/dts-v1/; | |
/* | |
* (Bogus) example FIT image description file demonstrating the usage | |
* of multiple images loaded by the SPL. | |
* Several binaries will be loaded at their respective load addresses. | |
* Finally the one image specifying an entry point will be entered by the SPL. | |
*/ | |
/ { | |
description = "multiple firmware blobs and U-Boot, loaded by SPL"; | |
#address-cells = <0x1>; | |
images { | |
uboot { | |
description = "U-Boot (64-bit)"; | |
type = "standalone"; | |
arch = "arm64"; | |
compression = "none"; | |
load = <0x4a000000>; | |
}; | |
atf { | |
description = "ARM Trusted Firmware"; | |
type = "firmware"; | |
arch = "arm64"; | |
compression = "none"; | |
load = <0x18000>; | |
entry = <0x18000>; | |
}; | |
mgmt-firmware { | |
description = "arisc management processor firmware"; | |
type = "firmware"; | |
arch = "or1k"; | |
compression = "none"; | |
load = <0x40000>; | |
}; | |
fdt@1 { | |
description = "Pine64+ DT"; | |
type = "flat_dt"; | |
compression = "none"; | |
load = <0x4fa00000>; | |
arch = "arm64"; | |
}; | |
fdt@2 { | |
description = "Pine64 DT"; | |
type = "flat_dt"; | |
compression = "none"; | |
load = <0x4fa00000>; | |
arch = "arm64"; | |
}; | |
kernel { | |
description = "4.7-rc5 kernel"; | |
type = "kernel"; | |
compression = "none"; | |
load = <0x40080000>; | |
arch = "arm64"; | |
}; | |
initrd { | |
description = "Debian installer initrd"; | |
type = "ramdisk"; | |
compression = "none"; | |
load = <0x4fe00000>; | |
arch = "arm64"; | |
}; | |
}; | |
configurations { | |
default = "config@1"; | |
config@1 { | |
description = "sun50i-a64-pine64-plus"; | |
loadables = "uboot", "atf", "kernel", "initrd"; | |
fdt = "fdt@1"; | |
}; | |
config@2 { | |
description = "sun50i-a64-pine64"; | |
loadables = "uboot", "atf", "mgmt-firmware"; | |
fdt = "fdt@2"; | |
}; | |
}; | |
}; |