ret) { |
| printf("%s mio read fail\n", __func__); |
| return -EIO; |
| } |
| |
| clk_ctrl |= (mask << clkact_shift); |
| ret = zynqmp_mmio_write(reg, mask << clkact_shift, clk_ctrl); |
| if (ret) { |
| printf("%s mio write fail\n", __func__); |
| return -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static struct clk_ops zynqmp_clk_ops = { |
| .set_rate = zynqmp_clk_set_rate, |
| .get_rate = zynqmp_clk_get_rate, |
| .enable = zynqmp_clk_enable, |
| }; |
| |
| static const struct udevice_id zynqmp_clk_ids[] = { |
| { .compatible = "xlnx,zynqmp-clk" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(zynqmp_clk) = { |
| .name = "zynqmp_clk", |
| .id = UCLASS_CLK, |
| .of_match = zynqmp_clk_ids, |
| .probe = zynqmp_clk_probe, |
| .ops = &zynqmp_clk_ops, |
| .priv_auto = sizeof(struct zynqmp_clk_priv), |
| }; |