include/configs/mx6cuboxi.h - filogic/uboot - Gitiles

 /*
  * Copyright (C) 2015 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the SolidRun mx6 based boards
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __MX6CUBOXI_CONFIG_H
 #define __MX6CUBOXI_CONFIG_H

 #include <linux/sizes.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/imx-common/gpio.h>
 #include "mx6_common.h"

 #define CONFIG_MX6
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
 #include "imx6_spl.h"

 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_IMX6_THERMAL
 #define CONFIG_SYS_GENERIC_BOARD

 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 #define CONFIG_MXC_UART
 #define CONFIG_CMD_FUSE
 #define CONFIG_MXC_OCOTP

 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION

 /* Ethernet Configuration */
 #define CONFIG_FEC_MXC
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_FEC_MXC_PHYADDR		0
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS

 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_BAUDRATE			115200

 /* Framebuffer */
 #define CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_IPUV3_CLK		260000000
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_IMX_HDMI
 #define CONFIG_CMD_HDMIDETECT
 #define CONFIG_IMX_VIDEO_SKIP
 #define CONFIG_CONSOLE_MUX

 /* USB */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
 #define CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT \
 	"if hdmidet; then " \
 		"usb start; "		       \
 		"setenv stdin  serial,usbkbd; "\
 		"setenv stdout serial,vga; "   \
 		"setenv stderr serial,vga; "   \
 	"else " \
 		"setenv stdin  serial; " \
 		"setenv stdout serial; " \
 		"setenv stderr serial; " \
 	"fi;"

 #define CONFIG_SYS_NO_FLASH

 /* Command definition */
 #include <config_cmd_default.h>

 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_SETEXPR

 #define CONFIG_BOOTDELAY		1

 #define CONFIG_LOADADDR			0x12000000
 #define CONFIG_SYS_TEXT_BASE		0x17800000

 #define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_CONSOLE_DEV	"ttymxc0"
 #define CONFIG_MMCROOT		"/dev/mmcblk0p2"
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 #define CONFIG_SYS_MMC_ENV_DEV		0	/* SDHC2 */

 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
 	"fdtfile=undefined\0" \
 	"fdt_addr_r=0x18000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"console=" CONFIG_CONSOLE_DEV "\0" \
 	"bootm_size=0x10000000\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=1\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"update_sd_firmware=" \
 		"if test ${ip_dyn} = yes; then " \
 			"setenv get_cmd dhcp; " \
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
 		"if mmc dev ${mmcdev}; then "	\
 			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
 				"setexpr fw_sz ${filesize} / 0x200; " \
 				"setexpr fw_sz ${fw_sz} + 1; "	\
 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 			"fi; "	\
 		"fi\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
 				"bootz ${loadaddr} - ${fdt_addr_r}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
 			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 	"netboot=echo Booting from net ...; " \
 		"run netargs; " \
 		"if test ${ip_dyn} = yes; then " \
 			"setenv get_cmd dhcp; " \
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
 		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
 				"bootz ${loadaddr} - ${fdt_addr_r}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
 			"bootz; " \
 		"fi;\0" \
 	"findfdt="\
 		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-hummingboard.dtb; fi; " \
 		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
 			"setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
 		"if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
 			"setenv fdtfile imx6q-cubox-i.dtb; fi; " \
 		"if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
 			"setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi; \0" \

 #define CONFIG_BOOTCOMMAND \
 	"run findfdt; " \
 	"mmc dev ${mmcdev};" \
 	"if mmc rescan; then " \
 		"if run loadbootscript; then " \
 		"run bootscript; " \
 		"else " \
 			"if run loadimage; then " \
 				"run mmcboot; " \
 			"else run netboot; " \
 			"fi; " \
 		"fi; " \
 	"else run netboot; fi"

 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              256
 #define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

 #define CONFIG_CMDLINE_EDITING

 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* Environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET		(8 * 64 * 1024)

 #define CONFIG_OF_LIBFDT
 #define CONFIG_CMD_CACHE

 #endif                         /* __MX6CUBOXI_CONFIG_H */
	/*
	* Copyright (C) 2015 Freescale Semiconductor, Inc.
	*
	* Configuration settings for the SolidRun mx6 based boards
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/
	#ifndef __MX6CUBOXI_CONFIG_H
	#define __MX6CUBOXI_CONFIG_H

	#include <linux/sizes.h>
	#include <asm/arch/imx-regs.h>
	#include <asm/imx-common/gpio.h>
	#include "mx6_common.h"

	#define CONFIG_MX6
	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	#define CONFIG_SPL_MMC_SUPPORT
	#include "imx6_spl.h"

	#define CONFIG_DISPLAY_CPUINFO
	#define CONFIG_DISPLAY_BOARDINFO
	#define CONFIG_CMDLINE_TAG
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_INITRD_TAG
	#define CONFIG_REVISION_TAG
	#define CONFIG_IMX6_THERMAL
	#define CONFIG_SYS_GENERIC_BOARD

	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
	#define CONFIG_BOARD_EARLY_INIT_F
	#define CONFIG_BOARD_LATE_INIT
	#define CONFIG_MXC_GPIO
	#define CONFIG_MXC_UART
	#define CONFIG_CMD_FUSE
	#define CONFIG_MXC_OCOTP

