| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2018 NXP |
| */ |
| |
| #include <common.h> |
| #include <binman_sym.h> |
| #include <log.h> |
| #include <spl.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <errno.h> |
| #include <asm/io.h> |
| #include <asm/arch/ddr.h> |
| #include <asm/arch/ddr.h> |
| #include <asm/sections.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define IMEM_LEN 32768 /* byte */ |
| #define DMEM_LEN 16384 /* byte */ |
| #define IMEM_2D_OFFSET 49152 |
| |
| #define IMEM_OFFSET_ADDR 0x00050000 |
| #define DMEM_OFFSET_ADDR 0x00054000 |
| #define DDR_TRAIN_CODE_BASE_ADDR IP2APB_DDRPHY_IPS_BASE_ADDR(0) |
| |
| binman_sym_declare(ulong, ddr_1d_imem_fw, image_pos); |
| binman_sym_declare(ulong, ddr_1d_imem_fw, size); |
| |
| binman_sym_declare(ulong, ddr_1d_dmem_fw, image_pos); |
| binman_sym_declare(ulong, ddr_1d_dmem_fw, size); |
| |
| #if !IS_ENABLED(CONFIG_IMX8M_DDR3L) |
| binman_sym_declare(ulong, ddr_2d_imem_fw, image_pos); |
| binman_sym_declare(ulong, ddr_2d_imem_fw, size); |
| |
| binman_sym_declare(ulong, ddr_2d_dmem_fw, image_pos); |
| binman_sym_declare(ulong, ddr_2d_dmem_fw, size); |
| #endif |
| |
| /* We need PHY iMEM PHY is 32KB padded */ |
| void ddr_load_train_firmware(enum fw_type type) |
| { |
| u32 tmp32, i; |
| u32 error = 0; |
| unsigned long pr_to32, pr_from32; |
| uint32_t fw_offset = type ? IMEM_2D_OFFSET : 0; |
| unsigned long imem_start = (unsigned long)_end + fw_offset; |
| unsigned long dmem_start; |
| unsigned long imem_len = IMEM_LEN, dmem_len = DMEM_LEN; |
| static enum fw_type last_type = -1; |
| |
| /* If FW doesn't change, we can save the loading. */ |
| if (last_type == type) |
| return; |
| |
| last_type = type; |
| |
| #ifdef CONFIG_SPL_OF_CONTROL |
| if (gd->fdt_blob && !fdt_check_header(gd->fdt_blob)) { |
| imem_start = roundup((unsigned long)_end + |
| fdt_totalsize(gd->fdt_blob), 4) + |
| fw_offset; |
| } |
| #endif |
| |
| dmem_start = imem_start + imem_len; |
| |
| if (BINMAN_SYMS_OK) { |
| switch (type) { |
| case FW_1D_IMAGE: |
| imem_start = binman_sym(ulong, ddr_1d_imem_fw, image_pos); |
| imem_len = binman_sym(ulong, ddr_1d_imem_fw, size); |
| dmem_start = binman_sym(ulong, ddr_1d_dmem_fw, image_pos); |
| dmem_len = binman_sym(ulong, ddr_1d_dmem_fw, size); |
| break; |
| case FW_2D_IMAGE: |
| #if !IS_ENABLED(CONFIG_IMX8M_DDR3L) |
| imem_start = binman_sym(ulong, ddr_2d_imem_fw, image_pos); |
| imem_len = binman_sym(ulong, ddr_2d_imem_fw, size); |
| dmem_start = binman_sym(ulong, ddr_2d_dmem_fw, image_pos); |
| dmem_len = binman_sym(ulong, ddr_2d_dmem_fw, size); |
| #endif |
| break; |
| } |
| } |
| |
| pr_from32 = imem_start; |
| pr_to32 = IMEM_OFFSET_ADDR; |
| for (i = 0x0; i < imem_len; ) { |
| tmp32 = readl(pr_from32); |
| writew(tmp32 & 0x0000ffff, DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32)); |
| pr_to32 += 1; |
| writew((tmp32 >> 16) & 0x0000ffff, |
| DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32)); |
| pr_to32 += 1; |
| pr_from32 += 4; |
| i += 4; |
| } |
| |
| pr_from32 = dmem_start; |
| pr_to32 = DMEM_OFFSET_ADDR; |
| for (i = 0x0; i < dmem_len; ) { |
| tmp32 = readl(pr_from32); |
| writew(tmp32 & 0x0000ffff, DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32)); |
| pr_to32 += 1; |
| writew((tmp32 >> 16) & 0x0000ffff, |
| DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32)); |
| pr_to32 += 1; |
| pr_from32 += 4; |
| i += 4; |
| } |
| |
