| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2002 |
| * Richard Jones, rjones@nexus-tech.net |
| */ |
| |
| /* |
| * Boot support |
| */ |
| #include <common.h> |
| #include <mapmem.h> |
| #include <fat.h> |
| #include <fs.h> |
| #include <asm/cache.h> |
| |
| int do_fat_size(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| return do_size(cmdtp, flag, argc, argv, FS_TYPE_FAT); |
| } |
| |
| U_BOOT_CMD( |
| fatsize, 4, 0, do_fat_size, |
| "determine a file's size", |
| "<interface> <dev[:part]> <filename>\n" |
| " - Find file 'filename' from 'dev' on 'interface'\n" |
| " and determine its size." |
| ); |
| |
| int do_fat_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| return do_load(cmdtp, flag, argc, argv, FS_TYPE_FAT); |
| } |
| |
| |
| U_BOOT_CMD( |
| fatload, 7, 0, do_fat_fsload, |
| "load binary file from a dos filesystem", |
| "<interface> [<dev[:part]> [<addr> [<filename> [bytes [pos]]]]]\n" |
| " - Load binary file 'filename' from 'dev' on 'interface'\n" |
| " to address 'addr' from dos filesystem.\n" |
| " 'pos' gives the file position to start loading from.\n" |
| " If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n" |
| " 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n" |
| " the load stops on end of file.\n" |
| " If either 'pos' or 'bytes' are not aligned to\n" |
| " ARCH_DMA_MINALIGN then a misaligned buffer warning will\n" |
| " be printed and performance will suffer for the load." |
| ); |
| |
| static int do_fat_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| return do_ls(cmdtp, flag, argc, argv, FS_TYPE_FAT); |
| } |
| |
| U_BOOT_CMD( |
| fatls, 4, 1, do_fat_ls, |
| "list files in a directory (default /)", |
| "<interface> [<dev[:part]>] [directory]\n" |
| " - list files from 'dev' on 'interface' in a 'directory'" |
| ); |
| |
| static int do_fat_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| int dev, part; |
| struct blk_desc *dev_desc; |
| disk_partition_t info; |
| |
| if (argc < 2) { |
| printf("usage: fatinfo <interface> [<dev[:part]>]\n"); |
| return 0; |
| } |
| |
| part = blk_get_device_part_str(argv[1], argv[2], &dev_desc, &info, 1); |
| if (part < 0) |
| return 1; |
| |
| dev = dev_desc->devnum; |
| if (fat_set_blk_dev(dev_desc, &info) != 0) { |
| printf("\n** Unable to use %s %d:%d for fatinfo **\n", |
| argv[1], dev, part); |
| return 1; |
| } |
| return file_fat_detectfs(); |
| } |
| |
| U_BOOT_CMD( |
| fatinfo, 3, 1, do_fat_fsinfo, |
| "print information about filesystem", |
| "<interface> [<dev[:part]>]\n" |
| " - print information about filesystem from 'dev' on 'interface'" |
| ); |
| |
| #ifdef CONFIG_FAT_WRITE |
| static int do_fat_fswrite(cmd_tbl_t *cmdtp, int flag, |
| int argc, char * const argv[]) |
| { |
| loff_t size; |
| int ret; |
| unsigned long addr; |
| unsigned long count; |
| long offset; |
| struct blk_desc *dev_desc = NULL; |
| disk_partition_t info; |
| int dev = 0; |
| int part = 1; |
| void *buf; |
| |
| if (argc < 5) |
| return cmd_usage(cmdtp); |
| |
| part = blk_get_device_part_str(argv[1], argv[2], &dev_desc, &info, 1); |
| if (part < 0) |
| return 1; |
| |
| dev = dev_desc->devnum; |
| |
| if (fat_set_blk_dev(dev_desc, &info) != 0) { |
| printf("\n** Unable to use %s %d:%d for fatwrite **\n", |
| argv[1], dev, part); |
| return 1; |
| } |
| addr = simple_strtoul(argv[3], NULL, 16); |
| count = (argc <= 5) ? 0 : simple_strtoul(argv[5], NULL, 16); |
| /* offset should be a hex, but "-1" is allowed */ |
| offset = (argc <= 6) ? 0 : simple_strtol(argv[6], NULL, 16); |
| |
| buf = map_sysmem(addr, count); |
| ret = file_fat_write(argv[4], buf, offset, count, &size); |
| unmap_sysmem(buf); |
| if (ret < 0) { |
| printf("\n** Unable to write \"%s\" from %s %d:%d **\n", |
| argv[4], argv[1], dev, part); |
| return 1; |
| } |
| |
| printf("%llu bytes written\n", size); |
| |
| return 0; |
| } |
| |
| U_BOOT_CMD( |
| fatwrite, 7, 0, do_fat_fswrite, |
| "write file into a dos filesystem", |
| "<interface> <dev[:part]> <addr> <filename> [<bytes> [<offset>]]\n" |
| " - write file 'filename' from the address 'addr' in RAM\n" |
| " to 'dev' on 'interface'" |
| ); |
| |
| static int do_fat_rm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| return do_rm(cmdtp, flag, argc, argv, FS_TYPE_FAT); |
| } |
| |
| U_BOOT_CMD( |
| fatrm, 4, 1, do_fat_rm, |
| "delete a file", |
| "<interface> [<dev[:part]>] <filename>\n" |
| " - delete a file from 'dev' on 'interface'" |
| ); |
| |
| static int do_fat_mkdir(cmd_tbl_t *cmdtp, int flag, int argc, |
| char * const argv[]) |
| { |
| return do_mkdir(cmdtp, flag, argc, argv, FS_TYPE_FAT); |
| } |
| |
| U_BOOT_CMD( |
| fatmkdir, 4, 1, do_fat_mkdir, |
| "create a directory", |
| "<interface> [<dev[:part]>] <directory>\n" |
| " - create a directory in 'dev' on 'interface'" |
| ); |
| #endif |