	/* MMC Configs */
	#define CONFIG_FSL_ESDHC
	#define CONFIG_FSL_USDHC
	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
	#define CONFIG_MMC
	#define CONFIG_CMD_MMC
	#define CONFIG_GENERIC_MMC
	#define CONFIG_BOUNCE_BUFFER
	#define CONFIG_CMD_EXT4
	#define CONFIG_CMD_EXT4_WRITE
	#define CONFIG_CMD_FAT
	#define CONFIG_DOS_PARTITION

	/* Ethernet Configuration */
	#define CONFIG_FEC_MXC
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_NET
	#define CONFIG_MII
	#define IMX_FEC_BASE ENET_BASE_ADDR
	#define CONFIG_FEC_XCV_TYPE RGMII
	#define CONFIG_FEC_MXC_PHYADDR 0
	#define CONFIG_PHYLIB
	#define CONFIG_PHY_ATHEROS

	/* allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE
	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 115200

	/* Framebuffer */
	#define CONFIG_VIDEO
	#define CONFIG_VIDEO_IPUV3
	#define CONFIG_IPUV3_CLK 260000000
	#define CONFIG_CFB_CONSOLE
	#define CONFIG_VGA_AS_SINGLE_DEVICE
	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_SPLASH_SCREEN_ALIGN
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_VIDEO_BMP_LOGO
	#define CONFIG_IMX_HDMI
	#define CONFIG_CMD_HDMIDETECT
	#define CONFIG_IMX_VIDEO_SKIP
	#define CONFIG_CONSOLE_MUX

	/* USB */
	#define CONFIG_CMD_USB
	#define CONFIG_USB_EHCI
	#define CONFIG_USB_EHCI_MX6
	#define CONFIG_USB_STORAGE
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	#define CONFIG_USB_KEYBOARD
	#define CONFIG_SYS_USB_EVENT_POLL
	#define CONFIG_PREBOOT \
	"if hdmidet; then " \
	"usb start; " \
	"setenv stdin serial,usbkbd; "\
	"setenv stdout serial,vga; " \
	"setenv stderr serial,vga; " \
	"else " \
	"setenv stdin serial; " \
	"setenv stdout serial; " \
	"setenv stderr serial; " \
	"fi;"

	#define CONFIG_SYS_NO_FLASH

	/* Command definition */
	#include <config_cmd_default.h>

	#define CONFIG_CMD_BOOTZ
	#define CONFIG_CMD_SETEXPR

	#define CONFIG_BOOTDELAY 1

	#define CONFIG_LOADADDR 0x12000000
	#define CONFIG_SYS_TEXT_BASE 0x17800000

	#define CONFIG_MXC_UART_BASE UART1_BASE
	#define CONFIG_CONSOLE_DEV "ttymxc0"
	#define CONFIG_MMCROOT "/dev/mmcblk0p2"
	#define CONFIG_SYS_FSL_USDHC_NUM 1
	#define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */

	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"fdtfile=undefined\0" \
	"fdt_addr_r=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONFIG_CONSOLE_DEV "\0" \
	"bootm_size=0x10000000\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"update_sd_firmware=" \
	"if test ${ip_dyn} = yes; then " \
	"setenv get_cmd dhcp; " \
	"else " \
	"setenv get_cmd tftp; " \
	"fi; " \
	"if mmc dev ${mmcdev}; then " \
	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	"setexpr fw_sz ${filesize} / 0x200; " \
	"setexpr fw_sz ${fw_sz} + 1; " \
	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	"fi; " \
	"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	"root=${mmcroot}\0" \
	"loadbootscript=" \
	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
	"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
	"mmcboot=echo Booting from mmc ...; " \
	"run mmcargs; " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if run loadfdt; then " \
	"bootz ${loadaddr} - ${fdt_addr_r}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootz; " \
	"else " \
	"echo WARN: Cannot load the DT; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootz; " \
	"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
	"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
	"run netargs; " \
	"if test ${ip_dyn} = yes; then " \
	"setenv get_cmd dhcp; " \
	"else " \
	"setenv get_cmd tftp; " \
	"fi; " \
	"${get_cmd} ${image}; " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
	"bootz ${loadaddr} - ${fdt_addr_r}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootz; " \
	"else " \
	"echo WARN: Cannot load the DT; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootz; " \
	"fi;\0" \
	"findfdt="\
	"if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
	"setenv fdtfile imx6q-hummingboard.dtb; fi; " \
	"if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
	"setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
	"if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
	"setenv fdtfile imx6q-cubox-i.dtb; fi; " \
	"if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
	"setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
	"if test $fdtfile = undefined; then " \
	"echo WARNING: Could not determine dtb to use; fi; \0" \

	#define CONFIG_BOOTCOMMAND \
	"run findfdt; " \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
	"if run loadbootscript; then " \
	"run bootscript; " \
	"else " \
	"if run loadimage; then " \
	"run mmcboot; " \
	"else run netboot; " \
	"fi; " \
	"fi; " \
	"else run netboot; fi"

	/* Miscellaneous configurable options */
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_SYS_HUSH_PARSER
	#define CONFIG_AUTO_COMPLETE
	#define CONFIG_SYS_CBSIZE 256
	#define CONFIG_SYS_MAXARGS 16
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	#define CONFIG_CMDLINE_EDITING

	/* Physical Memory Map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* Environment organization */
	#define CONFIG_ENV_SIZE (8 * 1024)
	#define CONFIG_ENV_IS_IN_MMC
	#define CONFIG_ENV_OFFSET (8 * 64 * 1024)

	#define CONFIG_OF_LIBFDT
	#define CONFIG_CMD_CACHE

	#endif /* __MX6CUBOXI_CONFIG_H */