| debug("check ddr_pmu_train_imem code\n"); |
| pr_from32 = imem_start; |
| pr_to32 = IMEM_OFFSET_ADDR; |
| for (i = 0x0; i < imem_len; ) { |
| tmp32 = (readw(DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32)) & 0x0000ffff); |
| pr_to32 += 1; |
| tmp32 += ((readw(DDR_TRAIN_CODE_BASE_ADDR + |
| ddrphy_addr_remap(pr_to32)) & 0x0000ffff) << 16); |
| |
| if (tmp32 != readl(pr_from32)) { |
| debug("%lx %lx\n", pr_from32, pr_to32); |
| error++; |
| } |
| pr_from32 += 4; |
| pr_to32 += 1; |
| i += 4; |
| } |
| if (error) |
| printf("check ddr_pmu_train_imem code fail=%d\n", error); |
| else |
| debug("check ddr_pmu_train_imem code pass\n"); |
| |
| debug("check ddr4_pmu_train_dmem code\n"); |
| pr_from32 = dmem_start; |
| pr_to32 = DMEM_OFFSET_ADDR; |
| for (i = 0x0; i < dmem_len;) { |
| tmp32 = (readw(DDR_TRAIN_CODE_BASE_ADDR + ddrphy_addr_remap(pr_to32)) & 0x0000ffff); |
| pr_to32 += 1; |
| tmp32 += ((readw(DDR_TRAIN_CODE_BASE_ADDR + |
| ddrphy_addr_remap(pr_to32)) & 0x0000ffff) << 16); |
| if (tmp32 != readl(pr_from32)) { |
| debug("%lx %lx\n", pr_from32, pr_to32); |
| error++; |
| } |
| pr_from32 += 4; |
| pr_to32 += 1; |
| i += 4; |
| } |
| |
| if (error) |
| printf("check ddr_pmu_train_dmem code fail=%d", error); |
| else |
| debug("check ddr_pmu_train_dmem code pass\n"); |
| } |
| |
| void ddrphy_trained_csr_save(struct dram_cfg_param *ddrphy_csr, |
| unsigned int num) |
| { |
| int i = 0; |
| |
| /* enable the ddrphy apb */ |
| dwc_ddrphy_apb_wr(0xd0000, 0x0); |
| dwc_ddrphy_apb_wr(0xc0080, 0x3); |
| for (i = 0; i < num; i++) { |
| ddrphy_csr->val = dwc_ddrphy_apb_rd(ddrphy_csr->reg); |
| ddrphy_csr++; |
| } |
| /* disable the ddrphy apb */ |
| dwc_ddrphy_apb_wr(0xc0080, 0x2); |
| dwc_ddrphy_apb_wr(0xd0000, 0x1); |
| } |
| |
| void *dram_config_save(struct dram_timing_info *timing_info, unsigned long saved_timing_base) |
| { |
| int i = 0; |
| struct dram_timing_info *saved_timing = (struct dram_timing_info *)saved_timing_base; |
| struct dram_cfg_param *cfg; |
| |
| saved_timing->ddrc_cfg_num = timing_info->ddrc_cfg_num; |
| saved_timing->ddrphy_cfg_num = timing_info->ddrphy_cfg_num; |
| saved_timing->ddrphy_trained_csr_num = ddrphy_trained_csr_num; |
| saved_timing->ddrphy_pie_num = timing_info->ddrphy_pie_num; |
| |
| /* save the fsp table */ |
| for (i = 0; i < 4; i++) |
| saved_timing->fsp_table[i] = timing_info->fsp_table[i]; |
| |
| cfg = (struct dram_cfg_param *)(saved_timing_base + |
| sizeof(*timing_info)); |
| |
| /* save ddrc config */ |
| saved_timing->ddrc_cfg = cfg; |
| for (i = 0; i < timing_info->ddrc_cfg_num; i++) { |
| cfg->reg = timing_info->ddrc_cfg[i].reg; |
| cfg->val = timing_info->ddrc_cfg[i].val; |
| cfg++; |
| } |
| |
| /* save ddrphy config */ |
| saved_timing->ddrphy_cfg = cfg; |
| for (i = 0; i < timing_info->ddrphy_cfg_num; i++) { |
| cfg->reg = timing_info->ddrphy_cfg[i].reg; |
| cfg->val = timing_info->ddrphy_cfg[i].val; |
| cfg++; |
| } |
| |
| /* save the ddrphy csr */ |
| saved_timing->ddrphy_trained_csr = cfg; |
| for (i = 0; i < ddrphy_trained_csr_num; i++) { |
| cfg->reg = ddrphy_trained_csr[i].reg; |
| cfg->val = ddrphy_trained_csr[i].val; |
| cfg++; |
| } |
| |
| /* save the ddrphy pie */ |
| saved_timing->ddrphy_pie = cfg; |
| for (i = 0; i < timing_info->ddrphy_pie_num; i++) { |
| cfg->reg = timing_info->ddrphy_pie[i].reg; |
| cfg->val = timing_info->ddrphy_pie[i].val; |
| cfg++; |
| } |
| |
| return (void *)cfg; |
| } |